CSA PLUS 2203 : 2001
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
HAZARDOUS LOCATIONS - GUIDE FOR THE DESIGN, TESTING, CONSTRUCTION, AND INSTALLATION OF EQUIPMENT IN EXPLOSIVE ATMOSPHERES
Hardcopy , PDF
06-01-2011
English
01-12-2013
CHAPTER I
PRINCIPLES OF AREA CLASSIFICATION
Historical background - Definition - Classes and divisions
in North America - International zones for gases and vapours -
Principles of area classification for gases and vapours -
Principles of area classification for dusts, fibres, and
flyings - Groups of gases, vapours and dusts
CHAPTER 2
AREA CLASSIFICATION APPLICATIONS
Legal responsibility - Code references - American
petroleum institute (API) - American gas association (AGA)-
National fire protection association (NFPA) - International
electrotechnical commission (IEC) - Underground coal mines -
Coast guard regulations - International marine organization
(IMO)
CHAPTER 3
EXPLOSION-PROOF ENCLOSURES
History and principle of operation - Flat or straight
flameproof joints - Flat flameproof joints - Other types
of joints - Protection of joints - Windows and transparent
parts of enclosures - Enclosure design - Special fasteners -
Breathers and drains - Entries - Testing explosion-proof
enclosures
CHAPTER 4
EXPLOSION-PROOF INSTALLATIONS
Conduit-connected systems - Sealing of conduits - Pouring
seals - Cable-connected systems - Flexible connections -
Flexible cords and cables - Factory sealed devices -
Installation of explosion-proof devices - Maintenance
CHAPTER 5
DUST-TIGHT ENCLOSURES
History and principle operation - Duel-rated enclosures -
Enclosure requirements - International standards - Divisions,
Zones and groups - Temperature requirements - Marking
requirements
CHAPTER 6
DUST-TIGHT INSTALLATIONS
Conduit-connected systems - Sealing of conduits - Cable-
connected systems - Installation of dust-tight equipment -
Maintenance of dust-tight installations
CHAPTER 7
INTRINSIC SAFETY
History and principle of operation - Testing devices for
intrinsic safety - Published ignition curves - Fault analysis
of intrinsically safe circuits - Zener barriers - The entity
concept - Control drawings - Standards for intrinsic safety -
Risk analysis
CHAPTER 8
INTRINSIC SAFETY INSTALLATIONS
Wiring methods - Grounding of barriers - Entity concept -
Cable requirements - Portable equipment - Maintenance -
Repair
CHAPTER 9
PURGED AND PRESSURIZED ENCLOSURES
Principle of operation - Pressurizing by blower - Compressed
air systems - Protective measures - Class II and Class III
locations - Pressurized rooms - Continuous dilution -
Analyzer houses - Coal storage silos - Self-unloading
coal-carrying ships - Gas turbines - Maintenance and repair
CHAPTER 10
INCREASED SAFETY
Background - Principle of operation - Special provisions -
Advantages of increased safety - Hybrid devices - Maintenance
- Repair - Risk analysis
CHAPTER 11
EXCLUSION OF EXPLOSIVE MIXTURES
Principle of operation - Powder-filling - Oil-immersion -
Encapsulation - Maintenance and repair
CHAPTER 12
COMBUSTIBLE GAS DETECTION EQUIPMENT
History - Canadian standards association (CSA) - Combustible
gas detection equipment - Principle of operation - Testing
procedures - Applications - Installation - Calibration and
maintenance
CHAPTER 13
CLASS I, DIVISION 2 (ZONE 2) EQUIPMENT
History - Non-incendive circuit - Enclosed break device -
Non-incendive component - Hermetically sealed device -
Sealed device - Fuses and fuseholders - plugs and sockets -
Lighting fixtures (luminaires) - Restricted breathing
enclosures - Pressurization - Rotating machines - Wiring
methods
CHAPTER 14
FLAME ARRESTERS
Principle of operation - Types of flame arresters - Flat
plate arrester - Loose-fitting threads - Crimped ribbon
flame arresters - Sintered metal flame arresters - Metal
foam elements - Pressed metal wire elements - Baffle plate
flame arresters - Wire mesh flame arresters - Expanded
metal flame arresters - Testing of flame arresters
CHAPTER 15
ELECTRIC VEHICLES
History - North American requirements - European
requirements - Requirements for mining vehicles - Maintenance
CHAPTER 16
FLAMEPROOF DIESEL VEHICLES
History and principles of operation - Flameproof
requirements - Other requirements - Exhaust emissions -
Maintenance
CHAPTER 17
STANDARDS-WRITING BODIES
National Standards bodies - European community standards -
International Standards-writing bodies - Marine standards-
writing bodies
CHAPTER 18
CERTIFYING AUTHORITIES
Requirements - Australia - Canada - Europe - United States Of
America - International certification
CHAPTER 19
CERTIFIED REPAIR FACILITIES
Introduction - Canadian explosive atmospheres laboratory -
Canadian Standards association - Certification division -
Factory mutual research corporation - Underwriters
laboratories Inc.
