• There are no items in your cart

ISO 19901-3:2014

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Petroleum and natural gas industries — Specific requirements for offshore structures — Part 3: Topsides structure
Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Superseded date

01-10-2024

Language(s)

English, French, Russian

Published date

12-03-2014

ISO 19901-3:2014 gives requirements for the design, fabrication, installation, modification and structural integrity management for the topsides structure for an oil and gas platform. It complements ISO 19902, ISO 19903, ISO 19904‑1, ISO 19905‑1 and ISO 19906, which give requirements for various forms of support structure. Requirements in this part of ISO 19901 concerning modifications and maintenance relate only to those aspects that are of direct relevance to the structural integrity of the topsides structure.

ISO 19901-3:2014 is applicable to the topsides of offshore structures for the petroleum and natural gas industries, as follows:

  • topsides of fixed offshore structures;
  • discrete structural units placed on the hull structures of floating offshore structures and mobile offshore units;
  • certain aspects of the topsides of arctic structures.

ISO 19901-3:2014 contains requirements for, and guidance and information on, the following aspects of topsides structures:

  • design, fabrication, installation and modification;
  • in-service inspection and structural integrity management;
  • assessment of existing topsides structures;
  • reuse;
  • decommissioning, removal and disposal;
  • prevention, control and assessment of fire, explosions and other accidental events.

ISO 19901-3:2014 applies to structural components including the following:

  • primary and secondary structure in decks, module support frames and modules;
  • flare structures;
  • crane pedestal and other crane support arrangements;
  • helicopter landing decks (helidecks);
  • permanent bridges between separate offshore structures;
  • masts, towers and booms on offshore structures.

Committee
ISO/TC 67/SC 7
DevelopmentNote
Supersedes ISO/DIS 19901-3. (12/2014)
DocumentType
Standard
Pages
117
PublisherName
International Organization for Standardization
Status
Superseded
SupersededBy
Supersedes
UnderRevision

