NF EN 10002-1 : 2001
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT AMBIENT TEMPERATURE
10-01-2009
01-12-2013
Avant-propos
1 Domaine d'application
2 Références normatives
3 Principe
4 Termes et définitions
5 Symboles et désignations
6 Éprouvette
6.1 Forme et dimensions
6.2 Types
6.3 Préparation des éprouvettes
7 Détermination de l'aire de la section initiale (So)
8 Marquage de la longueur initiale entre repères (Lo)
9 Exactitude de l'appareillage d'essai
10 Conditions d'exécution de l'essai
10.1 Méthode d'amarrage
10.2 Vitesse d'essai
11 Détermination de l'allongement pour cent après rupture (A)
12 Détermination de l'allongement total pour cent sous force
maximale (Agt)
13 Détermination de la limite conventionnelle d'élasticité (Rp)
14 Détermination de la limite d'extension (Rt)
15 Méthode de vérification de la limite d'allongement
rémanent (Rr)
16 Détermination du coefficient de striction (Z)
17 Rapport d'essai
Annexe A (informative) Recommandations relatives à
l'utilisation des machines d'essai de traction
assistées par ordinateur
Annexe B (normative) Types d'éprouvette à employer dans le
cas de produits minces: toles, feuillards et plats
d'épaisseur comprise entre 0,1 et 3 mm
Annexe C (normative) Types d'éprouvette à employer dans le
cas des fils, barres et profilés de diamètre ou
épaisseur inférieur à 4 mm
Annexe D (normative) Types d'éprouvette à employer dans le
cas de toles et plats d'épaisseur supérieure ou égale
à 3 mm, et des fils, barres et profilés de diamètre
ou épaisseur égal ou supérieur à 4 mm
Annexe E (normative) Types d'éprouvette à employer dans le cas
des tubes
Annexe F (informative) Mesurage de l'allongement pour cent
après rupture lorsque la valeur spécifiée est
inférieure à 5 %
Annexe G (informative) Mesurage de l'allongement pour cent
après rupture basé sur la subdivision de la longueur
initiale entre repères
Annexe H (informative) Méthode manuelle de détermination de
l'allongement total pour cent sous force maximale des
Annexe J (informative) Exactitude de l'essai de traction et
estimation de l'incertitude de mesure
Bibliographie
Describes the method for tensile testing of metallic materials and defines the mechanical properties which can be determined thereby at ambient temperature. Cover references, principle, definitions, symbols and designations, test pieces, determination of original cross sectional area, marking the original gauge length, accuracy of testing apparatus, conditions of testing, determination of percentage elongation after fracture, determination of proof strength, method of verification of permanent set strength, and test report.
| DevelopmentNote |
Indice de classement: A03-001. Supersedes NFA 03 001 (08/2003)
|
| DocumentType |
Standard
|
| PublisherName |
Association Francaise de Normalisation
|
| Status |
Superseded
|
| Supersedes |
| Standards | Relationship |
| I.S. EN 10002-1:2001 | Identical |
| UNE-EN 10002-1:2002 | Identical |
| DIN EN 10002-1:2001-12 | Identical |
| UNI EN 10002-1 : 2004 | Identical |
| BS EN 10002-1:2001 | Identical |
| NFC 32 102-15 : 2007 | CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V AND HAVING CROSS-LINKED INSULATION - PART 15: MULTICORE CABLES INSULATED AND SHEATHED WITH HEAT RESISTANT SILICONE RUBBER |
| NFA 35 020-2 : 1999 | STEEL PRODUCTS - END COUPLING AND ANCHORING STEEL DEVICES FOR HIGH ADHERENCE STEEL FOR CONCRETE REINFORCEMENT - PART 2: TEST METHODS |
| NFP 84 206 : 1995 | BUILDING WORKS - GROOVED SHEET METAL ROOFING WITH WATERPROOF COATING - PART 1: TECHNICAL CLAUSES - PART 2: SPECIAL CLAUSES |
| NF EN 15512 : 2009 | STEEL STATIC STORAGE SYSTEMS - ADJUSTABLE PALLET RACKING SYSTEMS - PRINCIPLES FOR STRUCTURAL DESIGN |
