• There are no items in your cart

IEEE C37.100.1-2007

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

IEEE Standard of Common Requirements for High Voltage Power Switchgear Rated Above 1000 V
Available format(s)

PDF

Superseded date

08-26-2019

Language(s)

English

Published date

10-12-2007

1 Overview
  1.1 Scope
  1.2 Normative references
2 Normal (usual) and special (unusual) service conditions
  2.1 Normal (usual) service conditions
  2.2 Special (unusual) service conditions for both indoor
  2.3 and outdoor switchgear
3 Definitions
4 Ratings
  4.1 Rated maximum voltage (V) or (U[r])
  4.2 Rated insulation level, U[d], U[s], U[p]
  4.3 Rated power frequency (f[r])
  4.4 Rated continuous (normal) current and temperature rise
  4.5 Rated short-time withstand current (I[k])
  4.6 Rated peak withstand current (I[p])
  4.7 Rated duration of short-circuit (t[k])
  4.8 Rated supply voltage of closing and opening devices and
       of auxiliary and control circuits (U[a])
  4.9 Rated supply frequency of closing and opening devices and
       of auxiliary circuits
  4.10 Rated pressure of compressed gas supply for insulation
       and/or operation
  4.11 Rated filling levels for insulation and/or operation
5 Design and construction
  5.1 Requirements for liquids in switchgear
  5.2 Requirements for gases in switchgear
  5.3 Grounding of switchgear
  5.4 Auxiliary and control equipment
  5.5 Dependent power operation
  5.6 Stored energy operation
  5.7 Independent manual operation
  5.8 Operation of releases
  5.9 Low- and high-pressure interlocking and monitoring devices
  5.10 Nameplates
  5.11 Interlocking
  5.12 Position indication
  5.13 Degrees of protection by enclosures
  5.14 Creepage distances for outdoor insulators
  5.15 Gas and vacuum tightness
  5.16 Liquid tightness
  5.17 Flammability
  5.18 Electromagnetic compatibility (EMC)
  5.19 X-ray emission
6 Design (type) tests
  6.1 Grouping of tests
  6.2 Dielectric tests
  6.3 Radio influence voltage (RIV) test
  6.4 Measurement of the resistance of circuits
  6.5 Temperature-rise tests
  6.6 Short-time withstand current and peak withstand current tests
  6.7 Verification of the degrees of protection provided by
       enclosures
  6.8 Tightness tests
  6.9 Electromagnetic compatibility tests
  6.10 Additional tests on auxiliary and control circuits
  6.11 X-radiation procedure for vacuum interrupters
7 Routine (production) tests
  7.1 Dielectric test on the main circuit
  7.2 Dielectric test on auxiliary and control circuits
  7.3 Measurement of the resistance of the main circuit
  7.4 Tightness test
  7.5 Design and visual checks
Annex A (informative) Recommendations for application of this
        standard to relevant switchgear standards
Annex B (normative) Altitude correction factors
Annex C (normative) Exposure to pollution
Annex D (normative) Identification of test specimens
Annex E (normative) Determination of the equivalent rms value
        of a short-time current during a short circuit of a given
Annex F (normative) Method for the weatherproofing test for
        outdoor switchgear
Annex G (informative) Tightness (information, example, and
        guidance)
Annex H (informative) Symbols and related terminology
Annex I (informative) Proposed values of rated maximum
        voltage for future design
Annex J (informative) Notes on the development of
        IEEE Std C37.100.1-2007
Annex K (informative) Bibliography

Pertains to alternating current (ac) switchgear, designed for both indoor and outdoor installation and for operation at service frequencies up to and including 60 Hz on systems having voltages above 1000 V.

