ASTM D 6763 : 2016
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Standard Guide for Testing Exterior Wood Stains and Clear Water Repellents
Available format(s)
Hardcopy , PDF
Superseded date
12-27-2022
Language(s)
English
Published date
02-19-2016
1.1This guide covers the selection and use of procedures for testing exterior wood stains and clear water repellents. This includes both water borne and solvent borne semitransparent and opaque stains and clear water repellents. The properties that can be examined or, in some cases, the relevant test procedures are listed in 2.1 and 2.2.
Note 1:The term “opaque stain” is defined as a pigmented composition intended for use on wooden surfaces to produce a uniform finish that obscures the grain and color of the wood, but not its surface texture; also called solid color or solid hide.
Note 2:The term “semitransparent” is defined as a pigmented composition intended for use on wooden surfaces to produce a uniform finish that does not fully obscure the grain or the texture of the wood.
Note 3:The term “clear” is defined as a transparent composition intended for use on wooden surfaces to produce a uniform finish that does not obscure the grain or texture of the wood.
1.1.1Discussion—When applied to woods that differ in color, there is a color difference between stained substrates.
1.2The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.3This standard may involve hazardous materials, operations, and equipment. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use.
| Committee |
D 01
|
| DocumentType |
Guide
|
| Pages |
9
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| ASTM D 2621 : 1987 : R1995 : EDT 1 | Standard Test Method for Infrared Identification of Vehicle Solids From Solvent-Reducible Paints |
| ASTM D 2196 : 2015 | Standard Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational Viscometer |
| ASTM D 3960 : 2005 : R2018 | Standard Practice for Determining Volatile Organic Compound (VOC) Content of Paints and Related Coatings |
| ASTM D 3456 : 2018 | Standard Practice for Determining by Exterior Exposure Tests the Susceptibility of Paint Films to Microbiological Attack |
| ASTM D 4062 : 1999 | Standard Test Method for Leveling of Paints by Draw-Down Method |
| ASTM D 3928 : 2000 : REV A : R2018 | Standard Test Method for Evaluation of Gloss or Sheen Uniformity |
| ASTM D 2372 : 1985 : R2015 | Standard Practice for Separation of Vehicle From Solvent-Reducible Paints |
| ASTM D 2697 : 2003 : R2008 | Standard Test Method for Volume Nonvolatile Matter in Clear or Pigmented Coatings |
| ASTM D 5326 : 1994 : REV A : R2009 | Standard Test Method for Color Development in Tinted Latex Paints |
| ASTM D 4017 : 1996 : REV A | Standard Test Method for Water in Paints and Paint Materials by Karl Fischer Method |
| ASTM D 3278 : 2020 | Standard Test Methods for Flash Point of Liquids by Small Scale Closed-Cup Apparatus |
| ASTM D 2243 : 1995 : R2003 | Standard Test Method for Freeze-Thaw Resistance of Water-Borne Coatings |
| ASTM D 2574 : 2016 | Standard Test Method for Resistance of Emulsion Paints in the Container to Attack by Microorganisms |
| ASTM D 1475 : 2013 | Standard Test Method For Density of Liquid Coatings, Inks, and Related Products |
| ASTM D 1210 : 1996 | Standard Test Method for Fineness of Dispersion of Pigment-Vehicle Systems by Hegman-Type Gage |
| ASTM D 6695 : 2003 : REV A | Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings |
| ASTM D 2697 : 2022 | Standard Test Method for Volume Nonvolatile Matter in Clear or Pigmented Coatings |
| ASTM D 2196 : 2010 | Standard Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational (Brookfield type) Viscometer |
| ASTM D 3719 : 2000 | Standard Test Method for Quantifying Dirt Collection on Coated Exterior Panels (Withdrawn 2009) |
| ASTM D 1475 : 1998 : R2012 | Standard Test Method For Density of Liquid Coatings, Inks, and Related Products |
| ASTM D 3359 : 2009 : EDT 2 | Standard Test Methods for Measuring Adhesion by Tape Test |
| ASTM D 2244 : 2021 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| ASTM D 4400 : 1999 : R2012 | Standard Test Method for Sag Resistance of Paints Using a Multinotch Applicator |
