|
AASHTO M 242M/M 242 : 2015
|
SPECIFICATION FOR REINFORCED CONCRETE D-LOAD CULVERT, STORM DRAIN, AND SEWER PIPE |
|
AWWA C905 : 2010
|
POLYVINYL CHLORIDE (PVC) PRESSURE PIPE AND FABRICATED FITTINGS, 14 IN. THROUGH 48 IN. (350 MM THROUGH 1,200 MM), FOR WATER TRANSMISSION AND DISTRIBUTION |
|
ASTM A 796/A796M : 2017-02
|
PRACTICE FOR STRUCTURAL DESIGN OF CORRUGATED STEEL PIPE, PIPE-ARCHES, AND ARCHES FOR STORM AND SANITARY SEWERS AND OTHER BURIED APPLICATIONS |
|
ASCE 15 98 : 2000
|
STANDARD PRACTICE FOR DIRECT DESIGN OF BURIED PRECAST CONCRETE PIPE USING STANDARD INSTALLATIONS (SIDD) |
|
ASTM D 7498/D7498M : 2009 : R2014 : EDT 1
|
Standard Test Method for Vertical Strip Drains Using a Large Scale Consolidation Test |
|
AASHTO M 176M/M 176 : 2007
|
SPECIFICATION FOR POROUS CONCRETE PIPE |
|
ASTM D 3034 : 2016 : REDLINE
|
Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings |
|
ASTM F 794 : 2003
|
SPECIFICATION FOR POLY(VINYL CHLORIDE) (PVC) PROFILE GRAVITY SEWER PIPE AND FITTINGS BASED ON CONTROLLED INSIDE DIAMETER |
|
ASTM D 4751 : 2016 : REDLINE
|
Standard Test Methods for Determining Apparent Opening Size of a Geotextile |
|
ASTM D 5034 : 2009
|
TEST METHOD FOR BREAKING STRENGTH AND ELONGATION OF TEXTILE FABRICS (GRAB TEST) |
|
ASTM D 5199 : 2012-03
|
TEST METHOD FOR MEASURING THE NOMINAL THICKNESS OF GEOSYNTHETICS |
|
ASTM A 760/A760M : 2015 : REDLINE
|
Standard Specification for Corrugated Steel Pipe, Metallic-Coated for Sewers and Drains |
|
ASTM D6244 : 2006
|
TEST METHOD FOR VERTICAL COMPRESSION OF GEOCOMPOSITE PAVEMENT PANEL DRAINS |
|
AASHTO M 274 : 1987
|
SPECIFICATION FOR STEEL SHEET, ALUMINUM-COATED (TYPE 2), FOR CORRUGATED STEEL PIPE |
|
ASTM B 745/B745M : 2015 : REDLINE
|
Standard Specification for Corrugated Aluminum Pipe for Sewers and Drains |
|
ASCE 45 05 : 2006
|
GUIDELINES FOR THE DESIGN OF URBAN STORMWATER SYSTEMS |
|
CFR 29(PTS1900-1910) : 0
|
LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR |
|
ASTM C 655M : 2015-10
|
SPECIFICATION FOR REINFORCED CONCRETE D-LOAD CULVERT, STORM DRAIN, AND SEWER PIPE (METRIC) |
|
AASHTO M 294 : 2015
|
SPECIFICATION FOR CORRUGATED POLYETHYLENE PIPE, 300- TO 1500-MM (12- TO 60-IN.) DIAMETER |
|
ASTM F 405 : 2013-08
|
SPECIFICATION FOR CORRUGATED POLYETHYLENE (PE) PIPE AND FITTINGS |
|
ASTM C 478M : 2015-02
|
SPECIFICATION FOR PRECAST REINFORCED CONCRETE MANHOLE SECTIONS (METRIC) |
|
ASTM C 444M : 2017 : REDLINE
|
Standard Specification for Perforated Concrete Pipe (Metric) |
|
ASTM C 4 : 2004
|
Standard Specification for Clay Drain Tile and Perforated Clay Drain Tile |
|
ASTM D 2729 : 2011-03
|
SPECIFICATION FOR POLY(VINYL CHLORIDE) (PVC) SEWER PIPE AND FITTINGS |
|
ASTM F 679 : 2016 : REDLINE
