• There are no items in your cart

I.S. EN ISO 14224:2016

Current
Current

The latest, up-to-date edition.

PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - COLLECTION AND EXCHANGE OF RELIABILITY AND MAINTENANCE DATA FOR EQUIPMENT (ISO 14224:2016)
Published date

01-01-2016

National Foreword
European foreword
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Abbreviated terms
5 Application
6 Benefits of RM data collection
  and exchange
7 Quality of data
8 Equipment boundary, taxonomy and
  time definitions
9 Recommended data for equipment, failures
  and maintenance
Annex A (informative) - Equipment-class attributes
Annex B (normative) - Interpretation and notation
        of failure and maintenance parameters
Annex C (informative) - Guide to interpretation and
        calculation of derived reliability and maintenance
        parameters
Annex D (informative) - Typical requirements for data
Annex E (informative) - Key performance indicators
        (KPIs) and benchmarking
Annex F (informative) - Classification and definition
        of safety critical failures
Bibliography

Gives a comprehensive basis for the collection of reliability and maintenance (RM) data in a standard format for equipment in all facilities and operations within the petroleum, natural gas and petrochemical industries during the operational life cycle of equipment.

DocumentType
Standard
PublisherName
National Standards Authority of Ireland
Status
Current
Supersedes

ISO 15663-3:2001 Petroleum and natural gas industries Life-cycle costing Part 3: Implementation guidelines
IEC 61025:2006 Fault tree analysis (FTA)
ISO 15551-1:2015 Petroleum and natural gas industries — Drilling and production equipment — Part 1: Electric submersible pump systems for artificial lift
API 12F : 2008 SPECIFICATION FOR SHOP WELDED TANKS FOR STORAGE OF PRODUCTION LIQUIDS
IEC 62271-100:2008+AMD1:2012+AMD2:2017 CSV High-voltage switchgear and controlgear - Part 100: Alternating-current circuit-breakers
API SPEC 12D : 2017 SPECIFICATION FOR FIELD-WELDED TANKS FOR STORAGE OF PRODUCTION LIQUIDS
IEC 61800-3:2017 Adjustable speed electrical power drive systems - Part 3: EMC requirements and specific test methods
ISO 13707:2000 Petroleum and natural gas industries Reciprocating compressors
IEC 62551:2012 Analysis techniques for dependability - Petri net techniques
BS 4999-140:1987 General requirements for rotating electrical machines Specification for voltage regulation and parallel operation of a.c. synchronous generators
ISO 15663-2:2001 Petroleum and natural gas industries Life-cycle costing Part 2: Guidance on application of methodology and calculation methods
IEC 60038:2009 IEC standard voltages
IEEE 1566-2015 REDLINE IEEE Standard for Performance of Adjustable-Speed AC Drives Rated 375 kW and Larger
IEC 60076-7:2005 Power transformers - Part 7: Loading guide for oil-immersed power transformers
ISO 15663-1:2000 Petroleum and natural gas industries Life cycle costing Part 1: Methodology
ISO 15649:2001 Petroleum and natural gas industries — Piping
IEEE C37.102-2006 REDLINE IEEE Guide for AC Generator Protection
IEC 61800-2:2015 Adjustable speed electrical power drive systems - Part 2: General requirements - Rating specifications for low voltage adjustable speed a.c. power drive systems
IEC 61800-4:2002 Adjustable speed electrical power drive systems - Part 4: General requirements - Rating specifications for a.c. power drive systems above 1 000 V a.c. and not exceeding 35 kV
ISO 13710:2004 Petroleum, petrochemical and natural gas industries Reciprocating positive displacement pumps
IEEE 1202-2006 IEEE Standard for Flame-Propagation Testing of Wire & Cable
