• There are no items in your cart

IEC 60454-2:2007

Current
Current

The latest, up-to-date edition.

Pressure-sensitive adhesive tapes for electrical purposes - Part 2: Methods of test
Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Published date

06-21-2007

FOREWORD
1 Scope
2 Normative references
3 Conditioning and specimen preparation
4 Determination of thickness
   4.1 Test apparatus
   4.2 Test specimens
   4.3 Procedure
   4.4 Results
5 Determination of width
   5.1 Method A
   5.2 Method B
   5.3 Method C
6 Determination of roll length
   6.1 Principle
   6.2 Method A - Measurement of turns method
   6.3 Method B - Length sensor method
7 Corrosion-related properties
   7.1 General
   7.2 Preparation of water extract for pH and conductivity
        determinations
   7.3 Determination of pH value of water extract
   7.4 Determination of conductivity of water extract
   7.5 Detection of corrosive sulfur
   7.6 Insulation resistance method
   7.7 Visual method
   7.8 Wire tensile strength method
8 Tensile strength and elongation at break
   8.1 Apparatus
   8.2 Test specimens
   8.3 Procedure
   8.4 Results
9 Low-temperature properties
   9.1 Principle
   9.2 Test specimen
   9.3 Procedure
   9.4 Flexibility
   9.5 Electric strength
   9.6 Results
10 Resistance to penetration at elevated temperatures
   10.1 Apparatus
   10.2 Test specimens
   10.3 Procedure
   10.4 Results
11 Adhesion
   11.1 Principle
   11.2 Materials
   11.3 Apparatus
   11.4 Test samples and test pieces
   11.5 Procedure
   11.6 Expression of results
12 Adhesion to backing at low temperatures
   12.1 Test specimens
   12.2 Procedure
   12.3 Results
13 Shear adhesion to backing after liquid immersion
   13.1 Apparatus
   13.2 Test specimens
   13.3 Procedure
   13.4 Results
14 Curing properties of thermosetting adhesive tapes
   14.1 Bond separation during thermal treatment (adhesive
        to backing)
   14.2 Bond separation after thermal treatment (adhesion
        to backing)
15 Flagging tests
   15.1 Principle
   15.2 Apparatus
   15.3 Test specimens
   15.4 Preparation of specimens for test
   15.5 Test conditions
   15.6 Results
16 Water vapor permeability
   16.1 Apparatus
   16.2 Test specimens
   16.3 Procedure
   16.4 Results
17 Electric strength
   17.1 General
   17.2 Test specimens
   17.3 Procedure
   17.4 Results
18 Electric strength after humid conditioning
19 Resistance to flame propagation
   19.1 Principle
   19.2 Apparatus
   19.3 Test specimen
   19.4 Procedure
   19.5 Results
20 Flame test
   20.1 Principle
   20.2 Apparatus
   20.3 Preparation of test specimen
   20.4 Procedure
   20.5 Results
21 Thermal endurance
   21.1 Determination of thermal endurance (based on
        IEC 60216-1 and IEC 60216-2)
   21.2 Voltage breakdown
   21.3 Loss of mass
Annex A (normative) Rollers to be used in various tests
Bibliography

IEC 60454-2:2007 specifies methods of test for pressure-sensitive adhesive tapes for electrical purposes. This revision includes improved text regarding the flame test (Clause 20), the improved text on adhesion (Clause 11) and a new Figures 9a and 9b.

Committee
TC 15
DevelopmentNote
Supersedes IEC 60454-2A (03/2001) Stability Date: 2025. (09/2017)
DocumentType
Standard
Pages
41
PublisherName
International Electrotechnical Committee
Status
Current
Supersedes

NF EN 60454 3-2 : 2006 PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 2: REQUIREMENTS FOR POLYESTER FILM TAPES WITH RUBBER THERMOSETTING, RUBBER THERMOPLASTIC OR ACRYLIC CROSSLINKED ADHESIVES
CEI EN 60454-3-11 : 2008 PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 11: POLYESTER FILM COMBINATIONS WITH GLASS FILAMENT, CREPED CELLULOSIC PAPER, POLYESTER NON-WOVEN, EPOXY AND PRESSURESENSITIVE ADHESIVES
NF EN 60454 3-16 : 2003 PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 16: POLYESTER FILM/GLASS FILAMENT COMBINATIONS WITH PRESSURE-SENSITIVE ADHESIVE
DIN EN ISO 20567-3:2013-04 PAINTS AND VARNISHES - DETERMINATION OF STONE-CHIP RESISTANCE OF COATINGS - PART 3: SINGLE-IMPACT TEST WITH A FREE-FLYING IMPACT BODY (ISO 20567-3:2012)
I.S. EN 60674-2:2017 SPECIFICATION FOR PLASTIC FILMS FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST
BS ISO/IEC 24789-2:2011 Identification cards. Card service life Methods of evaluation
CSA ISO/IEC 15457-3 : 2009 : R2014 IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 3: TEST METHODS
NF EN 60454 3-5 : 1998 PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 5: CELLULOSIC PAPER, NON CREPED, WITH RUBBER THERMOSETTING ADHESIVE
IEC 60454-3-1:1998+AMD1:2001 CSV Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: PVC film tapes with pressure-sensitive adhesive
VDE 0340-3-5 : 1999 PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - SPECIFICATIONS FOR INDIVIDUAL MATERIALS; CELLULOSIC PAPER, NON-CREPED, WITH RUBBER THERMOSETTING ADHESIVE
BS EN 60454-3-1:1998 Specifications for pressure-sensitive adhesive tapes for electrical purposes. Specifications for individual materials PVC film tapes with pressure-sensitive adhesive
05/30127512 DC : DRAFT JAN 2005 IEC 60454-3-4 ED 3 - PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS
15/30294124 DC : 0 BS EN 60674-2 ED 2.0 - SPECIFICATION FOR PLASTIC FILMS FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST
06/30159593 DC : 0 BS ISO/IEC 15457-3 - IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 3: TEST METHODS
PREN 13523-13 : DRAFT 2012 COIL COATED METALS - TEST METHODS - PART 13: RESISTANCE TO ACCELERATED AGEING BY THE USE OF HEAT
CEI EN 60454-3-8 : 2006 PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 8: WOVEN FABRIC TAPES WITH PRESSURE-SENSITIVE ADHESIVE BASED ON GLASS, CELLULOSE ACETATE ALONE OR COMBINED WITH VISCOSE FIBRE
I.S. EN 60454-3-12:2006 PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 12: REQUIREMENTS FOR POLYETHYLENE AND POLYPROPYLENE FILM TAPES WITH PRESSURE SENSITIVE ADHESIVE
BS EN 60454-3-14:2002 Specifications for pressure-sensitive adhesive tapes for electrical purposes. Specifications for individual materials Polytetrafluoroethylene film tapes with pressure-sensitive adhesive. - Sheet 14: Polytetrafluoroethylene film tapes with pressure-sensitive adhesive.
