DEFSTAN 61-12(PT33)/5(2005) : 2005
Current
The latest, up-to-date edition.
WIRES, CORDS AND CABLES ELECTRICAL - PART 33: AIRFRAME WIRES AND CABLES IN THE TEMPERATURE CATEGORIES OF 135 DEGREES C, 200 DEGREES C AND 260 DEGREES C
Hardcopy , PDF
English
01-08-2005
1 Scope
2 Warning
3 Normative References
4 Definitions
5 Abbreviations
6 Ordering Information
7 Packaging and Labelling
8 Wire and Cable Categorization
8.1 Temperature
8.2 Application
8.3 Identification
8.4 Materials
8.4.1 Conductors
8.4.2 Screens
8.5 Colour
8.6 Multicore Cables
9 Tests
9.1 Visual inspection of plated strands or braid
9.2 Conductor Composition
9.3 Mass Per Unit Length of Conductor
9.4 Strand Plating Continuity
9.5 Tensile Strength and Elongation at Break
10 Tests
10.1 Electrical Resistance After Insulation
10.2 Solderability
10.3 Appearance and Identification
10.4 Mass
10.5 Wire Outer Diameter
10.6 Conductor Strand Adhesion
10.7 Insulation Thickness and Concentricity
10.8 Colour
10.9 Colour Stability
10.10 Colour Fastness to Light
10.11 Insulation Resistance
10.12 High Voltage Immersion
10.13 High Voltage Dry Spark
10.14 High Voltage Dry Impulse
10.15 Surface Resistance
10.16 Overload Resistance
10.17 Resistance to Wet Arc Tracking
10.18 Room Temperature Bend
10.19 Cold Bend
10.20 Adherence of Insulation on Conductor
10.21 Dynamic Cut-Through
10.22 Notch-Propagation Resistance (Applicable to Type 2 only)
10.23 Scrape Abrasion
10.24 Wire to Wire Abrasion (applicable to Type 2 wires only)
10.25 Pliability
10.26 Identification Durability
10.27 Flexing Endurance
10.28 Accelerated Ageing
10.29 Delamination and Shrinkage
10.30 Delamination and Insulation Blocking
10.31 Delamination (tape wrapped insulation)
10.32 Climatic
10.33 Damp Heat - steady state
10.34 Resistance to Solder Heat
10.35 Thermal Endurance
10.36 Resistance to Fluids
10.37 Mould Growth
10.38 Flammability
10.39 Flame Propagation
10.40 Top Coat Durability (tape wrapped constructions with
dip or spray coated outer surface only)
10.41 User Applied Markings
10.41.2 Ultra Violet Laser (excimer laser)
10.42 Resistance to Dry Arc Tracking
11 Tests
11.1 Mass
11.2 Cable Outer Diameter
11.3 Cable to Cable Abrasion (applicable to Type 2 wires only)
11.4 High Voltage Immersion (performed on cores removed
from cables)
11.5 High Voltage Immersion (screen to solution)
11.6 High Voltage Dry Spark
11.7 Cold Bend
11.8 Thermal Endurance
11.9 High Voltage (core to core and core to screen)
11.10 Room Temperature Bend
11.11 Climatic
11.12 Damp Heat Steady State
11.13 Flammability
11.14 Flame Propagation
11.15 Identification Durability
11.16 Dynamic Cut-Through (single core cables)
11.17 Scrape Abrasion to Screen (single core cables)
11.18 Accelerated Ageing
12 Tests
12.1 Jacket Thickness
12.2 Appearance and Identification
12.3 Colour Stability
12.4 Colour Fastness to Light
12.5 Mould Growth
12.6 Resistance to Fluids
13 List of Tests and Sample Sizes
Annex A - Resistance To Wet Arc Tracking Test
A.1 Specimen Requirements
A.2 Preparation of Specimen
A.3 Apparatus
A.3.1 Electrical Equipment
A.4 Test Equipment
A.5 Test Protocol
A.6 Test Rig Set-up
A.7 Method
A.7.1 Test Procedure
A.8 Examination
A.9 Test Report
A.10 Requirements
Annex B - Resistance To Dry Arc Tracking Test
B.1 Specimen Requirements
B.2 Preparation Of Specimen
B.3 Apparatus
B.3.1 Electrical Equipment
B.3.2 Test Equipment
B.3.3 Test Protocol
B.3.4 Test Rig Set-Up
B.3.5 Method
B.3.6 Examination
B.3.7 Test Report
B.3.8 Requirements
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.