BS 1470:1987
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Specification for wrought aluminium and aluminium alloys for general engineering purposes: plate, sheet and strip
Hardcopy , PDF
04-15-1995
English
01-30-1987
Foreword
Committees responsible
Specification
1 Scope
2 Definitions
3 General requirements
4 Chemical composition
5 Tempers
6 Mechanical properties
7 Tolerances on dimensions
8 Freedom from defects
9 Selection of test samples
10 Test methods
11 Retests
12 Certificate of conformity
Appendices
A Information to be supplied by the purchaser
B Details of the international alloy designations and
chemical composition limits for wrought aluminium
alloys
C Alloy and temper designation cross-references
D Temper designation system
E The rounding of numbers rule
Tables
1 Chemical composition limits and mechanical
properties of unalloyed aluminium plate, sheet and
strip
2 Chemical composition limits and mechanical
properties of aluminium alloy plate, sheet and
strip (non-heat-treatable)
3 Chemical composition limits and mechanical
properties of aluminium alloy plate, sheet and
strip (heat-treatable)
4 Thickness tolerances for hot and cold rolled plate,
sheet and strip
5 Width tolerances for hot and cold rolled plate and
sheet
6 Width tolerances for coiled strip
7 Length tolerances for hot and cold rolled plate and
sheet
8 Squareness tolerances for plate and sheet
9 Lateral curvature tolerances for plate and sheet
10 Flatness tolerances (transverse arch and
longitudinal arch)
11 Alloy and temper designation cross-references
Figures
1 Lateral curvature of plate or sheet of length L
2 Transverse arch
3 Longitudinal arch
4 Buckles
5 Edge waves
Chemical composition, mechanical properties, dimensional tolerances, selection of test samples and test methods for three grades of unalloyed aluminium and 10 aluminium alloys in various tempers and conditions.
| Committee |
NFE/35
|
| DevelopmentNote |
Replaces BS 4300/6: 1969, BS 4300/7: 1969 and BS 4300/8: 1969.
|
| DocumentType |
Standard
|
| Pages |
24
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| ISO 6361-1:2011 | Similar to |
| ISO 6361-2:2014 | Similar to |
| ISO 6361-3:2014 | Similar to |
| ISO 6361-4:2014 | Similar to |
| ISO 209-1:1989 | Similar to |
| ISO 209-2:1989 | Similar to |
| UNE 38334:2003 | Identical |
| UNE 38340:2016 | Identical |
| UNE 38347:2004 | Identical |
| UNE 38383:2004 | Identical |
| UNE 38384:2004 | Identical |
| UNE 38422:2004 | Identical |
| DEFSTAN 61-14(PT7)/1(1990) : 1990 | PRECISION INSTRUMENT, ROTATING, SERVOCOMPONENTS - PART 7: INSTALLATION CONVENTIONS |
| DEFSTAN 68-222/1(1993) : 1993 | |
| DEFSTAN 61-14(PT5)/1(1985) : 1985 | PRECISION INSTRUMENT, ROTATING, SERVO-COMPONENTS - PART 5: MOTORS, STEPPING, D.C. |
| DEFSTAN 80-194/1(1994) : 1994 | ACRYLIC (THERMOPLASTIC) MEDIA FOR PAINT REMOVAL |
| DEFSTAN 61-14(PT2)/2(1990) : 1990 | PRECISION INSTRUMENT, ROTATING, SERVOCOMPONENTS - PART 2: MOTORS, CONTROL AC (SERVOMOTORS, TWO-PHASE INDUCTION) |
| DEFSTAN 61-14(PT1)/2(1990) : 1990 | PRECISION INSTRUMENT, ROTATING, SERVOCOMPONENTS - PART 1: GENERAL REQUIREMENTS AND COMMON TESTS FOR SERVOCOMPONENTS |
| DEFSTAN 05-34/2(1984) : 1984 | MARKING OF SERVICE MATERIAL |
| DEFSTAN 61-14(PT9)/1(1988) : 1988 | PRECISION INSTRUMENT, ROTATING, SERVOCOMPONENTS - PART 9: MOTORS, TORQUE, D.C. |
| DEFSTAN 61-14(PT10)/1(1989) : 1989 | PRECISION INSTRUMENT, ROTATING, SERVO-COMPONENTS - PART 10: GEARHEADS |
| DEFSTAN 02-706/1(2000) : 2000 | WELDING AND FABRICATION OF SHIP'S STRUCTURE |
| BS 1133-10.1:1990 | Packaging code. Metal containers Tins and cans |
| BS 4868:1972 | Specification for profiled aluminium sheet for building |
| BS 6651:1999 | Code of practice for protection of structures against lightning |
| BS 5885-1:1988 | Automatic gas burners Specification for burners with input rating 60 kW and above |
| BS 2037:1994 | Specification for portable aluminium ladders, steps, trestles and lightweight stagings |
| BS 2574-1:1991 | Lower limb orthoses Guide to the design and manufacture of lower limb orthoses, excluding foot orthoses |
| BS 5041-4:1975 | Fire hydrant systems equipment Specification for boxes for landing valves for dry risers |
| BS 715:1993 | Specification for metal flue pipes, fittings, terminals and accessories for gas-fired appliances with a rated input not exceeding 60 kW |
| BS 2X 27:1991 | Specification for cellulose finishing scheme for aerospace purposes |
| BS AU 210-2:1994 | Drawbars for caravans and light trailers Specification for the design of aluminium drawbars and chassis |
| BS 7805-1:1995 | Swaged collar grooved rivets Specification for sizes up to and including 10 mm diameter |
| BS 1133-21:1991 | Packaging code Regenerated cellulose film, films made of plastics, aluminium foil, flexible multilayer structures and metallized materials |
| BS 8297:1995 | Code of practice for design and installation of non-loadbearing precast concrete cladding |
| BS 6779-3:1994 | Highway parapets for bridges and other structures Specification for vehicle containment parapets of combined metal and concrete construction |