CAN/CSA-ISO 19901-4:17 Petroleum and natural gas industries — Specific requirements for offshore structures — Part 4: Geotechnical and foundation design considerations (Adopted ISO 19901-4:2016, second edition, 2016-07-15)
ABS 0223 : 2016 GUIDANCE NOTES ON TOPSIDE STRUCTURE FATIGUE ASSESSMENT FOR SHIP-TYPE FLOATING PRODUCTION INSTALLATIONS
BS ISO 18647:2017 Petroleum and natural gas industries. Modular drilling rigs for offshore fixed platforms
API 2FPS : 2011 PLANNING, DESIGNING, AND CONSTRUCTING FLOATING PRODUCTION SYSTEMS
18/30337228 DC : 0 BS EN ISO 19900 - PETROLEUM AND NATURAL GAS INDUSTRIES - GENERAL REQUIREMENTS FOR OFFSHORE STRUCTURES
I.S. EN ISO 19901-2:2017 PETROLEUM AND NATURAL GAS INDUSTRIES - SPECIFIC REQUIREMENTS FOR OFFSHORE STRUCTURES - PART 2: SEISMIC DESIGN PROCEDURES AND CRITERIA (ISO 19901-2:2017)
BS EN ISO 19906:2010 Petroleum and natural gas industries. Arctic offshore structures
I.S. EN ISO 19903:2006 PETROLEUM AND NATURAL GAS INDUSTRIES - FIXED CONCRETE OFFSHORE STRUCTURES
BS EN ISO 19902 : 2007 PETROLEUM AND NATURAL GAS INDUSTRIES - FIXED STEEL OFFSHORE STRUCTURES
BS EN ISO 19901-4:2003 Petroleum and natural gas industries. Specific requirements for offshore structures Geotechnical and foundation design considerations
PREN ISO 19900 : DRAFT 2012 PETROLEUM AND NATURAL GAS INDUSTRIES - GENERAL REQUIREMENTS FOR OFFSHORE STRUCTURES (ISO/DIS 19900:2012)
17/30298929 DC : DRAFT SEP 2017 BS EN ISO 19906 - PETROLEUM AND NATURAL GAS INDUSTRIES - ARCTIC OFFSHORE STRUCTURES
BS ISO 19903 : 2006 AMD 16926 PETROLEUM AND NATURAL GAS INDUSTRIES - FIXED CONCRETE OFFSHORE STRUCTURES
API 2EQ : 2014 SEISMIC DESIGN PROCEDURES AND CRITERIA FOR OFFSHORE STRUCTURES
CSA ISO 19906 : 2011 PETROLEUM AND NATURAL GAS INDUSTRIES - ARCTIC OFFSHORE STRUCTURES
04/19985217 DC : DRAFT NOV 2004 ISO 19903 - PETROLEUM AND NATURAL GAS INDUSTRIES - FIXED CONCRETE OFFSHORE STRUCTURES
ISO 18647:2017 Petroleum and natural gas industries — Modular drilling rigs for offshore fixed platforms
12/30257647 DC : 0 BS ISO 19900 - PETROLEUM AND NATURAL GAS INDUSTRIES - GENERAL REQUIREMENTS FOR OFFSHORE STRUCTURES
17/30291980 DC : 0 BS EN ISO 19904-1 - PETROLEUM AND NATURAL GAS INDUSTRIES - FLOATING OFFSHORE STRUCTURES - PART 1: SHIP-SHAPED, SEMI-SUBMERSIBLE, SPAR AND SHALLOW-DRAUGHT CYLINDRICAL STRUCTURES
15/30303554 DC : 0 BS ISO 18647 - SPECIFICATIONS FOR OFFSHORE MODULAR DRILLING RIGS ON FIXED PLATFORMS
17/30313889 DC : DRAFT AUG 2017 BS EN ISO 19903 - PETROLEUM AND NATURAL GAS INDUSTRIES - CONCRETE OFFSHORE STRUCTURES
CSA ISO 19900 : 2014 PETROLEUM AND NATURAL GAS INDUSTRIES - GENERAL REQUIREMENTS FOR OFFSHORE STRUCTURES
ISO 19906:2010 Petroleum and natural gas industries Arctic offshore structures
CSA Z19901-2 : 2007 : R2016 PETROLEUM AND NATURAL GAS INDUSTRIES - SPECIFIC REQUIREMENTS FOR OFFSHORE STRUCTURES - PART 2: SEISMIC DESIGN PROCEDURES AND CRITERIA
04/19985213 DC : DRAFT NOV 2004 ISO 19902 - PETROLEUM AND NATURAL GAS INDUSTRIES - FIXED STEEL OFFSHORE STRUCTURES
CSA ISO 19906 : 2011 : R2016 PETROLEUM AND NATURAL GAS INDUSTRIES - ARCTIC OFFSHORE STRUCTURES
EN ISO 19901-4:2016 Petroleum and natural gas industries - Specific requirements for offshore structures - Part 4: Geotechnical and foundation design considerations (ISO 19901-4:2016)
UNI EN ISO 19900 : 2014 PETROLEUM AND NATURAL GAS INDUSTRIES - GENERAL REQUIREMENTS FOR OFFSHORE STRUCTURES
12/30259695 DC : 0 BS EN 14314:2009/A1 - THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE PHENOLIC FOAM (PF) PRODUCTS - SPECIFICATION
API 2MET : 2014 DERIVATION OF METOCEAN DESIGN AND OPERATING CONDITIONS
03/700291 DC : DRAFT APR 2003 BS ISO 19901-2 - PETROLEUM AND NATURAL GAS INDUSTRIES - SPECIFIC REQUIREMENTS FOR OFFSHORE STRUCTURES - PART 2: SEISMIC DESIGN PROCEDURES AND CRITERIA
BS EN ISO 19901-2:2017 Petroleum and natural gas industries. Specific requirements for offshore structures Seismic design procedures and criteria
ONORM EN ISO 19906 : 2011 PETROLEUM AND NATURAL GAS INDUSTRIES - ARCTIC OFFSHORE STRUCTURES
API 2N : 2015 PLANNING, DESIGNING, AND CONSTRUCTING STRUCTURES AND PIPELINES FOR ARCTIC CONDITIONS
I.S. EN ISO 19900:2013 PETROLEUM AND NATURAL GAS INDUSTRIES - GENERAL REQUIREMENTS FOR OFFSHORE STRUCTURES (ISO 19900:2013)
ISO 19900:2013 Petroleum and natural gas industries General requirements for offshore structures
BS EN ISO 19900:2013 Petroleum and natural gas industries. General requirements for offshore structures
EN ISO 19900:2013 Petroleum and natural gas industries - General requirements for offshore structures (ISO 19900:2013)
EN ISO 19906:2010 Petroleum and natural gas industries - Arctic offshore structures (ISO 19906:2010)
15/30325690 DC : 0 BS EN ISO 19901-2 - PETROLEUM AND NATURAL GAS INDUSTRIES - SPECIFIC REQUIREMENTS FOR OFFSHORE STRUCTURES - PART 2: SEISMIC DESIGN PROCEDURES AND CRITERIA
CSA Z19901-2 :2007 PETROLEUM AND NATURAL GAS INDUSTRIES - SPECIFIC REQUIREMENTS FOR OFFSHORE STRUCTURES - PART 2: SEISMIC DESIGN PROCEDURES AND CRITERIA
UNI EN ISO 19906 : 2012 PETROLEUM AND NATURAL GAS INDUSTRIES - ARCTIC OFFSHORE STRUCTURES
I.S. EN ISO 19906:2010 PETROLEUM AND NATURAL GAS INDUSTRIES - ARCTIC OFFSHORE STRUCTURES
ISO 19901-2:2017 Petroleum and natural gas industries Specific requirements for offshore structures Part 2: Seismic design procedures and criteria
EN ISO 19901-2:2017 Petroleum and natural gas industries - Specific requirements for offshore structures - Part 2: Seismic design procedures and criteria (ISO 19901-2:2017)
IEC TS 62600-2:2016 Marine energy - Wave, tidal and other water current converters - Part 2: Design requirements for marine energy systems
ISO 19901-4:2016 Petroleum and natural gas industries Specific requirements for offshore structures Part 4: Geotechnical and foundation design considerations