Committee
Switchgear
DevelopmentNote
Supersedes IEEE DRAFT C37.100.1. (10/2007)
DocumentType
Standard
Pages
84
PublisherName
Institute of Electrical & Electronics Engineers
Status
Superseded
SupersededBy
Supersedes

16/30337938 DC : 0 BS EN 80005-1 - UTILITY CONNECTIONS IN PORT - HIGH VOLTAGE SHORE CONNECTION (HVSC) SYSTEMS - PART 1: GENERAL REQUIREMENTS
IEEE C37.017-2010 IEEE Standard for Bushings for High-Voltage [over 1000 V (ac)] Circuit Breakers and Gas-Insulated Switchgear
IEEE C37.20.2-2015 IEEE Standard for Metal-Clad Switchgear
EN 62271-1:2017 High-voltage switchgear and controlgear - Part 1: Common specifications for alternating current switchgear and controlgear
IEEE C37.30-2:2015 GUIDE FOR WIND-LOADING EVALUATION OF HIGH-VOLTAGE (>1000 V) AIR-BREAK SWITCHES
IEEE C37.23-2003 IEEE Standard for Metal-Enclosed Bus
IEC/ISO/IEEE 80005-1:2012 Utility connections in port - Part 1: High Voltage Shore Connection (HVSC) Systems - General requirements
IEEE C37.010-1999 IEEE Application Guide for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis
IEEE C37.302-2015 IEEE Guide for Fault Current Limiter (FCL) Testing of FCLs Rated above 1000 V AC
I.S. EN 62271-1:2017 HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: COMMON SPECIFICATIONS FOR ALTERNATING CURRENT SWITCHGEAR AND CONTROLGEAR
IEEE C37.63-2013 REDLINE IEEE Standard Requirements for Overhead, Pad-Mounted, Dry-Vault, and Submersible Automatic Line Sectionalizers for Alternating Current Systems Up to 38 kV
IEEE C37.13-2015 REDLINE IEEE Standard for Low-Voltage AC Power Circuit Breakers Used in Enclosures
NEMA ICS 3.1 : 2009(R2014) GUIDE FOR THE APPLICATION, HANDLING, STORAGE, INSTALLATION, AND MAINTENANCE OF MEDIUM-VOLTAGE AC CONTACTORS, CONTROLLERS, AND CONTROL CENTERS
IEEE C57.16-2011 IEEE Standard for Requirements, Terminology, and Test Code for Dry-Type Air-Core Series-Connected Reactors
IEEE C37.06-2009 IEEE Standard for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis--Preferred Ratings and Related Required Capabilities for Voltages Above 1000 V
IEEE 1861-2014 IEEE Guide for On-Site Acceptance Tests of Electrical Equipment and System Commissioning of 1000 kV AC and Above
IEEE C37.30.2-2015 IEEE Guide for Wind-Loading Evaluation of High-Voltage (>1000 V) Air-Break Switches
IEEE C37.47-2011 IEEE Standard Specifications for High-Voltage (>1000 V) Distribution Class Current-Limiting Type Fuses and Fuse Disconnecting Switches
IEEE C37.46-2010 IEEE Standard Specifications for High-Voltage (>1000 V) Expulsion and Current-Limiting Power Class Fuses and Fuse Disconnecting Switches
IEEE 1709-2010 IEEE Recommended Practice for 1 kV to 35 kV Medium-Voltage DC Power Systems on Ships
BS EN 62271-1:2017 High-voltage switchgear and controlgear Common specifications for alternating current switchgear and controlgear
IEEE 1662-2008 IEEE Guide for the Design and Application of Power Electronics in Electrical Power Systems on Ships
BS ISO/IEC/IEEE 80005-1:2012 Utility connections in port High Voltage Shore Connection (HVSC) Systems. General requirements
IEEE/IEC C37.60-2012 IEEE/IEC International Standard - High-voltage switchgear and controlgear - Part 111: Automatic circuit reclosers and fault interrupters for alternating current systems up to 38 kV
