DIN EN ISO 9000:2015-11
Current
The latest, up-to-date edition.
Hardcopy , PDF
German - English
11-01-2015
Nationales Vorwort
Nationaler Anhang NA (informativ) - Literaturhinweise
Europäisches Vorwort
Vorwort
Einleitung
1 Anwendungsbereich
2 Grundlegende Konzepte und
Grundsätze des Qualitätsmanagements
3 Begriffe
Anhang A (informativ) - Begriffsbeziehungen und ihre
graphische Darstellung
Literaturhinweise
Stichwortverzeichnis
This International Standard describes the basic concepts and principles of quality management that are generally applicable to the following: - Organizations that strive for sustainable success through the implementation of a quality management system; - Customers seeking confidence in an organization's ability to consistently provide products and services that meet their needs; - Organizations that want to build confidence in their supply chain that product and service requirements are met; - Organizations and interested parties who strive to improve communication through a general understanding of the terms used in quality management; - Organizations that carry out conformity assessments according to the requirements of ISO 9001; - Providers of training, reviews or advice on quality management; - Developer of related standards.
DevelopmentNote |
Supersedes DIN EN ISO 8402 and DIN EN ISO 8402 E (01/2002)
|
DocumentType |
Standard
|
Pages |
104
|
PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
Status |
Current
|
Supersedes |
Standards | Relationship |
SN EN ISO 9000 : 2015 | Identical |
NBN EN ISO 9000 : 2015 | Identical |
BS EN ISO 9000:2015 | Identical |
ISO 9000:2015 | Identical |
UNI EN ISO 9000 : 2005 | Identical |
EN ISO 9000:2015 | Identical |
NEN EN ISO 9000 : 2015 | Identical |
UNE-EN ISO 9000:2015 | Identical |
NS EN ISO 9000 : 2000 | Identical |
I.S. EN ISO 9000:2015 | Identical |
DIN EN ISO 9241-210 : 2011-01 | ERGONOMICS OF HUMAN-SYSTEM INTERACTION - PART 210: HUMAN-CENTRED DESIGN FOR INTERACTIVE SYSTEMS |
DIN EN ISO 9241-420:2011-10 | Ergonomics of human-system interaction - Part 420: Selection of physical input devices (ISO 9241-420:2011) |
VDE 0674-1 : 2001-12 | TESTS ON INDOOR AND OUTDOOR POST INSULATORS OF CERAMIC MATERIAL OR GLASS FOR SYSTEMS WITH NOMINAL VOLTAGES GREATER THAN 1 KV |
DIN ISO 29990:2010-12 | Learning services for non-formal education and training - Basic requirements for service providers (ISO 29990:2010) |
DIN ISO 22006:2012-02 | Quality management systems - Guidelines for the application of ISO 9001:2008 to crop production (ISO 22006:2009) |
DIN EN ISO 16559 E : 2014 | SOLID BIOFUELS - TERMINOLOGY, DEFINITIONS AND DESCRIPTIONS (ISO 16559:2014) |
DIN 69904:2000-11 | PROJECT BUSINESS - PROJECT MANAGEMENT SYSTEMS - ELEMENTS AND STRUCTURES |
DIN 45673-1:2010-08 | Mechanical vibration - Resilient elements used in railway tracks - Part 1: Terms and definitions, classification, test procedures |
DIN 7865-2 E : 2015 | ELASTOMERIC-WATERSTOPS FOR SEALING JOINTS IN CONCRETE - PART 2: MATERIAL SPECIFICATIONS AND TESTING |
DIN ISO 5725-6:2002-08 | ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS - PART 6: USE IN PRACTICE OF ACCURACY VALUES |
DIN EN 16311:2013-05 | ENGINEERING SERVICES - TERMINOLOGY TO DESCRIBE ENGINEERING SERVICES FOR INDUSTRIAL PRODUCTS |
DIN EN ISO/IEC 80079-34:2012-03 | EXPLOSIVE ATMOSPHERES - PART 34: APPLICATION OF QUALITY SYSTEMS FOR EQUIPMENT MANUFACTURE (ISO/IEC 80079-34:2011) |
