EN 61753-1:2007
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Fibre optic interconnecting devices and passive components performance standard - Part 1: General and guidance for performance standards
Superseded date
02-09-2022
Published date
11-14-2007
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 Preparation of a performance standard
4.1 Performance standard title
4.2 Tests
4.3 Details
4.4 Requirements
4.5 Sample size
4.6 Sample definition
4.7 Groupings/sequences
4.8 Pass/fail criteria
4.9 Reference product definition
4.10 Performance standard test report
4.11 Environmental aspects
Annex A (normative) - Tests and severities for
performance standards
Annex B (informative) - Test sequencing for
category O
Annex C (informative) - Mixing of products with
different performance category
Annex D (informative) - Performance standard
numbering
Annex E (informative) - Minimum temperature
value in Finland
Annex ZA (normative) - Normative references to
international publications with their
corresponding European publications
Bibliography
IEC 61753-1 deals with performance standards for all passive fibre optic products, including connectors, passive optical components, fibre management systems and closures. It defines those tests and severities which form the performance categories or general operating service environments and identifies those tests which are considered to be product specific.
| Committee |
CLC/TC 86BXA
|
| DevelopmentNote |
Supersedes EN 61753-1-1. (11/2007)
|
| DocumentType |
Standard
|
| PublisherName |
European Committee for Standards - Electrical
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| NEN EN IEC 61753-1 : 2007 | Identical |
| UNE-EN 61753-1:2007 | Identical |
| IEC 61753-1:2007 | Identical |
| CEI EN 61753-1 : 2009 | Identical |
| I.S. EN 61753-1:2007 | Identical |
| NBN EN 61753-1 : 2008 | Identical |
| DIN EN 61753-1:2016-03 (Draft) | Identical |
| NF EN 61753-1 : 2009 | Identical |
| BS EN 61753-1:2007 | Identical |
| PN EN 61753-1 : 2009 | Identical |
| BS EN 61850-8-1:2011 | Identical |
| BS EN 61753-071-2:2014 | Fibre optic interconnecting devices and passive components. Performance standard Non-connectorised single-mode fibre optic 1 x 2 and 2 x 2 spatial switches for category C. Controlled environments |
| CEI EN 61754-24-21 : 2010 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CONNECTOR INTERFACES - PART 24-21: TYPE SC-RJ CONNECTORS WITH PROTECTIVE HOUSINGS BASED ON IEC 61076-3-106, VARIANT 06 |
| CEI EN 50377-8-8 : 2009 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-8: LSH-APC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE CATEGORY U |
| CEI EN 50378-3-1 : 2008 | PASSIVE COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-1: TYPE: 100/200 GHZ DWDM MODULE TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLE MODE FIBRE |
| CEI EN 50377-8-3 : 2008 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-3: LSH-PC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, COMPOSITE FERRULE CATEGORY C |
| CEI EN 50377-8-13 : 2012 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-13: TYPE LSH-PC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE WITH TITANIUM COMPOSITE FERRULE FOR CATEGORY U |
| BS EN 50411-3-8:2016 | Fibre organizers and closures to be used in optical fibre communication systems. Product specifications Fibre management system, terminal equipment box type 1 for category C |
| 08/30190093 DC : DRAFT SEP 2008 | BS EN 50377-7-4 - CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 7-4: LC-PC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLE MODE FIBRE WITH FULL ZIRCONIA FERRULE FOR CATEGORY C |
| CEI EN 61300-2-44 : 2014 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-44: TESTS - FLEXING OF THE STRAIN RELIEF OF FIBRE OPTIC DEVICES |
| CEI EN 61753-021-2 : 2010 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 021-2: GRADE C/3 SINGLE-MODE FIBRE OPTIC CONNECTORS FOR CATEGORY C - CONTROLLED ENVIRONMENT |
| BS EN 50377-8-13:2010 | Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications Type LSH-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre with titanium composite ferrule for category U |
| I.S. EN 61753-053-2:2014 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 053-2: NON-CONNECTORIZED SINGLE-MODE FIBRE, ELECTRICALLY CONTROLLED, VARIABLE OPTICAL ATTENUATOR FOR CATEGORY C - CONTROLLED ENVIRONMENTS |
| BS EN 61753-053-2:2014 | Fibre optic interconnecting devices and passive components. Performance standard Non-connectorized single-mode fibre, electrically controlled, variable optical attenuator for category C. Controlled environments |
| 05/30128969 DC : 0 | EN 50377-4-4 - CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 4-4: TYPE SC-PC SIMPLEX TERMINATED ON IEC 60793-2 CATEGORY B1.1 SINGLEMODE FIBRE |
| BS EN 50411-3-3:2011 | Fibre organisers and closures to be used in optical fibre communication systems. Product specifications Singlemode optical fibre fusion splice protectors |
| BS EN 61753-381-2:2016 | Fibre optic interconnecting devices and passive components. Performance standard Cyclic arrayed waveguide grating. Category C (controlled environment) |
| BS EN 60794-2-51:2014 | Optical fibre cables Indoor cables. Detail specification for simplex and duplex cables for use in cords for controlled environment |
| BS EN 50377-16-1:2011 | Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications Type LF3 APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre with titanium composite ferrule for category C |
| 13/30277630 DC : 0 | BS EN 50411-2-10 - FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-10: SEALED FIBRE SPLICE CLOSURES TYPE 2, CATEGORY G, FOR FTTH OPTICAL DISTRIBUTION NETWORKS |
| UNE-EN 50377-4-2:2015 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 4-2: Type SC/APC simplex 8° terminated on IEC 60793-2-50 of types B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U |
| CEI EN 50377-14-1 : 2012 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 14-1: CORDS WITH IEC 60793-2-50 SINGLEMODE CATEGORY B1.1 AND B1.3 FIBRE FOR CATEGORY C |
| CEI EN 61753-021-3 : 2014 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 021-3: SINGLE-MODE FIBRE OPTIC CONNECTORS FOR CATEGORY U - UNCONTROLLED ENVIRONMENT |
| 17/30347862 DC : 0 | BS EN 50377-14-1 - CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 14-1: SIMPLEX AND DUPLEX CORDS MADE FROM SIMPLEX PLUGS WITH CYLINDRICAL FERRULES, USING EN 60793-2-50 SINGLEMODE B1 OR B6 FIBRE FOR CATEGORY C ACCORDING TO EN 61753-1 |
| CEI EN 61754-24-11 : 2010 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CONNECTOR INTERFACES - PART 24-11: TYPE SC-RJ CONNECTORS WITH PROTECTIVE HOUSINGS BASED ON IEC 61076-3-117 |
| I.S. EN 61753-111-7:2010 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 111-7: SEALED CLOSURES FOR CATEGORY A - AERIAL |
| BS EN 61753-089-2:2013 | Fibre optic interconnecting devices and passive components. Performance standard Non-connectorized single-mode bidirectional OTDR monitoring WWDM devices for category C. Controlled environment |
| BS EN 61753-084-2:2008 | Fibre optic interconnecting devices and passive components performance standard Non connectorised single-mode 980/1550 nm WWDM devices for category C. Controlled environment |
| 08/30189758 DC : DRAFT SEP 2008 | BS EN 50377-13-3 - CONNECTORS SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 13-3: TYPE LX.5-APC DUPLEX TERMINATED ON EN 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE CATEGORY U |
| CEI EN 61753-121-2 : 2012 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARDS - PART 121-2: SIMPLEX AND DUPLEX CORDS WITH SINGLEMODE FIBRE AND CYLINDRICAL FERRULE CONNECTORS FOR CATEGORY C - CONTROLLED ENVIRONMENT |
| NF EN 50411-2-9 : 2010 | FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATIONS SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-9: NON-SEALED CLOSURES FOR AIR BLOWN FIBRE MICRODUCT CABLE, FOR CATEGORY S & A |
| BS EN 61754-24-21:2009 | Fibre optic interconnecting devices and passive components. Fibre optic connector interfaces Type SC-RJ connectors with protective housings based on IEC 61076-3-106, variant 06 |
| I.S. EN 50377-16-1:2011 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 16-1: TYPE LF3 APC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE WITH TITANIUM COMPOSITE FERRULE FOR CATEGORY C |
| I.S. EN 61753-031-3:2015 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 031-3: NON-CONNECTORIZED SINGLEMODE 1N AND 2N NON-WAVELENGTH-SELECTIVE BRANCHING DEVICES FOR CATEGORY U - UNCONTROLLED ENVIRONMENT |
| CEI EN 50411-2-8 : 2010 | FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-8: MICRODUCT CONNECTORS, FOR AIR BLOWN OPTICAL FIBRES, TYPE 1 |
| CEI EN 61753-021-6 : 2010 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 021-6: GRADE B/2 SINGLE-MODE FIBRE OPTIC CONNECTORS FOR CATEGORY O - UNCONTROLLED ENVIRONMENT |
| I.S. EN 62149-5:2011 | FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - PERFORMANCE STANDARDS - PART 5: ATM-PON TRANSCEIVERS WITH LD DRIVER AND CDR ICS |
| BS EN 61758-1:2008 | Fibre optic interconnecting devices and passive components. Interface standard for closures General and guidance |
| PREN 50411-3-8 : DRAFT 2014 | FIBRE ORGANIZERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-8: FIBRE MANAGEMENT SYSTEM, TERMINAL EQUIPMENT BOX TYPE 1 FOR CATEGORY C |
| NF EN 50377-15-1 : 2011 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 15-1: TYPE MPO WITH 12-FIBRE PPS FERRULES TERMINATED ON IEC 60793-2 CATEGORY A1A MULTIMODE FIBRE FOR 50/125 MICRON MULTIMODE FIBRE |
| BS EN 61753-031-2:2014 | Fibre optic interconnecting devices and passive components. Performance standard Non-connectorized single-mode 1xN and 2xN non-wavelength-selective branching devices for Category C. Controlled environment |
| 10/30235313 DC : DRAFT SEP 2010 | BS EN 50411-6-1 - FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 6-1: UNPROTECTED MICRODUCT FOR CATEGORY S AND A |
| 08/30195624 DC : 0 | BS EN 50377-8-11 - CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-11: TYPE LSH-PC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLE MODE FIBRE WITH TITANIUM COMPOSITE FERRULE FOR CATEGORY C |
| BS EN 50411-2-5:2009 | Fibre organisers and closures to be used in optical fibre communication systems. Product specifications Sealed closures for air blown fibre microduct, type 1, for category S & A |
| 07/30163785 DC : 0 | BS EN 50377-3-1 - CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-1: TYPE SG TERMINATED ON IEC 60793-2-10 CATEGORY A1A, A1B OR EQUIVALENT MULTIMODE FIBRE FOR CATEGORY C |
| BS EN 50411-2-4:2012 | Fibre organisers and closures to be used in optical fibre communication systems. Product specifications Sealed dome fibre splice closures Type 1, for category S & A |
| BS EN 61274-1:2012 | Fibre optic interconnecting devices and passive components. Adaptors for fibre optic connectors Generic specification |
| BS EN 61753-021-6:2008 | Fibre optic interconnecting devices and passive components performance standard Grade B/2 single-mode fibre optic connectors for category O. Uncontrolled environment |