IEC 62271-1:2017 High-voltage switchgear and controlgear - Part 1: Common specifications for alternating current switchgear and controlgear
IEEE C37.74-2014 REDLINE IEEE Standard Requirements for Subsurface, Vault, and Padmounted Load-Interrupter Switchgear and Fused Load-Interrupter Switchgear for Alternating Current Systems up to 38 kV
IEEE C37.10-2011 REDLINE IEEE Guide for Investigation, Analysis, and Reporting of Power Circuit Breaker Failures
IEEE C37.123-1996 IEEE Guide to Specifications for Gas-Insulated, Electric Power Substation Equipment
IEC 62271-111:2012 High-voltage switchgear and controlgear - Part 111: Automatic circuit reclosers and fault interrupters for alternating current systems up to 38 kV
UL 1008A:2ED 2017-09 Transfer Switch Equipment, Over 1000 Volts
CSA C22.2 NO. 178.3:17 Transfer switch equipment, over 1000 volts (Binational standard with UL 1008A)
IEEE C37.42-2009 IEEE Standard Specifications for High-Voltage (> 1000 V) Expulsion-Type Distribution-Class Fuses, Fuse and Disconnecting Cutouts, Fuse Disconnecting Switches, and Fuse Links, and Accessories Used with These Devices
IEEE C37.11-2014 IEEE Standard Requirements for Electrical Control for AC High-Voltage (>1000 V) Circuit Breakers
IEEE C37.122.1-2014 REDLINE IEEE Guide for Gas-Insulated Substations Rated Above 52 kV
IEEE C37.24-2003 IEEE Guide for Evaluating the Effect of Solar Radiation on Outdoor Metal-Enclosed Switchgear
IEEE C37.20.4-2013 REDLINE IEEE Standard for Indoor AC Switches (1 kV to 38 kV) for Use in Metal-Enclosed Switchgear
IEEE C37.12-2008 REDLINE IEEE Guide for Specifications of High-Voltage Circuit Breakers (over 1000 Volts)
IEEE C37.41-2008 REDLINE IEEE Standard Design Tests for High-Voltage (>1000 V) Fuses, Fuse and Disconnecting Cutouts, Distribution Enclosed Single-Pole Air Switches, Fuse Disconnecting Switches, and Fuse Links and Accessories Used with These Devices
IEEE C37.20.3-2013 REDLINE IEEE Standard for Metal-Enclosed Interrupter Switchgear (1 kV-38 kV)
IEEE C37.21-2005 IEEE Standard for Control Switchboards
IEEE C37.20.1-2015 REDLINE IEEE Standard for Metal-Enclosed Low-Voltage (1000 Vac and below, 3200 Vdc and below) Power Circuit Breaker Switchgear
IEEE C37.010-2016 IEEE Application Guide for AC High-Voltage Circuit Breakers > 1000 Vac Rated on a Symmetrical Current Basis
IEEE C37.04-2018 IEEE Standard for Ratings and Requirements for AC High-Voltage Circuit Breakers with Rated Maximum Voltage Above 1000 V
IEEE C37.30.1-2011 IEEE Standard Requirements for AC High-Voltage Air Switches Rated Above 1000 V
IEEE C37.23-2015 IEEE Standard for Metal-Enclosed Bus
IEEE 1300-2011 IEEE Guide for Cable Connections for Gas-Insulated Substations
IEEE C37.24-2017 IEEE Guide for Evaluating the Effect of Solar Radiation on Outdoor Metal-Enclosed Switchgear
IEEE C37.123-2016 IEEE Guide for Specifications for High-Voltage Gas-Insulated Substations Rated 52 kV and Above
IEEE C37.09-2018 REDLINE IEEE Standard Test Procedures for AC High-Voltage Circuit Breakers with Rated Maximum Voltage Above 1000 V
IEEE C37.30.3-2018 IEEE Standard Requirements for High-Voltage Interrupter Switches, Interrupters, or Interrupting Aids Used on or Attached to Switches Rated for Alternating Currents Above 1000 V
IEEE C37.12-2018 IEEE Guide for Specifications of High-Voltage Circuit Breakers (over 1000 V)

