Standard Practice for Sampling Asphalt Mixtures

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

11-07-2022

Publisher

American Society for Testing and Materials

1.1This practice covers sampling of asphalt mixtures at points of manufacture, storage, delivery, or in place.

1.2The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the standard.

1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee	D 04
DocumentType	Standard Practice
Pages	4
PublisherName	American Society for Testing and Materials
Status	Current
Supersedes	ASTM D 979/D979M : 2015

ASTM D 7063/D7063M : 2018	Standard Test Method for Effective Porosity and Effective Air Voids of Compacted Asphalt Mixture Samples
ASTM D 6857/D6857M : 2018	Standard Test Method for Maximum Specific Gravity and Density of Asphalt Mixtures Using Automatic Vacuum Sealing Method
ASTM D 2172/D2172M : 2017 : EDT 1	Standard Test Methods for Quantitative Extraction of Asphalt Binder from Asphalt Mixtures
ASTM D 7196 : 2018	Standard Test Method for Raveling Test of Cold-Mixed Emulsified Asphalt Samples
ASTM D 2041/D2041M : 2019	Standard Test Method for Theoretical Maximum Specific Gravity and Density of Asphalt Mixtures
ASTM D 3625/D3625M : 2020	Standard Practice for Effect of Water on Asphalt-Coated Aggregate Using Boiling Water
ASTM D 7870/D7870M : 2020	Standard Practice for Moisture Conditioning Compacted Asphalt Mixture Specimens by Using Hydrostatic Pore Pressure
ASTM D 6307 : 2019	Standard Test Method for Asphalt Content of Asphalt Mixture by Ignition Method
ASTM D 4125/D4125M : 2021	Standard Test Methods for Asphalt Content of Asphalt Mixtures by the Nuclear Method
ASTM D 2726/D2726M : 2021	Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Asphalt Mixtures
ASTM D 4215 : 2021	Standard Specification for Cold-Mixed, Cold-Laid Asphalt Paving Mixtures
ASTM D 8237 : 2021	Standard Test Method for Determining Fatigue Failure of Asphalt-Aggregate Mixtures with the Four-Point Beam Fatigue Device
ASTM D 1188/D1188M : 2022	Standard Test Method for Bulk Specific Gravity and Density of Compacted Asphalt Mixtures Using Coated Samples
ASTM D 8360 : 2022	Standard Test Method for Determination of Rutting Tolerance Index of Asphalt Mixture Using the Ideal Rutting Test
ASTM D 1461 : 2017 : R2022	Standard Test Method for Moisture or Volatile Distillates in Asphalt Mixtures
ASTM D 6925 : 2015	Standard Test Method for Preparation and Determination of the Relative Density of Asphalt Mix Specimens by Means of the Superpave Gyratory Compactor
ASTM D 8044 : 2016	Standard Test Method for Evaluation of Asphalt Mixture Cracking Resistance using the Semi-Circular Bend Test (SCB) at Intermediate Temperatures
ASTM D 8079 : 2016	Standard Practice for Preparation of Compacted Slab Asphalt Mix Samples Using a Segmented Rolling Compactor
ASTM D 6925 : 2023	Standard Test Method for Preparation and Determination of the Relative Density of Asphalt Mix Specimens by Means of the Superpave Gyratory Compactor
ASTM D 8303 : 2020	Standard Test Method for Determining Thermal Cracking Properties of Asphalt Mixtures Through Measurement of Thermally Induced Stress and Strain
ASTM D 4867/D4867M : 2022	Standard Test Method for Effect of Moisture on Asphalt Mixtures
ASTM D 7196 : 2023	Standard Test Method for Raveling Test of Cold-Mixed Emulsified Asphalt Samples
ASTM D 8044 : 2023	Standard Test Method for Evaluation of Asphalt Mixture Cracking Resistance Using the Semi-Circular Bend Test (SCB) at Intermediate Temperatures
ASTM D 6627/D6627M : 2022	Standard Test Method for Determination of a Volatile Distillate Fraction of Cold Asphalt Mixtures
ASTM D 6390 : 2023	Standard Test Method for Determination of Draindown Characteristics in Uncompacted Asphalt Mixtures
ASTM D 8458 : 2022	Standard Test Method for Evaluation of Fatigue Performance of Asphalt Mixtures Using the Three-Point Bending Cylinder (3PBC) Test
ASTM D 6857/D6857M : 2023	Standard Test Method for Maximum Specific Gravity and Density of Asphalt Mixtures Using Automatic Vacuum Sealing Method
ASTM D 8541 : 2023	Standard Test Method for Determination of Relative Rotation to Evaluate the Workability of Asphalt Mixture Using Wireless Particle-Size Sensors

ASTM D 5444 : 2023	Standard Test Method for Mechanical Size Analysis of Extracted Aggregate
ASTM D 6925 : 2023	Standard Test Method for Preparation and Determination of the Relative Density of Asphalt Mix Specimens by Means of the Superpave Gyratory Compactor
ASTM D 3665 : 2012 : R2017	Standard Practice for Random Sampling of Construction Materials
ASTM D 5361/D5361M : 2016	Standard Practice for Sampling Compacted Asphalt Mixtures for Laboratory Testing
ASTM D 2041/D2041M : 2011	Standard Test Method for Theoretical Maximum Specific Gravity and Density of Bituminous Paving Mixtures
ASTM D 5444 : 2015	Standard Test Method for Mechanical Size Analysis of Extracted Aggregate
ASTM D 5361/D5361M : 2016 : R2022	Standard Practice for Sampling Compacted Asphalt Mixtures for Laboratory Testing
ASTM D 2726/D2726M : 2014	Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures
ASTM E 141 : 2010 : R2023	Standard Practice for Acceptance of Evidence Based on the Results of Probability Sampling
ASTM D 2726/D2726M : 2019	Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Asphalt Mixtures
ASTM E 141 : 2010 : R2018	Standard Practice for Acceptance of Evidence Based on the Results of Probability Sampling