ISO 19901-6:2009 Petroleum and natural gas industries — Specific requirements for offshore structures — Part 6: Marine operations
ISO 19901-2:2017 Petroleum and natural gas industries Specific requirements for offshore structures Part 2: Seismic design procedures and criteria
API 2A WSD : 2014 PLANNING, DESIGNING, AND CONSTRUCTING FIXED OFFSHORE PLATFORMS - WORKING STRESS DESIGN
ISO 8501-1:2007 Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings
ISO 19900:2013 Petroleum and natural gas industries General requirements for offshore structures
API SPEC 4F : 2013 SPECIFICATION FOR DRILLING AND WELL SERVICING STRUCTURES
BS EN 1995-1-2:2004 Eurocode 5. Design of timber structures General - Structural fire design
ISO 12944-5:2007 Paints and varnishes Corrosion protection of steel structures by protective paint systems Part 5: Protective paint systems
CSA S16 : 2014 DESIGN OF STEEL STRUCTURES
API 2V : 2004 DESIGN OF FLAT PLATE STRUCTURES
ISO 2394:2015 General principles on reliability for structures
BS EN 1993-1-9:2005 Eurocode 3. Design of steel structures Fatigue
ASCE 7 05 : 2006 MINIMUM DESIGN LOADS FOR BUILDINGS AND OTHER STRUCTURES
ISO 19903:2006 Petroleum and natural gas industries Fixed concrete offshore structures
ISO 19904-1:2006 Petroleum and natural gas industries Floating offshore structures Part 1: Monohulls, semi-submersibles and spars
BS EN 1993-1-1 : 2005 EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS
AISC 360 : 2016 SPECIFICATION FOR STRUCTURAL STEEL BUILDINGS
ISO 19906:2010 Petroleum and natural gas industries Arctic offshore structures
API 4E : 3ED 88 SPECIFICATION FOR DRILLING AND WELL SERVICING STRUCTURES
ISO 2631-2:2003 Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration — Part 2: Vibration in buildings (1 Hz to 80 Hz)
BS EN 1993-3-1:2006 Eurocode 3. Design of steel structures Towers, masts and chimneys
ISO 2631-1:1997 Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration — Part 1: General requirements
BS EN 13852-1:2013 Cranes. Offshore cranes General-purpose offshore cranes
ISO 20340:2009 Paints and varnishes Performance requirements for protective paint systems for offshore and related structures
API 2A LRFD : 1993 RECOMMENDED PRACTICE FOR PLANNING, DESIGNING AND CONSTRUCTING FIXED OFFSHORE PLATFORMS - LOAD AND RESISTANCE FACTOR DESIGN
AWS D1.1/D1.1M : 2015 STRUCTURAL WELDING CODE-STEEL
ISO 19901-5:2016 Petroleum and natural gas industries Specific requirements for offshore structures Part 5: Weight control during engineering and construction
ISO 834-1:1999 Fire-resistance tests Elements of building construction Part 1: General requirements
BS EN 1998-1 : 2004 EUROCODE 8: DESIGN OF STRUCTURES FOR EARTHQUAKE RESISTANCE - PART 1: GENERAL RULES, SEISMIC ACTIONS AND RULES FOR BUILDINGS
ISO 22899-1:2007 Determination of the resistance to jet fires of passive fire protection materials Part 1: General requirements
CAA CAP 437 : 2016 OFFSHORE HELICOPTER LANDING AREAS
ISO 19901-1:2015 Petroleum and natural gas industries Specific requirements for offshore structures Part 1: Metocean design and operating considerations
ISO 13702:2015 Petroleum and natural gas industries — Control and mitigation of fires and explosions on offshore production installations — Requirements and guidelines
BS EN 1999-1-1 : 2007 EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-1: GENERAL STRUCTURAL RULES
ISO 19905-1:2016 Petroleum and natural gas industries — Site-specific assessment of mobile offshore units — Part 1: Jack-ups
ISO 6897:1984 Guidelines for the evaluation of the response of occupants of fixed structures, especially buildings and off-shore structures, to low-frequency horizontal motion (0,063 to 1 Hz)
BS EN 1995-1-1 : 2012 EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 1-1: GENERAL - COMMON RULES AND RULES FOR BUILDINGS
BS EN 1993-1-2:2005 Eurocode 3. Design of steel structures General rules - Structural fire design
ISO 13626:2003 Petroleum and natural gas industries — Drilling and production equipment — Drilling and well-servicing structures
ICAO 7300 ANNEX 14 VOL.2 : 2013 ANNEX 14 TO THE CONVENTION ON INTERNATIONAL CIVIL AVIATION (ICAO 7300) - AERODROMES - VOLUME 2: HELIPORTS
NORSOK M 501 : REV 6 SURFACE PREPARATION AND PROTECTIVE COATING
NS 3472 : 2001 STEEL STRUCTURES - DESIGN RULES
NORSOK N 004 : REV 3 AC 2014 DESIGN OF STEEL STRUCTURES

View more information
US$73.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.