DIN EN 14879-2:2007-02
Current
Current
The latest, up-to-date edition.
Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 2: Coatings on metallic components
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
01-02-2007
DevelopmentNote |
Supersedes DIN 28054-1 E, DIN 28054-2 E, DIN 28054-3 E, DIN 28054-4 E and DIN 28054-5 E. (05/2007)
|
DocumentType |
Standard
|
Pages |
64
|
PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
Status |
Current
|
Standards | Relationship |
SN EN 14879-2 : 2007 | Identical |
BS EN 14879-2:2006 | Identical |
NBN EN 14879-2 : 2007 | Identical |
UNI EN 14879-2 : 2007 | Identical |
UNE-EN 14879-2:2007 | Identical |
EN 14879-2:2006 | Identical |
NF EN 14879-2 : 2007 | Identical |
NS EN 14879-2 : 1ED 2006 | Identical |
NEN EN 14879-2 : 2006 | Identical |
I.S. EN 14879-2:2006 | Identical |
ISO 2811-1:2016 | Paints and varnishes — Determination of density — Part 1: Pycnometer method |
EN 13687-3:2002 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Part 3: Thermal cycling without de-icing salt impact |
EN ISO 3001 : 1999 | PLASTICS - EPOXY COMPOUNDS - DETERMINATION OF EPOXY EQUIVALENT |
ISO 813:2016 | Rubber, vulcanized or thermoplastic Determination of adhesion to a rigid substrate 90 degree peel method |
DIN ISO 8130-2 E : 2005 | COATING POWDERS - PART 2: DETERMINATION OF DENSITY BY GAS COMPARISON PYKNOMETER (REFEREE METHOD) |
EN 228:2012+A1:2017 | Automotive fuels - Unleaded petrol - Requirements and test methods |
EN ISO 2431:2011 | Paints and varnishes - Determination of flow time by use of flow cups (ISO 2431:2011) |
EN 14879-1:2005 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 1: Terminology, design and preparation of substrate |
ISO 3219:1993 | Plastics — Polymers/resins in the liquid state or as emulsions or dispersions — Determination of viscosity using a rotational viscometer with defined shear rate |
EN ISO 1043-1:2011/A1:2016 | PLASTICS - SYMBOLS AND ABBREVIATED TERMS - PART 1: BASIC POLYMER AND THEIR SPECIAL CHARACTERISTICS (ISO 1043-1:2011/AMD 1:2016) |
ISO 3001:1999 | Plastics Epoxy compounds Determination of epoxy equivalent |
ISO 8503-2:2012 | Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel — Comparator procedure |
EN ISO 2360:2017 | Non-conductive coatings on non-magnetic electrically conductive base metals - Measurement of coating thickness - Amplitude-sensitive eddy-current method (ISO 2360:2017) |
ISO 2808:2007 | Paints and varnishes Determination of film thickness |
EN 59:2016 | Glass reinforced plastics - Determination of indentation hardness by means of a Barcol hardness tester |
EN ISO 4625-1:2006 | Binders for paints and varnishes - Determination of softening point - Part 1: Ring-and-ball method (ISO 4625-1:2004) |
ISO 8130-2:1992 | Coating powders Part 2: Determination of density by gas comparison pyknometer (referee method) |
DIN 53393:1976-03 | TESTING OF TEXTILE GLASS-REINFORCED PLASTICS; BEHAVIOUR TO THE EFFECT OF CHEMICALS |
EN ISO 2811-2:2011 | Paints and varnishes - Determination of density - Part 2: Immersed body (plummet) method (ISO 2811-2:2011) |
EN 977:1997 | Underground tanks of glass-reinforced plastics (GRP) - Method for one side exposure to fluids |
EN ISO 2409:2013 | Paints and varnishes - Cross-cut test (ISO 2409:2013) |
EN ISO 178:2010/A1:2013 | PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES (ISO 178:2010/AMD 1:2013) |
EN ISO 2064 : 2000 | METALLIC AND OTHER INORGANIC COATINGS - DEFINITIONS AND CONVENTIONS COVERING THE MEASUREMENT OF THICKNESS |
ISO 3882:2003 | Metallic and other inorganic coatings — Review of methods of measurement of thickness |
EN ISO 3251:2008 | Paints, varnishes and plastics - Determination of non-volatile-matter content (ISO 3251:2008) |
