ONORM EN 12201-1 : 2015

Name: ONORM EN 12201-1 : 2015
Brand: ON

Superseded

View Superseded by

PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, AND FOR DRAINAGE AND SEWERAGE UNDER PRESSURE - POLYETHYLENE (PE) - PART 1: GENERAL

Superseded date

25-07-2023

Published date

12-01-2013

Publisher

Osterreichisches Normungsinstitut/Austrian Standards

In dieser ÖNORM werden allgemeine Anforderungen an Rohrleitungssysteme (Haupt- und Anschlussleitungen) aus Polyethylen (PE) festgelegt, die für die Versorgung mit Wasser für den menschlichen Gebrauch sowie für die Fortleitung von Rohwasser, das zur Aufbereitung zu Trinkwasser verwendet wird, eingesetzt werden. Weiters werden auch die Prüfparameter für die Prüfverfahren festgelegt, auf die in dieser Norm verwiesen wird. Zusammen mit den übrigen Teilen der EN 12201 gilt dieser Teil für Rohre, Formstücke und Armaturen aus PE, deren Verbindungen untereinander und mit Rohrleitungsteilen aus anderen Werkstoffen, die zur Verwendung unter den folgenden Bedingungen vorgesehen sind: a) der maximal zulässige Betriebsdruck MOP beträgt nicht mehr als 25 bar (1 bar = 105 N/m2); b) es gilt eine Betriebstemperatur von 20 grad C als Bezugstemperatur.

Committee	TC 005
DevelopmentNote	Supersedes ONORM B 5170 and ONORM B 5172. (01/2005) Supersedes ONORM EN 13244-1. (03/2012)
DocumentType	Standard
PublisherName	Osterreichisches Normungsinstitut/Austrian Standards
Status	Superseded
SupersededBy	ÖNORM EN 12201-1:2023 07 15

Standards	Relationship
DIN EN 12201-1:2011-11	Identical
SN EN 12201-1:2011	Identical
BS EN 12201-1:2011	Identical
NBN EN 12201-1 : 2011	Identical
UNI EN 12201-1 : 2012	Identical
NF EN 12201-1 : 2011	Identical
NEN EN 12201-1 : 2011	Identical
I.S. EN 12201-1:2011	Identical
EN 12201-1:2011	Identical
UNE-EN 12201-1:2012	Identical
NS EN 12201-1 : 2011	Identical

ONORM EN 12201-3 : 2013	PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, AND FOR DRAINAGE AND SEWERAGE UNDER PRESSURE - POLYETHYLENE (PE) - PART 3: FITTINGS
ONORM EN 12201-4 : 2012	PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, AND FOR DRAINAGE AND SEWERAGE UNDER PRESSURE - POLYETHYLENE (PE) - PART 4: VALVES
ONORM EN 12201-2 : 2013	PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, AND FOR DRAINAGE AND SEWERAGE UNDER PRESSURE - POLYETHYLENE (PE) - PART 2: PIPES

