• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

BS 3416:1991

Current

Current

The latest, up-to-date edition.

Specification for bitumen-based coatings for cold application, suitable for use in contact with potable water

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

31-10-1991

Committees responsible
Foreword
Specification
1 Scope
2 Definitions
3 Classification
4 Sampling
5 Flash point
6 Drying and over-coating times
7 Finish
8 Protection against corrosion
9 Bend resistance
10 Effect on potable water
11 Shelf life
12 Marking
Appendices
A Guidance on the use of bitumen-based coatings for
    cold application
B Methods of test for performance requirements
C Preparation and coating of test panels

Requirements for two types, each with three classes, of coatings all of which give films that comply with the national requirements for contact with potable water.

This British Standard specifies performance and marking requirements for a range of bitumen-based solvent-borne coatings. It covers coatings for cold application by either brushing, spraying, rolling or dipping processes intended to give a coat for the corrosion protection and water-proofing of substrates including iron and steel.

Two types, each with three classes, are included. All of these give films that are suitable for use on potable water tanks and cisterns as well as for general applications.

The level of gloss of the finished film is not specified in this British Standard.

NOTE 1 These bitumen coatings are neither intended to withstand hot conditions, as on boilers, smoke stacks, etc., for which special coatings should be obtained, nor to resist contamination with mineral oils or paint solvents, all of which conditions will cause softening of the film.

NOTE 2 Guidance on the use of bitumen-based coatings is given in Appendix A, BS 5493 and BS 6150.

NOTE 3 The titles of the publications referred to in this standard are listed on the inside back cover.

Committee
STI/21
DevelopmentNote
Supersedes 91/51890 DC, 92/50765 DC and BS 3416(1988) (07/2005) Supersedes TS 10195A. (11/2005) Reviewed and confirmed by BSI, October 2008. (09/2008)
DocumentType
Standard
Pages
12
PublisherName
British Standards Institution
Status
Current

BS 5493:1977 Code of practice for protective coating of iron and steel structures against corrosion
BS 6949:1991 Specification for bitumen-based coatings for cold application excluding use in contact with potable water
BS 3900-H2:1983 Methods of test for paints. Evaluation of paint and varnish defects Designation of degree of blistering
BS 3900-C2:1971 Methods of test for paints. Tests associated with paint film formation Surface-drying test (ballotini method)
BS 2015:1965 Glossary of paint terms
BS 6150:1991 Code of practice for painting of buildings
BS 3900-A1:1970 Methods of test for paints. Tests on liquid paints (excluding chemical tests) Sampling
BS 3900-E5:1973 Methods of test for paints Pendulum damping test
BS 3900-F4:1968 Methods of test for paints Resistance to continuous salt spray
BS 2523:1966 Specification for lead-based priming paints
BS 245:1976 Specification for mineral solvents (white spirit and related hydrocarbon solvents) for paints and other purposes

View more information
£120.00
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.