BS ISO 20567-1 : 2005 AMD 16853 PAINTS AND VARNISHES - DETERMINATION OF STONE-CHIP RESISTANCE OF COATINGS - PART 1: MULTI-IMPACT TESTING
BS ISO 20567-2 : 2005 AMD 16852 PAINTS AND VARNISHES - DETERMINATION OF STONE-CHIP RESISTANCE OF COATINGS - PART 2: SINGLE-IMPACT TEST WITH A GUIDED IMPACT BODY
02/123757 DC : DRAFT OCT 2002 ISO 20567-2 - PAINTS AND VARNISHES - DETERMINATION OF STONE CHIP RESISTANCE OF COATINGS - PART 2: SINGLE IMPACT TEST
CEI EN 60454-3-6 : 1999 PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 3-6: SPECIFICATIONS FOR INDIVIDUAL MATERIALS SHEET 6: POLYCARBONATE FILM TAPES WITH ACRYLIC THERMOPLASTIC ADHESIVE
CEI EN 60454-3-2 : 2006 PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 3-2: SPECIFICATIONS FOR INDIVIDUAL MATERIALS SHEET 2: REQUIREMENTS FOR POLYESTER FILM TAPES WITH RUBBER THERMOSETTING, RUBBER THERMOPLASTIC OR ACRYLIC CROSSLINKED ADHESIVES
IEC 60454-3-10:1995 Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 10: Requirements for cellulose-acetate-butyrate film tapes with rubber thermosetting adhesive
CEI EN 60426 : 2007 ELECTRICAL INSULATING MATERIALS - DETERMINATION OF ELECTROLYTIC CORROSION CAUSED BY INSULATING MATERIALS - TEST METHODS
CEI EN 60454-3-7 : 1999 PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 7: POLYIMIDE FILM TAPES WITH PRESSURE-SENSITIVE ADHESIVE
BS EN 60454-3-2:2006 Pressure-sensitive adhesive tapes for electrical purposes Specifications for individual materials - Requirements for polyester film tapes with rubber thermosetting, rubber thermoplastic or acrylic crosslinked adhesives
BS EN 60454-3-12:2006 Pressure-sensitive adhesive tapes for electrical purposes Specifications for individual materials - Requirements for polyethylene and polypropylene film tapes with pressure sensitive adhesive
ISO/IEC 24789-2:2011 Identification cards — Card service life — Part 2: Methods of evaluation
IEC 60454-3-13:1995 Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 13: Requirements for combined cellulose-viscose woven fabric tapes, one side covered with a thermoplastic material, the other side with rubber thermosetting adhesive
IEC 60454-3-3:1998 Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 3: Polyester film tapes with rubber thermoplastic adhesive
NF EN 60454 3-6 : 1998 PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 6: POLYCARBONATE FILM TAPES WITH ACRYLIC THERMOPLASTIC ADHESIVE
VDE 0340-3-8 : 2006 COR 1 2007 PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 8: WOVEN FABRIC TAPES WITH PRESSURE-SENSITIVE ADHESIVE BASED ON GLASS, CELLULOSE ACETATE ALONE OR COMBINED WITH VISCOSE FIBRE
VDE 0340-3-7 : 1999 PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - SPECIFICATIONS FOR INDIVIDUAL MATERIALS; POLYIMIDE FILM TAPES WITH PRESSURE-SENSITIVE ADHESIVE
ISO 22779:2006 Metallic coatings — Physical vapour-deposited coatings of aluminium — Specification and test methods
DIN EN ISO 8502-3:2014-06 (Draft) PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - TESTS FOR THE ASSESSMENT OF SURFACE CLEANLINESS - PART 3: ASSESSMENT OF DUST ON STEEL SURFACES PREPARED FOR PAINTING (PRESSURE-SENSITIVE TAPE METHOD) (ISO 8502-3:2017)
BS EN 13523-13:2014 Coil coated metals. Test methods Resistance to accelerated ageing by the use of heat
IEC 60454-3-18:2003 Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 18: Polypropylene film tapes with pressure-sensitive adhesive
BS EN 13523-8:2017 Coil coated metals. Test methods Resistance to salt spray (fog)
IEC 60454-3-19:2003 Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 19: Tapes made from various backing materials with pressure-sensitive adhesive on both sides
IEC 60454-3-4:2007 Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 4: Cellulose paper, creped and non-creped, with rubber thermosetting adhesive
EN 60454-3-4:2007 PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 4: CELLULOSE PAPER, CREPED AND NON-CREPED, WITH RUBBER THERMOSETTING ADHESIVE
EN 60454-3-17:2001 Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 17: Polyester/epoxy combinations with pressure-sensitive adhesive
EN 13523-5:2014 Coil coated metals - Test methods - Part 5: Resistance to rapid deformation (impact test)
EN 60454-3-12:2006 Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 12: Requirements for polyethylene and polypropylene film tapes with pressure sensitive adhesive
EN 60454-3-6:1998 Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 6: Polycarbonate film tapes with acrylic thermoplastic adhesive
EN 13523-9:2014 Coil coated metals - Test methods - Part 9: Resistance to water immersion
EN 60454-3-16:2003 Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 16: Polyester film/glass filament combinations with pressure-sensitive adhesive
