ASTM G 46 : 1994 : R2018

Current

Current The latest, up-to-date edition.

Standard Guide for Examination and Evaluation of Pitting Corrosion

Publisher: American Society for Testing and Materials

Published: 11-06-2018

Available Formats: PDF - English, Hardcopy - English
More Info on product formats

Abstract - (Show below) - (Hide below)

CONTAINED IN VOL. 03.02, 2015 Defines the selection of procedures that can be used in the identification and examination of pits and in the evaluation of pitting corrosion to evaluate the extent of its effect.

Scope - (Show below) - (Hide below)

1.1This guide covers the selection of procedures that can be used in the identification and examination of pits and in the evaluation of pitting (See Terminology G15) corrosion to determine the extent of its effect.

1.2This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.3This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

General Product Information - (Show below) - (Hide below)

Published
Document Type	Guide
Status	Current
Publisher	American Society for Testing and Materials
Pages
ISBN
Committee	G 01
Supersedes	ASTM G 46 : 1994 : R2013
Superseded By	ASTM G 46 : 1994 : R2013 ASTM G 46 : 1994 : R2005 ASTM G 46 : 1994 : R1999

Standards Referenced By This Book - (Show below) - (Hide below)

ASTM G 161 : 2000 : R2018	Standard Guide for Corrosion-Related Failure Analysis
ASTM F 2111 : 2001 : REV A : R2017	Standard Practice for Measuring Intergranular Attack or End Grain Pitting on Metals Caused by Aircraft Chemical Processes
ASTM G 109 : 2007 : R2013	Standard Test Method for Determining Effects of Chemical Admixtures on Corrosion of Embedded Steel Reinforcement in Concrete Exposed to Chloride Environments
ASTM C 1617 : 2015-04	PRACTICE FOR QUANTITATIVE ACCELERATED LABORATORY EVALUATION OF EXTRACTION SOLUTIONS CONTAINING IONS LEACHED FROM THERMAL INSULATION ON AQUEOUS CORROSION OF METALS
SAE CRP-4 : 1992	RECOMMENDED METHODS FOR CONDUCTING CORROSION TESTS IN GASOLINE/METHANOL FUEL MIXTURES
ASTM F 2111 : 2001	Standard Practice for Measuring Intergranular Attack or End Grain Pitting on Metals Caused by Aircraft Chemical Processes
ASTM G 185 : 2006 : R2016	Standard Practice for Evaluating and Qualifying Oil Field and Refinery Corrosion Inhibitors Using the Rotating Cylinder Electrode
ASTM G 162 : 1999 : R2004	Standard Practice for Conducting and Evaluating Laboratory Corrosions Tests in Soils
ASTM G 33 : 1999 : R2004	Standard Practice for Recording Data from Atmospheric Corrosion Tests of Metallic-Coated Steel Specimens
ASTM G 189 : 2007 : R2013	Standard Guide for Laboratory Simulation of Corrosion Under Insulation
BS EN ISO 16784-2 : 2008	CORROSION OF METALS AND ALLOYS - CORROSION AND FOULING IN INDUSTRIAL COOLING WATER SYSTEMS - PART 2: EVALUATION OF THE PERFORMANCE OF COOLING WATER TREATMENT PROGRAMMES USING A PILOT-SCALE TEST RIG
SAE AMS 2485 : 2016	COATING, BLACK OXIDE
