IEC 60050-300:2001
Current
The latest, up-to-date edition.
International Electrotechnical Vocabulary (IEV) - Part 300: Electrical and electronic measurements and measuring instruments - Part 311: General terms relating to measurements - Part 312: General terms relating to electrical measurements - Part 313: Types of electrical measuring instruments - Part 314: Specific terms according to the type of instrument
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
31-07-2001
FOREWORD
INTRODUCTION XI
NORMATIVE REFERENCES
PART 311: GENERAL TERMS RELATING TO MEASUREMENTS
SECTION 311-01 - BASIC TERMS
SECTION 311-02 - METHODS OF MEASUREMENT
SECTION 311-03 - MEASURING INSTRUMENTS
SECTION 311-04 - STANDARDS
SECTION 311-05 - CONSTRUCTIONAL ELEMENTS
SECTION 311-06 - FACTORS AFFECTING PERFORMANCE
SECTION 311-07 - OPERATING CONDITIONS
PART 312: GENERAL TERMS RELATING TO ELECTRICAL MEASUREMENTS
SECTION 312-01 - BASIC TERMS
SECTION 312-02 - TYPES OF INSTRUMENTS
SECTION 312-03 - ACCESSORIES
SECTION 312-04 - COMPONENT PARTS
SECTION 312-05 - PHYSICAL CHARACTERISTICS
SECTION 312-06 - ELECTRICAL CHARACTERISTICS
SECTION 312-07 - PERFORMANCE
PART 313: TYPES OF ELECTRICAL MEASURING INSTRUMENTS
SECTION 313-01 - DETECTING AND INDICATING INSTRUMENTS
SECTION 313-02 - RECORDERS
SECTION 313-03 - TRANSDUCERS
SECTION 313-04 - STABILIZED POWER SUPPLIES
SECTION 313-05 - OSCILLOSCOPES
SECTION 313-06 - ENERGY METERS
SECTION 313-07 - SIGNAL GENERATORS
SECTION 313-08 - MEASURING BRIDGES
SECTION 313-09 - ACCESSORIES
PART 314: SPECIFIC TERMS ACCORDING TO THE TYPE OF INSTRUMENT
SECTION 314-01 - ANALOGUE INSTRUMENTS
SECTION 314-02 - DIGITAL INSTRUMENTS
SECTION 314-03 - RECORDERS
SECTION 314-04 - TRANSDUCERS
SECTION 314-05 - STABILIZED POWER SUPPLIES
SECTION 314-06 - OSCILLOSCOPES
SECTION 314-07 - ENERGY METERS
SECTION 314-08 - SIGNAL GENERATORS
SECTION 314-09 - MEASURING BRIDGES
Annex A (informative) BIBLIOGRAPHY
INDEX in French, English, Chinese, German, Spanish,
Japanese, Polish, Portuguese and Swedish
It has the status of a horizontal standard in accordance with IEC Guide 108.
DevelopmentNote |
Supersedes IEC 60050-301 (01/2002) NEW CHILD AMD 4 2020 IS NOW ADDED.
|
DocumentType |
Standard
|
Pages |
267
|
ProductNote |
NEW CHILD AMD 4 2020 IS NOW ADDED.
|
PublisherName |
International Electrotechnical Committee
|
Status |
Current
|
Supersedes |
Standards | Relationship |
GOST IEC 60050-300 : 2015 | Identical |
SAC GB/T 2900-89 : 2012 | Identical |
SAC GB/T 2900-90 : 2012 | Identical |
NFC 01 300 : 2001 AMD 2 2017 | Identical |
NEN IEC 60050-300 : 2001 AMD 3 2017 | Identical |
UNE 21302-300:2004 | Identical |
IEC 62056-5-3 REDLINE : 2ED 2016 | ELECTRICITY METERING DATA EXCHANGE - THE DLMS/COSEM SUITE - PART 5-3: DLMS/COSEM APPLICATION LAYER |
EN 61000-4-30:2015/AC:2017-01 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-30: TESTING AND MEASUREMENT TECHNIQUES - POWER QUALITY MEASUREMENT METHODS (IEC 61000-4-30:2015/COR1:2016) |
CEI EN 61298-2 : 2011 | PROCESS MEASUREMENT AND CONTROL DEVICES - GENERAL METHODS AND PROCEDURES FOR EVALUATING PERFORMANCE - PART 2: TESTS UNDER REFERENCE CONDITIONS |
06/30148641 DC : DRAFT SEP 2006 | IEC 60050-112 ED1 - INTERNATIONAL ELECTROTECHNICAL VOCABULARY - PART 112: QUANTITIES AND UNITS |
DIN EN 60359:2002-09 | ELECTRICAL AND ELECTRONIC MEASUREMENT EQUIPMENT - EXPRESSION OF THE PERFORMANCE |
13/30287730 DC : 0 | BS EN 62828 ED 1.0 - REFERENCE CONDITIONS AND PROCEDURES FOR INDUSTRIAL MEASUREMENT TRANSMITTERS - PART 1: GENERAL PROCEDURES FOR ALL TYPES OF TRANSMITTERS |
BS EN 62475:2010 | High-current test techniques. Definitions and requirements for test currents and measuring systems |
BS 8431:2010 | Electrical static meters for secondary metering and sub-metering. Specification |
BS EN 62056-8-5:2017 | Electricity metering data exchange. The DLMS/COSEM suite Narrow-band OFDM G3-PLC communication profile for neighbourhood networks |
BIS IS/IEC 62056-61 : 2006 | ELECTRICITY METERING - DATA EXCHANGE FOR METER READING, TARIFF AND LOAD CONTROL - PART 61: OBJECT IDENTIFICATION SYSTEM (OBIS) |
PD ISO/TS 81346-3:2012 | Industrial systems, installations and equipment and industrial products. Structuring principles and reference designations Application rules for a reference designation system |
CEI EN 60770-2 : 2014 | TRANSMITTERS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 2: METHODS FOR INSPECTION AND ROUTINE TESTING |
CEI EN 62053-52 : 2006 | ELECTRICITY METERING EQUIPMENT (AC) - PARTICULAR REQUIREMENTS - PART 52: SYMBOLS |
CEI EN 60728-5 : 2016 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 5: HEADEND EQUIPMENT |
BS EN 61207-1:2010 | Expression of performance of gas analyzers General |
BS EN 61298-1:2008 | Process measurement and control devices. General methods and procedures for evaluating performance General considerations |
BS EN 62282-3-200:2016 | Fuel cell technologies Stationary fuel cell power systems. Performance test methods |
PREN 50563 : DRAFT 2011 | EXTERNAL A.C. - D.C. AND A.C. - A.C. POWER SUPPLIES - DETERMINATION OF NO-LOAD POWER AND AVERAGE EFFICIENCY OF ACTIVE MODES |
NF EN 60068 2-64 : 2008 | ENVIRONMENTAL TESTING - PART 2-64: TESTS - TEST FH: VIBRATION, BROADBAND RANDOM AND GUIDANCE |
12/30262567 DC : 0 | BS EN 61000-4-30 ED 3 - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-30: TESTING AND MEASUREMENT TECHNIQUES - POWER QUALITY MEASUREMENT METHODS |
UNE-EN 61000-4-30:2015 | Electromagnetic compatibility (EMC) - Part 4-30: Testing and measurement techniques - Power quality measurement methods |
16/30339535 DC : 0 | BS EN 62056-5-3 ED 3.0 - ELECTRICITY METERING DATA EXCHANGE - THE DLMS/COSEM SUITE - PART 5-3: DLMS/COSEM APPLICATION LAYER |
I.S. EN 62056-8-5:2017 | ELECTRICITY METERING DATA EXCHANGE - THE DLMS/COSEM SUITE - PART 8-5: NARROW-BAND OFDM G3-PLC COMMUNICATION PROFILE FOR NEIGHBOURHOOD NETWORKS |
CEI EN 62522 : 2014 | CALIBRATION OF TUNEABLE LASER SOURCES |
CAN/CSA-C22.2 NO. 60896-21:17 | Stationary lead-acid batteries — Part 21: Valve regulated types — Methods of test (Adopted IEC 60896-21:2004, first edition, 2004-02, with Canadian deviations) | Batteries stationnaires au plomb — Partie 21 : Types étanches à soupapes — Méthodes d’essai (norme IEC 60896-21:2004 adoptee, première édition, 2004-02, avec exigences propres au Canada) |
NF EN 50563 : 2013 AMD 1 2014 | EXTERNAL A.C. - D.C. AND A.C. - A.C. POWER SUPPLIES - DETERMINATION OF NO-LOAD POWER AND AVERAGE EFFICIENCY OF ACTIVE MODES |
06/30160027 DC : 0 | BS EN 62055-52 - ELECTRICITY METERING - PAYMENT SYSTEMS - PART 52: STANDARD TRANSFER SPECIFICATION (STS) - PHYSICAL LAYER PROTOCOL FOR A TWO-WAY VIRTUAL TOKEN CARRIER FOR DIRECT LOCAL CONNECTION |
BS EN 62056-9-7:2013 | Electricity metering data exchange. The DLMS/COSEM suite Communication profile for TCP-UDP/IP networks |
BS EN 61000-4-30:2015 | Electromagnetic compatibility (EMC) Testing and measurement techniques. Power quality measurement methods |
CEI EN 62055-31 : 2006 | ELECTRICITY METERING - PAYMENT SYSTEMS - PART 31: PARTICULAR REQUIREMENTS - STATIC PAYMENT METERS FOR ACTIVE ENERGY (CLASSES 1 AND 2) |
CAN/CSA-C393-12 (R2017) | Test methods for measuring power consumption in low and idle power modes of commercial and industrial equipment |
06/30159310 DC : 0 | IEC 61000-4-30 - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-30: TESTING AND MEASUREMENT TECHNIQUES - POWER QUALITY MEASUREMENT METHODS |
