ISO 6185-3:2014
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Inflatable boats — Part 3: Boats with a hull length less than 8 m with a motor rating of 15 kW and greater
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
04-03-2024
French, English
08-07-2014
ISO 6185-3:2014 specifies the minimum safety characteristics required for the design, materials to use, manufacture and testing of inflatable boats and rigid inflatable boats with a hull length in accordance with ISO 8666 less than 8 m with a motor power rating of 15 kW and greater.
ISO 6185:2014 is applicable to the following types of boats intended for use within the operating temperatures of -20 °C to +60 °C:
- Type VII: Powered Boats (with power ≥ 15 kW) fitted with a buoyancy tube attached to the port and starboard sides, suitable for navigation in conditions of Design Categories C and D and capable of installing motor power rating of 15 kW and greater.
- Type VIII: Powered Boats (with power > 75 kW) fitted with a buoyancy tube attached to the port and starboard sides, suitable for navigation in conditions of Design Category B capable of installing motor power rating of 75 kW and greater.
ISO 6185:2014 excludes single-chambered boats and boats made from unsupported materials, and is not applicable to aquatic toys and inflatable liferafts.
Committee |
ISO/TC 188
|
DevelopmentNote |
Together with ISO 6185-1, ISO 6185-2 and ISO 6185-4, supersedes ISO 6185. (07/2011) Supersedes ISO/FDIS 6185-3. (08/2014)
|
DocumentType |
Standard
|
Pages |
31
|
PublisherName |
International Organization for Standardization
|
Status |
Superseded
|
SupersededBy | |
Supersedes | |
UnderRevision |
Standards | Relationship |
IS 17952 : Part 3 : 2022 | Identical |
SN EN ISO 6185-3 : 2015 | Identical |
NF EN ISO 6185-3:2018 | Identical |
I.S. EN ISO 6185-3:2014 | Identical |
NEN EN ISO 6185-3 : 2014 | Identical |
UNE-EN ISO 6185-3:2019 | Identical |
BS EN ISO 6185-3:2014 | Identical |
ÖNORM EN ISO 6185-3 : 2019 | Identical |
PN EN ISO 6185-3 : 2014 | Identical |
I.S. EN ISO 6185-3:2018 | Identical |
EN ISO 6185-3:2014 | Identical |
NS EN ISO 6185-3 : 2014 | Identical |
EN ISO 6185-3:2018 | Identical |
NBN EN ISO 6185-3 : 2014 | Identical |
NF EN ISO 6185-3 : 2014 | Identical |
ONORM EN ISO 6185-3 : 2014 | Identical |
DIN EN ISO 6185-3:2014-12 | Identical |
UNE-EN ISO 6185-3:2015 | Identical |
UNI EN ISO 6185-3 : 2014 | Identical |
SN EN ISO 6185-3:2019 | Identical |
SANS 553-3 : 1ED 2008 | Identical |
BS EN ISO 6185-3:2018 | Identical |
DIN EN ISO 11592-1:2016-07 | SMALL CRAFT - DETERMINATION OF MAXIMUM PROPULSION POWER RATING USING MANOEUVRING SPEED - PART 1: CRAFT WITH A LENGTH OF HULL LESS THAN 8 M (ISO 11592-1:2016) |
DIN EN 15649-4:2012-03 | FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 4: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR CLASS B DEVICES |
15/30313602 DC : 0 | BS ISO 25649-7 - FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 7: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR CLASS E DEVICES |
BS EN ISO 25649-5:2017 | Floating leisure articles for use on and in the water Additional specific safety requirements and test methods for Class C devices |
I.S. EN ISO 11592:2001 | SMALL CRAFT LESS THAN 8 M LENGTH OF HULL - DETERMINATION OF MAXIMUM PROPULSION POWER RATING |
UNE-EN 15649-4:2010 | Floating leisure articles for use on and in the water - Part 4: Additional specific safety requirements and test methods for Class B devices |
UNI EN 15649-7 : 2010 | FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 7: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR CLASS E DEVICES |
UNE-EN 15649-7:2010 | Floating leisure articles for use on and in the water - Part 7: Additional specific safety requirements and test methods for class E devices |
EN ISO 25649-5:2017 | Floating leisure articles for use on and in the water - Part 5: Additional specific safety requirements and test methods for Class C devices (ISO 25649-5:2017) |
ISO 6185-4:2011 | Inflatable boats Part 4: Boats with a hull length of between 8 m and 24 m with a motor power rating of 15 kW and greater |
DIN EN ISO 6185-4:2011-10 | INFLATABLE BOATS - PART 4: BOATS WITH A HULL LENGTH OF BETWEEN 8 M AND 24 M WITH A MOTOR POWER RATING OF 15 KW AND GREATER |