ASTM G 184 : 2006	Standard Practice for Evaluating and Qualifying Oil Field and Refinery Corrosion Inhibitors Using Rotating Cage
ASTM G 33 : 1999 : R2010	Standard Practice for Recording Data from Atmospheric Corrosion Tests of Metallic-Coated Steel Specimens
ASTM G 78 : 2015 : REDLINE	Standard Guide for Crevice Corrosion Testing of Iron-Base and Nickel-Base Stainless Alloys in Seawater and Other Chloride-Containing Aqueous Environments
ASTM G 1 : 2003 : R2011	Standard Practice for Preparing, Cleaning, and Evaluating Corrosion Test Specimens
ASTM G 107 : 1995 : R2008	Standard Guide for Formats for Collection and Compilation of Corrosion Data for Metals for Computerized Database Input
ASTM G 208 : 2012	Standard Practice for Evaluating and Qualifying Oilfield and Refinery Corrosion Inhibitors Using Jet Impingement Apparatus
NACE TM 01 69 : 2012	LABORATORY IMMERSION CORROSION TESTING OF METALS
NACE RP 07 75 : 2005	PREPARATION, INSTALLATION, ANALYSIS, AND INTERPRETATION OF CORROSION COUPONS IN OILFIELD OPERATIONS
ASTM G 31 : 2012 : REV A	GUIDE FOR LABORATORY IMMERSION CORROSION TESTING OF METALS
ASTM G 33 : 1999 : R2015	Standard Practice for Recording Data from Atmospheric Corrosion Tests of Metallic-Coated Steel Specimens
ASTM G 87 : 2002 : R2007	Standard Practice for Conducting Moist SO₂ Tests
NACE TM 04 99 : 2009	IMMERSION CORROSION TESTING OF CERAMIC MATERIALS
(INACTIVE RECORD)ASTM G 184 : 2006	PRACTICE FOR EVALUATING AND QUALIFYING OIL FIELD AND REFINERY CORROSION INHIBITORS USING ROTATING CAGE
ASTM G 71 : 1981 : R2014	Standard Guide for Conducting and Evaluating Galvanic Corrosion Tests in Electrolytes
ASTM G 52 : 2000 : R2006	Standard Practice for Exposing and Evaluating Metals and Alloys in Surface Seawater
ASTM G 48 : 2011	: Standard Test Methods for Pitting and Crevice Corrosion Resistance of Stainless Steels and Related Alloys by Use of Ferric Chloride Solution
ASTM G 199 : 2009 : R2014	Standard Guide for Electrochemical Noise Measurement
ASTM G 52 : 2000 : R2016 : EDT 1	Standard Practice for Exposing and Evaluating Metals and Alloys in Surface Seawater
ASTM G 1 : 2003	PRACTICE FOR PREPARING, CLEANING, AND EVALUATING CORROSION TEST SPECIMENS
DIN EN ISO 16784-2 : 2008	CORROSION OF METALS AND ALLOYS - CORROSION AND FOULING IN INDUSTRIAL COOLING WATER SYSTEMS - PART 2: EVALUATION OF THE PERFORMANCE OF COOLING WATER TREATMENT PROGRAMMES USING A PILOT-SCALE TEST RIG
NACE SP 06 90 : 2009	STANDARD FORMAT FOR COLLECTION AND COMPILATION OF DATA FOR COMPUTERIZED MATERIAL CORROSION RESISTANCE DATABASE INPUT
NACE SP 04 15 : 2015	BELOW-GRADE INSPECTION AND ASSESSMENT OF CORROSION ON STEEL TRANSMISSION, DISTRIBUTION, AND SUBSTATION STRUCTURES
ASTM F 2111 : 2001	PRACTICE FOR MEASURING INTERGRANULAR ATTACK OR END GRAIN PITTING ON METALS CAUSED BY AIRCRAFT CHEMICAL PROCESSES
ASTM G 4 : 2001	Standard Guide for Conducting Corrosion Tests in Field Applications
ASTM G 1 : 2003	Standard Practice for Preparing, Cleaning, and Evaluating Corrosion Test Specimens