CSA IEC 61000-4-12 : 2013 : R2017 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-12: TESTING AND MEASUREMENT TECHNIQUES - RING WAVE IMMUNITY TEST |
DIN 58964 E : 2015 | QUALITY ASSURANCE OF POCT RESULTS - ASSESSMENT CRITERIA FOR COMPARISON MEASUREMENT AND IMPLEMENTATION |
IEC TR 61000-1-6:2012 | Electromagnetic compatibility (EMC) - Part 1-6: General - Guide to the assessment of measurement uncertainty |
CEI 13-85 : 1ED 2017 | ELECTRICITY METERING EQUIPMENT - COMMUNICATION WITH END-USER DEVICES - PART 3-2: PROTOCOL STACK IN THE RF BAND 169 MHZ |
I.S. EN 62052-21:2004 | ELECTRICITY METERING EQUIPMENT (AC) - GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - PART 21: TARIFF AND LOAD CONTROL EQUIPMENT |
CEI UNI 70099 : 2010 | INTERNATIONAL VOCABULARY OF METROLOGY - BASIC AND GENERAL CONCEPTS AND ASSOCIATED TERMS (VIM) |
CEI EN 61000-4-2 : 2011 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-2: TESTING AND MEASUREMENT TECHNIQUES - ELECTROSTATIC DISCHARGE IMMUNITY TEST |
I.S. EN 62056-21:2002 | ELECTRICITY METERING - DATA EXCHANGE FOR METER READING, TARIFF AND LOAD CONTROL - PART 21: DIRECT LOCAL DATA EXCHANGE |
I.S. EN 62056-5-3:2017 | ELECTRICITY METERING DATA EXCHANGE - THE DLMS/COSEM SUITE - PART 5-3: DLMS/COSEM APPLICATION LAYER |
I.S. EN 62282-3-2:2006 | FUEL CELL TECHNOLOGIES - PART 3-2: STATIONARY FUEL CELL POWER SYSTEMS - PERFORMANCE TEST METHODS |
I.S. EN 61000-4-30:2015 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-30: TESTING AND MEASUREMENT TECHNIQUES - POWER QUALITY MEASUREMENT METHODS |
I.S. EN 62282-3-200:2016 | FUEL CELL TECHNOLOGIES - PART 3-200: STATIONARY FUEL CELL POWER SYSTEMS - PERFORMANCE TEST METHODS |
I.S. EN 61557-1:2007 | ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 1: GENERAL REQUIREMENTS |
BS EN 50563 : 2011 | EXTERNAL A.C. - D.C. AND A.C. - A.C. POWER SUPPLIES - DETERMINATION OF NO-LOAD POWER AND AVERAGE EFFICIENCY OF ACTIVE MODES |
BS EN 60770-1:1999 | Transmitters for use in industrial-process control systems Methods for performance evaluation |
I.S. EN 62387-1:2012 | RADIATION PROTECTION INSTRUMENTATION - PASSIVE INTEGRATING DOSIMETRY SYSTEMS FOR ENVIRONMENTAL AND PERSONAL MONITORING - PART 1: GENERAL CHARACTERISTICS AND PERFORMANCE REQUIREMENTS (IEC 62387-1:2007 (MOD)) |
CEI EN 61557-1 : 2008 | ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 1: GENERAL REQUIREMENTS |
I.S. EN 62056-46:2002 | ELECTRICITY METERING - DATA EXCHANGE FOR METER READING, TARIFF AND LOAD CONTROL - PART 46: DATA LINK LAYER USING HDLC PROTOCOL |
IEC 62056-4-7:2015 | Electricity metering data exchange - The DLMS/COSEM suite - Part 4-7: DLMS/COSEM transport layer for IP networks |
IEC 60068-2-64:2008 | Environmental testing - Part 2-64: Tests - Test Fh: Vibration, broadband random and guidance |
IEC 60068-2-80:2005 | Environmental testing - Part 2-80: Tests - Test Fi: Vibration - Mixed mode |
EN 60896-22:2004 | Stationary lead-acid batteries - Part 22: Valve regulated types - Requirements |
EN 60770-1:2011 | Transmitters for use in industrial-process control systems - Part 1: Methods for performance evaluation |
EN 62056-62:2007 | Electricity metering - Data exchange for meter reading, tariff and load control - Part 62: Interface classes |
EN 61207-1:2010 | Expression of performance of gas analyzers - Part 1: General |
EN 62056-46:2002/A1:2007 | ELECTRICITY METERING - DATA EXCHANGE FOR METER READING, TARIFF AND LOAD CONTROL - PART 46: DATA LINK LAYER USING HDLC PROTOCOL |
IEC 62056-5-3:2016 RLV | Electricity metering data exchange - The DLMS/COSEM suite - Part 5-3: DLMS/COSEM application layer |
EN 62056-42:2002 | Electricity metering - Data exchange for meter reading, tariff and load control - Part 42: Physical layer services and procedures for connection-oriented asynchronous data exchange |
EN 62387-1:2012 | Radiation protection instrumentation - Passive integrating dosimetry systems for environmental and personal monitoring - Part 1: General characteristics and performance requirements |
EN 61968-8:2016 | Application integration at electric utilities - System interfaces for distribution management - Part 8: Interfaces for customer operations |
EN 62056-9-7 : 2013 | ELECTRICITY METERING DATA EXCHANGE - THE DLMS/COSEM SUITE - PART 9-7: COMMUNICATION PROFILE FOR TCP-UDP/IP NETWORKS (IEC 62056-9-7:2013) |
EN 50564:2011 | Electrical and electronic household and office equipment - Measurement of low power consumption |
EN 60359:2002 | Electrical and electronic measurement equipment - Expression of performance |
EN 61298-1:2008 | PROCESS MEASUREMENT AND CONTROL DEVICES - GENERAL METHODS AND PROCEDURES FOR EVALUATING PERFORMANCE - PART 1: GENERAL CONSIDERATIONS |
EN 62282-3-200:2016 | Fuel cell technologies - Part 3-200: Stationary fuel cell power systems - Performance test methods |
EN 61968-9:2014 | Application integration at electric utilities - System interfaces for distribution management - Part 9: Interfaces for meter reading and control |
EN 62056-53:2007 | Electricity metering - Data exchange for meter reading, tariff and load control - Part 53: COSEM application layer |
EN 62056-5-3:2017 | Electricity metering data exchange - The DLMS/COSEM suite - Part 5-3: DLMS/COSEM application layer |
EN 61298-3:2008 | Process measurement and control devices - General methods and procedures for evaluating performance - Part 3: Tests for the effects of influence quantities |
EN 62419:2009 | Control technology - Rules for the designation of measuring instruments |
EN 62056-4-7:2016 | Electricity metering data exchange - The DLMS/COSEM suite - Part 4-7: DLMS/COSEM transport layer for IP networks |
EN 62129-2 : 2011 | CALIBRATION OF WAVELENGTH/OPTICAL FREQUENCY MEASUREMENT INSTRUMENTS - PART 2: MICHELSON INTERFEROMETER SINGLE WAVELENGTH METERS |
EN 60060-2:2011 | High-voltage test techniques - Part 2: Measuring systems |
EN 62475 : 2010 | HIGH-CURRENT TEST TECHNIQUES - DEFINITIONS AND REQUIREMENTS FOR TEST CURRENTS AND MEASURING SYSTEMS |
EN 62055-31:2005 | Electricity metering - Payment systems - Part 31: Particular requirements - Static payment meters for active energy (classes 1 and 2) |
EN 60688:2013 | Electrical measuring transducers for converting A.C. and D.C. electrical quantities to analogue or digital signals |
10/30207290 DC : 0 | BS EN 62129-2 - CALIBRATION OF WAVELENGTH/OPTICAL FREQUENCY MEASUREMENT INSTRUMENTS - PART 2: MICHELSON INTERFEROMETER SINGLE WAVELENGTH METERS |
11/30245877 DC : 0 | BS EN 62387 - RADIATION PROTECTION INSTRUMENTATION - PASSIVE INTEGRATING DOSIMETRY SYSTEMS FOR PERSONAL AND ENVIRONMENTAL MONITORING |
BS EN 61000-4-12:2017 | Electromagnetic Compatibility (EMC) Testing and measurement techniques. Ring wave immunity test |
15/30328086 DC | BS EN 61557-12. Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. Equipment for testing, measuring or monitoring of protective measures. Part 12. Power metering and monitoring devices (PMD) |
EN 62056-8-5:2017/AC:2018-01 | ELECTRICITY METERING DATA EXCHANGE - THE DLMS/COSEM SUITE - PART 8-5: NARROW-BAND OFDM G3-PLC COMMUNICATION PROFILE FOR NEIGHBOURHOOD NETWORKS |
13/30276686 DC : 0 | BS EN 61968-6 ED 1.0 - APPLICATION INTEGRATION AT ELECTRIC UTILITIES - SYSTEM INTERFACES FOR DISTRIBUTION MANAGEMENT - PART 6: INTERFACES FOR MAINTENANCE AND CONSTRUCTION |
14/30280137 DC : 0 | BS EN 62282-3-200 ED 2.0 - FUEL CELL TECHNOLOGIES - PART 3-200: STATIONARY FUEL CELL POWER SYSTEMS - PERFORMANCE TEST METHODS |