DIN EN ISO 11135:2014-10 | STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES (ISO 11135:2014) |
DIN ISO 22935-1:2012-12 | Milk and milk products - Sensory analysis - Part 1: General guidance for the recruitment, selection, training and monitoring of assessors (ISO 22935-1:2009) |
DIN 2304-1:2016-03 | ADHESIVE BONDING TECHNOLOGY - QUALITY REQUIREMENTS FOR ADHESIVE BONDING PROCESSES - PART 1: ADHESIVE BONDING PROCESS CHAIN |
DIN EN ISO 50001 E : 2011 | ENERGY MANAGEMENT SYSTEMS - REQUIREMENTS WITH GUIDANCE FOR USE (ISO 50001:2011) |
DIN EN ISO 22000:2005-11 | FOOD SAFETY MANAGEMENT SYSTEMS - REQUIREMENTS FOR ANY ORGANIZATION IN THE FOOD CHAIN |
DIN 7865-2:2015-02 | ELASTOMERIC-WATERSTOPS FOR SEALING JOINTS IN CONCRETE - PART 2: MATERIAL SPECIFICATIONS AND TESTING |
DIN EN 15224:2017-05 | QUALITY MANAGEMENT SYSTEMS - EN ISO 9001:2015 FOR HEALTHCARE |
VDI/VDE 2180 Blatt 6:2013-06 | Safeguarding of industrial process plants by means of process control engineering (PCE) - Application of functional safety in the context of explosion protection |
VDI/VDE 2660 Blatt 1:2010-07 | Experimental stress analysis - Optical strain sensor based on fibre Bragg grating - Fundamentals, characteristics and sensor testing |
VDI 6009 Blatt 2:2003-12 | Facility Management - Introduction of building management in several properties - Examples |
DKD-R 6-2-1 : 2002 | |
DIN ISO 13065 E : 2017 | SUSTAINABILITY CRITERIA FOR BIOENERGY (ISO 13065:2015) |
DIN EN ISO 11608-5:2013-01 | Needle-based injection systems for medical use - Requirements and test methods - Part 5: Automated functions (ISO 11608-5:2012) |
DIN EN ISO 13408-4:2011-09 | Aseptic processing of health care products - Part 4: Clean-in-place technologies (ISO 13408-4:2005) |
DIN ISO 3534-2:2013-12 | STATISTICS - VOCABULARY AND SYMBOLS - PART 2: APPLIED STATISTICS (ISO 3534-2:2006) |
DIN ISO/IEC 27000:2015-12 (Draft) | INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - INFORMATION SECURITY MANAGEMENT SYSTEMS - OVERVIEW AND VOCABULARY |
DIN ISO 5725-5:2002-11 | ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS - PART 5: ALTERNATIVE METHODS FOR THE DETERMINATION OF THE PRECISION OF A STANDARD MEASUREMENT METHOD |
DIN EN ISO 25378:2011-12 | Geometrical product specifications (GPS) - Characteristics and conditions - Definitions (ISO 25378:2011) |
DIN 55350-11:2008-05 | Concepts for quality management - Part 11: Supplement to DIN EN ISO 9000:2005 |
DIN EN ISO 13408-1:2015-12 | ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 1: GENERAL REQUIREMENTS (ISO 13408-1:2008, INCLUDING AMD 1:2013) |
DIN EN ISO 17100:2016-05 | TRANSLATION SERVICES - REQUIREMENTS FOR TRANSLATION SERVICES (ISO 17100:2015/AMD.1:2017) |
DIN ISO 5725-2:2002-12 | Accuracy (trueness and precision) of measurement methods and results - Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method (ISO 5725-2:1994 including Technical Corrigendum 1:2002) |
DIN 69901-1:2009-01 | PROJECT MANAGEMENT - PROJECT MANAGEMENT SYSTEMS - PART 1: FUNDAMENTALS |
DIN EN ISO 14253-1:2013-12 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 1: DECISION RULES FOR PROVING CONFORMITY OR NONCONFORMITY WITH SPECIFICATIONS (ISO 14253-1:2013) |
DIN EN ISO 4074:2016-05 | NATURAL RUBBER LATEX MALE CONDOMS - REQUIREMENTS AND TEST METHODS (ISO 4074:2015) |
