• There are no items in your cart

AS 1085.1-2002

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Railway track material Steel rails (Reconfirmed 2013)
Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Superseded date

03-30-2023

Published date

08-01-2002

Preview

Specifies performance requirements for as-rolled and head-hardened steel rail, covering track compatibility, service life, material integrity, connection, maintenance and handling. Asymmetric switch rails and elevated guardrails are also covered. Appendices five deemed to comply solutions for profiles, tolerances, chemical composition, mechanical properties and specify test methods for inclusions and surface finish. Guidance to purchasers, information on compliance and on residual stresses in rail is also given in appendices.

This Standard specifies requirements for as-rolled and hardened steel rails made from continuously cast blooms and profiles for asymmetric switch rails and elevated guardrails for railway purposes.NOTES: 1 Guidelines for purchasers are given in Appendix A.2 Guidance on the means for demonstrating compliance with this Standard is given in Appendix B.3 Information on residual stresses in rail is given in Appendix C.

Committee
CE-002
DocumentType
Standard
ISBN
0 7337 4619 5
Pages
37
ProductNote
PublisherName
Standards Australia
Status
Superseded
SupersededBy
Supersedes
UnderRevision

First published as AS E1-1925T.Revised and redesignated in part as AS E22-1928.Redated 1932.Redated 1935.Redated 1937.Fifth edition 1939.Sixth edition 1949.Seventh edition 1964.Revised and redesignated as AS 1085.1-1977.Second edition 1981.Third edition 1990.AS 1085.11 first published 1985.Second edition 1992.Fourth edition AS 1085.1-1995.AS 1085.1-1995 and AS 1085.11-1992 revised, amalgamated and redesignated as AS 1085.1-2000.Sixth edition 2002.Reconfirmed 2013. Originated as AS E1-1925T and AS 1085.11-1985. Previous edition AS 1085.1-2000. Sixth edition 2002.

HB 18.28-1991 Guidelines for third-party certification and accreditation - Guide 28: General rules for a model third-party certification system for products
AS 1391-2007 Metallic materials - Tensile testing at ambient temperature
AS 1399-1990 Guide to AS 1199 - Sampling procedures and tables for inspection by attributes
AS/NZS 1050.20:1994 Methods for the analysis of iron and steel Determination of magnesium content - Flame atomic absorption spectrometric method (Reconfirmed 2016)
AS 1199-1988 Sampling procedures and tables for inspection by attributes
AS/NZS 1050.2:1994 Methods for the analysis of iron and steel Determination of carbon content - Gravimetric method (Reconfirmed 2016)
HB 18.28-2005 Conformity assessment - Guidance on a third-party certification system for products
AS/NZS 1050.1:1996 Methods for the analysis of iron and steel Sampling iron and steel for chemical analysis
AS/NZS 1050.16:1994 Methods for the analysis of iron and steel Determination of sulfur content - Infrared absorption method after combustion in an induction furnace (Reconfirmed 2017)
AS 1391-1991 Methods for tensile testing of metals
AS/NZS 1050.31:1994 Methods for the analysis of iron and steel Determination of niobium content - PAR spectrophotometric method (Reconfirmed 2016)
AS/NZS 1050.21:1994 Methods for the analysis of iron and steel Determination of cobalt content - Spectrophotometric method (Reconfirmed 2016)
AS/NZS 1050.39:1994 Methods for the analysis of iron and steel Determination of chromium content - Flame atomic absorption spectrometric method (Reconfirmed 2016)
AS/NZS ISO 9004:2000 Quality management systems - Guidelines for performance improvements
AS 2706-1984 Numerical values - Rounding and interpretation of limiting values
AS/NZS 1050.26:1994 Methods for the analysis of iron and steel Silicon in iron and steel - Spectrophotometric method (Reconfirmed 2016)
AS 2205.5.1-2003 Methods for destructive testing of welds in metal Macro metallographic test for cross-section examination (Reconfirmed 2018)
AS 1817-1991 Metallic materials - Vickers hardness test
AS/NZS 1050.32:1994 Methods for the analysis of iron and steel Determination of carbon content - Infrared method (Reconfirmed 2017)
AS/NZS 1050.18:1994 Methods for the analysis of iron and steel Determination of phosphorus - Spectrophotometric method (Reconfirmed 2016)
AS/NZS 1050.38:1994 Methods for the analysis of iron and steel Determination of vanadium content - Flame atomic absorption spectrometric method (Reconfirmed 2016)
AS/NZS ISO 9001:2000 Quality management systems - Requirements
AS 1816-1990 Metallic materials - Brinell hardness test
AS/NZS 1050.24:1994 Methods for the analysis of iron and steel Determination of aluminium content - Spectrophotometric method (Reconfirmed 2016)
AS/NZS 1050.28:1994 Methods for the analysis of iron and steel Vanadium in steel - Potentiometric method (Reconfirmed 2016)
AS/NZS 1050.30:1994 Methods for the analysis of iron and steel Determination of boron content - Curcumin spectrophotometric method
AS 2706-2003 Numerical values - Rounding and interpretation of limiting values (Reconfirmed 2018)
AS/NZS 1050.14:1994 Methods for the analysis of iron and steel Determination of manganese in iron and steel - Titrimetric method
AS 1100.201-1992 Technical drawing Mechanical engineering drawing (Reconfirmed 2014)
AS 1929-1981 Non-destructive testing - Glossary of terms
AS/NZS 1050.27:1994 Methods for the analysis of iron and steel Determination of titanium content - Spectrophotometric method (Reconfirmed 2016)
AS/NZS 1050.8:1994 Methods for the analysis of iron and steel Determination of manganese content - Spectrophotometric method (Reconfirmed 2016)
AS/NZS 1050.6:1995 Methods for the analysis of iron and steel Determination of tin content - Flame atomic absorption spectrometric method (Reconfirmed 2016)
AS/NZS 1050.37:1994 Methods for the analysis of iron and steel Determination of copper content - Flame atomic absorption spectrometric method (Reconfirmed 2016)
AS 2205.5.1-1997 Methods for destructive testing of welds in metal Macro metallographic test for cross-section examination
AS 1003-1971 Engineers' straightedges (metric units)

AS 1085.14-2012 Railway track material Prestressed concrete sleepers
AS 1085.10-2002 Railway track material Rail anchors
AS 1085.20-2006 Railway track material - Part 20: Welding of steel rail
AS 1085.20-2012 Railway track material Welding of steel rail
AS 1418.1-2002 Cranes, hoists and winches General requirements
AS 1085.2-2002 Railway track material Fishplates
AS 1085.3-2002 Railway track material Sleeper plates (Reconfirmed 2013)
AS 4292.2-2006 Railway safety management Track, civil and electrical infrastructure
AS 1085.4-2002 Railway track material Fishbolts and nuts (Reconfirmed 2013)
AS 1085.15-1995 Railway permanent way material - Part 15: Aluminothermic rail welding
AS 1085.8-2002 Railway track material Dogspikes
AS 1085.12-2002 Railway track material Insulated joint assemblies (Reconfirmed 2013)

View more information
US$66.05
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.