BS 1210:1963
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Specification for wood screws
Hardcopy , PDF
07-01-2014
English
07-04-1963
Co-operating organizations
Foreword
Specification
1 Scope
2 Material
3 Dimensions
4 Tolerance on length
5 Threads
6 Standard sizes
7 Finish
8 Designation for ordering
Tables
Slotted head
1 Slotted countersunk head wood screws
1M Metric equivalents of table 1
Standard sizes of slotted countersunk head wood screws
2 Steel
3 Brass
4 Stainless steel
5 Aluminium
6 Silicon bronze
7 Nickel-copper alloy
8 Slotted round head wood screws
8M Metric equivalents of Table 8
Standard sizes of slotted round head wood screws
9 Steel
10 Brass
11 Stainless steel
12 Aluminium
13 Silicon bronze
14 Slotted raised countersunk head wood screws
14M Metric equivalents of Table 14
Standard sizes of slotted raised countersunk head wood
screws
15 Steel
16 Brass
17 Stainless steel
18 Aluminium
19 Silicon bronze
Recessed head
20 Recessed countersunk head wood screws
20M Metric equivalents of Table 20
Standard sizes of recessed countersunk head wood screws
21 Steel
22 Brass
23 Recessed round head wood screws
23M Metric equivalents of Table 23
Standard sizes of recessed round head wood screws
24 Steel
25 Brass
26 Recessed raised countersunk head wood screws
26M Metric equivalents of Table 26
Standard sizes of recessed raised countersunk head wood
screws
27 Steel
28 Brass
Appendices
A Finishes for wood screws
B Recess penetration gauging
C Metric slot widths
Materials, dimensions, tolerances, designation criteria for screws of steel, stainless steel, brass, aluminium, silicon bronze, nickel copper alloy. Suitable finishes. Preferred and supplementary sizes for countersunk head, round head and raised countersunk head screws, for both slotted and recessed head types. Recess penetration gauging appended.
| Committee |
FME/9
|
| DevelopmentNote |
Inactive for the new design. (12/2011)
|
| DocumentType |
Standard
|
| Pages |
40
|
| PublisherName |
British Standards Institution
|
| Status |
Withdrawn
|
| Supersedes |
| DEFSTAN 81-5/6(1997) : 1997 | CRATES, WOOD |
| DEFSTAN 81-14/6(2004) : 2004 | CASES, WOOD (BATTEN AND BOARD CONSTRUCTION) |
| DEFSTAN 81-14/7(2012) : 2012 | CASES, WOOD (BATTEN AND BOARD CONSTRUCTION) |
| BS 7371-7:1994 | Coatings on metal fasteners Specification for mechanically applied zinc coatings |
| DEFSTAN 81-73/3(2007) : 2007 | GUIDE ON USE OF CAPTIVE FASTENERS |
| DEFSTAN 81-135/2(2007) : 2007 | CASES, WOOD, PACKING (BOARD OR PANEL AND BATTEN CONSTRUCTION) |
| DEFSTAN 81-14/5(1997) : 1997 | CASES, WOOD (BATTEN AND BOARD CONSTRUCTION) |
| DEFSTAN 81-29/3(1999) : 1999 | HANDLES, WEBBING OR ROPE, WITH METAL BRACKETS OR WOOD BLOCKS FOR USE ON CONTAINERS |
| BS 7371-8:1998 | Coatings on metal fasteners Specification for sherardized coatings |
| DEFSTAN 81-3/10(2015) : 2015 | CASES, WOOD (COMB-JOINTED CONSTRUCTION) |
| DEFSTAN 81-3/9(2010) : 2010 | CASES, WOOD (COMB-JOINTED CONSTRUCTION) |
| DEFSTAN 81-055/7(2017) : 2017 | PACKAGING OF MECHANICAL COMPONENTS & ITEMS |
| DEFSTAN 81-71/5(2015) : 2015 | CASES, WOOD, PACKING, REUSABLE |
| DEFSTAN 81-041(PT5)/8(2017) : 2017 | PACKAGING OF DEFENCE MATERIEL - PART 5: PACKAGING PROCESSES |
| BS 7371-7:2010 | Coatings on metal fasteners Specification for mechanically applied zinc and zinc based coatings |
| DEFSTAN 81-71/3(2000) : 2000 | CASES, WOOD, PACKING, REUSABLE |
| DEFSTAN 81-41(PT5)/7(2014) : 2014 | PACKAGING OF DEFENCE MATERIEL - PART 5 - PACKAGING PROCESSES |
