MIL-STD-690 Revision D:2005
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Failure Rate (FR) Sampling Plans and Procedures
Available format(s)
PDF
Superseded date
05-18-2021
Language(s)
English
Published date
06-10-2005
Publisher
1. SCOPE
2. APPLICABLE DOCUMENTS
3. DEFINITIONS
4. GENERAL REQUIREMENTS
5. DETAILED REQUIREMENTS
6. NOTES
APPENDIX A - GUIDANCE FOR SPECIFICATION WRITERS
CONCLUDING MATERIAL
Describes the procedures for failure rate (FR) qualification, sampling plans for establishing and maintaining FR levels at selected confidence levels, and lot conformance inspection procedures associated with FR testing for the purpose of direct reference in appropriate military electronic parts established reliability (ER) specifications.
This standard provides procedures for Failure Rate (FR) qualification, sampling plans for establishing and maintaining FR levels at selected confidence levels, and lot conformance inspection procedures associated with FR testing for the purpose of direct reference in appropriate military electronic parts Established Reliability (ER) specifications. Figures and tables throughout this standard are based on exponential distribution. Weibull distribution will be acceptable in certain components such as capacitors. Use of Weibull distribution for any component must be approved by the qualifying activity. This standard also provides guidance to specification writers in the use of this standard (see appendix A) and references material for users of ER parts.
| DevelopmentNote |
Supersedes MIL PRF 23269/3 (G) & MIL PRF 23269/4 (G). (04/2012)
|
| DocumentType |
Standard
|
| Pages |
87
|
| ProductNote |
NEW CHILD NOT 2 2018 IS NOW ADDED.
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Superseded
|
| Supersedes |
| DSCC 06003 : C | RESISTOR, CHIP, FIXED, POWER METAL STRIP, SURFACE MOUNT, LOW VALUE (2 WATT), STYLE 4527 |
| DSCC 94016 : L | RESISTOR, CHIP, FIXED, FILM, MOISTURE RESISTANT, MILITARY AND SPACE LEVEL, STYLE 1206 |
| DSCC 09008 : A | RESISTOR, FIXED, WIREWOUND, (ACCURATE), RADIAL LEADED, 0.1 WATT (RBR81) |
| MIL-PRF-32140 Base Document:2004 | RELAYS, ELECTROMAGNETIC, RADIO FREQUENCY, ESTABLISHED RELIABILITY, - GENERAL SPECIFICATION FOR |
| MIL C 39010 : D | COIL, FIXED, RADIOFREQUENCY, MOLDED, ESTABLISHED RELIABILITY GENERAL SPECIFICATION FOR |
| DSCC 04009 : E | RESISTOR, CHIP, FIXED, FILM, MOISTURE RESISTANT, MILITARY AND SPACE LEVEL, STYLE 0603 |
| DSCC 12011 : 0 | RESISTOR, CHIP, FIXED, FILM, VALUES LESS THAN 1 OHM, STYLE 1010 |
| GEIA TA HB 0009 : 2013 | RELIABILITY PROGRAM HANDBOOK |
| MIL-R-39008 Revision C:1990 | RESISTOR, FIXED, COMPOSITION (INSULATED), ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