| ASTM D 2370 : 2016 | Standard Test Method for Tensile Properties of Organic Coatings |
| ASTM D 2245 : 1990 : R2005 | Standard Test Method for Identification of Oils and Oil Acids in Solvent-Reducible Paints |
| ASTM D 3960 : 2002 | Standard Practice for Determining Volatile Organic Compound (VOC) Content of Paints and Related Coatings |
| ASTM D 2697 : 2003 | Standard Test Method for Volume Nonvolatile Matter in Clear or Pigmented Coatings |
| ASTM E 1347 : 2006 : R2020 | Standard Test Method for Color and Color-Difference Measurement by Tristimulus Colorimetry |
| ASTM D 3960 : 2001 | Standard Practice for Determining Volatile Organic Compound (VOC) Content of Paints and Related Coatings |
| ASTM D 6686 : 2001 : R2008 : EDT 2 | Standard Test Method for Evaluation of Tannin Stain Resistance of Coatings |
| ASTM D 3273 : 2000 : R2005 | Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber |
| ASTM D 1296 : 2001 | Standard Test Method for Odor of Volatile Solvents and Diluents |
| ASTM D 2197 : 1998 : R2002 | Standard Test Method for Adhesion of Organic Coatings by Scrape Adhesion |
| ASTM D 2244 : 2015 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| ASTM D 3273 : 2012 : EDT 1 | Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber |
| ASTM D 3456 : 1986 : R1996 | Standard Practice for Determining by Exterior Exposure Tests the Susceptibility of Paint Films to Microbiological Attack |
| ASTM D 2370 : 1998 | Standard Test Method for Tensile Properties of Organic Coatings |
| ASTM D 4446 : 2008 | Standard Test Method for Anti-Swelling Effectiveness of Water-Repellent Formulations and Differential Swelling of Untreated Wood When Exposed to Liquid Water Environments |
| ASTM D 3274 : 2009 : R2021 | Standard Test Method for Evaluating Degree of Surface Disfigurement of Paint Films by Fungal or Algal Growth, or Soil and Dirt Accumulation |
| ASTM D 2621 : 1987 : R2016 | Standard Test Method for Infrared Identification of Vehicle Solids From Solvent-Reducible Paints |
| ASTM D 2196 : 2005 | Standard Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational (Brookfield type) Viscometer |
| ASTM D 2371 : 1985 : R2010 | Standard Test Method for Pigment Content of Solvent-Reducible Paints (Withdrawn 2019) |
| ASTM D 4587 : 1991 | Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings |
| ASTM D 2372 : 1985 : R2005 | Standard Practice for Separation of Vehicle From Solvent-Reducible Paints |
| ASTM D 1006 : 2001 | Standard Practice for Conducting Exterior Exposure Tests of Paints on Wood |
| ASTM D 3925 : 1981 : R1985 | Standard Practice for Sampling Liquid and Related Pigmented Coatings |
| ASTM D 3273 : 2012 | Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber |
| ASTM D 3960 : 2005 | Standard Practice for Determining Volatile Organic Compound (VOC) Content of Paints and Related Coatings |
| ASTM D 1475 : 1985 | Standard Test Method for Density of Paint, Varnish, Lacquer, and Related Products |
| ASTM D 869 : 2021 | Standard Test Method for Evaluating Degree of Settling of Paint |
| ASTM D 3928 : 2000 : REV A : R2014 | Standard Test Method for Evaluation of Gloss or Sheen Uniformity |
| ASTM D 2369 : 1998 | Standard Test Method for Volatile Content of Coatings |
| ASTM D 2244 : 2011 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| ASTM D 3278 : 1996 : EDT 1 | Standard Test Methods for Flash Point of Liquids by Small Scale Closed-Cup Apparatus |
| ASTM D 4400 : 1999 : R2007 | Standard Test Method for Sag Resistance of Paints Using a Multinotch Applicator |
| ASTM D 4017 : 2002 : R2015 | Standard Test Method for Water in Paints and Paint Materials by Karl Fischer Method |
| ASTM D 5401 : 2003 | Standard Test Method for Evaluating Clear Water Repellent Coatings on Wood |
| ASTM D 3925 : 1991 : R1996 | Standard Practice for Sampling Liquid Paints and Related Pigmented Coatings |
| ASTM D 3168 : 1985 : R2022 | Standard Practice for Qualitative Identification of Polymers in Emulsion Paints |
| ASTM D 1729 : 2016 | Standard Practice for Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials |
| ASTM D 869 : 1985 : R2015 | Standard Test Method for Evaluating Degree of Settling of Paint |