| CEI EN 61753-101-3 : 2010 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 101-3: FIBRE MANAGEMENT SYSTEMS FOR CATEGORY U - UNCONTROLLED ENVIRONMENT |
| 06/30154747 DC : 0 | EN 50377-2-2 - PRODUCT SPECIFICATION FOR CONNECTORS ADAPTORS AND PATCHCORDS TO BE USED IN SINGLE MODE OPTICAL FIBRE COMMUNICATION SYSTEMS - PART 2-2 - TYPE FC/APC 8 TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLE MODE FIBRE, ZIRCONIA FERRULE, FOR CATEGORY C |
| 06/30156214 DC : DRAFT SEP 2006 | BS EN 50377-8-9 - CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-9: LSH-PC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE CATEGORY U |
| BS EN 61300-2-35:2014 | Fibre optic interconnecting devices and passive components. Basic test and measurement procedures Tests. Cable nutation |
| CEI EN 50377-13-3 : 2012 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 13-3: TYPE LX.5-APC DUPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE CATEGORY U |
| I.S. EN 61753-086-2:2009 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 086-2: NON-CONNECTORISED SINGLE-MODE BIDIRECTIONAL 1490/1550 NM DOWNSTREAM 1310 NM UPSTREAM WWDM DEVICES FOR CATEGORY C - CONTROLLED ENVIRONMENT |
| I.S. EN 61754-24-11:2009 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CONNECTOR INTERFACES - PART 24-11: TYPE SC-RJ CONNECTORS WITH PROTECTIVE HOUSINGS BASED ON IEC 61076-3-117 |
| I.S. EN 62005-9-1:2015 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - RELIABILITY - PART 9-1: QUALIFICATION OF PASSIVE OPTICAL COMPONENTS |
| I.S. EN 62134-1:2009 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CLOSURES - PART 1: GENERIC SPECIFICATION |
| CEI EN 50377-3-1 : 2009 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-1: TYPE SG TERMINATED ON IEC 60793-2-10 CATEGORY A1A, A1B OR EQUIVALENT MULTIMODE FIBRE FOR CATEGORY C |
| BS EN 50377-3-1:2008 | Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications Type SG terminated on IEC 60793-2-10 category A1a, A1b or equivalent multimode fibre for category C |
| I.S. EN 50377-4-2:2011 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 4-2: TYPE SC/APC SIMPLEX 8 DEGREES TERMINATED ON IEC 60793-2-50 OF TYPES B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE CATEGORY U |
| NF EN 50377-2-2 : 2011 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-2: FC/APC 8 TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE, CATEGORY C |
| NF EN 50411-3-2 : 2011 | FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-2: SINGLEMODE MECHANICAL FIBRE SPLICE |
| I.S. EN 61753-111-9:2010 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 111-9: SEALED CLOSURES FOR CATEGORY S - SUBTERRANEAN |
| UNE-EN 62005-9-1:2016 | Fibre optic interconnecting devices and passive components - Reliability - Part 9-1: Qualification of passive optical components |
| EN 50377-13-2:2011 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 13-2: Type LX.5-PC DUPLEX terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U |
| EN 61755-3-1:2009 | Fibre optic connector optical interfaces - Part 3-1: Optical interface, 2,5 mm and 1,25 mm diameter cylindrical full zirconia PC ferrule, single mode fibre |
| EN 50411-3-5:2015 | Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 3-5: Wall outlet |
| EN 50377-17-2:2015 | Connector sets and Interconnect components to be used in optical fibre communication systems - Product specifications - Part 17-2: Type FPFT (factory polished field terminated) simplex connector factory terminated with EN 60793-2-50 category B1.3 fibre and field mounted onto reinforced cable containing IEC 60793-2-50 category B1.3 or B6a1 or B6a 2 singlemode fibre (with restricted MFD), category C |
| EN 61280-4-2:2014 | Fibre-optic communication subsystem test procedures - Part 4-2: Installed cable plant - Single-mode attenuation and optical return loss measurement |
| EN 61758-1:2008 | Fibre optic interconnecting devices and passive components - Interface standard for closures - Part 1: General and guidance |
| EN 61754-24-21 : 2009 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CONNECTOR INTERFACES - PART 24-21: TYPE SC-RJ CONNECTORS WITH PROTECTIVE HOUSINGS BASED ON IEC 61076-3-106, VARIANT 06 |
| EN 61753-021-2:2008 | Fibre optic interconnecting devices and passive components performance standard - Part 021-2: Grade C/3 single-mode fibre optic connectors for category C - Controlled environment |
| EN 50377-2-2 : 2009 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 2-2: FC/APC 8 terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule, category C |
| EN 61300-2-35:2014 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-35: Tests - Cable nutation |
| EN 62134-1:2009 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CLOSURES - PART 1: GENERIC SPECIFICATION |
| EN 61753-143-2:2013 | Fibre optic interconnecting devices and passive components - Performance standard - Part 143-2: Optical passive VIPA-based dispersion compensator of single-mode fibre transmission for category C - Controlled environment |
| EN 61755-3-8:2009 | Fibre optic interconnecting devices and passive components - Fibre optic connector optical interfaces - Part 3-8: Optical interface, 2,5 mm and 1,25 mm diameter cylindrical 8 degrees angled-APC composite ferrule using titanium as fibre surrounding material, single mode fibre |
| EN 50377-8-10:2010 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 8-10: Type LSH-APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre with titanium composite ferrule for category C |
| EN 61753-087-6:2012 | Fibre optic interconnecting devices and passive components - Performance standard - Part 087-6: Non-connectorised single-mode bidirectional 1310 nm upstream and 1490 nm downstream WWDM devices for category O - Uncontrolled environment |
| EN 50377-4-2:2011 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 4-2: Type SC/APC simplex 8° terminated on IEC 60793-2-50 of types B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U |
| EN 61753-031-3:2015 | Fibre optic interconnecting devices and passive components - Performance standard - Part 031-3: Non-connectorized single-mode 1×N and 2×N non-wavelength-selective branching devices for Category U - Uncontrolled environment |
| EN 61300-2-6:2011 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-6: Tests - Tensile strength of coupling mechanism |
| EN 50377-8-9:2007 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 8-9: LSH-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U |
| EN 61755-3-10:2017 | Fibre optic interconnecting devices and passive components - Connector optical interfaces - Part 3-10: Connector parameters of non-dispersion shifted single mode physically contacting fibres - Non-angled, ferrule-less, bore alignment connectors |
| EN 50411-3-8:2016 | Fibre organizers and closures to be used in optical fibre communication systems - Product specifications - Part 3-8: Fibre management system, terminal equipment box type 1 for category C |
| EN 61300-2-33:2012 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-33: Tests - Assembly and disassembly of fibre optic mechanical splices, fibre management systems and closures |
| EN 61753-111-9:2010 | Fibre optic interconnecting devices and passive components - Performance standard - Part 111-9: Sealed closures for category S - Subterranean |
| EN 61755-3-7:2009 | Fibre optic interconnecting devices and passive components - Fibre optic connector optical interfaces - Part 3-7: Optical interface, 2,5 mm and 1,25 mm diameter cylindrical PC composite ferrule using titanium as fibre surrounding material, single mode fibre |
| EN 50516-2-1 : 2011 | INDUSTRIAL CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE CONTROL AND COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-1: TYPE ODVA PC INDUSTRIAL TERMINATED ON EN 60793-2-10 CATEGORY A1A AND A1B MULTIMODE FIBRE TO MEET THE REQUIREMENTS OF CATEGORY 1 (INDUSTRIAL ENVIRONMENTS) AS SPECIFIED IN EN 50173-1 AND IEC 61753-1-3 |
| EN 61753-121-2:2017 | Fibre optic interconnecting devices and passive components - Performance standard - Part 121-2: Simplex and duplex cords with single-mode fibre and cylindrical ferrule connectors for category C - Controlled environment |
| EN 50377-11-1:2008 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 11-1: Type MF terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre for category C |
| EN 61753-021-3:2013 | Fibre optic interconnecting devices and passive components - Performance standard - Part 021-3: Single-mode fibre optic connectors for category U - Uncontrolled environment |
| EN 60874-1:2012 | Fibre optic interconnecting devices and passive components - Connectors for optical fibres and cables - Part 1: Generic specification |
| EN 61300-2-47:2016 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-47: Tests - Thermal shocks |
| EN 50411-3-6:2013 | Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 3-6: Multimode mechanical fibre splice for use in an outdoor protected environment (Cat U) |
| EN 61753-031-2:2014 | Fibre optic interconnecting devices and passive components - Performance standard - Part 031-2: Non-connectorized single-mode 1×N and 2×N non-wavelength-selective branching devices for Category C - Controlled environment |
| EN 61753-382-2:2016 | Fibre optic interconnecting devices and passive components - Performance standard - Part 382-2: Non-connectorized single-mode bidirectional G-PON-NGA WWDM devices for category C - Controlled environment |
| EN 62496-3-1:2010 | Optical circuit boards - Performance standard - Part 3-1: Flexible optical circuit boards using unconnectorized optical glass fibres |
| EN 62496-3:2011 | Optical circuit boards - Part 3: Performance standards - General and guidance |
| EN 61753-084-2:2008 | Fibre optic interconnecting devices and passive components performance standard - Part 084-2: Non connectorised single-mode 980/1550 nm WWDM devices for category C - Controlled environment |
| EN 61753-031-6:2014 | Fibre optic interconnecting devices and passive components - Performance standard - Part 031-6: Non-connectorized single-mode 1xN and 2xN non-wavelength-selective branching devices for Category O - Uncontrolled environment |
| EN 61753-101-3:2008 | Fibre optic interconnecting devices and passive components performance standard - Part 101-3: Fibre management systems for Category U - Uncontrolled environment |
| EN 50377-13-3:2011 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 13-3: Type LX.5-APC DUPLEX terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U |
| EN 61753-086-2:2009 | Fibre optic interconnecting devices and passive components performance standard - Part 086-2: Non-connectorised single-mode bidirectional 1490 / 1550 nm downstream 1310 nm upstream WWDM devices for category C - Controlled environment |
| EN 50411-2-9:2010 | Fibre organisers and closures to be used in optical fibre communications systems - Product specifications - Part 2-9: Non-sealed closures for air blown fibre microduct cable, for category S & A |
| EN 60794-2-22:2017 | Optical fibre cables - Part 2-22: Indoor cables - Detail specification for multi-simplex breakout optical cables to be terminated with connectors |