| DSCC 14007 : 0 | RESISTOR, FIXED, WIREWOUND, (ACCURATE), 0.25 WATT (RBR54) |
| MIL-PRF-39035 Revision E:2008 | Resistor, Variable, Nonwirewound (Adjustment Type), Nonestablished Reliability, and Established Reliability, General Specification for |
| MIL C 39003 : H | CAPACITOR, FIXED, ELECTROLYTIC (SOLID ELECTROLYTE) TANTALUM, ESTABLISHED RELIABILITY GENERAL SPECIFICATION FOR |
| DSCC 01002 : G | RESISTOR, FIXED, FILM, CHIP, 1.5 WATT (MELF), FLAT CERAMIC PACKAGE, STYLE 2512 |
| MIL C 55681 : D SUPP 1 | CAPACITOR, CHIP, MULTIPLE LAYER, FIXED UNENCAPSULATED, CERAMIC DIELECTRIC, ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
| MIL-PRF-39009 Revision E:2004 | RESISTOR, FIXED, WIREWOUND, (POWER TYPE, CHASSIS MOUNTED), NONESTABLISHED RELIABILITY, ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
| DSCC 07025 : C | RESISTOR, CHIP, FIXED, BULK METAL FOIL, ULTRA PRECISION, STYLE 1206 |
| DSCC 95011 : G | RESISTOR, FIXED, FILM, CHIP (MELF), 1/8 WATT, STYLE 1206 |
| DSCC 93078 : D#INA | RESISTORS, CHIP, FIXED, BULK METAL FOIL, ULTRA PRECISION, STYLE 2110 |
| DSCC 10006 : A | RESISTOR, CURRENT SENSE, OPEN AIR, STANDARD LEADS, 1 WATT |
| DSCC 10007 : A | RESISTOR, CURRENT SENSE, OPEN AIR, STANDARD LEADS, 3 WATT |
| DSCC 03027 : A | RESISTOR, CHIP, FIXED, FILM, HIGH VOLTAGE, STYLE 2512 |
| DSCC 06009 : A | RESISTOR, CHIP, FIXED, POWER METAL STRIP, SURFACE MOUNT, LOW VALUE (.25 WATT), STYLE 1206 |
| MIL-PRF-914 Revision C:2008 | RESISTOR NETWORK, FIXED, FILM, SURFACE MOUNT, NONESTABLISHED RELIABILITY, AND ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
| DSCC 12014A:2021 | RESISTOR, CHIP, FIXED, FILM, VALUES LESS THAN 1 OHM, STYLE 0201 |
| DSCC 12005A:2021 | RESISTOR, CHIP, FIXED, FILM, VALUES LESS THAN 1 OHM, STYLE 1005 |
| DSCC 12007A:2021 | RESISTOR, CHIP, FIXED, FILM, VALUES LESS THAN 1 OHM, STYLE 2208 |
| DSCC 02010G:2021 | RESISTOR, CHIP, FIXED, FILM, VALUES LESS THAN 1 OHM, STYLE 1206 |
| DSCC 12011A:2021 | RESISTOR, CHIP, FIXED, FILM, VALUES LESS THAN 1 OHM, STYLE 1010 |
| DSCC 12012A:2021 | RESISTOR, CHIP, FIXED, FILM, VALUES LESS THAN 1 OHM, STYLE 0402 |
| DSCC 12003A:2021 | RESISTOR, CHIP, FIXED, FILM, VALUES LESS THAN 1 OHM, STYLE 0502 |
| DSCC 12009A:2021 | RESISTOR, CHIP, FIXED, FILM, VALUES LESS THAN 1 OHM, STYLE 2010 |
| DSCC 12004B:2021 | RESISTOR, CHIP, FIXED, FILM, VALUES LESS THAN 1 OHM, STYLE 0505 |
| MIL-PRF-39017 Revision G:2006 | RESISTOR, FIXED, FILM (INSULATED), NONESTABLISHED RELIABILITY, AND ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
| MIL-PRF-39003 Revision N:2016 | Capacitor, Fixed, Electrolytic (Solid Electrolyte), Tantalum, Established Reliability, General Specification for |
