SAE AMS 2371 : 2016
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
QUALITY ASSURANCE SAMPLING AND TESTING, CORROSION AND HEAT-RESISTANT STEELS AND ALLOYS, WROUGHT PRODUCTS AND FORGING STOCK
Available format(s)
Hardcopy , PDF
Superseded date
12-20-2019
Language(s)
English
Published date
01-01-2016
Publisher
1 SCOPE
2 APPLICABLE DOCUMENTS
3 TECHNICAL REQUIREMENTS
4 QUALITY ASSURANCE PROVISIONS
5 PREPARATION FOR DELIVERY
6 ACKNOWLEDGEMENT
7 REJECTIONS
8 NOTES
Specifies quality assurance sampling and testing procedures used to determine conformance to applicable material specification requirements of wrought corrosion and heat-resistant steel and alloy products and of forging stock.
| Committee |
AMS-F
|
| DocumentType |
Standard
|
| Pages |
10
|
| PublisherName |
SAE International
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| MIL-Q-22631 Revision B:1964 | Similar to |
| SAE AMS 5524 : 2014 | STEEL, CORROSION AND HEAT-RESISTANT, SHEET, STRIP AND PLATE 18CR - 13NI - 2.5MO (SAE 30316) SOLUTION HEAT TREATED |
| SAE AMS 5697 : 2018 | STEEL, CORROSION-RESISTANT, WIRE, 19CR - 9.5NI (304), SOLUTION HEAT TREATED |
| SAE AMS 5895 : 2015 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, CONSUMABLE ELECTRODE MELTED, 1750 DEGREES F (954 DEGREES C) SOLUTION HEAT TREATED, WELDING GRADE, PRECIPITATION HARDENABLE |
| SAE AMS 5900 : 2000 | STEEL BARS, FORGINGS, AND TUBING, CORROSION RESISTANT, 14CR - 2.1MO - 0.30CB - 1.0V (1.05 - 1.15C), PREMIUM AIRCRAFT QUALITY FOR BEARING APPLICATIONS, DOUBLE VACUUM MELTED |
| SAE AMS 5960 : 2013 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT SHEET, STRIP, AND FOIL, NI - 18CR - 2.8MO - 5.5CB(NB) - 0.70TI - 1.50AL - 10FE - 9CO - 1W, VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED, SOLUTION HEAT TREATED |
| SAE AMS 5866 : 2016 | STEEL, CORROSION-RESISTANT, FLAT WIRE, 18CR - 9.0NI (302), SPRING TEMPER |
| SAE AMS 5843 : 2016 | COBALT-NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS 19CR - 36CO - 25NI - 7.0MO - 0.50CB (NB) - 2.9TI - 0.20AL - 9.0FE VACUUM INDUCTION PLUS VACUUM CONSUMABLE ELECTRODE MELTED SOLUTION HEAT TREATED, WORK STRENGTHENED, AND AGED |
| SAE AMS 5546 : 1990(S2017) | STEEL SHEET AND STRIP, CORROSION AND MODERATE HEAT RESISTANT 16.5CR - 4.5NI - 2.9MO - 0.10N COLD ROLLED, TEMPERED |
| SAE AMS 5711 : 2015 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 65NI - 15.8CR - 15.2MO - 0.30AL - 0.05LA, SOLUTION HEAT TREATED |
| SAE MAM 5598 : 2000 | NICKEL ALLOY, CORROSION AND HEAT RESISTANT, SHEET, STRIP, AND PLATE 72NI - 15.5CR - 0.95(CB + TA) - 2.5TI - 0.70AL - 7.0FE CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
| SAE AMS 5553 : 2018 | NICKEL, SHEET AND STRIP, LOW (0.02 MAX) CARBON, ANNEALED |
| SAE AMS 5889 : 2015 | NICKEL ALLOY, CORROSION AND HEAT RESISTANT, SHEET AND STRIP, 54NI - 22CR - 12.5CO - 9.0MO - 1.2AL, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED, ANNEALED |
| SAE MAM 5914 : 2003 | NICKEL ALLOY, CORROSION AND HEAT RESISTANT, SHEET, STRIP, AND FOIL 52.5NI - 19CR - 3.0MO - 5.0CB - 0.90TI - 0.50AL - 18FE CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED PRECISION COLD ROLLED, SOLUTION HEAT TREATED |
| SAE AMS 5935 : 2016 | STEEL, CORROSION-RESISTANT, BARS, WIRE, AND FORGINGS, 12CR - 10NI - 2MO - 0.9AL - 0.3TI, VACUUM INDUCTION PLUS VACUUM CONSUMABLE ELECTRODE MELTED SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
| SAE AMS 5575 : 2013 | STEEL, CORROSION AND HEAT-RESISTANT, WELDED TUBING, 18CR - 10.5NI - 0.70CB (NB) (347), SOLUTION HEAT TREATED |
| SAE AMS 5573 : 2012 | STEEL, CORROSION AND HEAT-RESISTANT, SEAMLESS TUBING, 17CR - 12NI - 2.5MO (SAE 30316), SOLUTION HEAT TREATED |
| SAE AMS 5587 : 2016 | NICKEL ALLOY, CORROSION AND HEAT RESISTANT, SEAMLESS TUBING, 47.5NI - 22CR - 1.5CO - 9.0MO - 0.60W - 18.5FE, SOLUTION HEAT TREATED |
| SAE AMS 5902 : 2008 | STEEL, CORROSION-RESISTANT, SHEET AND STRIP, 18CR - 8NI (SAE 30301), COLD ROLLED, 3/4 HARD, 175 KSI (1207 MPA) TENSILE STRENGTH |
| SAE AMS 5663 : 2016 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS 52.5NI - 19CR - 3.0MO - 5.1CB (NB) - 0.90TI - 0.50AL - 18FE CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED 1775 DEGREES F (968 DEGREES C) SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 5625 : 2018 | STEEL BARS, HIGH EXPANSION, 9.5NI - 5.5MN (0.55 - 0.65C), COLD FINISHED |
| SAE AMS 5223 : 2012 | IRON-NICKEL ALLOY, STRIP, 49Fe 5.3Cr 42Ni 2.5Ti 0.55Al, SOLUTION HEAT TREATED, COLD ROLLED, 10% REDUCTION |
| SAE AMS 5704 : 2015 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, FORGINGS 57NI - 19.5CR - 13.5CO - 4.3MO - 3.0TI - 1.4AL - 0.05ZR - 0.006B CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED 1825 TO 1900 DEGREES F (996 TO 1038 DEGREES C) SOLUTION, STABILIZATION, AND PRECIPITATION HEAT TREATED |
| MIL-DTL-16356 Revision E:2013 | GAUGES, DIRECT READING, OBLONG GLASS |
| SAE AMS 5709 : 2013 | NICKEL ALLOY, CORROSION AND HEAT RESISTANT, BARS AND FORGINGS, 58NI - 19.5CR - 13.5CO - 4.3MO - 3.0TI - 1.4AL - 0.05ZR - 0.006B, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED, 1975 DEGREE F (1079 DEGREE C) SOLUTION, STABILIZATION, AND PRECIPITATION HEAT TREATED |
| SAE AMS 4544 H: 2017 | NICKEL-COPPER ALLOY, CORROSION RESISTANT, SHEET, STRIP, AND PLATE 67NI - 30CU, ANNEALED |
| SAE AMS 7724 : 1987 (S2017) | ALLOY SHEET AND STRIP, SINTERED WIRE MESH, CORROSION AND HEAT RESISTANT, 30FE - 1.5MN - 21CR - 20NI - 20CO - 3.0MO - 2.5W - 1.0(CB + TA) - 0.15N, POROUS |
| SAE AMS 5622 : 2013 | STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 16CR - 4.0NI - 0.30CB - 4.0CU, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE, CONSUMABLE ELECTRODE REMELTED |
| SAE AMS 5826 : 2017 | STEEL, CORROSION AND HEAT-RESISTANT, WELDING WIRE 15CR - 5.1NI - 0.30CB(NB) - 3.2CU |
| SAE AMS5624F:1989(S2017) | Steel Bars, High Expansion 4.5Mn - 4.0Cr - 12.5Ni (0.50 - 0.60C) Cold Finished(STABILIZED Apr 2017) |
| SAE AS 1371 : 2015 | NUTS, SELF-LOCKING, CORROSION RESISTANT STEEL, HIGH STRENGTH, PREVAILING TORQUE, ALL METAL, 800 DEGREES F (427 DEGREES C) USE, UNJ THREAD FORM |
| SAE AMS 5649 : 2012 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, AND FORGINGS, 18CR - 13NI - 2.1MO, FREE MACHINING, SOLUTION HEAT TREATED |
| SAE AMS 5655 : 2016 | STEEL, CORROSION AND HEAT RESISTANT, BARS, WIRE, AND FORGINGS 12.5CR - 0.75NI - 1.0MO - 1.0W - 0.24V (0.20-0.25C) HARDENED AND TEMPERED |
| SAE AMS 5703 : 2018 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 41.5NI - 16CR - 37FE - 2.9CB - 1.8TI, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED, 1750 DEGREES F (954 DEGREES C) SOLUTION, STABILIZATION, AND PRECIPITATION HEAT TREATED |
| SAE AMS 5503 : 2015 | STEEL, CORROSION-RESISTANT, SHEET, STRIP, AND PLATE, 17CR (SAE 51430) ANNEALED |
| SAE AMS 5764 : 2014 | STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, EXTRUSIONS, AND RINGS 5.0MN - 22CR - 12.5NI - 2.2MO - 0.20CB - 0.30N - 0.20V SOLUTION HEAT TREATED |
| SAE AMS 5674 : 2012 | STEEL, CORROSION AND HEAT RESISTANT, WIRE 18CR - 11.5NI - 0.70 CB (SAE 30347) SOLUTION HEAT TREATED |
| SAE AMS 5834 : 2014 | COBALT ALLOY, CORROSION AND HEAT-RESISTANT, ROUND WIRE 20CR - 15NI - 40CO - 7.0MO - 16FE VACUUM INDUCTION PLUS CONSUMABLE ELECTRODE MELTED SOLUTION HEAT TREATED, COLD DRAWN, AND AGED |
| SAE AMS 5961 : 2012 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, WIRE, 74NI - 15.5CR - 8.0FE, COLD REDUCED, SPRING TEMPER |
