BS EN 12828 : 2012
Current
The latest, up-to-date edition.
Hardcopy , PDF
English
01-01-2012
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and symbols
4 System design requirements
5 Instructions for operation, maintenance and use
6 Installation and commissioning
Annex A (informative) - Control system classification
Annex B (informative) - Thermal Environment
Annex C (informative) - Thermal insulation
Annex D (informative) - Guidance for dimensioning diaphragm
expansion vessels and pressurisation systems
(sealed systems)
Annex E (informative) - Safety valves for heating systems
Annex F (informative) - A-deviations
Bibliography
National Annex NA (informative) - Guidance to support
the use of BS EN 12828:2012+A1:2014
in the UK
Defines design criteria for water based heating systems in buildings with a maximum operating temperature of up to 105 degrees C.
Committee |
RHE/24
|
DevelopmentNote |
Supersedes 97/707298 DC. (09/2003) Together with BS EN 12831 and BS EN 14336, it supersedes BS 5449(1990). (01/2009) Supersedes 11/30240282 DC. (11/2013) 2012 Edition Re-Issued in April 2014 & incorporates AMD 1 2014. Supersedes 13/30283773 DC. (05/2014)
|
DocumentType |
Standard
|
Pages |
76
|
PublisherName |
British Standards Institution
|
Status |
Current
|
Supersedes |
Standards | Relationship |
UNE-EN 12828:2003 | Identical |
SN EN 12828 : 2012 + A1 2014 | Identical |
DIN EN 12828:2014-07 | Identical |
NF EN 12828 : 2013 + A1 2014 | Identical |
UNI EN 12828 : 2014 | Identical |
I.S. EN 12828:2012 | Identical |
NS EN 12828 : 2012 + A1 2014 | Identical |
NEN EN 12828 : 2012 + A1 2014 | Identical |
EN 12828:2012+A1:2014 | Identical |
NBN EN 12828 : 2013 + A1 2014 | Identical |
DIN EN 12828:2003-06 | Identical |
10/30213917 DC : 0 | BS 8660-1 - GAS-FIRED MICRO-COGENERATION APPLIANCES OF RATED THERMAL INPUT NOT EXCEEDING 70 KW NET - PART 1: SPECIFICATION FOR SELECTION, INSTALLATION, INSPECTION, COMMISSIONING, SERVICING AND MAINTENANCE OF STIRLING ENGINE MICRO-COGENERATION APPLIANCES |
11/30228295 DC : 0 | BS 8558 - GUIDE TO THE DESIGN, INSTALLATION, TESTING, OPERATION AND MAINTENANCE OF SERVICES SUPPLYING WATER FOR DOMESTIC USE WITHIN BUILDINGS AND THEIR CURTILAGES - COMPLEMENTARY GUIDANCE TO BS EN 806 |
BS EN 12831:2003 | Heating systems in buildings. Method for calculation of the design heat load |
BS 5410-1:2014 | Code of practice for oil firing Installations up to 45 kW output capacity for space heating and hot water supply purposes |
EN 12831 : 2003 | HEATING SYSTEMS IN BUILDINGS - METHOD FOR CALCULATION OF THE DESIGN HEAT LOAD |
BS 7593:2006 | Code of practice for treatment of water in domestic hot water central heating systems |
BS 8558:2015 | Guide to the design, installation, testing and maintenance of services supplying water for domestic use within buildings and their curtilages. Complementary guidance to BS EN 806 |
BS 5546:2010 | Specification for installation and maintenance of gas-fired water-heating appliances of rated input not exceeding 70 kW net |
13/30261683 DC : 0 | BS 6798 - SPECIFICATION FOR SELECTION, INSTALLATION, INSPECTION, COMMISSIONING, SERVICING AND MAINTENANCE OF GAS-FIRED BOILERS OF RATED INPUT NOT EXCEEDING 70 KW NET |
11/30229801 DC : 0 | BS 6644 - SPECIFICATION FOR THE INSTALLATION OF GAS-FIRED HOT WATER BOILERS OF RATED INPUTS BETWEEN 70 KW (NET) AND 1.8 MW (NET) (2ND AND 3RD FAMILY GASES) |
09/30169955 DC : 0 | BS 8511 - CODE OF PRACTICE FOR THE INSTALLATION OF SOLID FUEL HEATING APPLIANCES ON BOATS |
16/30347136 DC : 0 | BS 8303 - INSTALLATION OF DOMESTIC HEATING AND COOKING APPLIANCES BURNING WOOD, WOODY BIOMASS AND SOLID MINERAL FUELS - SPECIFICATION |
BS 6798:2009 | Specification for installation and maintenance of gas-fired boilers of rated input not exceeding 70 kW net |
BS 5918:2015 | Solar heating systems for domestic hot water. Code of practice for design and installation |
BS 5871-1:2005 | Specification for the installation and maintenance of gas fires, convector heaters, fire/back boilers and decorative fuel effect gas appliances Gas fires, convector heaters, fire/back boilers and heating stoves (2nd and 3rd family gases) |
BS 6798:2014 | Specification for selection, installation, inspection, commissioning, servicing and maintenance of gas-fired boilers of rated input not exceeding 70 kW net |