| MIL-PRF-55681 Revision G:2016 | CAPACITOR, CHIP, MULTIPLE LAYER, FIXED, CERAMIC DIELECTRIC, ESTABLISHED RELIABILITY AND NON-ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
| MIL-PRF-55342 Revision H:2003 | RESISTOR, CHIP, FIXED, FILM, NONESTABLISHED RELIABILITY, ESTABLISHED RELIABILITY, SPACE LEVEL, GENERAL SPECIFICATION FOR |
| BS EN 100014:1992 | Harmonized system of quality assessment for electronic components. Basic specification: CECC assessed process average procedure (60% confidence limit) |
| DSCC 12013 : 0 | RESISTOR, CHIP, FIXED, FILM, VALUES LESS THAN 1 OHM, STYLE 0302 |
| DSCC 15003 : 0 | RESISTOR, FIXED, WIREWOUND, (ACCURATE), 0.15 WATT (RBR55) |
| DSCC 95006 : H | RESISTOR, FIXED, FILM, CHIP (MELF), 1 WATT, STYLE 2512 |
| DSCC 94048 : H | RESISTOR, FIXED, FILM, CHIP (MELF), 1/2 WATT, STYLE 2010 |
| DSCC 12012 : 0 | RESISTOR, CHIP, FIXED, FILM, VALUES LESS THAN 1 OHM, STYLE 0402 |
| DSCC 87126 : J | RESISTOR, VARIABLE, NONWIRE-WOUND (ADJUSTMENT TYPE, LEAD SCREW ACTUATED) |
| MIL-PRF-55182 Revision J:2017 | RESISTOR, FIXED, FILM, NONESTABLISHED RELIABILITY, ESTABLISHED RELIABILITY, AND SPACE LEVEL, GENERAL SPECIFICATION FOR |
| DSCC 03022 : C | RESISTOR, CHIP, FIXED, FILM, VALUES LESS THAN 1 OHM, STYLE 0603 |
| DSCC 10010 : A | RESISTOR, CURRENT SENSE, OPEN AIR, METAL ALLOY STRIP, 5 WATTS |
| DSCC 02008 : B#IINA | RESISTOR, CHIP, FIXED, FILM, LOW AND HIGH VALUES, STYLE 1206 |
| DSCC 06021 : D | RESISTOR, FIXED, BULK METAL FOIL, HIGH PRECISION, SURFACE MOUNT, MOLDED 0.6/.4 WATTS |
| DSCC 09004 : 0 | RESISTOR, CHIP, FIXED, FILM, PRECISION, TOP CONTACT, STYLE 2020 |
| DSCC 12010 : 0 | RESISTOR, CHIP, FIXED, FILM, VALUES LESS THAN 1 OHM, STYLE 2512 |
| DSCC 11007 : 0 | RESISTORS, CHIP, FIXED, CURRENT SENSE, ULTRA PRECISION, STYLE 1206 |
| DSCC 10008 : A | RESISTOR, CURRENT SENSE, OPEN AIR, STANDARD LEADS, 5 WATT |
| MIL-HDBK-115 Revision C:2016 | U.S. ARMY REVERSE ENGINEERING HANDBOOK (GUIDELINES AND PROCEDURES) |
| DSCC 01032 : C | RESISTOR, CHIP, FIXED, FILM, BERYLLIA SUBSTRATE, HIGH POWER, STYLE 1206 |
| DSCC 06001 : F | RESISTOR, CHIP, FIXED, BULK METAL FOIL, ULTRA PRECISION, STYLE 2010 |
| DSCC 94025 : K | RESISTOR, CHIP, FIXED, FILM, MOISTURE RESISTANT, MILITARY AND SPACE LEVEL, STYLE 0502 |
| MIL-S-83490-2 Base Document:1974 | SPECIFICATION, TYPES AND FORMS, MILITARY (OS) SERIES |
| MIL R 55342 : C | RESISTORS, FIXED, FILM, CHIP, ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
| DSCC 97008 : C#CAN | RESISTOR, FIXED, FILM, CHIP (MELF), 1/4 WATT, STYLE 0204 |
| DSCC 01033 : B | RESISTOR, FIXED, FILM, CHIP, VOLTAGE DIVIDER, STYLE 1206 |
