ISO 2320:2015
Current
The latest, up-to-date edition.
Fasteners Prevailing torque steel nuts Functional properties
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
English, French
11-30-2015
ISO 2320:2015 specifies the functional properties for prevailing torque steel nuts when tested at an ambient temperature range of +10 C to +35 C. It includes a combined test method to determine the prevailing torque properties and the torque/clamp force properties at the same time.
It applies to prevailing torque all metal type nuts and prevailing torque non-metallic insert type nuts:
- with triangular ISO thread in accordance with ISO 681;
- with diameter/pitch combination in accordance with ISO 261 and ISO 262;
- with coarse pitch thread M5 to M39 or with fine pitch thread M8 1 to M39 3;
- with thread tolerances in accordance with ISO 965-2;
- with mechanical properties in accordance with ISO 8982;
Prevailing torque values specified in this standard are based on laboratory test conditions.
NOTE 1 Actual prevailing torques in practical application can vary.
NOTE 2 All metal type nuts conforming to the requirements of this International Standard are used in applications ranging from 50 C to +150 C.
NOTE 3 Non-metallic insert type nuts conforming to the requirements of this International Standard are used in applications ranging from 50 C to +120 C.
WARNING ? Temperatures outside the ambient temperature range can influence the functional properties (torque/clamp force and prevailing torque properties), see Annex A.
DevelopmentNote |
Supersedes ISO/DIS 2320. (12/2015)
|
DocumentType |
Standard
|
Pages |
20
|
PublisherName |
International Organization for Standardization
|
Status |
Current
|
Supersedes |
Standards | Relationship |
NBN EN ISO 2320 : 2016 | Identical |
NEN EN ISO 2320 : 2016 | Identical |
NS EN ISO 2320 : 1997 | Identical |
I.S. EN ISO 2320:2015 | Identical |
PN EN ISO 2320 : 2016 | Identical |
SN EN ISO 2320 : 2016 | Identical |
UNI EN ISO 2320 : 2009 | Identical |
UNI EN ISO 2320:2016 | Identical |
SS-EN ISO 2320:2016 | Identical |
UNE-EN ISO 2320:2009 | Identical |
BS EN ISO 2320:2015 | Identical |
EN ISO 2320:2015 | Identical |
NF EN ISO 2320 : 2016 | Identical |
DIN EN ISO 2320:2016-05 | Identical |
SAC GB/T 3098.9 : 2010 | Identical |
DIN 267-15:1983-11 | Similar to |
UNI 7323-5 : 1975 | Similar to |
UNE-EN ISO 2320:2017 | Identical |
GOST R ISO 2320 : 2009 | Identical |
SANS 1700-5-5 : 2ED 2010 | Identical |
NFE 25 408 : 1985 | Similar to |
BIS IS 1367-8 : 2014 | Identical |
ISO 7720:2012 | Prevailing torque type all-metal hexagon nuts, style 2 Property class 9 |
16/30337587 DC | BS EN ISO 7042. Prevailing torque (all-metal) hexagon high nuts. Product grades A and B |
16/30337594 DC : DRAFT APR 2016 | BS ISO 7044 - PREVAILING TORQUE (ALL-METAL) HEXAGON HIGH NUTS WITH FLANGE - PRODUCT GRADES A AND B |
BS ISO 7041:2012 | Prevailing torque type hexagon nuts (with non-metallic insert), style 2. Property classes 9 and 12 |
14/30298932 DC : 0 | BS EN ISO 10484 - FASTENERS - WIDENING TEST ON NUTS |
I.S. EN ISO 898-2:2012 | MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 2: NUTS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-2:2012) |
UNE-EN 1993-1-8:2013 | Eurocode 3: Design of steel structures - Part 1-8: Design of joints |
DIN EN 1090-3:2008-09 | EXECUTION OF STEEL AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL RULES FOR EXECUTION OF ALUMINIUM STRUCTURES |
BS EN 1090-3:2008 | Execution of steel structures and aluminium structures Technical requirements for aluminium structures |
