BS 6779-1:1998
Current
The latest, up-to-date edition.
Highway parapets for bridges and other structures Specification for vehicle containment parapets of metal construction
Hardcopy , PDF
English
03-21-2003
Foreword
Introduction
1 Scope
2 References
3 Definitions
4 Symbols
5 Designation of vehicle parapets
6 General design
7 Materials
8 Additional design requirements for parapets for particular
applications
9 Construction
10 Performance
Annex A (informative) Guidance on levels of containment and
derivation of theoretical design forces
Annex B (informative) Detailed design recommendations for new
designs of post and rail configurations
Annex C (informative) Information to be provided by the
supplier/purchaser
Annex D (normative) Method for dynamic testing
Annex E (normative) Static testing of posts
Annex F Annex deleted
List of references
Defines requirements for design, materials, construction including storage, transport and installation, and testing of vehicle containment parapets of metal construction not less than 12 m long, mounted on plinths not in excess of 100 mm high, for provision of specified levels of containment for vehicles on highways.
Committee |
B/509/1
|
DevelopmentNote |
Supersedes BS 6779-1(1992), 96/102247 DC. (04/2003) Reviewed and confirmed by BSI, April 2007. (03/2007)
|
DocumentType |
Standard
|
Pages |
74
|
PublisherName |
British Standards Institution
|
Status |
Current
|
SupersededBy |
BS 5493:1977 | Code of practice for protective coating of iron and steel structures against corrosion |
BS EN 288-4:1992 | Specification and approval of welding procedures for metallic materials Welding procedure tests for the arc welding of aluminium and its alloys |
BS 8118-2(1991) : 1991 | STRUCTURAL USE OF ALUMINIUM - PART 2: SPECIFICATION FOR MATERIALS, WORKMANSHIP AND PROTECTION |
BS 6443:1984 | Method for penetrant flaw detection |
BS EN 10131:2006 | Cold rolled uncoated and zinc or zinc-nickel electrolytically coated low carbon and high yield strength steel flat products for cold forming. Tolerances on dimensions and shape |
BS 8118-1:1991 | STRUCTURAL USE OF ALUMINUM - CODE OF PRACTICE FOR DESIGN |
BS 5400-6:1980 | Steel, concrete and composite bridges Specification for materials and workmanship, steel |
BS EN 287-1:2011 | Qualification test of welders. Fusion welding Steels |
BS EN 24018:1992 | Hexagon head screws. Product grade C |
BS 4483:1985 | Specification for steel fabric for the reinforcement of concrete |
BS EN 288-2:1992 | Specification and approval of welding procedures for metallic materials Welding procedures specification for arc welding |
BS EN 24035:1992 | Hexagon thin nuts (chamfered). Product grades A and B |
BS 4395-1:1969 | Specification for high strength friction grip bolts and associated nuts and washers for structural engineering General grade |
BS EN 287-2:1992 | Approval testing of welders for fusion welding Aluminium and aluminium alloys |
BS 6579-5:1986 | Safety fences and barriers for highways Specification for open box beam safety fence (single height) |
BS 5135:1984 | Specification for arc welding of carbon and carbon manganese steels |
BS EN 10025:1993 | Hot rolled products of non-alloy structural steels. Technical delivery conditions |
BS 6579-3:1988 | Safety fences and barriers for highways Specification for components for tensioned rectangular hollow section beam (100 mm x 100 mm) safety fence |
BS 6744:1986 | Specification for austenitic stainless steel bars for the reinforcement of concrete |
BS EN 20898-2:1994 | Mechanical properties of fasteners Nuts with specified proof load values. Coarse thread |
BS 3571-1:1985 | MIG welding Specification for MIG welding of aluminium and aluminium alloys |
BS EN 970:1997 | Non-destructive examination of fusion welds. Visual examination |
BS 7475:1991 | Specification for fusion welding of austenitic stainless steels |
BS EN 10051:2010 | Continuously hot-rolled strip and plate/sheet cut from wide strip of non-alloy and alloy steels. Tolerances on dimensions and shape |
BS EN 10210-1:2006 | Hot finished structural hollow sections of non-alloy and fine grain steels Technical delivery requirements |
BS 6579-6:1988 | Safety fences and barriers for highways Specification for components for open box beam safety fence (double height) |
BS EN 24034:1992 | Hexagon nuts. Product grade C |
BS EN 10130:2006 | Cold rolled low carbon steel flat products for cold forming. Technical delivery conditions |
BS 1387:1985 | Specification for screwed and socketed steel tubes and tubulars and for plain end steel tubes suitable for welding or for screwing to BS 21 pipe threads |
BS 5400-2:1978 | Steel, concrete and composite bridges Specification for loads |
BS 5400-3:1982 | Steel, concrete and composite bridges Code of practice for design of steel bridges |
BS 6579-4:1990 | Safety fences and barriers for highways Specification for components for tensioned rectangular hollow section beam (200 mm x 100 mm) safety fence |
BS 6072:1981 | Method for magnetic particle flaw detection |
BS EN 20898-1:1992 | Mechanical properties of fasteners Bolts, screws and studs |
BS 6579-7:1989 | Safety fences and barriers for highways Specification for components for untensioned corrugated beam safety fence |
BS EN 288-3:1992 | Specification and approval of welding procedures for metallic materials Welding procedure tests for the arc welding of steels |
BS 7818:1995 | Specification for pedestrian restraint systems in metal |
BS 1490:1988 | Specification for aluminium and aluminium alloy ingots and castings for general engineering purposes |
BS 4464:1969 | Specification for spring washers for general engineering and automobile purposes. Metric series |
BS 4300-1(1967) : 1967 | WROUGHT ALUMINIUM AND ALUMINIUM ALLOYS FOR GENERAL ENGINEERING PURPOSES (SUPPLEMENTARY SERIES) - ALUMINIUM ALLOY LONGITUDINALLY WELDED TUBE |
BS EN 10083-2:2006 | Steels for quenching and tempering Technical delivery conditions for non alloy steels |
BS EN 10034:1993 | Structural steel I and H sections. Tolerances on shape and dimensions |
BS EN 24032:1992 | Hexagon nuts, style 1. Product grades A and B |
BS 4848-4:1972 | Hot-rolled structural steel sections Equal and unequal angles |
BS EN 485-1 : 2008 | ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
BS 3019-1:1984 | TIG welding Specification for TIG welding of aluminium, magnesium and their alloys |
BS EN 10083-1:2006 | Steels for quenching and tempering General technical delivery conditions |
BS 6779-2:1991 | Highway parapets for bridges and other structures Specification for vehicle containment parapets of concrete construction |
BS 6579-1:1988 | Safety fences and barriers for highways Specification for components for tensioned corrugated beam safety fence on Z posts |
BS EN 10056-2:1993 | Specification for structural steel equal and unequal angles Tolerances on shape and dimensions |
BS EN 10002-1:2001 | Tensile testing of metallic materials Method of test at ambient temperature |
BS 4320:1968 | Specification for metal washers for general engineering purposes. Metric series |
BS EN 288-1:1992 | Specification and approval of welding procedures for metallic materials General rules for fusion welding |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.