| SAE AMS5530H:1988(S2017) | ALLOY SHEET, STRIP, AND PLATE, CORROSION AND HEAT RESISTANT, 58NI - 15.5CR - 16MO - 3.8W - 5.5FE, SOLUTION HEAT TREATED |
| SAE AMS 5646 : 2014 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 18CR - 11NI - 0.60CB(NB) (347), SOLUTION HEAT TREATED |
| SAE AMS 5842 : 2016 | COBALT-NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS 19CR - 36CO - 25NI - 7.0MO - 0.50CB (NB) - 2.9TI - 0.20AL - 9.0FE VACUUM INDUCTION PLUS VACUUM CONSUMABLE ELECTRODE MELTED SOLUTION HEAT TREATED AND WORK STRENGTHENED |
| SAE AMS 5665 : 2012 | NICKEL ALLOY, CORROSION AND HEAT RESISTANT, BARS, FORGINGS, AND RINGS, 74NI - 15.5CR - 8.0FE |
| SAE AMS 5507 : 2012 | STEEL, CORROSION AND HEAT-RESISTANT, SHEET, STRIP, AND PLATE, 17CR - 13NI - 2.5MO (316L), SOLUTION HEAT TREATED |
| SAE AMS 5903 : 2006 | STEEL, CORROSION-RESISTANT, SHEET, STRIP, AND PLATE, 18CR - 9.0NI (SAE 30302), COLD ROLLED, 1/4 HARD, 125 KSI (862 MPA) TENSILE STRENGTH |
| SAE AMS 5618 : 2017 | STEEL, CORROSION-RESISTANT, BARS, WIRE, AND FORGINGS, 17CR - 0.52MO (0.95 - 1.20C) (440C), CONSUMABLE ELECTRODE VACUUM MELTED |
| SAE AMS 5638 : 2015 | STEEL, CORROSION-RESISTANT, BARS AND FORGINGS, 0.14S - 18CR - 9.5NI - 0.50MO - 0.80AL (303MA), FREE-MACHINING; SWAGING OR UPSETTING, SOLUTION HEAT TREATED |
| SAE AMS 5571J:2012(R2018) | STEEL, CORROSION AND HEAT-RESISTANT, SEAMLESS TUBING, 18CR - 10.5NI - 0.70CB (NB) (347), SOLUTION HEAT TREATED |
| SAE AMS 5862M:2017 | STEEL, CORROSION-RESISTANT, SHEET, STRIP, AND PLATE, 15CR - 4.5NI - 0.30CB (NB) - 3.5CU, CONSUMABLE ELECTRODE REMELTED, SOLUTION HEAT TREATED, PRECIPITATION-HARDENABLE |
| SAE AMS 5550F :1988(S2017) | ALLOY SHEET, STRIP, AND PLATE, CORROSION AND HEAT RESISTANT, 80NI - 15.5CR - 0.62TI - 3.25AL, ANNEALED |
| SAE AMS 5734 : 2012 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, AND TUBING, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, CONSUMABLE ELECTRODE MELTED, 1650 DEGREES F (899 DEGREES C) SOLUTION HEAT TREATED |
| SAE AMS 5916 : 2017 | ALLOY, CORROSION AND HEAT-RESISTANT, SHEET, STRIP, AND PLATE, 35FE - 24CR - 37NI - 0.65CB(NB) - 0.2N, ANNEALED |
| SAE AMS 5557 : 2012 | STEEL, CORROSION AND HEAT RESISTANT, SEAMLESS OR WELDED HYDRAULIC TUBING, 18.5CR - 10.5NI - 0.40TI (SAE 30321), SOLUTION HEAT TREATED |
| SAE AMS 5888C : 2009(R2015) | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, PLATE, 54NI - 22CR - 12.5CO - 9.0MO - 1.2AL, ANNEALED |
| SAE AMS 5631 : 2018 | STEEL, CORROSION-RESISTANT, BARS AND FORGINGS, 17CR (0.60 - 0.75C) (440A) |
| SAE AMS 5715 : 2014 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 60.5NI - 23CR - 14FE - 1.4AL, ANNEALED |
| SAE AMS 5628 : 2015 | STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, AND TUBING, 16CR - 2.5NI (SAE 51431) |
| SAE AMS 5589 : 2013 | NICKEL ALLOY, CORROSION AND HEAT RESISTANT, SEAMLESS TUBING 52.5NI - 19CR - 3.0MO - 5.1CB - 0.90TI - 0.50AL - 18FE CONSUMABLE ELECTRODE REMELTED OR VACUUM INDUCTION MELTED, 1775 DEGREES F (968 DEGREES C), SOLUTION HEAT TREATED |
| SAE AMS 5878 : 2015 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, SHEET, STRIP, AND PLATE, 59NI - 22CR - 2MO - 14W - 0.35AI - 0.03LA, SOLUTION HEAT TREATED |
| SAE AMS 5910 : 2012 | STEEL, CORROSION-RESISTANT, SHEET, STRIP, AND PLATE, 19CR - 9.2NI (SAE 30304) COLD ROLLED, 125 KSI (862 MPA) TENSILE STRENGTH |
| SAE AMS 5872 : 2012 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, SHEET, STRIP, AND PLATE, 48NI - 20CR - 20CO - 5.9MO - 2.2TI - 0.45AL, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED, SOLUTION HEAT TREATED |
| SAE AMS 5719 : 2012 | STEEL BARS, WIRE, FORGINGS, TUBING, RINGS, AND EXTRUSIONS, CORROSION-RESISTANT, 11.8CR - 2.5NI - 1.8MO - 0.33V (0.08 - 0.15C), ANNEALED, VACUUM ARC OR ELECTROSLAG REMELTED |
| SAE AMS 5643 : 2018 | STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 16CR - 4.0NI - 0.30CB (NB) - 4.0CU, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
| SAE AMS 5577 : 2013 | STEEL, CORROSION AND HEAT RESISTANT, WELDED TUBING, 25CR - 20NI (SAE 30310), SOLUTION HEAT TREATED |
| DOT/FAA/AR-MMPDS-01 : 20030131 | METALLIC MATERIALS PROPERTIES DEVELOPMENT AND STANDARDIZATION (MMPDS) |
| SAE AMS 5899 : 2013 | STEEL, CORROSION-RESISTANT, BARS, WIRE, AND FORGINGS, 17CR - 0.52MO (0.95 - 1.20C), POWDER METALLURGY PRODUCT, HOT ISOSTATICALLY PRESSED |
| SAE AMS 5614 : 2013 | STEEL, CORROSION AND HEAT RESISTANT, BARS, WIRE, AND FORGINGS 12CR - 0.50MO, ANNEALED |
| SAE AMS 5667 : 2015 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS 72NI - 15.5CR - 0.95CB - 2.5TI - 0.70AL - 7.0FE EQUALIZED, PRECIPITATION HARDENABLE |
| SAE AMS 5221 E: 2012 | IRON-NICKEL ALLOY STRIP 49FE - 5.3CR - 42NI - 2.5TI - 0.55AL SOLUTION HEAT TREATED |
| SAE AMS 5578 : 2014 | STEEL, CORROSION AND HEAT-RESISTANT, WELDED TUBING, 12CR - 8.5NI - 0.30CB - 1.1TI - 2.0CU, VACUUM INDUCTION PLUS CONSUMABLE ELECTRODE VACUUM MELTED, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
| SAE AMS 5914 : 2012 | NICKEL ALLOY, CORROSION AND HEAT RESISTANT, SHEET, STRIP, AND FOIL 52.5NI - 19CR - 3.0MO - 5.0CB - 0.90TI - 0.50AL - 18FE, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED PRECISION COLD ROLLED, SOLUTION HEAT TREATED |
| SAE AMS7717E:2015(R2019) | NICKEL-IRON ALLOY, MAGNETIC, SHEET AND STRIP, 50NI - 50FE, ANNEALED, FORMING GRADE |
| SAE AMS 5576 : 2010 | STEEL, CORROSION AND HEAT RESISTANT, WELDED TUBING - 18CR - 10.5NI - 0.40TI (SAE 30321) SOLUTION HEAT TREATED |
| SAE AMS 5780 : 2018 | STEEL, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 15.5CR - 4.5NI - 2.9MO - 0.10N |
| SAE AMS 5874 : 2012 | ALLOY, CORROSION AND HEAT-RESISTANT, SHEET, STRIP, AND PLATE, 29FE - 22CR - 21NI - 18.5CO - 3.2MO - 2.8W - 0.78TA - 0.30AL - 0.05ZR - 0.05LA - 0.20N SOLUTION HEAT TREATED |
| SAE AMS 5621 : 2015 | STEEL, CORROSION RESISTANT, BARS, WIRE, AND FORGINGS, 13CR (0.30-0.40C) (51420), ANNEALED |
| SAE AMS 5636 : 2006 | STEEL, CORROSION-RESISTANT, BARS AND WIRE, 18CR - 9.0NI (SAE 30302), SOLUTION HEAT TREATED AND COLD DRAWN, 100 KSI (689 MPA) TENSILE STRENGTH |
| SAE MAM 5599 : 2003 | NICKEL ALLOY, CORROSION AND HEAT RESISTANT, SHEET, STRIP, AND PLATE 62NI - 21.5CR - 9.0MO - 3.7 (CB+TA) ANNEALED |
| SAE AMS 5782 : 2013 | STEEL, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 20.5CR - 9.0NI - 0.50MO - 1.5W - 1.2CB - 0.20TI, VACUUM INDUCTION MELTED |
| SAE AMS 5879 : 2015 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, SHEET, STRIP, AND FOIL, 62NI - 21.5CR - 9.0MO - 3.7CB (NB), COLD ROLLED AND ANNEALED |
| SAE AMS 5907 : 2012 | STEEL, CORROSION AND HEAT-RESISTANT, SHEET, STRIP, AND PLATE, 17CR - 12NI - 2.5MO (SAE 30316), COLD ROLLED, 1/4 HARD, 125 KSI (862 MPA) TENSILE STRENGTH |
| SAE AMS 5442 : 2017 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, NI - 18CR - 2.8MO - 5.5CB(NB) - 0.70TI - 1.50AL - 10FE - 9CO - 1W, CONSUMABLE ELECTRODE REMELTED OR VACUUM INDUCTION MELTED, 1775 DEGREES F (968 DEGREES C) SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 5824F : 2017 | STEEL, CORROSION-RESISTANT, WELDING WIRE 17CR - 7.1NI - 1.0AL |
| SAE AMS 5642 : 2013 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, AND FORGINGS, 18CR - 10.5NI - 0.60CB, FREE-MACHINING, SOLUTION HEAT TREATED |
| SAE AMS 5966 : 2013 | NICKEL ALLOY, CORROSION AND HEAT RESISTANT, WELDING WIRE, 50NI - 20CR - 20CO - 5.9MO - 2.2TI - 0.45AI, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED |
| SAE AMS 5515 : 2013 | STEEL, CORROSION RESISTANT, SHEET, STRIP, AND PLATE, 18CR - 8.5NI (302), SOLUTION HEAT TREATED, HIGH DUCTILITY |
| SAE AMS5640V:2016 | STEEL, CORROSION-RESISTANT, BARS, WIRE, AND FORGINGS, 18CR - 9.0NI, FREE MACHINING |
| SAE AMS 5688 : 2012 | STEEL, CORROSION-RESISTANT, WIRE, 18CR - 9.0NI (SAE 30302), SPRING TEMPER |
| SAE AMS 5743 : 2014 | STEEL, CORROSION AND HEAT-RESISTANT, BARS AND FORGINGS 15.5CR - 4.5NI - 2.9MO - 0.10N SOLUTION HEAT TREATED, SUB-ZERO COOLED, EQUALIZED, AND OVER-TEMPERED |
| SAE AMS 5821 : 2011 | STEEL, CORROSION-RESISTANT, WELDING WIRE 12CR (SAE 51410 MODIFIED) FERRITE CONTROL GRADE |
| SAE AMS 5648 : 2016 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 17CR - 12NI - 2.5MO (316), SOLUTION HEAT TREATED |
| SAE AMS 5873 : 2014 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, SHEET, STRIP, AND PLATE, 65NI - 15.8CR - 15.2MO - 0.30AI - 0.05LA, CONSUMABLE ELECTRODE REMELTED, SOLUTION HEAT TREATED |
| SAE AMS 5629H : 2016 | STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, RINGS, AND EXTRUSIONS, 13CR - 8.0NI - 2.2MO - 1.1AL, VACUUM INDUCTION PLUS CONSUMABLE ELECTRODE MELTED, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
| SAE AMS 5951 : 2017 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, SHEET, STRIP, AND PLATE, 57NI - 20CR - 10CO - 8.5MO - 2.1TI - 1.5AL - 0.005B, VACUUM INDUCTION AND CONSUMABLE ELECTRODE MELTED, SOLUTION HEAT TREATED, PRECIPITATION HEAT TREATABLE |
| SAE AMS 5796 : 2012 | COBALT ALLOY, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 52CO - 20CR - 10NI - 15W |
| SAE AMS 5630 : 2013 | STEEL, CORROSION-RESISTANT, BARS, WIRE, AND FORGINGS, 17CR - 0.52MO (0.95 - 1.20C) (440C) |
| SAE AMS 6533 : 2015 | STEEL, WELDING WIRE 2.0CR - 10NI - 14CO - 1.0MO - (0.13 - 0.17C) VACUUM MELTED, ENVIRONMENT CONTROLLED PACKAGING |
| SAE AMS 5680 : 2011 | STEEL, CORROSION AND HEAT-RESISTANT, WELDING WIRE 18.5CR - 11NI - 0.40CB (NB) (SAE 30347) |
| SAE AMS 5611 : 2013 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 12CR, FERRITE CONTROLLED, CONSUMABLE ELECTRODE MELTED |
| SAE AMS 5853 : 2012 | STEEL, CORROSION AND HEAT-RESISTANT, BARS AND WIRE, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, CONSUMABLE ELECTRODE MELTED 1800 DEGREES F (982 DEGREES C) SOLUTION TREATED AND WORK-STRENGTHENED, 160 KSI (1103 MPA) TENSILE STRENGTH |
| SAE AMS 5875 : 2012 | COBALT ALLOY, CORROSION AND HEAT-RESISTANT, STRIP, 20CR - 15NI - 40CO - 7.0MO - 16FE, SOLUTION HEAT TREATED, COLD ROLLED, AND AGED, VACUUM INDUCTION PLUS VACUUM CONSUMABLE ELECTRODE MELTED |
| SAE AMS 5732 : 2012 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING AND RINGS, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, CONSUMABLE ELECTRODE MELTED 1800 DEGREES F (982 DEGREES C), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 5604 J: 2018 | STEEL, CORROSION RESISTANT, SHEET, STRIP, AND PLATE, 16.5CR - 4.0NI - 4.0CU - 0.30CB, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
| SAE AMS 5750 : 2017 | ALLOY BARS, FORGINGS, AND RINGS, CORROSION AND HEAT RESISTANT, NICKEL BASE - 15.5CR - 16MO - 3.8W - 5.5FE, SOLUTION HEAT TREATED |
| SAE AMS 5846 : 2016 | ALLOY, CORROSION AND HEAT-RESISTANT, BARS AND FORGINGS, 53NI - 15CR - 18.5CO - 5.0MO - 3.2TI - 4.2AL - 0.03B, DOUBLE VACUUM MELTED SOLUTION, STABILIZATION, AND PRECIPITATION HEAT TREATED |
| SAE AMS 5656F : 2015 | STEEL, CORROSION RESISTANT, BARS, WIRE, FORGINGS, EXTRUSIONS, AND RINGS, 9.0MN - 20CR - 6.5NI - 0.27N, SOLUTION HEAT TREATED |
| SAE AMS 5532 : 2017 | IRON ALLOY, CORROSION AND HEAT-RESISTANT, SHEET, STRIP, AND PLATE, 30FE - 21CR - 20NI - 20CO - 3.0MO - 2.5W - 1.0CB(NB) - 0.15N, SOLUTION HEAT TREATED |
| SAE AMS4675E : 2017 | NICKEL-COPPER ALLOY, CORROSION-RESISTANT, BARS AND FORGINGS, 67NI - 30CU |
| SAE AMS 5841 : 2016 | COBALT-NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS 19CR - 36CO - 25NI - 7.0MO - 0.50CB (NB) - 2.9TI - 0.20AL - 9.0FE VACUUM INDUCTION PLUS VACUUM CONSUMABLE ELECTRODE MELTED SOLUTION HEAT TREATED FOR WORK STRENGTHENING |
| SAE AMS5802E : 2017 | IRON-NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 41FE - 37.5NI - 14CO - 4.8CB (NB) - 1.5TI, VACUUM MELTED, LOW EXPANSION |
| SAE AMS 7727F : 2017(S2019) | IRON-NICKEL-COBALT ALLOY, BARS AND FORGINGS, 53FE - 29NI - 17CO, LOW EXPANSION, GLASS SEALING |
| SAE AMS 5672 : 1981(S2017) | STEEL WIRE, CORROSION RESISTANT, 11.8CR - 8.5NI - 0.30(CB + TA) - 1.1TI - 2.0CU, PRECIPITATION HARDENABLE, SPRING TEMPER |
| SAE AMS 5926 : 2016 | STEEL, CORROSION-RESISTANT, BARS, WIRE, TUBING, AND FORGINGS 15.5CR - 1.5SI - 0.3MO - 0.1N (0.45 - 0.60C) FOR BEARING APPLICATIONS |
| SAE AMS 5564 : 2013 | STEEL, CORROSION RESISTANT, TUBING 19CR - 10NI (SAE 30304) HIGH-PRESSURE HYDRAULIC, WELDED PLUS ULTRASONICALLY TESTED OR SEAMLESS COLD DRAWN, ONE EIGHTH - HARD TEMPER |
| SAE AMS 5701 : 2015 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 41.5NI - 16CR - 37FE - 2.9CB (NB) - 1.8TI, CONSUMABLE ELECTRODE REMELTED OR VACUUM INDUCTION MELTED, 1800 DEGREES F (982 DEGREES C) SOLUTION HEAT TREATED |
| SAE AMS 5857 : 2013 | STEEL, CORROSION-RESISTANT, BARS AND WIRE, 19CR - 10NI (304), HIGH YIELD STRENGTH, SOLUTION HEAT TREATED AND COLD WORKED |
| SAE AMS 5913 : 2014 | STEEL, CORROSION-RESISTANT, SHEET AND STRIP, 19CR - 9.2NI (SAE 30304), COLD ROLLED, FULL HARD, 185 KSI (1276 MPA) TENSILE STRENGTH |
| SAE AMS 5510S : 2014 | STEEL, CORROSION AND HEAT-RESISTANT, SHEET, STRIP AND PLATE, 18CR - 10.5NI - 0.40TI (SAE 30321) SOLUTION HEAT TREATED |
| SAE AMS 5870 : 2012 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, SHEET, STRIP, AND PLATE, 60.5NI - 23CR - 14FE - 0.35TI - 1.4AL, SOLUTION HEAT TREATED |
| SAE AMS 5745 : 2014 | STEEL, CORROSION AND HEAT-RESISTANT, BARS AND FORGINGS 16.5CR - 4.5NI - 2.9MO - 0.10N EQUALIZED AND OVER-TEMPERED |
| SAE AMS 5536 : 2012 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, SHEET, STRIP, AND PLATE, 47.5NI - 22CR - 1.5CO - 9.0MO - 0.60W - 18.5FE, SOLUTION HEAT TREATED |
| SAE AMS4575F:2017 | NICKEL-COPPER ALLOY TUBING, BRAZED, CORROSION RESISTANT, 67NI - 31CU, ANNEALED |
| SAE AMS 5706 : 2015 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 57NI - 19.5CR - 13.5CO - 4.3MO - 3.0TI - 1.4AL - 0.006B - 0.05ZR, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED, 1825 TO 1900 DEGREES F SOLUTION HEAT TREATED |
| SAE MAM 5536 : 2003 | NICKEL ALLOY, CORROSION AND HEAT RESISTANT, SHEET, STRIP, AND PLATE 47.5NI - 22CR - 1.5CO 9.0MO - 0.60W - 18.5FE SOLUTION HEAT TREATED |
| SAE AMS 5716 : 2016 | IRON-NICKEL ALLOY, HEAT RESISTANT, BARS, WIRE, FORGINGS, AND RINGS, 44FE - 18.5CR - 35.5NI - 1.1SI, SOLUTION HEAT TREATED |
| SAE AMS 5828 : 2012 | NICKEL ALLOY, CORROSION AND HEAT RESISTANT, WELDING WIRE 57NI - 19.5CR - 13.5CO - 4.2MO - 3.1TI - 1.4AL - 0.006B, VACUUM INDUCTION MELTED, SOLUTION HEAT TREATED |
| SAE AMS 5755 : 2014 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 64NI - 5.0CR - 24.5MO - 5.5FE, SOLUTION HEAT TREATED |
| SAE AMS 5931 : 2012 | STEEL, BARS, WIRE, FORGINGS, EXTRUSIONS, TUBING, AND RINGS WEAR, GALLING, AND CORROSION RESISTANT - 5.0MN - 3.5SI - 16.5CR - 5.0NI - 0.14N - SOLUTION HEAT TREATED |
| SAE MAM 5822 : 2000 | STEEL, CORROSION AND HEAT RESISTANT, WELDING WIRE 11.8CR - 2.8NI - 1.6CO - 1.8MO - 0.32V VACUUM INDUCTION MELTED |
| SAE AMS 5804 : 2013 | STEEL, CORROSION AND HEAT RESISTANT, WELDING WIRE, 15CR - 25.5NI - 1.3MO - 2.2TI - 0.006B - 0.30V |