I.S. EN 62055-31:2006 | ELECTRICITY METERING - PAYMENT SYSTEMS - PART 31: PARTICULAR REQUIREMENTS - STATIC PAYMENT METERS FOR ACTIVE ENERGY (CLASSES 1 AND 2) |
IEC 61557-12:2007 | Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 12: Performance measuring and monitoring devices (PMD) |
BS EN 62056-5-3:2017 | Electrcity metering data exchange. The DLMS/COSEM suite DLMS/COSEM application layer |
BS EN 60359:2002 | Electrical and electronic measurement equipment. Expression of performance |
BS EN 61968-9:2014 | Application integration at electric utilities. System interfaces for distribution management Interfaces for meter reading and control |
07/30162849 DC : 0 | BS ISO/IEC 19796-3 - INFORMATION TECHNOLOGY FOR LEARNING, EDUCATION AND TRAINING - QUALITY - MANAGEMENT, ASSURANCE AND METRICS - PART 3: REFERENCE METHODS AND METRICS |
I.S. EN 50564:2011 | ELECTRICAL AND ELECTRONIC HOUSEHOLD AND OFFICE EQUIPMENT - MEASUREMENT OF LOW POWER CONSUMPTION |
11/30241212 DC : DRAFT JAN 2011 | BS EN 60688 - ELECTRICAL MEASURING TRANSDUCERS FOR CONVERTING A.C. ELECTRICAL QUANTITIES TO ANALOGUE OR DIGITAL SIGNALS |
OIML V 2-200 : 2012 | INTERNATIONAL VOCABULARY OF METROLOGY - BASIC AND GENERAL CONCEPTS AND ASSOCIATED TERMS (VIM) |
I.S. EN 62053-52:2005 | ELECTRICITY METERING EQUIPMENT (AC) - PARTICULAR REQUIREMENTS - PART 52: SYMBOLS |
NF EN 60770-1 : 2011 | TRANSMITTERS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 1: METHODS FOR PERFORMANCE EVALUATION |
UNE-EN 50563:2012 | External a.c. - d.c. and a.c. - a.c. power supplies - Determination of no-load power and average efficiency of active modes |
DIN ISO/TS 16952-1:2007-03 | TECHNICAL PRODUCT DOCUMENTATION - REFERENCE DESIGNATION SYSTEM - PART 1: GENERAL APPLICATION RULES |
14/30280323 DC : 0 | BS EN 60728-5 ED 3.0 - CABLE NETWORKS FOR TELEVISION SIGNALS; SOUND SIGNALS AND INTERACTIVE SERVICES - PART 5: HEADEND EQUIPMENT |
BS EN 62129-2:2011 | Calibration of wavelength/optical frequency measurement instruments Michelson interferometer single wavelength meters |
13/30284056 DC : 0 | BS EN 62055-41 - ELECTRICITY METERING - PAYMENT SYSTEMS - PART 41: STANDARD TRANSFER SPECIFICATION (STS) - APPLICATION LAYER PROTOCOL FOR ONE-WAY TOKEN CARRIER SYSTEMS |
BS EN 62056-53:2007 | Electricity metering. Data exchange for meter reading, tariff and load control COSEM application layer |
06/30119052 DC : DRAFT MAR 2006 | IEC 62387 - PASSIVE INTEGRATING DOSIMETRY SYSTEMS FOR ENVIRONMENTAL AND PERSONAL MONITORING FOR EXTERNAL PHOTON AND BETA RADIATION USING ELECTRONIC DEVICES FOR THE DATA EVALUATION - PART 1: GENERAL CHARACTERISTICS AND PERFORMANCE REQUIREMENTS ON DOSIMETRY SYSTEMS |
11/30242642 DC : 0 | BS EN 62056-5-3 - ELECTRICITY METERING DATA EXCHANGE - THE DLMS/COSEM SUITE - PART 5-3: DLMS/COSEM APPLICATION LAYER |
BS DD8431(2005) : 2005 | ELECTRICAL STATIC METERS FOR SECONDARY METERING AND SUB-METERING - SPECIFICATION |
I.S. EN 60051-1:2017 | DIRECT ACTING INDICATING ANALOGUE ELECTRICAL MEASURING INSTRUMENTS AND THEIR ACCESSORIES - PART 1: DEFINITIONS AND GENERAL REQUIREMENTS COMMON TO ALL PARTS - PROPOSED HORIZONTAL STANDARD |
CEI EN 62056-7-5 : 1ED 2017 | ELECTRICITY METERING DATA EXCHANGE - THE DLMS/COSEM SUITE - PART 7-5: LOCAL DATA TRANSMISSION PROFILES FOR LOCAL NETWORKS (LN) |
16/30340202 DC : 0 | BS EN 61000-4-12 ED3.0 - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-12: TESTING AND MEASUREMENT TECHNIQUES - RING WAVE IMMUNITY TEST |
I.S. EN 61987-1:2007 | INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL - DATA STRUCTURES AND ELEMENTS IN PROCESS EQUIPMENT CATALOGUES - PART 1: MEASURING EQUIPMENT WITH ANALOGUE AND DIGITAL OUTPUT |
17/30349154 DC : 0 | BS ISO 20146 - VACUUM TECHNOLOGY - VACUUM GAUGES - SPECIFICATIONS, CALIBRATION AND MEASUREMENT UNCERTAINTIES FOR CAPACITANCE DIAPHRAGM GAUGE |
I.S. EN 61298-1:2008 | PROCESS MEASUREMENT AND CONTROL DEVICES - GENERAL METHODS AND PROCEDURES FOR EVALUATING PERFORMANCE - PART 1: GENERAL CONSIDERATIONS |
06/30150602 DC : DRAFT MAY 2006 | BS IEC - 61000-4-30 - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-30: TESTING AND MEASUREMENT TECHNIQUES - POWER QUALITY MEASUREMENT METHODS |
I.S. EN 61968-100:2013 | APPLICATION INTEGRATION AT ELECTRIC UTILITIES - SYSTEM INTERFACES FOR DISTRIBUTION MANAGEMENT - PART 100: IMPLEMENTATION PROFILES (IEC 61968-100:2013 (EQV)) |
08/30192767 DC : 0 | BS EN 62301 - HOUSEHOLD ELECTRICAL APPLIANCES - MANAGEMENT OF STANDBY POWER |
CEI EN 61298-4 : 2011 | PROCESS MEASUREMENT AND CONTROL DEVICES - GENERAL METHODS AND PROCEDURES FOR EVALUATING PERFORMANCE - PART 4: EVALUATION REPORT CONTENT |
BS EN 60068-2-55:2013 | Environmental testing Tests. Test Ee and guidance. Loose cargo testing including bounce |
CEI EN 62129-2 : 2012 | CALIBRATION OF WAVELENGTH/OPTICAL FREQUENCY MEASUREMENT INSTRUMENTS - PART 2: MICHELSON INTERFEROMETER SINGLE WAVELENGTH METERS |
IEC TR 61000-5-6:2002 | Electromagnetic compatibility (EMC) - Part 5-6: Installation and mitigation guidelines - Mitigation of external EM influences |
UNE-EN 61557-12:2010 | Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures -- Part 12: Performance measuring and monitoring devices (PMD) |
IEC TS 61968-14:2015 | Application integration at electric utilities - System interfaces for distribution management - Part 14: MultiSpeak - CIM harmonization |
NF EN 62056-42 : 2003 | ELECTRICITY METERING - DATA EXCHANGE FOR METER READING, TARIFF AND LOAD CONTROL - PART 42: PHYSICAL LAYER SERVICES AND PROCEDURES FOR CONNECTION-ORIENTED ASYNCHRONOUS DATA EXCHANGE |
NF EN 60770-2 : 2011 | TRANSMITTERS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 2: METHODS FOR INSPECTION AND ROUTINE TESTING |
CISPR TR 16-4-5:2006+AMD1:2014 CSV | Specification for radio disturbance and immunity measuring apparatusand methods - Part 4-5: Uncertainties, statistics and limit modelling - Conditions for the use of alternative test methods |
I.S. EN 62129-2:2011 | CALIBRATION OF WAVELENGTH/OPTICAL FREQUENCY MEASUREMENT INSTRUMENTS - PART 2: MICHELSON INTERFEROMETER SINGLE WAVELENGTH METERS |
BIS IS 14976 : 2012 | CALIBRATION OF FIBRE-OPTIC POWER METERS |
I.S. EN 60068-2-64:2008 | ENVIRONMENTAL TESTING - PART 2-64: TESTS - TEST FH: VIBRATION, BROADBAND RANDOM AND GUIDANCE |
BS EN 60896-21:2004 | Stationary lead-acid batteries Valve regulated types. Methods of test |
BS EN 62052-21 : 2004 | ELECTRICITY METERING EQUIPMENT (A.C.) - GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - PART 21: TARIFF AND LOAD CONTROL EQUIPMENT (IEC 62052-21:2004) |
I.S. EN 50470-1:2006 | ELECTRICITY METERING EQUIPMENT (A.C.) - PART 1: GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - METERING EQUIPMENT (CLASS INDEXES A, B AND C) |
UNE-EN ISO 18113-1:2012 | In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 1: Terms, definitions and general requirements (ISO 18113-1:2009) |
NF EN 62129-2 : 2011 | CALIBRATION OF WAVELENGTH/OPTICAL FREQUENCY MEASUREMENT INSTRUMENTS - PART 2: MICHELSON INTERFEROMETER SINGLE WAVELENGTH METERS |
ISO 23552-1:2007 | Safety and control devices for gas and/or oil burners and gas and/or oil appliances — Particular requirements — Part 1: Fuel/air ratio controls, electronic type |
ISO/TS 16952-1:2006 | Technical product documentation Reference designation system Part 1: General application rules |
IEC 60051-1:2016 | Direct acting indicating analogue electrical measuring instruments and their accessories - Part 1: Definitions and general requirements common to all parts |