| DSCC 06006 : B | RESISTOR, CHIP, FIXED, POWER METAL STRIP, SURFACE MOUNT, LOW VALUE (3 WATT), STYLE 4527 |
| DSCC 04007 : D | RESISTOR, CHIP, FIXED, FILM, MOISTURE RESISTANT, MILITARY AND SPACE LEVEL, STYLE 0302 |
| DSCC 12003 : 0 | RESISTOR, CHIP, FIXED, FILM, VALUES LESS THAN 1 OHM, STYLE 0502 |
| MIL C 23269 : E | CAPACITORS, FIXED, GLASS DIELECTRIC, ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
| DSCC 12004 : A | RESISTOR, CHIP, FIXED, FILM, VALUES LESS THAN 1 OHM, STYLE 0505 |
| DSCC 07010 : D | RESISTOR, CHIP, FIXED, FILM, MOISTURE RESISTANT, MILITARY AND SPACE LEVEL, STYLE 0201 |
| MIL-PRF-49464 Revision C:2009 | CAPACITOR, CHIP, SINGLE LAYER, FIXED, PARALLEL PLATE, CERAMIC DIELECTRIC, ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
| DSCC 87011 : F | RESISTOR, CHIP, FIXED, FILM, ZERO OHM, STYLE 1010 |
| MIL C 39018 : C | CAPACITORS, FIXED, ELECTROLYTIC (ALUM. OXIDE), ESTABLISHED RELIABILITY AND NON- ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
| MIL-C-39018-8 Revision B:1991 | CAPACITORS, FIXED, ELECTROLYTIC (ALUMINUM OXIDE), (POLARIZED), NON-ESTABLISHED RELIABILITY AND ESTABLISHED RELIABILITY, STYLES CU01 (INSULATED) AND CUR01 (INSULATED) |
| MIL R 39005 : D | RESISTOR, FIXED, WIREWOUND, (ACCURATE), ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
| MIL C 39014 : E | CAPACITOR, FIXED, CERAMIC DIELECTRIC (GENERAL PURPOSE) ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
| MIL-PRF-39022 Revision J:2015 | Capacitor, Fixed, Metallized, Paper-Plastic Film or Plastic Film Dielectric, Direct and Alternating Current, (Hermetically Sealed in Metal or Ceramic Cases), Established Reliability, General Specification for |
| MIL C 39006 : E | CAPACITORS, FIXED, ELECTROLYTIC (NONSOLID ELECTROLYTE), TANTALUM, ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
| DSCC 12014 : 0 | RESISTOR, CHIP, FIXED, FILM, VALUES LESS THAN 1 OHM, STYLE 0201 |
| MIL-S-83490-1 Base Document:1974 | SPECIFICATION, TYPES AND FORMS, NAVSEA XWS AND WS SERIES |
| DSCC 06020 : D | RESISTOR, FIXED, BULK METAL FOIL, HIGH PRECISION, SURFACE-MOUNT, MOLDED .25/.16 WATT |
| DSCC 07024 : C | RESISTOR, CHIP, FIXED, BULK METAL FOIL, ULTRA PRECISION, STYLE 0805 |
| DSCC 89040 : D | RESISTOR, FIXED, WIRE WOUND, SURFACE MOUNT, POWER TYPE (2.5 WATTS) |
| MIL-PRF-32560 Base Document:2016 | COIL, RADIO FREQUENCY, SURFACE MOUNT, FIXED ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
| IEC TR 62866:2014 | Electrochemical migration in printed wiring boards and assemblies - Mechanisms and testing |
| DSCC 06011 : C | RESISTOR, CHIP, FIXED, POWER METAL STRIP, SURFACE MOUNT, LOW VALUE (1.0 WATT), STYLE 2512 |
