• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

UNI EN 12053 : 2008

Current

Current

The latest, up-to-date edition.

SAFETY OF INDUSTRIAL TRUCKS - TEST METHODS FOR MEASURING NOISE EMISSIONS

Published date

04-12-2008

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
  3.1 A-weighted emission sound pressure level at the
      operator's position for the operational cycle
      L[p][AZ]
  3.2 A-weighted sound power level in an operational
      cycle L[WAZ]
  3.3 Forwards operation
  3.4 Industrial and rough terrain truck families
  3.5 Idling
4 Installation and equipment
  4.1 Test environment
  4.2 Equipment and condition of the truck
  4.3 Position of the truck during measurement
      4.3.1 LIFT and IDLE conditions
      4.3.2 DRIVE condition
5 Operating conditions during measurement
  5.1 General
  5.2 Load of the truck
  5.3 Operation of the truck during measurement
      5.3.1 General
      5.3.2 LIFT condition
      5.3.3 IDLE condition
      5.3.4 DRIVE condition
  5.4 Trucks equipped with a cab
      5.4.1 Cab with an air conditioning and/or
            pressurized ventilating system(s)
      5.4.2 Cab without air conditioning or
            pressurized ventilating system(s)
6 Noise determination
  6.1 Instrumentation
  6.2 Microphone positions
      6.2.1 Microphone positions for determination
            of the sound pressure levels at the
            operator's position
      6.2.2 Microphone positions for determination
            of the sound power levels
  6.3 Measurements
      6.3.1 Measurements of sound pressure levels
            at operator's position
      6.3.2 Sound power level determination
7 Measurement uncertainties
8 Information to be recorded
9 Declaration of noise emission values
Annex A (Normative) - Calculation of levels in an
        average operational cycle
      A.1 Calculation of the emission sound pressure
          level in an operational cycle
      A.2 Calculation of the sound power level for
          an operational cycle
      A.3 Time proportion factors of the operating
          conditions
Annex ZA (informative) - Relationship between this
         European Standard and the Essential Requirements
         of EU Directive 98/37/EC
Annex ZB (informative) - Relationship between this
         European Standard and the Essential Requirements
         of EU Directive 2006/42/EC

Describes methods for determining the sound pressure level at the operator's position and the sound power level of industrial and rough terrain trucks.

DocumentType
Test Method
PublisherName
Ente Nazionale Italiano di Unificazione (UNI)
Status
Current
Supersedes

EN 1551:2000 Safety of industrial trucks - Self propelled trucks over 10 000 kg capacity
ISO 4871:1996 Acoustics — Declaration and verification of noise emission values of machinery and equipment
ISO 3744:2010 Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane
EN 1726-2:2000 Safety of Industrial Trucks - Self-propelled trucks up to and including 10000 kg capacity and tractors with a drawbar pull up to and including 20000 N - Part 2: Additional requirements for trucks with elevating operator position and trucks specifically designed to travel with elevated loads
EN 1525:1997 Safety of industrial trucks - Driverless trucks and their systems
EN 1726-1:1998/A1:2003 SAFETY OF INDUSTRIAL TRUCKS - SELF-PROPELLED TRUCKS UP TO AND INCLUDING 10,000 KG CAPACITY AND INDUSTRIAL TRACTORS WITH A DRAWBAR PULL UP TO AND INCLUDING 20,000 N - PART 1: GENERAL REQUIREMENTS
EN 1757-1 : 2001 SAFETY OF INDUSTRIAL TRUCKS - PEDESTRIAN PROPELLED TRUCKS - PART 1: STACKER TRUCKS
EN 1757-2 : 2001 SAFETY OF INDUSTRIAL TRUCKS - PEDESTRIAN PROPELLED TRUCKS - PART 2: PALLET TRUCKS
EN 1459:1998+A3:2012 Safety of industrial trucks - Self-propelled variable reach trucks
EN ISO 11201:2010 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010)
EN ISO 3744:2010 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010)
ISO 5053:1987 Powered industrial trucks Terminology
EN ISO 4871:2009 Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996)
ISO 11201:2010 Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.