I.S. EN ISO 3269:2000 | FASTENERS - ACCEPTANCE INSPECTION |
DIN EN ISO 7719:2016-05 (Draft) | PREVAILING TORQUE TYPE ALL-METAL HEXAGON REGULAR NUTS - PROPERTY CLASSES 5, 8 AND 10 (ISO 7719:2012) |
DIN EN ISO 10512:2016-05 (Draft) | PREVAILING TORQUE TYPE HEXAGON REGULAR NUTS (WITH NON-METALLIC INSERT) WITH METRIC FINE PITCH THREAD - PROPERTY CLASSES 6, 8 AND 10 (ISO 10512:2012) |
DIN EN ISO 7040:2016-05 (Draft) | PREVAILING TORQUE TYPE HEXAGON REGULAR NUTS (WITH NON-METALLIC INSERT) - PROPERTY CLASSES 5, 8 AND 10 (ISO 7040:2012) |
DIN EN ISO 10484:2014-06 (Draft) | WIDENING TEST ON NUTS |
BS EN 493:1992 | Fasteners. Surface discontinuities. Nuts |
BS EN ISO 10484:2004 | Widening test on nuts |
BS EN ISO 7719:2012 | Prevailing torque type all-metal hexagon regular nuts. Property classes 5, 8 and 10 |
UNE-EN ISO 10513:2013 | Prevailing torque type all-metal hexagon high nuts with metric fine pitch thread - Property classes 8, 10 and 12 (ISO 10513:2012) |
DIN EN 1090-2:2011-10 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
IS 1367 : Part 1 : 2014 | TECHNICAL SUPPLY CONDITIONS FOR THREADED STEEL FASTENERS PART 1 GENERAL REQUIREMENTS FOR BOLTS, SCREWS, STUDS AND NUTS<br> |
ISO 16228:2017 | Fasteners — Types of inspection documents |
PREN 1090-3 : DRAFT 2017 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES |
BS ISO 7720:2012 | Prevailing torque type all-metal hexagon nuts, style 2. Property class 9 |
15/30320416 DC : 0 | BS EN 1090-2 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
BS ISO 10484 : 97 AMD 15307 | WIDENING TEST ON NUTS |
PREN 1090-2 : DRAFT 2015 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
UNE-EN 1090-2:2011 | Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures |
I.S. EN 1090-3:2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES |
UNE-EN 15048-2:2017 | Non-preloaded structural bolting assemblies - Part 2: Fitness for purpose |
ISO 8992:2005 | Fasteners — General requirements for bolts, screws, studs and nuts |
BS EN 1090-2 : 2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
DIN EN 1090-2:2015-07 (Draft) | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
UNI EN 1090-2 : 2011 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
DIN EN 1993-1-8:2010-12 | Eurocode 3: Design of steel structures - Part 1-8: Design of joints (includes Corrigendum AC:2009) |
UNE-EN ISO 10512:2013 | Prevailing torque type hexagon regular nuts (with non-metallic insert) with metric fine pitch thread - Property classes 6, 8 and 10 (ISO 10512:2012) |
I.S. EN ISO 7719:2012 | PREVAILING TORQUE TYPE ALL-METAL HEXAGON REGULAR NUTS - PROPERTY CLASSES 5, 8 AND 10 (ISO 7719:2012) |
I.S. EN ISO 7042:2012 | PREVAILING TORQUE TYPE ALL-METAL HEXAGON HIGH NUTS - PROPERTY CLASSES 5, 8, 10 AND 12 (ISO 7042:2012) |
I.S. EN ISO 10512:2012 | PREVAILING TORQUE TYPE HEXAGON REGULAR NUTS (WITH NON-METALLIC INSERT) WITH METRIC FINE PITCH THREAD - PROPERTY CLASSES 6, 8 AND 10 (ISO 10512:2012) |
I.S. EN ISO 10511:2012 | PREVAILING TORQUE TYPE HEXAGON THIN NUTS (WITH NON-METALLIC INSERT) (ISO 10511:2012) |
I.S. EN ISO 10513:2012 | PREVAILING TORQUE TYPE ALL-METAL HEXAGON HIGH NUTS WITH METRIC FINE PITCH THREAD - PROPERTY CLASSES 8, 10 AND 12 (ISO 10513:2012) |
I.S. EN 15048-2:2016 | NON-PRELOADED STRUCTURAL BOLTING ASSEMBLIES - PART 2: FITNESS FOR PURPOSE |
I.S. EN ISO 7040:2012 | PREVAILING TORQUE TYPE HEXAGON REGULAR NUTS (WITH NON-METALLIC INSERT) - PROPERTY CLASSES 5, 8 AND 10 (ISO 7040:2012) |
DIN EN ISO 10484:2004-10 | Widening test on nuts (ISO 10484:1997) |