DIN EN ISO 16784-2 E : 2008	CORROSION OF METALS AND ALLOYS - CORROSION AND FOULING IN INDUSTRIAL COOLING WATER SYSTEMS - PART 2: EVALUATION OF THE PERFORMANCE OF COOLING WATER TREATMENT PROGRAMMES USING A PILOT-SCALE TEST RIG
ASTM G 87 : 2002	Standard Practice for Conducting Moist SO₂ Tests
(INVALID RECORD)ASTM G 170 : 2006	GUIDE FOR EVALUATING AND QUALIFYING OILFIELD AND REFINERY CORROSION INHIBITORS IN THE LABORATORY
NACE SP 07 75 : 2013	PREPARATION, INSTALLATION, ANALYSIS, AND INTERPRETATION OF CORROSION COUPONS IN OILFIELD OPERATIONS
ASTM G 33 : 1999	Standard Practice for Recording Data from Atmospheric Corrosion Tests of Metallic-Coated Steel Specimens
BS ISO 16784-2 : 2006	CORROSION OF METALS AND ALLOYS - CORROSION AND FOULING IN INDUSTRIAL COOLING WATER SYSTEMS - PART 2: EVALUATION OF THE PERFORMANCE OF COOLING WATER TREATMENT PROGRAMMES USING A PILOT-SCALE TEST RIG
ASTM F 2111 : 2001 : REV A : R2011	Standard Practice for Measuring Intergranular Attack or End Grain Pitting on Metals Caused by Aircraft Chemical Processes
ASTM G 4 : 2001 : R2008	Standard Guide for Conducting Corrosion Tests in Field Applications
ASTM G 170 : 2006 : R2012	Standard Guide for Evaluating and Qualifying Oilfield and Refinery Corrosion Inhibitors in the Laboratory
ASTM G 161 : 2000 : R2013	Standard Guide for Corrosion-Related Failure Analysis
ASTM G 150 : 2013	Standard Test Method for Electrochemical Critical Pitting Temperature Testing of Stainless Steels
ASTM G 71 : 1981 : R2003	Standard Guide for Conducting and Evaluating Galvanic Corrosion Tests in Electrolytes
ASTM G 52:2000	PRACTICE FOR EXPOSING AND EVALUATING METALS AND ALLOYS IN SURFACE SEAWATER
ASTM G 185 : 2006 : R2012	Standard Practice for Evaluating and Qualifying Oil Field and Refinery Corrosion Inhibitors Using the Rotating Cylinder Electrode
ASTM G 208:2012	PRACTICE FOR EVALUATING AND QUALIFYING OILFIELD AND REFINERY CORROSION INHIBITORS USING JET IMPINGEMENT APPARATUS
ASTM G 184 : 2006 : R2012	Standard Practice for Evaluating and Qualifying Oil Field and Refinery Corrosion Inhibitors Using Rotating Cage
API TR 17TR6 : 2015	ATTRIBUTES OF PRODUCTION CHEMICALS IN SUBSEA PRODUCTION SYSTEMS
ASTM G 202:2012	TEST METHOD FOR USING ATMOSPHERIC PRESSURE ROTATING CAGE
ASTM G 111 : 1997	Standard Guide for Corrosion Tests in High Temperature or High Pressure Environment, or Both
ASTM G 16 : 2013-12	GUIDE FOR APPLYING STATISTICS TO ANALYSIS OF CORROSION DATA
ASTM G 31 : 2012	GUIDE FOR LABORATORY IMMERSION CORROSION TESTING OF METALS
ASTM D 6208 : 2007 : R2014	Standard Test Method for Repassivation Potential of Aluminum and Its Alloys by Galvanostatic Measurement
ASTM G 161 : 2000 : R2006	Standard Guide for Corrosion-Related Failure Analysis
ASTM G 71 : 1981 : R2009	Standard Guide for Conducting and Evaluating Galvanic Corrosion Tests in Electrolytes