APPENDIX A
Hazardous locations standards
APPENDIX B
Canadian inspection authorities
APPENDIX C
Glossary
Index
Contains the most up to date information on Hazardous Locations including the Canadian Electrical Code-Part I, the U.S. National Electrical Code, the ATEX directive of the European Community and the International Standards in this field. Also includes new sections on field bus intrinsic safety, fibre optics and fuel cells.
| DocumentType |
Standard
|
| Pages |
155
|
| PublisherName |
Canadian Standards Association
|
| Status |
Withdrawn
|
| CSA E335.2.20 : 1994 | SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - PARTICULAR REQUIREMENTS FOR BATTERY POWERED TOOTH BRUSHES AND THEIR CHARGING AND BATTERY ASSEMBLIES |
| CSA E730.2.3 : 1994 | AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2: PARTICULAR REQUIREMENTS FOR THERMAL PROTECTORS FOR BALLASTS FOR TUBULAR FLUORESCENT LAMPS |
| CSA E335.2.71 : 1995 | SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - PARTICULAR REQUIREMENTS FOR ELECTRICAL HEATING APPLIANCES FOR BREEDING AND REARING ANIMALS |
| CSA E730.1 : 0 | AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - GENERAL REQUIREMENTS |
| CSA E742 : 1994 | ISOLATING TRANSFORMERS AND SAFETY ISOLATING TRANSFORMERS - REQUIREMENTS |
| CSA E79.18 : 1995 | ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - ENCAPSULATION "M" |
| CSA E1029.2.1 : 1994 | SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 2-1: PARTICULAR REQUIREMENTS FOR CIRCULAR SAWS |
| CSA E335.2.24 : 1994 | SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - PART 2: PARTICULAR REQUIREMENTS FOR REFRIGERATORS, FOOD-FREEZERS AND ICE-MAKERS |
| CSA E335.1-2E : 1994 | SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - PART 1: GENERAL REQUIREMENTS |
| CSA E730.2.7 : 1994 | AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2: PARTICULAR REQUIREMENTS FOR TIMERS AND TIME SWITCHES |
| CSA E1029.2.6 : 1994 : R2013 | SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 2: PARTICULAR REQUIREMENTS FOR DIAMOND DRILLS WITH WATER SUPPLY |
| CAN/CSA-E1029-2-6-94 (R2017) | Safety of Transportable Motor-Operated Electric Tools - Part 2: Particular Requirements for Diamond Drills With Water Supply (Adopted IEC 1029-2-6:1993, first edition) | Sécurité des machines-outils électriques semi-fixes - Partie 2: Règles particulières pour les foreuses à béton (norme CEI 1029-2-6:1993 adoptée, première édition) |
| CAN/CSA-E1029-1-94 (R2017) | Safety of Transportable Motor-Operated Electric Tools - Part 1: General Requirements (Adopted IEC 1029-1:1990, first edition, with Canadian deviations) | Sécurité des machines-outils électriques semi-fixes - Partie 1: Règles générales (norme CEI 1029-1:1990 adoptée, première édition, avec exigences propres au Canada) |
| CSA E61241.1.1 : 2002 : R2010 | ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 1-1: ELECTRICAL APPARATUS PROTECTED BY ENCLOSURES AND SURFACE TEMPERATURE LIMITATION - SPECIFICATION FOR APPARATUS |
| CSA E335.2.5 : 1994 | SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - PART 2: PARTICULAR REQUIREMENTS FOR DISHWASHERS |
| CSA E335.2.15 : 1994 | SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - PART 2: PARTICULAR REQUIREMENTS FOR APPLIANCES FOR HEATING LIQUIDS |
| CSA E1029.2.3 : 1994 : INC : AMD 1 : 2006 : R2013 | SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 2-3: PARTICULAR REQUIREMENTS FOR PLANERS AND THICKNESSERS |