| ASTM D 2805 : 2011 : R2018 | Standard Test Method for Hiding Power of Paints by Reflectometry |
| ASTM D 3273 : 1986 : R1991 : EDT 1 | Standard Test Method for Resistance to Growth of Moid on the Surface of Interior Coatings in an Enviormental Chamber |
| ASTM D 3793 : 2004 | Standard Test Method for Low-Temperature Coalescence of Latex Paint Films |
| ASTM D 6695 : 2003 : REV B | Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings |
| ASTM D 3723 : 2005 : R2017 | Standard Test Method for Pigment Content of Water-Emulsion Paints by Low-Temperature Ashing |
| ASTM D 5401 : 2003 : R2009 | Standard Test Method for Evaluating Clear Water Repellent Coatings on Wood |
| ASTM D 4062 : 2011 : R2016 | Standard Test Method for Leveling of Paints by Draw-Down Method |
| ASTM D 3274 : 2009 : R2017 | Standard Test Method for Evaluating Degree of Surface Disfigurement of Paint Films by Fungal or Algal Growth, or Soil and Dirt Accumulation |
| ASTM D 3960 : 2005 : R2013 | Standard Practice for Determining Volatile Organic Compound (VOC)Content of Paints and Related Coatings |
| ASTM D 2621 : 1987 : R2005 | Standard Test Method for Infrared Identification of Vehicle Solids From Solvent-Reducible Paints |
| ASTM D 2244 : 2009 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| ASTM D 2197 : 2013 | Standard Test Method for Adhesion of Organic Coatings by Scrape Adhesion |
| ASTM D 2245 : 1990 : R2011 | Standard Test Method for Identification of Oils and Oil Acids in Solvent-Reducible Paints (Withdrawn 2016) |
| ASTM D 1554 : 2001 | Standard Terminology Relating to Wood-Base Fiber and Particle Panel Materials |
| ASTM D 2574 : 2000 | Standard Test Method for Resistance of Emulsion Paints in the Container to Attack by Microorganisms |
| ASTM D 4017 : 1981 : R1987 : EDT 1 | Standard Test Method for Water in Paints and Paint Materials by Karl Fischer Method |
| ASTM D 3168 : 1985 : R2005 | Standard Practice for Qualitative Identification of Polymers in Emulsion Paints |
| ASTM E 1347 : 2006 : R2015 | Standard Test Method for Color and Color-Difference Measurement by Tristimulus Colorimetry |
| ASTM D 2197 : 1998 | Standard Test Method for Adhesion of Organic Coatings by Scrape Adhesion |
| ASTM D 3359 : 1997 | Standard Test Methods for Measuring Adhesion by Tape Test |
| ASTM D 1554 : 2000 | Standard Terminology Relating to Wood-Base Fiber and Particle Panel Materials |
| ASTM D 6686 : 2001 : R2019 | Standard Test Method for Evaluation of Tannin Stain Resistance of Coatings |
| ASTM D 2244 : 2002 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| ASTM D 2372 : 1985 : R1999 | Standard Practice for Separation of Vehicle From Solvent-Reducible Paints |
| ASTM D 2244 : 2016 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| ASTM D 4060 : 2007 | Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser |
| ASTM D 2371 : 1985 : R2005 | Standard Test Method for Pigment Content of Solvent-Reducible Paints |
| ASTM E 1347 : 2003 | Standard Test Method for Color and Color-Difference Measurement by Tristimulus (Filter) Colorimetry |
| ASTM D 2369 : 1981 : EDT 1 | Standard Test Method for Volatile Content of Coatings |
| ASTM D 1296 : 2001 : R2012 | Standard Test Method for Odor of Volatile Solvents and Diluents (Withdrawn 2021) |
| ASTM D 1554 : 2001 : EDT 1 | Standard Terminology Relating to Wood-Base Fiber and Particle Panel Materials |
| ASTM D 5401 : 2003 : R2008 | Standard Test Method for Evaluating Clear Water Repellent Coatings on Wood |
| ASTM D 6695 : 2001 | Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings |
| ASTM D 1006 : 1993 | Standard Practice for Conducting Exterior Exposure Tests of Paints on Wood |
| ASTM D 2369 : 2001 | Standard Test Method for Volatile Content of Coatings |
| ASTM D 2244 : 2015 : EDT 1 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| ASTM D 2486 : 2006 | Standard Test Methods for Scrub Resistance of Wall Paints |
| ASTM D 2244 : 2009 : REV B | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| ASTM D 1475 : 1998 : R2003 | Standard Test Method for Density of Liquid Coatings, Inks, and Related Products |
| ASTM D 3723 : 2005 : EDT 1 | Standard Test Method for Pigment Content of Water-Emulsion Paints by Low-Temperature Ashing |