UNI EN ISO 6185-4 : 2011 | INFLATABLE BOATS - PART 4: BOATS WITH A HULL LENGTH OF BETWEEN 8 M AND 24 M WITH A MOTOR POWER RATING OF 15 KW AND GREATER |
EN ISO 25649-3:2017 | Floating leisure articles for use on and in the water - Part 3: Additional specific safety requirements and test methods for Class A devices (ISO 25649-3:2017) |
EN ISO 25649-4:2017 | Floating leisure articles for use on and in the water - Part 4: Additional specific safety requirements and test methods for Class B devices (ISO 25649-4:2017) |
BS EN ISO 11592:2001 | Small craft less than 8 m length of hull. Determination of maximum propulsion power rating |
DIN EN ISO 11592:2002-04 | SMALL CRAFT LESS THAN 8 M LENGTH OF HULL - DETERMINATION OF MAXIMUM PROPULSION POWER RATING |
ISO 25649-3:2017 | Floating leisure articles for use on and in the water Part 3: Additional specific safety requirements and test methods for Class A devices |
UNE-EN ISO 11592-1:2016 | Small craft - Determination of maximum propulsion power rating using manoeuvring speed - Part 1: Craft with a length of hull less than 8 m (ISO 11592-1:2016) |
BS EN ISO 25649-6:2017 | Floating leisure articles for use on and in the water Additional specific safety requirements and test methods for Class D devices |
NF EN ISO 6185-4 : 2011 | INFLATABLE BOATS - PART 4: BOATS WITH AN HULL LENGTH OF BETWEEN 8 M AND 24 M WITH A MOTOR POWER RATING OF 15 KW AND GREATER |
BS EN ISO 25649-1:2017 | Floating leisure articles for use on and in the water Classification, materials, general requirements and test methods |
DIN EN 15649-3:2012-03 | FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 3: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR CLASS A DEVICES |
EN ISO 25649-6:2017 | Floating leisure articles for use on and in the water - Part 6: Additional specific safety requirements and test methods for Class D devices (ISO 25649-6:2017) |
15/30313590 DC : 0 | BS ISO 25649-3 - FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 3: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR CLASS A DEVICES |
UNE-EN 15649-3:2010 | Floating leisure articles for use on and in the water - Part 3: Additional specific safety requirements and test methods for Class A devices |
BS EN 15649-5:2009 | Floating leisure articles for use on and in the water Additional specific safety requirements and test methods for Class C devices |
97/719524 DC : DRAFT NOV 1997 | ISO/CD 12217-1.2 - SMALL CRAFT - STABILITY AND BUOYANCY - METHODS OF ASSESSMENT AND CATEGORIZATION - PART 1: NON-SAILING BOATS OVER 6 M LENGTH OF HULL |
I.S. EN ISO 25649-3:2017 | FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 3: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR CLASS A DEVICES (ISO 25649-3:2017) |
I.S. EN ISO 6185-4:2011 | INFLATABLE BOATS - PART 4: BOATS WITH A HULL LENGTH OF BETWEEN 8 M AND 24 M WITH A MOTOR POWER RATING OF 15 KW AND GREATER (ISO 6185-4:2011, CORRECTED VERSION 2014-08-01) |
ISO 25649-7:2017 | Floating leisure articles for use on and in the water Part 7: Additional specific safety requirements and test methods for Class E devices |
ISO 25649-4:2017 | Floating leisure articles for use on and in the water Part 4: Additional specific safety requirements and test methods for Class B devices |
BS EN ISO 6185-4:2011 | Inflatable boats Boats with a hull length of between 8 m and 24 m with a motor power rating of 15 kW and greater |
UNE-EN 15649-6:2010 | Floating leisure articles for use on and in the water - Part 6: Additional specific safety requirements and test methods for Class D devices |
DIN EN 15649-7:2010-04 | FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 7: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR CLASS E DEVICES |
DIN EN ISO 11592-1 E : 2016 | SMALL CRAFT - DETERMINATION OF MAXIMUM PROPULSION POWER RATING USING MANOEUVRING SPEED - PART 1: CRAFT WITH A LENGTH OF HULL LESS THAN 8 M (ISO 11592-1:2016) |
DIN EN 15649-6:2014-06 | FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 6: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR CLASS D DEVICES |
I.S. EN ISO 25649-1:2017 | FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS (ISO 25649-1:2017) |
I.S. EN 15649-3:2009 | FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 3: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR CLASS A DEVICES |