| CSA E335.2.2 : 1994 | SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - PART 2: PARTICULAR REQUIREMENTS FOR VACUUM CLEANERS AND WATER SUCTION CLEANING APPLIANCES |
| CSA E967 : 1994 | SAFETY OF ELECTRICALLY HEATED BLANKETS, PADS AND SIMILAR FLEXIBLE HEATING APPLIANCES FOR HOUSEHOLD USE |
| CSA E335.2.55 : 1994 | SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - PART 2: PARTICULAR REQUIREMENTS FOR ELECTRICAL APPLIANCES FOR USE WITH AQUARIUMS AND GARDEN PONDS |
| CSA E335.2.4 : 1994 | SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - PARTICULAR REQUIREMENTS FOR SPIN EXTRACTORS |
| CSA E730.2.10 : 1994 | AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2: PARTICULAR REQUIREMENTS FOR ELECTRICALLY OPERATED MOTOR STARTING RELAYS |
| CSA E335.2.65 : 1995 | SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - PARTICULAR REQUIREMENTS FOR AIR-CLEANING APPLIANCES |
| CSA E335.2.19 : 1994 | SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - PARTICULAR REQUIREMENTS FOR BATTERY POWERED SHAVERS, HAIR CLIPPERS AND SIMILAR APPLIANCES AND THEIR CHARGING AND BATTERY ASSEMBLIES |
| CSA E1029.2.4 : 1994 : INC : AMD 1 : 2006 : R2013 | SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 2-4: PARTICULAR REQUIREMENTS FOR BENCH GRINDERS |
| CSA E730.2.12 : 1994 | AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2: PARTICULAR REQUIREMENTS FOR ELECTRICALLY OPERATED DOOR LOCKS |
| CSA E335.2.57 : 1994 : R2004 | SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - PART 2: PARTICULAR REQUIREMENTS FOR ICE CREAM APPLIANCES WITH INCORPORATED MOTOR COMPRESSORS |
| CSA E730.2.12 : 1994 : INC : AMD 1 : 2001 | AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2: PARTICULAR REQUIREMENTS FOR ELECTRICALLY OPERATED DOOR LOCKS |
| CSA E1029.1 : 1994 : R2013 | SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 1: GENERAL REQUIREMENTS |
| CSA E730.2.12 : 1994 : R2013 | AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2: PARTICULAR REQUIREMENTS FOR ELECTRICALLY OPERATED DOOR LOCKS |
| CSA E1029.2.1 : 1994 : INC : AMD 2 : 2006 : R2013 | SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 2-1: PARTICULAR REQUIREMENTS FOR CIRCULAR SAWS |
| CSA E730.2.6 : 1994 | AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2: PARTICULAR REQUIREMENTS FOR AUTOMATIC ELECTRICAL PRESSURE SENSING CONTROLS INCLUDING MECHANICAL REQUIREMENTS |
| C22.1-15 PACKAGE | Consists of C22.1-15, Canadian electrical code, part I (23rd edition), safety standard for electrical installations; C22.1HB-15, Canadian electrical code handbook - an explanation of rules of the Canadian electrical code, part I and the 2015 Electrical quick reference |
| CSA E730.2.1 : 1994 | AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2: PARTICULAR REQUIREMENTS FOR ELECTRICAL CONTROLS FOR ELECTRICAL HOUSEHOLD APPLIANCES |
| CSA E79.6 : 0 | ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - OIL-IMMERSED APPARATUS |
| C22.1HB-18 | Canadian Electrical Code Handbook - An Explanation of the Rules of the Canadian Electrical Code, Part I |
| CSA E335.2.33 : 1994 | SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - PART 2: PARTICULAR REQUIREMENTS FOR COFFEE MILLS AND COFFEE GRINDERS |
| CSA E335.1-3E : 1994 | SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - PART 1: GENERAL REQUIREMENTS |
| CSA E335.2.14 : 1994 | SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - PART 2: PARTICULAR REQUIREMENTS FOR ELECTRIC KITCHEN MACHINES |
| CSA E491 : 1994 | SAFETY REQUIREMENTS FOR ELECTRONIC FLASH APPARATUS FOR PHOTOGRAPHIC PURPOSES |