| NF EN 10217-6 : 2002 AMD 1 2005 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 6: SUBMERGED ARC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES |
| NF EN 10217-1 : 2002 AMD 1 2005 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES |
| NF EN ISO 16047 : 2005 AMD 1 2013 | FASTENERS - TORQUE/CLAMP FORCE TESTING |
| NF EN 50164-2 : 2008 | LIGHTNING PROTECTION COMPONENTS (LPC) - PART 2: REQUIREMENTS FOR CONDUCTORS AND EARTH ELECTRODES |
| NF ENV 1993-5 : 2002 FD | EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 5: PILING |
| NF EN 10248-1 : 1995 | HOT ROLLED SHEET PILING OF NON-ALLOY STEELS - PART 1: TECHNICAL DELIVERY CONDITIONS |
| NFL 06-351 : 1995 | AEROSPACE INDUSTRY - COATINGS THROUGH THERMAL SPRAYING - QUALITY OF COATINGS |
| NF EN 1993 1-10 : 2005 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-10: MATERIAL TOUGHNESS AND THROUGH-THICKNESS PROPERTIES |
| NF EN 50306-4 : 2003 | RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK CABLES HAVING SPECIAL FIRE PERFORMANCE - THIN WALL - PART 4: MULTICORE AND MULTIPAIR CABLES STANDARD WALL SHEATHED |
| NF EN 50264-3-1 : 2008 | RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK POWER AND CONTROL CABLES HAVING SPECIAL FIRE PERFORMANCE - PART 3-1: CABLES WITH CROSSLINKED ELASTOMERIC INSULATION WITH REDUCED DIMENSIONS - SINGLE CORE CABLES |
| NF EN ISO 15614-3 : 2008 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 3: FUSION WELDING OF NON-ALLOYED AND LOW ALLOYED CAST IRONS |
| FD A35 029 : 1999 FD | STEEL FOR CONCRETE REINFORCEMENT - WELDED CONNECTIONS - APPROVAL OF A WELDING PROCEDURE - APPROVAL OF WELDERS |
| NF EN 14525 : 2005 | DUCTILE IRON WIDE TOLERANCE COUPLINGS AND FLANGE ADAPTORS FOR USE WITH PIPES OF DIFFERENT MATERIALS: DUCTILE IRON, GREY IRON, STEEL, PVC-U, PE, FIBRE-CEMENT |
| NF EN 74-1 : 2006 | COUPLERS, SPIGOT PINS AND BASEPLATES FOR USE IN FALSEWORK AND SCAFFOLDS - PART 1: COUPLERS FOR TUBES - REQUIREMENTS AND TEST PROCEDURES |
| NF EN 12020-1 : 2008 | ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED PRECISION PROFILES IN ALLOYS EN AW-6060 AND EN AW-6063 - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
| NF EN 10250-1 : 1999 | OPEN DIE STEEL FORGINGS FOR GENERAL ENGINEERING PURPOSES - PART 1: GENERAL REQUIREMENTS |
| NFP 93 523 : 2002 | BUILDING SITE EQUIPMENT - TEMPORARY METALLIC STAIRWAYS INTENDED FOR PUBLIC USE |
| NFA 33 200 : 95 XP | IRON AND STEEL - MARAGING STEEL FOR FORGING INTENDED FOR THE MANUFACTURE OF FENCING BLADES |
| NFS 94 080-1 : 2007 | SURGICAL IMPLANTS - TITANIUM ALLOY TI 6 AI 4V - PART 1: BARS AND RODS |
| NFP 94 325-1 : 2004 | EXECUTION OF SPECIAL GEOTECHNICAL WORKS - GABION STRUCTURES - PART 1: STRUCTURES ON LAND |
| NF EN 50306-2 : 2003 | RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK CABLES HAVING SPECIAL FIRE PERFORMANCE - THIN WALL - PART 2: SINGLE CORE CABLES |
| XP M88 561 : 2005 XP | SECONDARY CONTAINMENTS OF THERMOPLASTICS STATIC TANKS FOR ABOVE GROUND STORAGE OF DOMESTIC HEATING OILS, LIQUID FUELS FOR MOVABLE HEATING APPLIANCE AND DIESEL FUELS - BLOW MOULDED OR ROTATIONALLY MOULDED POLYETHYLENE (PE) OR METALLIC SECONDARY CONTAINMENTS - REQUIREMENTS AND TEST METHODS |
| NFS 94 081-1 : 2007 | SURGICAL IMPLANTS - TITANIUM 6-ALUMINIUM AND 7-NIOBIUM ALLOY - PART 1: BARS AND RODS |
| NF EN 50382-2 : 2008 AMD 1 2013 | RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK HIGH TEMPERATURE POWER CABLES HAVING SPECIAL FIRE PERFORMANCE - PART 2: SINGLE CORE SILICONE RUBBER INSULATED CABLES FOR 120 DEGREES C OR 150 DEGREES C |
| NF EN 10088-4 : 2009 | STAINLESS STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES |
| NF EN 10343 : 2009 | STEELS FOR QUENCHING AND TEMPERING FOR CONSTRUCTION PURPOSES - TECHNICAL DELIVERY CONDITIONS |
| NFP 98 550 : 96 XP | VERTICAL ROAD TRAFFIC SIGNS - GANTRIES, CANTILEVERS AND HIGH MASTS - CALCULATION SPECIFICATIONS, INSTALLATION AND CONTROL |
| NF EN 50264-2-2 : 2008 | RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK POWER AND CONTROL CABLES HAVING SPECIAL FIRE PERFORMANCE - PART 2-2: CABLES WITH CROSSLINKED ELASTOMERIC INSULATION - MULTICORE CABLES |
| NF EN 10217-4 : 2002 AMD 1 2005 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 4: ELECTRIC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES |
| NF EN 10164 : 2005 | STEEL PRODUCTS WITH IMPROVED DEFORMATION PROPERTIES PERPENDICULAR TO THE SURFACE OF THE PRODUCT - TECHNICAL DELIVERY CONDITIONS |
| NF EN 12807 : 2009 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE BRAZED STEEL CYLINDERS FOR LIQUEFIED PETROLEUM GAS (LPG) - DESIGN AND CONSTRUCTION |
| NF EN 10202 : 2002 | COLD REDUCED TINMILL PRODUCTS - ELECTROLYTIC TINPLATE AND ELECTROLYTIC CHROMIUM/CHROMIUM OXIDE COATED STEEL |
| NFD 65 031 : 2009 | SHOP/STORE PRODUCT DISPLAY EQUIPMENT - METHODOLOGY AND CALCULATION METHOD FOR DETERMINATION OF GONDOLA CHARACTERISTICS |
| NF EN 10217-2 : 2002 AMD 1 2005 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: ELECTRIC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| NFS 94 051 : 2000 | IMPLANTS FOR SURGERY - METALLIC MATERIALS - WROUGHT STAINLESS STEEL |
| NF EN 1999-1-4 : 2007 AMD 1 2011 | EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-4: COLD-FORMED STRUCTURAL SHEETING |
| NFS 94 090 : 2005 | MEDICO-SURGICAL EQUIPMENT - MATERIALS FOR ANCILLARY POSITIONING INSTRUMENTS FOR BONE SURGERY - MARTENSITIC, PRECIPITATION HARDENING, AUSTENITIC AND AUSTENO-FERRITIC STAINLESS STEELS |
| NF EN 50382-1 : 2008 AMD 1 2013 | RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK HIGH TEMPERATURE POWER CABLES HAVING SPECIAL FIRE PERFORMANCE - PART 1: GENERAL REQUIREMENTS |
| NF EN 50264-3-2 : 2008 | RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK POWER AND CONTROL CABLES HAVING SPECIAL FIRE PERFORMANCE - PART 3-2: CABLES WITH CROSSLINKED ELASTOMERIC INSULATION WITH REDUCED DIMENSIONS - MULTICORE CABLES |
| NFE 29 204 : 2008 | INDUSTRIAL PIPEWORKS - FORGED STEEL FLANGES AND COLLARS - MATERIALS - MECHANICAL PROPERTIES - FABRICATION - TESTS |
| XP A49 342 : 97 XP | STEEL TUBES - WELDED STEEL TUBES WITH IMPROVED MACHINABILITY FOR MECHANICAL MACHINED PARTS - DIMENSIONS - TECHNICAL DELIVERY REQUIREMENTS |
| NF EN 10217-3 : 2002 AMD 1 2005 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES |
| NFA 35 555 : 95 FD | IRON AND STEEL - STRUCTURAL STEEL BARS DELIVERED IN THE QUENCHED AND TEMPERED CONDITION |
| NF CEN/TS 1071-9 : 2004 XP | ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC COATINGS - PART 9: DETERMINATION OF FRACTURE STRAIN |
| NF EN 50264-2-1 : 2008 | RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK POWER AND CONTROL CABLES HAVING SPECIAL FIRE PERFORMANCE - PART 2-1: CABLES WITH CROSSLINKED ELASTOMERIC INSULATION - SINGLE CORE CABLES |
| NFA 35 035 : 2001 | STEEL PRODUCTS - HOT-DIP ZINC OR ZINC-ALUMINIUM COATED PRESTRESSING SMOOTH WIRES AND 7-WIRE STRANDS |
| NF EN 10088-5 : 2009 | STAINLESS STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES |
| NF ENV 1993 1-3 : 99 XP | STEEL CONSTRUCTION - EUROCODE 3: DESIGN OF STEEL STRUCTURES AND NATIONAL APPLICATION DOCUMENT - PART 1-3: GENERAL RULES - SUPPLEMENTARY RULES FOR COLD FORMED THIN GAUGE MEMBERS AND SHEETING |
| NF EN 15381 : 2008 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN PAVEMENTS AND ASPHALT OVERLAYS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.