BS 6644:2011 | Specification for the installation and maintenance of gas-fired hot water boilers of rated inputs between 70 kW (net) and 1.8 MW (net) (2nd and 3rd family gases) |
BS 8558:2011 | Guide to the design, installation, testing and maintenance of services supplying water for domestic use within buildings and their curtilages. Complementary guidance to BS EN 806 |
BS 8511:2010 | Code of practice for the installation of solid fuel heating and cooking appliances in small craft |
14/30285453 DC : 0 | BS 5410-1 - CODE OF PRACTICE FOR OIL FIRING - PART 1: INSTALLATIONS UP TO 45 KW OUTPUT CAPACITY FOR SPACE HEATING AND HOT WATER SUPPLY PURPOSES |
EN 14336:2004 | Heating systems in buildings - Installation and commissioning of water based heating systems |
09/30166542 DC : 0 | BS 5546 - SPECIFICATION FOR INSTALLATION AND MAINTENANCE OF GAS-FIRED WATER-HEATING APPLIANCES OF RATED INPUT NOT EXCEEDING 70 KW NET |
BS 8660-1:2011 | Gas-fired micro-cogeneration appliances of rated thermal input not exceeding 70 kW net Specification for selection, installation, inspection, commissioning, servicing and maintenance of Stirling engine micro-cogeneration appliances |
15/30299694 DC : 0 | BS 8558 - GUIDE TO THE DESIGN, INSTALLATION, TESTING AND MAINTENANCE OF SERVICES SUPPLYING WATER FOR DOMESTIC USE WITHIN BUILDINGS AND THEIR CURTILAGES - COMPLEMENTARY GUIDANCE TO BS EN 806 |
05/30133509 DC : DRAFT SEP 2005 | BS 7593 - CODE OF PRACTICE FOR TREATMENT OF WATER IN DOMESTIC HOT WATER CENTRAL HEATING SYSTEMS |
BS EN 14336:2004 | Heating systems in buildings. Installation and commissioning of water based heating systems |
EN 1264-4:2009 | Water based surface embedded heating and cooling systems - Part 4: Installation |
EN 442-3:2003 | Radiators and convectors - Part 3: Evaluation of conformity |
BS EN 12170:2002 | Heating systems in buildings. Procedure for the preparation of documents for operation, maintenance and use. Heating systems requiring a trained operator |
BS EN ISO 21003-2 : 2008 | MULTILAYER PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS INSIDE BUILDINGS - PART 2: PIPES |
EN 1264-3:2009 | Water based surface embedded heating and cooling systems - Part 3: Dimensioning |
IEC 60730-2-9:2015 RLV | Automatic electrical controls - Part 2-9: Particular requirements for temperature sensing controls |
EN 1503-4:2016 | Valves - Materials for bodies, bonnets and covers - Part 4: Copper alloys specified in European Standards |
EN 215 : 2004 AMD 1 2006 | THERMOSTATIC RADIATOR VALVES - REQUIREMENTS AND TEST METHODS |
EN 442-1:2014 | Radiators and convectors - Part 1: Technical specifications and requirements |
ISO 4126-1:2013 | Safety devices for protection against excessive pressure Part 1: Safety valves |
EN 12953-6:2011 | Shell Boilers - Part 6: Requirements for equipment for the boiler |
BS EN 12171:2002 | Heating systems in buildings. Procedure for the preparation of documents for operation, maintenance and use. Heating systems not requiring a trained operator |
EN 1264-5:2008 | Water based surface embedded heating and cooling systems - Part 5: Heating and cooling surfaces embedded in floors, ceilings and walls - Determination of the thermal output |
EN 1503-3:2000/AC:2001 | VALVES - MATERIALS FOR BODIES, BONNETS AND COVERS - PART 3: CAST IRONS SPECIFIED IN EUROPEAN STANDARDS |
ISO 13732-1:2006 | Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces |
EN 60730-2-9:2010 | Automatic electrical controls for household and similar use - Part 2-9: Particular requirements for temperature sensing controls |
EN 1503-2:2000 | Valves - Materials for bodies, bonnets and covers - Part 2: Steels other than those specified in European Standards |
BS 6880-2:1988 | Code of practice for low temperature hot water heating systems of output greater than 45 kW Selection of equipment |
BS EN 14336:2004 | Heating systems in buildings. Installation and commissioning of water based heating systems |
BS EN 60335-2-73 : 2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-73: PARTICULAR REQUIREMENTS FOR FIXED IMMERSION HEATERS |
ISO 15927-5:2004 | Hygrothermal performance of buildings Calculation and presentation of climatic data Part 5: Data for design heat load for space heating |