EN 13523-13:2014 Coil coated metals - Test methods - Part 13: Resistance to accelerated ageing by the use of heat
EN 13523-14:2014 Coil coated metals - Test methods - Part 14: Chalking (Helmen method)
EN 60454-3-9:1998 Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 9: Cellulose acetate woven fabric tapes with rubber thermosetting adhesive
EN 60454-3-19:2003 Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 19: Tapes made from various backing materials with pressure-sensitive adhesive on both sides
EN 13523-8:2017 Coil coated metals - Test methods - Part 8: Resistance to salt spray (fog)
BS EN 60426:2007 Electrical insulating materials. Determination of electrolytic corrosion caused by insuating materials. Test methods
DIN EN 60454-3-10 : 1997 PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS; SHEET 10: REQUIREMENTS FOR CELLULOSE-ACETATE-BUTYRATE FILM TAPES WITH RUBBER THERMOSETTING ADHESIVE
BS ISO 22778:2006 Metallic coatings. Physical vapour-deposited coatings of cadmium on iron and steel. Specification and test methods
BS EN ISO 20567-3:2012 Paints and varnishes. Determination of stone-chip resistance of coatings Single-impact test with a free-flying impact body
12/30268967 DC : 0 BS EN 13523-14 - COIL COATED METALS - TEST METHODS - PART 14: CHALKING (HELMEN METHOD)
11/30217720 DC : 0 BS EN ISO 20567-3 - PAINTS AND VARNISHES - DETERMINATION OF STONE-CHIP RESISTANCE OF COATINGS - PART 3: SINGLE-IMPACT TEST WITH A FREE-FLYING IMPACT BODY
I.S. EN 60454-3-19:2003 PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 19: TAPES MADE FROM VARIOUS BACKING MATERIALS WITH PRESSURE-SENSITIVE ADHESIVE ON BOTH SIDES
I.S. EN 60454-3-18:2003 SPECIFICATIONS FOR PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - SPECIFICATIONS FOR INDIVIDUAL MATERIALS - POLYPROPYLENE FILM TAPES WITH PRESSURE-SENSITIVE ADHESIVE
VDE 0340-3-9 : 1999 PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - SPECIFICATIONS FOR INDIVIDUAL MATERIALS; CELLULOSE ACETATE WOVEN FABRIC TAPES WITH RUBBER THERMOSETTING ADHESIVE
BS EN 60454-3-18:2003 Specifications for pressure-sensitive adhesive tapes for electrical purposes. Specifications for individual materials
PREN 13523-8 : DRAFT 2016 COIL COATED METALS - TEST METHODS - PART 8: RESISTANCE TO SALT SPRAY (FOG)
05/30136157 DC : DRAFT JUL 2005
NF EN 60454 3-1 : 1998 AMD 1 2010 PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 1: PVC FILM TAPES WITH PRESSURE-SENSITIVE ADHESIVE
12/30268958 DC : 0 BS EN 13523-5 - COIL COATED METALS - TEST METHODS - PART 5: RESISTANCE TO RAPID DEFORMATION (IMPACT TEST)
BS EN 60454-3-6:1998 Specifications for pressure-sensitive adhesive tapes for electrical purposes. Specifications for individual materials Polycarbonate film tapes with acrylic thermoplastic adhesive
BS EN 60454-3-7:1998 Specifications for pressure-sensitive adhesive tapes for electrical purposes. Specifications for individual materials Polyimide film tapes with pressure-sensitive adhesive
CEI EN 60454-3-14 : 2002 PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 14: POLYTETRAFLUOROETHYLENE FILM TAPES WITH PRESSURE SENSITIVE ADHESIVE
CEI EN 60454-3-4 : 2008 PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 3-4: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 4: CELLULOSE PAPER, CREPED AND NON-CREPED, WITH RUBBER THERMOSETTING ADHESIVE
CEI EN 60454-3-12 : 2006 PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 12: REQUIREMENTS FOR POLYETHYLENE AND POLYPROPYLENE FILM TAPES WITH PRESSURE SENSITIVE ADHESIVE
I.S. EN 60454-3-9:1999 PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 9: CELLULOSE ACETATE WOVEN FABRIC TAPES WITH RUBBER THERMOSETTING ADHESIVE
BS EN 60454-3-4:2007 Pressure-sensitive adhesive tapes for electrical purposes Specifications for individual materials - Cellulose paper, creped and non-creped, with rubber thermosetting adhesive
CAN/CSA-ISO/IEC 10373-2:16 Identification cards - Test methods - Part 2: Cards with magnetic stripes (Adopted ISO/IEC 10373-2:2015, third edition, 2015-01-15)
NF EN 60454 3-9 : 1998 PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 9: CELLULOSE ACETATE WOVEN FABRIC TAPES WITH RUBBER THERMOSETTING ADHESIVE
NF EN 60454 3-19 : 2003 PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 19: TAPES MADE FROM VARIOUS BACKING MATERIALS WITH PRESSURE-SENSITIVE ADHESIVE ON BOTH SIDES
I.S. EN 60454-3-3:1999 PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - SPECIFICATIONS FOR INDIVIDUAL MATERIALS - POLYESTER FILM TAPES WITH RUBBER THERMOPLASTIC ADHESIVE
PREN 13523-7 : DRAFT 2012 COIL COATED METALS - TEST METHODS - PART 7: RESISTANCE TO CRACKING ON BENDING (T-BEND TEST)
ISO 22778:2006 Metallic coatings — Physical vapour-deposited coatings of cadmium on iron and steel — Specification and test methods