| SAE AMS 5620 : 2012 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, AND FORGINGS, 13CR (0.30 - 0.40C) (SAE 51420F, 51420FSE), FREE-MACHINING GRADE |
| SAE AMS 5808 : 2018 | STEEL, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 19CR - 13NI - 2.5MO, HIGH FERRITE GRADE, TRACE ELEMENT CONTROLLED |
| SAE AMS 5911 : 2014 | STEEL, CORROSION-RESISTANT, SHEET AND STRIP, 19CR - 9.2NI (SAE 30304) COLD ROLLED, 1/2 HARD, 150 KSI (1034 MPA) TENSILE STRENGTH |
| SAE AMS 5508 : 2014 | STEEL, CORROSION AND HEAT RESISTANT, SHEET, STRIP, AND PLATE, 13CR - 2.0NI - 3.0W, ANNEALED |
| SAE AMS 5864 : 2013 | STEEL, CORROSION-RESISTANT, PLATE 13CR - 8.0NI - 2.2MO - 1.1AL VACUUM INDUCTION PLUS CONSUMABLE ELECTRODE MELTED SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
| SAE AMS 5500 : 2002 | STEEL, CORROSION-RESISTANT, LAMINATED, SHEET SURFACE BONDED |
| SAE AMS 5519 : 2014 | STEEL, CORROSION RESISTANT, SHEET AND STRIP, 18CR - 8NI (SAE 30301) COLD ROLLED, 185 KSI (1276 MPA) TENSILE STRENGTH |
| SAE AMS 5747 : 2012 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 72NI - 15.5CR - 0.95CB(NB) - 2.5TI - 0.70AL - 7.0FE, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
| SAE AMS 5860 : 2012 | STEEL, CORROSION-RESISTANT, SHEET, STRIP, AND PLATE, 12CR - 8.5NI - 0.30CB - 1.1TI - 2.0CU, MULTIPLE MELTED, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
| SAE AMS 5225 : 2014 | IRON-NICKEL ALLOY, STRIP, 49FE - 5.3CR - 42NI - 2.5TI - 0.55AL, SOLUTION HEAT TREATED, COLD ROLLED, 50% REDUCTION |
| SAE AMS 5568H : 2017 | STEEL, CORROSION AND HEAT RESISTANT, WELDED TUBING, 17CR - 7.1NI - 1.1AL, SOLUTION HEAT TREATED, PRECIPITATION-HARDENABLE |
| SAE AMS 5930 : 2017 | STEEL, CORROSION-RESISTANT, BARS AND FORGINGS 13.0CR - 2.5NI - 5.5CO - 2.0MO - 0.60V (0.05 - 0.09C) VACUUM INDUCTION PLUS VACUUM CONSUMABLE ELECTRODE MELTED |
| SAE AMS 5735 : 1974 | STEEL BARS, FORGINGS, TUBING, AND RINGS, CORROSION AND HEAT RESISTANT, 15CR - 26NI - 1. 3MO - 2.1TI - 0.30V, 1800 DEGREES F (982.2 DEGREES C) SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 5726 : 2015 | STEEL, CORROSION AND HEAT-RESISTANT, BARS AND WIRE, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, 1800 DEGREES F (982 DEGREES C) SOLUTION HEAT TREATED AND WORK-STRENGTHENED, CONSUMABLE ELECTRODE REMELTED, 200 KSI (1379 MPA) TENSILE STRENGTH CAPABILITY |
| SAE AMS 5937 : 2012 | STEEL, CORROSION-RESISTANT, BARS, WIRE, AND FORGINGS, 12CR - 11NI - 2MO - 1.5AL - 0.3TI, VACUUM INDUCTION PLUS VACUUM CONSUMABLE ELECTRODE MELTED, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
| SAE AMS5766E:2014 | ALLOY, CORROSION AND HEAT-RESISTANT, BARS AND FORGINGS, 21CR - 32.5NI - 0.38TI - 0.38AL - 45FE, SOLUTION HEAT TREATED |
| SAE AMS 5529 : 2012 | STEEL, CORROSION RESISTANT, SHEET AND STRIP, 17CR - 7.1NI - 1.1AL, SOLUTION HEAT TREATED AND COLD ROLLED, PRECIPITATION HARDENABLE, 0.0015 TO 0.100 INCH (0.038 TO 2.54 MM) NOMINAL THICKNESS |
| SAE AS 7246 : 2012 | INSERTS, SCREW THREADS, HELICAL COIL 72NI-15.5CR-0.95(CB+TA)-2.5TI-0.70AL-7.0FE CORROSION AND HEAT RESISTANT ALLOY PROCUREMENT SPECIFICATION FOR |
| SAE AMS 5938 : 2011 | STEEL, CORROSION-RESISTANT, BARS, WIRE, AND FORGINGS, 10CR - 12NI - 2MO - 1.45AL - 1.15TI, VACUUM INDUCTION PLUS VACUUM CONSUMABLE ELECTRODE MELTED, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
| SAE AMS 5891 : 2013 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 60NI - 22CR - 2.0MO - 14W - 0.35AL - 0.03LA, ANNEALED |
| SAE AMS 5892 : 2014 | ALLOY, SHEET AND STRIP, 42FE - 37.5NI - 14CO - 4.8CB (NB) - 1.6TI, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE, MULTIPLE MELTED, HIGH TEMPERATURE, LOW EXPANSION |
| SAE AMS 5561 : 2012 | STEEL, CORROSION AND HEAT-RESISTANT, WELDED AND DRAWN OR SEAMLESS AND DRAWN TUBING, 9.0MN - 20CR - 6.5NI - 0.28N, HIGH-PRESSURE HYDRAULIC |
| SAE AMS 5653 : 2012 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 17CR - 12NI - 2.5MO (0.030 MAX C) (316L), SOLUTION HEAT TREATED |
| SAE AMS 5570 : 2013 | STEEL, CORROSION AND HEAT-RESISTANT, SEAMLESS TUBING 18CR - 11NI - 0.40TI (321), SOLUTION HEAT TREATED |
| SAE AMS 5845 : 2014 | ALLOY, CORROSION-RESISTANT, ROUND BARS 20CR - 35NI - 35CO - 10MO VACUUM INDUCTION PLUS CONSUMABLE ELECTRODE VACUUM REMELTED SOLUTION HEAT TREATED, WORK STRENGTHENED, AND AGED |
| SAE AMS 5514 : 2012 | STEEL, CORROSION RESISTANT, SHEET, STRIP, AND PLATE 18CR - 11.5NI (SAE 30305) SOLUTION HEAT TREATED |
| SAE AMS 5567 : 2015 | STEEL, CORROSION RESISTANT, SEAMLESS OR WELDED HYDRAULIC TUBING, 19CR - 10NI (304), SOLUTION HEAT TREATED |
| SAE AMS 5623 D :1990(S2017) | STEEL BARS AND FORGINGS, HIGH EXPANSION, 9.5NO - 5.5MN (0.55 - 0.65C) ANNEALED |
| SAE AMS 5823 : 2012 | STEEL, CORROSION AND HEAT RESISTANT, WELDING WIRE 11.8CR - 2.8NI - 1.6CO - 1.8MO - 0.32V |
| SAE AMS 6501 : 2017 | STEEL, MARAGING, WELDING WIRE, 18NI - 8.0CO - 4.9MO - 0.40TI - 0.10AL, VACUUM INDUCTION MELTED, ENVIRONMENT CONTROLLED PACKAGING |
| SAE AMS 5934 : 2016 | STEEL, EXTRA HIGH TOUGHNESS, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, RINGS, AND EXTRUSIONS, 13CR - 8.0NI - 2.2MO - 1.1AL, VACUUM INDUCTION PLUS CONSUMABLE ELECTRODE MELTED, SOLUTION HEAT TREATED, PRECIPITATION-HARDENABLE |
| SAE AMS 5713K : 2016 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 53NI - 19CR - 11CO - 9.8MO - 3.2TI - 1.6AL - 0.006B, VACUUM MELTED, SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 5886 : 2014 | ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS 50NI - 20CR - 20CO - 5.8MO - 2.2TI - 0.45AL CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED 2100 DEGREES F (1149 DEGREES C) SOLUTION HEAT TREATED |
| SAE AMS 5772 E: 2016 | COBALT ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 40CO - 22CR - 22NI - 14.5W - 0.07LA, SOLUTION HEAT TREATED |
| SAE AMS 5854 : 2015 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, AND RINGS, 61NI - 20.5CR - 8.5MO - 3.4CB(NB) - 1.3TI - 5.0FE, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED SOLUTION HEAT TREATED |
| SAE AMS 5800 : 2006 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 54NI - 19CR - 11CO - 10MO - 3.2TI - 1.5AL - 0.006B, VACUUM INDUCTION MELTED |
| SAE AMS 5650 : 2018 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 23CR - 13.5NI (309S), SOLUTION HEAT TREATED |
| SAE AMS5751F : 1982(S2017) | Alloy Bars, Forgings, and Rings, Corrosion and Heat Resistant 54Ni - 17.5Cr - 16.5Co - 4.0Mo - 2.9Ti - 2.9Al - 0.006B Solution, Stabilization, and Precipitation Heat Treated Consumable Electrode or Vacuum Induction Melted |
| SAE AMS 5803 : 2015 | STEEL, CORROSION AND HEAT-RESISTANT, WELDING WIRE 16.4CR - 4.8NI - 0.22CB (NB) - 3.6CU CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED |
| SAE AMS 7490 : 2014 | RINGS, FLASH WELDED, CORROSION AND HEAT-RESISTANT AUSTENITIC STEELS, AUSTENITIC-TYPE IRON, NICKEL, OR COBALT ALLOYS, OR PRECIPITATION-HARDENABLE ALLOYS |
| SAE AMS 6466 : 2017 | STEEL, CORROSION-RESISTANT, WELDING WIRE, 5.2CR - 0.55MO |
| SAE AMS 5511 : 2013 | STEEL, CORROSION-RESISTANT, SHEET, STRIP, AND PLATE, 19CR - 9.5NI (304L), SOLUTION HEAT TREATED |
| SAE AMS 5763E : 2016 | STEEL, CORROSION RESISTANT BARS, FORGINGS, TUBING, AND RINGS, 15CR - 6.5NI - 0.75MO - 0.50CB (NB) - 1.5CU, SOLUTION HEAT TREATED |
| SAE AMS 5516 : 2012 | STEEL, CORROSION-RESISTANT, SHEET, STRIP, AND PLATE, 18CR - 9.0NI (SAE 30302), SOLUTION HEAT TREATED |
