ISO 3040:2016
Current
The latest, up-to-date edition.
Geometrical product specifications (GPS) Dimensioning and tolerancing Cones
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
English, French
04-11-2016
ISO 3040:2016 specifies graphical indication applicable to a cone (right-angle circular cones) to define its dimensioning or to specify its tolerancing.
For the purposes of this International Standard, the term "cone" relates to right-angle circular cones only (any intersection by a plane perpendicular to the axis of the nominal cone is a circle).
NOTE 1 For simplicity, only truncated cones have been represented in this International Standard. However, this International Standard can be applied to any type of cone within its scope.
NOTE 2 This International Standard is not intended to prevent the use of other methods of dimensioning and tolerancing.
DevelopmentNote |
Supersedes ISO/DIS 3040. (04/2016)
|
DocumentType |
Standard
|
Pages |
24
|
PublisherName |
International Organization for Standardization
|
Status |
Current
|
Supersedes |
Standards | Relationship |
UNI EN ISO 3040:2016 | Identical |
DIN EN ISO 3040:2016-12 | Identical |
NF EN ISO 3040 : 2016 | Identical |
NBN EN ISO 3040 : 2016 | Identical |
NEN EN ISO 3040 : 2016 | Identical |
NS EN ISO 3040 : 2016 | Identical |
PN EN ISO 3040 : 2016 | Identical |
SN EN ISO 3040 : 2016 | Identical |
UNE-EN ISO 3040:2016 | Identical |
BS EN ISO 3040:2016 | Identical |
EN ISO 3040:2016 | Identical |
DIN EN ISO 3040:2012-06 | Identical |
IS 10718 : 2021 | Identical |
NFE 04 557 : 1991 | Similar to |
NEN ISO 3040 : 2009 | Identical |
PN 93/M-01149 : 1993 | Identical |
NBN E 04 005 : 1978 | Identical |
UNE 1122:1996 | Identical |
I.S. EN ISO 3040:2016 | Identical |
UNI EN ISO 3040 : 2012 | Identical |
UNI ISO 3040 : 1993 | Identical |
BS EN ISO 2538-2:2014 | Geometrical product specifications (GPS). Wedges Dimensioning and tolerancing |
15/30321493 DC : 0 | BS ISO 129-1 - TECHNICAL PRODUCT DOCUMENTATION (TPD) - INDICATION OF DIMENSIONS AND TOLERANCES - PART 1: GENERAL PRINCIPLES |
07/30164614 DC : 0 | BS EN 15546-2 - SMALL BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 2: CONNECTORS FOR RESPIRATORY APPLICATIONS |
ISO 80369-6:2016 | Small bore connectors for liquids and gases in healthcare applications — Part 6: Connectors for neuraxial applications |
UNE-EN ISO 80369-7:2017 | Small-bore connectors for liquids and gases in healthcare applications - Part 7: Connectors for intravascular or hypodermic applications (ISO 80369-7:2016, Corrected version 2016-12-01) |
CSA ISO 5356-1 : 2015 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - CONICAL CONNECTORS - PART 1: CONES AND SOCKETS |
BS ISO 1101:1983 | Technical drawings. Geometrical tolerancing. Tolerancing of form, orientation, location and run-out. Generalities, definitions, symbols, indications on drawings |
I.S. EN ISO 14638:2015 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - MATRIX MODEL (ISO 14638:2015) |
CSA Z5356-1 : 2008 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - CONICAL CONNECTORS - PART 1: CONES AND SOCKETS |
CSA Z5356-1 : 2008 : R2013 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - CONICAL CONNECTORS - PART 1: CONES AND SOCKETS |
I.S. EN 15546-1:2008 | SMALL BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 1: GENERAL REQUIREMENTS |
I.S. EN ISO 14405-2:2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 2: DIMENSIONS OTHER THAN LINEAR SIZES (ISO 14405-2:2011) |
AAMI CN6 : 2015 | SMALL-BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 6: CONNECTORS FOR NEURAXIAL APPLICATIONS |
UNE-EN ISO 80369-6:2016 | Small bore connectors for liquids and gases in healthcare applications - Part 6: Connectors for neuraxial applications (ISO 80369-6:2016, Corrected version 2016-11-15) |
