• There are no items in your cart

CGA S 1.3 : 2008

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

PRESSURE RELIEF DEVICE STANDARDS - PART 3: STATIONARY STORAGE CONTAINERS FOR COMPRESSED GASES

Superseded date

10-16-2023

Published date

01-12-2013

1 Introduction
2 Scope and purpose
   2.1 Scope
   2.2 Purpose
3 Definitions
4 Types of pressure relief devices
5 Application requirements for pressure relief devices
   5.1 General
   5.2 Piping of pressure relief systems
   5.3 Commodity-based requirements
   5.4 Jacket relief device
6 Design and construction requirements for pressure
   relief devices
   6.1 General
   6.2 Flow capacities for conditions other than fire
   6.3 Flow capacities under fire conditions
   6.4 Pressure relief valves
   6.5 Nonreclosing devices
   6.6 Nonreclosing device in combination with a pressure
       relief valve
   6.7 Breaking pin devices in combination with a pressure
       relief valve
7 Tests of pressure relief devices
   7.1 Pressure tests of pressure relief valves
   7.2 Flow capacity tests of pressure relief valves
   7.3 Test of pressure relief devices other than pressure relief
       valves
   7.4 Rejected material
8 Identification
9 Maintenance requirements for pressure relief devices
10 References
11 Additional references
Tables

Describes the requirements of various regulations, codes, standards, or specifications applicable to storage containers for compressed gases.

DocumentType
Standard
PublisherName
Compressed Gas Association
Status
Superseded
SupersededBy