| SAE AMS 5962 : 2012 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, ROUND BARS AND WIRE, 52.5NI - 19CR - 3.0MO - 5.1CB - 0.90TI - 0.50AL - 18FE, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED, 1775 DEGREES F (968 DEGREES C) SOLUTION TREATED AND WORK STRENGTHENED, PRECIPITATION HARDENABLE |
| SAE AMS 5586 : 2012 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, WELDED TUBING, 57NI - 19.5CR - 13.5CO - 4.2MO - 2.9TI - 1.4AL - 0.006B - 0.08ZR, CONSUMABLE ELECTRODE REMELTED OR VACUUM INDUCTION MELTED, ANNEALED |
| SAE AMS 5641 : 2016 | STEEL, CORROSION-RESISTANT, BARS, WIRE, AND FORGINGS, 18.5CR - 10NI - 0.22SE (303SE), FREE-MACHINING; SWAGING OR UPSETTING SOLUTION HEAT TREATED |
| SAE AMS 5637 : 2012 | STEEL, CORROSION RESISTANT, BARS AND WIRE 18CR - 9.0NI (SAE 30302) SOLUTION HEAT TREATED, COLD DRAWN AND STRESS RELIEVED 125 KSI (862 MPA) TENSILE STRENGTH |
| SAE AMS 5632 : 2018 | STEEL, CORROSION-RESISTANT, BARS, WIRE, AND FORGINGS, 17CR - 0.50MO (0.95 - 1.20C) (440F), FREE-MACHINING, ANNEALED |
| SAE AMS 5635 : 2018 | STEEL, CORROSION-RESISTANT, BARS, WIRE, AND FORGINGS, 18CR - 9NI - 0.21PB (303PB), FREE-MACHINING, SOLUTION HEAT TREATED |
| SAE AMS 5583 : 2013 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, SEAMLESS TUBING 72NI - 15.5CR - 0.95CB - 2.5TI - 0.70AL - 7.0FE, VACUUM MELTED, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE TO 170 KSI (1172 MPA) TENSILE STRENGTH |
| SAE AMS 5555 : 2013 | NICKEL WIRE AND RIBBON 99NI |
| SAE AMS 5528 : 2012 | STEEL, CORROSION-RESISTANT, SHEET, STRIP, AND PLATE, 17CR - 7.1NI - 1.1AL, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
| SAE AMS 5844 : 2014 | ALLOY, CORROSION-RESISTANT, ROUND BARS, 20CR - 35NI - 35CO - 10MO, VACUUM INDUCTION PLUS CONSUMABLE ELECTRODE VACUUM REMELTED, SOLUTION HEAT TREATED AND WORK STRENGTHENED |
| SAE AMS 5549H:1987(S2017) | STEEL, CORROSION AND HEAT RESISTANT, PLATE 15.5CR - 4.5NI - 2.9MO - 0.10N SOLUTION HEAT TREATED |
| SAE AMS 5678 : 2013 | STEEL, CORROSION RESISTANT, WIRE, 17CR - 7.1NI - 1.1AL, COLD DRAWN, PRECIPITATION-HARDENABLE |
| SAE AMS 5518 : 2014 | STEEL, CORROSION RESISTANT, SHEET AND STRIP 18CR - 8NI COLD ROLLED, 150 KSI (1034 MPA) TENSILE STRENGTH |
| SAE AMS 5890 : 2015 | NICKEL, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND EXTRUSIONS, THORIA DISPERSION STRENGTHENED, 2.2THO[2], STRESS-RELIEVED |
| SAE AMS 5541 : 2013 | NICKEL ALLOY, CORROSION AND HEAT RESISTANT, SHEET AND STRIP 73NI - 15.5CR - 2.4TI - 0.7AL - 7.0FE ANNEALED |
| SAE AMS 7719 : 2015 | NICKEL-IRON ALLOY, MAGNETIC, SHEET AND STRIP, 50NI - 50FE, STAMPING QUALITY, HALF-HARD TEMPER |
| SAE AMS 5501 : 2002 | STEEL, CORROSION RESISTANT, SHEET, STRIP, AND FOIL, 19CR - 9.5NI (304), COLD ROLLED, 125 KSI (862 MPA) TENSILE STRENGTH |
| SAE AMS 5574 : 2013 | STEEL, CORROSION AND HEAT RESISTANT, SEAMLESS TUBING, 23CR - 13.5NI (SAE 30309S) SOLUTION HEAT TREATED |
| SAE AMS 5565L : 2013 | STEEL, CORROSION RESISTANT, WELDED TUBING, 19CR - 9.5NI (304), SOLUTION HEAT TREATED |
| SAE AMS 5572 : 2012 | STEEL, CORROSION AND HEAT-RESISTANT, SEAMLESS TUBING, 25CR - 20NI (SAE 30310S), SOLUTION HEAT TREATED |
| SAE AMS 5558H : 2016 | STEEL, CORROSION AND HEAT-RESISTANT, WELDED TUBING 18CR - 10.5NI - 0.70CB (NB) (347) THIN WALL SOLUTION HEAT TREATED |
| SAE AMS 5762 : 2016 | STEEL, CORROSION RESISTANT, BARS, WIRE, AND FORGINGS, 5.8MN - 17CR - 5.8NI - 2.0CU - 0.26S, FREE MACHINING, SOLUTION HEAT TREATED |
| SAE AMS 5905 : 2012 | STEEL, CORROSION-RESISTANT, SHEET AND STRIP, 18CR - 9.0NI (SAE 30302), COLD ROLLED, 3/4 HARD, 175 KSI (1207 MPA) TENSILE STRENGTH |
| SAE AMS 5605 : 2013 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, SHEET, STRIP, AND PLATE, 41.5NI - 16CR - 37FE - 2.9CB(NB) - 1.8TI, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED, 1800 DEGREES F (982 DEGREES C) SOLUTION HEAT TREATED |
| SAE AMS 5929 : 2014 | STEEL, CORROSION-RESISTANT, BARS AND FORGINGS, 11.5CR -10NI - 1.0AL - 0.5TI - 1.0CU - 1.0W, VACUUM INDUCTION PLUS VACUUM CONSUMABLE ELECTRODE MELTED SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
| SAE AMS 5786 : 2015 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 62.5NI - 5.0CR - 24.5MO - 5.5FE |
| SAE AMS 5548 : 2012 | STEEL, CORROSION AND HEAT-RESISTANT, SHEET AND STRIP, 16.5CR - 4.5NI - 2.9MO - 0.10N, 1850 TO 1975 DEGREES F (1010 TO 1079 DEGREES C) ANNEALED |
| SAE AMS 5525 : 2012 | STEEL, CORROSION AND HEAT RESISTANT, SHEET, STRIP, AND PLATE 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, 1800 DEGREE F (982 DEGREE C) SOLUTION HEAT TREATED |
| SAE AMS 5682 : 2012 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 78NI - 20CR |
| SAE AMS 5731 : 2012 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, CONSUMABLE ELECTRODE MELTED, 1800 DEGREES F (982 DEGREES C) SOLUTION HEAT TREATED |
| SAE AS7245:2012 | INSERTS, SCREW THREAD, HELICAL COIL 19CR-9.2NI, CORROSION RESISTANT STEEL, PROCUREMENT SPECIFICATION FOR |
| SAE AMS 5830 : 2012 | NICKEL-IRON ALLOY, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 12.5CR - 42.5NI - 6.0MO - 2.7TI - 0.015B - 35FE |
| SAE AMS 5668 : 2012 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 72NI - 15.5CR - 7.0FE - 2.5TI - 1.0CB (NB) - 0.70AL, 2100 DEGREES F (1149 DEGREES C) SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 7493 : 2012 | RINGS, FLASH WELDED FERRITIC AND MARTENSITIC CORROSION-RESISTANT STEELS |
| SAE AMS 5837G : 2012 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 62NI - 21.5CR - 9.0MO - 3.7CB(NB) |
| SAE AMS 5925 : 2012 | STEEL, CORROSION -RESISTANT, BARS, WIRE, AND FORGINGS, 15.5CR - 1.8MO - 0.20N (0.37 - 0.45C), ELECTROSLAG REMELTED |
| SAE AMS 5835 : 2015 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 72NI - 3.2MN - 20CR - 2.5CB - 0.48TI, VACUUM INDUCTION MELTED, ENVIRONMENT CONTROLLED PACKAGING |
| SAE AS 5685 : 2015 | STEEL, CORROSION RESISTANT, SAFETY WIRE, 18CR-11.5NI (UNS S30500), SOLUTION HEAT TREATED, COLD FINISHED |
| SAE AMS 5683:2012(S2017) | ALLOY WELDING WIRE, CORROSION AND HEAT RESISTANT, 75NI - 15.5CR - 8.0FE |
| SAE AMS 5738 : 2013 | STEEL, CORROSION-RESISTANT, BARS AND WIRE, 18CR - 9NI (SAE 30303F), FREE MACHINING, HIGH YIELD STRENGTH, SOLUTION HEAT TREATED AND COLD WORKED |
| SAE AMS 5744 : 2013 | STEEL, CORROSION AND HEAT-RESISTANT, BARS AND FORGINGS, 15.5CR - 4.5NI - 2.9MO - 0.10N, HEAT TREATED, 170 KSI (1172 MPA) TENSILE STRENGTH |
| SAE AMS 5627 : 2013 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 17CR (SAE 51430), ANNEALED |
| SAE AMS 5932 : 2012 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS AND TUBING 14.5CR - 2.3NI - 12.5CO - 4.0MO - 0.60V - 0.03CB(NB), CARBURIZING, PREMIUM AIRCRAFT-QUALITY, DOUBLE VACUUM MELTED |
| SAE AMS 5517 : 2010 | STEEL, CORROSION RESISTANT, SHEET AND STRIP, 18CR - 8NI (301) COLD ROLLED, 125 KSI (862 MPA) TENSILE STRENGTH |
| SAE AMS 5544 : 2014 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, SHEET, STRIP, AND PLATE, 57NI - 19.5CR - 13.5CO - 4.2MO - 3.0TI - 1.4AL - 0.05ZR - 0.006B, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED, ANNEALED |
| SAE AMS 4731 : 2012 | NICKEL-COPPER ALLOY WIRE AND RIBBON, CORROSION-RESISTANT, 67NI - 31CU, ANNEALED |
| SAE AMS 5612 : 2012 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 12CR, FERRITE CONTROLLED, ANNEALED |
| SAE AMS 5504 : 2018 | Steel, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 12.5Cr (410) Annealed |