UNE-EN ISO 2538-2:2015 | Geometrical product specifications (GPS) - Wedges - Part 2: Dimensioning and tolerancing (ISO 2538-2:2014) |
UNE-EN ISO 14405-2:2015 | Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear sizes (ISO 14405-2:2011) |
EN ISO 14638:2015 | Geometrical product specifications (GPS) - Matrix model (ISO 14638:2015) |
DIN EN ISO 1101:2017-09 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - TOLERANCES OF FORM, ORIENTATION, LOCATION AND RUN-OUT (ISO 1101:2017) |
EN ISO 5356-1:2015 | Anaesthetic and respiratory equipment - Conical connectors - Part 1: Cones and sockets (ISO 5356-1:2015) |
DIN EN ISO 2538-1 E : 2015 | GEOMETRICAL PRODUCT SPECFICATIONS (GPS) - WEDGES - PART 1: SERIES OF ANGLES AND SLOPES (ISO 2538-1:2014) |
I.S. EN ISO 80369-6:2016 | SMALL BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 6: CONNECTORS FOR NEURAXIAL APPLICATIONS (ISO/IEC/DIS 80369-6:2014) |
DIN EN 15546-1:2008-08 | SMALL BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 1: GENERAL REQUIREMENTS |
EN ISO 80369-6 : 2016 COR 2016 | SMALL BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 6: CONNECTORS FOR NEURAXIAL APPLICATIONS (ISO 80369-6:2016, CORRECTED VERSION 2016-11-15) |
UNI EN ISO 2538-1 : 2014 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - WEDGES - PART 1: SERIES OF ANGLES AND SLOPES |
15/30288418 DC : 0 | BS EN ISO 80369-2 - SMALL BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 2: CONNECTORS FOR BREATHING SYSTEMS AND DRIVING GASES APPLICATIONS |
14/30292519 DC : 0 | BS EN 80369-5 ED 1.0 - SMALL-BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 5: CONNECTORS FOR LIMB CUFF INFLATION APPLICATIONS |
12/30259708 DC : 0 | BS EN ISO 5356-1 - ANAESTHETIC AND RESPIRATORY EQUIPMENT - CONICAL CONNECTORS - PART 1: CONES AND SOCKETS (ISO/DIS 5356-1:2012) |
BS EN ISO 2538-1:2014 | Geometrical product specifications (GPS). Wedges Series of angles and slopes |
12/30246960 DC : 0 | BS EN ISO 2538-2 - GEOMETRICAL PRODUCT SPECIFICATIONS - WEDGES - PART 2: DIMENSIONING AND TOLERANCING |
PREN ISO 5356-1 : DRAFT 2012 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - CONICAL CONNECTORS - PART 1: CONES AND SOCKETS (ISO/DIS 5356-1:2012) |
BS ISO 12164-1:2001 | Hollow taper interface with flange contact surface Shanks. Dimensions |
AAMI ISO 5356-1 : 2004 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - CONICAL CONNECTORS - PART 1: CONES AND SOCKETS |
UNE-EN ISO 2538-1:2015 | Geometrical product specifications (GPS) - Wedges - Part 1: Series of angles and slopes (ISO 2538-1:2014) |
NF ISO 128-1 : 2003 | TECHNICAL DRAWINGS - GENERAL PRINCIPLES OF PRESENTATION - PART 1: INTRODUCTION AND INDEX |
BS EN ISO 14405-2:2011 | Geometrical product specifications (GPS). Dimensional tolerancing Dimensions other than linear sizes |
EN ISO 14405-2:2011 | Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear sizes (ISO 14405-2:2011) |
DIN EN ISO 14405-2:2012-03 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 2: DIMENSIONS OTHER THAN LINEAR SIZES (ISO 14405-2:2011) |
BS EN ISO 80369-6:2016 | Small bore connectors for liquids and gases in healthcare applications Connectors for neuraxial applications |
I.S. EN ISO 1119:2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SERIES OF CONICAL TAPERS AND TAPER ANGLES (ISO 1119:2011) |
I.S. EN ISO 5356-1:2015 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - CONICAL CONNECTORS - PART 1: CONES AND SOCKETS (ISO 5356-1:2015) |
I.S. EN ISO 1101:2017 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - TOLERANCES OF FORM, ORIENTATION, LOCATION AND RUN-OUT (ISO 1101:2017) |
BS 308-1:1984 | Engineering drawing practice Recommendations for general principles |
BS 308-2:1985 | Engineering drawing practice Recommendations for dimensioning and tolerancing of size |