15/30313596 DC : 0 | BS ISO 25649-5 - FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 5: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR CLASS C DEVICES |
15/30313584 DC : 0 | BS ISO 25649-1 - FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS |
BS EN 15649-6 : 2009 | FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 6: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR CLASS D DEVICES |
15/30313593 DC : 0 | BS ISO 25649-4 - FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 4: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR CLASS B DEVICES |
BS EN 15649-1 : 2009 | FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS |
15/30313599 DC : 0 | BS ISO 25649-6 - FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 6: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR CLASS D DEVICES |
UNE-EN 15649-1:2010 | Floating leisure articles for use on and in the water - Part 1: Classification, materials, general requirements and test methods |
ISO 25649-5:2017 | Floating leisure articles for use on and in the water Part 5: Additional specific safety requirements and test methods for Class C devices |
I.S. EN ISO 25649-7:2017 | FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 7: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR CLASS E DEVICES (ISO 25469-7:2017) |
I.S. EN 15649-5:2009 | FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 5: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR CLASS C DEVICES |
EN ISO 11592:2001 | Small craft less than 8 m length of hull - Determination of maximum propulsion power rating (ISO 11592:2001) |
UNI EN 15649-5 : 2010 | FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 5: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR CLASS C DEVICES |
ISO 11592-1:2016 | Small craft Determination of maximum propulsion power rating using manoeuvring speed Part 1: Craft with a length of hull less than 8 m |
ISO 25649-6:2017 | Floating leisure articles for use on and in the water Part 6: Additional specific safety requirements and test methods for Class D devices |
DIN EN 15649-1:2014-06 | FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS |
BS EN 15649-7:2009 | Floating leisure articles for use on and in the water Additional specific safety requirements and test methods for Class E devices |
I.S. EN ISO 11592-1:2016 | SMALL CRAFT - DETERMINATION OF MAXIMUM PROPULSION POWER RATING USING MANOEUVRING SPEED - PART 1: CRAFT WITH A LENGTH OF HULL LESS THAN 8 M (ISO 11592-1:2016) |
07/30161901 DC : 0 | BS EN 15649-3 - FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 3: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR CLASS A DEVICES |
BS EN 15649-4 : 2010 | FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 4: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR CLASS B DEVICES |
BS EN ISO 11592-1:2016 | Small craft. Determination of maximum propulsion power rating using manoeuvring speed Craft with a length of hull less than 8 m |
BS EN 15649-3 : 2009 | FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 3: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR CLASS A DEVICES |
07/30161910 DC : 0 | BS EN 15649-7 - FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 7: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR CLASS E DEVICES |
UNI EN 15649-4 : 2012 | FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 4: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR CLASS B DEVICES |
DIN EN 15649-5:2010-04 | FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 5: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR CLASS C DEVICES |
EN ISO 14946:2001/AC:2005 | SMALL CRAFT - MAXIMUM LOAD CAPACITY |
BS EN ISO 25649-3:2017 | Floating leisure articles for use on and in the water Additional specific safety requirements and test methods for Class A devices |
UNI EN 15649-1 : 2014 | FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS |
I.S. EN ISO 14946:2002 | SMALL CRAFT - MAXIMUM LOAD CAPACITY |
UNE-EN ISO 25649-4:2018 | Floating leisure articles for use on and in the water - Part 4: Additional specific safety requirements and test methods for Class B devices (ISO 25649-4:2017) |
I.S. EN ISO 25649-4:2017 | FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 4: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR CLASS B DEVICES (ISO 25649-4:2017) |
