04/30122631 DC : DRAFT SEP 2004
|
CEN/BT/TF 158 N12 - DISPENSE SYSTEMS FOR DRAUGHT BEVERAGES - PART 9: CONNECTORS AND SOCKETS FOR BEVERAGE CONTAINERS, MATING DIMENSIONS
|
BS 3382-7:1966
|
Specification for electroplated coatings on threaded components Thicker platings for threaded components
|
BS 4521-4:1975
|
Specification for railway turnouts for private users Heavy grade turnouts over which British Railways locomotives do not operate, for axle loads which may exceed 25 tons, using flat bottom rails
|
BS SP8(1939) : 1939
|
SPECIFICATION FOR TURNBUCKLES (TENSION ROD TYPE) FOR AIRCRAFT PURPOSES
|
BS 31:1940
|
Specification. Steel conduit and fittings for electrical wiring
|
BS 10:1962
|
Specification for flanges and bolting for pipes, valves, and fittings
|
BS 3777:1964
|
Specification for screw thread measuring cylinders
|
BS 959:1950
|
Specification for internal micrometers (including stick micrometers)
|
BS 3382-3&4(1965) : 1965
|
SPECIFICATION FOR ELECTROPLATED COATINGS ON THREADED COMPONENTS - NICKEL OR NICKEL PLUS CHROMIUM ON STEEL COMPONENTS - NICKEL OR NICKEL PLUS CHROMIUM ON COPPER AND COPPER ALLOY (INCLUDING BRASS) COMPONENTS
|
BS 341-1:1991
|
Transportable gas container valves Specification for industrial valves for working pressures up to and including 300 bar
|
BS 1212-1:1990
|
Float operated valves Specification for piston type float operated valves (copper alloy body) (excluding floats)
|
BS 949-2:1992
|
Screwing taps Specification for unified ground thread taps. Manufacturing tolerances
|
BS 9133 N001-003(1975) : 1975
|
DETAIL SPECIFICATION FOR SINGLE TURN LOW POWER NON-WIRE WOUND ROTARY POTENTIOMETERS - SPINDLE INSULATED FROM RESISTANCE ELEMENT, SPINDLE AND PANEL SEALED OR CONTAINER, SPINDLE AND PANEL SEALED - FULL ASSESSMENT LEVEL
|
BS 1936-1:1952
|
Undercuts and runouts for screw threads Inch screw threads
|
BS 2464:1954
|
Specification for hose couplings for petrol, oil and lubricants (¾ in. to 4 in. nominal sizes)
|
BS 2580:1979
|
Specification for underground plug cocks for cold water services
|
BS 3382-1&2(1961) : 1961
|
SPECIFICATION FOR ELECTROPLATED COATINGS ON THREADED COMPONENTS - CADMIUM ON STEEL COMPONENTS - ZINC ON STEEL COMPONENTS
|
BS 4521-3.1:1974
|
Specification for railway turnouts for private users. Medium grade turnouts over which British Railways locomotives do not operate, for axle loads not exceeding 25 tons Turnouts using bull head rail
|
BS 4521-1.1:1971
|
Specification for railway turnouts for private users. Turnouts over which British Railways locomotives operate Turnouts using bull head rails
|
BS 341-3:2002
|
Transportable gas container valves Valve outlet connections
|
BS 3382-5&6(1967) : 1967
|
SPECIFICATION FOR ELECTROPLATED COATINGS ON THREADED COMPONENTS - TIN ON COPPER AND COPPER ALLOY (INCLUDING BRASS) COMPONENTS - SILVER ON COPPER AND COPPER ALLOY (INCLUDING BRASS) COMPONENTS
|
BS 4278:1984
|
Specification for eyebolts for lifting purposes
|
BS 5306-2:1990
|
Fire extinguishing installations and equipment on premises Specification for sprinkler systems
|
BS 919-2:1971
|
Specification for screw gauge limits and tolerances Gauges for screw threads of Whitworth and BA forms
|
BS 1157:1975
|
Recommendations for tapping drill sizes for use with fluted taps
|
BS 2853:1957
|
Specification for the design and testing of steel overhead runway beams
|
BS 64:1992
|
Specification for normal and high strength steel bolts and nuts for railway rail fishplates
|
BS 2470:1973
|
Specification for hexagon socket screws and wrench keys. Inch series