| CSA E335.2.61 : 1995 | SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - PARTICULAR REQUIREMENTS FOR THERMAL STORAGE HEATERS |
| CSA E1029.2.2 : 1994 | SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 2: PARTICULAR REQUIREMENTS FOR RADIAL ARM SAWS |
| CSA E691 : 0 | THERMAL LINKS - REQUIREMENTS AND APPLICATION GUIDE |
| CSA E1029.2.3 : 1994 : INC : AMD 1 : 2006 : R2017 | Amendment 1:2006 to CAN/CSA-E1029-2-3-94, Safety of Transportable Motor-Operated Electric Tools - Part 2-3: Particular Requirements for Planers and Thicknessers (Adopted Amendment 1:2001 to CEI/IEC 1029-2-3:1993) |
| CSA E1029.2.7 : 1994 : R2013 | SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 2: PARTICULAR REQUIREMENTS FOR DIAMOND SAWS WITH WATER SUPPLY |
| CAN/CSA-E1029-2-2-94 (R2017) | Safety of Transportable Motor-Operated Electric Tools - Part 2: Particular Requirements for Radial Arm Saws (Adopted IEC 1029-2-2:1993, first edition)| Sécurité des machines-outils électriques semi-fixes - Partie 2: Règles particulières pour les scies radiales (norme CEI 1029-2-2:1993 adoptée, première édition) |
| CSA E1029.2.2 : 1994 : R2013 | SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 2: PARTICULAR REQUIREMENTS FOR RADIAL ARM SAWS |
| CSA E335.2.70 : 95(R2004) | SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - PART 2: PARTICULAR REQUIREMENTS FOR MILKING MACHINES |
| CSA E335.2.63 : 1994 | SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - PART 2: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC WATER BOILERS AND LIQUID HEATERS |
| API 14F : 2008 : R2013 | DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, DIVISION 1 AND DIVISION 2 LOCATIONS |
| CSA E335.2.18 : 1994 | SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - GUIDE FOR PREPARING SAFETY REQUIREMENTS FOR BATTERY POWERED MOTOR OPERATED APPLIANCES AND THEIR CHARGING BATTERY ASSEMBLIES |
| CSA E335.2.53 : 1994 | SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - PART 2: PARTICULAR REQUIREMENTS FOR ELECTRIC SAUNA HEATING APPLIANCES |
| CSA E342.1 : 1995 | SAFETY REQUIREMENTS FOR ELECTRIC FANS AND REGULATORS - PART 1: FANS AND REGULATORS FOR HOUSEHOLD AND SIMILAR PURPOSES |
| CSA E335.2.13 : 1994 | SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - PART 2: PARTICULAR REQUIREMENTS FOR DEEP FAT FRYERS, FRYING PANS AND SIMILAR APPLIANCES |
| CSA E257 : 0 | FUSEHOLDERS FOR MINIATURE CARTRIDGE FUSE-LINKS |
| CSA E335.2.3 : 1994 : R2004 | SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - PART 2: PARTICULAR REQUIREMENTS FOR ELECTRIC IRONS |
| CSA E1029.2.5 : 1994 : INC : AMD 1 : 2006 : R2017 | SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 2-5: PARTICULAR REQUIREMENTS FOR BAND SAWS |
| CSA E1029.2.4 : 1994 : INC : AMD 1 : 2006 : R2017 | SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 2-4: PARTICULAR REQUIREMENTS FOR BENCH GRINDERS |
| CSA E335.2.12 : 1994 : R2004 | SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - PART 2: PARTICULAR REQUIREMENTS FOR WARMING PLATES AND SIMILAR APPLIANCES |
| CSA E335.2.10 : 1994 | SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - PART 2: PARTICULAR REQUIREMENTS FOR FLOOR TREATMENT MACHINES AND WET SCRUBBING MACHINES |
| CSA E730.2.2 : 1994 | AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2: PARTICULAR REQUIREMENTS FOR THERMAL MOTOR PROTECTORS |
| CSA E335.2.5 : 1994 : R2004 | SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - PART 2: PARTICULAR REQUIREMENTS FOR DISHWASHERS |
| CSA E1029.2.5 : 1994 : R2013 | SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 2-5: PARTICULAR REQUIREMENTS FOR BAND SAWS |