IEC 60480:2004 Guidelines for the checking and treatment of sulfur hexafluoride (SF<sub>6</sub>) taken from electrical equipment and specification for its re-use
IEC 60060-2:2010 High-voltage test techniques - Part 2: Measuring systems
IEEE C37.90.1-2002 IEEE Standard Surge Withstand Capability (SWC) Tests for Relays and Relay Systems Associated with Electric Power Apparatus
IEEE DRAFT C37.04B : D12 2006 DRAFT - AMENDMENT TO "IEEE STANDARD FOR RATING STRUCTURE FOR AC HIGH-VOLTAGE CIRCUIT BREAKERS RATED ON A SYMMETRICAL CURRENT BASIS" TO CHANGE THE DESCRIPTION OF TRANSIENT RECOVERY VOLTAGE FOR HARMONIZATION WITH IEC 60056
IEC 60270:2000+AMD1:2015 CSV High-voltage test techniques - Partial discharge measurements
IEC 60721-1:1990+AMD1:1992+AMD2:1995 CSV Classification of environmental conditions - Part 1: Environmental parameters and their severities
IEEE 1-2000 IEEE Recommended Practice - General Principles for Temperature Limits in the Rating of Electrical Equipment and for the Evaluation of Electrical Insulation
NEMA MG 1 : 2016 MOTORS AND GENERATORS
IEEE 1313.1-1996 IEEE Standard for Insulation Coordination - Definitions, Principles and Rules
IEC 61000-4-4 : 3.0EN+(REDLINE+VERSION) ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-4: TESTING AND MEASUREMENT TECHNIQUES - ELECTRICAL FAST TRANSIENT/BURST IMMUNITY TEST
IEC 61000-4-1:2006 Electromagnetic compatibility (EMC) - Part 4-1: Testing and measurement techniques - Overview of IEC 61000-4 series
IEEE 1291-1993 IEEE Guide for Partial Discharge Measurement in Power Switchgear
IEEE/IEC C37.60-2012 IEEE/IEC International Standard - High-voltage switchgear and controlgear - Part 111: Automatic circuit reclosers and fault interrupters for alternating current systems up to 38 kV
IEEE 4-1995 IEEE Standard Techniques for High-Voltage Testing
NEMA 107:2016 Methods of Measurement of Radio Influence Voltage (RIV) of High Voltage Apparatus
IEEE C37.74-2014 REDLINE IEEE Standard Requirements for Subsurface, Vault, and Padmounted Load-Interrupter Switchgear and Fused Load-Interrupter Switchgear for Alternating Current Systems up to 38 kV
IEC 60050-151:2001 International Electrotechnical Vocabulary (IEV) - Part 151: Electrical and magnetic devices
IEC 60050-441:1984 International Electrotechnical Vocabulary (IEV) - Part 441: Switchgear, controlgear and fuses
IEEE C37.20.2-2015 IEEE Standard for Metal-Clad Switchgear
IEC 61000-4-4:2012 RLV Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test
IEC TR 62271-300:2006 High-voltage switchgear and controlgear - Part 300: Seismic qualification of alternating current circuit-breakers
IEC 61000-4-12 : 3.0 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-12: TESTING AND MEASUREMENT TECHNIQUES - RING WAVE IMMUNITY TEST
IEC 60376:2005 Specification of technical grade sulfur hexafluoride (SF<sub>6</sub>) for use in electrical equipment
IEEE C37.81-1989 IEEE Guide for Seismic Qualification of Class 1E Metal-Enclosed Power Switchgear Assemblies
IEC TR 61000-5-2:1997 Electromagnetic compatibility (EMC) - Part 5: Installation and mitigation guidelines - Section 2: Earthing and cabling
IEEE 1125-1993 IEEE Guide for Moisture Measurement and Control in SF6 Gas-Insulated Equipment
IEC 60694:1996+AMD1:2000+AMD2:2001 CSV Common specifications for high-voltage switchgear and controlgear standards
IEC 60085:2007 Electrical insulation - Thermal evaluation and designation
IEEE 4-2013 IEEE Standard for High-Voltage Testing Techniques
