Name: BIS IS 9550 : 2001(R2015)
Brand: BIS

BRIGHT STEEL BARS - SPECIFICATION

Published date

12-01-2013

Publisher

Bureau of Indian Standards

FOREWORD
1 SCOPE
2 REFERENCES
3 TERMINOLOGY
4 SUPPLY OF MATERIAL
5 MANUFACTURE
6 CHEMICAL COMPOSITION
7 MECHANICAL PROPERTIES
8 DIMENSIONS AND TOLERANCES
9 SURFACE CONDITION
10 SAMPLING
11 OTHER TESTS
12 RETEST
13 SURFACE PRODUCTION AND PACKING
14 MARKING
ANNEX A - BASIS FOR ORDER
ANNEX B - LIST OF REFERRED INDIAN STANDARDS
ANNEX C - METHODS FOR EVALUATING STRAIGHTNESS

Includes cold drawn, turned, tuned and reeled, or ground steel bars of grades and cross sections regarded as generally suitable for heat treatment, for machining into component or for use in 'as finished' condition in constructional applications or other similar purposes, such as for the manufacture or threaded and machined components for general engineering purposes.

Committee	MTD 4
DevelopmentNote	Supersedes BIS IS 7270 & BIS IS 7271. (09/2008)
DocumentType	Standard
PublisherName	Bureau of Indian Standards
Status	Current
Supersedes	BIS IS 7271 : 1974 BIS IS 7270 : 1974

BIS IS 3196-4 : 2001 AMD 2 2009	WELDED LOW CARBON STEEL CYLINDERS EXCEEDING 5 LITRE WATER CAPACITY FOR LOW PRESSURE LIQUEFIABLE GASES - SPECIFICATION - PART 4: CYLINDERS FOR TOXIC AND CORROSIVE GASES
BIS IS 7312 : 1993 AMD 3 2007	WELDED AND SEAMLESS STEEL DISSOLVED ACETYLENE GAS CYLINDER - SPECIFICATION
BIS IS 7283 : 1992(R2001)	HOT-ROLLED BARS FOR PRODUCTION OF BRIGHT BARS AND MACHINED PARTS FOR ENGINEERING APPLICATIONS - SPECIFICATION
BIS IS 11188-1 : 2014 AMD 1 2015	VAULT (STRONG ROOM) DOORS - PART 1: SPECIFICATION

BIS IS 7739-1 : 1975(R2003)	CODE OF PRACTICE FOR PREPARATION OF METALLOGRAPHIC SPECIMENS - PART 1: GENERAL FEATURES
BIS IS 7739-2 : 1975(R2003)	CODE OF PRACTICE FOR PREPARATION OF METALLOGRAPHIC SPECIMENS - PART 2: ELECTROLYTIC POLISHING
BIS IS 3658 : 1999(R2005)	CODE OF PRACTICE FOR LIQUID PENETRANT FLAW DETECTION
BIS IS 1154 : 2000(R2005)	TEMPORARY CORROSION PREVENTIVE FLUID, SOFT FILM, SOLVENT DEPOSITED, WATER DISPLACING - SPECIFICATION
BIS IS 3703 : 2004	RECOMMENDED PRACTICE FOR MAGNETIC PARTICLE FLAW DETECTION
BIS IS 4748 : 2009	STEELS - MICROGRAPHIC DETERMINATION OF THE APPARENT GRAIN SIZE
BIS IS 1956-5 : 1976(R2003)	GLOSSARY OF TERMS RELATING TO IRON AND STEEL - PART 5: BRIGHT STEEL BAR AND STEEL WIRE
BIS IS 2595 : 2008	INDUSTRIAL RADIOGRAPHIC TESTING - CODE OF PRACTICE
BIS IS 4163 : 2004	STEEL - DETERMINATION OF CONTENT OF NON-METALLIC INCLUSIONS - MICROGRAPHIC METHOD USING STANDARD DIAGRAMS
BIS IS 6396 : 2000	METHODS OF MEASURING DECARBURIZED DEPTH OF STEEL
BIS IS 3848 : 1981(R2003)	METHOD FOR END QUENCH TEST FOR HARDENABILITY OF STEEL
BIS IS 1153 : 2000(R2005)	TEMPORARY CORROSION PREVENTIVES, HARD FILM, SOLVENT DEPOSITED - SPECIFICATION
BIS IS 919-2 : 2014	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 2: TABLES OF STANDARD TOLERANCE CLASSES AND LIMIT DEVIATION FOR HOLES SHAFTS
BIS IS 3711 : 2012	STEEL AND STEEL PRODUCTS - LOCATION AND PREPARATION OF SAMPLES AND TEST PIECES FOR MECHANICAL TESTING
BIS IS 3664 : 1981(R2014)	CODE OF PRACTICE FOR ULTRASONIC PULSE ECHO TESTING BY CONTACT AND IMMERSION METHODS
BIS IS 7739-5 : 1976(R2003)	CODE OF PRACTICE FOR PREPARATION OF METALLOGRAPHIC SPECIMENS - PART 5: IRON AND STEEL AND THEIR EXAMINATION
BIS IS 8910 : 2010	GENERAL TECHNICAL DELIVERY REQUIREMENTS FOR STEEL AND STEEL PRODUCTS