DIN EN ISO 14971:2013-04 | MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES (ISO 14971:2007) |
DIN ISO 10381-5:2007-02 | SOIL QUALITY - SAMPLING - PART 5: GUIDANCE ON THE PROCEDURE FOR THE INVESTIGATION OF URBAN AND INDUSTRIAL SITES WITH REGARD TO SOIL CONTAMINATION |
DIN EN ISO 9241-210:2011-01 | ERGONOMICS OF HUMAN-SYSTEM INTERACTION - PART 210: HUMAN-CENTRED DESIGN FOR INTERACTIVE SYSTEMS |
DIN ISO 19258:2006-05 | SOIL QUALITY - GUIDANCE ON THE DETERMINATION OF BACKGROUND VALUES |
VDI/VDE 2617 Blatt 10:2011-01 | Accuracy of coordinate measuring machines - Characteristics and their checking - Acceptance and reverification tests of lasertrackers |
VDI/VDE 3699 Blatt 5:2014-09 | Process control using display screens - Alarms/messages |
VDI 2219:2016-09 | Information technology in product development - Introduction and usage of PDM systems |
VDI 4066 Blatt 4:2016-04 | Hygiene requirements for the production and filling of dairy products without recontamination |
VDI 4500 Blatt 4:2011-12 | Technical documentation - Documentation process - Planning, layout, creation |
VDI 2260:2003-10 | Technical warranty for gas cleaning equipment - Particulate and gaseous matter |
VDI 4800 Blatt 1:2016-02 | Resource efficiency - Methodological principles and strategies |
VDI/VDE 3511 Blatt 4.4:2005-07 | Temperature measurement in industry - Radiation thermometry - Calibration of radiation thermometers |
VDI/VDE 2600 Blatt 1:2013-10 | Inspection process management - Identification, classification and proof of suitability for inspection processes |
VDI/VDE 2862 Blatt 2:2015-02 | Minimum requirements for application of fastening systems and tools - Applications in plant construction, mechanical engineering, equipment manufacturing and for flange connections in components under pressure boundary |
VDI/VDE 2634 Blatt 2:2012-08 | Optical 3-D measuring systems - Optical systems based on area scanning |
VDI/VDE 3682 Blatt 1:2015-05 | Formalised process descriptions - Concept and graphic representation |
VDI/VDE 5570 Blatt 2:2006-03 | Testing of connectorised and non-connectorised polymer optical fibres - Testing of optical parameters |
VDI 4510:2006-05 | Engineering services and requirements to engineering service providers |
VDI 2700 Blatt 5:2011-12 | Securing of loads on road vehicles - Quality management systems |
VDI 4060 Blatt 2:2005-06 | Integrated Management Systems - Guidance for practical implementation - Case studies |
VDI 3986:2014-07 | Determination of efficiencies of conventional power stations |
VDI/VDE 2862 Blatt 1:2012-04 | Minimum restrictions for application of fastening systems and tools - Applications in the automotive industry |
VDI 3786 Blatt 1:2013-08 | Environmental meteorology - Meteorological measurements - Fundamentals |
VDI 4066 Blatt 1:2013-05 | Hygienic requirements for the production and aseptically filling of beverage products - Principles and design criteria |
VDI 3892:2015-03 | Emission control - Roasted-coffee-producing industry - Plants with a minimum daily output of at least 0,5 tonnes |
VDI 4003:2007-03 | Reliability management |
VDI 2870 Blatt 2:2013-02 | Lean production systems - List of methods |
VDI 4501 Blatt 2:2008-12 | Occupational field Technical Sales - Curriculum and study content for the qualification of sales engineers |
VDI 5600 Blatt 1:2016-10 | Manufacturing execution systems (MES) |