| ASTM D 2244 : 2002 : EDT 1 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| ASTM D 2369 : 2010 | Standard Test Method for Volatile Content of Coatings |
| ASTM D 1038 : 1983 : R1993 | Standard Terminology Relating to Veneer and Plywood |
| ASTM D 93 : 1990 : EDT 1 | Standard Test Methods for Flash Point by Pensky-Martens Closed Tester |
| ASTM D 2244 : 2015 : REV A | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| ASTM D 4141 : 2007 | Standard Practice for Conducting Black Box and Solar Concentrating Exposures of Coatings |
| ASTM D 2697 : 2003 : R2014 | Standard Test Method for Volume Nonvolatile Matter in Clear or Pigmented Coatings |
| ASTM D 3278 : 1982 : EDT 1 | Standard Test Methods for Flash Point of Liquids by Setaflash Closed-Cup Apparatus |
| ASTM E 105 : 2021 | Standard Guide for Probability Sampling of Materials |
| ASTM D 3719 : 1995 | Standard Test Method for Quantifying Dirt Collection on Coated Exterior Panels |
| ASTM D 3278 : 2021 | Standard Test Methods for Flash Point of Liquids by Small Scale Closed-Cup Apparatus |
| ASTM D 6695 : 2008 | Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings |
| ASTM D 3456 : 1986 : R2008 | Standard Practice for Determining by Exterior Exposure Tests the Susceptibility of Paint Films to Microbiological Attack |
| ASTM D 2370 : 1998 : R2002 : EDT 1 | Standard Test Method for Tensile Properties of Organic Coatings |
| ASTM D 3274 : 1995 | Standard Test Method for Evaluating Degree of Surface Disfigurement of Paint Films by Microbial (Fungal or Algal) Growth or Soil and Dirt Accumulation |
| ASTM D 2486 : 2017 | Standard Test Methods for Scrub Resistance of Wall Paints |
| ASTM D 1210 : 2005 | Standard Test Method for Fineness of Dispersion of Pigment-Vehicle Systems by Hegman-Type Gage |
| ASTM D 2697 : 1986 : R1998 | Standard Test Method for Volume Nonvolatile Matter in Clear or Pigmented Coatings |
| ASTM D 3168 : 1985 : R1999 | Standard Practice for Qualitative Identification of Polymers in Emulsion Paints |
| ASTM E 1347 : 1997 | Standard Test Method for Color and Color-Difference Measurement by Tristimulus (Filter) Colorimetry |
| ASTM D 968 : 2022 | Standard Test Methods for Abrasion Resistance of Organic Coatings by Falling Abrasive |
| ASTM D 3168 : 1985 : R2016 | Standard Practice for Qualitative Identification of Polymers in Emulsion Paints |
| ASTM D 3456 : 1986 : R2002 | Standard Practice for Determining by Exterior Exposure Tests the Susceptibility of Paint Films to Microbiological Attack |
| ASTM D 2697 : 2003 : R2021 | Standard Test Method for Volume Nonvolatile Matter in Clear or Pigmented Coatings |
| ASTM D 1210 : 2005 : R2022 | Standard Test Method for Fineness of Dispersion of Pigment-Vehicle Systems by Hegman-Type Gage |
| ASTM D 1640 : 1983 : R1989 : EDT 1 | Standard Test Methods for Drying, Curing, or Film Formation of Organic Coatings at Room Temperature |
| ASTM D 3359 : 2009 | Standard Test Methods for Measuring Adhesion by Tape Test |
| ASTM D 4585 : 1999 | Standard Practice for Testing Water Resistance of Coatings Using Controlled Condensation |
| ASTM D 4587 : 2001 | Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings |
| ASTM D 56 : 2021 : REV A | Standard Test Method for Flash Point by Tag Closed Cup Tester |
| ASTM D 1729 : 1996 : R2009 | Standard Practice for Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials |
| ASTM D 4060 : 2001 | Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser |
| ASTM D 4287 : 2000 : R2010 | Standard Test Method for High-Shear Viscosity Using a Cone/Plate Viscometer |
| ASTM D 2574 : 2006 : R2012 | Standard Test Method for Resistance of Emulsion Paints in the Container to Attack by Microorganisms |
| ASTM D 2369 : 2020 | Standard Test Method for Volatile Content of Coatings |
| ASTM D 3723 : 1984 : R1999 | Standard Test Method for Pigment Content of Water-Emulsion Paints by Low-Temperature Ashing |
| ASTM D 3359 : 2022 | Standard Test Methods for Rating Adhesion by Tape Test |
| ASTM D 1475 : 1960 : R1968 | Standard Method Of Test For Density Of Paint, Varnish, Lacquer, And Related Products |