IEC 60674-2:2016 Specification for plastic films for electrical purposes - Part 2: Methods of test
I.S. EN 60454-3-10:1999 PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 10: REQUIREMENTS FOR CELLULOSE-ACETATE-BUTYRATE FILM TAPES WITH RUBBER THERMOSETTING ADHESIVE
EN 60454-3-13:1995 Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 13: Requirements for combined cellulose-viscose woven fabric tapes, one side covered with a thermoplastic material, the other side with rubber thermosetting adhesive
IEC 60454-3-9:1998 Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 9: Cellulose acetate woven fabric tapes with rubber thermosetting adhesive
DIN EN 14354:2005-03 WOOD-BASED PANELS - WOOD VENEER FLOOR COVERINGS
UNE-EN ISO 8502-3:2017 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method) (ISO 8502-3:2017)
I.S. EN 13523-5:2014 COIL COATED METALS - TEST METHODS - PART 5: RESISTANCE TO RAPID DEFORMATION (IMPACT TEST)
I.S. EN 13523-7:2014 COIL COATED METALS - TEST METHODS - PART 7: RESISTANCE TO CRACKING ON BENDING (T-BEND TEST)
I.S. EN 13523-8:2017 COIL COATED METALS - TEST METHODS - PART 8: RESISTANCE TO SALT SPRAY (FOG)
I.S. EN 13523-13:2014 COIL COATED METALS - TEST METHODS - PART 13: RESISTANCE TO ACCELERATED AGEING BY THE USE OF HEAT
I.S. EN 14354:2017 WOOD-BASED PANELS - WOOD VENEER FLOOR COVERINGS
I.S. EN ISO 8502-3:2017 PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - TESTS FOR THE ASSESSMENT OF SURFACE CLEANLINESS - PART 3: ASSESSMENT OF DUST ON STEEL SURFACES PREPARED FOR PAINTING (PRESSURE-SENSITIVE TAPE METHOD) (ISO 8502-3:2017)
I.S. EN 13523-14:2014 COIL COATED METALS - TEST METHODS - PART 14: CHALKING (HELMEN METHOD)
I.S. EN 13523-9:2014 COIL COATED METALS - TEST METHODS - PART 9: RESISTANCE TO WATER IMMERSION
I.S. EN 13858:2006 CORROSION PROTECTION OF METALS - NON-ELECTROLYTICALLY APPLIED ZINC FLAKE COATINGS ON IRON OR STEEL COMPONENTS
VDE 0340-3-12 : 2007 PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 12: REQUIREMENTS FOR POLYETHYLENE AND POLYPROPYLENE FILM TAPES WITH PRESSURE SENSITIVE ADHESIVE
DIN EN 60454-3-5 : 1999 PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS; SHEET 5: CELLULOSIC PAPER, NON-CREPED, WITH RUBBER THERMOSETTING ADHESIVE
DIN EN 60454-3-7 : 1999 PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS; SHEET 7: POLYIMIDE FILM TAPES WITH PRESSURE-SENSITIVE ADHESIVE
DIN EN 60454-3-6 : 1999 PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS; SHEET 6: POLYCARBONATE FILM TAPES WITH ACRYLIC THERMOSETTING ADHESIVE
VDE 0340-3-10 : 1997 PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - SPECIFICATIONS FOR INDIVIDUAL MATERIALS; REQUIREMENTS FOR CELLULOSE-ACETATE-BUTYRATE FILM TAPES WITH RUBBER THERMOSETTING ADHESIVE
VDE 0340-3-3 : 1999 PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - SPECIFICATIONS FOR INDIVIDUAL MATERIALS; POLYESTER FILM TAPES WITH RUBBER THERMOPLASTIC ADHESIVE
VDE 0340-3-6 : 1999 PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - SPECIFICATIONS FOR INDIVIDUAL MATERIALS; POLYCARBONATE FILM TAPES WITH ACRYLIC THERMOSETTING ADHESIVE
BS 5691-2:1995 Guide for the determination of thermal endurance properties of electrical insulating materials Choice of test criteria
BS 8423:2002 Fireguards for fires and heating appliances for domestic use. Specification
BS ISO 17334:2008 Metallic and other inorganic coatings. Autocatalytic nickel over autocatalytic copper for electromagnetic shielding
DIN EN 13523-8:2016-07 (Draft) COIL COATED METALS - TEST METHODS - PART 8: RESISTANCE TO SALT SPRAY (FOG)
BS EN 60454-3-5:1998 Specifications for pressure-sensitive adhesive tapes for electrical purposes. Specifications for individual materials Cellulosic paper, non-creped, with rubber thermosetting adhesive
04/301990 DC : DRAFT JAN 2004 IEC 60454-3-8 ED.3 - PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 8: GLASS FABRIC WITH PRESSURE-SENSITIVE ADHESIVE
16/30340560 DC : 0 BS EN 13523-8 - COIL COATED METALS - TEST METHODS - PART 8: RESISTANCE TO SALT SPRAY (FOG)
13/30269784 DC : 0 BS ISO/IEC 10373-2 - IDENTIFICATION CARDS - TEST METHODS - PART 2: CARDS WITH MAGNETIC STRIPES
VDE 0340-3-2 : 2006 PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 2: REQUIREMENTS FOR POLYESTER FILM TAPES WITH RUBBER THERMOSETTING, RUBBER THERMOPLASTIC OR ACRYLIC CROSSLINKED ADHESIVES
BS EN 60454-3-16:2003 Specifications for pressure-sensitive adhesive tapes for electrical purposes. Specifications for individual materials Polyester film/glass filament combinations with pressure-sensitive adhesive
12/30268964 DC : 0 BS EN 13523-9 - COIL COATED METALS - TEST METHODS - PART 9: RESISTANCE TO WATER IMMERSION
NF EN 60454 3-7 : 1998 PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 7: POLYIMIDE FILM TAPES WITH PRESSURE-SENSITIVE ADHESIVE