ISO 4625-1:2004 | Binders for paints and varnishes Determination of softening point Part 1: Ring-and-ball method |
EN ISO 2811-1:2016 | Paints and varnishes - Determination of density - Part 1: Pycnometer method (ISO 2811-1:2016) |
EN ISO 3882:2003 | Metallic and other inorganic coatings - Review of methods of measurement of thickness (ISO 3882:2003) |
IEC 60167:1964 | Methods of test for the determination of the insulation resistance of solid insulating materials |
ISO 4624:2016 | Paints and varnishes — Pull-off test for adhesion |
ISO 12944-1:2017 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 1: General introduction |
IEC 60093:1980 | Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials |
ISO 2811-2:2011 | Paints and varnishes Determination of density Part 2: Immersed body (plummet) method |
ISO 175:2010 | Plastics Methods of test for the determination of the effects of immersion in liquid chemicals |
EN ISO 8503-2:2012 | Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel - Comparator procedure (ISO 8503-2:2012) |
EN ISO 3219:1994 | Plastics - Polymers/resins in the liquid state or as emulsions or dispersions - Determination of viscosity using a rotational viscometer with defined shear rate (ISO 3219:1993) |
ISO 291:2008 | Plastics Standard atmospheres for conditioning and testing |
EN ISO 4624:2016 | Paints and varnishes - Pull-off test for adhesion (ISO 4624:2016) |
ISO 2815:2003 | Paints and varnishes Buchholz indentation test |
ISO 12944-4:2017 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 4: Types of surface and surface preparation |
ISO 2178:2016 | Non-magnetic coatings on magnetic substrates Measurement of coating thickness Magnetic method |
ISO 2559:2011 | Textile glass Mats (made from chopped or continuous strands) Designation and basis for specifications |
EN ISO 2815:2003 | Paints and varnishes - Buchholz indentation test (ISO 2815:2003) |
EN ISO 291:2008 | Plastics - Standard atmospheres for conditioning and testing (ISO 291:2008) |
ISO 3251:2008 | Paints, varnishes and plastics Determination of non-volatile-matter content |
ISO 554:1976 | Standard atmospheres for conditioning and/or testing — Specifications |
EN ISO 868:2003 | Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003) |
ISO 2409:2013 | Paints and varnishes Cross-cut test |
EN 1081:1998 | Resilient floor coverings - Determination of the electrical resistance |
ISO 527-3:1995 | Plastics Determination of tensile properties Part 3: Test conditions for films and sheets |
ISO 178:2010 | Plastics Determination of flexural properties |
ISO 1043-1:2011 | Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special characteristics |
EN ISO 527-3:1995/AC:2002 | PLASTICS - DETERMINATION OF TENSILE PROPERTIES - PART 3: TEST CONDITIONS FOR FILMS AND SHEETS |
ISO 2064:1996 | Metallic and other inorganic coatings — Definitions and conventions concerning the measurement of thickness |
ISO 1629:2013 | Rubber and latices — Nomenclature |
DIN ISO 8130-2:2005-04 | COATING POWDERS - PART 2: DETERMINATION OF DENSITY BY GAS COMPARISON PYKNOMETER (REFEREE METHOD) |
EN ISO 2808:2007 | Paints and varnishes - Determination of film thickness (ISO 2808:2007) |
EN ISO 175:2010 | Plastics - Methods of test for the determination of the effects of immersion in liquid chemicals (ISO 175:2010) |
ISO 868:2003 | Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness) |
EN ISO 2178:2016 | Non-magnetic coatings on magnetic substrates - Measurement of coating thickness - Magnetic method (ISO 2178:2016) |
ISO 2431:2011 | Paints and varnishes Determination of flow time by use of flow cups |
£156.43
Excluding VAT
GBP
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.