Plastics piping systems. Multilayer pipe systems for indoor gas installations with a maximum operating pressure up to and including 5 bar (500 kPa). Part 1: Specifications for pipes, fittings and the system

Available format(s)

Hardcopy , PDF

Language(s)

Spanish, Castilian

Published date

10-09-2014

Publisher

Asociacion Espanola de Normalizacion

Committee	CTN 53/SC 2
DocumentType	Standard
Pages	45
PublisherName	Asociacion Espanola de Normalizacion
Status	Current

UNE 53008-2:2016

Plastics piping systems. Multilayer pipe systems for gas installations pipework with a maximum operating pressure up to and including 5 bar (500 kPa). Part 2: Design, installation and maintenance

ISO 17484-2:2009	Plastics piping systems Multilayer pipe systems for indoor gas installations Part 2: Code of pratice
ISO 17484-1:2014	Plastics piping systems Multilayer pipe systems for indoor gas installations with a maximum operating pressure up to and including 5 bar (500 kPa) Part 1: Specifications for systems
UNE-EN 437:2003	Test gases - Test pressures - Appliance categories
UNE-EN ISO 1167-1:2006	Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 1: General method (ISO 1167-1:2006)
UNE-EN ISO 3126:2005	Plastics piping systems - Plastics components - Determination of dimensions (ISO 3126:2005)
UNE-EN ISO 228-1:2003	Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000)
ISO 10838-3:2001	Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels Part 3: Thermoplastics fittings for pipes of nominal outside diameter less than or equal to 63 mm
UNE-ISO 17454:2007	Plastics piping systems. Multilayer pipes. Test method for the adhesion of the different layers using a pulling rig. (ISO 17454:2006)
UNE-EN 12165:2017	Copper and copper alloys - Wrought and unwrought forging stock
ISO 10838-1:2000	Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels Part 1: Metal fittings for pipes of nominal outside diameter less than or equal to 63 mm
UNE-EN 10088-1:2015	Stainless steels - Part 1: List of stainless steels
UNE-EN ISO 11357-6:2013	Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) (ISO 11357-6:2008)
ISO 18553:2002	Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds
UNE-EN ISO 9080:2013	Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation (ISO 9080:2012)
UNE-EN 10226-1:2004	Pipe threads where pressure tight joints are made on the threads. Part 1: Taper external threads and parellel internal threads. Dimensions, tolerances and designation.
UNE-EN 1982:2009	Copper and copper alloys - Ingots and castings
UNE-EN 682:2002	Elastomeric Seals - Materials requirements for seals used in pipes and fittings carrying gas and hydrocarbon fluids.
UNE-EN ISO 1167-2:2006	Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 2: Preparation of pipe test pieces (ISO 1167-2:2006)
UNE-EN 12164:2017	Copper and copper alloys - Rod for free machining purposes
PREN 1254-8 : DRAFT 2011	COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 8: FITTINGS WITH PRESS ENDS FOR USE WITH PLASTICS AND MULTILAYER PIPES
UNE-EN 549:1996	Rubber materials for seals and diaphragms for gas appliances and gas equipment
UNE-EN 12117:1998	PLASTICS PIPING SYSTEMS. FITTINGS, VALVES AND ANCILLARIES. DETERMINATION OF GASEOUS FLOW RATE/PRESSURE DROP RELATIONSHIPS.
UNE-EN 712:1994	THERMOPLASTICS PIPING SYSTEMS. END-LOAD BEARING MECHANICAL JOINTS BETWEEN PRESSURE PIPES AND FITTINGS. TEST METHOD FOR RESISTANCE TO PULL-OUT UNDER CONSTANT LONGITUDINAL FORCE.
UNE-EN 713:1994	PLASTICS PIPING SYSTEMS. MECHANICAL JOINTS BETWEEN FITTINGS AND POLYOLEFIN PRESSURE PIPES. TEST METHOD FOR LEAKTIGHTNESS UNDER INTERNAL PRESSURE OF ASSEMBLIES SUBJECTED TO BENDING.
UNE-EN 1254-4:1999	COPPER AND COPPER ALLOYS. PLUMBING FITTINGS. PART 4: FITTINGS COMBININg other end connections with capillary or compression ends.
UNE-EN 1254-3:1999	COPPER AND COPPER ALLOYS. PLUMBING FITTINGS. PART 3: FITTINGS WITH COMPRESSION ENDS FOR USE WITH PLASTIC PIPES.
UNE-EN ISO 1456:2010	Metallic and other inorganic coatings - Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and of copper plus nickel plus chromium (ISO 1456:2009)
UNE-EN 12449:2016	Copper and copper alloys - Seamless, round tubes for general purposes
UNE-ISO 5893:2012	Rubber and plastics test equipment. Tensile, flexural and compression types (constant rate of traverse). Specification.
UNE-EN 573-3:2014	Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products