IEC 60296:2012 RLV Fluids for electrotechnical applications - Unused mineral insulating oils for transformers and switchgear
IEEE C37.20.3-2013 REDLINE IEEE Standard for Metal-Enclosed Interrupter Switchgear (1 kV-38 kV)
IEEE C37.010-1999 IEEE Application Guide for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis
ANSI C37.85 : 1989 ALTERNATING-CURRENT HIGH-VOLTAGE POWER VACUUM INTERRUPTERS - SAFETY REQUIREMENTS FOR X-RADIATION LIMITS
IEEE 1247 : 2005 INTERRUPTER SWITCHES FOR ALTERNATING CURRENT, RATED ABOVE 1000 V
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
IEEE C37.40-2003 IEEE Standard Service Conditions and Definitions for High-Voltage Fuses, Distribution Enclosed Single-Pole Air Switches, Fuse Disconnecting Switches, and Accessories
IEC 60068-2-17:1994 Basic environmental testing procedures - Part 2-17: Tests - Test Q: Sealing
IEEE C63.2-2009 American National Standard for Electromagnetic Noise and Field Strength Instrumentation, 10 Hz to 40 GHz Specifications
ISO 286-1:2010 Geometrical product specifications (GPS) ISO code system for tolerances on linear sizes Part 1: Basis of tolerances, deviations and fits
IEC TR 60943:1998+AMD1:2008 CSV Guidance concerning the permissible temperature rise for parts of electrical equipment, in particular for terminals
ASTM D 2472 : 2015 : REDLINE Standard Specification for Sulfur Hexafluoride
IEEE C37.09-1999 IEEE Standard Test Procedure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis
IEEE C37.90.1-2012 IEEE Standard for Surge Withstand Capability (SWC) Tests for Relays and Relay Systems Associated with Electric Power Apparatus
ISO 9001:2015 Quality management systems — Requirements
IEC 62271-1:2017 High-voltage switchgear and controlgear - Part 1: Common specifications for alternating current switchgear and controlgear
IEEE C37.24-2003 IEEE Guide for Evaluating the Effect of Solar Radiation on Outdoor Metal-Enclosed Switchgear
IEC 60071-2:1996 Insulation co-ordination - Part 2: Application guide
IEC 60050-826:2004 International Electrotechnical Vocabulary (IEV) - Part 826: Electrical installations
CISPR 11:2015 RLV Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement
NEMA CC1 : 2009(R2015) ELECTRIC POWER CONNECTORS FOR SUBSTATIONS
IEC 60059:1999+AMD1:2009 CSV IEC standard current ratings
IEC 60060-1:2010 High-voltage test techniques - Part 1: General definitions and test requirements
IEEE C37.21-2005 IEEE Standard for Control Switchboards
IEC 60071-1:2006+AMD1:2010 CSV Insulation co-ordination - Part 1: Definitions, principles and rules
IEEE DRAFT C37.06 : D6 2004 AC HIGH-VOLTAGE CIRCUIT BREAKERS RATED ON A SYMMETRICAL CURRENT BASIS - PREFERRED RATINGS AND RELATED REQUIRED CAPABILITIES
IEEE C37.04-1999 IEEE Standard Rating Structure for AC High-Voltage Circuit Breakers
IEEE C37.06-2009 IEEE Standard for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis--Preferred Ratings and Related Required Capabilities for Voltages Above 1000 V
IEEE 693-2005 IEEE Recommended Practice for Seismic Design of Substations
IEEE C57.106-2006 IEEE Guide for Acceptance and Maintenance of Insulating Oil in Equipment
IEC TR 61000-5-1:1996 Electromagnetic compatibility (EMC) - Part 5: Installation and mitigation guidelines - Section 1: General considerations - Basic EMC publication
IEEE C37.100-1992 IEEE Standard Definitions for Power Switchgear

View more information
US$204.34
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.