| CSA E61241.1.1 : 2002 | ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 1-1: ELECTRICAL APPARATUS PROTECTED BY ENCLOSURES AND SURFACE TEMPERATURE LIMITATION - SPECIFICATION FOR APPARATUS |
| API 14F:2008 | DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, DIVISION 1 AND DIVISION 2 LOCATIONS |
| CSA E730.2.4 : 1994 | AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PARTICULAR REQUIREMENTS FOR THERMAL MOTOR PROTECTORS FOR MOTOR COMPRESSORS OF HERMETIC AND SEMI HERMETIC TYPE |
| CSA E335.2.9 : 0 | SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - PARTICULAR REQUIREMENTS FOR TOASTERS, GRILLS, ROASTERS AND SIMILAR APPLIANCES |
| CSA E730.2.5 : 1994 | AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2: PARTICULAR REQUIREMENTS FOR AUTOMATIC ELECTRICAL BURNER CONTROL SYSTEMS |
| CSA E335.2.31 : 1994 | SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - PART 2: PARTICULAR REQUIREMENTS FOR RANGE HOODS |
| CSA E335.2.59 : 1994 | SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - PART 2: PARTICULAR REQUIREMENTS FOR INSECT KILLERS |
| CSA E335.2.10 : 1994 : R2004 | SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - PART 2: PARTICULAR REQUIREMENTS FOR FLOOR TREATMENT MACHINES AND WET SCRUBBING MACHINES |
| CSA E335.2.12 : 1994 | SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - PART 2: PARTICULAR REQUIREMENTS FOR WARMING PLATES AND SIMILAR APPLIANCES |
| CSA E1029.2.1 : 1994 : INC : AMD 2 : 2006 : R2017 | SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 2-1: PARTICULAR REQUIREMENTS FOR CIRCULAR SAWS |
| CSA E730.2.12 : 1994 : INC : AMD 1 : 2001 : R2013 | AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2: PARTICULAR REQUIREMENTS FOR ELECTRICALLY OPERATED DOOR LOCKS |
| CAN/CSA-E1029-2-7-94 (R2017) | Safety of Transportable Motor-Operated Electric Tools - Part 2: Particular Requirements for Diamond Saws With Water Supply (Adopted IEC 1029-2-7:1993, first edition) | Sécurité des machines-outils électriques semi-fixes - Partie 2: Règles particulières pour les tronçonneuses à béton (norme CEI 1029-2-7:1993 adoptée, première édition) |
| CSA E335.2.57 : 1994 | SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - PART 2: PARTICULAR REQUIREMENTS FOR ICE CREAM APPLIANCES WITH INCORPORATED MOTOR COMPRESSORS |
| CSA E335.2.3 : 1994 | SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - PART 2: PARTICULAR REQUIREMENTS FOR ELECTRIC IRONS |
| CSA E335.2.23 : 1994 | SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - PART 2: PARTICULAR REQUIREMENTS FOR APPLIANCES FOR SKIN OR HAIR CARE |
| CSA E335.2.66 : 1995 | SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - PARTICULAR REQUIREMENTS FOR WATER-BED HEATERS |
| CSA E384.14.1 : 1995 | FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 14: BLANK DETAIL SPECIFICATION: FIXED CAPACITORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION AND CONNECTION TO THE SUPPLY MAINS - ASSESSMENT LEVEL D |
| CSA E60079.1 : 2002 | ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - CONSTRUCTION AND VERIFICATION TEST OF FLAMEPROOF ENCLOSURES OF ELECTRICAL APPARATUS |
| API 14FZ : 2013 | RECOMMENDED PRACTICE FOR DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, ZONE 0, ZONE 1, AND ZONE 2 LOCATIONS |
| API 14F REDLINE : 2008 | DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, DIVISION 1 AND DIVISION 2 LOCATIONS |
| API 500 : 2012 | RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS AT PETROLEUM FACILITIES CLASSIFIED AS CLASS 1, DIVISION 1 AND DIVISION 2 |