VDI/VDE 2251 Blatt 1.1:2016-02 | Bolted joints - Tensioned joints - Precision engineering components |
ISO 7041:2012 | Prevailing torque type hexagon nuts (with non-metallic insert), style 2 Property classes 9 and 12 |
I.S. EN 493:1993 | FASTENERS - SURFACE DISCONTINUITIES - NUTS |
16/30337591 DC : DRAFT APR 2016 | BS ISO 7043 - PREVAILING TORQUE HEXAGON HIGH NUTS WITH FLANGE (WITH NON-METALLIC INSERT) - PRODUCT GRADES A AND B |
16/30337584 DC : 0 | BS ISO 7041 - PREVAILING TORQUE HEXAGON HIGH NUTS (WITH NON-METALLIC INSERT) - PRODUCT GRADES A AND B |
15/30280562 DC : 0 | BS EN ISO 16228 - FASTENERS - INSPECTION DOCUMENTS |
DIN ISO 8992:2005-09 | Fasteners - General requirements for bolts, screws, studs and nuts (ISO 8992:2005) |
16/30337580 DC : 0 | BS EN ISO 7040 - PREVAILING TORQUE HEXAGON REGULAR NUTS (WITH NON-METALLIC INSERT) - PRODUCT GRADES A AND B |
ISO 12126:2012 | Prevailing torque type all-metal hexagon nuts with flange with metric fine pitch thread, style 2 — Product grades A and B |
BS EN ISO 898-2:2012 | Mechanical properties of fasteners made of carbon steel and alloy steel Nuts with specified property classes. Coarse thread and fine pitch thread |
ISO 7044:2012 | Prevailing torque type all-metal hexagon nuts with flange, style 2 — Product grades A and B |
UNE-EN ISO 898-2:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel - Part 2: Nuts with specified property classes - Coarse thread and fine pitch thread (ISO 898-2:2012) |
ISO 12125:2012 | Prevailing torque type hexagon nuts with flange (with non-metallic insert) with metric fine pitch thread, style 2 — Product grades A and B |
EN 1090-2:2008+A1:2011 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
EN ISO 16228:2018 | Fasteners - Types of inspection documents (ISO 16228:2017) |
EN 1090-3:2008 | Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structures |
DIN EN ISO 7042:2016-05 (Draft) | PREVAILING TORQUE TYPE ALL-METAL HEXAGON HIGH NUTS - PROPERTY CLASSES 5, 8, 10 AND 12 (ISO 7042:2012) |
BS EN ISO 7042:2012 | Prevailing torque type all-metal hexagon high nuts. Property classes 5, 8, 10 and 12 |
BS EN ISO 10513:2012 | Prevailing torque type all-metal hexagon high nuts with metric fine pitch thread. Property classes 8, 10 and 12 |
BS EN 1664:1998 | Prevailing torque type all-metal hexagon nuts with flange |
EN 1666:1997 | Prevailing torque type hexagon nuts with flange (with non-metallic insert) with metric fine pitch thread (ISO 12125:1997, modified) |
EN ISO 10513:2012 | Prevailing torque type all-metal hexagon high nuts with metric fine pitch thread - Property classes 8, 10 and 12 (ISO 10513:2012) |
EN ISO 3269:2000 | FASTENERS - ACCEPTANCE INSPECTION |
UNI EN ISO 7042 : 2013 | PREVAILING TORQUE TYPE ALL-METAL HEXAGON HIGH NUTS - PROPERTY CLASSES 5, 8, 10 AND 12 |
UNI EN ISO 10512 : 2013 | PREVAILING TORQUE TYPE HEXAGON REGULAR NUTS (WITH NON-METALLIC INSERT) WITH METRIC FINE PITCH THREAD - PROPERTY CLASSES 6, 8 AND 10 |
UNI EN ISO 7040 : 2013 | PREVAILING TORQUE TYPE HEXAGON REGULAR NUTS (WITH NON-METALLIC INSERT) - PROPERTY CLASSES 5, 8 AND 10 |
UNI EN ISO 7719 : 2013 | PREVAILING TORQUE TYPE ALL-METAL HEXAGON REGULAR NUTS - PROPERTY CLASSES 5, 8 AND 10 |
UNI EN ISO 10513 : 2013 | PREVAILING TORQUE TYPE ALL-METAL HEXAGON HIGH NUTS WITH METRIC FINE PITCH THREAD - PROPERTY CLASSES 8, 10 AND 12 |
UNI EN 1993-1-8 : 2005 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-8: DESIGN OF JOINTS |
UNI EN ISO 10511 : 2013 | PREVAILING TORQUE TYPE HEXAGON THIN NUTS (WITH NON-METALLIC INSERT) |
10/30165716 DC : 0 | BS ISO 898-6 - MECHANICAL PROPERTIES OF FASTENERS - PART 6: NUTS WITH SPECIFIED PROOF LOAD VALUES - FINE PITCH THREAD |