I.S. EN ISO 25649-6:2017 | FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 6: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR CLASS D DEVICES (ISO 25649-6:2017) |
I.S. EN ISO 25649-5:2017 | FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 5: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR CLASS C DEVICES (ISO 25649-5:2017) |
I.S. EN 15649-6:2009 | FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 6: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR CLASS D DEVICES |
I.S. EN ISO 10240:2004 | SMALL CRAFT - OWNER'S MANUAL (ISO 10240:2004) |
ISO 14946:2001 | Small craft Maximum load capacity |
ISO 11592:2001 | Small craft less than 8 m length of hull Determination of maximum propulsion power rating |
EN 15649-4:2010+A1:2012 | Floating leisure articles for use on and in the water - Part 4: Additional specific safety requirements and test methods for Class B devices |
EN 15649-5:2009 | Floating leisure articles for use on and in the water - Part 5: Additional specific safety requirements and test methods for Class C devices |
EN 15649-1:2009+A2:2013 | Floating leisure articles for use on and in the water - Part 1: Classification, materials, general requirements and test methods |
EN 15649-3:2009+A1:2012 | Floating leisure articles for use on and in the water - Part 3: Additional specific safety requirements and test methods for Class A devices |
EN 15649-7:2009 | Floating leisure articles for use on and in the water - Part 7: Additional specific safety requirements and test methods for class E devices |
EN 15649-6:2009+A1:2013 | FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 6: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR CLASS D DEVICES |
EN ISO 11592-1:2016 | Small craft - Determination of maximum propulsion power rating using manoeuvring speed - Part 1: Craft with a length of hull less than 8 m (ISO 11592-1:2016) |
UNE-EN 15649-5:2010 | Floating leisure articles for use on and in the water - Part 5: Additional specific safety requirements and test methods for Class C devices |
UNI EN 15649-6 : 2014 | FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 6: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR CLASS D DEVICES |
UNE-EN ISO 6185-4:2012 | Inflatable boats - Part 4: Boats with a hull length of between 8 m and 24 m with a motor power rating of 15 kW and greater (ISO 6185-4:2011, Corrected version 2014-08-01) |
I.S. EN 15649-4:2010 | FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 4: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR CLASS B DEVICES |
BS EN ISO 25649-4:2017 | Floating leisure articles for use on and in the water Additional specific safety requirements and test methods for Class B devices |
07/30161895 DC : 0 | BS EN 15649-1 - FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS |
BS EN ISO 25649-7:2017 | Floating leisure articles for use on and in the water Additional specific safety requirements and test methods for Class E devices |
UNI EN 15649-3 : 2012 | FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 3: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR CLASS A DEVICES |
I.S. EN 15649-7:2009 | FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 7: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR CLASS E DEVICES |
I.S. EN 15649-1:2009 | FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS |
EN ISO 25649-7:2017 | Floating leisure articles for use on and in the water - Part 7: Additional specific safety requirements and test methods for class E devices (ISO 25649-7:2017) |
EN ISO 6185-4:2011 | Inflatable boats - Part 4: Boats with a hull length of between 8 m and 24 m with a motor power rating of 15 kW and greater (ISO 6185-4:2011, Corrected version 2014-08-01) |
EN ISO 25649-1:2017 | Floating leisure articles for use on and in the water - Part 1: Classification, materials, general requirements and test methods (ISO 25649-1:2017) |
BS EN ISO 14946:2001 | Small craft. Maximum load capacity |
ISO 10239:2014 | Small craft Liquefied petroleum gas (LPG) systems |
ISO 15083:2003 | Small craft - Bilge-pumping systems |
2003/44/EC : 2003 COR 1 2006 | DIRECTIVE 2003/44/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 16 JUNE 2003 AMENDING DIRECTIVE 94/25/EC ON THE APPROXIMATION OF THE LAWS, REGULATIONS AND ADMINISTRATIVE PROVISIONS OF THE MEMBER STATES RELATING TO RECREATIONAL CRAFT |