| DSCC 04008 : E | RESISTOR, CHIP, FIXED, FILM, MOISTURE RESISTANT, MILITARY AND SPACE LEVEL, STYLE 0402 |
| DSCC 08003 : A | RESISTOR, CHIP, FIXED, CURRENT SENSING, ULTRA PRECISION, STYLE 1625 |
| DSCC 15004 : A | RESISTOR, FIXED, WIREWOUND, (ACCURATE), 0.125 WATT (RBR71) |
| MIL-PRF-19978 Revision L:2016 | Capacitor, Fixed, Plastic (or Paper-Plastic) Dielectric (Hermetically Sealed in Metal, Ceramic or Glass Cases), Established and Non-Established Reliability, General Specification for |
| DSCC 94013 : J | RESISTOR, CHIP, FIXED, FILM, MOISTURE RESISTANT, MILITARY AND SPACE LEVEL, STYLE 1005 |
| MIL R 39015 : C (3) | RESISTOR, VARIABLE, WIRE WOUND (LEAD SCREW ACTUATED), ESTABLISHED RELIABILITY GENERAL SPECIFICATION FOR |
| DSCC 12005 : 0 | RESISTOR, CHIP, FIXED, FILM, VALUES LESS THAN 1 OHM, STYLE 1005 |
| MIL-PRF-39014 Revision J:2016 | Capacitor, Fixed, Ceramic Dielectric (General Purpose), Established Reliability and Non-Established Reliability, General Specification for |
| MIL C 11693 : C | CAPACITOR, FEED THROUGH, RADIO INTERFERENCE REDUCTION, DC (HERMETICALLY SEALED IN METALLIC CASE), STYLE CZ20 |
| DSCC 03010 : E | RESISTOR, FIXED, FILM, CHIP, SURFACE MOUNTED, ULTRA PRECISION, STYLE 1506 |
| MIL-R-28894 Base Document:1986 | RELAY, HYBRID OR SOLID STATE, SENSORS, ESTABLISHED RELIABILITY GENERAL SPECIFICATION FOR |
| MIL C 83421 : B | CAPACITOR, FIXED, SUPERMETALLIZED PLASTIC FILM DIELECTRIC, (DC, AC, OR DC AND AC) HERMETICALLY SEALED IN METAL CASES, ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
| MIL-PRF-87217 Revision A:1999 | CAPACITORS, FIXED, SUPERMETALLIZED PLASTIC FILM DIELECTRIC, DIRECT CURRENT FOR LOW ENERGY, HIGH IMPEDANCE APPLICATIONS, HERMETICALLY SEALED IN METAL CASES, HIGH RELIABILITY, GENERAL SPECIFICATION FOR |
| DSCC 94047 : H | RESISTOR, FIXED, FILM, CHIP (MELF), 2 WATT, STYLE 3610 |
| DSCC 16001 : 0 | RESISTOR, FIXED, WIREWOUND, (ACCURATE), 0.125 WATT (RBR75) |
| MIL R 39007 : G (3) SUPP 1A | RESISTORS, FIXED, WIRE-WOUND (POWER TYPE), NONESTABLISHED RELIABILITY, ESTABLISHED RELIABILITY, AND SPACE LEVEL, GENERAL SPECIFICATION FOR |
| DSCC 12009 : 0 | RESISTOR, CHIP, FIXED, FILM, VALUES LESS THAN 1 OHM, STYLE 2010 |
| DSCC 94014 : J | RESISTOR, CHIP, FIXED, FILM, MOISTURE RESISTANT, MILITARY AND SPACE LEVEL, STYLE 2208 |
| MIL-PRF-39005 Revision G:2013 | Resistor, Fixed, Wirewound (Accurate), Nonestablished Reliability, and Established Reliability, General Specification for |
| MIL R 83536 : SUPP 1 | RELAYS, ELECTROMAGNETIC, ESTABLISHED RELIABILITY |
| MIL-PRF-11693 Revision E:2012 | CAPACITOR, FEED THROUGH, RADIO-INTERFERENCE REDUCTION, DC (HERMETICALLY SEALED IN METAL CASES), ESTABLISHED AND NON-ESTABLISHED RELIABILITY GENERAL SPECIFICATION FOR |