| ASTM D 3274 : 2009 | Standard Test Method for Evaluating Degree of Surface Disfigurement of Paint Films by Fungal or Algal Growth, or Soil and Dirt Accumulation |
| ASTM D 3273 : 2021 | Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber |
| ASTM D 2196 : 2018 | Standard Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational Viscountess |
| ASTM D 1849 : 1995 | Standard Test Method for Package Stability of Paint |
| ASTM D 3960 : 1998 | Standard Practice for Determining Volatile Organic Compound (VOC) Content of Paints and Related Coatings |
| ASTM D 2244 : 2014 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| ASTM E 1347 : 2006 | Standard Test Method for Color and Color-Difference Measurement by Tristimulus Colorimetry |
| ASTM D 2805 : 1996 : REV A | Standard Test Method for Hiding Power of Paints by Reflectometry |
| ASTM D 1729 : 1996 : R2003 | Standard Practice for Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials |
| ASTM D 3793 : 2006 | Standard Test Method for Low-Temperature Coalescence of Latex Paint Films by Porosity Measurement (Withdrawn 2012) |
| ASTM D 1210 : 2005 : R2014 | Standard Test Method for Fineness of Dispersion of Pigment-Vehicle Systems by Hegman-Type Gage |
| ASTM D 3359 : 2002 | Standard Test Methods for Measuring Adhesion by Tape Test |
| ASTM D 3168 : 1985 : R2011 | Standard Practice for Qualitative Identification of Polymers in Emulsion Paints |
| ASTM D 4141 : 2001 | Standard Practice for Conducting Black Box and Solar Concentrating Exposures of Coatings |
| ASTM D 6695 : 2016 | Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings |
| ASTM D 3359 : 2009 : EDT 1 | Standard Test Methods for Measuring Adhesion by Tape Test |
| ASTM D 2370 : 1998 : R2010 | Standard Test Method for Tensile Properties of Organic Coatings |
| ASTM D 56 : 2016 : REV A | Standard Test Method for Flash Point by Tag Closed Cup Tester |
| ASTM D 4287 : 2000 : R2014 | Standard Test Method for High-Shear Viscosity Using a Cone/Plate Viscometer |
| ASTM D 2371 : 1985 : R1999 | Standard Test Method for Pigment Content of Solvent-Reducible Paints |
| ASTM D 4017 : 2002 : R2008 : EDT 1 | Standard Test Method for Water in Paints and Paint Materials by Karl Fischer Method |
| ASTM D 1849 : 1995 : R2003 | Standard Test Method for Package Stability of Paint |
| ASTM D 2244 : 2005 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| ASTM D 4214 : 1998 | Standard Test Methods for Evaluating the Degree of Chalking of Exterior Paint Films (Withdrawn 2007) |
| ASTM D 4958 : 2010 | Standard Test Method for Comparison of the Brush Drag of Latex Paints |
| ASTM D 4287 : 2000 : R2019 | Standard Test Method for High-Shear Viscosity Using a Cone/Plate Viscometer |
| ASTM D 2369 : 2007 | Standard Test Method for Volatile Content of Coatings |
| ASTM D 4287 : 2000 : R2005 | Standard Test Method for High-Shear Viscosity Using a Cone/Plate Viscometer |
| ASTM D 1849 : 1995 : R2019 | Standard Test Method for Package Stability of Paint |
| ASTM D 1475 : 1998 : R2008 | Standard Test Method For Density of Liquid Coatings, Inks, and Related Products |
| ASTM D 2369 : 2010 : EDT 1 | Standard Test Method for Volatile Content of Coatings |
| ASTM D 3928 : 2000 : REV A : R2010 | Standard Test Method for Evaluation of Gloss or Sheen Uniformity |
| ASTM D 1006 : 2001 : R2006 | Standard Practice for Conducting Exterior Exposure Tests of Paints on Wood |
| ASTM D 3359 : 2007 | Standard Test Methods for Measuring Adhesion by Tape Test |
| ASTM D 1849 : 1995 : R2008 | Standard Test Method for Package Stability of Paint |
| ASTM D 1210 : 2005 : R2010 | Standard Test Method for Fineness of Dispersion of Pigment-Vehicle Systems by Hegman-Type Gage |
| ASTM D 2372 : 1985 : R2022 | Standard Practice for Separation of Vehicle From Solvent-Reducible Paints |
| ASTM D 4212 : 1999 | Standard Test Method for Viscosity by Dip-Type Viscosity Cups |
| ASTM D 1640 : 2003 | Standard Test Methods for Drying, Curing, or Film Formation of Organic Coatings at Room Temperature |
| ASTM D 1296 : 1993 : R1996 | Standard Test Method for Odor of Volatile Solvents and Diluents |
| ASTM D 4214 : 2007 : R2015 | Standard Test Methods for Evaluating the Degree of Chalking of Exterior Paint Films |
