• There are no items in your cart

AS 2321-2006

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Short-link chain for lifting purposes
Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Superseded date

06-30-2017

Language(s)

English

Published date

01-01-2006

Preview

1 - AS 2321-2006 SHORT-LINK CHAIN FOR LIFTING PURPOSES
4 - PREFACE
5 - CONTENTS
6 - 1 SCOPE
6 - 2 REFERENCED DOCUMENTS
7 - 3 DEFINITIONS
7 - 3.1 Barrel
7 - 3.2 Breaking force
7 - 3.3 Competent person
7 - 3.4 Design factor
7 - 3.5 Finished condition
7 - 3.6 Gauge length
7 - 3.7 Mean diameter (dm)
7 - 3.8 Mean stress
7 - 3.9 Nominal chain size (d)
7 - 3.10 Nominal material size (dn)
7 - 3.11 Non-calibrated chain
7 - 3.12 Processing
7 - 3.13 Proof force
8 - 3.14 Self colour
8 - 3.15 Shall
8 - 3.16 Should
8 - 3.17 Tensile test sample
8 - 3.18 Total elongation
8 - 3.19 Working load limit (WLL)
8 - 4 MATERIAL
9 - 5 DESIGN AND MANUFACTURE
9 - 5.1 Dimensions and tolerances
9 - 5.2 Welding
12 - 5.3 Links inserted in the course of manufacture
12 - 5.4 Kinking
12 - 5.5 Visual examination
12 - 6 MECHANICAL PROPERTIES
12 - 6.1 Permanent deformation
12 - 6.2 Strength
12 - 7 MARKING
12 - 7.1 General
12 - 7.2 Information
13 - 8 TESTING OF MECHANICAL PROPERTIES
13 - 9 PROOF TESTING
13 - 9.1 Proof force
13 - 9.2 Requirements
13 - 9.3 Test certificate
14 - APPENDIX A - INFORMATION THAT SHOULD BE SUPPLIED WITH ENQUIRIES AND ORDERS
15 - APPENDIX B - CARE AND USE
15 - B1 WORKING LOAD LIMIT (WLL)
15 - B2 HYDROGEN EMBRITTLEMENT
15 - B3 EFFECTS OF HOT ENVIRONMENTS
15 - B4 LOW TEMPERATURE
15 - B5 HEAT TREATMENT
15 - B6 CORROSIVE ENVIRONMENT
15 - B7 GALVANIZING
16 - B8 EXTENDING THE USEFUL LIFE
16 - B9 INSPECTION
17 - APPENDIX C - STANDARDS FOR COMPONENTS USED IN LIFTING SYSTEMS
18 - APPENDIX D - CHAIN FINISHES OTHER THAN SELF-COLOUR
19 - APPENDIX E - TEST FORCES AND CONDITIONS FOR THEIR APPLICATION
19 - E1 TENSILE TEST SAMPLE
19 - E2 CONDITIONS
22 - APPENDIX F - MEANS FOR DEMONSTRATING COMPLIANCE WITH THIS STANDARD
22 - F1 SCOPE
22 - F2 STATISTICAL SAMPLING
22 - F3 PRODUCT CERTIFICATION
23 - F4 SUPPLIER'S QUALITY MANAGEMENT SYSTEM
23 - F5 OTHER MEANS OF ASSESSMENT
24 - APPENDIX G - DETERMINATION OF ELONGATION
24 - G1 GENERAL
24 - G2 DETERMINATION OF PLASTIC ELONGATION OF BROKEN TEST SAMPLE.
25 - G3 DETERMINATION OF TOTAL ELONGATION OF UNBROKEN TEST SAMPLE
25 - G4 DETERMINATION OF TOTAL ULTIMATE ELONGATION.

Specifies requirements for non-calibrated chain for lifting purposes, which are manufactured from electrically welded round-steel short links.

This Standard specifies requirements for non-calibrated short-link chain for lifting purposes, which are manufactured from electrically welded round-steel short links.Guidance on information that should be supplied with enquiries and orders is given in Appendix A.Guidance on care and use of chain is given in Appendix B.Standards for components that are used in lifting systems are listed in Appendix C.

Committee
ME-025
DocumentType
Standard
ISBN
0 7337 7507 1
Pages
21
PublisherName
Standards Australia
Status
Superseded
SupersededBy
Supersedes
UnderRevision

First published as AS 2321-1979.Second edition 2001.Third edition 2006. Originated as AS 2321-1979. Third edition 2006.

AS 1199.1-2003 Sampling procedures for inspection by attributes Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (Reconfirmed 2016)
AS 1789-2003 Electroplated zinc (electrogalvanized) coatings on ferrous articles (batch process) (Reconfirmed 2017)
AS 1442-2007 Carbon steels and carbon-manganese steels - Hot rolled bars and semifinished products (Reconfirmed 2017)
AS/NZS 4680:2006 Hot-dip galvanized (zinc) coatings on fabricated ferrous articles (Reconfirmed 2017)
HB 18.28-2005 Conformity assessment - Guidance on a third-party certification system for products
AS 1418.1-2002 Cranes, hoists and winches General requirements
AS 1442-1992 Carbon steels and carbon-manganese steels - Hot-rolled bars and semifinished products
AS 1444-1996 Wrought alloy steels - Standard, hardenability (H) series and hardened and tempered to designated mechanical properties
AS 2193-2005 Calibration and classification of force-measuring systems (Reconfirmed 2017)
AS 1627.6-2003 Metal finishing - Preparation and pretreatment of surfaces Chemical conversion treatment of metals (Reconfirmed 2017)
AS 1199.0-2003 Sampling procedures for inspection by attributes Introduction to the ISO 2859 attribute sampling system (Reconfirmed 2016)
AS 1444-2007 Wrought alloy steels - Standard, hardenability (H) series and hardened and tempered to designated mechanical properties (Reconfirmed 2017)

AS 1418.3-1997 Cranes, hoists and winches Bridge, gantry, portal (including container cranes) and jib cranes (Reconfirmed 2016)
AS 2550.1-2011 Cranes, hoists and winches - Safe use General requirements
AS/NZS 1576.1:2010 Scaffolding General requirements
AS 3585-2008 End fittings for synthetic flat-webbing and round slings (Reconfirmed 2019)
AS 4685.1:2014 Playground equipment and surfacing General safety requirements and test methods (EN 1176-1:2008, MOD)
AS/NZS 1576.1:1995 Scaffolding General requirements
AS 4722-2009 Passenger ropeways and passenger conveyors
AS 3751-2005 Underground mining - Slope haulage - Couplings, drawbars, and safety chains
AS 3776-2006 Lifting components for Grade T chain slings
AS/NZS 4576:1995 Guidelines for scaffolding
AS 1418.1-2002 Cranes, hoists and winches General requirements
AS 3533.4.2-2013 Amusement rides and devices Specific requirements - Contained play facilities
AS/NZS 1891.1:2007 Industrial fall-arrest systems and devices Harnesses and ancillary equipment
AS 1666.2-2009 Wire-rope slings Care and use (Reconfirmed 2019)
AS 3533.1-2009 Amusement rides and devices Design and construction
AS 3777-2008 Shank hooks and large eye hooks - Maximum 60 t (Reconfirmed 2019)
AS 2316.1-2009 Artificial climbing structures and challenge courses Fixed and mobile artificial climbing and abseiling walls
AS 2601-2001 The demolition of structures
AS 1666.1-2009 Wire-rope slings Product specification (Reconfirmed 2019)

View more information
US$69.34
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.