| MIL-PRF-39001 Revision E:2009 | Capacitor, Fixed, MICA Dielectric, Established Reliability and Nonestablished Reliability, General Specification for |
| MIL-PRF-55514 Revision G:2013 | Capacitor, Fixed, Plastic (or Metallized Plastic) Dielectric, DC or DC-AC, in Nonmetal Cases, Non-Established and Established Reliability General Specification for |
| DSCC 93075 : F | RESISTOR, FIXED, WIREWOUND, SURFACE MOUNT, POWER TYPE (1/2 WATT) |
| MIL C 55514 : C | CAPACITOR, FIXED, PLASTIC (OR METALLIZED PLASTIC) DIELECTRIC, DC OR DC AC, IN NONMETAL CASES, ESTABLISHED RELIABILITY GENERAL SPECIFICATION FOR |
| MIL C 49467 : (2) SUPP 1 | CAPACITORS, FIXED, CERAMIC, MULTILAYER, HIGH VOLTAGE (GENERAL PURPOSE) ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
| DSCC 02001 : A | RESISTOR, FIXED, FILM, PRECISION, CHIP 1/8 WATT, STYLE 2012 |
| DSCC 12007 : 0 | RESISTOR, CHIP, FIXED, FILM, VALUES LESS THAN 1 OHM, STYLE 2208 |
| DSCC 93076 : J | RESISTOR, FIXED, WIREWOUND, SURFACE MOUNT, POWER TYPE (1 WATT) |
| MIL-R-874 Base Document:1990 | RESISTOR NETWORKS, FIXED, FILM, ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
| MIL C 49464 : A | CAPACITORS, CHIP, SINGLE LAYER, FIXED, PARALLEL PLATE, CERAMIC DIELECTRIC, ESTABLISHED RELIABILITY |
| MIL O 55310 : C | OSCILLATOR, CRYSTAL, GENERAL SPECIFICATION FOR |
| MIL-STD-1346 Revision C:1994 | RELAY, SELECTION AND APPLICATION |
| DSCC 94018 : J | RESISTOR, CHIP, FIXED, FILM, MOISTURE RESISTANT, MILITARY AND SPACE LEVEL, STYLE 2512 |
| DSCC 07002 : C | RESISTOR, FIXED, WIREWOUND, SURFACE MOUNT, POWER TYPE (3 WATT) |
| DSCC 93077 : G | RESISTOR, FIXED, WIREWOUND, SURFACE MOUNT, POWER TYPE (2 WATT) |
| DSCC 02010 : F | RESISTOR, CHIP, FIXED, FILM, VALUES LESS THAN 1 OHM, STYLE 1206 |
| DSCC 09002 : 0 | RESISTOR, FIXED, FILM, PRECISION, HIGH OHMIC VALUES |
| DSCC 93079 : D#INA | RESISTORS, FIXED, BULK METAL FOIL, CHIP, ULTRA PRECISION, STYLE 1505 |
| DSCC 06007 : A | RESISTOR, CHIP, FIXED, POWER METAL STRIP, SURFACE MOUNT, LOW VALUE (.1 WATT), STYLE 0603 |
| PD IEC/TR 62866:2014 | Electrochemical migration in printed wiring boards and assemblies. Mechanisms and testing |
| DSCC 06012 : A | RESISTOR, CHIP, FIXED, POWER METAL STRIP, SURFACE MOUNT, LOW VALUE (2.0 WATT), STYLE 2816 |
| DSCC 06010 : B | RESISTOR, CHIP, FIXED, POWER METAL STRIP, SURFACE MOUNT, LOW VALUE (.5 WATT), STYLE 2010 |
| MIL-PRF-83421 Revision F:2017 | CAPACITOR, FIXED, METALLIZED PLASTIC FILM DIELECTRIC, (DC, AC, OR DC AND AC), HERMETICALLY SEALED IN METAL CASES OR CERAMIC CASES, ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