IEC 60359:2001 | Electrical and electronic measurement equipment - Expression of performance |
I.S. EN 61003-1:2016 | INDUSTRIAL-PROCESS CONTROL SYSTEMS - INSTRUMENTS WITH ANALOGUE INPUTS AND TWO- OR MULTI-POSITION OUTPUTS - PART 1: METHODS FOR EVALUATING PERFORMANCE |
IEC 62055-51:2007 | Electricity metering - Payment systems - Part 51: Standard transfer specification (STS) - Physical layer protocol for one-way numeric and magnetic card token carriers |
IEC 60060-2:2010 | High-voltage test techniques - Part 2: Measuring systems |
IEC 61000-4-12:2017 | Electromagnetic Compatibility (EMC) - Part 4-12: Testing and measurement techniques - Ring wave immunity test |
05/30132667 DC : DRAFT APR 2005 | IEC 62056-61 ED 2 - ELECTRICITY METERING - DATA EXCHANGE FOR METER READING, TARIFF AND LOAD CONTROL - PART 61: OBJECT IDENTIFICATION SYSTEM (OBIS) |
12/30264563 DC : 0 | BS EN IEC 61968-9 - APPLICATION INTEGRATION AT ELECTRIC UTILITIES - SYSTEM INTERFACES FOR DISTRIBUTION MANAGEMENT - PART 9: INTERFACES FOR METER READING AND CONTROL |
BS EN 62056-46:2002 | Electricity metering. Data exchange for meter reading, tariff and load control Data link layer using HDLC protocol |
CEI EN 60896-22 : 2005 | STATIONARY LEAD-ACID BATTERIES - PART 22: VALVE REGULATED TYPES - REQUIREMENTS |
CEI EN 60896-21 : 2005 | STATIONARY LEAD-ACID BATTERIES - PART 21: VALVE REGULATED TYPES - METHODS OF TEST |
DIN SPEC 1330 : 2013 | INDUSTRIAL SYSTEMS, INSTALLATIONS AND EQUIPMENT AND INDUSTRIAL PRODUCTS - STRUCTURING PRINCIPLES AND REFERENCE DESIGNATIONS - PART 3: APPLICATION RULES FOR A REFERENCE DESIGNATION SYSTEM (ISO/TS 81346-3:2012) |
NF EN 62056-21 : 2003 | ELECTRICITY METERING - DATA EXCHANGE FOR METER READING, TARIFF AND LOAD CONTROL - PART 21: DIRECT LOCAL DATA EXCHANGE |
12/30257256 DC : 0 | BS EN 61968-100 - APPLICATION INTEGRATION AT ELECTRIC UTILITIES - SYSTEM INTERFACES FOR DISTRIBUTION MANAGEMENT - PART 100: IMPLEMENTATION PROFILES |
02/208921 DC : DRAFT AUG 2002 | IEC 62052-21 ED.1 - ELECTRICITY METERING EQUIPMENT (A.C.) - GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - PART 21: TARIFF AND LOAD CONTROL EQUIPMENT |
10/30173701 DC : 0 | BS EN 62282-3-200 - FUEL CELL TECHNOLOGIES - PART 3-200: STATIONARY FUEL CELL POWER SYSTEMS - PERFORMANCE TEST METHODS |
I.S. EN 61000-4-12:2017 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-12: TESTING AND MEASUREMENT TECHNIQUES - RING WAVE IMMUNITY TEST |
CEI EN 62052-21 : 2005 | ELECTRICITY METERING EQUIPMENT (AC) - GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - PART 21: TARIFF AND LOAD CONTROL EQUIPMENT |
06/30150072 DC : DRAFT MAY 2006 | IEC 62055-51 - ELECTRICITY METERING - PAYMENT SYSTEMS - PART 51: STANDARD TRANSFER SPECIFICATION - PHYSICAL LAYER PROTOCOL FOR ONE-WAY NUMERIC AND MAGNETIC CARD TOKEN CARRIERS |
BS EN 61968-100:2013 | Application integration at electric utilities. System interfaces for distribution management Implementation profiles |
BS EN 62056-21:2002 | Electricity metering. Data exchange for meter reading, tariff and load control Direct local data exchange |
CEI EN 61298-1 : 2011 | PROCESS MEASUREMENT AND CONTROL DEVICES - GENERAL METHODS AND PROCEDURES FOR EVALUATING PERFORMANCE - PART 1: GENERAL CONSIDERATIONS |
PD IEC/TR 61000-1-6:2012 | Electromagnetic compatibility (EMC) General. Guide to the assessment of measurement uncertainty |
CEI EN 62056-21 : 2003 | ELECTRICITY METERING - DATA EXCHANGE FOR METER READING, TARIFF AND LOAD CONTROL PART 21: DIRECT LOCAL DATA EXCHANGE |
BS EN 60688:2013 | Electrical measuring transducers for converting A.C. and D.C. electrical quantities to analogue or digital signals |
PD IEC TR 61000-5-6:2002 | Electromagnetic compatibility (EMC). Installation and mitigation guidelines Mitigation of external EM influences |
BS EN 60060-2:1995 | High-voltage test techniques Measuring systems |
UNE-ISO/IEC GUIA 99:2012 IN | International vocabulary of metrology. Basics and general concepts and associated terms (VIM) |
I.S. EN ISO 18113-1:2011 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - INFORMATION SUPPLIED BY THE MANUFACTURER (LABELLING) - PART 1: TERMS, DEFINITIONS AND GENERAL REQUIREMENTS (ISO 18113-1:2009) |
CEI EN 62056-42 : 2003 | ELECTRICITY METERING - DATA EXCHANGE FOR METER READING, TARIFF AND LOAD CONTROL - PART 42: PHYSICAL LAYER SERVICES AND PROCEDURES |
03/314481 DC : DRAFT SEP 2003 | IEC 62053-52 ED 1.0 - ELECTRICITY METERING EQUIPMENT - PARTICULAR REQUIREMENTS - PART 52: SYMBOLS |
BS EN 62056-47:2007 | Electricity metering. Data exchange for meter reading, tariff and load control COSEM transport layers for IPv4 networks |
18/30342107 DC : DRAFT APR 2018 | BS EN 61315 - CALIBRATION OF FIBRE-OPTIC POWER METERS |
BS EN 50463:2007 | Railway applications. Energy measurement on board trains |
I.S. EN 61315:2006 | CALIBRATION OF FIBRE-OPTIC POWER METERS |
CSA C61000-4-30 : 2010 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-30: TESTING AND MEASUREMENT TECHNIQUES - POWER QUALITY MEASUREMENT METHODS |
CSA IEC 61000-4-12 : 2013 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-12: TESTING AND MEASUREMENT TECHNIQUES - RING WAVE IMMUNITY TEST |
ISO/IEC Guide 99:2007 | International vocabulary of metrology Basic and general concepts and associated terms (VIM) |
11/30244727 DC : 0 | BS EN 62056-9-7 - ELECTRICITY METERING DATA EXCHANGE - THE DLMS/COSEM SUITE - PART 9-7: COMMUNICATION PROFILE FOR TCP-UDP/IP NETWORKS |
ASTM E 2919 : 2014 : REDLINE | Standard Test Method for Evaluating the Performance of Systems that Measure Static, Six Degrees of Freedom (6DOF), Pose |
08/30176950 DC : DRAFT JAN 2008 | BS EN 60770-2 - TRANSMITTERS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 2: METHODS FOR INSPECTION AND ROUTINE TESTING |
02/203214 DC : DRAFT MAR 2002 | IEC 62282-3-2 - FUEL CELL TECHNOLOGIES - PART 3-2: STATIONARY FUEL CELL POWER PLANTS - TEST METHODS FOR THE PERFORMANCE |
CSA C393 : 2012 | TEST METHODS FOR MEASURING POWER CONSUMPTION IN LOW AND IDLE POWER MODES OF COMMERCIAL AND INDUSTRIAL EQUIPMENT |
CAN/CSA-IEC 61000-4-2:12 (R2017) | Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test (Adopted IEC 61000-4- 2:2008, second edition, 2008-12) | Compatibilité électromagnétique (CEM) - Partie 4-2: Techniques d\'essai et de mesure - Essai d\'immunité aux décharges électrostatiques (norme CEI 61000-4-2:2008 adoptée, deuxième édition, 2008-12) |
I.S. EN 62056-9-7:2013 | ELECTRICITY METERING DATA EXCHANGE - THE DLMS/COSEM SUITE - PART 9-7: COMMUNICATION PROFILE FOR TCP-UDP/IP NETWORKS (IEC 62056-9-7:2013 (EQV)) |
I.S. EN 61298-2:2008 | PROCESS MEASUREMENT AND CONTROL DEVICES - GENERAL METHODS AND PROCEDURES FOR EVALUATING PERFORMANCE - PART 2: TESTS UNDER REFERENCE CONDITIONS |
NF EN 62052-11 : 2003 AMD 1 2017 | ELECTRICITY METERING EQUIPMENT (A.C.) - GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - PART 11: METERING EQUIPMENT |
I.S. EN 60060-2:2011 | HIGH-VOLTAGE TEST TECHNIQUES - PART 2: MEASURING SYSTEMS |
CEI EN 60770-1 : 2014 | TRANSMITTERS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 1: METHODS FOR PERFORMANCE EVALUATION |
I.S. EN 62056-61:2007 | ELECTRICITY METERING - DATA EXCHANGE FOR METER READING, TARIFF AND LOAD CONTROL - PART 61: OBJECT IDENTIFICATION SYSTEM (OBIS) |
I.S. EN 61968-8:2016 | APPLICATION INTEGRATION AT ELECTRIC UTILITIES - SYSTEM INTERFACES FOR DISTRIBUTION MANAGEMENT - PART 8: INTERFACES FOR CUSTOMER OPERATIONS |