| BS 5386-3:1980 | Specification for gas burning appliances Domestic cooking appliances burning gas |
| BS 4592-2:1987 | Industrial type flooring, walkways and stair treads Specification for expanded metal grating panels |
| BS 1494-1:1964 | Specification for fixing accessories for building purposes Fixings for sheet, roof and wall coverings |
| BS 8290-2:1991 | Suspended ceilings Specification for performance of components and assemblies |
| BS 873-7:1984 | Road traffic signs and internally illuminated bollards Specification for posts and fittings |
| BS 5445-8:1984 | Components of automatic fire detection systems Specification for high temperature heat detectors |
| BS 7777-2:1993 | Flat-bottomed, vertical, cylindrical storage tanks for low temperature service Specification for the design and construction of single, double and full containment metal tanks for the storage of liquefied gas at temperatures down to -165°C |
| BS 5609:1986 | Specification for printed pressure-sensitive, adhesive-coated labels for marine use, including requirements for label base material |
| BS 7818:1995 | Specification for pedestrian restraint systems in metal |
| BS 1474:1987 | Specification for wrought aluminium and aluminium alloys for general engineering purposes: bars, extruded round tubes and sections |
| BS 4076:1989 | Specification for steel chimneys |
| BS 2646-1:1993 | Autoclaves for sterilization in laboratories Specification for design, construction, safety and performance |
| BS 336:1989 | Specification for fire hose couplings and ancillary equipment |
| BS 5974:1990 | Code of practice for temporarily installed suspended scaffolds and access equipment |
| BS 4376-1:1991 | Electrically operated blood storage refrigerators Specification for closed reach-in types |
| BS 1615:1987 | Method for specifying anodic oxidation coatings on aluminium and its alloys |
| BS 4L 100:1993 | Procedure for inspection, testing and acceptance of wrought aluminium and aluminium alloys |
| BS 4842:1984 | Specification for liquid organic coatings for application to aluminium alloy extrusions, sheet and preformed sections for external architectural purposes, and for the finish on aluminium alloy extrusions, sheet and preformed sections coated with liquid organic coatings |
| BS 4592-3:1987 | Industrial type flooring, walkways and stair treads Specification for cold formed planks |
| BS 3712-4:1991 | Building and construction sealants Method of test for adhesion in peel |
| BS 5395-1:1977 | Stairs, ladders and walkways Code of practice for the design of straight stairs |
| BS 6180:1982 | Code of practice for protective barriers in and about buildings |
| BS 4592-5:1995 | Industrial type flooring, walkways and stair treads Specification for solid plates in steel, aluminium and glass reinforced plastics |
| PD 5500:2000 | SPECIFICATION FOR UNFIRED FUSION WELDED PRESSURE VESSELS |
| BS 4872-2:1976 | Specification for approval testing of welders when welding procedure approval is not required TIG or MIG welding of aluminium and its alloys |
| BS 7805-2:1997 | Swaged collar grooved rivets Specification for sizes from 12.7 mm up to and including 34.9 mm |
| BS 5188:1990 | Specification for non-refillable metallic containers up to 1.4 litres capacity and 85 mm diameter for liquefied or compressed non-flammable gases |
| BS 8298:1994 | Code of practice for design and installation of natural stone cladding and lining |
| BS 3250-2:1994 | Methods for thermal testing of domestic solid mineral fuel burning appliances with convection Methods for thermal testing of domestic solid mineral fuel burning appliances with convection. Hood method |
| BS 7541:1992 | Specification for temporary protectives for the protection of metal surfaces against corrosion during transport and storage |
| BS 7258-1:1994 | Laboratory fume cupboards Specification for safety and performance |
| BS 1473:1972 | Specification for wrought aluminium and aluminium alloys for general engineering purposes - rivet, bolt and screw stock |
| BS 3914:1991 | Specification for non-refillable metal aerosol dispensers of 50 ml to 1400 ml capacity and up to 85 mm diameter |
| BS 5041-5:1974 | Fire hydrant systems equipment Specification for boxes for foam inlets and dry riser inlets |
| BS 5350-A2:1990 | Methods of test for adhesives. Adherends Guide to the selection of adherend materials |
| BS 6496:1984 | Specification for powder organic coatings for application and stoving to aluminium alloy extrusions, sheet and preformed sections for external architectural purposes, and for the finish on aluminium alloy extrusions, sheet and preformed sections coated with powder organic coatings |
| BS 8118-1:1991 | STRUCTURAL USE OF ALUMINUM - CODE OF PRACTICE FOR DESIGN |
| PD 6702-1:2009 | Structural use of aluminium Recommendations for the design of aluminium structures to BS EN 1999 |
| ISO 6361-4:2014 | Wrought aluminium and aluminium alloys Sheets, strips and plates Part 4: Sheets and plates: Tolerances on shape and dimensions |
| ISO 2107:2007 | Aluminium and aluminium alloys — Wrought products — Temper designations |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.