|
EN 10002-1 : 2001
|
METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT AMBIENT TEMPERATURE |
|
EN 50266-2-4 : 2001 COR 2002
|
COMMON TEST METHODS FOR CABLES UNDER FIRE CONDITIONS - TEST FOR VERTICAL FLAME SPREAD OF VERTICALLY- MOUNTED BUNCHED WIRES OR CABLES - PART 2-4: PROCEDURES - CATEGORY C |
|
IEC 60811-3-1 : 1.0
|
COMMON TEST METHODS FOR INSULATING AND SHEATHING MATERIALS OF ELECTRIC CABLES - METHODS SPECIFIC TO PVC COMPOUNDS - PRESSURE TEST AT HIGH TEMPERATURE - TESTS FOR RESISTANCE TO CRACKING |
|
HD 622 : 1996 AMD 2 2005
|
POWER CABLES HAVING RATED VOLTAGES FROM 3,6/6(7,2) KV UP TO AND INCLUDING 20,8/36(42) KV WITH SPECIAL FIRE PERFORMANCE FOR USE IN POWER STATIONS |
|
HD 627 : S1 AMD 2 2005
|
MULTICORE AND MULTIPAIR CABLES FOR INSTALLATION ABOVE AND BELOW GROUND |
|
IEC 60228 : 3.0
|
CONDUCTORS OF INSULATED CABLES |
|
IEC 60811-4-1 : 2.0
|
INSULATING AND SHEATHING MATERIALS OF ELECTRIC AND OPTICAL CABLES - COMMON TEST METHODS - PART 4-1: METHODS SPECIFIC TO POLYETHYLENE AND POLYPROPYLENE COMPOUNDS - RESISTANCE TO ENVIRONMENTAL STRESS CRACKING - MEASUREMENT OF THE MELT FLOW INDEX - CARBON BLACK AND/OR MINERAL FILLER CONTENT MEASUREMENT IN POLYETHYLENE BY DIRECT COMBUSTION - MEASUREMENT OF CARBON BLACK CONTENT BY |
|
IEC 60502-2 : 3.0EN+(REDLINE+VERSION)
|
POWER CABLES WITH EXTRUDED INSULATION AND THEIR ACCESSORIES FOR RATED VOLTAGES FROM 1 KV (U[M] = 1,2 KV) UP TO 30 KV (U[M] = 36 KV) - PART 2: CABLES FOR RATED VOLTAGES FROM 6 KV (U[M] = 7,2 KV) UP TO 30 KV (U[M] = 36 KV) |
|
EN 10244-2 : 2009
|
STEEL WIRE AND WIRE PRODUCTS - NON-FERROUS METALLIC COATINGS ON STEEL WIRE - PART 2: ZINC OR ZINC ALLOY COATINGS |
|
IEC 60502-1 : 2009 (CON ED) 2.1
|
POWER CABLES WITH EXTRUDED INSULATION AND THEIR ACCESSORIES FOR RATED VOLTAGES FROM 1 KV (U[M] = 1,2 KV) UP TO 30 KV (U[M] = 36 KV) - PART 1: CABLES FOR RATED VOLTAGES OF 1 KV (U[M] = 1,2 KV) AND 3 KV (U[M] = 3,6 KV) |
|
EN 60811-3-2 : 95 AMD 2 2004
|
INSULATING AND SHEATHING MATERIALS OF ELECTRIC AND OPTICAL CABLES - COMMON TEST METHODS - PART 3-2: METHODS SPECIFIC TO PVC COMPOUNDS - LOSS OF MASS TEST - THERMAL STABILITY TEST |
|
HD 620 : 2010
|
DISTRIBUTION CABLES WITH EXTRUDED INSULATION FOR RATED VOLTAGES FROM 3,6/6 (7,2) KV UP TO AND INCLUDING 20,8/36 (42) KV |
|
IEC 60672-3 : 2.0
|
CERAMIC AND GLASS-INSULATING MATERIALS - SPECIFICATIONS FOR INDIVIDUAL MATERIALS |
|
IEC 60885-3 : 2.0EN+(REDLINE+VERSION)