I.S. EN ISO 16228:2018 | FASTENERS - TYPES OF INSPECTION DOCUMENTS (ISO 16228:2017) |
UNI EN 1090-3 : 2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES |
BIS IS 800 : 2007 AMD 1 2012 | GENERAL CONSTRUCTION IN STEEL - CODE OF PRACTICE |
16/30337630 DC | BS EN ISO 7719. Prevailing torque (all-metal) hexagon regular nuts. Product grades A and B |
ISO 7043:2012 | Prevailing torque type hexagon nuts with flange (with non-metallic insert), style 2 — Product grades A and B |
UNI EN ISO 898-2 : 2012 | MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 2: NUTS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD |
17/30348949 DC : 0 | BS EN 1090-3 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES |
DIN EN 15048-2:2016-09 | NON-PRELOADED STRUCTURAL BOLTING ASSEMBLIES - PART 2: FITNESS FOR PURPOSE |
DIN EN ISO 6157-2:2004-10 | Fasteners - Surface discontinuities - Part 2: Nuts (ISO 6157-2:1995) |
BS EN ISO 10512:2012 | Prevailing torque type hexagon regular nuts (with non-metallic insert) with metric fine pitch thread. Property classes 6, 8 and 10 |
BS EN ISO 10511:2012 | Prevailing torque type hexagon thin nuts (with non-metallic insert) |
BS EN ISO 3269:2001 | Fasteners. Acceptance inspection |
ISO 7042:2012 | Prevailing torque type all-metal hexagon high nuts — Property classes 5, 8, 10 and 12 |
ISO 3269:2000 | Fasteners Acceptance inspection |
ISO 6157-2:1995 | Fasteners Surface discontinuities Part 2: Nuts |
BS EN 1663:1998 | Prevailing torque type hexagon nuts with flange (with non-metallic insert) |
BS EN 15048-2:2007 | Non-preloaded structural bolting assemblies Suitability test |
ISO 7719:2012 | Prevailing torque type all-metal hexagon regular nuts — Property classes 5, 8 and 10 |
ISO 10511:2012 | Prevailing torque type hexagon thin nuts (with non-metallic insert) |
ISO 898-2:2012 | Mechanical properties of fasteners made of carbon steel and alloy steel — Part 2: Nuts with specified property classes — Coarse thread and fine pitch thread |
ISO 10513:2012 | Prevailing torque type all-metal hexagon high nuts with metric fine pitch thread — Property classes 8, 10 and 12 |
BS EN 1993-1-8:2005 | Eurocode 3. Design of steel structures Design of joints |
BS EN ISO 6157-2:2004 | Fasteners. Surface discontinuities Nuts |
ISO 7040:2012 | Prevailing torque type hexagon regular nuts (with non-metallic insert) — Property classes 5, 8 and 10 |
UNE-EN ISO 7719:2013 | Prevailing torque type all-metal hexagon regular nuts - Property classes 5, 8 and 10 (ISO 7719:2012) |
ISO 10512:2012 | Prevailing torque type hexagon regular nuts (with non-metallic insert) with metric fine pitch thread — Property classes 6, 8 and 10 |
EN ISO 7040:2012 | Prevailing torque type hexagon regular nuts (with non-metallic insert) - Property classes 5, 8 and 10 (ISO 7040:2012) |
EN 1664:1997 | Prevailing torque type all-metal hexagon nuts with flange (ISO 7044:1997, modified) |
EN ISO 10484:2004 | Widening test on nuts (ISO 10484:1997) |
EN ISO 7042:2012 | Prevailing torque type all-metal hexagon high nuts - Property classes 5, 8, 10 and 12 (ISO 7042:2012) |
EN 1663:1997 | Prevailing torque type hexagon nuts with flange (with non-metallic insert) (ISO 7043:1997, modified) |
EN 1993-1-8:2005/AC:2009 | EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-8: DESIGN OF JOINTS |
EN ISO 7719:2012 | Prevailing torque type all-metal hexagon regular nuts - Property classes 5, 8 and 10 (ISO 7719:2012) |