04/302041 DC : DRAFT JAN 2004 IEC 60454-3-2 ED.2 - PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATION FOR INDIVIDUAL MATERIALS - SHEET 2: POLYESTER FILM TAPES WITH RUBBER THERMOSETTING OR ACRYLIC CROSSLINKED ADHESIVES
CEI EN 60454-3-19 : 2004 PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 19: TAPES MADE FROM VARIOUS BACKING MATERIALS WITH PRESSURE-SENSITIVE ADHESIVE ON BOTH SIDES
NF EN 60454-3-14 : 2003 PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 14: POLYTETRAFLUOROETHYLENE FILM TAPES WITH PRESSURE-SENSITIVE ADHESIVE
NF EN 60454 3-3 : 1998 PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 3: POLYESTER FILM TAPES RUBBER THERMOPLASTIC ADHESIVE
05/30127517 DC : DRAFT JAN 2005 IEC 60454-3-11 ED 2 - PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS
DIN EN ISO 17132:2008-01 PAINTS AND VARNISHES - T-BEND TEST
02/100466 DC : DRAFT MAR 2002 PREN 14354 - WOOD-BASED PANELS - WOOD VENEER FLOOR COVERING
04/301991 DC : DRAFT JAN 2004 IEC 60454-3-12 ED.2 - PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 12: POLYETHYLENE FILM TAPES WITH PRESSURE-SENSITIVE ADHESIVE
BS EN 60454-3-3:1998 Specifications for pressure-sensitive adhesive tapes for electrical purposes. Specifications for individual materials Polyester film tapes with rubber thermoplastic adhesive
CSA ISO/IEC 15457-3:09 (R2019) Identification cards - Thin flexible cards - Part 3: Test methods (Adopted ISO/IEC 15457-3:2008, second edition, 2008-03-01)
NF EN 60454 3-12 : 2006 PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 12: REQUIREMENTS FOR POLYETHYLENE AND POLYPROPYLENE FILM TAPES WITH PRESSURE SENSITIVE ADHESIVES
I.S. EN 60454-3-8:1999 PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - SPECIFICATIONS FOR INDIVIDUAL MATERIALS - GLASS FABRIC WITH PRESSURE-SENSITIVE ADHESIVE
NF EN 60454-3-15 : 2003 PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 15: POLYESTER FILM/POLYESTER NON-WOVEN COMBINATIONS WITH RUBBER THERMOSETTING ADHESIVE
I.S. EN 60454-3-4:2007 PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 4: CELLULOSE PAPER, CREPED AND NON-CREPED, WITH RUBBER THERMOSETTING ADHESIVE
PREN 13523-5 : DRAFT 2012 COIL COATED METALS - TEST METHODS - PART 5: RESISTANCE TO RAPID DEFORMATION (IMPACT TEST)
DIN EN 13523-14:2014-08 Coil coated metals - Test methods - Part 14: Chalking (Helmen method)
ISO 17132:2007 Paints and varnishes T-bend test
IEC 60454-3-16:2003 Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 16: Polyester film/glass filament combinations with pressure-sensitive adhesive
I.S. EN 13523-6:2002 COIL COATED METALS - TEST METHODS - PART 6: ADHESION AFTER INDENTATION (CUPPING TEST)
EN 13523-6:2002 Coil coated metals - Test methods - Part 6: Adhesion after indentation (cupping test)
EN 60674-2:2017/AC:2018-01 SPECIFICATION FOR PLASTIC FILMS FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST (IEC 60674-2:2016/COR1:2017)
EN 14354:2017 Wood-based panels - Wood veneer floor coverings
EN ISO 17132:2007 Paints and varnishes - T-bend test (ISO 17132:2007)
UNI EN 13523-14 : 2014 COIL COATED METALS - TEST METHODS - PART 14: CHALKING (HELMEN METHOD)
UNI EN 13523-13 : 2014 COIL COATED METALS - TEST METHODS - PART 13: RESISTANCE TO ACCELERATED AGEING BY THE USE OF HEAT
UNI EN 13523-5 : 2014 COIL COATED METALS - TEST METHODS - PART 5: RESISTANCE TO RAPID DEFORMATION (IMPACT TEST)
I.S. EN ISO 20567-3:2012 PAINTS AND VARNISHES - DETERMINATION OF STONE-CHIP RESISTANCE OF COATINGS - PART 3: SINGLE-IMPACT TEST WITH A FREE-FLYING IMPACT BODY (ISO 20567-3:2012)
06/30148614 DC : 0 EN ISO 17132 - PAINTS AND VARNISHES - T-BEND TEST
BS ISO/IEC 10373-2:2015 Identification cards. Test methods Cards with magnetic stripes
I.S. EN 60454-3-16:2003 SPECIFICATIONS FOR PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - SPECIFICATIONS FOR INDIVIDUAL MATERIALS - POLYESTER FILM/GLASS FILAMENT COMBINATIONS WITH PRESSURE-SENSITIVE ADHESIVE
BS EN 60454-3-11:2007 Pressure-sensitive adhesive tapes for electrical purposes Specifications for individual materials - Polyester film combinations with glass filament, creped cellulosic paper, polyester non-woven, epoxy and pressure-sensitive adhesives
BS EN 60454-3-19:2003 Specifications for pressure-sensitive adhesive tapes for electrical purposes. Specifications for individual materials Tapes made from various backing materials with pressure-sensitive adhesive on both sides - Sheet 19: Tapes made from various backing materials with pressure-sensitive adhesive on both sides
BS EN 60454-3-17:2002 Specifications for pressure-sensitive adhesive tapes for electrical purposes. Specifications for individual materials Polyester/epoxy combinations with pressure-sensitive adhesive