| EN 50411-3-2:2011 | Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 3-2: Singlemode mechanical fibre splice |
| EN 50377-15-1:2011 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 15-1: Type MPO with 12-fibre PPS ferrules terminated on IEC 60793-2 category A1a multimode fibre for 50/125 micron multimode fibre |
| EN 61753-111-7:2010 | Fibre optic interconnecting devices and passive components - Performance standard - Part 111-7: Sealed closures for category A - Aerial |
| BS EN 50377-7-4:2011 | Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications LC-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre with full zirconia ferrule for category C |
| BS EN 61755-3-1:2009 | Fibre optic connector optical interfaces Optical interface, 2,5 mm and 1,25 mm diameter cylindrical full zirconia PC ferrule, single mode fibre |
| BS EN 61753-381-6:2016 | Fibre optic interconnecting devices and passive components. Performance standard Cyclic arrayed waveguide grating. Category O (uncontrolled environment) |
| BS EN 50377-17-1:2013 | Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications Type FPFT (factory polished field terminated) simplex connector factory terminated with EN 60793-2-50 category B1.3 fibre and field mounted onto IEC 60793-2-50 category B1.3 or B6a_1 or B6a_2 singlemode fibre, category C |
| I.S. EN 50411-2-9:2010 | FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATIONS SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-9: NON-SEALED CLOSURES FOR AIR BLOWN FIBRE MICRODUCT CABLE, FOR CATEGORY S & A |
| I.S. EN 50377-10-1:2007 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 10-1: TYPE MU-PC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE CATEGORY C |
| I.S. EN 50411-3-2:2011 | FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-2: SINGLEMODE MECHANICAL FIBRE SPLICE |
| 10/30240333 DC : 0 | BS EN 50411-3-6 - FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-6: MULTIMODE MECHANICAL FIBRE SPLICE |
| BS EN 62496-3-1:2010 | Optical circuit boards. Performance standard Flexible optical circuit boards using unconnectorized optical glass fibres |
| BS EN 62005-9-1:2015 | Fibre optic interconnecting devices and passive components. Reliability Qualification of passive optical components |
| 11/30248951 DC : 0 | BS EN 50411-2-2 - FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-2: SEALED PAN FIBRE SPLICE CLOSURES TYPE 1, FOR CATEGORY S & A |
| BS EN 60794-2-22:2017 | Optical fibre cables Indoor cables. Detail specification for multi-simplex breakout optical cables to be terminated with connectors |
| 11/30248954 DC : 0 | BS EN 50411-2-3 - FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-3: SEALED IN LINE FIBRE SPLICE CLOSURES TYPE 1, FOR CATEGORY S & A |
| BS EN 61753-382-2:2016 | Fibre optic interconnecting devices and passive components. Performance standard Non-connectorized single-mode bidirectional G-PON-NGA WWDM devices for category C. Controlled environment |
| BS EN 50377-8-12:2010 | Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications Type LSH-APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre with titanium composite ferrule for category U |
| BS EN 61753-111-7:2010 | Fibre optic interconnecting devices and passive components performance standard Sealed closures for category A. Aerial |
| BS EN 61300-2-44:2013 | Fibre optic interconnecting devices and passive components. Basic test and measurement procedures Tests. Flexing of the strain relief of fibre optic devices |
| I.S. EN 50411-3-6:2013 | FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-6: MULTIMODE MECHANICAL FIBRE SPLICE FOR USE IN AN OUTDOOR PROTECTED ENVIRONMENT (CAT U) |
| BS EN 61753-101-3:2009 | Fibre optic interconnecting devices and passive components performance standard Fibre management systems for category U. Uncontrolled environment |
| BS EN 50411-3-2:2011 | Fibre organisers and closures to be used in optical fibre communication systems. Product specifications Singlemode mechanical fibre splice |
| BS EN 61753-041-2:2014 | Fibre optic interconnecting devices and passive components. Performance standard Non-connectorized single-mode OTDR reflecting device for category C. Controlled environment |
| BS EN 50411-2-8:2009 | Fibre organisers and closures to be used in optical fibre communication systems. Product specifications Microduct connectors, for air blown optical fibres, Type 1 |
| 14/30262209 DC : 0 | BS EN 50411-3-8 - FIBRE ORGANIZERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-8: FIBRE MANAGEMENT SYSTEM, TERMINAL EQUIPMENT BOX TYPE 1 FOR CATEGORY C |
| CEI EN 50411-3-3 : 2012 | FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-3: SINGLEMODE OPTICAL FIBRE FUSION SPLICE PROTECTORS |
| CEI EN 61300-2-33 : 2013 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-33: TESTS - ASSEMBLY AND DISASSEMBLY OF FIBRE OPTIC MECHANICAL SPLICES, FIBRE MANAGEMENT SYSTEMS AND CLOSURES |
| I.S. EN 61300-2-6:2011 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-6: TESTS - TENSILE STRENGTH OF COUPLING MECHANISM |
| EN 61753-111-8:2010 | Fibre optic interconnecting devices and passive components - Performance standard - Part 111-8: Sealed closures for category G - Ground |
| BS EN 50377-4-4:2011 | Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications Type SC-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U |
| BS EN 61753-121-2:2017 | Fibre optic interconnecting devices and passive components. Performance standard Simplex and duplex cords with single-mode fibre and cylindrical ferrule connectors for category C. Controlled environment |
| BS EN 50377-11-1:2008 | Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications Type MF terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre for category C |
| BS EN 50377-4-2:2011 | Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications Type SC/APC simplex 8° terminated on IEC 60793-2-50 of types B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U |
| BS EN 50377-10-1:2007 | Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications Type MU-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category C |
| BS EN 62149-5:2011 | Fibre optic active components and devices. Performance standards ATM-PON transceivers with LD driver and CDR ICs |
| BS EN 61753-031-3:2015 | Fibre optic interconnecting devices and passive components. Performance standard Non-connectorized single-mode 1×N and 2×N non-wavelength-selective branching devices for Category U. Uncontrolled environment |
| CEI EN 50551-2 : 2014 | SIMPLEX AND DUPLEX CABLES TO BE USED FOR CORDS - PART 2: DETAILED SPECIFICATION AND MINIMUM REQUIREMENTS FOR A 3,0 MM SIMPLEX RUGGEDISED SINGLE MODE FIBRE CABLE TO BE USED FOR PATCHCORDS/CORDS CATEGORY U |
| PREN 50411-2-3 : DRAFT 2011 | FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-3: SEALED INLINE FIBRE SPLICE CLOSURES TYPE 1, FOR CATEGORY S & A |
| CEI EN 61753-087-2 : 2012 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 087-2: NON-CONNECTORISED SINGLE-MODE BIDIRECTIONAL 1310 NM UPSTREAM AND 1490 NM DOWNSTREAM WWDM DEVICES FOR CATEGORY C - CONTROLLED ENVIRONMENT |
| CEI CLC/TR 50378-2-2 : 2011 | PASSIVE COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-2: SC(SC2)-APC CONNECTOR-TYPE FIXED OPTICAL ATTENUATORS USING IEC 60793-2 CATEGORY B1.1 SINGLEMODE FIBRE |
| CEI EN 61753-086-6 : 2012 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 086-6: NON-CONNECTORISED SINGLE-MODE BIDIRECTIONAL 1490/1550 NM DOWNSTREAM AND 1310 NM UPSTREAM WWDM DEVICES FOR CATEGORY O - UNCONTROLLED ENVIRONMENT |
| CEI EN 50377-2-2 : 2010 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-2: FC/APC 8 TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE, CATEGORY C |
| CEI EN 50411-2-2 : 2013 | FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-2: SEALED PAN FIBRE SPLICE CLOSURES TYPE 1, FOR CATEGORY S & A |
| I.S. EN 50411-3-5:2015 | FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-5: WALL OUTLET |
| I.S. EN 61300-2-47:2016 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-47: TESTS - THERMAL SHOCKS |
| BS EN 61755-3-6 : 2006 | FIBRE OPTIC CONNECTOR OPTICAL INTERFACES - PART 3-6: OPTICAL INTERFACE - 2,5 MM AND 1,25 MM DIAMETER CYLINDRICAL 8 DEGREES ANGLED-PC COMPOSITE FERRULE USING CU-NI-ALLOY AS FIBRE SURROUNDING MATERIAL, SINGLE MODE FIBRE |
| I.S. EN 61754-24-21:2009 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CONNECTOR INTERFACES - PART 24-21: TYPE SC-RJ CONNECTORS WITH PROTECTIVE HOUSINGS BASED ON IEC 61076-3-106, VARIANT 06 |
| S.R. CLC/TR 50378-2-1:2008 | PASSIVE COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-1: SC(SC2)-PC CONNECTOR-TYPE FIXED OPTICAL ATTENUATORS USING IEC 60793-2 CATEGORY B1.1 SINGLEMODE FIBRE |
| I.S. EN 61753-071-2:2014 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 071-2: NON-CONNECTORIZED SINGLE-MODE FIBRE OPTIC 1 X 2 AND 2 X 2 SPATIAL SWITCHES FOR CATEGORY C - CONTROLLED ENVIRONMENTS |
| I.S. EN 61753-021-6:2008 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 021-6: GRADE B/2 SINGLE-MODE FIBRE OPTIC CONNECTORS FOR CATEGORY O - UNCONTROLLED ENVIRONMENT |
| I.S. EN 50551-2:2013 | SIMPLEX AND DUPLEX CABLES TO BE USED FOR CORDS - PART 2: DETAILED SPECIFICATION AND MINIMUM REQUIREMENTS FOR A 3,0 MM SIMPLEX RUGGEDISED SINGLE MODE FIBRE CABLE TO BE USED FOR PATCHCORDS/CORDS CATEGORY U |
| CEI EN 50377-8-4 : 2008 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-4: LSH-APC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, COMPOSITE FERRULE CATEGORY U |
| I.S. EN 61753-087-6:2012 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 087-6: NON-CONNECTORISED SINGLE-MODE BIDIRECTIONAL 1310 NM UPSTREAM AND 1490 NM DOWNSTREAM WWDM DEVICES FOR CATEGORY O - UNCONTROLLED ENVIRONMENT (IEC 61753-087-6:2012 (EQV)) |
| I.S. EN 50411-2-3:2012 | FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-3: SEALED INLINE FIBRE SPLICE CLOSURES TYPE 1, FOR CATEGORY S & A |
| I.S. EN 50411-3-3:2011 | FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-3: SINGLEMODE OPTICAL FIBRE FUSION SPLICE PROTECTORS |
| CEI EN 61753-143-2 : 2013 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 143-2: OPTICAL PASSIVE VIPA-BASED DISPERSION COMPENSATOR OF SINGLE-MODE FIBRE TRANSMISSION FOR CATEGORY C - CONTROLLED ENVIRONMENTS |
| CEI EN 50377-8-6 : 2009 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-6: LSH-HR SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE CATEGORY C |
| I.S. EN 50411-2-2:2012 | FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-2: SEALED PAN FIBRE SPLICE CLOSURES TYPE 1, FOR CATEGORY S & A |
| CEI EN 61753-121-3 : 2012 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARDS - PART 121-3: SIMPLEX AND DUPLEX CORDS WITH SINGLEMODE FIBRE AND CYLINDRICAL FERRULE CONNECTORS FOR CATEGORY U - UNCONTROLLED ENVIRONMENT |
| CEI EN 50411-3-6 : 2014 | FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-6: MULTIMODE MECHANICAL FIBRE SPLICE FOR USE IN AN OUTDOOR PROTECTED ENVIRONMENT (CAT U) |
| I.S. EN 61753-041-2:2014 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 041-2: NON-CONNECTORIZED SINGLE-MODE OTDR REFLECTING DEVICE FOR CATEGORY C - CONTROLLED ENVIRONMENT |