| ASTM D 4214 : 2007 | Standard Test Methods for Evaluating the Degree of Chalking of Exterior Paint Films |
| ASTM D 2369 : 1993 | Standard Test Method for Volatile Content of Coatings |
| ASTM D 1038 : 2011 | Standard Terminology Relating to Veneer and Plywood |
| ASTM D 5326 : 1994 : REV A : R2013 | Standard Test Method for Color Development in Tinted Latex Paints |
| ASTM D 3274 : 2009 : R2013 | Standard Test Method for Evaluating Degree of Surface Disfigurement of Paint Films by Fungal or Algal Growth, or Soil and Dirt Accumulation |
| ASTM D 5326 : 2022 | Standard Test Method for Color Development in Tinted Latex Paints |
| ASTM D 2621 : 1987 : R2011 | Standard Test Method for Infrared Identification of Vehicle Solids From Solvent-Reducible Paints |
| ASTM D 3273 : 2000 | Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber |
| ASTM D 3925 : 2002 : R2022 | Standard Practice for Sampling Liquid Paints and Related Pigmented Coatings |
| ASTM D 4212 : 2010 | Standard Test Method for Viscosity by Dip-Type Viscosity Cups |
| ASTM D 2197 : 2010 | Standard Test Method for Adhesion of Organic Coatings by Scrape Adhesion |
| ASTM D 2243 : 1995 : R2014 | Standard Test Method for Freeze-Thaw Resistance of Water-Borne Coatings |
| ASTM D 2486 : 2006 : R2016 | Standard Test Methods for Scrub Resistance of Wall Paints |
| ASTM D 4585 : 2007 | Standard Practice for Testing Water Resistance of Coatings Using Controlled Condensation |
| ASTM D 56 : 2021 | Standard Test Method for Flash Point by Tag Closed Cup Tester |
| ASTM D 3723 : 2005 : R2011 | Standard Test Method for Pigment Content of Water-Emulsion Paints by Low-Temperature Ashing |
| ASTM D 4958 : 2010 : R2016 | Standard Test Method for Comparison of the Brush Drag of Latex Paints |
| ASTM D 2244 : 2007 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| ASTM D 1640 : 1995 : R1999 | Standard Test Methods for Drying, Curing, or Film Formation of Organic Coatings at Room Temperature |
| ASTM D 4017 : 1990 | Standard Test Method for Water in Paints and Paint Materials by Karl Fischer Method |
| ASTM D 4958 : 1997 | Standard Test Method for Comparison of the Brush Drag of Latex Paints |
| ASTM D 3723 : 2005 | Standard Test Method for Pigment Content of Water-Emulsion Paints by Low-Temperature Ashing |
| ASTM D 2370 : 1998 : R2002 | Standard Test Method for Tensile Properties of Organic Coatings |
| ASTM D 4017 : 2002 | Standard Test Method for Water in Paints and Paint Materials by Karl Fischer Method |
| ASTM D 2244 : 2022 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| ASTM D 2574 : 2006 | Standard Test Method for Resistance of Emulsion Paints in the Container to Attack by Microorganisms |
| ASTM D 2197 : 1986 : R1991 : EDT 1 | Standard Test Method for Adhesion of Organic Coatings by Scrape Adhesion |
| ASTM D 6686 : 2001 : R2013 | Standard Test Method for Evaluation of Tannin Stain Resistance of Coatings |
| ASTM D 93 : 2000 | Standard Test Methods for Flash-Point by Pensky-Martens Closed Cup Tester |
| ASTM D 4587 : 2011 | Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings |
| ASTM E 1347 : 2006 : R2011 | Standard Test Method for Color and Color-Difference Measurement by Tristimulus Colorimetry |
| ASTM D 5401 : 1993 | Standard Test Method for Evaluating Clear Water Repellent Coatings on Wood (Withdrawn 2002) |
| ASTM D 5326 : 1994 : REV A | Standard Test Method for Color Development in Tinted Latex Paints |
| ASTM D 1296 : 2001 : R2007 | Standard Test Method for Odor of Volatile Solvents and Diluents |
| ASTM D 4400 : 2018 | Standard Test Method for Sag Resistance of Paints Using a Multinotch Applicator |
| ASTM E 313 : 1998 | Standard Practice for Calculating Yellowness and Whiteness Indices from Instrumentally Measured Color Coordinates |
| ASTM E 105 : 2016 | Standard Practice for Probability Sampling of Materials |
| ASTM D 1729 : 1996 | Standard Practice for Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials |
| ASTM D 4287 : 2000 | Standard Test Method for High-Shear Viscosity Using a Cone/Plate Viscometer |
| ASTM D 2245 : 1990 : R1999 | Standard Test Method for Identification of Oils and Oil Acids in Solvent-Reducible Paints |