| DEFSTAN 81-41(PT5)/6(2008) : 2008 | PACKAGING OF DEFENCE MATERIEL - PART 5: PACKAGING PROCESSES |
| DEFSTAN 81-63/4(2014) : 2014 | PACKAGING OF FUEL INJECTION PUMPS AND FUEL INJECTORS |
| DEFSTAN 81-5/7(2005) : 2005 | CRATES, WOOD |
| DEFSTAN 81-073/4(2016) : 2016 | GUIDE ON USE OF CAPTIVE FASTENERS |
| DEFSTAN 81-131/1(1996) : 1996 | PACKAGING INFORMATION USED FOR LOGISTIC SUPPORT ANALYSIS RECORDS |
| DEFSTAN 81-3/7(1997) : 1997 | CASES, WOOD (COMB-JOINTED CONSTRUCTION) |
| DEFSTAN 81-61/2(2002) : 2002 | PACKAGING OF VEHICLE TYPE RADIATORS AND HEAT EXCHANGERS |
| DEFSTAN 81-63/2(2003) : 2003 | PACKAGING OF FUEL INJECTION PUMPS AND FUEL INJECTORS |
| DEFSTAN 81-5/8(2014) : 2014 | CRATES, WOOD |
| DEFSTAN 81-61/4(2016) : 2016 | PRESERVATION AND PACKAGING OF VEHICLE TYPE RADIATORS AND HEAT EXCHANGERS |
| DEFSTAN 81-14/8(2013) : 2013 | CASES, WOOD (BATTEN AND BOARD CONSTRUCTION) |
| BS 7371-6(1998) : 1998 | COATINGS ON METAL FASTENERS - PART 6: SPECIFICATION FOR HOT DIPPED GALVANIZED COATINGS |
| DEFSTAN 81-41(PT2)/8(2015) : 2015 | PACKAGING OF DEFENCE MATERIEL - PART 2: DESIGN |
| DEFSTAN 81-086/4(2017) : 2017 | FITTINGS METAL AND HANDLES FOR CONTAINERS |
| DEFSTAN 81-61/3(2008) : 2008 | PRESERVATION AND PACKAGING OF VEHICLE TYPE RADIATORS AND HEAT EXCHANGERS |
| DEFSTAN 81-41(PT4)/7(2013) : 2013 | PACKAGING OF DEFENCE MATERIEL - PART 4: SERVICE PACKAGING INSTRUCTION SHEET (SPIS) |
| DEFSTAN 81-41(PT2)/7(2014) : 2014 | PACKAGING OF DEFENCE MATERIEL - PART 2: DESIGN |
| DEFSTAN 81-29/5(2014) : 2014 | HANDLES, WEBBING OR ROPE, WITH METAL BRACKETS OR WOOD BLOCKS FOR USE ON CONTAINERS |
| DEFSTAN 81-061/5(2017) : 2017 | PRESERVATION OF AUTOMOTIVE AND SIMILAR ITEMS |
| DEFSTAN 81-59/2(2002) : 2002 | PACKAGING OF CRANKSHAFTS AND ASSOCIATED BEARINGS |
| DEFSTAN 81-63/3(2009) : 2009 | PACKAGING OF FUEL INJECTION PUMPS AND FUEL INJECTORS |
| DEFSTAN 81-29/4(2007) : 2007 | HANDLES, WEBBING OR ROPE, WITH METAL BRACKETS OR WOOD BLOCKS FOR USE ON CONTAINERS |
| DEFSTAN 81-12/8(2014) : 2014 | CASES, WOOD (PANEL AND BATTEN CONSTRUCTION) |
| DEFSTAN 81-41(PT5)/5(2002) : 2002 | PACKAGING OF DEFENCE MATERIEL - PART 5: PRODUCTION PROCESSES |
| DEFSTAN 81-41(PT4)/8(2015) : 2015 | PACKAGING OF DEFENCE MATERIEL - PART 4: SERVICE PACKAGING INSTRUCTION SHEET (SPIS) |
| DEFSTAN 81-3/8(2004) : 2004 | CASES, WOOD (COMB-JOINTED CONSTRUCTION) |
| DEFSTAN 81-003/11(2017) : 2017 | CASES, WOOD |
| BS 7371-8:2011 | Coatings on metal fasteners Specification for sherardized coatings |
| DEFSTAN 81-041(PT2)/9(2017) : 2017 | PACKAGING OF DEFENCE MATERIEL - PART 2: DESIGN |
| DEFSTAN 81-41(PT5)/4(1999) : 99 AMD 1 00 | PACKAGING OF DEFENCE MATERIEL - PART 5: PRODUCTION PROCESSES |
| BS 1722-10:1999 | Fences Specification for anti-intruder fences in chain link and welded mesh |
| BS 4046:1991 | Specification for compressed straw building slabs |
| BS 1567:1953 | Specification for wood door frames and linings |
| BS 1129:1990 | Specification for portable timber ladders, steps, trestles and lightweight stagings |
| BS 7371-3:1993 | Coatings on metal fasteners Specification for electroplated zinc and cadmium coatings |
| BS 6915(2001) : 2001 | DESIGN AND CONSTRUCTION OF FULLY SUPPORTED LEAD SHEET ROOF AND WALL COVERINGS - CODE OF PRACTICE |
| BS 8103-3:1996 | Structural design of low-rise buildings Code of practice for timber floors and roofs for housing |