|
Standard Specification for Poly(Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer Pipe and Fittings |
|
ASTM C 507M : 2016-11
|
SPECIFICATION FOR REINFORCED CONCRETE ELLIPTICAL CULVERT, STORM DRAIN, AND SEWER PIPE [METRIC] |
|
ASTM C 1433M : 2016-02
|
SPECIFICATION FOR PRECAST REINFORCED CONCRETE MONOLITHIC BOX SECTIONS FOR CULVERTS, STORM DRAINS, AND SEWERS (METRIC) |
|
ASCE 28 00 : 2001
|
STANDARD PRACTICE FOR DIRECT DESIGN OF PRECAST CONCRETE BOX SECTIONS FOR JACKING IN TRENCHLESS CONSTRUCTION |
|
ASTM C 33/C33M : 2016-04
|
SPECIFICATION FOR CONCRETE AGGREGATES |
|
AASHTO M 170M : 2015
|
SPECIFICATION FOR REINFORCED CONCRETE CULVERT, STORM DRAIN, AND SEWER PIPE [METRIC] |
|
ASTM C 412M : 2015 : REDLINE
|
SPECIFICATION FOR CONCRETE DRAIN TILE [METRIC] |
|
ASTM D 6088 :
|
PRACTICE FOR INSTALLATION OF GEOCOMPOSITE PAVEMENT DRAINS |
|
ANSI/AWWA C300 : 2016
|
REINFORCED CONCRETE PRESSURE PIPE, STEEL - CYLINDER TYPE |
|
ASTM C 76M : 2016-11
|
SPECIFICATION FOR REINFORCED CONCRETE CULVERT, STORM DRAIN, AND SEWER PIPE [METRIC] |
|
ASTM C 654M : 2015 : REDLINE
|
SPECIFICATION FOR POROUS CONCRETE PIPE [METRIC] |
|
ASTM D 7273/D7273M : 2008 : R2013 : EDT 1
|
Standard Guide for for Acceptance Testing Requirements for Geonets and Geonet Drainage Geocomposites |
|
AASHTO M 207M/M 207 : 2015
|
SPECIFICATION FOR REINFORCED CONCRETE ELLIPTICAL CULVERT, STORM DRAIN, AND SEWER PIPE |
|
ASTM F 667 : 2012-02
|
SPECIFICATION FOR 3 THROUGH 24 IN. CORRUGATED POLYETHYLENE PIPE AND FITTINGS |
|
AASHTO M 175M/M 175 : 2005
|
SPECIFICATION FOR PERFORATED CONCRETE PIPE |
|
AASHTO M 252 : 2009
|
SPECIFICATION FOR CORRUGATED POLYETHYLENE DRAINAGE PIPE |
|
ASTM C 985M : 2015-05
|
SPECIFICATION FOR NONREINFORCED CONCRETE SPECIFIED STRENGTH CULVERT, STORM DRAIN, AND SEWER PIPE [METRIC] |
|
ASTM D 6707 : 2006
|
SPECIFICATION FOR CIRCULAR-KNIT GEOTEXTILE FOR USE IN SUBSURFACE DRAINAGE APPLICATIONS |
|
ASTM D 2487 : 2011-06
|
PRACTICE FOR CLASSIFICATION OF SOILS FOR ENGINEERING PURPOSES (UNIFIED SOIL CLASSIFICATION SYSTEM) |
|
ASTM A 849 : 2015 : REDLINE
|
Standard Specification for Post-Applied Coatings, Pavings, and Linings for Corrugated Steel Sewer and Drainage Pipe |
|
AWWA C302 : 2016
|
REINFORCED CONCRETE PRESSURE PIPE, NONCYLINDER TYPE |
|
ASTM F 2418 : 2016-06
|
SPECIFICATION FOR POLYPROPYLENE (PP) CORRUGATED WALL STORMWATER COLLECTION CHAMBERS |
|
ASCE/EWRI 33 09 : 2009
|
COMPREHENSIVE TRANSBOUNDARY WATER QUALITY MANAGEMENT AGREEMENT WITH GUIDELINES FOR DEVELOPMENT OF A MANAGEMENT PLAN, STANDARDS, AND CRITERIA |
|
AASHTO M 178M/M 178 : 2007
|
SPECIFICATION FOR CONCRETE DRAIN TILE |
|
ASTM F 810 : 2013-01
|