| DSCC 94026 : J | RESISTOR, CHIP, FIXED, FILM, MOISTURE RESISTANT, MILITARY AND SPACE LEVEL, STYLE 1505 |
| MIL R 914 : 0 | RESISTOR NETWORKS, FIXED, FILM, SURFACE MOUNT, ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
| MIL-PRF-39016 Revision H:2017 | Relays, Electromagnetic, Established Reliability, General Specification for |
| MIL R 39035 : C (2) SUPP 1 | RESISTOR, VARIABLE, NONWIRE WOUND (ADJUSTMENT TYPE) ESTABLISHED RELIABILITY |
| DSCC 12006 : 0 | RESISTOR, CHIP, FIXED, FILM, VALUES LESS THAN 1 OHM, STYLE 1505 |
| MIL-PRF-28776 Revision H:2017 | Relays, Hybrid, Established Reliability, General Specification for |
| MIL-PRF-83536 Revision F:2017 | RELAYS, ELECTROMAGNETIC, ESTABLISHED RELIABILITY, 25 AMPERES AND BELOW, GENERAL SPECIFICATION FOR |
| DSCC 15002 : 0 | RESISTOR, FIXED, WIREWOUND, (ACCURATE), 0.33 WATT (RBR53) |
| DSCC 94017 : J | RESISTOR, CHIP, FIXED, FILM, MOISTURE RESISTANT, MILITARY AND SPACE LEVEL, STYLE 2010 |
| DSCC 93030 : F | RESISTOR, CHIP, FIXED, BULK METAL FOIL, ULTRA PRECISION, STYLE 2018 |
| MIL R 39009 : C (3) SUPP 1 | RESISTOR, FIXED, WIREWOUND (POWER TYPE, CHASSIS MOUNTED) ESTABLISHED RELIABILITY GENERAL SPECIFICATION FOR |
| DSCC 87026 : P | RESISTOR NETWORK, FIXED, FILM, 3-PIN |
| MIL-P-11268 Revision L:1983 | PART, MATERIALS, AND PROCESSES USED IN ELECTRONIC EQUIPMENT |
| DSCC 05009 : B | RESISTOR, FIXED, FILM, CHIP (MELF), 1/4 WATT, STYLE 0204 |
| DSCC 89039 : G | RESISTOR, FIXED, FILM, PRECISION |
| MIL C 39022 : E | CAPACITOR, FIXED, METALLIZED PAPER, PAPER-PLASTIC FILM, OR PLASTIC FILM DIELECTRIC DIRECT AND ALTERNATING CURRENT, HERMETICALLY SEALED IN METAL CASE) ESTABLISHED RELIABILITY, GEN. SPEC. FOR |
| MIL C 39001 : B | CAPACITOR, FIXED, MICA DIELECTRIC, ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR.. |
| DSCC 11008 : 0 | RESISTORS, CHIP, FIXED, CURRENT SENSE, ULTRA PRECISION, STYLE 2010 |
| MIL-PRF-39015 Revision E:2006 | RESISTOR, VARIABLE, WIREWOUND, (LEAD SCREW ACTUATED), NONESTABLISHED RELIABILITY, AND ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
| DSCC 14006 : 0 | RESISTOR, FIXED, WIREWOUND, (ACCURATE), 0.5 WATT (RBR52) |
| DSCC 88040 : F | RESISTOR, VARIABLE, SURFACE MOUNT, NONWIREWOUND, TRIMMER |
| MIL-PRF-39007 Revision J:2005 | Resistor, Fixed, Wirewound, (Power Type) Nonestablished Reliability, Established Reliability, and Space Level General Specification for |
| MIL-PRF-39006 Revision G:2006 | CAPACITOR, FIXED, ELECTROLYTIC (NONSOLID ELECTROLYTE), TANTALUM, ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
| MIL R 55182 : F | RESISTORS, FIXED, FILM, ESTABLISHED RELIABILITY GENERAL SPECIFICATION FOR |