ASTM G 157 : 1998	Standard Guide for Evaluating the Corrosion Properties of Wrought Iron- and Nickel-Based Corrosion Resistant Alloys for the Chemical Process Industries
IEEE 1895 : 2014	BELOW-GRADE INSPECTION AND ASSESSMENT OF CORROSION ON STEEL TRANSMISSION, DISTRIBUTION, AND SUBSTATION STRUCTURES
ASTM G 50:2010	PRACTICE FOR CONDUCTING ATMOSPHERIC CORROSION TESTS ON METALS
ASTM G 111 : 1997 : R2006	Standard Guide for Corrosion Tests in High Temperature or High Pressure Environment, or Both
ASTM D 6208 : 2007	Standard Test Method for Repassivation Potential of Aluminum and Its Alloys by Galvanostatic Measurement
ASTM G 111 : 1997 : R2018	Standard Guide for Corrosion Tests in High Temperature or High Pressure Environment, or Both
ASTM G 87 : 2002(R2018)	Standard Practice for Conducting Moist SO2 Tests
NACE 24238 : 2009	MONITORING AND ADJUSTMENT OF COOLING WATER TREATMENT OPERATING PARAMETERS
ASTM G 87 : 2002 : R2013	Standard Practice for Conducting Moist SO2 Tests
ASTM G 162 : 1999 : R2010	Standard Practice for Conducting and Evaluating Laboratory Corrosions Tests in Soils
ASTM G 71 : 1981 : R1998 : EDT 1	Standard Guide for Conducting and Evaluating Galvanic Corrosion Tests in Electrolytes
ASTM G 52 : 2000 : R2011	Standard Practice for Exposing and Evaluating Metals and Alloys in Surface Seawater
(INACTIVE RECORD)ASTM G 107 : 1995	GUIDE FOR FORMATS FOR COLLECTION AND COMPILATION OF CORROSION DATA FOR METALS FOR COMPUTERIZED DATABASE INPUT
ASME FFS 1 : 2007	FITNESS-FOR-SERVICE
NACE RP 06 90 : 2004	STANDARD FORMAT FOR COLLECTION AND COMPILATION OF DATA FOR COMPUTERIZED MATERIAL CORROSION RESISTANCE DATABASE INPUT
API 579-1 : 2016	FITNESS-FOR-SERVICE
API TR 17TR8 : 2018	HIGH-PRESSURE HIGH-TEMPERATURE DESIGN GUIDELINES
SAE J 2800 : 2007	LABORATORY CORROSION/FATIGUE TESTING OF VEHICLE SUSPENSION COIL SPRINGS
ASTM G 157 : 1998 : R2005	Standard Guide for Evaluating the Corrosion Properties of Wrought Iron- and Nickel-Based Corrosion Resistant Alloys for the Chemical Process Industries
ASTM G 104 : 0	TEST METHOD FOR ASSESSING GALVANIC CORROSION CAUSED BY THE ATMOSPHERE
I.S. EN ISO 16784-2:2008	CORROSION OF METALS AND ALLOYS - CORROSION AND FOULING IN INDUSTRIAL COOLING WATER SYSTEMS - PART 2: EVALUATION OF THE PERFORMANCE OF COOLING WATER TREATMENT PROGRAMMES USING A PILOT-SCALE TEST RIG
ASTM G 1 : 2003 : R2017 : EDT 1	Standard Practice for Preparing, Cleaning, and Evaluating Corrosion Test Specimens
ASTM G 157 : 1998 : R2013	Standard Guide for Evaluating Corrosion Properties of Wrought Iron- and Nickel-Based Corrosion Resistant Alloys for Chemical Process Industries
API 17F : 2017	SUBSEA PRODUCTION CONTROL SYSTEMS
NACE 11106 : 0	MONITORING AND ADJUSTMENT OF COOLING WATER TREATMENT OPERATING PARAMETERS
ASTM F 2111 : 2001 : REV A	Standard Practice for Measuring Intergranular Attack or End Grain Pitting on Metals Caused by Aircraft Chemical Processes
ASTM G 52 : 2000	Standard Practice for Exposing and Evaluating Metals and Alloys in Surface Seawater