I.S. EN 60454-3-2:2006 PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 2: REQUIREMENTS FOR POLYESTER FILM TAPES WITH RUBBER THERMOSETTING, RUBBER THERMOPLASTIC OR ACRYLIC CROSSLINKED ADHESIVES
BS ISO/IEC 15457-3:2008 Identification cards. Thin flexible cards Test methods
I.S. EN 60454-3-13:1999 PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 13: REQUIREMENTS FOR COMBINED CELLULOSE-VISCOSE WOVEN FABRIC TAPES, ONE SIDE RECOVERED WITH THERMOPLASTIC MATERIAL, THE OTHER SIDE WITH RUBBER THERMOSETTING ADHESIVE
BS 5691-2:1979 Guide for the determination of thermal endurance properties of electrical insulating materials List of materials and available tests
INCITS/ISO/IEC 15457-3 : 2002 : R2007 IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 3: TEST METHODS
I.S. EN 60454-3-11:2007 PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 11: POLYESTER FILM COMBINATIONS WITH GLASS FILAMENT, CREPED CELLULOSIC PAPER, POLYESTER NON-WOVEN, EPOXY AND PRESSURE-SENSITIVE ADHESIVES
INCITS/ISO/IEC 15457-3 : 2002 IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 3: TEST METHODS
UNE-EN ISO 20567-3:2013 Paints and varnishes - Determination of stone-chip resistance of coatings - Part 3: Single-impact test with a free-flying impact body (ISO 20567-3:2012)
I.S. EN 60454-3-5:1999 PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 5: CELLULOSIC PAPER, NON-CREPED, WITH RUBBER THERMOSETTING ADHESIVE
I.S. EN 60454-3-7:1999 PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - SPECIFICATIONS FOR INDIVIDUAL MATERIALS - POLYIMIDE FILM TAPES WITH PRESSURE-SENSITIVE ADHESIVE
IEC 60454-3-6:1998 Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 6: Polycarbonate film tapes with acrylic thermoplastic adhesive
BS EN 60674-2:2017+A1:2019 Specification for plastic films for electrical purposes Methods of test
PREN 13523-9 : DRAFT 2012 COIL COATED METALS - TEST METHODS - PART 9: RESISTANCE TO WATER IMMERSION
NF EN 60674-2 : 98 AMD 1 2002 SPECIFICATION FOR PLASTIC FILMS FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST
CEI EN 60454-3-10 : 1996 PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 10: REQUIREMENTS FOR CELLULOSE-ACETATE-BUTYRATE FILM TAPES WITH RUBBER THERMOSETTING ADHESIVE
I.S. EN ISO 17132:2007 PAINTS AND VARNISHES - T-BEND TEST
I.S. EN 60454-3-6:1999 PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 6: POLYCARBONATE FILM TAPES WITH ACRYLIC THERMOPLASTIC ADHESIVE
IEC 60454-3-7:1998 Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 7: Polyimide film tapes with pressure-sensitive adhesive
ISO/IEC 15457-3:2008 Identification cards — Thin flexible cards — Part 3: Test methods
NF EN 13523-6 : 2002 COIL COAT METALS - TEST METHODS - PART 6: ADHESION AFTER INDENTATION (CUPPING TEST)
DIN EN 13523-13:2014-08 COIL COATED METALS - TEST METHODS - PART 13: RESISTANCE TO ACCELERATED AGEING BY THE USE OF HEAT
DIN EN 13523-7:2014-08 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test)
DIN EN 13523-5:2014-08 Coil coated metals - Test methods - Part 5: Resistance to rapid deformation (impact test)
DIN EN 13523-9:2014-08 Coil coated metals - Test methods - Part 9: Resistance to water immersion
BS EN 14354:2017 Wood-based panels. Wood veneer floor coverings
BS EN 13523-5:2014 Coil coated metals. Test methods Resistance to rapid deformation (impact test)
BS EN 13523-6:2002 Coil coated metals. Test methods Adhesion after indentation (cupping test)
BS EN 13858:2006 Corrosion protection of metals. Non-electrolytically applied zinc flake coatings on iron or steel components
IEC 60454-3-2:2006 Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Requirements for polyester film tapes with rubber thermosetting, rubber thermoplastic or acrylic crosslinked adhesives
IEC 60454-3-14:2001 Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 14: Polytetrafluoroethylene film tapes with pressure-sensitive adhesive
UNE-EN 13523-9:2014 Coil coated metals - Test methods - Part 9: Resistance to water immersion
IEC 60426:2007 Electrical insulating materials - Determination of electrolytic corrosion caused by insulating materials - Test methods
IEC 60454-3-8:2006 Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 8 - Woven fabric tapes with pressure-sensitive adhesive based on glass, cellulose acetate alone or combined with viscose fibre
ISO 20567-3:2012 Paints and varnishes — Determination of stone-chip resistance of coatings — Part 3: Single-impact test with a free-flying impact body
IEC 60454-3-11:2007 Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 11: Polyester film combinations with glass filament, creped cellulosic paper, polyester non-woven, epoxy and pressure-sensitive adhesive
ISO 8502-3:2017 Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method)