14/30259637 DC : 0 BS EN ISO 21013-3 - CRYOGENIC VESSELS - PRESSURE-RELIEF ACCESSORIES FOR CRYOGENIC SERVICE - PART 3: SIZING AND CAPACITY DETERMINATION
13/30271407 DC : DRAFT DEC 2013 BS ISO 16924 - NATURAL GAS FUELLING STATIONS - LNG STATIONS FOR FUELLING VEHICLES
CGA PS 8 : 2004 CGA POSITION STATEMENT ON THE PROTECTION OF CRYOGENIC STORAGE TANKS FROM OVERPRESSURE DURING OPERATOR-ATTENDED REFILL
ISO 21013-2:2007 Cryogenic vessels Pressure-relief accessories for cryogenic service Part 2: Non-reclosable pressure-relief devices
EN ISO 16924:2018 Natural gas fuelling stations - LNG stations for fuelling vehicles (ISO 16924:2016)
CSA HPIT 2-2017 Dispensing systems and components for fueling hydrogen powered industrial trucks
Z276-18 Liquefied natural gas (LNG) - Production, storage, and handling
CGA P 8.9 : 2013 BULK LIQUID OXYGEN, NITROGEN, AND ARGON STORAGE SYSTEMS AT PRODUCTION SITES
UNE-EN ISO 21013-3:2016 Cryogenic vessels - Pressure-relief accessories for cryogenic service - Part 3: Sizing and capacity determination (ISO 21013-3:2016)
CGA M 1 : 2018 STANDARD FOR MEDICAL GAS SUPPLY SYSTEMS AT HEALTH CARE FACILITIES
CGA SB 45 : 2011 PROPER HANDLING OF INSULATED TANKS THAT ARE IN OBVIOUS SIGNS OF LOSS OF VACUUM
NFPA 400 : 2016 HAZARDOUS MATERIALS CODE
BS EN 13648-3:2002 Cryogenic vessels. Safety devices for protection against excessive pressure Determination of required discharge. Capacity and sizing
BS ISO 21013-2 : 2007 CRYOGENIC VESSELS - PRESSURE-RELIEF ACCESSORIES FOR CRYOGENIC SERVICE - PART 2: NON-RECLOSABLE PRESSURE-RELIEF DEVICES
I.S. EN 13648-3:2002 CRYOGENIC VESSELS - SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 3: DETERMINATION OF REQUIRED DISCHARGE - CAPACITY AND SIZING
CGA G 6.1 : 2013 STANDARD FOR INSULATED CARBON DIOXIDE SYSTEMS AT CONSUMER SITES
BS ISO 21013-3:2006 Cryogenic vessels. Pressure-relief accessories for cryogenic service Sizing and capacity determination
BS EN ISO 16924:2018 Natural gas fuelling stations. LNG stations for fuelling vehicles
CGA P 75 : 2018 STANDARD FOR PROPER HANDLING OF INSULATED TANKS THAT ARE IN OBVIOUS SIGNS OF LOSS OF VACUUM
NFPA 59A : 2016 PRODUCTION, STORAGE, AND HANDLING OF LIQUEFIED NATURAL GAS (LNG)
NFPA 2 : 2016 HYDROGEN TECHNOLOGIES CODE
NFPA 52 : 2016 VEHICULAR NATURAL GAS FUEL SYSTEMS CODE
NFPA 58 : 2017 LIQUEFIED PETROLEUM GAS CODE
NFPA 1 : 2021 FIRE CODE
I.S. EN ISO 21013-3:2016 CRYOGENIC VESSELS - PRESSURE-RELIEF ACCESSORIES FOR CRYOGENIC SERVICE - PART 3: SIZING AND CAPACITY DETERMINATION (ISO 21013-3:2016)
BS ISO 16924 : 2016 NATURAL GAS FUELLING STATIONS - LNG STATIONS FOR FUELLING VEHICLES
NFPA 57 : 2002 LIQUEFIED NATURAL GAS (LNG) VEHICULAR FUEL SYSTEMS CODE
NFPA 53 : 2016 MATERIALS, EQUIPMENT, AND SYSTEMS USED IN OXYGEN-ENRICHED ATMOSPHERES
CGA P 66 : 2015 GUIDELINE FOR THE SELECTION OF PRESSURE RELIEF DEVICES AND VALVE OUTLETS FOR UN MARKED CYLINDERS
CGA S 1.1 : 2011 PRESSURE RELIEF DEVICE STANDARDS - PART 1: CYLINDERS FOR COMPRESSED GASES
NFPA 55 : 2016 COMPRESSED GASES AND CRYOGENIC FLUIDS CODE
ICC 2012 INTERNATIONAL FIRE CODE : 2012 INTERNATIONAL FIRE CODE
ICC IFGC CODE AND COMMENTARY : 2015 IFGC® Code and Commentary
ICC IFC CODE & COMMENTARY VOLUME 1 & 2 : 2015 IFC® Code and Commentary
ICC 2012 INTERNATIONAL FUEL GAS CODE : 2012 INTERNATIONAL FUEL GAS CODE
NFPA 50B : 1999 LIQUEFIED HYDROGEN SYSTEMS AT CONSUMER SITES
CGA P 12 : 2017 SAFE HANDLING OF CRYOGENIC LIQUIDS
CGA PS 33 : 2008(R2014) CGA POSITION STATEMENT ON USE OF LPG OR PROPANE TANK AS COMPRESSED HYDROGEN STORAGE
NFPA 50 : 2001 BULK OXYGEN SYSTEMS AT CONSUMER SITES
SAE J 2343 : 2018 RECOMMENDED PRACTICE FOR LNG MEDIUM AND HEAVY-DUTY POWERED VEHICLES
I.S. EN ISO 16924:2018 NATURAL GAS FUELLING STATIONS - LNG STATIONS FOR FUELLING VEHICLES (ISO 16924:2016)
ISO 21013-3:2016 Cryogenic vessels Pressure-relief accessories for cryogenic service Part 3: Sizing and capacity determination
EN 13648-3:2002 Cryogenic vessels - Safety devices for protection against excessive pressure - Part 3: Determination of required discharge - Capacity and sizing
EN ISO 21013-3:2016 Cryogenic vessels - Pressure-relief accessories for cryogenic service - Part 3: Sizing and capacity determination (ISO 21013-3:2016)
CGA S 1.2 : 2009 PRESSURE RELIEF DEVICE STANDARDS - PART 2: PORTABLE CONTAINERS FOR COMPRESSED GASES
ISO 16924:2016 Natural gas fuelling stations — LNG stations for fuelling vehicles
CGA C 14 : 2005(R2010) PROCEDURES FOR FIRE TESTING OF DOT CYLINDER PRESSURE RELIEF DEVICE SYSTEMS
BS EN ISO 21013-3:2016 Cryogenic vessels. Pressure-relief accessories for cryogenic service Sizing and capacity determination
CGA PS 17 : SEP 2004 CGA POSITION STATEMENT ON UNDERGROUND INSTALLATION OF LIQUID HYDROGEN STORAGE TANKS
SAE J 2406 : 2018 RECOMMENDED PRACTICES FOR CNG POWERED MEDIUM AND HEAVY-DUTY TRUCKS
CGA 341 : 2017 SPECIFICATION FOR INSULATED CARGO TANK FOR NONFLAMMABLE CRYOGENIC LIQUIDS
CGA P 8 : 2013 SAFE PRACTICES GUIDE FOR CRYOGENIC AIR SEPARATION PLANTS
CGA V 1 : 2013 STANDARD FOR COMPRESSED GAS CYLINDER VALVE OUTLET AND INLET CONNECTIONS
NFPA 1 : 2018 FIRE CODE

CGA C 14 : 2005(R2010) PROCEDURES FOR FIRE TESTING OF DOT CYLINDER PRESSURE RELIEF DEVICE SYSTEMS
CGA V 1 : 2013 STANDARD FOR COMPRESSED GAS CYLINDER VALVE OUTLET AND INLET CONNECTIONS
CGA P 8 : 2013 SAFE PRACTICES GUIDE FOR CRYOGENIC AIR SEPARATION PLANTS
CGA S 1.2 : 2009 PRESSURE RELIEF DEVICE STANDARDS - PART 2: PORTABLE CONTAINERS FOR COMPRESSED GASES
CGA S 1.1 : 2011 PRESSURE RELIEF DEVICE STANDARDS - PART 1: CYLINDERS FOR COMPRESSED GASES

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.