IEEE C37.13.1-2006 IEEE Standard for Definite Purpose Switching Devices for Use in Metal-Enclosed Low-Voltage Power Circuit Breaker Switchgear
API 617 DATA SHEET : 2014 AXIAL AND CENTRIFUGAL COMPRESSORS AND EXPANDER-COMPRESSORS
API 560 : 2016 FIRED HEATERS FOR GENERAL REFINERY SERVICE
IEC 61123:1991 Reliability testing - Compliance test plans for success ratio
C88-16 Power transformers and reactors
IEC 62271-200:2011 High-voltage switchgear and controlgear - Part 200: AC metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV
ISO 19900:2013 Petroleum and natural gas industries General requirements for offshore structures
ISO 10442:2002 Petroleum, chemical and gas service industries Packaged, integrally geared centrifugal air compressors
ISO 16708:2006 Petroleum and natural gas industries — Pipeline transportation systems — Reliability-based limit state methods
API 661 : 2015 PETROLEUM, PETROCHEMICAL, AND NATURAL GAS INDUSTRIES - AIR-COOLED HEAT EXCHANGERS
ISO 13624-1:2009 Petroleum and natural gas industries Drilling and production equipment Part 1: Design and operation of marine drilling riser equipment
ISO 16904:2016 Petroleum and natural gas industries Design and testing of LNG marine transfer arms for conventional onshore terminals
IEC 60605-4:2001 Equipment reliability testing - Part 4: Statistical procedures for exponential distribution - Point estimates, confidence intervals, prediction intervals and tolerance intervals
API 616 : 2011 GAS TURBINES FOR THE PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
SAE JA 1012 : 2011 A GUIDE TO THE RELIABILITY-CENTERED MAINTENANCE (RCM) STANDARD
ISO 13628-1:2005 Petroleum and natural gas industries — Design and operation of subsea production systems — Part 1: General requirements and recommendations
ISO 15547-1:2005 Petroleum, petrochemical and natural gas industries — Plate-type heat exchangers — Part 1: Plate-and-frame heat exchangers
ISO 15138:2007 Petroleum and natural gas industries Offshore production installations Heating, ventilation and air-conditioning
IEC 62740:2015 Root cause analysis (RCA)
NORSOK C-004:2013 HELICOPTER DECK ON OFFSHORE INSTALLATIONS
SAE JA 1011 : 2009 EVALUATION CRITERIA FOR RELIABILITY-CENTERED MAINTENANCE (RCM) PROCESSES
IEC 60502:1994 Extruded solid dielectric insulated power cables for rated voltages from 1 kV up to 30 kV
ISO 8528-8:2016 Reciprocating internal combustion engine driven alternating current generating sets — Part 8: Requirements and tests for low-power generating sets
API 17F : 2014 SUBSEA PRODUCTION CONTROL SYSTEMS
ISO 8528-3:2005 Reciprocating internal combustion engine driven alternating current generating sets Part 3: Alternating current generators for generating sets
IEC 60947-4-1:2009+AMD1:2012 CSV Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters
ISO 8528-2:2005 Reciprocating internal combustion engine driven alternating current generating sets Part 2: Engines
IEC 60319:1999 Presentation and specification of reliability data for electronic components
ISO 15136-1:2009 Petroleum and natural gas industries — Progressing cavity pump systems for artificial lift — Part 1: Pumps
UL 1072:4ED 2006-06 Medium-Voltage Power Cables
API 611 DATA SHEET : 0 GENERAL-PURPOSE STEAM TURBINES FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
API 5CT : 2012 CASING AND TUBING
IEC 61511-1:2016+AMD1:2017 CSV Functional safety - Safety instrumented systems for the process industry sector - Part 1: Framework, definitions, system, hardware and application programming requirements
ICEA S 93 639 : 2012 5-46 KV SHIELDED POWER CABLE FOR USE IN THE TRANSMISSION AND DISTRIBUTION OF ELECTRIC ENERGY
IEC 60812:2006 Analysis techniques for system reliability - Procedure for failure mode and effects analysis (FMEA)