VDI 4084:2017-09 (Draft) | Corrective maintenance and remanufacturing of internal combustion engines - Terminology and processes |
VDI 5600 Blatt 3:2013-07 | Manufacturing Execution Systems (MES) - Logic interfaces for machine and plant control |
VDI/VDE 3516 Blatt 1:1978-10 | Process analytical equipment |
VDI 2209:2009-03 | 3D product modelling - Technical and organizational requirements - Procedures, tools, and applications - Cost-effective practical use |
VDI 2870 Blatt 1:2012-07 | Lean production systems - Basic principles, introduction, and review |
VDI 4060 Blatt 1:2005-06 | Integrated Management Systems - Guidance for practical implementation - General information |
VDI 3894 Blatt 1:2011-09 | Emissions and immissions from animal husbandry - Housing systems and emissions - Pigs, cattle, poultry, horses |
VDI 4256 Blatt 1:2010-10 | Bioaerosols and biological agents - Determination of performance characteristics - Culture-based counting methods |
VDI 3431:2016-08 | Bending of profiles - Testing notes for profile bending elements |
VDI 2223:2004-01 | Systematic embodiment design of technical products |
VDI/VDE 2645 Blatt 2:2014-09 | Capability test for fastening technology - Machine capability test - MCT |
VDI/VDE 3528 Blatt 1:2017-06 | Requirements of commercial grade products and criteria for their use in the instrumentation and control systems important to safety in nuclear power plants - General part |
VDI 2887:1998-03 (Draft) | Quality management of maintenance |
VDI/VDE 2634 Blatt 3:2008-12 | Optical 3D-measuring systems - Multiple view systems based on area scanning |
VDI/VDE/DGQ/DKD 2622 Blatt 1:2014-06 | Calibration of measuring equipment for electrical quantities - Fundamentals |
VDI 2083 Blatt 7:2015-10 | Cleanroom technology - Ultrapure media - Quality, supply, distribution |
DIN ISO 5725-3:2003-02 | ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS - PART 3: INTERMEDIATE MEASURES OF THE PRECISION OF A STANDARD MEASUREMENT METHOD |
DIN 69901-5:2009-01 | PROJECT MANAGEMENT - PROJECT MANAGEMENT SYSTEMS - PART 5: CONCEPTS |
KTA 3507 : 2014(R2017) | FACTORY TESTS, POST-REPAIR TESTS AND CERTIFICATION OF SATISFACTORY PERFORMANCE IN SERVICE OF MODULES AND DEVICES FOR THE INSTRUMENTATION AND CONTROLS OF THE SAFETY SYSTEM |
VDE 0557-6 : 2001 | LOW-VOLTAGE POWER SUPPLIES, DC OUTPUT - PART 6: REQUIREMENTS FOR LOW-VOLTAGE POWER SUPPLIES OF ASSESSED PERFORMANCE |
DIN EN ISO 17100:2016-05 | TRANSLATION SERVICES - REQUIREMENTS FOR TRANSLATION SERVICES (ISO 17100:2015/AMD.1:2017) |
DIN ISO 13065:2017-06 | SUSTAINABILITY CRITERIA FOR BIOENERGY (ISO 13065:2015) |
DIN EN 60168 : 2001-12 | TESTS ON INDOOR AND OUTDOOR POST INSULATORS OF CERAMIC MATERIAL OR GLASS FOR SYSTEMS WITH NOMINAL VOLTAGES GREATER THAN 1 KV |
DIN EN ISO 13408-5:2011-09 | Aseptic processing of health care products - Part 5: Sterilization in place (ISO 13408-5:2006) |
DIN EN ISO 16559:2014-12 | Solid biofuels - Terminology, definitions and descriptions (ISO 16559:2014) |
DIN HDBK 223 : 6ED 2016 | |
DIN EN ISO 22005:2007-10 | TRACEABILITY IN THE FEED AND FOOD CHAIN - GENERAL PRINCIPLES AND BASIC REQUIREMENTS FOR SYSTEM DESIGN AND IMPLEMENTATION |
DIN EN ISO 17662:2016-09 | WELDING - CALIBRATION, VERIFICATION AND VALIDATION OF EQUIPMENT USED FOR WELDING, INCLUDING ANCILLARY ACTIVITIES (ISO 17662:2016) |