| MIL-PRF-39010 Revision E:1997 | Coil, Radio Frequency, Fixed, Molded, Established Reliability and Nonestablished Reliability, General Specification for |
| MIL-PRF-39018 Revision G:2009 | CAPACITOR, FIXED, ELECTROLYTIC (ALUMINUM OXIDE), ESTABLISHED RELIABILITY AND NON-ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
| MIL C 55365 : C (5) | CAPACITOR, CHIP, FIXED, TANTALUM, ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
| MIL R 39017 : E (5) SUPP 1 | RESISTOR, FIXED, FILM (INSULATED) ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
| DSCC 06002 : F | RESISTOR, CHIP, FIXED, BULK METAL FOIL, ULTRA PRECISION, STYLE 2512 |
| MIL-PRF-32085 Base Document:2001 | RELAYS, ELECTROMAGNETIC, 270 V DC, ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
| MIL C 19978 : F | CAPACITORS, FIXED, PLASTIC (OR PAPER-PLASTIC) DIELECTRIC, (HERMETICALLY SEALED IN METAL, CERAMIC, OR GLASS CASES) ESTABLISHED AND NON-ESTABLISHED RELIABILITY - GENERAL SPECIFICATION FOR |
| DSCC 94015 : L | RESISTOR, CHIP, FIXED, FILM, MOISTURE RESISTANT, MILITARY AND SPACE LEVEL, STYLE 0705 |
| DSCC 11009 : 0 | RESISTORS, CHIP, FIXED, CURRENT SENSE, ULTRA PRECISION, STYLE 2512 |
| DSCC 96002 : C | RESISTOR, FIXED, FILM, INSULATED, LOW INDUCTANCE |
| DSCC 94011 : E | RESISTOR, CHIP, FIXED, FILM, ZERO-OHM, STYLE RM1206 |
| DSCC 14008 : A | RESISTOR, FIXED, WIREWOUND, (ACCURATE), 0.125 WATT (RBR56) |
| DSCC 12008 : 0 | RESISTOR, CHIP, FIXED, FILM, VALUES LESS THAN 1 OHM, STYLE 0705 |
| DSCC 03026 : A | RESISTOR, CHIP, FIXED, FILM, HIGH VOLTAGE, STYLE 2010 |
| DSCC 94012 : J | RESISTOR, CHIP, FIXED, FILM, MOISTURE RESISTANT, MILITARY AND SPACE LEVEL, STYLE 0505 |
| DSCC 94019 : J | RESISTOR, CHIP, FIXED, FILM, MOISTURE RESISTANT, MILITARY AND SPACE LEVEL, STYLE 1010 |
| DSCC 03025 : A | RESISTOR, CHIP, FIXED, FILM, HIGH VOLTAGE, STYLE 1206 |
| DSCC 06008 : A | RESISTOR, CHIP, FIXED, POWER METAL STRIP, SURFACE MOUNT, LOW VALUE (.125 WATT), STYLE 0805 |
| MIL-PRF-20 Revision N:2017 | CAPACITOR, FIXED, CERAMIC DIELECTRIC, (TEMPERATURE COMPENSATING), ESTABLISHED RELIABILITY AND NON-ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
| MIL PRF 55365 : 0012 | CAPACITOR, FIXED, ELECTROLYTIC (TANTALUM), CHIP, ESTABLISHED RELIABILITY, NON-ESTABLISHED RELIABILITY, AND HIGH RELIABILITY, GENERAL SPECIFICATION FOR |
| MIL-STD-790 Revision G:2011 | ESTABLISHED RELIABILITY AND HIGH RELIABILITY QUALIFIED PRODUCTS LIST (QPL) SYSTEMS FOR ELECTRICAL, ELECTRONIC, AND FIBER OPTIC PARTS SPECIFICATIONS |
| MIL-HDBK-217 Revision F:1991 | RELIABILITY PREDICTION OF ELECTRONIC EQUIPMENT |
US$20.00
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
PDF - English
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.