IEC 60300-3-3:2017 Dependability management - Part 3-3: Application guide - Life cycle costing
ISO 13631:2002 Petroleum and natural gas industries Packaged reciprocating gas compressors
IEC 61649:2008 Weibull analysis
API 560 DATA SHEET : 0 FIRED HEATERS FOR GENERAL REFINERY SERVICE
NORSOK R 002 : 2017 LIFTING EQUIPMENT
IEC 60300-3-12:2011 Dependability management - Part 3-12: Application guide - Integrated logistic support
API 612 DATA SHEET : 2014 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - STEAM TURBINES - SPECIAL-PURPOSE APPLICATIONS
ISO 13628-15:2011 Petroleum and natural gas industries — Design and operation of subsea production systems — Part 15: Subsea structures and manifolds
ISO 16812:2007 Petroleum, petrochemical and natural gas industries Shell-and-tube heat exchangers
ISO 10437:2003 Petroleum, petrochemical and natural gas industries — Steam turbines — Special-purpose applications
API 520-1 : 2014 SIZING, SELECTION, AND INSTALLATION OF PRESSURE-RELIEVING DEVICES - PART 1: SIZING AND SELECTION
IEC 60300-3-14:2004 Dependability management - Part 3-14: Application guide - Maintenance and maintenance support
IEC 60300-3-4:2007 Dependability management - Part 3-4: Application guide - Guide to the specification of dependability requirements
ISO 8528-6:2005 Reciprocating internal combustion engine driven alternating current generating sets — Part 6: Test methods
ISO 15547-2:2005 Petroleum, petrochemical and natural gas industries — Plate-type heat exchangers — Part 2: Brazed aluminium plate-fin heat exchangers
IEC 60605-6:2007 Equipment reliability testing - Part 6: Tests for the validity and estimation of the constant failure rate and constant failure intensity
API 2000 : 2014 VENTING ATMOSPHERIC AND LOW-PRESSURE STORAGE TANKS
ISO 10439-3:2015 Petroleum, petrochemical and natural gas industries Axial and centrifugal compressors and expander-compressors Part 3: Integrally geared centrifugal compressors
IMO IE110 : 2009 SOLAS (CONSOLIDATED EDITION)
API 6A : 2010 SPECIFICATION FOR WELLHEAD AND CHRISTMAS TREE EQUIPMENT
ISO 13679:2002 Petroleum and natural gas industries Procedures for testing casing and tubing connections
API 609 : 2016 BUTTERFLY VALVES: DOUBLE-FLANGED, LUG- AND WAFER-TYPE
IEC 60706-3:2006 Maintainability of equipment - Part 3: Verification and collection, analysis and presentation of data
IEC/ISO 31010:2009 Risk management - Risk assessment techniques
ISO 31000:2009 Risk management Principles and guidelines
ISO 14313:2007 Petroleum and natural gas industries — Pipeline transportation systems — Pipeline valves
ISO 19901-7:2013 Petroleum and natural gas industries — Specific requirements for offshore structures — Part 7: Stationkeeping systems for floating offshore structures and mobile offshore units
IEC 61070:1991 Compliance test procedures for steady-state availability
API 674 : 2010 POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
API 14A : 2015 SPECIFICATION FOR SUBSURFACE SAFETY VALVE EQUIPMENT
ISO 8528-5:2013 Reciprocating internal combustion engine driven alternating current generating sets Part 5: Generating sets
API 620 : 2013 DESIGN AND CONSTRUCTION OF LARGE, WELDED, LOW-PRESSURE STORAGE TANKS
IEC 60076-10:2016 Power transformers - Part 10: Determination of sound levels
IEC 61508-5:2010 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 5: Examples of methods for the determination of safety integrity levels (see Functional Safety and IEC 61508)
IEC 61078:2016 Reliability block diagrams
API 662 : 2006 PLATE HEAT EXCHANGERS FOR GENERAL REFINERY SERVICES
IEC 60076-5:2006 Power transformers - Part 5: Ability to withstand short circuit
IEC 61165:2006 Application of Markov techniques