EN ISO 10512:2012 | Prevailing torque type hexagon regular nuts (with non-metallic insert) with metric fine pitch thread - Property classes 6, 8 and 10 (ISO 10512:2012) |
EN 15048-2:2016 | Non-preloaded structural bolting assemblies - Part 2: Fitness for purpose |
EN 1667:1997 | Prevailing torque type all-metal hexagon nuts with flange metric fine pitch thread (ISO 12126:1997, modified) |
EN ISO 6157-2:2004 | Fasteners - Surface discontinuities - Part 2: Nuts (ISO 6157-2:1995) |
EN 493 : 1992 | FASTENERS - SURFACE DISCONTINUITIES - NUTS |
EN ISO 10511:2012 | Prevailing torque type hexagon thin nuts (with non-metallic insert) (ISO 10511:2012) |
I.S. EN ISO 6157-2:2004 | FASTENERS - SURFACE DISCONTINUITIES - PART 2: NUTS |
I.S. EN ISO 10484:2004 | WIDENING TEST ON NUTS |
10/30165712 DC : 0 | BS ISO 898-2 - MECHANICAL PROPERTIES OF FASTENERS - PART 2: NUTS WITH SPECIFIED PROOF LOAD VALUES; COARSE THREAD |
BS ISO 8992:2005 | Fasteners. General requirements for bolts, screws, studs and nuts |
BS EN ISO 16228:2018 | Fasteners. Types of inspection documents |
I.S. EN 1090-2:2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
UNE-EN 1090-3:2011 | Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structures |
DIN EN ISO 10511:2016-05 (Draft) | PREVAILING TORQUE TYPE HEXAGON THIN NUTS (WITH NON-METALLIC INSERT) (ISO 10511:2012) |
DIN EN ISO 10513:2016-05 (Draft) | PREVAILING TORQUE TYPE ALL-METAL HEXAGON HIGH NUTS WITH METRIC FINE PITCH THREAD - PROPERTY CLASSES 8, 10 AND 12 (ISO 10513:2012) |
UNE-EN ISO 7042:2013 | Prevailing torque type all-metal hexagon high nuts - Property classes 5, 8, 10 and 12 (ISO 7042:2012) |
UNE-EN ISO 7040:2013 | Prevailing torque type hexagon regular nuts (with non-metallic insert) - Property classes 5, 8 and 10 (ISO 7040:2012) |
UNE-EN ISO 10511:2013 | Prevailing torque type hexagon thin nuts (with non-metallic insert) (ISO 10511:2012) |
ISO 10484:1997 | Widening test on nuts |
BS EN 1667:1998 | Prevailing torque type all-metal hexagon nuts with flange with metric fine pitch thread |
BS EN 1666:1998 | Prevailing torque type hexagon nuts with flange (with non-metallic insert) with metric fine pitch thread |
BS EN ISO 7040:2012 | Prevailing torque type hexagon regular nuts (with non-metallic insert). Property classes 5, 8 and 10 |
DIN EN 493:1992-07 | FASTENERS - SURFACE DISCONTINUITIES - NUTS |
DIN EN ISO 898-2:2012-08 | Mechanical properties of fasteners made of carbon steel and alloy steel - Part 2: Nuts with specified property classes - Coarse thread and fine pitch thread (ISO 898-2:2012) |
ASME B18.16M : 2004 | PREVAILING-TORQUE-TYPE STEEL METRIC HEX NUTS AND HEX FLANGE NUTS |
ASME B18.16M : 2004 : R2009 | PREVAILING-TORQUE-TYPE STEEL METRIC HEX NUTS AND HEX FLANGE NUTS |
ASME B18.16M : 2004 : R2016 | PREVAILING-TORQUE-TYPE STEEL METRIC HEX NUTS AND HEX FLANGE NUTS |
ISO 16047:2005 | Fasteners — Torque/clamp force testing |
ISO 898-2:2012 | Mechanical properties of fasteners made of carbon steel and alloy steel — Part 2: Nuts with specified property classes — Coarse thread and fine pitch thread |
ISO 965-2:1998 | ISO general purpose metric screw threads — Tolerances — Part 2: Limits of sizes for general purpose external and internal screw threads — Medium quality |
ISO 262:1998 | ISO general purpose metric screw threads — Selected sizes for screws, bolts and nuts |
ISO 68-1:1998 | ISO general purpose screw threads — Basic profile — Part 1: Metric screw threads |
ISO 273:1979 | Fasteners — Clearance holes for bolts and screws |
ISO 261:1998 | ISO general purpose metric screw threads General plan |
ISO 898-1:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.