EN ISO 20482:2013
Current
The latest, up-to-date edition.
Metallic materials - Sheet and strip - Erichsen cupping test (ISO 20482:2013)
20-11-2013
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and designations
5 Principle
6 Testing equipment
7 Test piece
8 Test conditions
9 Procedure
10 Test report
Annex A (informative) - Recommended composition
of the graphite grease
Bibliography
ISO 20482:2013 specifies a standard test method for determining the ability of metallic sheets and strips having a thickness from 0,1 mm up to 2 mm and a width of 90 mm or greater to undergo plastic deformation in stretch forming.For materials that are thicker and when only narrower strips are available, tools of specified dimensions are provided, in which case subscripts are used, as shown in Table 1.
| Committee |
CEN/TC 459/SC 1
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| NS EN ISO 20482 : 2013 | Identical |
| NEN EN ISO 20482 : 2013 | Identical |
| NF EN ISO 20482 : 2014 | Identical |
| UNI EN ISO 20482 : 2014 | Identical |
| I.S. EN ISO 20482:2013 | Identical |
| SS-EN ISO 20482 : 2013 | Identical |
| BS EN ISO 20482:2013 | Identical |
| UNE-EN ISO 20482:2014 | Identical |
| PN EN ISO 20482 : 2014 | Identical |
| DIN EN ISO 20482 E : 2014 | Identical |
| DIN EN ISO 20482:2014-03 | Identical |
| ISO 20482:2013 | Identical |
| NBN EN ISO 20482 : 2014 | Identical |
| SN EN ISO 20482 : 2014 | Identical |
| 06/30143946 DC : 0 | EN 485-1 - ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
| UNE-EN 10359:2016 | Laser welded tailored blanks - Technical delivery conditions |
| I.S. EN 15311:2007 | THERMAL SPRAYING - COMPONENTS WITH THERMALLY SPRAYED COATINGS - TECHNICAL SUPPLY CONDITIONS |
| DIN EN 10359 E : 2015 | LASER WELDED TAILORED BLANKS - TECHNICAL DELIVERY CONDITIONS |
| BS EN 10359:2015 | Laser welded tailored blanks. Technical delivery conditions |
| DIN EN 546-4:2007-03 | Aluminium and aluminium alloys - Foil - Part 4: Special property requirements |
| I.S. EN 485-1:2016 | ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
| I.S. EN 546-4:2007 | ALUMINIUM AND ALUMINIUM ALLOYS - FOIL - PART 4: SPECIAL PROPERTY REQUIREMENTS |
| KTA 3407 : 2014 | PIPE PENETRATIONS THROUGH THE REACTOR CONTAINMENT VESSEL |
| DIN EN 10359:2015-10 | Laser welded tailored blanks - Technical delivery conditions |
| I.S. EN 10359:2015 | LASER WELDED TAILORED BLANKS - TECHNICAL DELIVERY CONDITIONS |
| EN 485-1:2016 | Aluminium and aluminium alloys - Sheet, strip and plate - Part 1: Technical conditions for inspection and delivery |
| 10/30196823 DC : 0 | BS ISO 12670 - THERMAL SPRAYING - COMPONENTS WITH THERMALLY SPRAYED COATINGS - TECHNICAL SUPPLY CONDITIONS |
| DIN EN 485-1:2016-10 | ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
| BS EN 546-4:2006 | Aluminium and aluminium alloys. Foil Special property requirements |
| BS EN 485-1 : 2008 | ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
| BS EN 15311:2007 | Thermal spraying. Components with thermally sprayed coatings. Technical supply conditions |
| UNE-EN 485-1:2017 | Aluminium and aluminium alloys - Sheet, strip and plate - Part 1: Technical conditions for inspection and delivery |
| EN 546-4:2006 | Aluminium and aluminium alloys - Foil - Part 4: Special property requirements |
| EN 15311:2007 | Thermal spraying - Components with thermally sprayed coatings - Technical supply conditions |
| EN 10359:2015 | Laser welded tailored blanks - Technical delivery conditions |
| DIN EN 15311:2007-06 | THERMAL SPRAYING - COMPONENTS WITH THERMALLY SPRAYED COATINGS - TECHNICAL SUPPLY CONDITIONS |
| ISO 4287:1997 | Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface texture parameters |
| ISO 1302:2002 | Geometrical Product Specifications (GPS) Indication of surface texture in technical product documentation |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.