| SAE AMS 5596 : 2017 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, SHEET, STRIP, FOIL AND PLATE, 52.5NI - 19CR - 3.0MO - 5.1CB (NB) - 0.90TI - 0.50AL - 18FE, CONSUMABLE ELECTRODE REMELTED OR VACUUM INDUCTION MELTED, 1775 DEGREES F (968 DEGREES C) SOLUTION HEAT TREATED |
| SAE AMS 5597 : 2016 | NICKEL ALLOY, CORROSION AND HEAT RESISTANT, SHEET, STRIP, AND PLATE, 52.5NI - 19CR - 3.0MO - 5.1CB (NB) - 0.90TI - 0.50AL - 18FE, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED, 1950 DEGREES F (1066 DEGREES C) SOLUTION HEAT TREATED |
| SAE AMS 5737 : 2012 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS AND TUBING, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, CONSUMABLE ELECTRODE MELTED, 1650 DEGREES F (899 DEGREES C), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 5547 : 2012 | STEEL, CORROSION AND HEAT-RESISTANT, SHEET AND STRIP, 15.5CR - 4.5NI - 2.9MO - 0.10N, SOLUTION HEAT TREATED |
| SAE AMS 5915 : 2014 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS AND FORGINGS, 57NI - 20CR - 10CO - 8.5MO - 2.1TI - 1.5AL - 0.005B, VACUUM INDUCTION AND CONSUMABLE ELECTRODE MELTED, SOLUTION HEAT TREATED, PRECIPITATION HEAT TREATABLE |
| SAE AMS 5671 : 2013 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 72NI - 15.5CR - 0.95CB - 2.5TI - 0.70AL - 7.0FE, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED, 1800 DEGREES F (982 DEGREES C) SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
| SAE AMS 5556 : 2016 | STEEL, CORROSION AND HEAT-RESISTANT, SEAMLESS OR WELDED HYDRAULIC TUBING 18CR - 11NI - 0.70CB (347) SOLUTION HEAT TREATED |
| SAE AMS 5940 : 2014 | ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS 34CO - 3.0CR - 28NI - 3.0CB(NB) - 5.5AL - 0.008B - 25.5FE MULTIPLE MELTED, HIGH TEMPERATURE, OXIDATION-RESISTANT, LOW EXPANSION SOLUTION HEAT TREATED, PRECIPITATION-HARDENABLE |
| MIL-N-62418 Base Document:1992 | NICKEL BASE ALLOY, SHEET & PLATE CORROSION & HEAT RESISTANT, SOLUTION HEAT TREATED (HAYNES 230) (METRIC) |
| SAE AMS 4730 : 2017 | NICKEL-COPPER ALLOY WIRE, CORROSION-RESISTANT, 67NI - 31CU ANNEALED (400) |
| SAE AMS5659S : 2016 | Steel, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions 15Cr - 4.5Ni - 0.30Cb (Nb) - 3.5Cu<br> |
| SAE AMS 5749 : 2014 | STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, AND TUBING 14.5CR - 4.0MO - 1.2V (1.10-1.20C) PREMIUM QUALITY FOR BEARING APPLICATIONS, DOUBLE VACUUM MELTED |
| SAE AMS 5689 : 2018 | STEEL, CORROSION AND HEAT RESISTANT, WIRE 18CR - 10.5NI - 0.40TI (321) SOLUTION HEAT TREATED |
| SAE AMS 5664 : 2017 | NICKEL ALLOY, CORROSION AND HEAT RESISTANT, BARS, FORGINGS, AND RINGS, 52.5NI - 19CR - 3.0MO - 5.1CB (NB) - 0.90TI - 0.50AL - 18FE, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED 1950 DEGREES F (1066 DEGREES C) SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
| SAE AMS 5810 : 2015 | STEEL, CORROSION AND HEAT RESISTANT, FLAT WIRE, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, 1800 DEGREES F (982 DEGREES C) SOLUTION TREATED, COLD DRAWN OR COLD ROLLED AND AGED, CONSUMABLE ELECTRODE REMELTED |
| SAE AMS 5708 : 2015 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, WIRE FORGINGS, AND RINGS, 58NI - 19.5CR - 13.5CO - 4.3MO - 3.0TI - 1.4AL - 0.05ZR - 0.006B, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED, 1975 DEGREES F (1079 DEGREES C) SOLUTION HEAT TREATED |
| SAE AMS 5887 : 2015 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 54NI - 22CR - 12.5CO - 9.0MO - 1.2AL, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED, ANNEALED |
| SAE AMS 5746 : 2012 | ALLOY, CORROSION AND HEAT RESISTANT, BARS AND FORGINGS - 15CR - 45NI - 4.1MO - 4.1W - 3.0TI - 1.0AL - 31FE (D979) CONSUMABLE ELECTRODE VACUUM MELTED, SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 5831 : 2015 | ALLOY, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 29FE - 22CR - 21NI - 18.5CO - 3.2MO - 2.8W - 0.78TA - 0.30AL - 0.05ZR - 0.05LA - 0.20N |
| SAE AMS 5912 : 2014 | STEEL, CORROSION-RESISTANT, SHEET AND STRIP, 19CR - 9.2NI (SAE 30304), COLD ROLLED, 3/4 HARD, 175 KSI (1207 MPA) TENSILE STRENGTH |
| SAE AMS 5884 : 2016 | IRON-NICKEL ALLOY, BARS, FORGINGS, AND RINGS, 42FE - 37.5NI - 14CO - 4.8CB(NB) - 1.6TI, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE MULTIPLE MELTED, HIGH TEMPERATURE, LOW EXPANSION |
| SAE AMS 5607 E: 2012 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, SHEET, STRIP, AND PLATE, 73NI - 7.0CR - 16.5MO, SOLUTION HEAT TREATED |
| SAE AMS 5964 : 2012 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, WELDING WIRE NI - 18CR - 2.8MO - 5.5CB(NB) - 0.70TI - 1.50AL - 10FE - 9CO - 1W CONSUMABLE ELECTRODE REMELTED OR VACUUM INDUCTION MELTED |
| SAE AMS 5608 : 2016 | COBALT ALLOY, CORROSION AND HEAT RESISTANT, SHEET, STRIP, AND PLATE, 40CO - 22CR - 22NI - 14.5W - 0.07LA, SOLUTION HEAT TREATED |
| SAE AMS 5784 : 2011 | STEEL, CORROSION AND HEAT RESISTANT, WELDING WIRE 29CR - 9.5NI |
| SAE AMS 5812 : 2015 | STEEL, CORROSION AND HEAT RESISTANT, WELDING WIRE, 15CR - 7.1NI - 2.4MO - 1.0AL, VACUUM INDUCTION MELTED |
| SAE AMS 5774 : 2015 | STEEL, CORROSION AND HEAT-RESISTANT, WELDING WIRE 16.5CR - 4.5NI - 2.9MO - 0.10N |
| SAE AMS 5759M : 2015 | COBALT ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGING STOCK, FORGINGS, AND RINGS 52CO - 20CR - 10NI - 15W |
| SAE AMS 5513 : 2015 | STEEL, CORROSION-RESISTANT, SHEET, STRIP, AND PLATE, 19CR - 9.2NI (SAE 30304), SOLUTION HEAT TREATED |
| SAE AMS 5817 : 2011 | STEEL, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 13CR - 2.0NI - 3.0W |
| SAE AMS 5692 : 2011 | STEEL, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 19CR - 12.5NI - 2.5MO |
| SAE AMS 5687N : 2018 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, WIRE, 74NI - 15.5CR - 8.0FE, ANNEALED |
| SAE AMS 5825 : 2017 | STEEL, CORROSION-RESISTANT, WELDING WIRE 16.4CR - 4.8NI - 0.22CB(NB) - 3.6CU |
| SAE AMS 5662 : 2016 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS 52.5NI - 19CR - 3.0MO - 5.1CB (NB) - 0.90TI - 0.50AI - 18FE CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED 1775 DEGREES F (968 DEGREES C) SOLUTION HEAT TREATED, PRECIPITATION-HARDENABLE |
| SAE AMS 5869 : 2013 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, SHEET, STRIP, AND PLATE 62NI - 21.5CR - 9.0MO - 3.7CB SOLUTION HEAT TREATED |
| SAE AMS 5904 : 2012 | STEEL, CORROSION-RESISTANT, SHEET AND STRIP, 18CR - 9.0NI (SAE 30302), COLD ROLLED, 1/2 HARD, 150 KSI (1034 MPA) TENSILE STRENGTH |
| SAE AMS 5540 : 2017 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, SHEET, STRIP, AND PLATE, 74NI - 15.5CR - 8.0FE, ANNEALED |
| SAE AMS 5789 : 2014 | COBALT ALLOY, CORROSION AND HEAT-RESISTANT, WELDING WIRE 54CO - 25.5CR - 10.5NI - 7.5W |
| SAE AMS 5776 : 2008(R2015) | STEEL, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 12.5CR (SAE 51410) |
| SAE AMS 5829 : 2011 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 56NI - 19.5CR - 16.5CO - 2.5TI - 1.5AL, VACUUM INDUCTION MELTED |
| SAE AMS 5818 : 2013 | STEEL, CORROSION AND HEAT RESISTANT, WELDING WIRE, 9.0MN - 20CR - 6.2NI - 0.20N |
| SAE AMS 5769 : 2014 | ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 21CR - 20NI - 20CO - 3.0MO - 2.5W - 1.0(CB+TA) - 0.15N - 32FE SOLUTION HEAT TREATED |
| SAE AMS 5563 : 2012 | STEEL, CORROSION RESISTANT, SEAMLESS OR WELDED TUBING, 19CR - 9.5NI (SAE 30304), COLD DRAWN, 1/4 HARD TEMPER |
