|
BWB TL 8010-0001 : 8ED 2008
|
PRIMERS FOR BUNDESWEHR EQUIPMENT - SOLVENT-BASED AND WATER-THINNABLE - INDUSTRIAL USE
|
|
DIN EN ISO 9117-2:2010-07
|
Paints and varnishes - Drying tests - Part 2: Pressure test for stackability (ISO 9117-2:2010)
|
|
DIN 53781:2016-03
|
PAINTS AND VARNISHES - METHODS FOR TESTING THE RESISTANCE OF COATINGS TO IONIZING RADIATION IN NUCLEAR PLANTS
|
|
DIN 53150:2002-09
|
PAINTS AND VARNISHES - DETERMINATION OF THE DRYING STAGE OF COATINGS (MODIFIED BANDOW-WOLFF METHOD)
|
|
DIN EN ISO 9117-1:2009-10
|
Paints and varnishes - Drying tests - Part 1: Determination of through-dry state and through-dry time (ISO 9117-1:2009)
|
|
DIN EN ISO 6272-2:2011-11
|
Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test, small-area indenter (ISO 6272-2:2011)
|
|
DIN EN ISO 11507:2007-05
|
PAINTS AND VARNISHES - EXPOSURE OF COATINGS TO ARTIFICIAL WEATHERING - EXPOSURE TO FLUORESCENT UV LAMPS AND WATER
|
|
DIN EN ISO 2812-2:2007-05
|
PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART 2: WATER IMMERSION METHOD
|
|
DIN EN ISO 8130-8:2011-02
|
Coating powders - Part 8: Assessment of the storage stability of thermosetting powders (ISO 8130-8:1994)
|
|
DIN EN ISO 17132:2008-01
|
PAINTS AND VARNISHES - T-BEND TEST
|
|
BWB TL 8030-0002 : 5ED 2004
|
|
|
DIN EN ISO 2812-5:2007-05
|
PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART 5: TEMPERATURE-GRADIENT OVEN METHOD
|
|
DIN EN ISO 2812-3:2012-10
|
PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART 3: METHOD USING AN ABSORBENT MEDIUM (ISO 2812-3:2012)
|
|
DIN EN ISO 5659-2:2016-02 (Draft)
|
PLASTICS - SMOKE GENERATION - PART 2: DETERMINATION OF OPTICAL DENSITY BY A SINGLE-CHAMBER TEST (ISO 5659-2:2017)
|
|
DIN EN ISO 6272-1:2011-11
|
Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter (ISO 6272-1:2011)
|
|
DIN EN ISO 14577-4:2015-05 (Draft)
|
METALLIC MATERIALS - INSTRUMENTED INDENTATION TEST FOR HARDNESS AND MATERIALS PARAMETERS - PART 4: TEST METHOD FOR METALLIC AND NON-METALLIC COATINGS (ISO 14577-4:2016)
|
|
DIN EN ISO 1520:2007-11
|
PAINTS AND VARNISHES - CUPPING TEST
|
|
DIN EN ISO 20567-2:2007-01
|
PAINTS AND VARNISHES - DETERMINATION OF STONE-CHIP RESISTANCE OF COATINGS - PART 2: SINGLE-IMPACT TEST WITH A GUIDED IMPACT BODY (ISO 20567-2:2017)
|
|
VDI/VDE 2616 Blatt 2:2014-07
|
Hardness testing of plastics and elastomers
|
|
VDI 3958 Blatt 13:2014-08
|
Environmental simulation - Tropicalisation of paint coatings for outdoor use - Test methods
|
|
BWB TL 6850-0044 : 4ED 2002
|
CLEANING AGENT FOR GENERAL TECHNICAL CLEANING - INCLUDING HIGH-PRESSURE CLEANING
|
|
DIN EN ISO 20567-3:2013-04
|
PAINTS AND VARNISHES - DETERMINATION OF STONE-CHIP RESISTANCE OF COATINGS - PART 3: SINGLE-IMPACT TEST WITH A FREE-FLYING IMPACT BODY (ISO 20567-3:2012)
|
|
BWB TL 8010-0044 : 5ED 2008
|
WASH PRIMER, FREE FROM CHROMATE, FOR THE PRETREATMENT OF METALS - INDUSTRIAL USE
|
|
DIN EN ISO 9117-3:2010-07
|
Paints and varnishes - Drying tests - Part 3: Surface-drying test using ballotini (ISO 9117-3:2010)
|
|
DIN EN ISO 12137:2012-01
|
Paints and varnishes - Determination of mar resistance (ISO 12137:2011)
|
|
BWB TL 8010-0025 : 4ED 1998
|
SEALING VARNISH FOR AMMUNITION - INDUSTRIAL
|
|
DIN EN ISO 6860:2006-06
|
Paints and varnishes - Bend test (conical mandrel) (ISO 6860:2006)
|
|
DIN EN ISO 16862:2006-08
|
Paints and varnishes - Evaluation of sag resistance (ISO 16862:2003)
|
|
DIN EN ISO 11997-2:2013-12
|
PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO CYCLIC CORROSION CONDITIONS - PART 2: WET (SALT FOG)/DRY/HUMIDITY/UV LIGHT (ISO 11997-2:2013)
|
|
DIN EN ISO 1519:2011-04
|
Paints and varnishes - Bend test (cylindrical mandrel) (ISO 1519:2011)
|
|
DIN EN ISO 7253:2002-04
|
PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO NEUTRAL SALT SPRAY (FOG)
|
|
DIN EN ISO 9117-5:2012-11
|
Paints and varnishes - Drying tests - Part 5: Modified Bandow-Wolff test (ISO 9117-5:2012)
|
|
DIN EN ISO 9117-4:2012-11
|
Paints and varnishes - Drying tests - Part 4: Test using a mechanical recorder (ISO 9117-4:2012)
|
|
DIN EN ISO 1522:2007-04
|
Paints and varnishes - Pendulum damping test (ISO 1522:2006)
|
|
DIN EN ISO 16927:2014-06
|
PAINTS AND VARNISHES - DETERMINATION OF THE OVERCOATABILITY AND RECOATABILITY OF A COATING (ISO 16927:2014)
|
|
DIN EN ISO 16474-3:2014-03
|
Paints and varnishes - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps (ISO 16474-3:2013)
|
|
DIN 55655-3:2016-08
|
Paints and varnishes - Electro-deposition paints - Part 3: Compatibility of electro-deposition paints with a reference oil
|
|
DIN EN ISO 1518-2:2012-01
|
PAINTS AND VARNISHES - DETERMINATION OF SCRATCH RESISTANCE - PART 2: VARIABLE-LOADING METHOD (ISO 1518-2:2011)
|
|
DIN EN ISO 8130-12:2011-02
|
COATING POWDERS - PART 12: DETERMINATION OF COMPATIBILITY
|
|
DIN EN ISO 16474-1:2014-03
|
PAINTS AND VARNISHES - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 1: GENERAL GUIDANCE (ISO 16474-1:2013)
|
|
DIN EN ISO 2813:2015-02
|
PAINTS AND VARNISHES - DETERMINATION OF GLOSS VALUE AT 20 DEGREES, 60 DEGREES AND 85 DEGREES (ISO 2813:2014)
|
|
DIN EN ISO 2409:2013-06
|
PAINTS AND VARNISHES - CROSS-CUT TEST (ISO 2409:2013)
|
Important note : All end users must be registered with an Account prior to user licenses being assigned.