DIN EN ISO 11608-3 E : 2013 | NEEDLE-BASED INJECTION SYSTEMS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS - PART 3: FINISHED CONTAINERS (ISO 11608-3:2012) |
DIN EN ISO 15189:2014-11 | Medical laboratories - Requirements for quality and competence (ISO 15189:2012, Corrected version 2014-08-15) |
DIN EN ISO 11608-1:2015-04 | Needle-based injection systems for medical use - Requirements and test methods - Part 1: Needle-based injection systems (ISO 11608-1:2014) |
DIN 18200:2000-05 | ASSESSMENT OF CONFORMITY FOR CONSTRUCTION PRODUCTS - CERTIFICATION OF CONSTRUCTION PRODUCTS BY CERTIFICATION BODY |
DIN 6789-100:1997-06 (Draft) | SYSTEMATIC ARRANGEMENT OF DOCUMENTS - PART 100: BASIC CONVENTIONS FOR CALS |
DIN EN ISO 20857 E : 2013 | STERILIZATION OF HEALTH CARE PRODUCTS - DRY HEAT - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES (ISO 20857:2010) |
DIN EN ISO 19258:2016-05 (Draft) | SOIL QUALITY - GUIDANCE ON THE DETERMINATION OF BACKGROUND VALUES |
DIN ISO 18436-3:2013-05 | CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - REQUIREMENTS FOR QUALIFICATION AND ASSESSMENT OF PERSONNEL - PART 3: REQUIREMENTS FOR TRAINING BODIES AND THE TRAINING PROCESS (ISO 18436-3:2012) |
DKD-R 4-3-1 : 1999 | CALIBRATION OF MEASURING AND TEST EQUIPMENT FOR GEOMETRICAL MEASURANDS - SHEET 1: FUNDAMENTALS |
VDE 0670-811:1997-05 | GAS-FILLED COMPARTMENTS FOR A.C. SWITCHGEAR AND CONTROLGEAR FOR RATED VOLTAGES ABOVE 1KV AND UP TO AND INCLUDING 52 KV |
DIN EN ISO 11240:2013-03 | Health informatics - Identification of medicinal products - Data elements and structures for the unique identification and exchange of units of measurement (ISO 11240:2012) |
DIN EN ISO 20857:2013-08 | Sterilization of health care products - Dry heat - Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 20857:2010) |
DIN EN ISO 11737-1:2009-09 | STERILIZATION OF MEDICAL DEVICES - MICROBIOLOGICAL METHODS - PART 1: DETERMINATION OF A POPULATION OF MICROORGANISMS ON PRODUCTS |
VDA 4959 : 2015 | RECOMMENDATION FOR SCHEDULE MANAGEMENT - REQUIREMENTS RELATING TO A SCHEDULE MANAGEMENT TOOL FOR THE AUTOMOTIVE INDUSTRY |
DIN 6779-10:2007-04 | STRUCTURING PRINCIPLES FOR TECHNICAL PRODUCTS AND TECHNICAL PRODUCT DOCUMENTATION - PART 10: POWER PLANTS |
DIN EN ISO 14044:2006-10 | ENVIRONMENTAL MANAGEMENT - LIFE CYCLE ASSESSMENT - REQUIREMENTS AND GUIDELINES (ISO 14044:2006) |
DIN EN ISO 11608-1 E : 2015 | NEEDLE-BASED INJECTION SYSTEMS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS - PART 1: NEEDLE-BASED INJECTION SYSTEMS (ISO 11608-1:2014) |
DIN EN ISO 14161:2010-03 | STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL INDICATORS - GUIDANCE FOR THE SELECTION, USE AND INTERPRETATION OF RESULTS |
DIN EN ISO 14040:2009-11 | Environmental management - Life cycle assessment - Principles and framework (ISO 14040:2006); German and English version EN ISO 14040:2006 |
DIN EN ISO 11608-2 E : 2012 | NEEDLE-BASED INJECTION SYSTEMS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS - PART 2: NEEDLES (ISO 11608-2:2012) |
DIN EN ISO 16426:2003-06 | FASTENERS - QUALITY ASSURANCE SYSTEM |
DIN EN ISO 13485:2016-08 | Medical devices - Quality management systems - Requirements for regulatory purposes (ISO 13485:2016) |
DIN EN ISO 11608-2:2012-12 | Needle-based injection systems for medical use - Requirements and test methods - Part 2: Needles (ISO 11608-2:2012) |