ISO 12215-5:2008 | Small craft Hull construction and scantlings Part 5: Design pressures for monohulls, design stresses, scantlings determination |
ISO 2896:2001 | Rigid cellular plastics Determination of water absorption |
ISO 11192:2005 | Small craft Graphical symbols |
ISO 7010:2011 | Graphical symbols Safety colours and safety signs Registered safety signs |
ISO 14946:2001 | Small craft Maximum load capacity |
ISO 4675:2017 | Rubber- or plastics-coated fabrics — Low-temperature bend test |
ISO 12217-3:2015 | Small craft — Stability and buoyancy assessment and categorization — Part 3: Boats of hull length less than 6 m |
ISO 10088:2013 | Small craft — Permanently installed fuel systems |
ISO 11547:1994 | Small craft — Start-in-gear protection |
ISO 6185-4:2011 | Inflatable boats Part 4: Boats with a hull length of between 8 m and 24 m with a motor power rating of 15 kW and greater |
ISO 2411:2017 | Rubber- or plastics-coated fabrics — Determination of coating adhesion |
ISO 11105:1997 | Small craft Ventilation of petrol engine and/or petrol tank compartments |
ISO 11592:2001 | Small craft less than 8 m length of hull Determination of maximum propulsion power rating |
ISO 8666:2016 | Small craft Principal data |
ISO 8847:2004 | Small craft Steering gear Cable and pulley systems |
ISO 15084:2003 | Small craft Anchoring, mooring and towing Strong points |
ISO 9775:1990 | Small craft Remote steering systems for single outboard motors of 15 kW to 40 kW power |
ISO 10133:2012 | Small craft Electrical systems Extra-low-voltage d.c. installations |
ISO 8469:2013 | Small craft Non-fire-resistant fuel hoses |
ISO 12217-1:2015 | Small craft — Stability and buoyancy assessment and categorization — Part 1: Non-sailing boats of hull length greater than or equal to 6 m |
ISO 12215-3:2002 | Small craft — Hull construction and scantlings — Part 3: Materials: Steel, aluminium alloys, wood, other materials |
ISO 8846:1990 | Small craft — Electrical devices — Protection against ignition of surrounding flammable gases |
ISO 8849:2003 | Small craft Electrically operated direct-current bilge pumps |
ISO 8848:1990 | Small craft Remote steering systems |
ISO 16180:2013 | Small craft — Navigation lights — Installation, placement and visibility |
ISO 10592:1994 | Small craft Hydraulic steering systems |
ISO 15652:2003 | Small craft Remote steering systems for inboard mini jet boats |
ISO 11812:2001 | Small craft Watertight cockpits and quick-draining cockpits |
ISO 12215-1:2000 | Small craft — Hull construction and scantlings — Part 1: Materials: Thermosetting resins, glass-fibre reinforcement, reference laminate |
ISO 10240:2004 | Small craft Owner's manual |
ISO 21487:2012 | Small craft — Permanently installed petrol and diesel fuel tanks |
ISO 3864-1:2011 | Graphical symbols Safety colours and safety signs Part 1: Design principles for safety signs and safety markings |
ISO 13297:2014 | Small craft Electrical systems Alternating current installations |
ISO 15085:2003 | Small craft Man-overboard prevention and recovery |
EN 314-2:1993 | Plywood - Bonding quality - Part 2: Requirements |
ISO 16147:2002 | Small craft Inboard diesel engines Engine-mounted fuel and electrical components |
ISO 15584:2001 | Small craft Inboard petrol engines Engine-mounted fuel and electrical components |
ISO 8665:2006 | Small craft Marine propulsion reciprocating internal combustion engines Power measurements and declarations |
ISO 12216:2002 | Small craft Windows, portlights, hatches, deadlights and doors Strength and watertightness requirements |
ISO 3011:1997 | Rubber- or plastics-coated fabrics Determination of resistance to ozone cracking under static conditions |
ISO 4674-1:2016 | Rubber- or plastics-coated fabrics Determination of tear resistance Part 1: Constant rate of tear methods |
ISO 10087:2006 | Small craft Craft identification Coding system |
ISO 12215-6:2008 | Small craft — Hull construction and scantlings — Part 6: Structural arrangements and details |
ISO 1817:2015 | Rubber, vulcanized or thermoplastic Determination of the effect of liquids |
ISO 14945:2004 | Small craft Builder's plate |
ISO 8099:2000 | Small craft Toilet waste retention systems |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.