ISO 14998:2013 Petroleum and natural gas industries — Downhole equipment — Completion accessories
IEC 61508-4:2010 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 4: Definitions and abbreviations (see Functional Safety and IEC 61508)
IEC 61508-3:2010 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 3: Software requirements (see Functional Safety and IEC 61508)
ISO 8528-4:2005 Reciprocating internal combustion engine driven alternating current generating sets — Part 4: Controlgear and switchgear
ISO 16070:2005 Petroleum and natural gas industries Downhole equipment Lock mandrels and landing nipples
IEC 60470:1999 High-voltage alternating current contactors and contactor-based motor-starters
API 650 DATA SHEET : 2013 WELDED TANKS FOR OIL STORAGE
ISO 8528-12:1997 Reciprocating internal combustion engine driven alternating current generating sets — Part 12: Emergency power supply to safety services
ISO 17776:2016 Petroleum and natural gas industries Offshore production installations Major accident hazard management during the design of new installations
ISO 15544:2000 Petroleum and natural gas industries — Offshore production installations — Requirements and guidelines for emergency response
API 610 DATA SHEET : 2010 Centrifugal Pumps for Petroleum, Petrochemical and Natural Gas Industries – Mechanical Equipment Data Sheet –
API SPEC 17J : 2014 SPECIFICATION FOR UNBONDED FLEXIBLE PIPE
NORSOK S 001 : REV 4 TECHNICAL SAFETY
IEC 61163-1:2006 Reliability stress screening - Part 1: Repairable assemblies manufactured in lots
ISO 19008:2016 Standard cost coding system for oil and gas production and processing facilities
ISO 10418:2003 Petroleum and natural gas industries Offshore production installations Analysis, design, installation and testing of basic surface process safety systems
API 541 DATA SHEET : 0 FORM-WOUND SQUIRREL CAGE INDUCTION MOTORS - 375 KW (500 HORSEPOWER) AND LARGER
NORSOK D-002 : 2013 WELL INTERVENTION EQUIPMENT
ISO 8528-10:1998 Reciprocating internal combustion engine driven alternating current generating sets — Part 10: Measurement of airborne noise by the enveloping surface method
ISO 12211:2012 Petroleum, petrochemical and natural gas industries — Spiral plate heat exchangers
API 554-1 : 2008(R2016) PROCESS CONTROL SYSTEMS - PART 1: PROCESS CONTROL SYSTEMS FUNCTIONS AND FUNCTIONAL SPECIFICATION DEVELOPMENT
IEC 60076-4:1976 Power transformers - Part 4: Tappings and connections
ISO 10417:2004 Petroleum and natural gas industries Subsurface safety valve systems Design, installation, operation and redress
API 580 : 2016 RISK-BASED INSPECTION
ISO 13354:2014 Petroleum and natural gas industries Drilling and production equipment Shallow gas diverter equipment
IEC 60076-8:1997 Power transformers - Part 8: Application guide
NFPA 15 : 2017 WATER SPRAY FIXED SYSTEMS FOR FIRE PROTECTION
IEC 60085:2007 Electrical insulation - Thermal evaluation and designation
API 521 : 2014 PRESSURE-RELIEVING AND DEPRESSURING SYSTEMS
IEC 60076-12:2008 Power transformers - Part 12: Loading guide for dry-type power transformers
IEC 61810-2:2017 Electromechanical elementary relays - Part 2: Reliability
ISO/PAS 12835:2013 Qualification of casing connections for thermal wells
ISO 28460:2010 Petroleum and natural gas industries Installation and equipment for liquefied natural gas Ship-to-shore interface and port operations
IEC 62040-2:2016 Uninterruptible power systems (UPS) - Part 2: Electromagnetic compatibility (EMC) requirements
API 676 DATA SHEET : 0 POSITIVE DISPLACEMENT PUMPS - ROTARY
API 619 DATA SHEET : 2013 ROTARY-TYPE POSITIVE-DISPLACEMENT COMPRESSORS FOR PETROLEUM, PETROCHEMICAL, AND NATURAL GAS INDUSTRIES