| ASTM D 2197 : 1998 : R2004 | Standard Test Method for Adhesion of Organic Coatings by Scrape Adhesion |
| ASTM D 1554 : 2010 : R2016 | Standard Terminology Relating to Wood-Base Fiber and Particle Panel Materials |
| ASTM D 2805 : 2011 | Standard Test Method for Hiding Power of Paints by Reflectometry |
| ASTM D 4060 : 1995 | Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser |
| ASTM D 93 : 1985 | Standard Test Method for Flash Point by Pensky-Martens Closed Tester |
| ASTM D 6695 : 2003 | Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings |
| ASTM D 4400 : 1999 : R2012 : EDT 1 | Standard Test Method for Sag Resistance of Paints Using a Multinotch Applicator |
| ASTM D 1729 : 2022 | Standard Practice for Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials |
| ASTM D 56 : 2022 | Standard Test Method for Flash Point by Tag Closed Cup Tester |
| ASTM D 4212 : 2010 : R2014 | Standard Test Method for Viscosity by Dip-Type Viscosity Cups |
| ASTM D 3456 : 1986 : R2012 | Standard Practice for Determining by Exterior Exposure Tests the Susceptibility of Paint Films to Microbiological Attack |
| ASTM D 3928 : 2000 : REV A : R2005 | Standard Test Method for Evaluation of Gloss or Sheen Uniformity |
| ASTM D 4400 : 1999 | Standard Test Method for Sag Resistance of Paints Using a Multinotch Applicator |
| ASTM D 2197 : 2016 | Standard Test Method for Adhesion of Organic Coatings by Scrape Adhesion |
| ASTM D 2369 : 1995 | Standard Test Method for Volatile Content of Coatings |
| ASTM D 2372 : 1985 : R2010 | Standard Practice for Separation of Vehicle From Solvent-Reducible Paints |
| ASTM D 1038 : 2019 | Standard Terminology Relating to Veneer, Plywood, and Wood Structural Panels |
| ASTM D 2369 : 2004 | Standard Test Method for Volatile Content of Coatings |
| ASTM D 4446 : 2005 | Standard Test Method for Anti-Swelling Effectiveness of Water-Repellent Formulations and Differential Swelling of Untreated Wood When Exposed to Liquid Water Environments |
| ASTM D 3359 : 2008 | Standard Test Methods for Measuring Adhesion by Tape Test |
| ASTM D 4287 : 1994 | Standard Test Method for High-Shear Viscosity Using a Cone/Plate Viscometer |
| ASTM D 1640 : 2003 : R2009 | Standard Test Methods for Drying, Curing, or Film Formation of Organic Coatings at Room Temperature |
| ASTM D 1849 : 1995 : R2014 : EDT 1 | Standard Test Method for Package Stability of Paint |
| ASTM D 3960 : 2004 | Standard Practice for Determining Volatile Organic Compound (VOC) Content of Paints and Related Coatings |
| ASTM D 56 : 1987 | Standard Test Method for Flash Point by Tag Closed Tester |
| ASTM D 2369 : 1990 | Standard Test Method for Volatile Content of Coatings |
| ASTM D 5401 : 2003 : R2022 | Standard Test Method for Evaluating Clear Water Repellent Coatings on Wood |
| ASTM D 5401 : 2003 : R2014 | Standard Test Method for Evaluating Clear Water Repellent Coatings on Wood |
| ASTM D 2196 : 2018 : EDT 1 | Standard Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational Viscometer |
| ASTM D 3925 : 2002 | Standard Practice for Sampling Liquid Paints and Related Pigmented Coatings |
| ASTM D 2244 : 2009 : REV A | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| ASTM D 2371 : 2019 | Standard Test Method for Pigment Content of Solvent-Reducible Paints |
| ASTM D 5326 : 1994 : REV A : R2002 | Standard Test Method for Color Development in Tinted Latex Paints |
| ASTM D 3928 : 1989 | Standard Test Method for Evaluation of Gloss or Sheen Uniformity |
| ASTM D 3273 : 2016 | Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber |
| ASTM D 2369 : 2003 | Standard Test Method for Volatile Content of Coatings |
| ASTM D 2244 : 1993 : R2000 | Standard Test Method for Calculation of Color Differences From Instrumentally Measured Color Coordinates |
| ASTM D 4017 : 2022 | Standard Test Method for Water in Paints and Paint Materials by Karl Fischer Method |
| ASTM D 4141 : 1995 | Standard Practice for Conducting Black Box and Solar Concentrating Exposures of Coatings |
| ASTM D 968 : 2017 | Standard Test Methods for Abrasion Resistance of Organic Coatings by Falling Abrasive |
| ASTM D 4062 : 2011 | Standard Test Method for Leveling of Paints by Draw-Down Method |