| 08/30195630 DC : 0 | BS EN 50377-8-13 - CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-13: TYPE LSH-PC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLE MODE FIBRE WITH TITANIUM COMPOSITE FERRULE FOR CATEGORY U |
| BS EN 61280-4-2:2014 | Fibre-optic communication subsystem test procedures Installed cable plant. Single-mode attenuation and optical return loss measurement |
| BS EN 50516-2-1:2011 | Industrial connector sets and interconnect components to be used in optical fibre control and communication systems. Product specifications Type ODVA PC industrial terminated on EN 60793-2-10 category A1a and A1b multimode fibre to meet the requirements of category I (industrial environments) as specified in EN 50173-1 and IEC 61753-1-3 |
| I.S. EN 50377-2-2:2009 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-2: FC/APC 8 TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE, CATEGORY C |
| NF EN 50377-8-12 : 2011 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-12: TYPE LSH-APC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE WITH TITANIUM COMPOSITE FERRULE FOR CATEGORY U |
| 10/30216926 DC : 0 | BS EN 50411-3-3 - FIRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATION - PART 3-3: SINGLEMODE OPTICAL FIBRE FUSION SPLICE PROTECTORS |
| I.S. EN 62496-3:2011 | OPTICAL CIRCUIT BOARDS - PART 3: PERFORMANCE STANDARDS - GENERAL AND GUIDANCE |
| BS EN 61753-086-2:2009 | Fibre optic interconnecting devices and passive components performance standard Non-connectorised single-mode bidirectional 1490 / 1550 nm downstream 1310 nm upstream WWDM devices for category C. Controlled environment |
| CEI EN 50516-1-1 : 2012 | INDUSTRIAL CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE CONTROL AND COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 1-1: TYPE SC-RJ PC INDUSTRIAL TERMINATED ON EN 60793-2-10 CATEGORY A1A AND A1B MULTIMODE FIBRE TO MEET THE REQUIREMENTS OF CATEGORY I (INDUSTRIAL ENVIRONMENTS) AS SPECIFIED IN IEC 61753-1-3 |
| CEI EN 61300-2-12 : 2011 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-12: TESTS - IMPACT |
| BS EN 61753-1-3:2014 | Fibre optic interconnecting devices and passive components. Performance standard General and guidance for single-mode fibre optic connector and cable assembly for industrial environment, Category I |
| BS EN 50377-13-3:2011 | Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications Type LX.5-APC DUPLEX terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U |
| BS EN 61753-143-2:2013 | Fibre optic interconnecting devices and passive components. Performance standard Optical passive VIPA-based dispersion compensator of single-mode fibre transmission for category C. Controlled environment |
| BS EN 50411-3-1:2012 | Fibre organisers and closures to be used in optical fibre communication systems. Product specifications Fibre management system, splice wall box, for category C & G |
| 08/30195627 DC : 0 | BS EN 50377-8-12 - CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-12: TYPE LSH-APC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLE MODE FIBRE WITH TITANIUM COMPOSITE FERRULE FOR CATEGORY U |
| BS EN 50377-8-10:2010 | Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications Type LSH-APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre with titanium composite ferrule for category C |
| 14/30285749 DC : 0 | BS EN 50377-17-2 - CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 17-2: TYPE FPFT (FACTORY POLISHED FIELD TERMINATED) SIMPLEX CONNECTOR FACTORY TERMINATED WITH EN 60793-2-50 CATEGORY B1.3 FIBRE AND FIELD MOUNTED ONTO TIGHT JACKET CABLE CONTAINING IEC 60793-2-50 CATEGORY B1.3 OR B6A1 OR B6A 2 SIN |
| 13/30271356 DC : 0 | BS EN 50411-3-5 - FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-5 WALL OUTLET |
| BS EN 61300-2-37:2007 | Fibre optic interconnecting devices and passive components. Basic test and measurement procedures Tests. Cable bending for fibre optic closures |
| BS EN 50377-8-11:2010 | Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications Type LSH-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre with titanium composite ferrule for category C |
| BS EN 50411-2-2:2012 | Fibre organisers and closures to be used in optical fibre communication systems. Product specifications Sealed pan fibre splice closures Type 1, for category S & A |
| CEI EN 50377-15-1 : 2012 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 15-1: TYPE MPO WITH 12-FIBRE PPS FERRULES TERMINATED ON IEC 60793-2 CATEGORY A1A MULTIMODE FIBRE FOR 50/125 MICRON MULTIMODE FIBRE |
| BS EN 61755-3-31:2015 | Fibre optic interconnecting devices and passive components. Connector optical interfaces Connector parameters of non-dispersion shifted single mode physically contacting fibres. Angled polyphenylene sulphide rectangular ferrules |
| BS EN 50377-8-9:2007 | Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications LSH-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U |
| I.S. EN 50377-8-9:2007 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-9: LSH-PC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE CATEGORY U |
| CEI EN 61300-2-6 : 2012 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-6: TESTS - TENSILE STRENGTH OF COUPLING MECHANISM |
| CEI EN 50411-2-9 : 2011 | FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATIONS SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-9: NON-SEALED CLOSURES FOR AIR BLOWN FIBRE MICRODUCT CABLE, FOR CATEGORY S & A |
| 17/30353664 DC : 0 | BS EN 50377-18-1 - CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 18-1: TYPE 4+4X10.3125 GB/S MPO (QFSP) TRANSCEIVER MATED WITH AN MPO CONNECTOR EQUIPPED WITH 12 FIBRE PPS FERRULES TERMINATED ON EN 60793-2-10 CATEGORY A1A.3A OR A1A.3B 50/125 MICRON MULTIMODE FIBRE |
| BS EN 61753-031-6:2014 | Fibre optic interconnecting devices and passive components. Performance standard Non-connectorized single-mode 1xN and 2xN non-wavelength-selective branching devices for Category O. Uncontrolled environment |
| CEI EN 50377-8-11 : 2012 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-11: TYPE LSH-PC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE WITH TITANIUM COMPOSITE FERRULE FOR CATEGORY C |
| I.S. EN 60874-1:2012 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - CONNECTORS FOR OPTICAL FIBRES AND CABLES - PART 1: GENERIC SPECIFICATION (IEC 60874-1:2011 (EQV)) |
| 12/30262212 DC : 0 | BS EN 50516-3-1 - INDUSTRIAL CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE CONTROL AND COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-1: TYPE ODVA APC TERMINATED ON EN 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE TO MEET THE REQUIREMENTS OF CATEGORY 1 (INDUSTRIAL ENVIRONMENTS) AS SPECIFIED IN EN 50173-1 AND IEC 61753-1-3 |
| BS EN 61753-021-3:2013 | Fibre optic interconnecting devices and passive components. Performance standard Single-mode fibre optic connectors for category U. Uncontrolled environment |
| BS EN 50377-13-2:2011 | Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications Type LX.5-PC DUPLEX terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U |
| 17/30347865 DC : 0 | BS EN 50411-3-4 - FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-4: FIBRE MANAGEMENT SYSTEMS, WALL BOX FOR SPLICE TO PATCHCORD CONNECTIONS, FOR CATEGORY C AND A |
| 08/30189753 DC : DRAFT SEP 2008 | BS EN 50377-13-2 - CONNECTORS SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 13-2: TYPE LX.5-PC DUPLEX TERMINATED ON EN 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE CATEGORY U |
| CEI EN 50411-2 : 2010 | FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2: GENERAL AND GUIDANCE FOR OPTICAL FIBRE CABLE JOINT CLOSURES, PROTECTED MICRODUCT CLOSURES, AND MICRODUCT CONNECTORS |
| CEI EN 61753-087-6 : 2013 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 087-6: NON-CONNECTORISED SINGLE-MODE BIDIRECTIONAL 1310 NM UPSTREAM AND 1490 NM DOWNSTREAM WWDM DEVICES FOR CATEGORY O - UNCONTROLLED ENVIRONMENT |
| I.S. EN 61300-2-37:2016 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-37: TESTS - CABLE BENDING FOR FIBRE OPTIC CLOSURES |
| BS EN 50516-3-1:2014 | Industrial connector sets and interconnect components to be used in optical fibre control and communication systems. Product specifications Type ODVA APC terminated on EN 60793-2-50 category B1.1 and B1.3 singlemode fibre to meet the requirements of category I (industrial environments) as specified in EN 50173-1 and IEC 61753-1-3 |
| 08/30193101 DC : 0 | BS EN 50377-4-2 - CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 4-2: TYPE SC/APC SIMPLEX 8 DEGREE TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE CATEGORY U |
| CEI EN 50377-13-2 : 2012 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 13-2: TYPE LX.5-PC DUPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE CATEGORY U |
| CEI EN 50377-8-12 : 2012 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-12: TYPE LSH-APC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE WITH TITANIUM COMPOSITE FERRULE FOR CATEGORY U |
| NF EN 50377-4-4 : 2011 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 4-4: TYPE SC-PC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE CATEGORY U |
| I.S. EN 50377-8-10:2010 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-10: TYPE LSH-APC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE WITH TITANIUM COMPOSITE FERRULE FOR CATEGORY C |
| CEI EN 50516-2-1 : 2012 | INDUSTRIAL CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE CONTROL AND COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-1: TYPE ODVA PC INDUSTRIAL TERMINATED ON EN 60793-2-10 CATEGORY A1A AND A1B MULTIMODE FIBRE TO MEET THE REQUIREMENTS OF CATEGORY 1 (INDUSTRIAL ENVIRONMENTS) AS SPECIFIED IN EN 50173-1 AND IEC 61753-1-3 |
| PREN 50411-4-1 : DRAFT 2017 | FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 4-1: PASSIVE OPTICAL STREET CABINET FOR CATEGORY A |
| I.S. EN 50377-11-1:2008 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 11-1: TYPE MF TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE FOR CATEGORY C |
| I.S. EN 50411-2-4:2012 | FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-4: SEALED DOME FIBRE SPLICE CLOSURES TYPE 1, FOR CATEGORY S & A |
| I.S. EN 61753-086-6:2011 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 086-6: NON-CONNECTORIZED SINGLE-MODE BIDIRECTIONAL 1490/1550 NM DOWNSTREAM AND 1310 NM UPSTREAM WWDM DEVICES FOR CATEGORY O - UNCONTROLLED ENVIRONMENT |
| CEI EN 50411-3-1 : 2013 | FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-1: FIBRE MANAGEMENT SYSTEM, SPLICE WALL BOX, FOR CATEGORY C & G |
| CEI EN 61753-111-8 : 2011 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 111-8: SEALED CLOSURES FOR CATEGORY G - GROUND |
| I.S. EN 61753-088-2:2013 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 088-2: NON-CONNECTORIZED SINGLE-MODE FIBRE OPTIC LAN WDM DEVICES WITH CHANNEL SPACING OF 800 GHZ FOR CATEGORY C - CONTROLLED ENVIRONMENTS (IEC 61753-088-2:2013 (EQV)) |
| BS EN 61300-2-47:2010 | Fibre optic interconnecting devices and passive components. Basic test and measurement procedures Tests. Thermal shocks |
