EN 60068-3-1:2011
|
Environmental testing - Part 3-1: Supporting documentation and guidance - Cold and dry heat tests
|
ISO 7005-2:1988
|
Metallic flanges — Part 2: Cast iron flanges
|
IEC 60068-1:2013
|
Environmental testing - Part 1: General and guidance
|
EN 14154-1:2005+A2:2011
|
Water meters - Part 1: General requirements
|
IEC 61000-4-4 : 3.0EN+(REDLINE+VERSION)
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-4: TESTING AND MEASUREMENT TECHNIQUES - ELECTRICAL FAST TRANSIENT/BURST IMMUNITY TEST
|
IEC 60068-3-1A:1978
|
Environmental testing - Part 3: Background information - First supplement
|
EN 61000-4-11:2004/A1:2017
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-11: TESTING AND MEASUREMENT TECHNIQUES - VOLTAGE DIPS, SHORT INTERRUPTIONS AND VOLTAGE VARIATIONS IMMUNITY TESTS (IEC 61000-4-11:2004/A1:2017)
|
EN 60068-2-1:2007
|
Environmental testing - Part 2-1: Tests - Test A: Cold
|
IEC 60068-3-1:2011
|
Environmental testing - Part 3-1: Supporting documentation and guidance - Cold and dry heat tests
|
EN 60068-2-2:2007
|
Environmental testing - Part 2-2: Tests - Test B: Dry heat
|
IEC 61000-4-11:2004+AMD1:2017 CSV
|
Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests
|
EN 60068-1:2014
|
Environmental testing - Part 1: General and guidance
|
ISO 7005-3:1988
|
Metallic flanges Part 3: Copper alloy and composite flanges
|
EN 60068-2-64:2008
|
ENVIRONMENTAL TESTING - PART 2-64: TESTS - TEST FH: VIBRATION, BROADBAND RANDOM AND GUIDANCE
|
IEC 61000-4-4:2012 RLV
|
Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test
|
ISO 3:1973
|
Preferred numbers Series of preferred numbers
|
EN 61000-4-2:2009
|
Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test
|
EN 1717:2000
|
Protection against pollution of potable water in water installations and general requirements of devices to prevent pollution by backflow
|
IEC 60068-2-31:2008
|
Environmental testing - Part 2-31: Tests - Test Ec: Rough handling shocks, primarily for equipment-type specimens
|
IEC 60068-2-64:2008
|
Environmental testing - Part 2-64: Tests - Test Fh: Vibration, broadband random and guidance
|
EN 61000-4-3 : 2006 AMD 2 2010
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-3: TESTING AND MEASUREMENT TECHNIQUES - RADIATED, RADIO-FREQUENCY, ELECTROMAGNETIC FIELD IMMUNITY TEST
|
EN ISO 6708:1995
|
Pipework components - Definition and selection of DN (nominal size) (ISO 6708:1995)
|
IEC 60068-2-47:2005
|
Environmental testing - Part 2-47: Test - Mounting of specimens for vibration, impact and similar dynamic tests
|
EN 14154-3:2005+A2:2011
|
Water meters - Part 3: Test methods and equipment
|
IEC 60068-2-2:2007
|
Environmental testing - Part 2-2: Tests - Test B: Dry heat
|
IEC 61000-4-2:2008
|
Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test
|
IEC 61000-4-3:2006+AMD1:2007+AMD2:2010 CSV
|
Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test
|
IEC 60068-2-2a:1976
|
Supplement A - Basic environmental testing procedures - Part 2: Tests - Tests B: Dry heat
|
EN 1333:2006
|
Flanges and their joints - Pipework components - Definition and selection of PN
|
EN 61000-4-4:2012
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-4: TESTING AND MEASUREMENT TECHNIQUES - ELECTRICAL FAST TRANSIENT/BURST IMMUNITY TEST (IEC 61000-4-4:2012)
|
IEC 60068-2-1:2007
|
Environmental testing - Part 2-1: Tests - Test A: Cold
|
IEC 60068-3-4:2001
|
Environmental testing - Part 3-4: Supporting documentation and guidance - Damp heat tests
|
EN 60068-2-30:2005
|
Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)
|
ISO 4006:1991
|
Measurement of fluid flow in closed conduits — Vocabulary and symbols
|
ISO 228-1:2000
|
Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation
|
ISO/IEC Guide 98-3:2008
|
Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995)
|
EN 60068-2-31:2008
|
ENVIRONMENTAL TESTING - PART 2-31: TESTS - TEST EC: ROUGH HANDLING SHOCKS, PRIMARILY FOR EQUIPMENT-TYPE SPECIMENS
|
EN 60068-2-47:2005
|
Environmental testing - Part 2-47: Tests - Mounting of specimens for vibration, impact and similar dynamic tests
|
IEC 60068-2-30:2005
|
Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)
|