NEN EN 10301 : 2003

Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Coating material
   4.1 General
   4.2 Qualification of coating materials
        4.2.1 General
        4.2.2 Non-volatile matter (by mass)
        4.2.3 Viscosity at (23 +/- 2) degree C
        4.2.4 Density
        4.2.5 Ash content
        4.2.6 Pot-life
        4.2.7 Appearance
        4.2.8 Dry film thickness
        4.2.9 Adhesion test - Cross-cut test
        4.2.10 Buchholz hardness
        4.2.11 Resistance to neutral salt spray
        4.2.12 Ageing test
        4.2.13 Bend test - Conical mandrel
        4.2.14 Resistance to gas pressure variation
        4.2.15 Resistance to hydraulic blistering
        4.2.16 Resistance to water immersion
        4.2.17 Chemical resistance
        4.2.18 Infrared analysis
   4.3 Technical documentation
   4.4 Packaging
5 Information to be supplied by the purchaser
6 Application of the coating
   6.1 Surface preparation
   6.2 Composition of the coating
        6.2.1 Coating material preparation
        6.2.2 General requirements for coating material
               application
7 Requirements of the applied coating
   7.1 General
   7.2 Appearance
   7.3 Dry film thickness
   7.4 Curing test
   7.5 Porosity test
8 Inspection
   8.1 General
   8.2 Documents
   8.3 Sampling
   8.4 Nature and frequency of testing and control
   8.5 Retests
9 Repairs
10 Marking
11 Handling, transportation and storage
   11.1 Handling
   11.2 Transportation to the storage area
   11.3 Storage
   11.4 Loading of tubes for delivery
Annex A (normative) Ash content
   A.1 General
   A.2 Apparatus
   A.3 Procedure
   A.4 Results
Annex B (normative) Dry film thickness
   B.1 General
   B.2 Apparatus
   B.3 Procedure
   B.4 Results
Annex C (normative) Resistance to gas pressure
        variations
   C.1 General
   C.2 Apparatus
   C.3 Procedure
        C.3.1 Cyclic pressure test
        C.3.2 Decompression blistering test
   C.4 Results
Annex D (normative) Resistance to hydraulic blistering
   D.1 General
   D.2 Apparatus
   D.3 Procedure
   D.4 Results
Annex E (normative) Porosity of the film on glass
        panels
   E.1 General
   E.2 Apparatus
   E.3 Procedure
        E.3.1 Sample preparation
        E.3.2 Wet film porosity
        E.3.3 Dry film porosity
   E.4 Results
Annex F (normative) Wet sponge test
   F.1 General
   F.2 Apparatus
   F.3 Procedure
   F.4 Results
Bibliography