| CEI EN 62496-3 : 2012 | OPTICAL CIRCUIT BOARDS - PART 3: PERFORMANCE STANDARDS - GENERAL AND GUIDANCE |
| CEI EN 50411-2-3 : 2013 | FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-3: SEALED INLINE FIBRE SPLICE CLOSURES TYPE 1, FOR CATEGORY S & A |
| CEI EN 61758-1 : 2010 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - INTERFACE STANDARD FOR CLOSURES - PART 1: GENERAL AND GUIDANCE |
| I.S. EN 61300-2-44:2013 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-44: TESTS - FLEXING OF THE STRAIN RELIEF OF FIBRE OPTIC DEVICES (IEC 61300-2-44:2013 (EQV)) |
| EN 62149-5:2011 | Fibre optic active components and devices - Performance standards - Part 5: ATM-PON transceivers with LD driver and CDR ICs |
| EN 61753-071-2:2014 | Fibre optic interconnecting devices and passive components - Performance standard - Part 071-2: Non-connectorized single-mode fibre optic 1 × 2 and 2 × 2 spatial switches for category C - Controlled environments |
| EN 61753-042-2:2014 | Fibre optic interconnecting devices and passive components - Performance standard - Part 042-2: Plug-pigtail-style and plug-receptacle-style OTDR reflecting devices for category C - Controlled environments |
| I.S. EN 50377-6-2:2007 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 6-2: SC-RJ SINGLE MODE TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, CATEGORY U |
| BS EN 61300-2-33:2012 | Fibre optic interconnecting devices and passive components. Basic test and measurement procedures Tests. Assembly and disassembly of fibre optic mechanical splices, fibre management systems and closures |
| CEI EN 50411-2-5 : 2010 | FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-5: SEALED CLOSURES FOR AIR BLOWN FIBRE MICRODUCT, TYPE 1, FOR CATEGORY S & A |
| I.S. EN 50377-7-4:2011 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 7-4: LC-PC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE WITH FULL ZIRCONIA FERRULE FOR CATEGORY C |
| I.S. EN 50377-8-11:2010 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-11: TYPE LSH-PC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE WITH TITANIUM COMPOSITE FERRULE FOR CATEGORY C |
| PREN 50411-2-10 : DRAFT 2013 | FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-10: SEALED FIBRE SPLICE CLOSURES TYPE 2, CATEGORY G, FOR FTTH OPTICAL DISTRIBUTION NETWORKS |
| BS EN 61753-021-2:2008 | Fibre optic interconnecting devices and passive components performance standard Grade C/3 single-mode fibre optic connectors for category C. Controlled environment |
| 11/30248957 DC : 0 | BS EN 50411-2-4 - FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-4: SEALED DOME FIBRE SPLICE CLOSURES TYPE 1, FOR CATEGORY S & A |
| BS EN 62496-3:2011 | Optical circuit boards Performance standards. General and guidance |
| BS EN 50377-8-8:2007 | Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications LSH-APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U |
| CEI EN 61753-086-2 : 2011 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 086-2: NON-CONNECTORISED SINGLE-MODE BIDIRECTIONAL 1490 / 1550 NM DOWNSTREAM 1310 NM UPSTREAM WWDM DEVICES FOR CATEGORY C - CONTROLLED ENVIRONMENT |
| BS EN 50377-17-2:2015 | Connector sets and Interconnect components to be used in optical fibre communication systems. Product specifications Type FPFT (factory polished field terminated) simplex connector factory terminated with EN 60793-2-50 category B1.3 fibre and field mounted onto reinforced cable containing IEC 60793-2-50 category B1.3 or B6a1 or B6a 2 singlemode fibre (with restricted MFD), category C |
| 06/30156211 DC : DRAFT SEP 2006 | BS EN 50377-10-1 - CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 10-1: TYPE MU-PC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE CATEGORY C |
| BS EN 50411-2:2008 | Fibre organisers and closures to be used in optical fibre communication systems. Product specifications General and guidance for optical fibre cable joint closures, protected microduct closures, and microduct connectors |
| BS EN 61755-3-10:2017 | Fibre optic interconnecting devices and passive components. Connector optical interfaces Connector parameters of non-dispersion shifted single mode physically contacting fibres. Non-angled, ferrule-less, bore alignment connectors |
| BS EN 61755-3-7:2009 | Fibre optic interconnecting devices and passive components. Fibre optic connector optical interfaces Optical interface, 2,5 mm and 1,25 mm diameter cylindrical PC composite ferrule using titanium as fibre surrounding material, single mode fibre |
| CEI EN 50377-8-10 : 2012 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-10: TYPE LSH-APC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE WITH TITANIUM COMPOSITE FERRULE FOR CATEGORY C |
| BS EN 50377-15-1:2011 | Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications Type MPO with 12-fibre PPS ferrules terminated on IEC 60793-2 category A1a multimode fibre for 50/125 micron multimode fibre |
| BS EN 61753-111-9:2010 | Fibre optic interconnecting devices and passive components performance standard Sealed closures for category S. Subterranean |
| BS EN 50411-2-3:2012 | Fibre organisers and closures to be used in optical fibre communication systems. Product specifications Sealed inline fibre splice closures Type 1, for category S & A |
| I.S. EN 61753-101-3:2008 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 101-3: FIBRE MANAGEMENT SYSTEMS FOR CATEGORY U - UNCONTROLLED ENVIRONMENT |
| BS EN 61755-3-8:2009 | Fibre optic interconnecting devices and passive components. Fibre optic connector optical interfaces Optical interface, 2,5 mm and 1,25 mm diameter cylindrical 8 degrees angled-APC composite ferrule using titanium as fibre surrounding material, single mode fibre |
| CEI EN 61274-1 : 2012 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - ADAPTORS FOR FIBRE OPTIC CONNECTORS - PART 1: GENERIC SPECIFICATION |
| CEI CLC/TR 50378-2-1 : 2012 | PASSIVE COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-1: SC(SC2)-PC CONNECTOR-TYPE FIXED OPTICAL ATTENUATORS USING IEC 60793-2 CATEGORY B1.1 SINGLEMODE FIBRE |
| BS EN 61300-2-6:2011 | Fibre optic interconnecting devices and passive components. Basic test and measurement procedures Tests. Tensile strength of coupling mechanism |
| PD CLC/TR 50378-2-2:2008 | Passive components to be used in optical fibre communication systems. Product specifications SC(SC2)-APC connector-type fixed optical attenuators using IEC 60793-2 Category B1.1 singlemode fibre |
| BS EN 61753-111-8:2010 | Fibre optic interconnecting devices and passive components performance standard Sealed closures for category G. Ground |
| I.S. EN 61753-121-3:2010 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 121-3: SIMPLEX AND DUPLEX CORDS WITH SINGLE-MODE FIBRE AND CYLINDRICAL FERRULE CONNECTORS FOR CATEGORY U - UNCONTROLLED ENVIRONMENT |
| CEI EN 50377-8-5 : 2008 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-5: LSH-PC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, COMPOSITE FERRULE CATEGORY U |
| PREN 50377-14-1 : DRAFT 2017 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 14-1: SIMPLEX AND DUPLEX CORDS MADE FROM SIMPLEX PLUGS WITH CYLINDRICAL FERRULES, USING EN 60793-2-50 SINGLEMODE B1 OR B6 FIBRE FOR CATEGORY C ACCORDING TO EN 61753-1 |
| BS EN 50411-2-10:2015 | Fibre organisers and closures to be used in optical fibre communication systems. Product specifications Sealed fibre splice closures type 2, category G, for FTTH optical distribution networks |
| BS EN 50377-6-2:2007 | Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications SC-RJ single mode terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, category U |
| CEI EN 62005-9-1 : 2016 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - RELIABILITY - PART 9-1: QUALIFICATION OF PASSIVE OPTICAL COMPONENTS |
| BS EN 61753-087-2:2011 | Fibre optic interconnecting devices and passive components. Performance standard Non-connectorized single-mode bidirectional 1310 nm upstream and 1490 nm downstream WWDM devices for category C. Controlled environment |
| BS EN 61753-088-2:2013 | Fibre optic interconnecting devices and passive components. Performance standard Non-connectorized single-mode fibre optic LAN WDM devices with channel spacing of 800 GHz for category C. Controlled environments |
| BS EN 61754-24-11:2009 | Fibre optic interconnecting devices and passive components. Fibre optic connector interfaces Type SC-RJ connectors with protective housings based on IEC 61076-3-117 |
| CEI EN 50411-2-4 : 2013 | FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-4: SEALED DOME FIBRE SPLICE CLOSURES TYPE 1, FOR CATEGORY S & A |
| CEI EN 61753-084-2 : 2010 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 084-2: NON CONNECTORISED SINGLE-MODE 980/1550 NM WWDM DEVICES FOR CATEGORY C - CONTROLLED ENVIRONMENT |
| 06/30156201 DC : 0 | BS EN 50411-2-3 - FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-3: SEALED INLINE FIBRE SPLICE CLOSURES TYPE 1, FOR CATEGORY S AND A |
| BS EN 61300-2-12:2009 | Fibre optic interconnecting devices and passive components. Basic test and measurement procedures Tests. Impact |
| BS EN 50377-14-1:2011 | Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications Cords with IEC 60793-2-50 singlemode category B1.1 and B1.3 fibre for category C |
| 08/30193326 DC : DRAFT NOV 2008 | BS EN 50377-14-1 - CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 14-1: PATCH CORDS WITH EN 60793-2-50 SINGLE MODE CATEGORY B1.1 AND B1.3 FIBRE FOR CATEGORY C |
| CEI EN 50377-4-2 : 2012 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 4-2: TYPE SC/APC SIMPLEX 8 DEGREES TERMINATED ON IEC 60793-2-50 OF TYPES B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE CATEGORY U |
| CEI EN 50516-3-1 : 2014 | INDUSTRIAL CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE CONTROL AND COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-1: TYPE ODVA APC TERMINATED ON EN 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE TO MEET THE REQUIREMENTS OF CATEGORY 1 (INDUSTRIAL ENVIRONMENTS) AS SPECIFIED IN EN 50173-1 AND IEC 61753-1-3 |
| I.S. EN 50411-3-8:2016 | FIBRE ORGANIZERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-8: FIBRE MANAGEMENT SYSTEM, TERMINAL EQUIPMENT BOX TYPE 1 FOR CATEGORY C |
| I.S. EN 50411-3-1:2012 | FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-1: FIBRE MANAGEMENT SYSTEM, SPLICE WALL BOX, FOR CATEGORY C & G |
| I.S. EN 50377-13-2:2011 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 13-2: TYPE LX.5-PC DUPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE CATEGORY U |
| I.S. EN 50516-2-1:2011 | INDUSTRIAL CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE CONTROL AND COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-1: TYPE ODVA PC INDUSTRIAL TERMINATED ON EN 60793-2-10 CATEGORY A1A AND A1B MULTIMODE FIBRE TO MEET THE REQUIREMENTS OF CATEGORY I (INDUSTRIAL ENVIRONMENTS) AS SPECIFIED IN EN 50173-1 AND IEC 61753-1-3 |
| I.S. EN 50377-13-3:2011 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 13-3: TYPE LX.5-APC DUPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE CATEGORY U |