I.S. EN 61968-9:2014 | APPLICATION INTEGRATION AT ELECTRIC UTILITIES - SYSTEM INTERFACES FOR DISTRIBUTION MANAGEMENT - PART 9: INTERFACES FOR METER READING AND CONTROL |
I.S. EN 62056-62:2007 | ELECTRICITY METERING - DATA EXCHANGE FOR METER READING, TARIFF AND LOAD CONTROL - PART 62: INTERFACE CLASSES |
I.S. EN 60068-2-80:2005 | ENVIRONMENTAL TESTING - PART 2-80: TESTS - TEST FI: VIBRATION - MIXED MODE |
I.S. EN 62056-53:2007 | ELECTRICITY METERING - DATA EXCHANGE FOR METER READING, TARIFF AND LOAD CONTROL - PART 53: COSEM APPLICATION LAYER |
I.S. EN 61557-12:2008 | ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 12: PERFORMANCE MEASURING AND MONITORING DEVICES (PMD) |
BS EN 62301:2005 | Household electrical appliances. Measurement of standby power |
UNE 80407:2014 | Metrological control of measuring equipment used in the cement test |
CSA CEI/IEC 61000.4.4 : 2006 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-4: TESTING AND MEASUREMENT TECHNIQUES - ELECTRICAL FAST TRANSIENT/BURST IMMUNITY TEST |
IEC 62301:2011 | Household electrical appliances - Measurement of standby power |
I.S. EN 50463:2007 | RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS |
IEC 61000-4-12 : 3.0 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-12: TESTING AND MEASUREMENT TECHNIQUES - RING WAVE IMMUNITY TEST |
I.S. EN 61207-1:2010 | EXPRESSION OF PERFORMANCE OF GAS ANALYZERS - PART 1: GENERAL |
IEC 62255-1:2003 | Multicore and symmetrical pair/quad cables for broadband digital communications (high bit rate digital access telecommunication networks) - Outside plant cables - Part 1: Generic specification |
IEC 62522:2014 | Calibration of tuneable laser sources |
IEC PAS 62419:2005 | Control technology - Rules for the designation of measuring instruments |
IEC 62056-5-3:2017 | Electrcity metering data exchange - The DLMS/COSEM suite - Part 5-3: DLMS/COSEM application layer |
CISPR TR 16-3:2010+AMD1:2012+AMD2:2015 CSV | Specification for radio disturbance and immunity measuring apparatus and methods - Part 3: CISPR technical reports |
IEC 61000-4-12:2017 RLV | Electromagnetic Compatibility (EMC) - Part 4-12: Testing and measurement techniques - Ring wave immunity test |
IEC 62282-3-200:2015 | Fuel cell technologies - Part 3-200: Stationary fuel cell power systems - Performance test methods |
IEC 62056-53:2006 | Electricity metering - Data exchange for meter reading, tariff and load control - Part 53: COSEM application layer |
IEC 61003-1:2016 | Industrial-process control systems - Instruments with analogue inputs and two- or multi-position outputs - Part 1: Methods for evaluating performance |
IEC 61968-9:2013 | Application integration at electric utilities - System interfaces for distribution management - Part 9: Interfaces for meter reading and control |
IEC 61298-4:2008 | Process measurement and control devices - General methods and procedures for evaluating performance - Part 4: Evaluation report content |
IEC 62056-7-5:2016 | Electricity metering data exchange - The DLMS/COSEM suite - Part 7-5: Local data transmission profiles for Local Networks (LN) |
CEI EN 60068-2-64 : 2012 | ENVIRONMENTAL TESTING - PART 2-64: TESTS - TEST FH: VIBRATION, BROADBAND RANDOM AND GUIDANCE |
CEI EN 61298-3 : 2011 | PROCESS MEASUREMENT AND CONTROL DEVICES - GENERAL METHODS AND PROCEDURES FOR EVALUATING PERFORMANCE - PART 3: TESTS FOR THE EFFECTS OF INFLUENCE QUANTITIES |
04/19975018 DC : DRAFT AUG 2004 | |
08/30176946 DC : DRAFT JAN 2008 | BS EN 60770-1 - TRANSMITTERS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 1: METHODS FOR PERFORMANCE EVALUATION |
I.S. EN 62056-4-7:2016 | ELECTRICITY METERING DATA EXCHANGE - THE DLMS/COSEM SUITE - PART 4-7: DLMS/COSEM TRANSPORT LAYER FOR IP NETWORKS |
CEI EN 60359 : 2002 | ELECTRICAL AND ELECTRONIC MEASUREMENT EQUIPMENT - EXPRESSION OF PERFORMANCE |
DD ISO/TS 16952-1:2007 | Technical product documentation. Reference designation system General application rules |
BS EN 62056-61:2007 | Electricity metering. Data exchange for meter reading, tariff and load control Object identification system (OBIS) |
14/30295856 DC : 0 | BS EN 61003-1 ED. 3.0 - INDUSTRIAL-PROCESS CONTROL SYSTEMS - INSTRUMENTS WITH ANALOGUE INPUTS AND TWO- OR MULTI-POSITION OUTPUTS - PART 1: METHODS OF EVALUATING THE PERFORMANCE |
CEI EN 60068-2-55 : 2014 | ENVIRONMENTAL TESTING - PART 2-55: TESTS - TEST EE AND GUIDANCE: LOOSE CARGO TESTING INCLUDING BOUNCE |
12/30271967 DC : 0 | BS EN 61968-6 - APPLICATION INTEGRATION AT ELECTRIC UTILITIES - SYSTEM INTERFACES FOR DISTRIBUTION MANAGEMENT - PART 6: INTERFACES FOR MAINTENANCE AND CONSTRUCTION |
BS EN 62056-4-7:2016 | Electricity metering data exchange. The DLMS/COSEM suite DLMS/COSEM transport layer for IP networks |
IEC TS 62056-6-9:2016 | Electricity metering data exchange - The DLMS/COSEM suite - Part 6-9: Mapping between the Common Information Model message profiles (IEC 61968-9) and DLMS/COSEM (IEC 62056) data models and protocols |
DIN 58964:2015-09 | Quality assurance of POCT results - Assessment criteria for comparison measurement and implementation |
12/30259698 DC : 0 | BS EN 14307:2009/A1 - THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE EXTRUDED POLYSTYRENE FOAM (XPS) PRODUCTS - SPECIFICATION |
BS EN 61298-4:2008 | Process measurement and control devices. General methods and procedures for evaluating performance Evaluation report content |
BS EN 61298-2:2008 | Process measurement and control devices. General methods and procedures for evaluating performance Tests under reference conditions |
IEC TR 62540:2009 | Radio frequency identification (RFID) for stationary lead acid cells and monoblocs - Tentative requirements |
BS EN 62387-1:2012 | Radiation protection instrumentation. Passive integrating dosimetry systems for environmental and personal monitoring General characteristics and performance requirements |
BS IEC 62056-8-5 : 2017 COR 2018 | ELECTRICITY METERING DATA EXCHANGE - THE DLMS/COSEM SUITE - PART 8-5: NARROW-BAND OFDM G3-PLC COMMUNICATION PROFILE FOR NEIGHBOURHOOD NETWORKS |
BS EN 62053-52:2005 | Electricity metering equipment (AC). Particular requirements Symbols |
BS EN 62522:2014 | Calibration of tuneable laser sources |
04/30126746 DC : DRAFT DEC 2004 | ISO 13584-501 - INDUSTRIAL AUTOMATION SYSTEMS AND INTEGRATION - PARTS LIBRARY - PART 501: REFERENCE DICTIONARY FOR MEASURING INSTRUMENTS - REGISTRATION PROCEDURE |
10/30216016 DC : 0 | BS EN 61326-2-3 - ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - EMC REQUIREMENTS - PART 2-3: PARTICULAR REQUIREMENTS - TEST CONFIGURATIONS, OPERATIONAL CONDITIONS AND PERFORMANCE CRITERIA FOR TRANSDUCERS WITH INTEGRATED OR REMOTE SIGNAL CONDITIONING |
PD IEC/TS 62056-6-9:2016 | Electricity metering data exchange. The DLMS/COSEM suite Mapping between the Common Information Model message profiles (IEC 61968-9) and DLMS/COSEM (IEC 62056) data models and protocols |
BS EN 61003-1:2016 | Industrial-process control systems. Instruments with analogue inputs and two- or multi-position outputs Methods for evaluating performance |
CEI EN 61003-1 : 2005 | INDUSTRIAL-PROCESS CONTROL SYSTEMS - INSTRUMENTS WITH ANALOGUE INPUTS AND TWO- OR MULTI-POSITION OUTPUTS - PART 1: METHODS FOR EVALUATING PERFORMANCE |
BS EN 61968-8:2016 | Application integration at electric utilities. System interfaces for distribution management Interfaces for customer operations |
03/309903 DC : DRAFT JUNE 2003 | IEC 61315 ED.2.0 - CALIBRATION OF FIBRE-OPTIC POWER METERS |
