EN ISO 15614-3:2008
Current
The latest, up-to-date edition.
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 3: Fusion welding of non-alloyed and low-alloyed cast irons (ISO 15614-3:2008)
03-15-2008
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Welding processes
5 Preliminary welding procedure specification
6 Welding procedure test
7 Test piece
7.1 General
7.2 Shape and dimensions of test piece
7.3 Welding of test piece
8 Examination and testing
8.1 Extent of testing
8.2 Location and taking of test specimens
8.3 Non-destructive testing
8.4 Destructive tests
8.5 Acceptance criteria
8.6 Re-testing
9 Range of qualification
9.1 General
9.2 Qualification related to the manufacturer
9.3 Qualification related to the material
9.4 Qualification common to all welding procedures
9.5 Qualification specific to processes
10 Welding procedure qualification record form
Annex A (informative) - Welding procedure qualification
record form
Bibliography
ISO 15614-3:2008 specifies how a preliminary welding procedure specification (pWPS) for production and repair welding of non-alloyed and low-alloyed cast irons is qualified by fusion welding procedure tests.ISO 15614-3:2008 defines the conditions for execution of the welding procedure tests and the range of qualification for welding procedures for all practical welding operations within the range of a defined list of variables.ISO 15614-3:2008 is applicable to all new welding procedures. However, it does not invalidate previous welding procedure tests made to former national standards or specifications. Where additional tests have to be carried out to make the qualification technically equivalent, it is only necessary to do the additional tests on a test piece made in accordance with ISO 15614-3:2008.Additional tests may be required by application standards.ISO 15614-3:2008 is applicable to welding non-alloyed and low-alloyed grey cast iron castings according to: EN 1561; EN 1562; EN 1563; and EN 1564.The principles of ISO 15614-3:2008 are also applicable for welding cast iron to steel or to other unalloyed and low-alloyed cast iron materials.
| Committee |
CEN/TC 121
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| UNE-EN ISO 15614-3:2009 | Identical |
| NS EN ISO 15614-3 : 1ED 2008 | Identical |
| DIN EN ISO 15614-3 E : 2008 | Identical |
| ISO 15614-3:2008 | Identical |
| UNI EN ISO 15614-3 : 2008 | Identical |
| BS EN ISO 15614-3:2008 | Identical |
| NBN EN ISO 15614-3 : 2008 | Identical |
| I.S. EN ISO 15614-3:2008 | Identical |
| SS-EN ISO 15614-3:2008 | Identical |
| SN EN ISO 15614-3 : 2008 | Identical |
| NF EN ISO 15614-3 : 2008 | Identical |
| PN EN ISO 15614-3 : 2009 | Identical |
| NEN EN ISO 15614-3 : 2008 | Identical |
| DIN EN ISO 15614-3:2008-06 | Identical |
| I.S. EN 287-6:2010 | QUALIFICATION TEST OF WELDERS - FUSION WELDING - PART 6: CAST IRON |
| EN 1559-3:2011 | Founding - Technical conditions of delivery - Part 3: Additional requirements for iron castings |
| 16/30336476 DC : 0 | BS EN 287-6 - QUALIFICATION TEST OF WELDERS - FUSION WELDING - PART 6: CAST IRON |
| EN 13445-6 : 2014 COR 2017 | UNFIRED PRESSURE VESSELS - PART 6: REQUIREMENTS FOR THE DESIGN AND FABRICATION OF PRESSURE VESSELS AND PRESSURE PARTS CONSTRUCTED FROM SPHEROIDAL GRAPHITE CAST IRON |
| I.S. EN 13445-6:2014 | UNFIRED PRESSURE VESSELS - PART 6: REQUIREMENTS FOR THE DESIGN AND FABRICATION OF PRESSURE VESSELS AND PRESSURE PARTS CONSTRUCTED FROM SPHEROIDAL GRAPHITE CAST IRON |
| DIN EN 1559-3:2012-01 | Founding - Technical conditions of delivery - Part 3: Additional requirements for iron castings |