| SAE AMS 5591 : 2012 | STEEL, CORROSION AND HEAT-RESISTANT, TUBING, SEAMLESS, 12.5CR (SAE 51410), ANNEALED |
| SAE AMS 5707 : 2017 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS 57NI - 19.5CR - 13.5CO - 4.3MO - 3.0TI - 1.4AL - 0.05ZR - 0.006B CONSUMABLE ELECTRODE REMELTED OR VACUUM INDUCTION MELTED 1825 TO 1900 DEGREES F (996 TO 1038 DEGREES C) SOLUTION, STABILIZATION, AND PRECIPITATION HEAT TREATED |
| SAE AMS 5690 : 2015 | STEEL, CORROSION AND HEAT RESISTANT, WIRE, 17CR - 12NI - 2.5MO (316), SOLUTION HEAT TREATED |
| SAE AMS 5814 : 2011 | COBALT ALLOY, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 52CO - 20CR - 20NI - 7.5TA, VACUUM MELTED |
| SAE AMS 5833 : 2014 | COBALT ALLOY, CORROSION AND HEAT-RESISTANT, ROUND WIRE 20CR - 15NI - 40CO - 7.0MO - 16FE SOLUTION HEAT TREATED AND COLD DRAWN |
| SAE AMS 5768 : 2018 | ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 21CR - 20NI - 20CO - 3.0MO - 2.5W - 1.0CB - 0.15N - 31FE, SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 5876 : 2018 | COBALT ALLOY, CORROSION AND HEAT-RESISTANT, STRIP, 20CR - 15NI - 40CO - 7.0MO - 16FE, VACUUM INDUCTION PLUS CONSUMABLE ELECTRODE REMELTED, SOLUTION HEAT TREATED AND COLD ROLLED |
| SAE AMS 5542 : 2012 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, SHEET, STRIP, AND PLATE, 72NI - 15.5CR - 0.95CB(NB) - 2.5TI - 0.70AL - 7.0FE, ANNEALED |
| SAE AMS 5700G : 2018 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 13.5CR - 13.5NI - 0.35MO - 2.2W, ANNEALED |
| SAE AMS 5584 : 2012 | STEEL, CORROSION AND HEAT RESISTANT, SEAMLESS AND WELDED HYDRAULIC TUBING, 17CR - 12NI - 1.5MO - 0.03C MAX, COLD DRAWN, 1/8 HARD TEMPER |
| SAE AMS 5919 : 2013 | COBALT-NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, ROUND BARS 19CR - 36CO - 25NI - 7.0MO - 0.50CB (NB) - 2.9TI - 0.20AL - 9.0FE VACUUM INDUCTION PLUS VACUUM CONSUMABLE ELECTRODE MELTED SOLUTION HEAT TREATED AND WORK STRENGTHENED, MODIFIED STRENGTH |
| SAE AMS 5645 : 2016 | STEEL, CORROSION AND HEAT RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 18CR - 10NI - 0.40TI (321), SOLUTION HEAT TREATED |
| SAE AMS 5955 : 2016 | STEEL, CORROSION-RESISTANT, BARS, WIRE, AND FORGINGS 10CR - 12NI - 2MO - 1.45AL - 1.15TI VACUUM INDUCTION PLUS VACUUM CONSUMABLE ELECTRODE MELTED SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
| SAE AMS 5933 : 1999 | STEEL, CORROSION RESISTANT BARS AND FORGINGS, 12.5CR - 1.0NI - 15.5CO - 2.0MO, VACUUM INDUCTION PLUS, VACUUM CONSUMABLE ELECTRODE REMELTED |
| SAE AMS 5894 : 2016 | COBALT ALLOYS, BARS, SHEET, AND PLATE, 60CO - 28CR - 4.5W - 1.15C, SOLUTION HEAT TREATED |
| SAE AMS 5506 : 2018 | STEEL, CORROSION AND HEAT RESISTANT, SHEET, STRIP, AND PLATE, 13CR (0.30 - 0.40C) (420), ANNEALED |
| SAE AS 7207 : 2012 | SPRING PINS, TUBULAR, SLOTTED CORROSION AND MODERATE HEAT RESISTANT STEEL PROCUREMENT SPECIFICATION FOR |
| SAE AMS 5670 : 2012 | NICKEL ALLOY, CORROSION AND HEAT RESISTANT, BARS, FORGINGS, AND RINGS - 72NI - 15.5CR - 0.95CB - 2.5TI - 0.70AL - 7.0FE, 1800 DEGREE F (982 DEGREE C) SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
| SAE AMS 5754 : 2012 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 47.5NI - 22CR - 1.5CO - 9.0MO - 0.60W - 18.5FE, SOLUTION HEAT TREATED |
| SAE AMS 7726 H : 2000(S2017) | IRON-NICKEL-COBALT ALLOY, WIRE, 53FE - 2.9NI - 17CO, LOW EXPANSION, GLASS SEALING, ANNEALED |
| SAE AMS 5651 : 2012 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 25CR - 20NI (SAE 30310), SOLUTION HEAT TREATED |
| SAE AMS 5822 : 2011 | STEEL, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 11.8CR - 2.8NI - 1.6CO - 1.8MO - 0.32V, VACUUM INDUCTION MELTED |
| SAE AMS 5805 : 2012 | STEEL, CORROSION AND HEAT RESISTANT, WELDING WIRE, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.004B - 0.30V, VACUUM INDUCTION MELTED, ENVIRONMENT CONTROLLED PACKAGING |
| SAE AMS 5702 : 2018 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 41.5NI - 16CR - 37FE - 2.9CB (NB) - 1.8TI, CONSUMABLE ELECTRODE REMELTED OR VACUUM INDUCTION MELTED, 1750 DEGREES F (954 DEGREES C) SOLUTION HEAT TREATED |
| SAE AMS 5441 : 2016 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, NI - 18CR - 2.8MO - 5.5CB(NB) - 0.70TI - 1.50AL - 10FE - 9CO - 1W, CONSUMABLE ELECTRODE REMELTED OR VACUUM INDUCTION MELTED, 1775 DEGREES F (968 DEGREES C) SOLUTION HEAT TREATED, PRECIPITATION-HARDENABLE |
| SAE AMS 7718 : 2015 | NICKEL-IRON ALLOY, MAGNETIC, BARS, RODS, TUBING, AND FORGINGS 50NI - 50FE |
| SAE AMS 4574F : 2017 | NICKEL-COPPER ALLOY, CORROSION RESISTANT, TUBING, SEAMLESS 67NI - 31CU ANNEALED |
| SAE AMS 5794 : 2002(R2013) | IRON ALLOY, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 31FE - 21CR - 20NI - 20CO - 3.0MO - 2.5W - 1.0CB - 0.15N, ANNEALED |
| SAE AMS 5771 : 2014 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 74NI - 7.0CR - 16.5 MO, SOLUTION HEAT TREATED |
| SAE MAM 5706 : 2003 | ALLOY BARS, FORGINGS, AND RINGS, CORROSION AND HEAT RESISTANT, 57NI - 19.5CR - 13.5CO - 4.3MO - 3.0TI - 1.4A1 - 0.006B - 0.05ZR, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED, 995 DEGREES - 1040 DEGREES C SOLUTION HEAT TREATED |
| SAE AMS 5582 : 2013 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, SEAMLESS TUBING, 72NI - 15.5CR - 0.95CB - 2.5TI - 0.70AL - 7.0FE, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE TO 155 KSI (1069 MPA) TENSILE STRENGTH |
| SAE AMS 5863E : 2009(R2015) | STEEL, CORROSION RESISTANT, SHEET, STRIP, AND PLATE, 15CR - 6.5NI - 0.75MO - 0.60CB - 1.5CU, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
| SAE AMS 5593 : 2016 | NICKEL ALLOY, CORROSION AND HEAT RESISTANT, SHEET, STRIP, AND PLATE, 45.5NI - 25.5CR - 3.2CO - 3.2MO - 3.2W - 18.5FE, SOLUTION HEAT TREATED |
| SAE AMS 5600 : 2007 | STEEL, CORROSION-RESISTANT, SHEET, LAMINATED, EDGE BONDED |
| SAE AMS 5858 : 2015 | STEEL, CORROSION AND HEAT RESISTANT, SHEET, STRIP, AND PLATE, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, MULTIPLE MELTED, 1800 DEGREES F (982 DEGREES C) SOLUTION HEAT TREATED, WELDING GRADE, PRECIPITATION HARDENABLE |
| SAE AMS 5652J : 2016 | STEEL, CORROSION AND HEAT RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS 25CR - 20NI - 2.0SI (314) SOLUTION HEAT TREATED |
| SAE AMS 5922 : 2015 | STEEL, CORROSION-RESISTANT, BARS, AND FORGINGS, 10CR - 5.5NI - 14CO - 2MO - 1W (0.19-0.23C), VACUUM INDUCTION MELTED, VACUUM ARC REMELTED, NORMALIZED, ANNEALED |
| SAE AMS 7717 : 2015 | NICKEL-IRON ALLOY, MAGNETIC, SHEET AND STRIP, 50NI - 50FE, ANNEALED, FORMING GRADE |
| SAE AMS 5560 : 2016 | STEEL, CORROSION RESISTANT, SEAMLESS TUBING, 19CR - 10NI (304), SOLUTION HEAT TREATED |
| SAE AMS 5639 : 2017 | STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 19CR - 10NI, SOLUTION HEAT TREATED |
| SAE AMS 5871 : 2015 | ALLOY, CORROSION AND HEAT-RESISTANT, SHEET, STRIP AND PLATE, 21CR - 32.5NI - 0.38TI - 0.38AL - 45FE, SOLUTION HEAT TREATED |
| SAE AMS 5595 : 2014 | STEEL, CORROSION RESISTANT, SHEET, STRIP, AND PLATE, 9.0MN - 20CR - 6.5NI - 0.28N, SOLUTION HEAT TREATED |
| SAE AMS 5660 : 2015 | NICKEL-IRON ALLOY, CORROSION AND HEAT-RESISTANT, BARS AND FORGINGS, 12.5CR - 42.5NI - 6.0MO - 2.7TI - 0.015B - 34FE, CONSUMABLE ELECTRODE REMELTED OR VACUUM INDUCTION MELTED SOLUTION, STABILIZATION, AND PRECIPITATION HEAT TREATED |
| SAE AMS 5699 : 2013 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, WIRE, 72NI - 15.5CR - 0.95CB - 2.5TI - 0.70AL - 7.0FE, SPRING TEMPER, PRECIPITATION HARDENABLE |
