EN 13071-1:2008/AC:2010
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
STATIONARY WASTE CONTAINERS UP TO 5000 L, TOP LIFTED AND BOTTOM EMPTIED - PART 1: GENERAL REQUIREMENTS
07-17-2019
01-12-2013
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 General requirements
4.1 Design
4.2 Filling aperture height
4.3 Total height
4.4 External surfaces/edges
4.5 Lifting connection position
4.6 Total permissible mass
4.7 Total usable volume
4.8 Waste spillage
5 Test conditions
5.1 General
5.2 Temperature requirements
5.3 Waste density
6 Test methods
6.1 General
6.2 Test methods on empty containers
6.2.1 Stability test
6.2.2 Resistance to interior impacts
6.2.3 Free fall test
6.2.4 Resistance of the roof
6.3 Tests methods on loaded containers
6.3.1 Resistance to exterior impacts
6.3.2 Emptying device/Locking system
6.3.3 Mechanical resistance of the lifting components
6.4 Measurement of the sound level emitted by falling glass
inside the containers
6.5 Corrosion
6.6 Weathering (for thermoplastics only)
6.6.1 Requirement
6.6.2 Procedure
6.7 Sequence of tests
7 Data sheet
8 Marking
9 Test report
Annex A (normative) Weathering tests
Bibliography
Describes requirements of stationary containers, top lifted and bottom emptied, used for collection of solid non-hazardous wastes, with capacity up to 5000 l.
Committee |
TC 183
|
DevelopmentNote |
Together with EN 13071-2, it supersedes EN 13071. (03/2009)
|
DocumentType |
Standard
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
Standards | Relationship |
ONORM EN 13071-1 : 2010 | Identical |
UNI EN 13071-1 : 2008 | Identical |
I.S. EN 13071-1:2008 | Identical |
PN EN 13071-1 : 2008 AC 2010 | Identical |
UNE-EN 13071-1:2008 | Identical |
SN EN 13071-1 : 2008 CORR 2010 | Identical |
NF EN 13071-1 : 2008 | Identical |
NEN EN 13071-1 : 2008 C1 2010 | Identical |
NS EN 13071-1 : 2008 AC 2010 | Identical |
DIN EN 13071-1:2008-10 | Identical |
BS EN 13071-1:2008 | Identical |
NBN EN 13071-1 : 2008 COR 2010 | Identical |
DIN EN 13071-2:2013-12 | STATIONARY WASTE CONTAINERS UP TO 5000 L, TOP LIFTED AND BOTTOM EMPTIED - PART 2: ADDITIONAL REQUIREMENTS FOR UNDERGROUND OR PARTLY UNDERGROUND SYSTEMS |
UNE-EN 1501-5:2012 | Refuse collection vehicles - General requirements and safety requirements - Part 5: Lifting devices for refuse collection vehicles |
EN 1501-5:2011 | Refuse collection vehicles - General requirements and safety requirements - Part 5: Lifting devices for refuse collection vehicles |
EN 12574-1:2017 | Stationary waste containers - Part 1: Containers with a capacity up to 10 000 l with flat or dome lid(s), for trunnion, double trunnion or pocket lifting device - Dimensions and design |
EN 13071-2:2008/AC:2010 | STATIONARY WASTE CONTAINERS UP TO 5000 L, TOP LIFTED AND BOTTOM EMPTIED - PART 2: ADDITIONAL REQUIREMENTS FOR UNDERGROUND OR PARTLY UNDERGROUND SYSTEMS |
BS EN 13071-3:2011 | Stationary waste containers up to 5000 l, top lifted and bottom emptied Recommended lifting connections |
NF EN 13071-3 : 2011 | STATIONARY WASTE CONTAINERS UP TO 5000 L, TOP LIFTED AND BOTTOM EMPTIED - PART 3: RECOMMENDED LIFTING CONNECTIONS |
I.S. EN 12574-1:2017 | STATIONARY WASTE CONTAINERS - PART 1: CONTAINERS WITH A CAPACITY UP TO 10000 L WITH FLAT OR DOME LID(S), FOR TRUNNION, DOUBLE TRUNNION OR POCKET LIFTING DEVICE - DIMENSIONS AND DESIGN |
DIN EN 12574-1:2017-05 | STATIONARY WASTE CONTAINERS - PART 1: CONTAINERS WITH A CAPACITY UP TO 10000 L WITH FLAT OR DOME LID(S), FOR TRUNNION, DOUBLE TRUNNION OR POCKET LIFTING DEVICE - DIMENSIONS AND DESIGN |
UNE-EN 13071-3:2012 | Stationary waste containers up to 5 000 l, top lifted and bottom emptied - Part 3: Recommended lifting connections |
I.S. EN 13071-2:2008 | STATIONARY WASTE CONTAINERS UP TO 5000 L, TOP LIFTED AND BOTTOM EMPTIED - PART 2: ADDITIONAL REQUIREMENTS FOR UNDERGROUND OR PARTLY UNDERGROUND SYSTEMS |
I.S. EN 13071-3:2011 | STATIONARY WASTE CONTAINERS UP TO 5000 L, TOP LIFTED AND BOTTOM EMPTIED - PART 3: RECOMMENDED LIFTING CONNECTIONS |
I.S. EN 1501-5:2011 | REFUSE COLLECTION VEHICLES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 5: LIFTING DEVICES FOR REFUSE COLLECTION VEHICLES |