UNE-IEC 60050-112:2012 | International Electrotechnical Vocabulary (IEV) - Part 112: Quantities and units |
BS EN 61987-1:2007 | Industrial-process measurement and control. Data structures and elements in process equipment catalogues Measuring equipment with analogue and digital output |
BS EN 60068-2-80:2005 | Environmental testing Tests - Test Fi: Vibration. Mixed mode |
CSA IEC 61000.4.2 : 2012 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-2: TESTING AND MEASUREMENT TECHNIQUES - ELECTROSTATIC DISCHARGE IMMUNITY TEST |
BS ISO/IEC 19796-3:2009 | Information technology. Learning, education and training. Quality management, assurances and metrics Reference methods and metrics |
BS EN 62282-3-2:2006 | Fuel cell technologies Stationary fuel cell power systems. Performance test methods |
CAN/CSA-C62301:2011(R2016) | HOUSEHOLD ELECTRICAL APPLIANCES - MEASUREMENT OF STANDBY POWER |
UNI CEI 70099 : 2008 | INTERNATIONAL VOCABULARY OF METROLOGY - BASIC AND GENERAL CONCEPTS AND ASSOCIATED TERMS (VIM) |
BIS IS/IEC 62056-53 : 2006 | ELECTRICITY METERING - DATA EXCHANGE FOR METER READING, TARIFF AND LOAD CONTROL - PART 53: COSEM APPLICATION LAYER |
BIS IS/IEC 62056-62 : 2006 | ELECTRICITY METERING - DATA EXCHANGE FOR METER READING, TARIFF AND LOAD CONTROL - PART 62: INTERFACE CLASSES |
UNE-EN 60060-2:2012 | High-voltage test techniques -- Part 2: Measuring systems. |
BS EN 61298-3:2008 | Process measurement and control devices. General methods and procedures for evaluating performance Tests for the effects of influence quantities |
I.S. EN 50563:2011 | EXTERNAL A.C. - D.C. AND A.C. - A.C. POWER SUPPLIES - DETERMINATION OF NO-LOAD POWER AND AVERAGE EFFICIENCY OF ACTIVE MODES |
I.S. EN 60770-1:2011 | TRANSMITTERS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 1: METHODS FOR PERFORMANCE EVALUATION |
BS EN 50470-1 : 2006 | ELECTRICITY METERING EQUIPMENT (A.C.) - PART 1: GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - METERING EQUIPMENT (CLASS INDEXES A, B AND C) |
CEI EN 61315 : 2007 | CALIBRATION OF FIBRE-OPTIC POWER METERS |
I.S. EN 62056-42:2002 | ELECTRICITY METERING - DATA EXCHANGE FOR METER READING, TARIFF AND LOAD CONTROL - PART 42: PHYSICAL LAYER SERVICES AND PROCEDURES FOR CONNECTION-ORIENTED ASYNCHRONOUS DATA EXCHANGE |
CEI EN 62056-4-7 : 1ED 2017 | ELECTRICITY METERING DATA EXCHANGE - THE DLMS/COSEM SUITE - PART 4-7: DLMS/COSEM TRANSPORT LAYER FOR IP NETWORKS |
CSA CEI/IEC 61000.4.30 : 2004 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-30: TESTING AND MEASUREMENT TECHNIQUES - POWER QUALITY MEASUREMENT METHODS |
IEC 62387-1:2007 | Radiation protection instrumentation - Passive integrating dosimetry systems for environmental and personal monitoring - Part 1: General characteristics and performance requirements |
CAN/CSA-C22.2 NO. 60896-22:17 | Stationary lead-acid batteries — Part 22: Valve regulated types - Requirements (Adopted IEC 60896-22:2004, first edition, 2004-02, with Canadian deviations) | Batteries stationnaires au plomb - Partie 22 : Types étanches à soupapes - Exigences (norme IEC 60896-22:2004 adoptée, première édition, 2004-02, avec exigences propres au Canada) |
CEI EN 61557-12 : 2013 | ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 12: PERFORMANCE MEASURING AND MONITORING DEVICES (PMD) |
CEI EN 62056-9-7 : 2014 | ELECTRICITY METERING DATA EXCHANGE - THE DLMS/COSEM SUITE - PART 9-7: COMMUNICATION PROFILE FOR TCP-UDP/IP NETWORKS |
ISO/TS 81346-3:2012 | Industrial systems, installations and equipment and industrial products Structuring principles and reference designations Part 3: Application rules for a reference designation system |
I.S. EN 61000-4-4:2012 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-4: TESTING AND MEASUREMENT TECHNIQUES - ELECTRICAL FAST TRANSIENT/BURST IMMUNITY TEST (IEC 61000-4-4:2012 (EQV)) |
IEC 61066:2006 | Thermoluminescence dosimetry systems for personal and environmental monitoring |
IEC 60050-112:2010 | International Electrotechnical Vocabulary (IEV) - Part 112: Quantities and units |
CISPR TR 16-4-1:2009 | Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-1: Uncertainties, statistics and limit modelling - Uncertainties in standardized EMC tests |
I.S. EN 62301:2005 | HOUSEHOLD ELECTRICAL APPLIANCES - MEASUREMENT OF STANDBY POWER |
IEC 62055-52:2008 | Electricity metering - Payment systems - Part 52: Standard transfer specification (STS) - Physical layer protocol for a two-way virtual token carrier for direct local connection |
IEC 61298-1:2008 | Process measurement and control devices - General methods and procedures for evaluating performance - Part 1: General considerations |
IEC 62052-21:2004+AMD1:2016 CSV | Electricity metering equipment (a.c.) - General requirements, tests and test conditions - Part 21: Tariff and load control equipment |
IEC 61987-1:2006 | Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 1: Measuring equipment with analogue and digital output |
IEC 62055-31:2005 | Electricity metering - Payment systems - Part 31: Particular requirements - Static payment meters for active energy (classes 1 and 2) |
IEC 62056-46:2002+AMD1:2006 CSV | Electricity metering - Data exchange for meter reading, tariff and load control - Part 46: Data link layer using HDLC protocol |
IEC 62052-11:2003+AMD1:2016 CSV | Electricity metering equipment (a.c.) - General requirements, tests and test conditions - Part 11: Metering equipment |
IEC 61000-4-30 : 3.0EN+(REDLINE+VERSION) | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-30: TESTING AND MEASUREMENT TECHNIQUES - POWER QUALITY MEASUREMENT METHODS |
IEC 60896-22:2004 | Stationary lead-acid batteries - Part 22: Valve regulated types - Requirements |
IEC 62703:2013 | Expression of performance of fluorometric oxygen analyzers in liquid media |
IEC TR 62461:2015 | Radiation protection instrumentation - Determination of uncertainty in measurement |
IEC 62056-62:2006 | Electricity metering - Data exchange for meter reading, tariff and load control - Part 62: Interface classes |
IEC 62056-47:2006 | Electricity metering - Data exchange for meter reading, tariff and load control - Part 47: COSEM transport layers for IPv4 networks |
IEC 62056-9-7:2013 | Electricity metering data exchange - The DLMS/COSEM suite - Part 9-7: Communication profile for TCP-UDP/IP networks |
IEC 62056-42:2002 | Electricity metering - Data exchange for meter reading, tariff and load control - Part 42: Physical layer services and procedures for connection-oriented asynchronous data exchange |
IEC 60688:2012 | Electrical measuring transducers for converting A.C. and D.C. electrical quantities to analogue or digital signals |
IEC 61298-2:2008 | Process measurement and control devices - General methods and procedures for evaluating performance - Part 2: Tests under reference conditions |
IEC 60770-1:2010 | Transmitters for use in industrial-process control systems - Part 1: Methods for performance evaluation |
IEC 62475:2010 | High-current test techniques - Definitions and requirements for test currents and measuring systems |
IEC 61207-1:2010 | Expression of performance of gas analyzers - Part 1: General |
IEC 61298-3:2008 | Process measurement and control devices - General methods and procedures for evaluating performance - Part 3: Tests for the effects of influence quantities |
ISO 18113-1:2009 | In vitro diagnostic medical devices — Information supplied by the manufacturer (labelling) — Part 1: Terms, definitions and general requirements |
