ASTM F 1511 : 2018
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Standard Specification for Mechanical Seals for Shipboard Pump Applications
Available format(s)
Hardcopy , PDF
Superseded date
06-09-2023
Language(s)
English
Published date
04-17-2018
1.1This specification covers mechanical end-face seals for centrifugal and positive displacement pumps for shipboard use.
1.2The following types of seals are not included in this specification: lip seals, oil seals, circumferential seals, or labyrinth seals.
1.3The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. A companion hard metric standard is in the process of preparation.
1.4Special requirements for U.S. Navy Shipboard Pump Applications are included in Supplement S1.
1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| Committee |
F 25
|
| DocumentType |
Standard
|
| Pages |
26
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| ASTM F 2363/F2363M : 2017 : R2023 | Standard Specification for Sewage and Graywater Flow Through Treatment Systems |
| ASTM F 1510 : 2007 : R2013 | Standard Specification for Rotary Positive Displacement Pumps, Ships Use |
| ASTM F 998 : 2012 : R2018 | Standard Specification for Centrifugal Pump, Shipboard Use |
| ASTM F 1718 : 2001 : R2019 | Standard Specification for Rotary Positive Displacement Distillate Fuel Pumps |
| ASTM F 2283 : 2012 : R2018 | Standard Specification for Shipboard Oil Pollution Abatement System |
| ASTM F 1510 : 2021 | Standard Specification for Rotary Positive Displacement Pumps, Ships Use |
| ASTM F 998 : 2012 : R2022 | Standard Specification for Centrifugal Pump, Shipboard Use |
| ASTM F 2363/F2363M : 2017 | Standard Specification for Sewage and Graywater Flow Through Treatment Systems |
| ASTM A 693 : 2022 | Standard Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip |
| ASTM A 182/A182M : 2021 | Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service |
| ASTM B 584 : 2014 | Standard Specification for Copper Alloy Sand Castings for General Applications |
| ASTM D 1418 : 2010 : REV A : R2016 | Standard Practice for Rubber and Rubber Latices—Nomenclature |
| ASTM A 564/A564M : 2019 : REV A | Standard Specification for Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes |
| ASTM A 182/A182M : 2011 | Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service |
| ASTM A 240/A240M : 2011 | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
| ASTM D 3951 : 1998 | Standard Practice for Commercial Packaging |
| ASTM B 584 : 2022 | Standard Specification for Copper Alloy Sand Castings for General Applications |
| ASTM B 348 : 2005 : EDT 1 | Standard Specification for Titanium and Titanium Alloy Bars and Billets |
| ASTM D 1141 : 1998 : R2021 | Standard Practice for Preparation of Substitute Ocean Water |
| ASTM D 1418 : 1999 | Standard Practice for Rubber and Rubber Latices-Nomenclature |
| ASTM D 1141 : 1998 : EDT 1 | Standard Practice for the Preparation of Substitute Ocean Water |
| ASTM A 240/A240M : 2005 | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
| ASTM A 693 : 2016 | Standard Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip |
| ASTM D 3294 : 2015 | Standard Specification for Polytetrafluoroethylene (PTFE) Resin Molded Sheet and Molded Basic Shapes |
| ASTM A 494/A494M : 2018 : REV A | Standard Specification for Castings, Nickel and Nickel Alloy |
| ASTM B 505/B505M : 2022 | Standard Specification for Copper Alloy Continuous Castings |
| ASTM D 3951 : 2015 | Standard Practice for Commercial Packaging |
| ASTM B 367 : 2022 | Standard Specification for Titanium and Titanium Alloy Castings |
| ASTM D 3294 : 2022 | Standard Specification for Polytetrafluoroethylene (PTFE) Resin Molded Sheet and Molded Basic Shapes |
| ASTM D 3951 : 2018 | Standard Practice for Commercial Packaging |
| ASTM D 1418 : 2017 | Standard Practice for Rubber and Rubber Latices—Nomenclature |
| ASTM A 182/A182M : 2020 | Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service |
| ASTM A 240/A240M : 2022 : REV B | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
| ASTM A 744/A744M : 2021 | Standard Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service |
| ASTM B 338 : 2017 : R2021 | Standard Specification for Seamless and Welded Titanium and Titanium Alloy Tubes for Condensers and Heat Exchangers |
| ASTM B 338 : 2017 : EDT 1 | Standard Specification for Seamless and Welded Titanium and Titanium Alloy Tubes for Condensers and Heat Exchangers |
| ASTM D 1141 : 1998 : R2013 | Standard Practice for the Preparation of Substitute Ocean Water |
| ASTM A 693 : 2016 : R2022 | Standard Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip |
| ASTM B 62 : 1993 | Standard Specification for Composition Bronze or Ounce Metal Castings (Withdrawn 2002) |
| ASTM A 240/A240M : 2022 | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
| ASTM B 670 : 1995 | Standard Specification for Precipitation-Hardening Nickel Alloy (UNS N07718) Plate, Sheet, and Strip for High-Temperature Service |
| ASTM A 744/A744M : 2020 : REV A | Standard Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service |
| ASTM D 1418 : 2021 : REV A | Standard Practice for Rubber and Rubber Latices—Nomenclature |
| ASTM A 182/A182M : 2023 | Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service |
| ASTM A 182/A182M : 2022 | Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service |
| ASTM B 473 : 1996 | Standard Specification for UNS N08020, UNS N08024, and UNS N08026 Nickel Alloy Bar and Wire |
| ASTM A 744/A744M : 2021 : REV A | Standard Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service |
| ASTM D 3294 : 1997 | Standard Specification for PTFE Resin Molded Sheet and Molded Basic Shapes |
| ASTM A 744/A744M : 1998 | Standard Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service |
| ASTM B 584 : 2014 : R2022 | Standard Specification for Copper Alloy Sand Castings for General Applications |
| ASTM A 494/A494M : 2022 | Standard Specification for Castings, Nickel and Nickel Alloy |
| ASTM B 505/B505M : 2005 | Standard Specification for Copper-Base Alloy Continuous Castings |
| ASTM A 240/A240M : 2022 : REV A | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
| ASTM A 240/A240M : 2020 : REV A | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
| ASTM A 182/A182M : 2022 : REV A | Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service |
| ASTM A 182/A182M : 2001 : REV A | Standard Specification for Forged or Rolled Alloy-Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service |
| ASTM D 1418 : 2022 | Standard Practice for Rubber and Rubber Latices—Nomenclature |
| ASTM B 168 : 2019 | Standard Specification for Nickel-Chromium-Aluminum Alloys (UNS N06699), Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696), Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674), and Nickel-Chromium-Molybdenum-Copper Alloy (UNS N06235) Plate, Sheet, and Strip |
| ASTM B 505/B505M : 2018 | Standard Specification for Copper Alloy Continuous Castings |
| ASTM B 367 : 2013 : R2017 | Standard Specification for Titanium and Titanium Alloy Castings |
| ASTM D 1418 : 2021 | Standard Practice for Rubber and Rubber Latices—Nomenclature |
| ASTM B 168 : 2019 : EDT 1 | Standard Specification for Nickel-Chromium-Aluminum Alloys (UNS N06699), Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696), Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674), and Nickel-Chromium-Molybdenum-Copper Alloy (UNS N06235) Plate, Sheet, and Strip |
US$108.00
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
Hardcopy - English
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.