ASTM G 109 : 2007	TEST METHOD FOR DETERMINING EFFECTS OF CHEMICAL ADMIXTURES ON CORROSION OF EMBEDDED STEEL REINFORCEMENT IN CONCRETE EXPOSED TO CHLORIDE ENVIRONMENTS
(INACTIVE RECORD)ASTM F 1110 : 2009	TEST METHOD FOR SANDWICH CORROSION TEST
ASTM G 109 : 2007	Standard Test Method for Determining Effects of Chemical Admixtures on Corrosion of Embedded Steel Reinforcement in Concrete Exposed to Chloride Environments
ASTM G 161 : 2000	Standard Guide for Corrosion-Related Failure Analysis
ASTM G 111 : 1997 : R2013	Standard Guide for Corrosion Tests in High Temperature or High Pressure Environment, or Both
NACE RP 04 97 : 2004	FIELD CORROSION EVALUATION USING METALLIC TEST SPECIMENS
ASTM C 1187 : 2015 : REDLINE	Standard Guide for Establishing Surveillance Test Program for Boron-Based Neutron Absorbing Material Systems for Use in Nuclear Fuel Storage Racks In a Pool Environment
ASTM G 162 : 1999	Standard Practice for Conducting and Evaluating Laboratory Corrosions Tests in Soils
ASTM G 33:1999	PRACTICE FOR RECORDING DATA FROM ATMOSPHERIC CORROSION TESTS OF METALLIC-COATED STEEL SPECIMENS
ASTM G 184 : 2006 : R2016	Standard Practice for Evaluating and Qualifying Oil Field and Refinery Corrosion Inhibitors Using Rotating Cage
ASTM F 3268 : 2018	Standard Guide for in vitro Degradation Testing of Absorbable Metals
ASTM G 4 : 2001 : R2014	Standard Guide for Conducting Corrosion Tests in Field Applications
ASTM G 107 : 1995 : R2015	Standard Guide for Formats for Collection and Compilation of Corrosion Data for Metals for Computerized Database Input
ASTM G 185 :2006	Standard Practice for Evaluating and Qualifying Oil Field and Refinery Corrosion Inhibitors Using the Rotating Cylinder Electrode
ASTM G 31 : 2012	GUIDE FOR LABORATORY IMMERSION CORROSION TESTING OF METALS
NACE 31014 : 0	FIELD MONITORING OF CORROSION RATES IN OIL AND GAS PRODUCTION ENVIRONMENTS USING ELECTROCHEMICAL TECHNIQUES
ASTM G 217 : 2016	Standard Guide for Corrosion Monitoring in Laboratories and Plants with Coupled Multielectrode Array Sensor Method
ASTM G 170 :2006	Standard Guide for Evaluating and Qualifying Oilfield and Refinery Corrosion Inhibitors in the Laboratory
ASTM G 208 : 2012 : R2016	Standard Practice for Evaluating and Qualifying Oilfield and Refinery Corrosion Inhibitors Using Jet Impingement Apparatus
ASTM F 1110 : 2009 : R2014	Standard Test Method for Sandwich Corrosion Test
ASTM F 2111 : 2001 : REV A : R2005 : EDT 1	Standard Practice for Measuring Intergranular Attack or End Grain Pitting on Metals Caused by Aircraft Chemical Processes
ASTM G 189 : 2007	Standard Guide for Laboratory Simulation of Corrosion Under Insulation
(INVALID RECORD)ASTM G 185 : 2006	PRACTICE FOR EVALUATING AND QUALIFYING OIL FIELD AND REFINERY CORROSION INHIBITORS USING THE ROTATING CYLINDER ELECTRODE
ASTM G 199 : 2009	GUIDE FOR ELECTROCHEMICAL NOISE MEASUREMENT
ASTM G 202 : 2012 : R2016	Standard Test Method for Using Atmospheric Pressure Rotating Cage