BS 7074-1:1989 | Application, selection and installation of expansion vessels and ancillary equipment for sealed water systems Code of practice for domestic heating and hot water supply |
BS 6880-1:1988 | Code of practice for low temperature hot water heating systems of output greater than 45 kW Fundamental and design considerations |
EN 1503-1:2000 | Valves - Materials for bodies, bonnets and covers - Part 1: Steels specified in European Standards |
ISO 7726:1998 | Ergonomics of the thermal environment Instruments for measuring physical quantities |
EN 15316-1:2017 | Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 1: General and Energy performance expression, Module M3-1, M3-4, M3-9, M8-1, M8-4 |
BS 1566-1(2002) : 2002 | COPPER INDIRECT CYLINDERS FOR DOMESTIC PURPOSES - PART 1: OPEN VENTED COPPER CYLINDERS - REQUIREMENTS AND TEST METHODS |
EN ISO 13732-1:2008 | Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces (ISO 13732-1:2006) |
VDI 2035 Blatt 2:2009-08 | Prevention of damage in water heating installations - Water-side corrosion |
EN ISO 7726:2001 | Ergonomics of the thermal environment - Instruments for measuring physical quantities (ISO 7726:1998) |
BS 3198:1981 | Specification for copper hot water storage combination units for domestic purposes |
EN ISO 15927-5:2004/A1:2011 | Hygrothermal performance of buildings - Calculation and presentation of climatic data - Part 5: Data for design heat load for space heating - Amendment 1 (ISO 15927-5:2004/Amd 1:2011) |
EN ISO 8044:2015 | Corrosion of metals and alloys - Basic terms and definitions (ISO 8044:2015) |
EN ISO 7730:2005 | Ergonomics of the thermal environment - Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria (ISO 7730:2005) |
ISO 8044:2015 | Corrosion of metals and alloys Basic terms and definitions |
ISO 12241:2008 | Thermal insulation for building equipment and industrial installations Calculation rules |
EN 12170:2002 | Heating systems in buildings - Procedure for the preparation of documents for operation, maintenance and use - Heating systems requiring a trained operator |
EN 806-2:2005 | Specification for installations inside buildings conveying water for human consumption - Part 2: Design |
EN ISO 12241:2008 | Thermal insulation for building equipment and industrial installations - Calculation rules (ISO 12241:2008) |
ISO 7730:2005 | Ergonomics of the thermal environment — Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria |
BS 7206:1990 | Specification for unvented hot water storage units and packages |
EN 1264-2:2008+A1:2012 | Water based surface embedded heating and cooling systems - Part 2: Floor heating: Prove methods for the determination of the thermal output using calculation and test methods |
EN 442-2:2014 | Radiators and convectors - Part 2: Test methods and rating |
EN 1264-1:2011 | Water based surface embedded heating and cooling systems - Part 1: Definitions and symbols |
BS EN 12831:2003 | Heating systems in buildings. Method for calculation of the design heat load |
EN 12171:2002 | Heating systems in buildings - Procedure for the preparation of documents for operation, maintenance and use - Heating systems not requiring a trained operator |
EN 10226-1:2004 | Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation |
EN 14336:2004 | Heating systems in buildings - Installation and commissioning of water based heating systems |
EN 12831 : 2003 | HEATING SYSTEMS IN BUILDINGS - METHOD FOR CALCULATION OF THE DESIGN HEAT LOAD |
BS 8558:2011 | Guide to the design, installation, testing and maintenance of services supplying water for domestic use within buildings and their curtilages. Complementary guidance to BS EN 806 |
EN ISO 4126-1:2013/A1:2016 | SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 1: SAFETY VALVES (ISO 4126-1:2013/AMD 1:2016) |
BS 6880-3:1988 | Code of practice for low temperature hot water heating systems of output greater than 45 kW Installation, commissioning and maintenance |
EN 15500:2008 | Control for heating, ventilating and air-conditioning applications - Electronic individual zone control equipment |
EN 12098-1:2017 | Energy Performance of Buildings - Controls for heating systems - Part 1: Control equipment for hot water heating systems - Modules M3-5, 6, 7, 8 |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.