UNI EN 13071-3 : 2011 | STATIONARY WASTE CONTAINERS UP TO 5000 L, TOP LIFTED AND BOTTOM EMPTIED - PART 3: RECOMMENDED LIFTING CONNECTIONS |
BS EN 12574-1:2017 | Stationary waste containers Containers with a capacity up to 10 000 l with flat or dome lid(s), for trunnion, double trunnion or pocket lifting device. Dimensions and design |
UNI EN 1501-5 : 2011 | REFUSE COLLECTION VEHICLES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 5: LIFTING DEVICES FOR REFUSE COLLECTION VEHICLES |
DIN EN 1501-5:2012-02 | Refuse collection vehicles - General requirements and safety requirements - Part 5: Lifting devices for refuse collection vehicles |
BS EN 1501-5:2011 | Refuse collection vehicles. General requirements and safety requirements Lifting devices for refuse collection vehicles |
12/30258346 DC | BS EN 16403. Waste management. Waste visual elements |
DIN EN 13071-3:2011-12 | STATIONARY WASTE CONTAINERS UP TO 5000 L, TOP LIFTED AND BOTTOM EMPTIED - PART 3: RECOMMENDED LIFTING CONNECTIONS |
10/30212165 DC : 0 | BS EN 13071-3 - STATIONARY WASTE CONTAINERS UP TO 5000 L, TOP LIFTED AND BOTTOM EMPTIED - PART 3: RECOMMENDED LIFTING CONNECTIONS |
BS EN 13071-2 : 2008 | STATIONARY WASTE CONTAINERS UP TO 5000 L, TOP LIFTED AND BOTTOM EMPTIED - PART 2: ADDITIONAL REQUIREMENTS FOR UNDERGROUND OR PARTLY UNDERGROUND SYSTEMS |
UNE-EN 12574-1:2017 | Stationary waste containers - Part 1: Containers with a capacity up to 10 000 l with flat or dome lid(s), for trunnion, double trunnion or pocket lifting device - Dimensions and design |
UNI EN 13071-2 : 2013 | STATIONARY WASTE CONTAINERS UP TO 5000L, TOP LIFTED AND BOTTOM EMPTIED - PART 2: ADDITIONAL REQUIREMENTS FOR UNDERGROUND OR PARTLY UNDERGROUND SYSTEMS |
UNE-EN 13071-2:2008 | Stationary waste containers up to 5 000 l, top lifted and bottom emptied - Part 2: Additional requirements for underground or partly underground systems |
DIN EN 12574-1:2015-08 (Draft) | STATIONARY WASTE CONTAINERS - PART 1: CONTAINERS WITH A CAPACITY UP TO 10000 L WITH FLAT OR DOME LID(S), FOR TRUNNION, DOUBLE TRUNNION OR POCKET LIFTING DEVICE - DIMENSIONS AND DESIGN |
EN 13071-3:2011 | Stationary waste containers up to 5 000 l, top lifted and bottom emptied - Part 3: Recommended lifting connections |
EN ISO 1461:2009 | Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods (ISO 1461:2009) |
EN ISO 2244 : 2002 | PACKAGING - COMPLETE, FILLED TRANSPORT PACKAGES AND UNIT LOADS - HORIZONTAL IMPACT TESTS |
ISO 2244:2000 | Packaging Complete, filled transport packages and unit loads Horizontal impact tests |
ISO 1461:2009 | Hot dip galvanized coatings on fabricated iron and steel articles — Specifications and test methods |
EN ISO 9227:2017 | Corrosion tests in artificial atmospheres - Salt spray tests (ISO 9227:2017) |
ISO 2081:2008 | Metallic and other inorganic coatings Electroplated coatings of zinc with supplementary treatments on iron or steel |
EN 10327:2004 | Continuously hot-dip coated strip and sheet of low carbon steels for cold forming - Technical delivery conditions |
EN 22248 : 1992 | COMPLETE, FILLED TRANSPORT PACKAGES - METHOD FOR DETERMINATION OF RESISTANCE TO VERTICAL IMPACT BY DROPPING (ISO 2248:1985) |
ISO 15442:2012 | Cranes — Safety requirements for loader cranes |
ISO 9227:2017 | Corrosion tests in artificial atmospheres — Salt spray tests |
ISO 4892-2:2013 | Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps |
EN ISO 105-B02:2014 | Textiles - Tests for colour fastness - Part B02: Colour fastness to artificial light: Xenon arc fading lamp test (ISO 105-B02:2014) |
ISO 2248:1985 | Packaging Complete, filled transport packages Vertical impact test by dropping |
ISO 48:2010 | Rubber, vulcanized or thermoplastic Determination of hardness (hardness between 10 IRHD and 100 IRHD) |
EN ISO 4892-2:2013 | Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps (ISO 4892-2:2013) |
ISO 105-B02:2014 | Textiles Tests for colour fastness Part B02: Colour fastness to artificial light: Xenon arc fading lamp test |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.