| I.S. EN 50411-2-10:2015 | FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-10: SEALED FIBRE SPLICE CLOSURES TYPE 2, CATEGORY G, FOR FTTH OPTICAL DISTRIBUTION NETWORKS |
| I.S. EN 50516-3-1:2014 | INDUSTRIAL CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE CONTROL AND COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-1: TYPE ODVA APC TERMINATED ON EN 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE TO MEET THE REQUIREMENTS OF CATEGORY 1 (INDUSTRIAL ENVIRONMENTS) AS SPECIFIED IN EN 50173-1 AND IEC 61753-1-3 |
| I.S. EN 61755-3-10:2017 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - CONNECTOR OPTICAL INTERFACES - PART 3-10: CONNECTOR PARAMETERS OF NON-DISPERSION SHIFTED SINGLE MODE PHYSICALLY CONTACTING FIBRES - NON-ANGLED, FERRULE-LESS, BORE ALIGNMENT CONNECTORS |
| CEI EN 50377-8-2 : 2008 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-2: TYPE LSH-APC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, COMPOSITE FERRULE CATEGORY C |
| I.S. EN 61753-381-6:2016 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 381-6: CYCLIC ARRAYED WAVEGUIDE GRATING - CATEGORY O (UNCONTROLLED ENVIRONMENT) |
| I.S. EN 61753-021-3:2013 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 021-3: SINGLE-MODE FIBRE OPTIC CONNECTORS FOR CATEGORY U - UNCONTROLLED ENVIRONMENT (IEC 61753-021-3:2012 (EQV)) |
| I.S. EN 61753-1-3:2014 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 1-3: GENERAL AND GUIDANCE FOR SINGLE-MODE FIBRE OPTIC CONNECTOR AND CABLE ASSEMBLY FOR INDUSTRIAL ENVIRONMENT, CATEGORY 1 |
| CEI EN 50411-3-2 : 2012 | FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-2: SINGLEMODE MECHANICAL FIBRE SPLICE |
| PREN 50411-2-4 : DRAFT 2011 | FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-4: SEALED DOME FIBRE SPLICE CLOSURES TYPE 1, FOR CATEGORY S & A |
| CEI EN 60874-1 : 2012 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - CONNECTORS FOR OPTICAL FIBRES AND CABLES - PART 1: GENERIC SPECIFICATION |
| CEI EN 50377-4-4 : 2012 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 4-4: TYPE SC-PC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE CATEGORY U |
| I.S. EN 50516-1-1:2011 | INDUSTRIAL CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE CONTROL AND COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 1-1: TYPE SC-RJ PC INDUSTRIAL TERMINATED ON EN 60793-2-10 CATEGORY A1A AND A1B MULTIMODE FIBRE TO MEET THE REQUIREMENTS OF CATEGORY I (INDUSTRIAL ENVIRONMENTS) AS SPECIFIED IN IEC 61753-1-3 |
| I.S. EN 61300-2-33:2012 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-33: TESTS - ASSEMBLY AND DISASSEMBLY OF FIBRE OPTIC MECHANICAL SPLICES, FIBRE MANAGEMENT SYSTEMS AND CLOSURES (IEC 61300-2-33:2012 (EQV)) |
| I.S. EN 61753-121-2:2017 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARDS - PART 121-2: SIMPLEX AND DUPLEX CORDS WITH SINGLE-MODE FIBRE AND CYLINDRICAL FERRULE CONNECTORS FOR CATEGORY C - CONTROLLED ENVIRONMENT |
| I.S. EN 50377-8-12:2010 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-12: TYPE LSH-APC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE WITH TITANIUM COMPOSITE FERRULE FOR CATEGORY U |
| I.S. EN 50411-2:2008 | FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2: GENERAL AND GUIDANCE FOR OPTICAL FIBRE CABLE JOINT CLOSURES, PROTECTED MICRODUCT CLOSURES, AND MICRODUCT CONNECTORS |
| UNE-EN 61300-2-6:2012 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-6: Tests - Tensile strength of coupling mechanism |
| UNE-EN 61300-2-44:2013 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-44: Tests - Flexing of the strain relief of fibre optic devices |
| EN 50411-2-3:2012 | Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 2-3: Sealed inline fibre splice closures Type 1, for category S & A |
| EN 50411-3-1:2012 | Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 3-1: Fibre management system, splice wall box, for category C & G |
| EN 50377-8-12:2010 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 8-12: Type LSH-APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre with titanium composite ferrule for category U |
| EN 61753-086-6 : 2011 | Fibre optic interconnecting devices and passive components - Performance standard - Part 086-6: Non-connectorized single-mode bidirectional 1 490 / 1 550 nm downstream and 1 310 nm upstream WWDM devices for category O - Uncontrolled environment |
| BS EN 62134-1:2009 | Fibre optic interconnecting devices and passive components. Fibre optic closures Generic specification |
| BS EN 50411-2-9:2010 | Fibre organisers and closures to be used in optical fibre communications systems. Product specifications Non-sealed closures for air blown fibre microduct cable, for category S & A |
| CEI EN 61753-111-9 : 2011 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 111-9: SEALED CLOSURES FOR CATEGORY S - SUBTERRANEAN |
| 06/30156204 DC : DRAFT SEP 2006 | BS EN 50378-3-1 - PASSIVE COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-1: TYPE: 100/200 GHZ DWDM MODULE TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLE MODE FIBRE |
| BS EN 50551-2:2013 | Simplex and duplex cables to be used for cords Detailed specification and minimum requirements for a 3,0 mm simplex ruggedised single mode fibre cable to be used for patchcords/cords category U |
| I.S. EN 50377-8-13:2010 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-13: TYPE LSH-PC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE WITH TITANIUM COMPOSITE FERRULE FOR CATEGORY U |
| I.S. EN 50377-17-2:2015 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 17-2: TYPE FPFT (FACTORY POLISHED FIELD TERMINATED) SIMPLEX CONNECTOR FACTORY TERMINATED WITH EN 60793-2-50 CATEGORY B1.3 FIBRE AND FIELD MOUNTED ONTO REINFORCED CABLE CONTAINING IEC 60793-2-50 CATEGORY B1.3 OR B6A1 OR B6A2 SINGLEMODE FIBRE |
| 17/30347868 DC : 0 | BS EN 50411-4-1 - FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 4-1: PASSIVE OPTICAL STREET CABINET FOR CATEGORY A |
| CEI EN 50377-7-4 : 2012 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 7-4: LC-PC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE WITH FULL ZIRCONIA FERRULE FOR CATEGORY C |
| CEI EN 50411-6-1 : 2012 | FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 6-1: UNPROTECTED MICRODUCT FOR CATEGORY S AND A |
| I.S. EN 61753-089-2:2013 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 089-2: NON-CONNECTORIZED SINGLE-MODE BIDIRECTIONAL OTDR MONITORING WWDM DEVICES FOR CATEGORY C - CONTROLLED ENVIRONMENT (IEC 61753-089-2:2013 (EQV)) |
| 08/30185105 DC : DRAFT JULY 2008 | BS EN 50377-15-1 - CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 15-1: TYPE MPO WITH PPS FERRULES TERMINATED ON IEC 60793-2 CATEGORY A1A MULTIMODE FIBRE FOR 50/125 MICRON MULTIMODE FIBRE |
| CEI EN 61755-3-10 : 1ED 2017 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - CONNECTOR OPTICAL INTERFACES - PART 3-10: CONNECTOR PARAMETERS OF NON-DISPERSION SHIFTED SINGLE MODE PHYSICALLY CONTACTING FIBRES - NON-ANGLED, FERRULE-LESS, BORE ALIGNMENT CONNECTORS |
| 15/30272336 DC : 0 | BS EN 50411-3-4 - FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-4: FIBRE MANAGEMENT SYSTEM, MODULAR SPLICE AND CONNECTOR WALL BOX, FOR CATEGORY C & A |
| BS EN 50377-2-2:2009 | Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications FC/APC 8 terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule, category C |
| BS EN 61753-086-6:2011 | Fibre optic interconnecting devices and passive components. Performance standard Non-connectorized single-mode bidirectional 1490 / 1550 nm downstream and 1310 nm upstream WWDM devices for category O. Uncontrolled environment |
| BS EN 50411-3-6:2013 | Fibre organisers and closures to be used in optical fibre communication systems. Product specifications Multimode mechanical fibre splice for use in an outdoor protected environment (Cat U) |
| BS EN 61753-087-6:2012 | Fibre optic interconnecting devices and passive components. Performance standard Non-connectorised single-mode bidirectional 1310 nm upstream and 1490 nm downstream WWDM devices for category O. Uncontrolled environment |
| BS EN 61755-3-2:2009 | Fibre optic connector optical interfaces Optical interface, 2,5 mm and 1,25 mm diameter cylindrical full zirconia ferrules for 8 degrees angled-PC single mode fibres |
| BS EN 50516-1-1:2011 | Industrial connector sets and interconnect components to be used in optical fibre control and communication systems. Product specifications Type SC-RJ PC industrial terminated on EN 60793-2-10 category A1a and A1b multimode fibre to meet the requirements of category I (industrial environments) as specified in IEC 61753-1-3 |
| BS EN 50411-3-5:2015 | Fibre organisers and closures to be used in optical fibre communication systems. Product specifications Wall outlet |
| BS EN 62343-2:2014 | Dynamic modules Reliability qualification |
| I.S. EN 50411-2-8:2009 | FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-8: MICRODUCT CONNECTORS, FOR AIR BLOWN OPTICAL FIBRES, TYPE 1 |
| I.S. EN 61753-111-8:2010 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 111-8: SEALED CLOSURES FOR CATEGORY G - GROUND |
| 09/30197413 DC : 0 | BS EN 50411-3-2 - FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-2: SINGLEMODE MECHANICAL FIBRE SPLICE |
| BS EN 61753-042-2:2014 | Fibre optic interconnecting devices and passive components. Performance standard Plug-pigtail-style and plug-receptacle-style OTDR reflecting devices for category C. Controlled environments |
| BS EN 50411-6-1:2011 | Fibre organisers and closures to be used in optical fibre communication systems. Product specifications Unprotected microduct for category S and A |
| BS EN 61753-121-3:2010 | Fibre optic interconnecting devices and passive components. Performance standard Simplex and duplex cords with single-mode fibre and cylindrical ferrule connectors for category U. Uncontrolled environment |
| PREN 50411-2-2 : DRAFT 2011 | FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-2: SEALED PAN FIBRE SPLICE CLOSURES TYPE 1, FOR CATEGORY S & A |
| CEI EN 50377-11-1 : 2009 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 11-1: TYPE MF TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE FOR CATEGORY C |
| 08/30195621 DC : 0 | BS EN 50377-8-10 - CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-10: TYPE LSH-APC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLE MODE FIBRE WITH TITANIUM COMPOSITE FERRULE FOR CATEGORY C |
| BS EN 60874-1:2012 | Fibre optic interconnecting devices and passive components. Connectors for optical fibres and cables Generic specification |
| PD CLC/TR 50378-2-1:2009 | Passive components to be used in optical fibre communication systems. Product specifications SC(SC2)-PC connector-type fixed optical attenuators using IEC 60793-2 Category B1.1 singlemode fibre |
| CEI EN 50377-17-1 : 2013 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 17-1: TYPE FPFT (FACTORY POLISHED FIELD TERMINATED) SIMPLEX CONNECTOR FACTORY TERMINATED WITH EN 60793-2-50 CATEGORY B1.3 FIBRE AND FIELD MOUNTED ONTO IEC 60793-2-50 CATEGORY B1.3 OR B6A1 OR B6A2 SINGLEMODE FIBRE, CATEGORY C |
| CEI EN 61753-089-2 : 2014 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 089-2: NON-CONNECTORISED SINGLE-MODE BIDIRECTIONAL OTDR MONITORING WWDM DEVICES FOR CATEGORY C - CONTROLLED ENVIRONMENT |