IEC 60300-3-2:2004 Dependability management - Part 3-2: Application guide - Collection of dependability data from the field
ISO 2314:2009 Gas turbines — Acceptance tests
IEC 61124:2012 Reliability testing - Compliance tests for constant failure rate and constant failure intensity
IEC 61511-3:2016 Functional safety - Safety instrumented systems for the process industry sector - Part 3: Guidance for the determination of the required safety integrity levels
ISO 13628-7:2005 Petroleum and natural gas industries — Design and operation of subsea production systems — Part 7: Completion/workover riser systems
ISO 10439-2:2015 Petroleum, petrochemical and natural gas industries Axial and centrifugal compressors and expander-compressors Part 2: Non-integrally geared centrifugal and axial compressors
IEC 60146-1-1:2009 Semiconductor converters - General requirements and line commutated converters - Part 1-1: Specification of basic requirements
IEC 62114:2001 Electrical Insulation Systems - Thermal classification
BS 4778-3.1:1991 Quality vocabulary. Availability, reliability and maintainability terms Guide to concepts and related definitions
API 617 : 2014 AXIAL AND CENTRIFUGAL COMPRESSORS AND EXPANDER-COMPRESSORS
IEC 60076-3:2013 Power transformers - Part 3: Insulation levels, dielectric tests and external clearances in air
ISO 12212:2012 Petroleum, petrochemical and natural gas industries — Hairpin-type heat exchangers
IEC 60300-3-1:2003 Dependability management - Part 3-1: Application guide - Analysis techniques for dependability - Guide on methodology
IEC 62040-3:2011 Uninterruptible power systems (UPS) - Part 3: Method of specifying the performance and test requirements
API 674 DATA SHEET : 2010 POSITIVE DISPLACEMENT PUMPS – RECIPROCATING – Mechanical Equipment Data Sheet – C6740D
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
API 660 : 2015 SHELL-AND-TUBE HEAT EXCHANGERS
IEC 61164:2004 Reliability growth - Statistical test and estimation methods
IEC 61703:2016 Mathematical expressions for reliability, availability, maintainability and maintenance support terms
IEC 60076-1:2011 Power transformers - Part 1: General
ISO 8528-9:2017 Reciprocating internal combustion engine driven alternating current generating sets — Part 9: Measurement and evaluation of mechanical vibrations
ISO 14310:2008 Petroleum and natural gas industries — Downhole equipment — Packers and bridge plugs
IEC 60300-1:2014 Dependability management - Part 1: Guidance for management and application
ISO 14001:2015 Environmental management systems — Requirements with guidance for use
OLF 070 : 2004
IEC 61709 : 3.0 ELECTRIC COMPONENTS - RELIABILITY - REFERENCE CONDITIONS FOR FAILURE RATES AND STRESS MODELS FOR CONVERSION
IEC 61511-2:2016 Functional safety - Safety instrumented systems for the process industry sector - Part 2: Guidelines for the application of IEC 61511-1:2016
IEC 60300-3-11:2009 Dependability management - Part 3-11: Application guide - Reliability centred maintenance
API 660 DATA SHEET : 2007 SHELL-AND-TUBE HEAT EXCHANGERS
API RP 17B : 2014 RECOMMENDED PRACTICE FOR FLEXIBLE PIPE
IEC 60034-1:2017 Rotating electrical machines - Part 1: Rating and performance
ISO 25457:2008 Petroleum, petrochemical and natural gas industries — Flare details for general refinery and petrochemical service
CSA C68.3 : 1997
IEC 60706-2:2006 Maintainability of equipment - Part 2: Maintainability requirements and studies during the design and development phase
API 661 DATA SHEET : 0 AIR-COOLED HEAT EXCHANGERS FOR GENERAL REFINERY SERVICE
NFPA 13 : 2016 INSTALLATION OF SPRINKLER SYSTEMS
ISO 13703:2000 Petroleum and natural gas industries Design and installation of piping systems on offshore production platforms
IEC 60300-2:2004 Dependability management - Part 2: Guidelines for dependability management
