ASTM D 5766/D5766M : 2011 : R2018

Name: ASTM D 5766/D5766M : 2011 : R2018
Brand: ASTM
Price: 75.00 USD

Superseded

View Superseded by

Standard Test Method for Open-Hole Tensile Strength of Polymer Matrix Composite Laminates

Available format(s)

Hardcopy , PDF

Superseded date

10-18-2023

Language(s)

English

Published date

07-17-2018

Publisher

American Society for Testing and Materials

1.1This test method determines the open-hole tensile strength of multidirectional polymer matrix composite laminates reinforced by high-modulus fibers. The composite material forms are limited to continuous-fiber or discontinuous-fiber (tape or fabric, or both) reinforced composites in which the laminate is balanced and symmetric with respect to the test direction. The range of acceptable test laminates and thicknesses are described in 8.2.1.

1.2The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

1.2.1Within the text the inch-pound units are shown in brackets.

1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee	D 30
DocumentType	Test Method
Pages	7
PublisherName	American Society for Testing and Materials
Status	Superseded
SupersededBy	ASTM D 5766/D5766M : 2023
Supersedes	ASTM D 5766/D5766M : 2011

ASTM D 4762 : 2018	Standard Guide for Testing Polymer Matrix Composite Materials
ASTM D 7615/D7615M : 2019	Standard Practice for Open-Hole Fatigue Response of Polymer Matrix Composite Laminates
ASTM D 8387/D8387M : 2021	Standard Test Method for High Bypass – Low Bearing Interaction Response of Polymer Matrix Composite Laminates
ASTM D 8509/D8509M : 2023	Standard Guide for Test Method Selection and Test Specimen Design for Bolted Joint Related Properties
ASTM D 7248/D7248M : 2021	Standard Test Method for High Bearing - Low Bypass Interaction Response of Polymer Matrix Composite Laminates Using 2-Fastener Specimens
ASTM D 6742/D6742M : 2017	Standard Practice for Filled-Hole Tension and Compression Testing of Polymer Matrix Composite Laminates
ASTM D 6856/D6856M : 2003 : R2016	Standard Guide for Testing Fabric-Reinforced “Textile” Composite Materials
ASTM C 1869 : 2018 : R2023	Standard Test Method for Open-Hole Tensile Strength of Fiber-Reinforced Advanced Ceramic Composites

ASTM D 3171 : 1999	Standard Test Methods for Constituent Content of Composite Materials
ASTM E 177 : 1990 : REV A : R1996	Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
ASTM E 456 : 2002	Standard Terminology for Relating to Quality and Statistics
ASTM D 3878 : 2023	Standard Terminology for Composite Materials
ASTM E 456 : 2013 : REV A : R2022	Standard Terminology Relating to Quality and Statistics
ASTM D 3878 : 2015	Standard Terminology for Composite Materials
ASTM D 3878 : 2019	Standard Terminology for Composite Materials
ASTM D 883 : 2022	Standard Terminology Relating to Plastics
ASTM D 883 : 2020 : REV B	Standard Terminology Relating to Plastics
ASTM E 6 : 2002	Standard Terminology Relating to Methods of Mechanical Testing
ASTM E 691 : 2020	Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM D 2734 : 2016	Standard Test Methods for Void Content of Reinforced Plastics
ASTM E 456 : 2013 : REV A : R2017 : EDT 5	Standard Terminology Relating to Quality and Statistics
ASTM E 691 : 2019 : EDT 1	Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E 691 : 2023	Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM D 3878 : 2016	Standard Terminology for Composite Materials
ASTM E 1309 : 2000	Standard Guide for Identification of Fiber-Reinforced Polymer-Matrix Composite Materials in Databases
ASTM D 3878 : 2019 : REV A	Standard Terminology for Composite Materials
ASTM D 3878 : 1998	Standard Terminology Composite Materials
ASTM D 3171 : 2022	Standard Test Methods for Constituent Content of Composite Materials
ASTM D 3878 : 2018	Standard Terminology for Composite Materials
ASTM E 691 : 2022	Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E 1434 : 2000	Standard Guide for Recording Mechanical Test Data of Fiber-Reinforced Composite Materials in Databases
ASTM E 691 : 2009	Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E 6 : 2015 : EDT 3	Standard Terminology Relating to Methods of Mechanical Testing
ASTM D 3878 : 2020 : REV B	Standard Terminology for Composite Materials
ASTM D 2584 : 1968	Standard Method Of Test For Ignition Loss Of Cured Reinforced Resins
ASTM E 6 : 2023 : REV A	Standard Terminology Relating to Methods of Mechanical Testing
ASTM E 691 : 2021	Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM D 2734 : 1994	Standard Test Methods for Void Content of Reinforced Plastics
ASTM E 6 : 2015 : EDT 4 : REDLINE	Standard Terminology Relating to Methods of Mechanical Testing
ASTM E 6 : 2015 : EDT 4	Standard Terminology Relating to Methods of Mechanical Testing
ASTM D 3171 : 2015	Standard Test Methods for Constituent Content of Composite Materials
ASTM E 6 : 2023	Standard Terminology Relating to Methods of Mechanical Testing
ASTM E 456 : 2013 : REV A : R2017 : EDT 4	Standard Terminology Relating to Quality and Statistics
ASTM E 456 : 2013 : REV A : R2017 : EDT 6	Standard Terminology Relating to Quality and Statistics
ASTM D 3878 : 2001	Standard Terminology Composite Materials