| C22.1-18 | Canadian Electrical Code, Part I (24th Edition), Safety Standard for Electrical Installations |
| IEC 60079-1:2014 RLV | Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d" |
| IEC 60079-10:2002 | Electrical apparatus for explosive gas atmospheres - Part 10: Classification of hazardous areas |
| EN 50058:1998 | Electrical apparatus for the detection and measurement of combustible gases - Performance requirements for Group II apparatus indicating up to 100 % (v/v) gas |
| CSA C22.2 No. 157 : 1992 | INTRINSICALLY SAFE AND NON-INCENDIVE EQUIPMENT FOR USE IN HAZARDOUS LOCATIONS |
| API 500 : 2012 | RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS AT PETROLEUM FACILITIES CLASSIFIED AS CLASS 1, DIVISION 1 AND DIVISION 2 |
| CSA C22.2 No. 25 : 1966 | ENCLOSURES FOR USE IN CLASS 2, DIVISION 1, GROUPS E, F, AND G HAZARDOUS LOCATIONS |
| EN 50039:1980 | Electrical apparatus for potentially explosive atmospheres - Intrinsically safe electrical systems 'i' |
| CSA C22.2 No. 138 : 0 | HEAT TRACING CABLE AND CABLE SETS FOR USE IN HAZARDOUS LOCATIONS |
| C22.1-15 | Canadian Electrical Code, Part I (23rd Edition), Safety Standard for Electrical Installations |
| EN 50054:1998 | Electrical apparatus for the detection and measurement of combustible gases - General requirements and test methods |
| IEC 60079-19:2010+AMD1:2015 CSV | Explosive atmospheres - Part 19: Equipment repair, overhaul and reclamation |
| CSA E79.6 : 0 | ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - OIL-IMMERSED APPARATUS |
| IEC 61241-1-1:1999 | Electrical apparatus for use in the presence of combustible dust - Part 1-1: Electrical apparatus protected by enclosures and surface temperature limitation - Specification for apparatus |
| EN 50020:2002 | Electrical apparatus for potentially explosive atmospheres - Intrinsic safety 'i' |
| CSA Z343 : 98(R2002) | TEST METHODS FOR IN-LINE AND FIREBOX FLAME ARRESTERS |
| IEC 60079-17:2013 | Explosive atmospheres - Part 17: Electrical installations inspection and maintenance |
| CSA C22.2 No. 0.4 : 2004(R2013) | BONDING OF ELECTRICAL EQUIPMENT |
| CSA C22.2 No. 0.5 : 2016 | THREADED CONDUIT ENTRIES |
| IEC 60079-18:2014 RLV | Explosive atmospheres - Part 18: Equipment protection by encapsulation “m” |
| EN 50055:1998 | Electrical apparatus for the detection and measurement of combustible gases - Performance requirements for Group I apparatus indicating up to 5 % (v/v) methane in air |
| EN 50017:1998 | Electrical apparatus for potentially explosive atmospheres - Powder filling "q" |
| NFPA 496 : 2017 | PURGED AND PRESSURIZED ENCLOSURES FOR ELECTRICAL EQUIPMENT |
| EN 50019:2000/corrigendum Apr. 2003 | ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - INCREASED SAFETY "E" |
| EN 50018 : 2000 AMD 1 2002 | ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - FLAMEPROOF ENCLOSURE "D" |
| IEC TR 60079-16:1990 | Electrical apparatus for explosive gas atmospheres. Part 16: Artificial ventilation for the protection of analyser(s) houses |
| IEC 60079-5:2015 RLV | Explosive atmospheres - Part 5: Equipment protection by powder filling "q" |
| EN 50057:1998 | Electrical apparatus for the detection and measurement of combustible gases - Performance requirements for Group II apparatus indicating up to 100 % lower explosive limit |
| CSA E60079.0 : 2002 | ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - GENERAL REQUIREMENTS |