DIN ISO 26000:2011-01 | Guidance on social responsibility (ISO 26000:2010) |
DIN EN 15224:2016-04 (Draft) | QUALITY MANAGEMENT SYSTEMS - EN ISO 9001:2015 FOR HEALTHCARE |
DIN EN ISO 13408-3:2011-09 | Aseptic processing of health care products - Part 3: Lyophilization (ISO 13408-3:2006) |
DIN HDBK 226 : 9ED 2016 | |
DIN EN ISO 12696:2016-07 (Draft) | CATHODIC PROTECTION OF STEEL IN CONCRETE (ISO 12696:2016) |
DIN EN ISO 50001:2011-12 | ENERGY MANAGEMENT SYSTEMS - REQUIREMENTS WITH GUIDANCE FOR USE (ISO 50001:2011) |
DIN EN ISO 9004:2009-12 | MANAGING FOR THE SUSTAINED SUCCESS OF AN ORGANIZATION - A QUALITY MANAGEMENT APPROACH |
DIN EN ISO 9001:2015-11 | QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS (ISO 9001:2015) |
DIN EN ISO 15883-1:2014-10 | WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS (ISO 15883-1:2006 + AMD 1:2014) |
DIN EN ISO 11137-1:2015-11 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 1: REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES (ISO 11137-1:2006, INCLUDING AMD 1:2013) |
DIN EN ISO 16106:2006-06 | PACKAGING - TRANSPORT PACKAGES FOR DANGEROUS GOODS - DANGEROUS GOODS PACKAGINGS, INTERMEDIATE BULK CONTAINERS (IBCS) AND LARGE PACKAGINGS - GUIDELINES FOR THE APPLICATION OF ISO 9001 |
DIN EN ISO 11737-2:2010-04 | STERILIZATION OF MEDICAL DEVICES - MICROBIOLOGICAL METHODS - PART 2: TESTS OF STERILITY PERFORMED IN THE DEFINITION, VALIDATION AND MAINTENANCE OF A STERILIZATION PROCESS |
DIN EN ISO 11608-3:2013-01 | Needle-based injection systems for medical use - Requirements and test methods - Part 3: Finished containers (ISO 11608-3:2012) |
DIN EN ISO 19258:2011-09 | SOIL QUALITY - GUIDANCE ON THE DETERMINATION OF BACKGROUND VALUES (ISO 19258:2005) |
DIN EN ISO 14937:2010-03 | Sterilization of health care products - General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices (ISO 14937:2009) |
ISO 10001:2007 | Quality management Customer satisfaction Guidelines for codes of conduct for organizations |
ISO/IEC 17000:2004 | Conformity assessment Vocabulary and general principles |
ISO 19011:2011 | Guidelines for auditing management systems |
ISO 1087-1:2000 | Terminology work Vocabulary Part 1: Theory and application |
ISO 10015:1999 | Quality management Guidelines for training |
ISO/IEC 27001:2013 | Information technology — Security techniques — Information security management systems — Requirements |
ISO/TR 10017:2003 | Guidance on statistical techniques for ISO 9001:2000 |
DIN EN 45020:2007-03 | STANDARDIZATION AND RELATED ACTIVITIES - GENERAL VOCABULARY |
DIN EN ISO 50001:2011-12 | ENERGY MANAGEMENT SYSTEMS - REQUIREMENTS WITH GUIDANCE FOR USE (ISO 50001:2011) |
DIN EN ISO 19011:2011-12 | GUIDELINES FOR AUDITING MANAGEMENT SYSTEMS (ISO 19011:2011) |
ISO 31000:2009 | Risk management Principles and guidelines |
DIN ISO 10007:2004-12 | QUALITY MANAGEMENT SYSTEMS - GUIDELINES FOR CONFIGURATION MANAGEMENT |
ISO/TS 16949:2009 | Quality management systems Particular requirements for the application of ISO 9001:2008 for automotive production and relevant service part organizations |
DIN ISO 10001:2008-07 | QUALITY MANAGEMENT - CUSTOMER SATISFACTION - GUIDELINES FOR CODES OF CONDUCT FOR ORGANIZATIONS |
DIN EN ISO 14001:2015-11 | ENVIRONMENTAL MANAGEMENT SYSTEMS - REQUIREMENTS WITH GUIDANCE FOR USE (ISO 14001:2015) |
ISO 10019:2005 | Guidelines for the selection of quality management system consultants and use of their services |