| SAE AMS 5832 : 2015 | NICKEL ALLOY, CORROSION AND HEAT RESISTANT, WELDING WIRE, 52.5NI - 19CR - 3.0MO - 5.1CB(NB) - 0.90TI - 0.50AL - 18FE, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED |
| SAE AMS 5811 : 2012 | STEEL, CORROSION AND HEAT RESISTANT, WELDING WIRE, 15CR - 30NI - 1.2MO - 2.2TI - 0.25AL - 0.001B - 0.030V (0.01 - 0.03C), VACUUM INDUCTION MELTED, ENVIRONMENT CONTROLLED PACKAGING |
| SAE AMS 5923 : 2013 | STEEL, CORROSION-RESISTANT, BARS, WIRE, AND FORGINGS,17CR - 0.52MO (0.95 - 1.20C) (SAE 51440C), FOR BEARING APPLICATIONS |
| SAE AMS 5666H : 2016 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, EXTRUSIONS, AND RINGS, 62NI - 21.5CR - 9.0MO - 3.65CB (NB), ANNEALED |
| SAE AMS 4676 : 2017 | NICKEL-COPPER ALLOY, CORROSION-RESISTANT, BARS AND FORGINGS, 66.5NI - 3.0AL - 0.62TI - 28CU, HOT-FINISHED, PRECIPITATION HARDENABLE |
| SAE AMS 5647 : 2017 | STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 19CR - 9.5NI, SOLUTION HEAT TREATED |
| SAE AMS 5537 : 2017 | COBALT ALLOY, CORROSION AND HEAT-RESISTANT, SHEET, STRIP, FOIL, AND PLATE, 52CO - 20CR - 10NI - 15W, SOLUTION HEAT TREATED |
| SAE AMS 5758 : 2014 | ALLOY, CORROSION-RESISTANT, BARS, 20CR - 35NI - 35CO - 10MO, VACUUM INDUCTION PLUS CONSUMABLE ELECTRODE VACUUM REMELTED, SOLUTION HEAT TREATED FOR WORK STRENGTHENING |
| SAE AMS 5580 : 2015 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, SEAMLESS TUBING 74NI - 15.5CR - 8.0FE, ANNEALED |
| SAE AMS 5505 : 2018 | STEEL, CORROSION AND HEAT RESISTANT, SHEET, STRIP, AND PLATE, 12CR (410 MODIFIED), FERRITE CONTROLLED, ANNEALED |
| SAE AMS 5898 : 2018 | STEEL, CORROSION RESISTANT, BARS, WIRE, AND FORGINGS, 15.2CR - 1.0MO - 0.40N - (0.28 - 0.34C), CONSUMABLE ELECTRODE MELTED UNDER PRESSURE |
| SAE AMS 5559 : 2012 | STEEL, CORROSION AND HEAT-RESISTANT, WELDED TUBING, 18CR - 10.5NI - 0.40TI (SAE 30321), THIN WALL, SOLUTION HEAT TREATED |
| MIL-N-62623 Base Document:1988 | NICKEL BASE ALLOY, SHEET, CORROSION AND HEAT RESISTANT |
| SAE AMS 5790 : 2014 | STEEL, CORROSION AND HEAT-RESISTANT, WELDING WIRE 20CR - 10NI - 0.75CB, HIGH FERRITE GRADE |
| SAE AMS 5606 : 2013 | ALLOY, CORROSION AND HEAT-RESISTANT, SHEET, STRIP, AND PLATE 41.5NI - 16CR - 37FE - 2.9CB (NB) - 1.8TI CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED 1750 DEGREES F (954 DEGREES C) SOLUTION HEAT TREATED |
| SAE AMS 5840 : 2010 | STEEL, CORROSION AND HEAT RESISTANT, WELDING WIRE, 13CR - 8.0NI - 2.3MO - 1.1AL, VACUUM MELTED |
| SAE AMS 5599 : 2016 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, SHEET, STRIP, AND PLATE, 62NI - 21.5CR - 9.0MO - 3.7 CB (NB), ANNEALED |
| SAE AMS 5712 : 2016 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 53NI - 19CR - 11CO - 9.8MO - 3.2TI - 1.6AL - 0.006B, VACUUM MELTED, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
| SAE AMS 5773 : 2012 | STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 15CR - 6.5NI - 0.75MO - 0.30 CB (NB) - 1.5CU, CONSUMABLE ELECTRODE REMELTED, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
| SAE AMS 5598 : 2012 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, SHEET, STRIP, AND PLATE, 72NI - 15.5CR - 0.95 (CB (NB) + TA) - 2.5TI - 0.70AL - 7.0FE, CONSUMABLE ELECTRODE, REMELTED OR VACUUM INDUCTION MELTED, SOLUTION HEAT TREATED, PRECIPITATION-HARDENABLE |
| SAE AMS 5698 : 2013 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, WIRE, 72NI - 15.5CR - 0.95CB - 2.5TI - 0.70AL - 7.0FE, NO. 1 TEMPER, PRECIPITATION HARDENABLE |
| SAE AMS 4677 : 2017 | NICKEL-COPPER ALLOY, CORROSION RESISTANT, BARS AND FORGINGS 66.5NI - 2.9AL - 30CU ANNEALED |
| SAE AMS 5877 : 2012 | IRON ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 29FE - 22CR - 21NI - 18.5CO - 3.2MO - 2.8W - 0.78TA - 0.30AL - 0.05LA - 0.20N, SOLUTION HEAT TREATED |
| SAE AMS 5906C : 2018 | STEEL, CORROSION-RESISTANT, SHEET AND STRIP, 18CR - 9.0NI (SAE 30302), COLD ROLLED, FULL HARD, 185 KSI (1276 MPA) TENSILE STRENGTH |
| SAE AMS 5859 : 2012 | STEEL, CORROSION RESISTANT, SHEET, STRIP, AND PLATE, 15CR - 6.5NI - 0.75MO - 0.30CB - 1.5CU, CONSUMABLE ELECTRODE MELTED, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
| SAE AMS7728J : 2000(2017) | IRON-NICKEL-COBALT ALLOY, SHEET, STRIP, AND PLATE, 53FE - 29NI - 17CO, LOW EXPANSION GLASS SEALING, ANNEALED |
| SAE AMS 5661 : 2012 | NICKEL-IRON ALLOY, CORROSION AND HEAT RESISTANT, BARS, FORGINGS, AND RINGS - 42.5NI - 12.5CR - 5.8MO - 2.9TI - 0.015B - 35FE - CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED SOLUTION, STABILIZATION, AND PRECIPITATION HEAT TREATED |
| SAE AMS 5616 : 2014 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS 13CR - 2.0NI - 3.0W ANNEALED |
| SAE AMS 5896 : 2015 | STEEL, CORROSION AND HEAT-RESISTANT, SEAMLESS OR WELDED HYDRAULIC TUBING, 18.5CR - 10.5NI - 0.55TI (321), SOLUTION HEAT TREATED AND COLD DRAWN, 1/8 HARD TEMPER |
| SAE AMS 5901B:2008 | STEEL, CORROSION-RESISTANT, SHEET, STRIP, AND PLATE, 18CR - 8NI (SAE 30301), SOLUTION HEAT TREATED |
| SAE AMS5554G:2016 | STEEL, CORROSION AND HEAT-RESISTANT, SEAMLESS TUBING, 16.5CR - 4.5NI - 2.9MO - 0.10N, ANNEALED |
| SAE AMS 5950 : 2014 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, SHEET AND STRIP 52.5NI - 19CR - 3.0MO - 5.0CB - 0.90TI - 0.50AL - 18FE VACUUM INDUCTION AND CONSUMABLE ELECTRODE MELTED SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
| SAE AMS 5717 : 2014 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS 45.5NI - 25.5CR - 3.2CO - 3.2MO - 3.2W - 18.5FE SOLUTION HEAT TREATED |
| SAE AMS 5918 : 2011 | COBALT ALLOY, CORROSION AND HEAT RESISTANT, BARS, 62CO - 28CR - 6MO, WARM-WORKED |
| SAE AMS 5714 : 2018 | ALLOY BARS, FORGINGS, AND RINGS, CORROSION AND HEAT-RESISTANT, 73NI - 15.5CR - 2.5TI - 0.70AL - 7.0FE, PRECIPITATION-HARDENABLE |
| SAE AMS 5676 : 2011 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 80NI - 20CR |
| SAE AMS 5585 : 2016 | ALLOY, CORROSION AND HEAT RESISTANT, WELDED TUBING, 32FE - 21CR - 20NI - 20CO - 3MO - 2.5W - 1.0CB (NB) - 0.15N, SOLUTION HEAT TREATED |
| SAE AMS 5718E : 2016 | STEEL, BARS, FORGINGS, TUBING, AND RINGS, CORROSION RESISTANT, 11.8CR - 2.5NI - 1.8MO - 0.33V (0.08 - 0.15C), ANNEALED |
| SAE AMS 5686 : 2012 | STEEL, CORROSION RESISTANT, RIVET WIRE, 18CR - 11.5NI (SAE 30305), SOLUTION HEAT TREATED |
| SAE AMS 5512 : 2012 | STEEL, CORROSION AND HEAT-RESISTANT, SHEET, STRIP, AND PLATE, 18CR - 10.5NI - 0.80CB (SAE 30347), SOLUTION HEAT TREATED |
| SAE AMS 5613 : 2013 | STEEL, CORROSION AND HEAT RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS 12.5CR (SAE 51410) ANNEALED |
| SAE AMS 5592 : 2013 | IRON-NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, SHEET, STRIP, AND PLATE, 44FE - 18.5CR - 35NI - 1.15SI, SOLUTION HEAT TREATED |
| SAE AMS 5920 : 2013 | COBALT-NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, ROUND BARS 19CR - 36CO - 25NI - 7.0MO - 0.50CB (NB) - 2.9TI - 0.20AL - 9.0FE VACUUM INDUCTION PLUS VACUUM CONSUMABLE ELECTRODE MELTED SOLUTION HEAT TREATED, WORK STRENGTHENED AND AGED, MODIFIED STRENGTH |
| SAE ARP 1917 : 2002 | CLARIFICATION OF TERMS USED IN AEROSPACE METALS SPECIFICATIONS |
| SAE AMS 2374 : 2016 | QUALITY ASSURANCE SAMPLING AND TESTING CORROSION AND HEAT-RESISTANT STEEL AND ALLOY FORGINGS |
| ASTM E 8/E8M : 2016-09 | TEST METHODS FOR TENSION TESTING OF METALLIC MATERIALS |
US$102.66
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.