SPECIFICATION FOR SMOOTHWALL POLYETHYLENE (PE) PIPE FOR USE IN DRAINAGE AND WASTE DISPOSAL ABSORPTION FIELDS |
|
ASTM D 6917 : 2016 : REDLINE
|
Standard Guide for Selection of Test Methods for Prefabricated Vertical Drains (PVD) |
|
ASTM D 2239 : 2012-12
|
SPECIFICATION FOR POLYETHYLENE (PE) PLASTIC PIPE (SIDR-PR) BASED ON CONTROLLED INSIDE DIAMETER |
|
ASTM C 136 : 2006
|
Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates |
|
AASHTO M 206M/M 206 : 2015
|
SPECIFICATION FOR REINFORCED CONCRETE ARCH CULVERT, STORM DRAIN, AND SEWER PIPE |
|
ASTM D 2241 : 2015 : REDLINE
|
Standard Specification for Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series) |
|
ASTM A 761/A761M : 2017-02
|
SPECIFICATION FOR CORRUGATED STEEL STRUCTURAL PLATE, ZINC-COATED, FOR FIELD-BOLTED PIPE, PIPE-ARCHES, AND ARCHES |
|
ASTM C 505M : 2015 : REDLINE
|
SPECIFICATION FOR NONREINFORCED CONCRETE IRRIGATION PIPE WITH RUBBER GASKET JOINTS [METRIC] |
|
ASTM C 118M : 2015 : REDLINE
|
SPECIFICATION FOR CONCRETE PIPE FOR IRRIGATION OR DRAINAGE [METRIC] |
|
ASTM D 2751 : 2005
|
Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Sewer Pipe and Fittings (Withdrawn 2014) |
|
ASTM C 506M : 2016-02
|
SPECIFICATION FOR REINFORCED CONCRETE ARCH CULVERT, STORM DRAIN, AND SEWER PIPE [METRIC] |
|
ASTM D 7001:2006
|
SPECIFICATION FOR GEOCOMPOSITES FOR PAVEMENT EDGE DRAINS AND OTHER HIGH-FLOW APPLICATIONS |
|
AWWA C301 : 2014
|
PRESTRESSED CONCRETE PRESSURE PIPE, STEEL-CYLINDER TYPE |
|
ASTM D 6918 : 2009
|
TEST METHOD FOR TESTING VERTICAL STRIP DRAINS IN THE CRIMPED CONDITION |
|
AASHTO M 167M/M 167 : 2014
|
SPECIFICATION FOR CORRUGATED STEEL STRUCTURAL PLATE, ZINC-COATED, FOR FIELD-BOLTED PIPE, PIPE-ARCHES, AND ARCHES |
|
ASTM A 762/A762M : 2015 : REDLINE
|
Standard Specification for Corrugated Steel Pipe, Polymer Precoated for Sewers and Drains |
|
ASTM F 2562/F2562M : 2015 : REDLINE
|
Specification for Steel Reinforced Thermoplastic Ribbed Pipe and Fittings for Non-Pressure Drainage and Sewerage |
|
AASHTO M 196 : 1992
|
SPECIFICATION FOR CORRUGATED ALUMINUM PIPE FOR SEWERS AND DRAINS |
|
ASTM D 1785 : 2015-08
|
SPECIFICATION FOR POLY(VINYL CHLORIDE) (PVC) PLASTIC PIPE, SCHEDULES 40, 80, AND 120 |
|
ASTM D 2434 : 1968
|
TEST METHOD FOR PERMEABILITY OF GRANULAR SOILS (CONSTANT HEAD) |
|
ASTM F 894 : 2013-08
|
SPECIFICATION FOR POLYETHYLENE (PE) LARGE DIAMETER PROFILE WALL SEWER AND DRAIN PIPE |
|
ASTM C 14 : 2015-01
|
SPECIFICATION FOR NONREINFORCED CONCRETE SEWER, STORM DRAIN, AND CULVERT PIPE |
|
ASTM D 4759 : 2011-09
|
PRACTICE FOR DETERMINING THE SPECIFICATION CONFORMANCE OF GEOSYNTHETICS |
|
ASTM D 7005 : 2003
|
TEST METHOD FOR DETERMINING THE BOND STRENGTH (PLY ADHESION) OF GEOCOMPOSITES |
|
AASHTO M 273M : 2011
|