IEC 61000-4-30:2015 RLV | Electromagnetic compatibility (EMC) - Part 4-30: Testing and measurement techniques - Power quality measurement methods |
IEC 61315:2005 | Calibration of fibre-optic power meters |
IEC 61968-8:2015 | Application integration at electric utilities - System interfaces for distribution management - Part 8: Interfaces for customer operations |
IEC 62056-61:2006 | Electricity metering - Data exchange for meter reading, tariff and load control - Part 61: Object identification system (OBIS) |
IEC 62056-21:2002 | Electricity metering - Data exchange for meter reading, tariff and load control - Part 21: Direct local data exchange |
IEC 60896-21:2004 | Stationary lead-acid batteries - Part 21: Valve regulated types - Methods of test |
IEC 62129-2:2011 | Calibration of wavelength/optical frequency measurement instruments - Part 2: Michelson interferometer single wavelength meters |
IEC 60770-2:2010 | Transmitters for use in industrial-process control systems - Part 2: Methods for inspection and routine testing |
IEC 61557-1:2007 | Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 1: General requirements |
UNE-EN 60688:2013 | Electrical measuring transducers for converting A.C. and D.C. electrical quantities to analogue or digital signals |
EN 60051-1:2017 | Direct acting indicating analogue electrical measuring instruments and their accessories - Part 1: Definitions and general requirements common to all parts |
EN ISO 18113-1:2011 | In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 1: Terms, definitions and general requirements (ISO 18113-1:2009) |
UNE-EN 50564:2012 | Electrical and electronic household and office equipment - Measurement of low power consumption |
NF EN 62052-21 : 2006 | ELECTRICITY METERING EQUIPMENT (A.C.) - GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - PART 21: TARIFF AND LOAD CONTROL EQUIPMENT |
BIS IS/IEC 62056-46 : 2007 | ELECTRICITY METERING - DATA EXCHANGE FOR METER READING, TARIFF AND LOAD CONTROL - PART 46: DATA LINK LAYER USING HDLC PROTOCOL |
BS EN 60770-2:2010 | Transmitters for use in industrial-process control systems Methods for inspection and routine testing |
BS EN 62056-42:2002 | Electricity metering. Data exchange for meter reading, tariff and load control Physical layer services and procedures for connection-oriented asynchronous data exchange |
DIN ISO/TS 81346-3;DIN SPEC 1330:2013-09 | INDUSTRIAL SYSTEMS, INSTALLATIONS AND EQUIPMENT AND INDUSTRIAL PRODUCTS - STRUCTURING PRINCIPLES AND REFERENCE DESIGNATIONS - PART 3: APPLICATION RULES FOR A REFERENCE DESIGNATION SYSTEM (ISO/TS 81346-3:2012) |
BS EN 61315:2006 | Calibration of fibre-optic power meters |
14/30301422 DC : 0 | BS EN 62056-4-7 - ELECTRICITY METERING DATA EXCHANGE - THE DLMS/COSEM SUITE - PART 4-7: DLMS/COSEM TRANSPORT LAYER FOR IP NETWORKS |
CEI EN 61000-4-4 : 2013 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-4: TESTING AND MEASUREMENT TECHNIQUES - ELECTRICAL FAST TRANSIENT/BURST IMMUNITY TEST |
CEI EN 61968-100 : 2014 | APPLICATION INTEGRATION AT ELECTRIC UTILITIES - SYSTEM INTERFACES FOR DISTRIBUTION MANAGEMENT - PART 100: IMPLEMENTATION PROFILES |
BS EN 61557-12:2008 | Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Equipment for testing, measuring or monitoring of protective measures Performance measuring and monitoring devices (PMD) |
BS EN 62056-7-5:2016 | Electricity metering data exchange. The DLMS/COSEM suite Local data transmission profiles for Local Networks (LN) |
DIN EN ISO 18113-1:2013-01 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - INFORMATION SUPPLIED BY THE MANUFACTURER (LABELLING) - PART 1: TERMS, DEFINITIONS AND GENERAL REQUIREMENTS (ISO 18113-1:2009) |
BS EN ISO 18113-1:2011 | In vitro diagnostic medical devices. Information supplied by the manufacturer (labelling) Terms, definitions and general requirements |
CEI EN 61968-9 : 2014 | APPLICATION INTEGRATION AT ELECTRIC UTILITIES - SYSTEM INTERFACES FOR DISTRIBUTION MANAGEMENT - PART 9: INTERFACES FOR METER READING AND CONTROL |
BS EN 62703:2013 | Expression of performance of fluorometric oxygen analyzers in liquid media |
BS EN 50564:2011 | Electrical and electronic household and office equipment. Measurement of low power consumption |
10/30239384 DC : 0 | BS EN ISO/IEC 62056-6-1 - ELECTRICITY METERING DATA EXCHANGE - THE DLMS/COSEM SUITE - PART 6-1: COSEM OBJECT IDENTIFICATION SYSTEM (OBIS) |
BS EN 62419:2009 | Control technology. Rules for the designation of measuring instruments |
UNE-IEC 60050-447:2011 | International Electrotechnical Vocabulary (IEV) - Part 447: Measuring relays |
11/30244464 DC : 0 | BS EN 50563 - EXTERNAL A.C. - D.C. AND A.C. - A.C. POWER SUPPLIES - DETERMINATION OF NO-LOAD POWER AND AVERAGE EFFICIENCY OF ACTIVE MODES |
05/30141113 DC : 0 | EN 50463 - RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS |
PD CISPR/TR 16-4-1:2009 | Specification for radio disturbance and immunity measuring apparatus and methods Uncertainties, statistics and limit modelling. Uncertainties in standardized EMC tests |
11/30175582 DC : 0 | BS EN 60050-395 - INTERNATIONAL ELECTROTECHNICAL VOCABULARY - PART 395: NUCLEAR INSTRUMENTATION - PHYSICAL PHENOMENA, BASIC CONCEPTS, INSTRUMENTS, SYSTEMS, EQUIPMENT AND DETECTORS |
BS EN 62056-62:2007 | Electricity metering. Data exchange for meter reading, tariff and load control Interface classes |
BS EN 60051-1:2017 | Direct acting indicating analogue electrical measuring instruments and their accessories Definitions and general requirements common to all parts |
BS EN 61557-1:2007 | Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Equipment for testing, measuring or monitoring of protective measures General requirements |
BS EN 60068-2-64:1995 | Environmental testing. Test methods Test Fh. Vibration, broad-band random (digital control) and guidance |
CSA C62301:2011 | HOUSEHOLD ELECTRICAL APPLIANCES - MEASUREMENT OF STANDBY POWER |
BS EN 62055-31:2005 | Electricity metering. Payment systems Particular requirements. Static payment meters for active energy (classes 1 and 2) |
BS EN 60896-22:2004 | Stationary lead-acid batteries Valve regulated types. Requirements |
I.S. EN 62522:2014 | CALIBRATION OF TUNEABLE LASER SOURCES |
CEI EN 62052-11 : 2003 | ELECTRICITY METERING EQUIPMENT (AC) - GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - PART 11: METERING EQUIPMENT |
CSA C393 : 2012 : INC : UPD 1 : 2014 | TEST METHODS FOR MEASURING POWER CONSUMPTION IN LOW AND IDLE POWER MODES OF COMMERCIAL AND INDUSTRIAL EQUIPMENT |
I.S. EN 60068-2-55:2013 | ENVIRONMENTAL TESTING - PART 2-55: TESTS - TEST EE AND GUIDANCE - LOOSE CARGO TESTING INCLUDING BOUNCE (IEC 60068-2-55:2013 (EQV)) |
UNE-EN 62475:2012 | High-current test techniques - Definitions and requirements for test currents and measuring systems |
I.S. EN 62475:2010 | HIGH-CURRENT TEST TECHNIQUES - DEFINITIONS AND REQUIREMENTS FOR TEST CURRENTS AND MEASURING SYSTEMS |
I.S. EN 62056-7-5:2016 | ELECTRICITY METERING DATA EXCHANGE - THE DLMS/COSEM SUITE - PART 7-5: LOCAL DATA TRANSMISSION PROFILES FOR LOCAL NETWORKS (LN) |
CSA C61000-4-30 : 2010 : R2014 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-30: TESTING AND MEASUREMENT TECHNIQUES - POWER QUALITY MEASUREMENT METHODS |
CAN/CSA-C381.1-17 | Energy performance of external ac-dc and ac-ac power supplies |