ONORM EN ISO 1043-1 : 2012 AMD 1 2016	PLASTICS - SYMBOLS AND ABBREVIATED TERMS - PART 1: BASIC POLYMERS AND THEIR SPECIAL CHARACTERISTICS (ISO 1043-1:2011)
ONORM EN ISO 1183-2 : 2004	PLASTICS - METHODS FOR DETERMINING THE DENSITY OF NON-CELLULAR PLASTICS - PART 2: DENSITY GRADIENT COLUMN METHOD
ISO 13953:2001	Polyethylene (PE) pipes and fittings — Determination of the tensile strength and failure mode of test pieces from a butt-fused joint
ISO 1167-2:2006	Thermoplastics pipes, fittings and assemblies for the conveyance of fluids — Determination of the resistance to internal pressure — Part 2: Preparation of pipe test pieces
ISO 1133-1:2011	Plastics Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics Part 1: Standard method
ONORM EN 12201-2 : 2013	PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, AND FOR DRAINAGE AND SEWERAGE UNDER PRESSURE - POLYETHYLENE (PE) - PART 2: PIPES
ISO 6964:1986	Polyolefin pipes and fittings Determination of carbon black content by calcination and pyrolysis Test method and basic specification
ONORM EN ISO 12162 : 2010	THERMOPLASTICS MATERIALS FOR PIPES AND FITTINGS FOR PRESSURE APPLICATIONS - CLASSIFICATION, DESIGNATION AND DESIGN COEFFICIENT
ISO 9080:2012	Plastics piping and ducting systems — Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation
ISO 13477:2008	Thermoplastics pipes for the conveyance of fluids — Determination of resistance to rapid crack propagation (RCP) — Small-scale steady-state test (S4 test)
ISO 18553:2002	Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds
ISO 13479:2009	Polyolefin pipes for the conveyance of fluids Determination of resistance to crack propagation Test method for slow crack growth on notched pipes
ISO 12162:2009	Thermoplastics materials for pipes and fittings for pressure applications Classification, designation and design coefficient
ISO 6259-1:2015	Thermoplastics pipes Determination of tensile properties Part 1: General test method
ISO 13478:2007	Thermoplastics pipes for the conveyance of fluids — Determination of resistance to rapid crack propagation (RCP) — Full-scale test (FST)
ISO 16871:2003	Plastics piping and ducting systems — Plastics pipes and fittings — Method for exposure to direct (natural) weathering
ONORM EN ISO 1183-1 : 2013	PLASTICS - METHODS FOR DETERMINING THE DENSITY OF NON-CELLULAR PLASTICS - PART 1: IMMERSION METHOD, LIQUID PYKNOMETER METHOD AND TITRATION METHOD (ISO 1183-1:2012)
ISO 472:2013	Plastics Vocabulary
ONORM EN ISO 472 : 2013	PLASTICS - VOCABULARY (ISO 472:2013)
ISO 13954:1997	Plastics pipes and fittings Peel decohesion test for polyethylene (PE) electrofusion assemblies of nominal outside diameter greater than or equal to 90 mm
ISO 1183-1:2012	Plastics Methods for determining the density of non-cellular plastics Part 1: Immersion method, liquid pyknometer method and titration method
ISO 1183-2:2004	Plastics Methods for determining the density of non-cellular plastics Part 2: Density gradient column method
ISO 15512:2016	Plastics Determination of water content
ISO 11357-6:2008	Plastics Differential scanning calorimetry (DSC) Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
ONORM EN ISO 13479 : 2010	POLYOLEFIN PIPES FOR THE CONVEYANCE OF FLUIDS - DETERMINATION OF RESISTANCE TO CRACK PROPAGATION - TEST METHOD FOR SLOW CRACK GROWTH ON NOTCHED PIPES
ONORM EN 12201-3 : 2013	PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, AND FOR DRAINAGE AND SEWERAGE UNDER PRESSURE - POLYETHYLENE (PE) - PART 3: FITTINGS
ONORM EN ISO 1133-1 : 2012	PLASTICS - DETERMINATION OF THE MELT MASS-FLOW RATE (MFR) AND MELT VOLUME-FLOW RATE (MVR) OF THERMOPLASTICS - PART 1: STANDARD METHOD (ISO 1133-1:2011)
ISO 1133-2:2011	Plastics Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics Part 2: Method for materials sensitive to time-temperature history and/or moisture
ONORM EN 12201-4 : 2012	PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, AND FOR DRAINAGE AND SEWERAGE UNDER PRESSURE - POLYETHYLENE (PE) - PART 4: VALVES
ISO 1043-1:2011	Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special characteristics
ONORM EN ISO 15512 : 2017	PLASTICS - DETERMINATION OF WATER CONTENT (ISO 15512:2016)
ISO 1167-1:2006	Thermoplastics pipes, fittings and assemblies for the conveyance of fluids Determination of the resistance to internal pressure Part 1: General method