| CEI EN 62149-5 : 2012 | FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - PERFORMANCE STANDARDS - PART 5: ATM-PON TRANSCEIVERS WITH LD DRIVER AND CDR ICS |
| I.S. EN 61753-021-2:2008 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 021-2: GRADE C/3 SINGLE-MODE FIBRE OPTIC CONNECTORS FOR CATEGORY C - CONTROLLED ENVIRONMENT |
| I.S. EN 50411-2-5:2009 | FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-5: SEALED CLOSURES FOR AIR BLOWN FIBRE MICRODUCT, TYPE 1, FOR CATEGORY S & A |
| I.S. EN 61758-1:2008 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - INTERFACE STANDARD FOR CLOSURES - PART 1: GENERAL AND GUIDANCE |
| I.S. EN 61753-084-2:2008 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 084-2: NON CONNECTORISED SINGLE-MODE 980/1550 NM WWDM DEVICES FOR CATEGORY C - CONTROLLED ENVIRONMENT |
| I.S. EN 50377-17-1:2013 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 17-1: TYPE FPFT (FACTORY POLISHED FIELD TERMINATED) SIMPLEX CONNECTOR FACTORY TERMINATED WITH EN 60793-2-50 CATEGORY B1.3 FIBRE AND FIELD MOUNTED ONTO IEC 60793-2-50 CATEGORY B1.3 OR B6A1 OR B6A2 SINGLEMODE FIBRE, CATEGORY C |
| I.S. EN 50377-8-8:2007 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-8: LSH-APC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE CATEGORY U |
| I.S. EN 61753-143-2:2013 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 143-2: OPTICAL PASSIVE VIPA-BASED DISPERSION COMPENSATOR OF SINGLE-MODE FIBRE TRANSMISSION FOR CATEGORY C - CONTROLLED ENVIRONMENT (IEC 61753-143-2:2012 (EQV)) |
| CEI EN 62134-1 : 2011 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CLOSURES - PART 1: GENERIC SPECIFICATION |
| CEI EN 61753-088-2 : 2014 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 088-2: NON CONNECTORISED SINGLE-MODE FIBRE OPTIC LAN WDM DEVICES WITH CHANNEL SPACING OF 800 GHZ FOR CATEGORY C - CONTROLLED ENVIRONMENT |
| I.S. EN 61753-382-2:2016 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 382-2: NON-CONNECTORIZED SINGLE-MODE BIDIRECTIONAL G-PON-NGA WWDM DEVICES FOR CATEGORY C - CONTROLLED ENVIRONMENT |
| I.S. EN 50377-15-1:2011 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 15-1: TYPE MPO WITH 12-FIBRE PPS FERRULES TERMINATED ON IEC 60793-2 CATEGORY A1A MULTIMODE FIBRE FOR 50/125 MICRON MULTIMODE FIBRE |
| I.S. EN 61274-1:2012 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - ADAPTORS FOR FIBRE OPTIC CONNECTORS - PART 1: GENERIC SPECIFICATION (IEC 61274-1:2011 (EQV)) |
| I.S. EN 50377-4-4:2011 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 4-4: TYPE SC-PC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE CATEGORY U |
| I.S. EN 60794-2-51:2014 | OPTICAL FIBRE CABLES - PART 2-51: INDOOR CABLES - DETAIL SPECIFICATION FOR SIMPLEX AND DUPLEX CABLES FOR USE IN CORDS FOR CONTROLLED ENVIRONMENT |
| I.S. EN 61753-087-2:2011 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 087-2: NON-CONNECTORIZED SINGLE-MODE BIDIRECTIONAL 1310 NM UPSTREAM AND 1490 NM DOWNSTREAM WWDM DEVICES FOR CATEGORY C - CONTROLLED ENVIRONMENT |
| I.S. EN 61755-3-8:2009 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CONNECTOR OPTICAL INTERFACES - PART 3-8: OPTICAL INTERFACE, 2,5 MM AND 1,25 MM DIAMETER CYLINDRICAL 8 DEGREES ANGLED-APC COMPOSITE FERRULE USING TITANIUM AS FIBRE SURROUNDING MATERIAL, SINGLE MODE FIBRE |
| I.S. EN 50377-14-1:2011 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 14-1: CORDS WITH IEC 60793-2-50 SINGLEMODE CATEGORY B1.1 AND B1.3 FIBRE FOR CATEGORY C |
| I.S. EN 61300-2-12:2009 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-12: TESTS - IMPACT |
| I.S. EN 50377-3-1:2008 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-1: TYPE SG TERMINATED ON IEC 60793-2-10 CATEGORY A1A, A1B OR EQUIVALENT MULTIMODE FIBRE FOR CATEGORY C |
| I.S. EN 50411-6-1:2011 | FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 6-1: UNPROTECTED MICRODUCT FOR CATEGORY S AND A |
| EN 61755-3-6:2006/A1:2012 | Fibre optic connector optical interfaces - Part 3-6: Optical interface - 2,5 mm and 1,25 mm diameter cylindrical 8 degrees angled-PC composite ferrule using Cu-Ni-alloy as fibre surrounding material, single mode fibre |
| EN 50516-1-1:2011/AC:2012 | INDUSTRIAL CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE CONTROL AND COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 1-1: TYPE SC-RJ PC INDUSTRIAL TERMINATED ON EN 60793-2-10 CATEGORY A1A AND A1B MULTIMODE FIBRE TO MEET THE REQUIREMENTS OF CATEGORY I (INDUSTRIAL ENVIRONMENTS) AS SPECIFIED IN IEC 61753-1-3 |
| EN 61753-088-2:2013 | Fibre optic interconnecting devices and passive components -Performance standard - Part 088-2: Non-connectorized single-mode fibre optic LAN WDM devices with channel spacing of 800 GHz for category C - Controlled environments |
| EN 50411-2-8:2009 | Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 2-8: Microduct connectors, for air blown optical fibres, Type 1 |
| EN 61753-121-3 : 2010 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 121-3: SIMPLEX AND DUPLEX CORDS WITH SINGLE-MODE FIBRE AND CYLINDRICAL FERRULE CONNECTORS FOR CATEGORY U - UNCONTROLLED ENVIRONMENT |
| EN 50377-14-1:2011 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 14-1: Cords with IEC 60793-2-50 singlemode category B1.1 and B1.3 fibre for category C |
| EN 50377-16-1:2011 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 16-1: Type LF3 APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre with titanium composite ferrule for category C |
| EN 50377-6-2:2007 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 6-2: SC-RJ single mode terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, category U |
| EN 61753-381-6:2016 | Fibre optic interconnecting devices and passive components - Performance standard - Part 381-6: Cyclic arrayed waveguide grating - Category O (uncontrolled environment) |
| EN 61754-24-11:2009 | Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 24-11: Type SC-RJ connectors with protective housings based on IEC 61076-3-117 |
| EN 61753-053-2:2014 | Fibre optic interconnecting devices and passive components - Performance standard - Part 053-2: Non-connectorized single-mode fibre, electrically controlled, variable optical attenuator for category C - Controlled environments |
| EN 50411-2:2008 | Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 2: General and guidance for optical fibre cable joint closures, protected microduct closures, and microduct connectors |
| EN 50411-6-1:2011 | Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 6-1: Unprotected microduct for category S and A |
| EN 61300-2-37:2016 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-37: Tests - Cable bending for fibre optic closures |
| EN 61753-089-2:2013 | Fibre optic interconnecting devices and passive components - Performance standard - Part 089-2: Non-connectorized single-mode bidirectional OTDR monitoring WWDM devices for category C - Controlled environment |
| EN 62343-2:2014 | Dynamic modules - Part 2: Reliability qualification |
| EN 50377-8-11:2010 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 8-11: Type LSH-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre with titanium composite ferrule for category C |
| EN 50377-7-4:2011 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 7-4: LC-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre with full zirconia ferrule for category C |
| EN 61300-2-44:2013 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-44: Tests - Flexing of the strain relief of fibre optic devices |
| EN 50551-2:2013 | Simplex and duplex cables to be used for cords - Part 2: Detailed specification and minimum requirements for a 3,0 mm simplex ruggedised single mode fibre cable to be used for patchcords/cords category U |
| EN 61274-1:2012 | Fibre optic interconnecting devices and passive components - Adaptors for fibre optic connectors - Part 1: Generic specification |
| EN 62005-9-1:2015 | Fibre optic interconnecting devices and passive components - Reliability - Part 9-1: Qualification of passive optical components |
| EN 61753-381-2:2016 | Fibre optic interconnecting devices and passive components - Performance standard - Part 381-2: Cyclic arrayed waveguide grating - Category C (controlled environment) |
| EN 50377-4-4:2011 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 4-4: Type SC-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U |
| EN 61753-021-6:2008 | Fibre optic interconnecting devices and passive components performance standard - Part 021-6: Grade B/2 single-mode fibre optic connectors for category O - Uncontrolled environment |
| EN 50411-2-10:2015 | Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 2-10: Sealed fibre splice closures type 2, category G, for FTTH optical distribution networks |
| EN 50516-3-1:2014 | Industrial connector sets and interconnect components to be used in optical fibre control and communication systems - Product specifications - Part 3-1: Type ODVA APC terminated on EN 60793-2-50 category B1.1 and B1.3 singlemode fibre to meet the requirements of category I (industrial environments) as specified in EN 50173-1 and IEC 61753-1-3 |
| EN 61753-087-2:2011 | Fibre optic interconnecting devices and passive components - Performance standard - Part 087-2: Non-connectorized single-mode bidirectional 1310 nm upstream and 1490 nm downstream WWDM devices for category C - Controlled environment |
| CLC/TR 50378-2-2:2008 | Passive components to be used in optical fibre communication systems - Product specifications - Part 2-2: SC(SC2)-APC connector-type fixed optical attenuators using IEC 60793-2 Category B1.1 singlemode fibre |
| EN 50377-3-1:2008 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 3-1: Type SG terminated on IEC 60793-2-10 category A1a, A1b or equivalent multimode fibre for category C |
| EN 50377-17-1 : 2013 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 17-1: TYPE FPFT (FACTORY POLISHED FIELD TERMINATED) SIMPLEX CONNECTOR FACTORY TERMINATED WITH EN 60793-2-50 CATEGORY B1.3 FIBRE AND FIELD MOUNTED ONTO IEC 60793-2-50 CATEGORY B1.3 OR B6A1 OR B6A2 SINGLEMODE FIBRE, CATEGORY C |
| CLC/TR 50378-2-1 : 2008 | PASSIVE COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-1: SC(SC2)-PC CONNECTOR-TYPE FIXED OPTICAL ATTENUATORS USING IEC 60793-2 CATEGORY B1.1 SINGLEMODE FIBRE |
| EN 50377-8-13:2010 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 8-13: Type LSH-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre with titanium composite ferrule for category U |
| EN 61755-3-2:2009 | Fibre optic connector optical interfaces - Part 3-2: Optical interface, 2,5 mm and 1,25 mm diameter cylindrical full zirconia ferrules for 8 degrees angled-PC single mode fibres |
| EN 50377-10-1:2007 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 10-1: Type MU-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category C |
| EN 61300-2-12:2009 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-12: Tests - Impact |
| EN 61755-3-31:2015 | Fibre optic interconnecting devices and passive components - Connector optical interfaces - Part 3-31: Connector parameters of non-dispersion shifted single mode physically contacting fibres - Angled polyphenylene sulphide rectangular ferrules |