BS 308-3:1990 | Engineering drawing practice Recommendations for geometrical tolerancing |
DIN ISO 12164-4 E : 2016 | HOLLOW TAPER INTERFACE WITH FLANGE CONTACT SURFACE - PART 4: DIMENSIONS OF RECEIVERS FOR STATIONARY TOOLS (ISO 12164-4:2014) |
DIN EN ISO 2538-2:2015-01 | Geometrical product specifications (GPS) - Wedges - Part 2: Dimensioning and tolerancing (ISO 2538-2:2014) |
BS EN ISO 80369-7:2017 | Small-bore connectors for liquids and gases in healthcare applications Connectors for intravascular or hypodermic applications |
07/30166156 DC : 0 | BS ISO 12164-3 - HOLLOW TAPER INTERFACE WITH FLANGE CONTACT SURFACE - PART 3: DIMENSIONS OF SHANKS FOR STATIONARY TOOLS |
UNI EN ISO 2538-2 : 2014 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - WEDGES - PART 2: DIMENSIONING AND TOLERANCING |
BS ISO 12164-4:2014 | Hollow taper interface with flange contact surface Dimensions of receivers for stationary tools |
BS ISO 12164-2:2001 | Hollow taper interface with flange contact surface Receivers. Dimensions |
DIN EN ISO 14638 E : 2015 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - MATRIX MODEL (ISO 14638:2015) |
07/30166159 DC : 0 | BS ISO 12164-4 - HOLLOW TAPER INTERFACE WITH FLANGE CONTACT SURFACE - PART 4: DIMENSIONS OF RECEIVERS FOR STATIONARY TOOLS |
DIN EN ISO 2538-1:2015-01 | GEOMETRICAL PRODUCT SPECFICATIONS (GPS) - WEDGES - PART 1: SERIES OF ANGLES AND SLOPES; (ISO 2538-1:2014) |
BS EN 15546-1:2008 | Small bore connectors for liquids and gases in healthcare applications General requirements |
BS ISO 12164-3:2014 | Hollow taper interface with flange contact surface Dimensions of shanks for stationary tools |
UNE-EN 80369-5:2017 | Small-bore connectors for liquids and gases in healthcare applications - Part 5: Connectors for limb cuff inflation applications |
I.S. EN 80369-5:2016 | SMALL-BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 5: CONNECTORS FOR LIMB CUFF INFLATION APPLICATIONS |
DIN ISO 12164-3 E : 2016 | HOLLOW TAPER INTERFACE WITH FLANGE CONTACT SURFACE - PART 3: DIMENSIONS OF SHANKS FOR STATIONARY TOOLS (ISO 12164-3:2014) |
ANSI/AAMI/ISO 80369-7:2016 | SMALL-BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 7: CONNECTORS FOR INTRAVASCULAR OR HYPODERMIC APPLICATIONS |
UNI EN ISO 14405-2 : 2012 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 2: DIMENSIONS OTHER THAN LINEAR SIZES |
BS 4500-5:1988 | ISO limits and fits. Specification for system of cone tolerances for conical workpieces from $7IC$7R = 1:3 to 1:500 and lengths from 6 mm to 630 mm |
DIN EN ISO 5356-1:2015-06 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - CONICAL CONNECTORS - PART 1: CONES AND SOCKETS (ISO 5356-1:2015) |
ISO 128-24:2014 | Technical drawings General principles of presentation Part 24: Lines on mechanical engineering drawings |
UNI EN ISO 1119 : 2012 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SERIES OF CONICAL TAPERS AND TAPERS ANGLES |
EN 15546-1:2008 | Small bore connectors for liquids and gases in healthcare applications - Part 1 - General Requirements |
UNI CEI EN 15546-1 : 2009 | SMALL BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 1: GENERAL REQUIREMENTS |
BS 4500-4:1985 | ISO limits and fits Specification for system of cone (taper) fits for cones from <i>C</i>=1:3 to 1:500, lengths from 6 mm to 630 mm and diameters up to 500 mm |
DIN EN ISO 14638:2015-12 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - MATRIX MODEL (ISO 14638:2015) |
BS EN ISO 14638:2015 | Geometrical product specifications (GPS). Matrix model |
12/30246945 DC : 0 | BS EN ISO 2538-1 - GEOMETRICAL PRODUCT SPECIFICATIONS - WEDGES - PART 1: SERIES OF ANGLES AND SLOPES |
I.S. EN ISO 2538-2:2014 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - WEDGES - PART 2: DIMENSIONING AND TOLERANCING (ISO 2538-2:2014) |