I.S. EN 60896-21:2004 | STATIONARY LEAD-ACID BATTERIES - PART 21: VALVE REGULATED TYPES - METHODS OF TEST |
I.S. EN 62703:2013 | EXPRESSION OF PERFORMANCE OF FLUOROMETRIC OXYGEN ANALYZERS IN LIQUID MEDIA (IEC 62703:2013 (EQV)) |
I.S. EN 62056-47:2007 | ELECTRICITY METERING - DATA EXCHANGE FOR METER READING, TARIFF AND LOAD CONTROL - PART 47: COSEM TRANSPORT LAYERS FOR IPV4 NETWORKS |
I.S. EN 60770-2:2010 | TRANSMITTERS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 2: METHODS FOR INSPECTION AND ROUTINE TESTING |
EN 50470-1:2006 | Electricity metering equipment (a.c.) - Part 1: General requirements, tests and test conditions - Metering equipment (class indexes A, B and C) |
I.S. EN 61298-3:2008 | PROCESS MEASUREMENT AND CONTROL DEVICES - GENERAL METHODS AND PROCEDURES FOR EVALUATING PERFORMANCE - PART 3: TESTS FOR THE EFFECTS OF INFLUENCE QUANTITIES |
IEEE 802.15.7-2011 | IEEE Standard for Local and Metropolitan Area Networks--Part 15.7: Short-Range Wireless Optical Communication Using Visible Light |
I.S. EN 61298-4:2008 | PROCESS MEASUREMENT AND CONTROL DEVICES - GENERAL METHODS AND PROCEDURES FOR EVALUATING PERFORMANCE - PART 4: EVALUATION REPORT CONTENT |
I.S. EN 60359:2002 | ELECTRICAL AND ELECTRONIC MEASUREMENT EQUIPMENT - EXPRESSION OF PERFORMANCE |
ISO 13584-501:2007 | Industrial automation systems and integration — Parts library — Part 501: Reference dictionary for measuring instruments — Registration procedure |
CEI EN 50564 : 2013 | ELECTRICAL AND ELECTRONIC HOUSEHOLD AND OFFICE EQUIPMENT - MEASUREMENT OF LOW POWER CONSUMPTION |
BS PD CISPR/TR 16-4-5 : 2006 | SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 4-5: UNCERTAINTIES, STATISTICS AND LIMIT MODELLING - CONDITIONS FOR THE USE OF ALTERNATIVE TEST METHODS |
BS PD CISPR/TR 16-3 : 2010 | SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 3: CISPR TECHNICAL REPORTS |
ISO/IEC 19796-3:2009 | Information technology — Learning, education and training — Quality management, assurance and metrics — Part 3: Reference methods and metrics |
I.S. EN 60688:2013 | ELECTRICAL MEASURING TRANSDUCERS FOR CONVERTING A.C. AND D.C. ELECTRICAL QUANTITIES TO ANALOGUE OR DIGITAL SIGNALS (IEC 60688:2012 (EQV)) |
NF EN 50463 : 2008 | RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS |
CSA IEC 61000-4-4 : 2016 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-4: TESTING AND MEASUREMENT TECHNIQUES - ELECTRICAL FAST TRANSIENT/BURST IMMUNITY TEST |
UNI EN ISO 18113-1 : 2012 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - INFORMATION SUPPLIED BY THE MANUFACTURER (LABELLING) - PART 1: TERMS, DEFINITIONS AND GENERAL REQUIREMENTS |
ASTM E 3064 : 2016 | Standard Test Method for Evaluating the Performance of Optical Tracking Systems that Measure Six Degrees of Freedom (6DOF) Pose |
CEI EN 60060-2 : 2015 | HIGH-VOLTAGE TEST TECHNIQUES - PART 2: MEASURING SYSTEMS |
NF EN 62056-4-7 : 2017 | ENERGY MANAGEMENT SYSTEM APPLICATION PROGRAM INTERFACE (EMS-API) - PART 552: CIMXML MODEL EXCHANGE FORMAT |
IEC 60050-447:2010 | International Electrotechnical Vocabulary (IEV) - Part 447: Measuring relays |
IEC TR 62055-21:2005 | Electricity metering - Payment systems - Part 21: Framework for standardization |
I.S. EN 60896-22:2004 | STATIONARY LEAD-ACID BATTERIES - PART 22: VALVE REGULATED TYPES - REQUIREMENTS |
IEC 62282-3-2:2006 | Fuel cell technologies - Part 3-2: Stationary fuel cell power systems - Performance test methods |
IEC 60068-2-55:2013 | Environmental testing - Part 2-55: Tests - Test Ee and guidance - Loose cargo testing including bounce |
IEC 62053-52:2005 | Electricity metering equipment (AC) - Particular requirements - Part 52: Symbols |
EN 62282-3-2:2006 | Fuel cell technologies - Part 3-2: Stationary fuel cell power systems - Performance test methods |
EN 61298-4:2008 | Process measurement and control devices - General methods and procedures for evaluating performance - Part 4: Evaluation report content |
EN 62703:2013 | Expression of performance of fluorometric oxygen analyzers in liquid media |
EN 60770-2:2010 | Transmitters for use in industrial-process control systems - Part 2: Methods for inspection and routine testing |
EN 62056-47:2007 | Electricity metering - Data exchange for meter reading, tariff and load control - Part 47: COSEM transport layers for IPv4 networks |
EN 61987-1:2007 | Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 1: Measuring equipment with analogue and digital output |
EN 62056-21:2002 | Electricity metering - Data exchange for meter reading, tariff and load control - Part 21: Direct local data exchange |
EN 61557-12:2008 | Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 12: Performance measuring and monitoring devices (PMD) |
EN 62056-61:2007 | Electricity metering - Data exchange for meter reading, tariff and load control - Part 61: Object identification system (OBIS) |
EN 61000-4-4:2012 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-4: TESTING AND MEASUREMENT TECHNIQUES - ELECTRICAL FAST TRANSIENT/BURST IMMUNITY TEST (IEC 61000-4-4:2012) |
EN 62056-7-5:2016 | Electricity metering data exchange - The DLMS/COSEM suite - Part 7-5: Local data transmission profiles for Local Networks (LN) |
EN 50563:2011/A1:2013 | EXTERNAL A.C. - D.C. AND A.C. - A.C. POWER SUPPLIES - DETERMINATION OF NO-LOAD POWER AND AVERAGE EFFICIENCY OF ACTIVE MODES |
EN 62301:2005 | Household electrical appliances - Measurement of standby power |
EN 62052-21:2004/A1:2017/AC:2018-04 | ELECTRICITY METERING EQUIPMENT (AC) - GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - PART 21: TARIFF AND LOAD CONTROL EQUIPMENT (IEC 62052-21:2004/A1:2016/COR1:2018) |
EN 60068-2-55:2013 | Environmental testing - Part 2-55: Tests - Test Ee and guidance - Loose cargo testing including bounce |
EN 60068-2-80:2005 | Environmental testing - Part 2-80: Tests - Test Fi: Vibration - Mixed mode |
EN 62053-52:2005 | Electricity metering equipment (AC) - Particular requirements - Part 52: Symbols |
EN 61298-2:2008 | PROCESS MEASUREMENT AND CONTROL DEVICES - GENERAL METHODS AND PROCEDURES FOR EVALUATING PERFORMANCE - PART 2: TESTS UNDER REFERENCE CONDITIONS |
EN 61000-4-12:2017 | Electromagnetic compatibility (EMC) - Part 4-12: Testing and measurement techniques - Ring wave immunity test |
EN 62522:2014 | Calibration of tuneable laser sources |
EN 61968-100:2013 | Application integration at electric utilities - System interfaces for distribution management - Part 100: Implementation profiles |
EN 61557-1:2007 | Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 1: General requirements |
EN 50463:2007 | Railway applications - Energy measurement on board trains |
EN 61003-1:2016 | Industrial-process control systems - Instruments with analogue inputs and two- or multi-position outputs - Part 1: Methods for evaluating performance |
EN 60068-2-64:2008 | ENVIRONMENTAL TESTING - PART 2-64: TESTS - TEST FH: VIBRATION, BROADBAND RANDOM AND GUIDANCE |
EN 61315:2006 | Calibration of fibre-optic power meters |
EN 60896-21:2004 | Stationary lead-acid batteries - Part 21: Valve regulated types - Methods of test |
IEC 60050-702:1992 | International Electrotechnical Vocabulary (IEV) - Part 702: Oscillations, signals and related devices |
AS IEC 62475:2019 | High-current test techniques - Definitions and requirements for test currents and measuring systems |
IEC 60050-551:1998 | International Electrotechnical Vocabulary (IEV) - Part 551: Power electronics |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.