| I.S. EN 1559-3:2011 | FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 3: ADDITIONAL REQUIREMENTS FOR IRON CASTINGS |
| BIS IS 16003 : 2012 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - GENERAL RULES |
| SN EN ISO 15611 : 2004 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - QUALIFICATION BASED ON PREVIOUS WELDING EXPERIENCE (ISO 15611:2003) |
| PREN 287-6 : DRAFT 2016 | QUALIFICATION TEST OF WELDERS - FUSION WELDING - PART 6: CAST IRON |
| DIN EN 287-6:2016-03 (Draft) | QUALIFICATION TEST OF WELDERS - FUSION WELDING - PART 6: CAST IRON |
| UNI EN 1559-3 : 2011 | FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 3: ADDITIONAL REQUIREMENTS FOR IRON CASTINGS |
| 13/30274230 DC : 0 | BS EN 13445-6:2009/A1 - UNFIRED PRESSURE VESSELS - REQUIREMENTS FOR THE DESIGN AND FABRICATION OF PRESSURE VESSELS AND PRESSURE PARTS CONSTRUCTED FROM SPHEROIDAL GRAPHITE CAST IRON |
| BS EN 13445-6 : 2014 | UNFIRED PRESSURE VESSELS - PART 6: REQUIREMENTS FOR THE DESIGN AND FABRICATION OF PRESSURE VESSELS AND PRESSURE PARTS CONSTRUCTED FROM SPHEROIDAL GRAPHITE CAST IRON |
| UNI EN 287-6 : 2010 | QUALIFICATION TEST OF WELDERS - FUSION WELDING - PART 6: CAST IRON |
| EN 287-6:2018 | Qualification test of welders - Fusion welding - Part 6: Cast irons |
| UNE-EN 1559-3:2012 | Founding - Technical conditions of delivery - Part 3: Additional requirements for iron castings |
| BS EN 1559-3:2011 | Founding. Technical conditions of delivery Additional requirements for iron castings |
| EN 10002-1 : 2001 | METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT AMBIENT TEMPERATURE |
| EN 1564:2011 | Founding - Ausferritic spheroidal graphite cast irons |
| ISO 15614-13:2012 | Specification and qualification of welding procedures for metallic materials Welding procedure test Part 13: Upset (resistance butt) and flash welding |
| ISO 15620:2000 | Welding Friction welding of metallic materials |
| EN 1321:1996 | Destructive tests on welds in metallic materials - Macroscopic and microscopic examination of welds |
| ISO/TR 15608:2017 | Welding Guidelines for a metallic materials grouping system |
| EN 1011-1:2009 | Welding - Recommendations for welding of metallic materials - Part 1: General guidance for arc welding |
| EN 1562:2012 | Founding - Malleable cast irons |
| ISO 783:1999 | Metallic materials Tensile testing at elevated temperature |
| ISO 15609-1:2004 | Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 1: Arc welding |
| ISO 15611:2003 | Specification and qualification of welding procedures for metallic materials — Qualification based on previous welding experience |
| EN 1563:2011 | Founding - Spheroidal graphite cast irons |
| ISO 14175:2008 | Welding consumables — Gases and gas mixtures for fusion welding and allied processes |
| ISO 15609-2:2001 | Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 2: Gas welding |
| ISO 15613:2004 | Specification and qualification of welding procedures for metallic materials Qualification based on pre-production welding test |
| ISO 4063:2009 | Welding and allied processes — Nomenclature of processes and reference numbers |
| ISO 15607:2003 | Specification and qualification of welding procedures for metallic materials General rules |
| EN 571-1:1997 | Non destructive testing - Penetrant testing - Part 1: General principles |
| EN 970:1997 | Non-destructive examination of fusion welds - Visual examination |
| ISO 6947:2011 | Welding and allied processes Welding positions |
| EN 1561:2011 | Founding - Grey cast irons |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.