DIN EN ISO 2538-2 E : 2015 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - WEDGES - PART 2: DIMENSIONING AND TOLERANCING (ISO 2538-2:2014) |
DIN ISO 12164-4:2016-10 | HOLLOW TAPER INTERFACE WITH FLANGE CONTACT SURFACE - PART 4: DIMENSIONS OF RECEIVERS FOR STATIONARY TOOLS (ISO 12164-4:2014) |
ANSI/AAMI/ISO 80369-6:2016 | SMALL-BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 6: CONNECTORS FOR NEURAXIAL APPLICATIONS |
I.S. EN ISO 2538-1:2014 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - WEDGES - PART 1: SERIES OF ANGLES AND SLOPES (ISO 2538-1:2014) |
ISO 129-1:2018 | Technical product documentation (TPD) — Presentation of dimensions and tolerances — Part 1: General principles |
UNI ISO 129-1 : 2011 | TECHNICAL DRAWINGS - INDICATION OF DIMENSIONS AND TOLERANCES - PART 1: GENERAL PRINCIPLES |
ISO 14405-2:2011 | Geometrical product specifications (GPS) Dimensional tolerancing Part 2: Dimensions other than linear sizes |
ISO 12164-2:2001 | Hollow taper interface with flange contact surface — Part 2: Receivers — Dimensions |
ISO 12164-1:2001 | Hollow taper interface with flange contact surface — Part 1: Shanks — Dimensions |
BS EN ISO 1101:2017 | Geometrical product specifications (GPS). Geometrical tolerancing. Tolerances of form, orientation, location and run-out |
ISO 1119:2011 | Geometrical product specifications (GPS) — Series of conical tapers and taper angles |
ISO 128-1:2003 | Technical drawings General principles of presentation Part 1: Introduction and index |
ISO 80369-7:2016 | Small-bore connectors for liquids and gases in healthcare applications Part 7: Connectors for intravascular or hypodermic applications |
ISO 2538-1:2014 | Geometrical product specifications (GPS) Wedges Part 1: Series of angles and slopes |
ISO 129:1985 | Technical drawings Dimensioning General principles, definitions, methods of execution and special indications |
ISO 14638:2015 | Geometrical product specifications (GPS) Matrix model |
ISO 5356-1:2015 | Anaesthetic and respiratory equipment Conical connectors Part 1: Cones and sockets |
ISO 2538-2:2014 | Geometrical product specifications (GPS) Wedges Part 2: Dimensioning and tolerancing |
BS EN ISO 5356-1:2015 | Anaesthetic and respiratory equipment. Conical connectors Cones and sockets |
DIN EN 80369-5:2017-10 | SMALL-BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 5: CONNECTORS FOR LIMB CUFF INFLATION APPLICATIONS (IEC 80369-5:2016 + COR.1:2017) |
EN ISO 1101:2017 | Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2017) |
EN ISO 1119:2011 | Geometrical product specifications (GPS) - Series of conical tapers and taper angles (ISO 1119:2011) |
EN ISO 2538-1:2014 | Geometrical product specifications (GPS) - Wedges - Part 1: Series of angles and slopes (ISO 2538-1:2014) |
EN ISO 2538-2:2014 | Geometrical product specifications (GPS) - Wedges - Part 2: Dimensioning and tolerancing (ISO 2538-2:2014) |
ISO 12164-3:2014 | Hollow taper interface with flange contact surface — Part 3: Dimensions of shanks for stationary tools |
DIN EN 80369-5 E : 2017 | SMALL-BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 5: CONNECTORS FOR LIMB CUFF INFLATION APPLICATIONS (IEC 80369-5:2016 + COR.1:2017) |
ASTM F 1054 : 2001 | Standard Specification for Conical Fittings (Withdrawn 2005) |
BS ISO 128-24:2014 | Technical drawings. General principles of presentation Lines on mechanical engineering drawings |
ISO 12164-4:2014 | Hollow taper interface with flange contact surface — Part 4: Dimensions of receivers for stationary tools |
13/30255554 DC : 0 | BS EN ISO 80369-7 - SMALL BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 7: CONNECTORS WITH 6% (LUER) TAPER FOR INTRAVASCULAR OR HYPODERMIC APPLICATIONS |
EN ISO 80369-7:2017 | Small-bore connectors for liquids and gases in healthcare applications - Part 7: Connectors for intravascular or hypodermic applications (ISO 80369-7:2016, Corrected version 2016-12-01) |