|
DIN 3542 E : SUSPENDED
|
CONNECTORS AND SOCKETS FOR BEVERAGE CONTAINERS - MATING DIMENSIONS
|
BS 916:1953
|
Specification for black bolts, screws and nuts, hexagon and square, with B.S.W. threads, and partly machined bolts, screws and nuts, hexagon and square, with B.S.W. or B.S.F. threads
|
BS 1184:1976
|
Specification. Copper and copper alloy traps
|
BS 1790:1961
|
Specification for length bars and their accessories (imperial units)
|
BS 1968:1953
|
Specification for floats for ballvalves (copper)
|
BS 1010-2:1973
|
Specification for draw-off taps and stopvalves for water services (screw-down pattern) Draw-off taps and above-ground stopvalves
|
BS 325:1947
|
Specification for black cup and countersunk bolts and nuts
|
BS 4521-1.2:1971
|
Specification for railway turnouts for private users. Turnouts over which British Railways locomotives operate Turnouts using flat bottom rail
|
BS 768:1958
|
Specification for slotted grub screws
|
BS 1083:1965
|
Specification for precision hexagon bolts, screws and nuts (B.S.W. & B.S.F. threads)
|
BS 856:1969
|
Specification for wing nuts
|
BS 3A 100:1991
|
Specification for general requirements for bolts and free running nuts of tensile strength not exceeding 1249 MPa
|
BS 4521-2:1975
|
Specification for railway turnouts for private users Light grade turnouts over which British Railways locomotives do not operate, for axle loads not exceeding 10 tons, using flat bottom rails
|
BS 3551:1962
|
Specification for alloy steel shackles
|
BS 811:1950
|
Specification for cycle (B.S.C.) threads (formerly known as C.E.I. threads)
|
BS 327:1964
|
Specification for power-driven derrick cranes
|
BS 5433:1976
|
Specification for underground stopvalves for water services
|
BS A55 & A56(1951) : 1951
|
SPECIFICATIONS FOR GRUB SCREWS FOR AERONAUTICAL PURPOSES
|
BS 2452:1954
|
Specification for electrically driven jib cranes mounted on a high pedestal or portal carriage (high pedestal or portal jib cranes)
|
BS 1580-1&2(1962) : 1962
|
SPECIFICATION FOR UNIFIED SCREW THREADS - DIAMETERS 1/4 INCH AND LARGER
|
BS 2827:1957
|
Specification for machine screw nuts, pressed type (B.A. and Whitworth form threads)
|
BS 357:1958
|
Specification for power-driven travelling jib cranes (rail-mounted low carriage type)
|
BS 5386-3:1980
|
Specification for gas burning appliances Domestic cooking appliances burning gas
|
BS 5590:1978
|
Specification for screw thread metric series measuring cylinders
|
BS 4521-3.2:1975
|
Specification for railway turnouts for private users. Medium grade turnouts over which British Railways locomotives do not operate, for axle loads not exceeding 25 tons Turnouts using flat bottom rails
|
BS 3SP 3:1943
|
Specification for aircraft material. Fork joints (low tensile type) (for sizes No. 4 B.A. to ½ inch B.S.F. inclusive)
|
BS 1802:1951
|
Specification for steel spring washers for general engineering and automobile purposes
|
BS 450:1958
|
Specification for machine screws and machine screw nuts (B.S.W. & B.S.F. threads)
|
BS 3818:1964
|
Specification for self-sealing fuelling couplings for diesel locomotives and diesel railcars
|
BS AU 50-2.3:1994
|
Tyres and wheels. Wheels and rims Specification for road-wheel nuts, studs and bolts for commercial vehicles
|
BS 1494-1:1964
|
Specification for fixing accessories for building purposes Fixings for sheet, roof and wall coverings
|
DEFSTAN 62-9(PT1)/1(1974) : 1974
|
LAMPHOLDERS; LIGHTS, INDICATOR; AND LENSES, INDICATOR LIGHT; FOR USE IN EQUIPMENTS - PART 1: GENERIC SPECIFICATION
|