UNE-EN 14354:2017 Wood-based panels - Wood veneer floor coverings
IEC 60454-3-15:2001 Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 15: Polyester film/polyester non-woven combinations with rubber thermosetting adhesive
UNE-EN 13523-8:2017 Coil coated metals - Test methods - Part 8: Resistance to salt spray (fog)
EN ISO 20567-3:2012 Paints and varnishes - Determination of stone-chip resistance of coatings - Part 3: Single-impact test with a free-flying impact body (ISO 20567-3:2012)
EN 13858:2006 Corrosion protection of metals - Non-electrolytically applied zinc flake coatings on iron or steel components
UNI EN 13523-9 : 2014 COIL COATED METALS - TEST METHODS - PART 9: RESISTANCE TO WATER IMMERSION
EN 753-3 : 1999 IDENTIFICATION CARD SYSTEMS - INTERSECTION THIN FLEXIBLE CARDS - TEST METHODS
EN ISO 8502-3:2017 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method) (ISO 8502-3:2017)
DIN EN 60454-3-13 : 1997 PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS; SHEET 13: REQUIREMENTS FOR COMBINED CELLULOSE-VISCOSE WOVEN FABRIC TAPES, ONE SIDE RECOVERED WITH THERMOPLASTIC MATERIAL, THE OTHER SIDE WITH RUBBER THERMOSETTING ADHESIVE
12/30268961 DC : 0 BS EN 13523-7 - COIL COATED METALS - TEST METHODS - PART 7: RESISTANCE TO CRACKING ON BENDING (T-BEND TEST)
IEC 60454-3-5:1998 Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 5: Cellulosic paper, non-creped, with rubber thermosetting adhesive
BS EN 60454-3-15:2002 Specifications for pressure-sensitive adhesive tapes for electrical purposes. Specifications for individual materials Polyester film/polyester non-woven combinations with rubber thermosetting adhesive
12/30268982 DC : 0 BS EN 13523-13 - COIL COATED METALS - TEST METHODS - PART 13: RESISTANCE TO ACCELERATED AGEING BY THE USE OF HEAT
BS 7079-B3(1993) : 1993 AMD 10701 PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - METHODS FOR THE ASSESSMENT OF SURFACE CLEANLINESS - PART 3: ASSESSMENT OF DUST ON STEEL SURFACES PREPARED FOR PAINTING (PRESSURE-SENSITIVE TAPE METHOD)
ISO 17334:2008 Metallic and other inorganic coatings — Autocatalytic nickel over autocatalytic copper for electromagnetic shielding
NF EN 60454 3-8 : 2006 PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 8: WOVEN FABRIC TAPES WITH PRESSURE-SENSITIVE ADHESIVE BASED ON GLASS, CELLULOSE ACETATE ALONE OR COMBINED WITH VISCOSE FIBRE
NF EN 60454 3-18 : 2003 PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 18: POLYPROPYLENE FILM TAPES WITH PRESSURE-SENSITIVE ADHESIVE
BS EN ISO 17132:2007 Paints and varnishes. T-bend test
14/30250131 DC : 0 BS EN ISO 8502-3 - PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - TESTS FOR THE ASSESSMENT OF SURFACE CLEANLINESS - PART 3: ASSESSMENT OF DUST ON STEEL SURFACES PREPARED FOR PAINTING (PRESSURE-SENSITIVE TAPE METHOD)
I.S. EN 60426:2007 ELECTRICAL INSULATING MATERIALS - DETERMINATION OF ELECTROLYTIC CORROSION CAUSED BY INSULATING MATERIALS - TEST METHODS
01/648266 DC : DRAFT MAY 2001 ISO/IEC FCD 15457-3 - IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 3: TEST METHODS
BS EN 60454-3-8:2006 Pressure-sensitive adhesive tapes for electrical purposes Specifications for individual materials - Woven fabric tapes with pressure-sensitive adhesive based on glass, cellulose acetate alone or combined with viscose fibre
02/123756 DC : DRAFT OCT 2002 ISO 20567-1 - PAINTS AND VARNISHES - DETERMINATION OF STONE CHIP RESISTANCE OF COATINGS - PART 1: MULTI IMPACT TEST
BS ISO 22779:2006 Metallic coatings. Physical vapour-deposited coatings of aluminium. Specification and test methods
CSA ISO/IEC 15457-3 : 2009 IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 3: TEST METHODS
NF EN 60454-3-17 : 2003 PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 17: POLYESTER/EPOXY COMBINATIONS WITH PRESSURE-SENSITIVE ADHESIVE
ISO/IEC 10373-2:2015 Identification cards Test methods Part 2: Cards with magnetic stripes
I.S. EN 60454-3-1:1999 PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - SPECIFICATIONS FOR INDIVIDUAL MATERIALS - PVC FILM TAPES WITH PRESSURE-SENSITIVE ADHESIVE
EN 60454-3-8:2006/corrigendum Dec. 2006 PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 8: WOVEN FABRIC TAPES WITH PRESSURE-SENSITIVE ADHESIVE BASED ON GLASS, CELLULOSE ACETATE ALONE OR COMBINED WITH VISCOSE FIBRE
DIN EN 14354 E : 2017 WOOD-BASED PANELS - WOOD VENEER FLOOR COVERINGS
IEC 60454-3-12:2006 Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 12: Requirements for polyethylene and polypropylene film tapes with pressure sensitive adhesive
BS EN 13523-9:2014 Coil coated metals. Test methods Resistance to water immersion
BS EN 13523-14:2014 Coil coated metals. Test methods Chalking (Helmen method)