| EN 50411-2-5:2009 | Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 2-5: Sealed closures for air blown fibre microduct, type 1, for category S & A |
| EN 50411-3-3 : 2011 | FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-3: SINGLEMODE OPTICAL FIBRE FUSION SPLICE PROTECTORS |
| EN 61753-1-3:2014 | Fibre optic interconnecting devices and passive components - Performance standard - Part 1-3: General and guidance for single-mode fibre optic connector and cable assembly for industrial environment, Category I |
| EN 61753-041-2:2014 | Fibre optic interconnecting devices and passive components - Performance standard - Part 041-2: Non-connectorized single-mode OTDR reflecting device for category C - Controlled environment |
| EN 50411-2-2:2012 | Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 2-2: Sealed pan fibre splice closures Type 1, for category S & A |
| EN 60794-2-51:2014 | Optical fibre cables - Part 2-51: Indoor cables - Detail specification for simplex and duplex cables for use in cords for controlled environment |
| EN 50411-2-4:2012 | Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 2-4: Sealed dome fibre splice closures Type 1, for category S & A |
| EN 50377-8-8:2007 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 8-8: LSH-APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U |
| IEC GUIDE 109:2012 | Environmental aspects - Inclusion in electrotechnical product standards |
| EN 61300-2-5:2011 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-5: Tests - Torsion |
| IEC 61300-2-45:1999 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-45: Tests - Durability test by water immersion |
| EN 61300-2-18:2005 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-18: Tests - Dry heat - High temperature endurance |
| IEC 61300-3-28:2012 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-28: Examinations and measurements - Transient loss |
| EN 61300-2-1:2009 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-1: Tests - Vibration (sinusoidal) |
| IEC 60068-1:2013 | Environmental testing - Part 1: General and guidance |
| EN 61300-2-10:2012 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-10: TESTS - CRUSH RESISTANCE (IEC 61300-2-10:2012) |
| EN 61300-3-4:2013 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-4: Examinations and measurements - Attenuation |
| EN 61300-2-17:2011 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-17: Tests - Cold |
| IEC 61300-2-50:2007 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-50: Tests - Fibre optic connector proof test with static load - Singlemode and multimode |
| IEC 60590:1977 | Determination of the aromatic hydrocarbon content of new mineral insulating oils |
| IEC 61300-2-37:2016 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-37: Tests - Cable bending for fibre optic closures |
| EN 61300-2-37:2016 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-37: Tests - Cable bending for fibre optic closures |
| EN 61300-2-23:2011 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-23: Tests - Sealing for non-pressurized closures of fibre optic devices |
| EN 61300-2-2:2009/corrigendum:2009 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-2: TESTS - MATING DURABILITY |
| IEC 61300-2-48:2009 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-48: Tests - Temperature-humidity cycling |
| EN 61300-2-21:2010 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-21: Tests - Composite temperature/humidity cyclic test |
| IEC 61300-3-3:2009 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-3: Examinations and measurements - Active monitoring of changes in attenuation and return loss |
| IEC 61300-2-1:2009 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-1: Tests - Vibration (sinusoidal) |
| IEC 61300-2-12:2009 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-12: Tests - Impact |
| IEC 61300-2-51:2007 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-51: Tests - Fibre optic connector test for transmission with applied tensile load - Singlemode and multimode |
| EN 61300-2-6:2011 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-6: Tests - Tensile strength of coupling mechanism |
| EN 61300-2-50:2007/AC:2015 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-50: TESTS - FIBRE OPTIC CONNECTOR PROOF TEST WITH STATIC LOAD - SINGLEMODE AND MULTIMODE (IEC 61300-2-50:2007) |
| EN 61300-3-3:2009 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-3: Examinations and measurements - Active monitoring of changes in attenuation and return loss |
| IEC 61300-2-23:2010 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-23: Tests - Sealing for non-pressurized closures of fibre optic devices |
| IEC 61300-2-11:2012 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-11: Tests - Axial compression |
| IEC 61300-2-9:2017 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-9: Tests - Shock |
| EN 61300-2-38:2006 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-38: Tests - Sealing for pressurized fibre optic closures |
| IEC 61300-2-49:2007 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-49: Tests - Connector installation test |
| EN 61300-2-49:2007 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-49: Tests - Connector installation test |
| HD 382 : 200S1 | DETERMINATION OF THE AROMATIC HYDROCARBON CONTENT OF NEW MINERAL INSULATING OILS |
| EN 61300-2-22:2007 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-22: Tests - Change of temperature |
| EN 61300-2-44:2013 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-44: Tests - Flexing of the strain relief of fibre optic devices |
| IEC 61300-2-21:2009 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-21: Tests - Composite temperature/humidity cyclic test |
| IEC 61300-2-17:2010 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-17: Tests - Cold |
| IEC 61300-2-46:2006 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-46: Tests - Damp heat, cyclic |
| IEC 61300-2-5:2009 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-5: Tests - Torsion |
| EN 61300-2-11:2013 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-11: Tests - Axial compression |
| EN 61300-2-28:2013 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-28: TESTS - INDUSTRIAL ATMOSPHERE (SULPHUR DIOXIDE) |
| IEC 61300-3-34:2009 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-34: Examinations and measurements - Attenuation of random mated connectors |
| EN 61300-2-51:2007/AC:2015 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-51: TESTS - FIBRE OPTIC CONNECTOR TEST FOR TRANSMISSION WITH APPLIED TENSILE LOAD - SINGLEMODE AND MULTIMODE |
| IEC 61300-2-26:2006 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-26: Tests - Salt mist |
| IEC 61300-2-38:2006 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-38: Tests - Sealing for pressurized fibre optic closures |
| EN 61300-2-33:2012 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-33: Tests - Assembly and disassembly of fibre optic mechanical splices, fibre management systems and closures |
| EN 61300-2-34:2009 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-34: Tests - Resistance to solvents and contaminating fluids of interconnecting components and closures |
| IEC 61300-2-18:2005 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-18: Tests - Dry heat - High temperature endurance |
| IEC 61300-2-22:2007 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-22: Tests - Change of temperature |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| IEC 61300-3-6:2008 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-6: Examinations and measurements - Return loss |
| EN 61300-3-6:2009 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-6: Examinations and measurements - Return loss |
| IEC 61300-2-7:2013 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-7: Tests - Bending moment |
| EN 61300-2-12:2009 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-12: Tests - Impact |
| IEC 61300-3-4:2012 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-4: Examinations and measurements - Attenuation |
| IEC 61300-2-34:2009 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-34: Tests - Resistance to solvents and contaminating fluids of interconnecting components and closures |
| EN 61300-2-45:1999 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-45: Tests - Durability test by water immersion |
| EN 61300-2-4:1997 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-4: Tests - Fibre/cable retention |
| IEC 61300-2-42:2014 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-42: Tests - Static side load for strain relief |
| EN 61300-3-28:2012 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-28: Examinations and measurements - Transient loss |
| IEC 61300-2-33:2012 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-33: Tests - Assembly and disassembly of fibre optic mechanical splices, fibre management systems and closures |
| IEC 61300-2-44:2013 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-44: Tests - Flexing of the strain relief of fibre optic devices |
| IEC 61300-2-2:2009 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-2: Tests - Mating durability |
| IEC 61300-2-4:1995 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-4: Tests - Fibre/cable retention |
| EN 60529:1991/AC:2016-12 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
| EN 61300-2-42:2014 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-42: Tests - Static side load for strain relief |
| IEC 61300-2-19:2012 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-19: Tests - Damp heat (steady state) |
| EN 61300-2-19:2013 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-19: Tests - Damp heat (steady state) |
| IEC 61300-2-6:2010 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-6: Tests - Tensile strength of coupling mechanism |
| EN 61300-3-34:2009 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-34: Examinations and measurements - Attenuation of random mated connectors |
| EN 61300-2-26:2007 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-26: Tests - Salt mist |
| EN 61300-2-7:2013 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-7: Tests - Bending moment |
| IEC 61300-2-10:2012 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-10: Tests - Crush resistance |
| EN 61300-2-48:2009 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-48: Tests - Temperature-humidity cycling |
| EN 61300-2-9:2017 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-9: Tests - Shock |
| EN 61300-2-46:2006 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-46: Tests - Damp heat cyclic |
| IEC 61300-2-27:1995 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-27: Tests - Dust - Laminar flow |
| EN 61300-2-27:1997 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-27: Tests - Dust - Laminar flow |
| IEC 61300-2-28:2013 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-28: Tests - Corrosive atmosphere (sulphur dioxide) |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.