SPECIFICATION FOR PRECAST REINFORCED CONCRETE BOX SECTIONS FOR CULVERTS, STORM DRAINS, AND SEWERS WITH LESS THAN 0.6 M OF COVER SUBJECTED TO HIGHWAY LOADINGS [METRIC] |
|
ASTM C 700 : 2013-02
|
SPECIFICATION FOR VITRIFIED CLAY PIPE, EXTRA STRENGTH, STANDARD STRENGTH, AND PERFORATED |
|
CFR 29(PT1926) : 0
|
LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR - SAFETY AND HEALTH REGULATIONS FOR CONSTRUCTION |
|
ASTM D 5262 : 2007
|
TEST METHOD FOR EVALUATING THE UNCONFINED TENSION CREEP AND CREEP RUPTURE BEHAVIOR OF GEOSYNTHETICS |
|
ASTM D 2680:2001
|
SPECIFICATION FOR ACRYLONITRILE-BUTADIENE-STYRENE (ABS) AND POLY (VINYL CHLORIDE) (PVC) COMPOSITE SEWER PIPING |
|
ASTM D 1621 : 2016 : REDLINE
|
Standard Test Method for Compressive Properties of Rigid Cellular Plastics |
|
AASHTO M 245 : 2000
|
SPECIFICATION FOR CORRUGATED STEEL PIPE, POLYMER-PRECOATED, FOR SEWERS AND DRAINS |
|
AWWA C303 : 2017
|
CONCRETE PRESSURE PIPE, BAR-WRAPPED, STEEL-CYLINDER TYPE |
|
ASTM D 2321 : 2014-09
|
PRACTICE FOR UNDERGROUND INSTALLATION OF THERMOPLASTIC PIPE FOR SEWERS AND OTHER GRAVITY-FLOW APPLICATIONS |
|
ASTM D 6364 : 2006
|
TEST METHOD FOR DETERMINING SHORT-TERM COMPRESSION BEHAVIOR OF GEOSYNTHETICS |
|
ASCE 26 97 : 2000
|
STANDARD PRACTICE FOR DIRECT DESIGN OF BURIED PRECAST CONCRETE BOX SECTIONS |
|
AASHTO M 145 : 1991
|
SPECIFICATION FOR CLASSIFICATION OF SOILS AND SOIL-AGGREGATE MIXTURES FOR HIGHWAY CONSTRUCTION PURPOSES |
|
ASTM D 3035 : 2015 : REDLINE
|
Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter |
|
AASHTO M 190 : 2000
|
SPECIFICATION FOR ASPHALT-COATED CORRUGATED METAL CULVERT PIPE AND PIPE-ARCHES |
|
ASTM C 361M : 2016 : REDLINE
|
SPECIFICATION FOR REINFORCED CONCRETE LOW-HEAD PRESSURE PIPE [METRIC] |
|
AWWA C900 : 2016
|
POLYVINYL CHLORIDE (PVC) PRESSURE PIPE AND FABRICATED FITTINGS, 4 IN. THROUGH 60 IN. (100 MM THROUGH 1,500 MM) |
|
AASHTO M 259M : 2011
|
SPECIFICATION FOR PRECAST REINFORCED CONCRETE BOX SECTIONS FOR CULVERTS, STORM DRAINS, AND SEWERS [METRIC] |
|
ASTM D 4595 : 2017 : REDLINE
|
Standard Test Method for Tensile Properties of Geotextiles by the Wide-Width Strip Method |
|
ASTM F 949 : 2015 : REDLINE
|
Standard Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings |
|
ASTM D 4716/D4716M : 2014 : REDLINE
|
Standard Test Method for Determining the (In-plane) Flow Rate per Unit Width and Hydraulic Transmissivity of a Geosynthetic Using a Constant Head |
|
ASTM F 758 : 2014 : REDLINE
|
Standard Specification for Smooth-Wall Poly(Vinyl Chloride) (PVC) Plastic Underdrain Systems for Highway, Airport, and Similar Drainage |
|
ASCE 27 00 : 2000
|
STANDARD PRACTICE OF DIRECT DESIGN OF PRECAST CONCRETE PIPE FOR JACKING IN TRENCHLESS CONSTRUCTION |