|
ELECTRICAL TEST METHODS FOR ELECTRIC CABLES - PART 3: TEST METHODS FOR PARTIAL DISCHARGE MEASUREMENTS ON LENGTHS OF EXTRUDED POWER CABLES |
|
EN 60228 : 2005 COR 2005
|
CONDUCTORS OF INSULATED CABLES |
|
EN 50356 : 2002
|
METHOD FOR SPARK TESTING OF CABLES |
|
HD 603 : S1 AMD 3 2007
|
DISTRIBUTION CABLES OF RATED VOLTAGE 0,6/1 KV |
|
EN 60672-3 : 1997
|
CERAMIC AND GLASS-INSULATING MATERIALS - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS |
|
EN 60811-3-1 : 95 AMD 2 2001
|
INSULATING AND SHEATHING MATERIALS OF ELECTRIC CABLES - COMMON TEST METHODS - METHODS SPECIFIC TO PVC COMPOUNDS - PRESSURE TEST AT HIGH TEMPERATURE - TESTS FOR RESISTANCE TO CRACKING |
|
HD 626 : S1 AMD 2 2002
|
OVERHEAD DISTRIBUTION CABLES OF RATED VOLTAGE U[O]/U(U[M]): 0,6/1 (1,2) KV |
|
IEC 60230 : 1.0
|
IMPULSE TESTS ON CABLES AND THEIR ACCESSORIES |
|
EN 61034-2 : 2005 AMD 1 2013
|
MEASUREMENT OF SMOKE DENSITY OF CABLES BURNING UNDER DEFINED CONDITIONS - PART 2: TEST PROCEDURE AND REQUIREMENTS (IEC 61034-2:2005/A1:2013) |
|
IEC 60811-1-2 : 1.0
|
COMMON TEST METHODS FOR INSULATING AND SHEATHING MATERIALS OF ELECTRIC CABLES - PART 1: METHODS FOR GENERAL APPLICATION - SECTION TWO: THERMAL AGEING METHODS |
|
EN 60584-1 : 2013
|
THERMOCOUPLES - PART 1: EMF SPECIFICATIONS AND TOLERANCES (IEC 60584-1:2013) |
|
IEC 60672-2 : 2.0
|
CERAMIC AND GLASS INSULATING MATERIALS - PART 2: METHODS OF TEST |
|
EN 61034-1 : 2005 AMD 1 2014
|
MEASUREMENT OF SMOKE DENSITY OF CABLES BURNING UNDER DEFINED CONDITIONS - PART 1: TEST APPARATUS (IEC 61034-1:2005/A1:2013) |
|
EN 60811-4-1 : 2004
|
INSULATING AND SHEATHING MATERIALS OF ELECTRIC AND OPTICAL CABLES - COMMON TEST METHODS - PART 4-1: METHODS SPECIFIC TO POLYETHYLENE AND POLYPROPYLENE COMPOUNDS - RESISTANCE TO ENVIRONMENTAL STRESS CRACKING - MEASUREMENT OF THE MELT FLOW INDEX - CARBON BLACK AND/OR MINERAL FILLER CONTENT MEASUREMENT IN POLYETHYLENE BY DIRECT COMBUSTION - MEASUREMENT OF CARBON BLACK CONTENT |
|
EN 60811-1-2 : 95 AMD 2 2000
|
INSULATING AND SHEATHING MATERIALS OF ELECTRIC CABLES - COMMON TEST METHODS - GENERAL APPLICATION - THERMAL AGEING METHODS |
|
IEC 60811-1-1 : 2.1
|
COMMON TEST METHODS FOR INSULATING AND SHEATHING MATERIALS OF ELECTRIC CABLES AND OPTICAL CABLES - PART 1-1: METHODS FOR GENERAL APPLICATION - MEASUREMENT OF THICKNESS AND OVERALL DIMENSIONS - TESTS FOR DETERMINING THE MECHANICAL PROPERTIES |
|