ASTM G 199:2009	Standard Guide for Electrochemical Noise Measurement
ASTM G 189 : 2007	GUIDE FOR LABORATORY SIMULATION OF CORROSION UNDER INSULATION
ASTM G 202 : 2012	Standard Test Method for Using Atmospheric Pressure Rotating Cage
ASTM G 157 : 1998 : R2018	Standard Guide for Evaluating Corrosion Properties of Wrought Iron- and Nickel-Based Corrosion Resistant Alloys for Chemical Process Industries
ASTM G 107 :1995	Standard Guide for Formats for Collection and Compilation of Corrosion Data for Metals for Computerized Database Input
ASTM G 50 : 2010 : R2015	Standard Practice for Conducting Atmospheric Corrosion Tests on Metals
ASTM F 3044 : 2014	Test Method for Standard Test Method for Evaluating the Potential for Galvanic Corrosion for Medical Implants
(INACTIVE RECORD)ASTM G 48 : 2011	TEST METHODS FOR PITTING AND CREVICE CORROSION RESISTANCE OF STAINLESS STEELS AND RELATED ALLOYS BY USE OF FERRIC CHLORIDE SOLUTION
ASTM G 162 : 1999	PRACTICE FOR CONDUCTING AND EVALUATING LABORATORY CORROSIONS TESTS IN SOILS
ASTM G 48 : 2011 : R2015	Standard Test Methods for Pitting and Crevice Corrosion Resistance of Stainless Steels and Related Alloys by Use of Ferric Chloride Solution
ASTM G 107 : 1995 : R2002	Standard Guide for Formats for Collection and Compilation of Corrosion Data for Metals for Computerized Database Input
ASTM F 1110 : 2009	Standard Test Method for Sandwich Corrosion Test
ASTM D 6208:2007	TEST METHOD FOR REPASSIVATION POTENTIAL OF ALUMINUM AND ITS ALLOYS BY GALVANOSTATIC MEASUREMENT
ASTM G 50 : 2010	Standard Practice for Conducting Atmospheric Corrosion Tests on Metals
ASTM G 71 : 1981	GUIDE FOR CONDUCTING AND EVALUATING GALVANIC CORROSION TESTS IN ELECTROLYTES
ISO 16784-2 : 2006(R2014)	CORROSION OF METALS AND ALLOYS - CORROSION AND FOULING IN INDUSTRIAL COOLING WATER SYSTEMS - PART 2: EVALUATION OF THE PERFORMANCE OF COOLING WATER TREATMENT PROGRAMMES USING A PILOT-SCALE TEST RIG
NASA MSFC SPEC 1870 : 2005	GUIDELINES FOR EVALUATION OF CORROSION INHIBITING PRESERVATIVES

Standards Referencing This Book - (Show below) - (Hide below)

ASTM G 1 : 2003	PRACTICE FOR PREPARING, CLEANING, AND EVALUATING CORROSION TEST SPECIMENS
ASTM G 16 : 2013-12	GUIDE FOR APPLYING STATISTICS TO ANALYSIS OF CORROSION DATA
NACE RP 01 1973 : 1973	COLLECTION AND IDENTIFICATION OF CORROSION PRODUCTS
ASTM E 3 : 2011	GUIDE FOR PREPARATION OF METALLOGRAPHIC SPECIMENS
ASTM G 15 : 2008-05	TERMINOLOGY RELATING TO CORROSION AND CORROSION TESTING

Add To Cart

Product Format

Quantity

add to cart

ASTM G 46 : 1994 : R2018

Abstract - (Show below) - (Hide below)

Scope - (Show below) - (Hide below)

General Product Information - (Show below) - (Hide below)

Standards Referenced By This Book - (Show below) - (Hide below)

Standards Referencing This Book - (Show below) - (Hide below)

Add To Cart

Publisher

Category

Sub Category

Access your standards online with a subscription?