ANSI/AAMI/ISO 80369-5:2016 | SMALL-BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 5: CONNECTORS FOR LIMB CUFF INFLATION APPLICATIONS |
10/30200334 DC : 0 | BS ISO 129-1 - TECHNICAL DRAWINGS - INDICATION OF DIMENSIONS AND TOLERANCES - PART 1: GENERAL PRINCIPLES |
DIN EN ISO 80369-7 E : 2017 | SMALL-BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 7: CONNECTORS FOR INTRAVASCULAR OR HYPODERMIC APPLICATIONS (ISO 80369-7:2016, CORRECTED VERSION 2016-12-01) |
10/30209612 DC : 0 | BS ISO 1119 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SERIES OF CONICAL TAPERS AND TAPER ANGLES |
14/30288421 DC : 0 | BS EN ISO/IEC 80369-6 - SMALL BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 6: CONNECTORS FOR NEURAXIAL APPLICATIONS |
DIN ISO 128-24:1999-12 | TECHNICAL DRAWINGS - GENERAL PRINCIPLES OF PRESENTATION - PART 24: LINES ON MECHANICAL ENGINEERING DRAWINGS |
BS ISO 129:1985 | Technical drawings. Dimensioning. General principles, definitions, methods of execution and special indications |
13/30286393 DC : 0 | BS ISO 12164-4 - HOLLOW TAPER INTERFACE WITH FLANGE CONTACT SURFACE - PART 4: DIMENSIONS OF RECEIVERS FOR STATIONARY TOOLS |
13/30286389 DC : 0 | BS ISO 12164-3 - HOLLOW TAPER INTERFACE WITH FLANGE CONTACT SURFACE - PART 3: DIMENSIONS OF SHANKS FOR STATIONARY TOOLS |
13/30240527 DC : 0 | BS ISO 129-2 - TECHNICAL PRODUCT DOCUMENTATION - INDICATION OF DIMENSIONS AND TOLERANCES - PART 2: DIMENSIONING OF MECHANICAL ENGINEERING DRAWINGS |
PREN ISO 1119 : DRAFT 2010 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SERIES OF CONICAL TAPERS AND TAPER ANGLES |
I.S. EN ISO 80369-7:2017 COR 2017 | SMALL-BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 7: CONNECTORS FOR INTRAVASCULAR OR HYPODERMIC APPLICATIONS (ISO 80369-7:2016, CORRECTED VERSION 2016-12-01) |
DIN 406-10:1992-12 | TECHNICAL DRAWINGS; DIMENSIONING; DEFINITIONS, GENERAL PRINCIPLES |
DIN EN ISO 1119:2012-04 | Geometrical product specifications (GPS) - Series of conical tapers and taper angles (ISO 1119:2011) |
ISO 1101:2017 | Geometrical product specifications (GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out |
UNE-EN ISO 5356-1:2015 | Anaesthetic and respiratory equipment - Conical connectors - Part 1: Cones and sockets (ISO 5356-1:2015) |
UNE-EN ISO 1119:2012 | Geometrical product specifications (GPS) - Series of conical tapers and taper angles (ISO 1119:2011) |
BS EN ISO 1119:2011 | Geometrical product specifications (GPS). Series of conical tapers and taper angles |
DIN EN ISO 80369-7:2017-10 | Small-bore connectors for liquids and gases in healthcare applications - Part 7: Connectors for intravascular or hypodermic applications (ISO 80369-7:2016, Corrected version 2016-12-01) |
DIN ISO 12164-3:2016-10 | HOLLOW TAPER INTERFACE WITH FLANGE CONTACT SURFACE - PART 3: DIMENSIONS OF SHANKS FOR STATIONARY TOOLS (ISO 12164-3:2014) |
EN 15546-1 : 2008 | SMALL BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 1: GENERAL REQUIREMENTS |
ISO 8015:2011 | Geometrical product specifications (GPS) Fundamentals Concepts, principles and rules |
ISO 14638:2015 | Geometrical product specifications (GPS) Matrix model |
ISO 1119:2011 | Geometrical product specifications (GPS) — Series of conical tapers and taper angles |
ISO 14253-1:2017 | Geometrical product specifications (GPS) — Inspection by measurement of workpieces and measuring equipment — Part 1: Decision rules for verifying conformity or nonconformity with specifications |
ISO 81714-1:2010 | Design of graphical symbols for use in the technical documentation of products Part 1: Basic rules |
ISO 14405-1:2016 | Geometrical product specifications (GPS) — Dimensional tolerancing — Part 1: Linear sizes |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.