| ASTM D 1554 : 2010 | Standard Terminology Relating to Wood-Base Fiber and Particle Panel Materials |
| ASTM D 6686 : 2001 | Standard Test Method for Evaluation of Tannin Stain Resistance of Coatings |
| ASTM D 2486 : 2000 | Standard Test Methods for Scrub Resistance of Wall Paints |
| ASTM D 1475 : 1998 | Standard Test Method for Density of Liquid Coatings, Inks, and Related Products |
| ASTM D 3723 : 2022 | Standard Test Method for Pigment Content of Water-Emulsion Paints by Low-Temperature Ashing |
| ASTM D 3359 : 2017 | Standard Test Methods for Rating Adhesion by Tape Test |
| ASTM D 2369 : 2010 : R2015 : EDT 1 | Standard Test Method for Volatile Content of Coatings |
| ASTM D 4587 : 2005 | Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings |
| ASTM D 3278 : 1996 : R2004 : EDT 1 | Standard Test Methods for Flash Point of Liquids by Small Scale Closed-Cup Apparatus |
| ASTM D 2805 : 1996 : REV A : R2003 | Standard Test Method for Hiding Power of Paints by Reflectometry |
| ASTM D 3274 : 2009 : EDT 1 | Standard Test Method for Evaluating Degree of Surface Disfigurement of Paint Films by Fungal or Algal Growth, or Soil and Dirt Accumulation |
| ASTM D 2196 : 1999 | Standard Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational (Brookfield type) Viscometer |
| ASTM D 93 : 1997 | Standard Test Methods for Flash-Point by Pensky-Martens Closed Cup Tester |
| ASTM D 2369 : 1987 | Standard Test Method for Volatile Content of Coatings |
| ASTM D 2243 : 1995 | Standard Test Method for Freeze-Thaw Resistance of Water-Borne Coatings |
| ASTM D 3925 : 2002 : R2015 | Standard Practice for Sampling Liquid Paints and Related Pigmented Coatings |
| ASTM D 2621 : 1987 : R2000 | Standard Test Method for Infrared Identification of Vehicle Solids From Solvent-Reducible Paints |
| ASTM D 4060 : 2014 | Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser |
| ASTM D 4060 : 2010 | Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser |
| ASTM D 2370 : 2016 : R2021 | Standard Test Method for Tensile Properties of Organic Coatings |
| ASTM D 2369 : 2001 : EDT 1 | Standard Test Method for Volatile Content of Coatings |
| ASTM D 2486 : 2006 : R2012 : EDT 1 | Standard Test Methods for Scrub Resistance of Wall Paints |
| ASTM D 1554 : 2001 : R2005 | Standard Terminology Relating to Wood-Base Fiber and Particle Panel Materials |
| ASTM D 4446 : 1984 : R1995 : EDT 1 | Standard Test Method for Anti-Swelling Effectiveness of Water-Repellent Formulations and Differential Swelling of Untreated Wood When Exposed to Liquid Water Environments |
| ASTM D 3928 : 2000 : REV A | Standard Test Method for Evaluation of Gloss or Sheen Uniformity |
| ASTM D 2243 : 1995 : R2008 | Standard Test Method for Freeze-Thaw Resistance of Water-Borne Coatings |
| ASTM D 4446 : 2008 : R2012 | Standard Test Method for Anti-Swelling Effectiveness of Water-Repellent Formulations and Differential Swelling of Untreated Wood When Exposed to Liquid Water Environments |
| ASTM D 2369 : 1992 | Standard Test Method for Volatile Content of Coatings |
| ASTM D 4060 : 2019 | Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser |
| ASTM D 2197 : 2016 : R2022 | Standard Test Method for Adhesion of Organic Coatings by Scrape Adhesion |
| ASTM D 1038 : 1983 : R2005 | Standard Terminology Relating to Veneer and Plywood |
| ASTM D 4446 : 2002 | Standard Test Method for Anti-Swelling Effectiveness of Water-Repellent Formulations and Differential Swelling of Untreated Wood When Exposed to Liquid Water Environments |
| ASTM D 3925 : 2002 : R2010 | Standard Practice for Sampling Liquid Paints and Related Pigmented Coatings |
| ASTM D 3278 : 1996 : R2011 | Standard Test Methods for Flash Point of Liquids by Small Scale Closed-Cup Apparatus (Withdrawn 2020) |
| ASTM D 6686 : 2001 : R2008 : EDT 1 | Standard Test Method for Evaluation of Tannin Stain Resistance of Coatings |
| ASTM D 4212 : 2016 | Standard Test Method for Viscosity by Dip-Type Viscosity Cups |
| ASTM D 3793 : 2000 | Standard Test Method for Low-Temperature Coalescence of Latex Paint Films |
| ASTM D 1038 : 1983 : R2000 | Standard Terminology Relating to Veneer and Plywood |
US$75.00
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.