Timber for and workmanship in joinery Specification for workmanship

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

31-05-1988

Publisher

British Standards Institution

Foreword
Committees responsible
Specification
0 Introduction
1 Scope
2 Definitions
3 Moisture content
4 Joints permitting movement
5 Adhesives for all framed glued joints, finger joints
    and laminated timber
6 Fixed joints
7 Edge to edge jointed timber
8 Laminated timber
9 Finger jointed timber
10 Adhesives
Appendices
A Guidance on machined surfaces and their treatment
B Guidance on timber movement
C Method of test for the assessment of finger joint
    strength
Tables
1 Guide to the efficiency in bending of some softwood
    finger jointed profiles
2 Number of jointed specimens to be taken from each
    production batch
3 Recording of failure loads for unjointed timber
Figures
1 Typical hand cut, lapped dovetail joint
2 Typical machine cut, lapped dovetail joint
3 Through dovetail joint
4 Secret dovetail joint
5 Restrictions on knots
6 Plain-sawn timber (tangential)
7 Quarter-sawn timber (radial)
8 Illustration of three-point and four-point loading
9 Three-point loading test
10 Four-point loading test

Requirements for the fit of parts in various details of joinery.

This Part of BS 1186 specifies requirements for the fit of parts in various details of joinery, and indicates a degree of care to be exercised in the forming of joints and the application of adhesives.

The suitability and selection of joints for specific applications are not included in this Part of BS 1186.

This Part of BS 1186 does not apply to wood trim.

Guidance on machined surfaces and their treatment and on timber movement are given in Appendix A and Appendix B respectively. Methods of test for the assessment of finger joint strength are given in Appendix C.

NOTE The titles of the publications referred to in this Part of BS 1186 are listed on the inside back cover.

Committee	B/543
DevelopmentNote	Supersedes BS 1186-2(1971) and 86/13650 DC. (06/2004) Reviewed and confirmed by BSI, March 2013. (03/2013)
DocumentType	Standard
Pages	16
PublisherName	British Standards Institution
Status	Current
Supersedes	BS 1186-2:1971

BS ISO 15686-8:2008	Buildings and constructed assets. Service-life planning Reference service life and service-life estimation
BS 8220-3:1990	Guide for security of buildings against crime Warehouses and distribution units
BS 5395-2:1984	Stairs, ladders and walkways Code of practice for the design of helical and spiral stairs
ISO 15686-8:2008	Buildings and constructed assets — Service-life planning — Part 8: Reference service life and service-life estimation
BS 644-1:1989	Wood windows Specification for factory assembled windows of various types
BS 5628-3:2005	CODE OF PRACTICE FOR THE USE OF MASONRY - PART 3: MATERIALS AND COMPONENTS, DESIGN AND WORKMANSHIP
BS 5628-3:2001	Code of practice for use of masonry Materials and components, design and workmanship
BS 585-2:1985	Wood stairs Specification for performance requirements for domestic stairs constructed of wood-based materials
BS 644:2003	Timber windows. Factory assembled windows of various types. Specification
BS 644:2012	Timber windows and doorsets. Fully finished factory-assembled windows and doorsets of various types. Specification
BS 585-1:1984	Wood stairs Specification for straight flight stairs and stairs with quarter or half landings for domestic use
BS 8220-1:1986	Guide for security of buildings against crime Dwellings
BS 459:1988	Specification for matchboarded wooden door leaves for external use
BS 4873:2004	Aluminium alloy windows
BS 4873:2009	Aluminium alloy windows and doorsets. Specification
BS 1186-3:1990	Timber for and workmanship in joinery Specification for wood trim and its fixing
BS 4873:1986	Specification for aluminium alloy windows
BS 4787-1:1980	Internal and external wood doorsets, door leaves and frames Specification for dimensional requirements
BS 4873:2016	Aluminium alloy windows and doorsets. Specification
BS 1186-1:1991	Timber for and workmanship in joinery Specification for timber
BS 5395-1:1977	Stairs, ladders and walkways Code of practice for the design of straight stairs
BS 8220-2:1995	Guide for security of buildings against crime Offices and shops
BS 585-1:1989	Wood stairs Specification for stairs with closed risers for domestic use, including straight and winder flights and quarter or half landings
BS 8000-5:1990	Workmanship on building sites Code of practice for carpentry, joinery and general fixings
BS 644:2009	Timber windows. Fully finished factory-assembled windows of various types. Specification
BS 8220-2:1987	Guide for security of buildings against crime Offices and shops
BS 4092-2:1966	Specification for domestic front entrance gates Wooden gates
BS 5395-3:1985	Stairs, ladders and walkways Code of practice for the design of industrial type stairs, permanent ladders and walkways
BS 5395-1:2000	Stairs, ladders and walkways Code of practice for the design, construction and maintenance of straight stairs and winders
PD 6697:2010	Recommendations for the design of masonry structures to BS EN 1996-1-1 and BS EN 1996-2
BS 5442-3:1979	Classification of adhesives for construction Adhesives for use with wood
BS 5628-3:1985	Code of practice for use of masonry Materials and components, design and workmanship
BS 1195-1:1973	Specification for kitchen fitments and equipment Imperial units with metric equivalents
BS 1285:1980	Specification for wood surrounds for steel windows and doors

BS 6100-4.1(1984) : 1984	GLOSSARY OF BUILDING AND CIVIL ENGINEERING TERMS - FOREST PRODUCTS - CHARACTERISTICS AND PROPERTIES OF TIMBER AND WOOD BASED PANEL PRODUCTS
BS 5082:1986	Specification for water-borne priming paints for woodwork
BS 745:1969	Specification for animal glue for wood (joiners\'s glue) (dry glue; jelly or liquid glue)
BS 6150:1991	Code of practice for painting of buildings
BS 4071:1966	Specification for polyvinyl acetate (PVA) emulsion adhesives for wood
BS 6100-4.3:1984	Glossary of building and civil engineering terms. Forest products Wood based panel products
BS 6100-4.5:1984	Glossary of building and civil engineering terms. Forest products Cork
BS EN 942:2007	Timber in joinery. General requirements
BS 1204-2:1979	Synthetic resin adhesives (phenolic and aminoplastic) for wood Specification for close-contact adhesives
BS 6100-4.4(1985) : 1985	GLOSSARY OF BUILDING AND CIVIL ENGINEERING TERMS - FOREST PRODUCTS - CARPENTRY AND JOINERY
BS 5291:1984	Specification for manufacture of finger joints of structural softwood
BS 6100-4.2:1984	Glossary of building and civil engineering terms. Forest products Sizes and quantities of solid timber

View more information

£142.00

Excluding VAT

Product format

I agree to the DRM document license rules apply against the PDF selection made.

Please confirm that you agree to the document license rules for this document.

I agree to the document license rules .

Please confirm that you agree to the document license rules for this document.

Access your standards online with a subscription

Features

Simple online access to standards, technical information and regulations.
Critical updates of standards and customisable alerts and notifications.
Multi-user online standards collection: secure, flexible and cost effective.

Learn more on subscription solutions

Get in touch with us

BS 1186-2:1988

Timber for and workmanship in joinery Specification for workmanship

Table of Contents

Abstract

Scope

General Product Information

Standards Referenced By This Book

Standards Referencing This Book

Category

Subcategory