TR 102 273-5 : 1.2.1

Intellectual Property Rights
Foreword
1 Scope
2 References
3 Definitions, symbols and abbreviations
  3.1 Definitions
  3.2 Symbols
  3.3 Abbreviations
4 Introduction
  4.1 Open two-plate Stripline test cells
  4.2 Open three-plate Stripline test cells
  4.3 Closed Stripline cell
5 Uncertainty contributions specific to Stripline test
  facilities
  5.1 Mutual coupling
  5.2 Characteristic impedance of the Stripline
  5.3 Non-planar nature of the field distribution
  5.4 Field strength measurement
  5.5 Correction factor for the size of the EUT
  5.6 Influence of site effects
  5.7 General discussion
6 Verification procedure for a Stripline
  6.1 Definition
  6.2 Overview of the verification procedure
      6.2.1 Apparatus required
      6.2.2 Site preparation
      6.2.3 Measurement configuration
      6.2.4 What to record
  6.3 Verification procedure
  6.4 Processing the results of the verification procedure
      6.4.1 Introduction
      6.4.2 Completing the results sheet
  6.5 Report Format
  6.6 Calculation of measurement uncertainty
      6.6.1 Uncertainty contribution: Stage 1: Reference,
            direct attenuation measurement
      6.6.2 Uncertainty contribution: Stage 2: Stripline
            attenuation measurement
      6.6.3 Expanded uncertainty of the verification
            procedure
7 Test methods
  7.1 Introduction
      7.1.1 Site preparation
      7.1.2 Preparation of the EUT
      7.1.3 Power supplies to the EUT
  7.2 Transmitter tests
      7.2.1 Frequency error
      7.2.2 Effective radiated power
      7.2.3 Spurious emissions
      7.2.4 Adjacent channel power
  7.3 Receiver tests
      7.3.1 Sensitivity tests (30 MHz to 1 000 MHz)
            7.3.1.1 Apparatus required
            7.3.1.2 Method of measurement
            7.3.1.3 Procedure for the completion of the
                    results sheets
            7.3.1.4 Log book entries
            7.3.1.5 Statement of results
      7.3.2 Measurement uncertainty for Receiver sensitivity
            7.3.2.1 Uncertainty contributions: Stage 1:
                    EUT measurement
            7.3.2.2 Uncertainty contributions: Stage 2:
                    Field measurement
            7.3.2.3 Expanded uncertainty for the Receiver
                    sensitivity measurement
      7.3.3 Co-channel rejection
      7.3.4 Adjacent channel selectivity
      7.3.5 Intermodulation immunity
      7.3.6 Blocking immunity or desensitization
      7.3.7 Spurious response rejection
Annex A: Bibliography
History