AS 1472-2003
Current
The latest, up-to-date edition.
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
English
01-08-2003
Specifies requirements for carbon steel spring wire of round cross-section for mechanical springs, supplied in the following forms: hard-drawn, drawn metallic coated, oil-hardened and tempered, or soft-drawn.
This Standard specifies requirements for carbon steel spring wire of round cross-section for mechanical springs, supplied in one of the following conditions: (a) Hard-drawn. (b) Drawn metallic coated, e.g. drawn-galvanized. (c) Oil-hardened and tempered.(d) Soft-drawn. This Standard applies to wire supplied in the form of coils. It does not cover the testing of wire that is supplied in mechanically straightened cut-lengths, or wire that has been straightened by the user. NOTES: 1 Spring wires for bedding and seating applications are covered by AS 2266. 2 In this Standard the term ‘drawing’, alone or in combination, or a variation of ‘drawing’, such as ‘drawn’, is intended to embrace any other technically feasible means, such as ‘rolling’, by which cold-working of steel feedstock enables wire of round cross-section to be achieved. 3 Mechanical straightening introduces small, but significant, changes in diameter and mechanical properties (e.g. tensile strength) of as-drawn spring wire, and the degree of change varies with the straightening technique employed. 4 Advice and recommendations on information to be supplied by the purchaser at the time of enquiry or order are contained in the purchasing guidelines set out in Appendix A. 5 Alternative means for determining compliance with this Standard are given in Appendix B.
Committee |
MT-001
|
DocumentType |
Standard
|
ISBN |
0 7337 4996 8
|
Pages |
16
|
ProductNote |
Reconfirmed 23/09/2016.This standard has been reconfirmed in Australia in 2016 and remains current in New Zealand. Reconfirmation Notice 23/09/2016
|
PublisherName |
Standards Australia
|
Status |
Current
|
Supersedes |
First published as AS 1472-1973.Second edition 1979.Third edition 1991.Fourth edition 2003.Reconfirmed 2016. Originated as AS 1472-1973. Previous edition AS 1472-1991. Fourth edition 2003.
AS/NZS 1050.30:1994 | Methods for the analysis of iron and steel Determination of boron content - Curcumin spectrophotometric method |
HB 18.28-2005 | Conformity assessment - Guidance on a third-party certification system for products |
AS/NZS 1050.1:1996 | Methods for the analysis of iron and steel Sampling iron and steel for chemical analysis |
AS/NZS 1050.16:1994 | Methods for the analysis of iron and steel Determination of sulfur content - Infrared absorption method after combustion in an induction furnace (Reconfirmed 2017) |
HB 18.28-1991 | Guidelines for third-party certification and accreditation - Guide 28: General rules for a model third-party certification system for products |
AS 1391-2007 | Metallic materials - Tensile testing at ambient temperature |
AS 2338-1980 | Preferred dimensions of wrought metal products |
AS/NZS 1050.28:1994 | Methods for the analysis of iron and steel Vanadium in steel - Potentiometric method (Reconfirmed 2016) |
AS 1442-2007 | Carbon steels and carbon-manganese steels - Hot rolled bars and semifinished products (Reconfirmed 2017) |
AS 1399-1990 | Guide to AS 1199 - Sampling procedures and tables for inspection by attributes |
AS/NZS 1050.20:1994 | Methods for the analysis of iron and steel Determination of magnesium content - Flame atomic absorption spectrometric method (Reconfirmed 2016) |
AS 2505.6-2002 | Metallic materials Wire - Wrapping test |
AS/NZS 1050.27:1994 | Methods for the analysis of iron and steel Determination of titanium content - Spectrophotometric method (Reconfirmed 2016) |
AS 3942-1993 | Quality control - Variables charts - Guide |
AS/NZS ISO 9001:2000 | Quality management systems - Requirements |
AS 1442-1992 | Carbon steels and carbon-manganese steels - Hot-rolled bars and semifinished products |
AS/NZS 4534:2006 | Zinc and zinc/aluminium-alloy coatings on steel wire (Reconfirmed 2017) |
AS/NZS 4534:1998 | Zinc and zinc/aluminium-alloy coatings on steel wire |
AS/NZS 1050.8:1994 | Methods for the analysis of iron and steel Determination of manganese content - Spectrophotometric method (Reconfirmed 2016) |
AS/NZS 1050.6:1995 | Methods for the analysis of iron and steel Determination of tin content - Flame atomic absorption spectrometric method (Reconfirmed 2016) |
AS/NZS 1050.37:1994 | Methods for the analysis of iron and steel Determination of copper content - Flame atomic absorption spectrometric method (Reconfirmed 2016) |
AS/NZS 1050.24:1994 | Methods for the analysis of iron and steel Determination of aluminium content - Spectrophotometric method (Reconfirmed 2016) |
AS/NZS 1050.2:1994 | Methods for the analysis of iron and steel Determination of carbon content - Gravimetric method (Reconfirmed 2016) |
AS 1391-1991 | Methods for tensile testing of metals |
AS/NZS 1050.31:1994 | Methods for the analysis of iron and steel Determination of niobium content - PAR spectrophotometric method (Reconfirmed 2016) |
AS/NZS 1050.21:1994 | Methods for the analysis of iron and steel Determination of cobalt content - Spectrophotometric method (Reconfirmed 2016) |
AS 2266-2002 | Carbon steel spring wire for bedding and seating |
AS/NZS 1050.39:1994 | Methods for the analysis of iron and steel Determination of chromium content - Flame atomic absorption spectrometric method (Reconfirmed 2016) |
AS/NZS ISO 9004:2000 | Quality management systems - Guidelines for performance improvements |
AS 2706-1984 | Numerical values - Rounding and interpretation of limiting values |
AS/NZS 1050.26:1994 | Methods for the analysis of iron and steel Silicon in iron and steel - Spectrophotometric method (Reconfirmed 2016) |
AS/NZS 1050.32:1994 | Methods for the analysis of iron and steel Determination of carbon content - Infrared method (Reconfirmed 2017) |
AS/NZS 1050.18:1994 | Methods for the analysis of iron and steel Determination of phosphorus - Spectrophotometric method (Reconfirmed 2016) |
AS 2338-2004 | Preferred dimensions of wrought metal products |
AS/NZS 1050.38:1994 | Methods for the analysis of iron and steel Determination of vanadium content - Flame atomic absorption spectrometric method (Reconfirmed 2016) |
AS/NZS 1050.14:1994 | Methods for the analysis of iron and steel Determination of manganese in iron and steel - Titrimetric method |
AS 2706-2003 | Numerical values - Rounding and interpretation of limiting values (Reconfirmed 2018) |
AS 2505.5-2002 | Metallic materials Wire - Simple torsion test |
AS 1199-1988 | Sampling procedures and tables for inspection by attributes |
AS 2427-2004 | Smoke/heat release vents |
AS 2266-2002 | Carbon steel spring wire for bedding and seating |
AS 4032.4:2014 | Water supply - Valves for the control of heated water supply temperatures Thermostatically controlled taps for the control of heated water supply temperatures |
AS/NZS 2845.1:1998 | Water supply - Backflow prevention devices Materials, design and performance requirements |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.