ISO 13628-4:2010 Petroleum and natural gas industries — Design and operation of subsea production systems — Part 4: Subsea wellhead and tree equipment
IEEE C37.012-2014 IEEE Guide for the Application of Capacitance Current Switching for AC High-Voltage Circuit Breakers Above 1000 V
API 526 : 2017 FLANGED STEEL PRESSURE-RELIEF VALVES
ISO 10423:2009 Petroleum and natural gas industries Drilling and production equipment Wellhead and christmas tree equipment
API 6D :2015 SPECIFICATION FOR PIPELINE AND PIPING VALVES
IEEE C37.20.7-2007 REDLINE IEEE Guide for Testing Metal-Enclosed Switchgear Rated Up to 38 kV for Internal Arcing Faults
IEC 62271-1:2017 High-voltage switchgear and controlgear - Part 1: Common specifications for alternating current switchgear and controlgear
API 612 : 2014 PETROLEUM, PETROCHEMICAL, AND NATURAL GAS INDUSTRIES - STEAM TURBINES - SPECIAL-PURPOSE APPLICATIONS
API 610 : 2010 CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES
IEC 62508:2010 Guidance on human aspects of dependability
ISO 8528-7:2017 Reciprocating internal combustion engine driven alternating current generating sets — Part 7: Technical declarations for specification and design
ISO 13709:2009 Centrifugal pumps for petroleum, petrochemical and natural gas industries
ISO 8528-1:2005 Reciprocating internal combustion engine driven alternating current generating sets Part 1: Application, ratings and performance
IEC 61000-4-7:2002+AMD1:2008 CSV Electromagnetic compatibility (EMC) - Part 4-7: Testing and measurement techniques - General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto
IEC 60300-3-10:2001 Dependability management - Part 3-10: Application guide - Maintainability
IEC 60034-12:2016 Rotating electrical machines - Part 12: Starting performance of single-speed three-phase cage induction motors
API STD 541 : 2014 FORM-WOUND SQUIRREL CAGE INDUCTION MOTORS - 375 KW (500 HORSEPOWER) AND LARGER
IEC 60076-2:2011 Power transformers - Part 2: Temperature rise for liquid-immersed transformers
API 537 DATA SHEET : 0 FLARE DETAILS FOR GENERAL REFINERY AND PETROCHEMICAL SERVICE
ISO 10432:2004 Petroleum and natural gas industries Downhole equipment Subsurface safety valve equipment
API 673 : 2014 CENTRIFUGAL FANS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
IEC 60706-5:2007 Maintainability of equipment - Part 5: Testability and diagnostic testing
ISO 13706:2011 Petroleum, petrochemical and natural gas industries — Air-cooled heat exchangers
ISO/TR 12489:2013 Petroleum, petrochemical and natural gas industries Reliability modelling and calculation of safety systems
IEC 61508-6:2010 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 6: Guidelines on the application of IEC 61508-2 and IEC 61508-3 (see Functional Safety and IEC 61508)
UL 2250:3ED 2017-03 Instrumentation Tray Cable
API 618 DATA SHEET : 0 RECIPROCATING COMPRESSORS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
IEC 60947-3:2008+AMD1:2012+AMD2:2015 CSV Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units
IEC 60050-444:2002 International Electrotechnical Vocabulary (IEV) - Part 444: Elementary relays
NORSOK I 001 : 2010 FIELD INSTRUMENTATION
IEC 61439-1:2011 Low-voltage switchgear and controlgear assemblies - Part 1: General rules
ISO 20815:2008 Petroleum, petrochemical and natural gas industries Production assurance and reliability management
IEC 60381-2:1978 Analogue signals for process control systems. Part 2: Direct voltage signals
ISO 10439-1:2015 Petroleum, petrochemical and natural gas industries Axial and centrifugal compressors and expander-compressors Part 1: General requirements