EN 60885-3 : 2015
|
ELECTRICAL TEST METHODS FOR ELECTRIC CABLES - PART 3: TEST METHODS FOR PARTIAL DISCHARGE MEASUREMENTS ON LENGTHS OF EXTRUDED POWER CABLES (IEC 60885-3:2015) |
|
EN 60811-2-1 : 98 AMD 1 2001
|
INSULATING AND SHEATHING MATERIALS OF ELECTRIC CABLES - COMMON TEST METHODS - PART 2-1: METHODS SPECIFIC TO ELASTOMERIC COMPOUNDS - OZONE RESISTANCE, HOT SET AND MINERAL OIL IMMERSION TESTS |
|
EN 60230 : 2002
|
IMPULSE TESTS ON CABLES AND THEIR ACCESSORIES |
|
IEC 60811-1-4 : 1.0
|
INSULATING AND SHEATHING MATERIALS OF ELECTRIC CABLES - COMMON TEST METHODS - PART 1-4: GENERAL APPLICATION - TESTS AT LOW TEMPERATURE |
|
EN 50414 : 2006
|
TEST METHODS FOR ANALYSIS OF LEAD IN PVC TAKEN FROM INSULATION AND SHEATH OF ELECTRIC AND OPTICAL FIBRE CABLES - METHOD A: TOTAL LEAD CONTENT DETERMINATION WITH FLAME EXCITATION ATOMIC ABSORPTION SPECTROMETRY - METHOD B: QUALITATIVE ANALYSIS OF LEAD BY LEAD SULPHIDE STAINING |
|
ISO 48 : 2010
|
RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF HARDNESS (HARDNESS BETWEEN 10 IRHD AND 100 IRHD) |
|
IEC 60811-2-1 : 2.1
|
INSULATING AND SHEATHING MATERIALS OF ELECTRIC CABLES - COMMON TEST METHODS - PART 2-1: METHODS SPECIFIC TO ELASTOMERIC COMPOUNDS - OZONE RESISTANCE, HOT SET AND - MINERAL OIL IMMERSION TESTS |
|
IEC 61034-2 : 3.1
|
MEASUREMENT OF SMOKE DENSITY OF CABLES BURNING UNDER DEFINED CONDITIONS - PART 2: TEST PROCEDURE AND REQUIREMENTS |
|
IEC 60584-1 : 3.0
|
THERMOCOUPLES - PART 1: EMF SPECIFICATIONS AND TOLERANCES |
|
IEC 60811-3-2 : 1.0
|
COMMON TEST METHODS FOR INSULATING AND SHEATHING MATERIALS OF ELECTRIC CABLES - METHODS SPECIFIC TO PVC COMPOUNDS - LOSS OF MASS TEST - THERMAL STABILITY TEST |
|
EN 60672-2 : 2000
|
CERAMIC AND GLASS INSULATING MATERIALS - PART 2: METHODS OF TEST |
|
IEC 61034-1 : 3.1
|
MEASUREMENT OF SMOKE DENSITY OF CABLES BURNING UNDER DEFINED CONDITIONS - PART 1: TEST APPARATUS |
|
EN 60811-1-1 : 95 AMD 1 2001
|
INSULATING AND SHEATHING MATERIALS OF ELECTRIC CABLES - COMMON TEST METHODS - GENERAL APPLICATION - MEASUREMENT OF THICKNESS AND OVERALL DIMENSIONS - TESTS FOR DETERMINING MECHANICAL PROPERTIES |
|
HD 604 : S1 AMD 3 2005
|
0.6/1 KV POWER CABLES WITH SPECIAL FIRE PERFORMANCE FOR USE IN POWER STATIONS |
|
EN 60811-1-4 : 95 AMD 2 2001
|
INSULATING AND SHEATHING MATERIALS OF ELECTRIC CABLES - COMMON TEST METHODS - PART 1-4: GENERAL APPLICATION - TESTS AT LOW TEMPERATURE |