| IEC 61241-3:1997 | Electrical apparatus for use in the presence of combustible dust - Part 3: Classification of areas where combustible dust are or may be present |
| ISA 12.00.01 : 2002 | ELECTRICAL APPARATUS FOR USE IN CLASS 1, ZONE 0, 1 AND 2 HAZARDOUS (CLASSIFIED) LOCATIONS - GENERAL REQUIREMENTS |
| EN 50021 : 99 COR 2000 | ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - TYPE OF PROTECTION "N" |
| IEC 60079-11:2011 | Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i" |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| UL 1203:5ED 2013-11 | ExplosionProof and Dust-IgnitionProof Electrical Equipment for Use in Hazardous (Classified) Locations |
| API 505 : 1997 | RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS AT PETROLEUM FACILITIES CLASSIFIED AS CLASS I, ZONE 0, ZONE 1, AND ZONE 2 |
| IEC 60079-6:2015 | Explosive atmospheres - Part 6: Equipment protection by liquid immersion "o" |
| IEC 60079-0:2011 | Explosive atmospheres - Part 0: Equipment - General requirements |
| CSA E79.18 : 1995 | ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - ENCAPSULATION "M" |
| IEC 60079-14:2013 | Explosive atmospheres - Part 14: Electrical installations design, selection and erection |
| IEC 61241-1-2:1999 | Electrical apparatus for use in the presence of combustible dust - Part 1-2: Electrical apparatus protected by enclosures and surface temperature limitation - Selection, installation and maintenance |
| UL 783:6ED 2003-04 | Electric Flashlights and Lanterns for Use in Hazardous (Classified) Locations |
| EN 50015:1998 | Electrical apparatus for potentially explosive atmospheres - Oil immersion "o" |
| CSA E60079.7 : 2003 | ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 7: INCREASED SAFETY "E" |
| IEC TR 60079-12:1978 | Electrical apparatus for explosive gas atmospheres - Part 12:Classification of mixtures of gases of vapours with air accordingto their maximum experimental safe gaps and minimum ignitingcurrents |
| EN 50056:1998 | Electrical apparatus for the detection and measurement of combustible gases - Performance requirements for Group I apparatus indicating up to 100 % (v/v) methane in air |
| EN 50016:2002 | Electrical apparatus for potentially explosive atmospheres - Pressurized apparatus "p" |
| CSA E60079.14 : 2002 | ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - ELECTRICAL INSTALLATIONS IN EXPLOSIVE GAS ATMOSPHERES (OTHER THAN MINES) |
| EN 50028:1987 | Electrical apparatus for potentially explosive atmospheres - Encapsulation 'm' |
| EN 50014:1997/A2:1999 | ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - GENERAL REQUIREMENTS |
| C22.2 NO. 213-17 | Nonincendive electrical equipment for use in Class I and II, Division 2 and Class III, Divisions 1 and 2 hazardous (classified) locations (Binational standard with UL 121201) |
| CSA E60079.1 : 2002 | ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - CONSTRUCTION AND VERIFICATION TEST OF FLAMEPROOF ENCLOSURES OF ELECTRICAL APPARATUS |
| IEC 60079-15:2010 | Explosive atmospheres - Part 15: Equipment protection by type of protection "n" |
| IEC 60079-13:2017 | Explosive atmospheres - Part 13: Equipment protection by pressurized room "p" and artificially ventilated room "v" |
| NFPA 497 : 2017 | CLASSIFICATION OF FLAMMABLE LIQUIDS, GASES, OR VAPORS AND OF HAZARDOUS (CLASSIFIED) LOCATIONS FOR ELECTRICAL INSTALLATIONS IN CHEMICAL PROCESS AREAS |
| CSA DIR 005.3 : 1997 | LIST OF CSA CERTIFIED ELECTRICAL EQUIPMENT FOR USE IN HAZARDOUS LOCATIONS |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.