IEC 61508-1:2010 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements (see Functional Safety and IEC 61508)
IEC TR 61508-0:2005 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 0: Functional safety and IEC 61508 (see Functional Safety and IEC 61508)
API 650 : 2013 WELDED TANKS FOR OIL STORAGE
IEC 60947-2:2016 Low-voltage switchgear and controlgear - Part 2: Circuit-breakers
MIL-STD-1629 Revision A:1980 PROCEDURES FOR PERFORMING A FAILURE MODE, EFFECTS AND CRITICALITY ANALYSIS
API 594 : 2017 CHECK VALVES: FLANGED, LUG, WAFER, AND BUTT-WELDING
IEC 61650:1997 Reliability data analysis techniques - Procedures for comparison of two constant failure rates and two constant failure (event) intensities
API 616 DATA SHEET : 2011 GAS TURBINES FOR THE PETROLEUM CHEMICAL, AND GAS INDUSTRY SERVICES
NFPA 16 : 2015 INSTALLATION OF FOAM-WATER SPRINKLER AND FOAM-WATER SPRAY SYSTEMS
ISO 10439-4:2015 Petroleum, petrochemical and natural gas industries Axial and centrifugal compressors and expander-compressors Part 4: Expander-compressors
API 537 : 2017 FLARE DETAILS FOR PETROLEUM, PETROCHEMICAL, AND NATURAL GAS INDUSTRIES
IEEE C57.12.10-2010 REDLINE IEEE Standard Requirements for Liquid-Immersed Power Transformers
IEC 61508-7:2010 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 7: Overview of techniques and measures (see Functional Safety and IEC 61508)
ISO 13628-5:2009 Petroleum and natural gas industries Design and operation of subsea production systems Part 5: Subsea umbilicals
API 547 : 2017 GENERAL PURPOSE FORM-WOUND SQUIRREL CAGE INDUCTION MOTORS - 185 KW (250 HP) THROUGH 2240 KW (3000 HP)
ISO 13702:2015 Petroleum and natural gas industries — Control and mitigation of fires and explosions on offshore production installations — Requirements and guidelines
NORSOK N 001 : REV 8 INTEGRITY OF OFFSHORE STRUCTURES
ISO 14723:2009 Petroleum and natural gas industries — Pipeline transportation systems — Subsea pipeline valves
API 53 : 2012 BLOWOUT PREVENTION EQUIPMENT SYSTEMS FOR DRILLING WELLS
IEC 61508-2:2010 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 2: Requirements for electrical/electronic/programmable electronic safety-related systems (see Functional Safety and IEC 61508)
ISO 28300:2008 Petroleum, petrochemical and natural gas industries — Venting of atmospheric and low-pressure storage tanks
API 520-2 : 2015 SIZING, SELECTION, AND INSTALLATION OF PRESSURE-RELIEVING DEVICES - PART 2: INSTALLATION
API 17H : 2013 REMOTELY OPERATED TOOLS AND INTERFACES ON SUBSEA PRODUCTION SYSTEMS
API 19G2 : 2010 FLOW-CONTROL DEVICES FOR SIDE-POCKET MANDRELS
API 619 : 2010 ROTARY-TYPE POSITIVE DISPLACEMENT COMPRESSORS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES
NORSOK D 010 : 2013 WELL INTEGRITY IN DRILLING AND WELL OPERATIONS
API 662 DATA SHEET : 0 PLATE HEAT EXCHANGERS FOR GENERAL REFINERY SERVICES
IEEE C37.101-2006 REDLINE IEEE Guide for Generator Ground Protection
ISO 11960:2014 Petroleum and natural gas industries Steel pipes for use as casing or tubing for wells
IEC 61800-1:1997 Adjustable speed electrical power drive systems - Part 1: General requirments - Rating specifications for low voltage adjustables speed d.c. power drive systems
IEC 62271-102:2001+AMD1:2011+AMD2:2013 CSV High-voltage switchgear and controlgear - Part 102: Alternatingcurrent disconnectors and earthing switches
IEC 60300-3-5:2001 Dependability management - Part 3-5: Application guide - Reliability test conditions and statistical test principles
ISO 13623:2017 Petroleum and natural gas industries — Pipeline transportation systems
ISO 5208:2015 Industrial valves Pressure testing of metallic valves
API SPEC 12P : 2016 SPECIFICATION FOR FIBERGLASS REINFORCED PLASTIC TANKS

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.