ISO 10241-2:2012 | Terminological entries in standards — Part 2: Adoption of standardized terminological entries |
ISO 10004:2012 | Quality management Customer satisfaction Guidelines for monitoring and measuring |
ISO 10014:2006 | Quality management Guidelines for realizing financial and economic benefits |
ISO 50001:2011 | Energy management systems Requirements with guidance for use |
ISO 10005:2005 | Quality management systems Guidelines for quality plans |
ISO 10008:2013 | Quality management — Customer satisfaction — Guidelines for business-to-consumer electronic commerce transactions |
ISO 10003:2007 | Quality management Customer satisfaction Guidelines for dispute resolution external to organizations |
ISO 10006:2003 | Quality management systems Guidelines for quality management in projects |
DIN-Fachbericht ISO 10006:2004 | QUALITAETSMANAGEMENTSYSTEME - LEITFADEN FUER QUALITAETSMANAGEMENT IN PROJEKTEN |
ISO/IEC Guide 99:2007 | International vocabulary of metrology Basic and general concepts and associated terms (VIM) |
DIN ISO/IEC 27001 : 2017 | INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - INFORMATION SECURITY MANAGEMENT SYSTEMS - REQUIREMENTS (ISO/IEC 27001:2013 + COR. 1:2014) |
ISO 10018:2012 | Quality management Guidelines on people involvement and competence |
ISO 3534-2:2006 | Statistics Vocabulary and symbols Part 2: Applied statistics |
ISO 10002:2014 | Quality management Customer satisfaction Guidelines for complaints handling in organizations |
DIN ISO/TS 16949 : 2009 | QUALITY MANAGEMENT SYSTEMS - PARTICULAR REQUIREMENTS FOR THE APPLICATION OF ISO 9001:2008 FOR AUTOMOTIVE PRODUCTION AND RELEVANT SERVICE PART ORGANIZATIONS |
ISO 9004:2009 | Managing for the sustained success of an organization A quality management approach |
ISO/TR 10013:2001 | Guidelines for quality management system documentation |
ISO 14001:2015 | Environmental management systems — Requirements with guidance for use |
DIN ISO 10003:2008-07 | QUALITY MANAGEMENT - CUSTOMER SATISFACTION - GUIDELINES FOR DISPUTE RESOLUTION EXTERNAL TO ORGANIZATIONS |
ISO 10012:2003 | Measurement management systems — Requirements for measurement processes and measuring equipment |
ISO 9001:2015 | Quality management systems — Requirements |
DIN ISO 10008:2015-01 | Quality management - Customer satisfaction - Guidelines for business-to-consumer electronic commerce transactions (ISO 10008:2013); Text in German, English and French |
DIN EN ISO 9001:2015-11 | QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS (ISO 9001:2015) |
DIN EN ISO/IEC 17000:2005-03 | CONFORMITY ASSESSMENT - VOCABULARY AND GENERAL PRINCIPLES |
ISO/IEC Guide 2:2004 | Standardization and related activities General vocabulary |
ISO 10241-1:2011 | Terminological entries in standards — Part 1: General requirements and examples of presentation |
ISO 704:2009 | Terminology work — Principles and methods |
DIN ISO 3534-2:2013-12 | STATISTICS - VOCABULARY AND SYMBOLS - PART 2: APPLIED STATISTICS (ISO 3534-2:2006) |
ISO 10007:2017 | Quality management — Guidelines for configuration management |
ISO Guide 73:2009 | Risk management — Vocabulary |
DIN ISO 10004:2015-01 | QUALITY MANAGEMENT - CUSTOMER SATISFACTION - GUIDELINES FOR MONITORING AND MEASURING (ISO 10004:2012) |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.