BS EN ISO 8502-3:2017 Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanliness Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method)
BS EN 13523-7:2014 Coil coated metals. Test methods Resistance to cracking on bending (T-bend test)
BS EN 753-3:1999 Identification card systems. Intersector thin flexible cards Test methods
IEC 60454-3-17:2001 Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 17: Polyester/epoxy combinations with pressure-sensitive adhesive
EN 13523-7:2014 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test)
EN 60426:2007 Electrical insulating materials - Determination of electrolytic corrosion caused by insulating materials - Test methods
EN 60454-3-11:2007 Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 11: Polyester film combinations with glass filament, creped cellulosic paper, polyester non-woven, epoxy and pressure-sensitive adhesives
UNI EN 13523-7 : 2014 COIL COATED METALS - TEST METHODS - PART 7: RESISTANCE TO CRACKING ON BENDING (T-BEND TEST)
DIN EN ISO 8502-3:2017-05 PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - TESTS FOR THE ASSESSMENT OF SURFACE CLEANLINESS - PART 3: ASSESSMENT OF DUST ON STEEL SURFACES PREPARED FOR PAINTING (PRESSURE-SENSITIVE TAPE METHOD) (ISO 8502-3:2017)
EN 60454-3-3:1998 Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 3: Polyester film tapes with rubber thermoplastic adhesive
EN 60454-3-1:1998/A1:2001 PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - SPECIFICATIONS FOR INDIVIDUAL MATERIALS - PVC FILM TAPES WITH PRESSURE-SENSITIVE ADHESIVE
EN 60454-3-5:1998 Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 5: Cellulosic paper, non-creped, with rubber thermosetting adhesive
EN 60454-3-18:2003 Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 18: Polypropylene film tapes with pressure-sensitive adhesive
EN 60454-3-10 : 1995 PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 10: REQUIREMENTS FOR CELLULOSE-ACETATE-BUTYRATE FILM TAPES WITH RUBBER THERMOSETTING ADHESIVE
EN 60454-3-15:2001 Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 15: Polyester film/polyester non-woven combinations with rubber thermosetting adhesive
DIN EN 14354:2017-11 WOOD-BASED PANELS - WOOD VENEER FLOOR COVERINGS
EN 60454-3-14:2001 Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 14: Polytetrafluoroethylene film tapes with pressure-sensitive adhesive
EN 60454-3-7:1998 Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 7: Polyimide film tapes with pressure-sensitive adhesive
EN 60454-3-2:2006 Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Requirements for polyester film tapes with rubber thermosetting, rubber thermoplastic or acrylic crosslinked adhesives
DIN EN 13858:2007-02 Corrosion protection of metals - Non-electrolytically applied zinc flake coatings on iron or steel components
BS 3900-E6(1992) : 1992 AMD 8353 METHODS OF TEST FOR PAINTS - CROSS CUT TEST
BS 3900-E6(2007) : 2007 PAINTS AND VARNISHES - CROSS-CUT TEST

IEC 60243-1:2013 Electric strength of insulating materials - Test methods - Part 1: Tests at power frequencies
ISO 683-13:1974 Heat-treated steels, alloy steels and free-cutting steels Part 13: Wrought stainless steels
ISO 10093:1998 Plastics Fire tests Standard ignition sources
ISO 383:1976 Laboratory glassware — Interchangeable conical ground joints
IEC 60216-2:2005 Electrical insulating materials - Thermal endurance properties - Part 2: Determination of thermal endurance properties of electrical insulating materials - Choice of test criteria
EN 10088-2:2014 STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
ISO 3071:2005 Textiles Determination of pH of aqueous extract
IEC 60589:1977 Methods of test for the determination of ionic impurities in electrical insulating materials by extraction with liquids
EN 1939 : 2003 SELF ADHESIVE TAPES - DETERMINATION OF PEEL ADHESION PROPERTIES
ISO 468:1982 Surface roughness — Parameters, their values and general rules for specifying requirements
ISO 3599:1976 Vernier callipers reading to 0,1 and 0,05 mm
IEC 60426:2007 Electrical insulating materials - Determination of electrolytic corrosion caused by insulating materials - Test methods
ISO 527-3:1995 Plastics Determination of tensile properties Part 3: Test conditions for films and sheets
ISO 2194:1991 Industrial screens — Woven wire cloth, perforated plate and electroformed sheet — Designation and nominal sizes of openings
IEC 60216-1:2013 Electrical insulating materials - Thermal endurance properties - Part 1: Ageing procedures and evaluation of test results
IEC 60216-3:2006 Electrical insulating materials - Thermal endurance properties - Part 3: Instructions for calculating thermal endurance characteristics

View more information
US$313.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.