| BS 3251:1976 | Specification. Indicator plates for fire hydrants and emergency water supplies |
| BS 5385-2:2015 | Wall and floor tiling Design and installation of external ceramic, natural stone and mosaic wall tiling in normal conditions. Code of practice |
| BS 1722-1:1999 | Fences Specification for chain link fences |
| BS 1363-4(1995) : 1995 | 13 A PLUGS, SOCKET-OUTLETS, ADAPTORS AND CONNECTION UNITS - PART 4: SPECIFICATION FOR 13 A FUSED CONNECTION UNITS SWITCHED AND UNSWITCHED |
| BS 1722-1:2006 | Fences Specification for chain link fences |
| BS 5385-2:1991 | Wall and floor tiling Code of practice for the design and installation of external ceramic wall tiling and mosaics (including terra cotta and faience tiles) |
| BS 8201:1987 | Code of practice for flooring of timber, timber products and wood based panel products |
| BS 5268-2:2002 | STRUCTURAL USE OF TIMBER - PART 2: CODE OF PRACTICE FOR PERMISSIBLE STRESS DESIGN, MATERIALS AND WORKMANSHIP |
| BS 6312-2.2:1997 | Connectors for analogue telecommunication interfaces Sockets for use with plugs specified in BS 6312-1 - Particular requirements for fixed socket-outlets used in permanent wiring installations |
| BS 1363-2(1995) : 1995 | 13 A PLUGS, SOCKET-OUTLETS, ADAPTORS AND CONNECTION UNITS - PART 2: SPECIFICATION FOR 13 A SWITCHED AND UNSWITCHED SOCKET-OUTLETS |
| BS 1765-2:1976 | Specification for hospital bedside lockers General purpose lockers of wooden construction with facilities for hanging day clothes |
| BS 6349-1:2000 | Maritime structures Code of practice for general criteria |
| BS 1765-1:1990 | Hospital bedside lockers. Specification for general purpose bedside lockers for patients |
| BS 1892-1:1986 | Gymnasium equipment Specification of general requirements |
| BS 5268-2:1996 | Structural use of timber Code of practice for permissible stress design, materials and workmanship |
| BS 7371-9:1996 | Coatings on metal fasteners Specification for phosphate or phosphate and oil coatings |
| BS MA 37:1973 | Specification for external doors (wood) for ships |
| BS 6605:1990 | Specification for cross recesses for screws |
| BS 5061:1974 | Specification for cylindrical forage tower silos and recommendations for their use |
| BS 7371-3:2009 | Coatings on metal fasteners Specifications for electroplated zinc coatings |
| BS 7371-10:1994 | Coatings on metal fasteners Specification for organic coatings |
| BS 8103-3:2009 | Structural design of low-rise buildings Code of practice for timber floors and roofs for housing |
| BS 8201:2011 | Code of practice for installation of flooring of wood and wood-based panels |
| BS 5385-2:2006 | Wall and floor tiling Design and installation of external ceramic and mosaic wall tiling in normal conditions. Code of practice |
| BS 7371-11:1993 | Coatings on metal fasteners Specification for zinc flake non-electrolytically applied cured coatings |
| BS 7371-4:1994 | Coatings on metal fasteners Specification for electroplated nickel, nickel/chromium and copper/nickel/chromium coatings |
| BS 1224:1970 | Specification for electroplated coatings of nickel and chromium |
| BS 1706:1990 | Method for specifying electroplated coatings of zinc and cadmium on iron and steel |
| BS 3075:1976 | Specification for nickel and nickel alloys: wire |
| BS 1448(1948) : LATEST | NOMENCLATURE OF DECORATIVE METALLIC FINISHES |
| BS 2873:1969 | Specification for copper and copper alloys. Wire |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.