ISO 898-5:2012
Current
The latest, up-to-date edition.
Mechanical properties of fasteners made of carbon steel and alloy steel Part 5: Set screws and similar threaded fasteners with specified hardness classes Coarse thread and fine pitch thread
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
French, English
05-30-2012
ISO 898-5:2012 specifies mechanical and physical properties of set screws and similar threaded fasteners made of carbon steel or alloy steel when tested at an ambient temperature range of 10 C to 35 C. Fasteners (the term used when set screws and similar threaded fasteners are considered all together) which conform to the requirements of ISO 898-5:2012 are evaluated at that ambient temperature range.
Fasteners according to ISO 898-5:2012 are classified to specified hardness classes and are intended for use under compressive stress only.
ISO 898-5:2012 is applicable to set screws and similar fasteners:
- made of carbon steel or alloy steel,
- having a triangular ISO metric screw thread according to ISO 68-1,
- with a coarse pitch thread M1,6 to M30, and fine pitch thread M81 to M302,
- with diameter/pitch combinations according to ISO 261 and ISO 262, and
- having thread tolerances according to ISO 965-1 and ISO 965-2.
DevelopmentNote |
Supersedes ISO/DIS 898-5. (06/2012)
|
DocumentType |
Standard
|
Pages |
15
|
PublisherName |
International Organization for Standardization
|
Status |
Current
|
Supersedes |
Standards | Relationship |
GOST ISO 898-5 : 2014 | Identical |
UNE-EN ISO 898-5:2013 | Identical |
NBN EN ISO 898-5 : 2012 | Identical |
NEN EN ISO 898-5 : 2012 | Identical |
NS EN ISO 898-5 : 2012 | Identical |
I.S. EN ISO 898-5:2012 | Identical |
AS 4291.5:2015 | Identical |
PN EN ISO 898-5 : 2012 | Identical |
SN EN ISO 898-5 : 2012 | Identical |
UNI EN ISO 898-5 : 2012 | Identical |
SS-EN ISO 898-5:2012 | Identical |
IS 1367 : Part 5 : 2018 | Identical |
BS EN ISO 898-5:2012 | Identical |
EN ISO 898-5:2012 | Identical |
NF EN ISO 898-5 : 2012 | Identical |
DIN EN ISO 898-5:2012-09 | Identical |
DIN ISO 898-5:1980-09 | Identical |
BS 6104-3:1981 | Identical |
BIS IS 1367-5 : 2002 | Identical |
NFE 25 100 : 1985 | Similar to |
SANS 1700-5-3 : 2ED 2003(R2010) | Identical |
SAC GB/T 3098-3 : 1982 | Identical |
SAC GB/T 3098.3 : 2000 | Identical |
GOST R ISO 898-5 : 2009 | Identical |
DIN EN ISO 4766:2011-11 | Slotted set screws with flat point (ISO 4766:2011) |
DIN ISO 2936:2016-10 | ASSEMBLY TOOLS FOR SCREWS AND NUTS - HEXAGON SOCKET SCREW KEYS (ISO 2936:2014) |
BS ISO 2936:1995 | Assembly tools for screws and nuts. Hexagon socket screw keys |
ISO 2936:2014 | Assembly tools for screws and nuts Hexagon socket screw keys |
NF EN ISO 4766 : 2011 | SLOTTED SET SCREWS WITH FLAT POINT |
I.S. EN ISO 3269:2000 | FASTENERS - ACCEPTANCE INSPECTION |
UNE-EN ISO 898-1:2015 | Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread (ISO 898-1:2013) |
ISO 4029:2003 | Hexagon socket set screws with cup point |
BS EN ISO 4029:2003 | Hexagon socket set screws with cup point |
BS EN ISO 3506-3:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Set screws and similar fasteners not under tensile stress |
DIN EN ISO 4029:2004-05 | Hexagon socket set screws with cup point (ISO 4029:2003) |
EN ISO 4029:2003 | Hexagon socket set screws with cup point (ISO 4029:2003) |
13/30277104 DC : 0 | BS EN 14389-1 - ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 1: ACOUSTICAL CHARACTERISTICS |
IS 1367 : Part 1 : 2014 | TECHNICAL SUPPLY CONDITIONS FOR THREADED STEEL FASTENERS PART 1 GENERAL REQUIREMENTS FOR BOLTS, SCREWS, STUDS AND NUTS<br> |
PREN 14389-2 : DRAFT 2013 | ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTICAL CHARACTERISTICS |
16/30336501 DC : 0 | BS EN 16951-2 - RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTIC CHARACTERISTICS |
ISO 8992:2005 | Fasteners — General requirements for bolts, screws, studs and nuts |
DIN EN ISO 3506-3:2010-04 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress (ISO 3506-3:2009) |
DIN EN ISO 898-1:2013-05 | MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-1:2013) |
BS EN ISO 4027:2003 | Hexagon socket set screws with cone point |
BS EN 14389-1:2015 | Road traffic noise reducing devices. Procedures for assessing long term performance Acoustical characteristics |
I.S. EN 14389-2:2015 | ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTICAL CHARACTERISTICS |
DIN EN 24035:1992-02 | HEXAGON THIN NUTS (CHAMFERED) - PRODUCT GRADES A AND B |
I.S. EN ISO 898-1:2013 | MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-1:2013) |
I.S. EN ISO 3506-3:2009 | MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 3: SET SCREWS AND SIMILAR FASTENERS NOT UNDER TENSILE STRESS |
I.S. EN 14389-1:2015 | ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 1: ACOUSTICAL CHARACTERISTICS |
BS 4168-3:1994 | Hexagon socket screws and wrench keys: metric series Specification for hexagon socket set screws with cone point |
BS 4168-5:1994 | Hexagon socket screws and wrench keys: metric series Specification for hexagon socket set screws with cup point |
BS 4168-2:1994 | Hexagon socket screws and wrench keys: metric series Specification for hexagon socket set screws with flat point |
BS 4168-4:1994 | Hexagon socket screws and wrench keys: metric series Specification for hexagon socket set screws with dog point |
I.S. EN 24035:1992 | HEXAGON THIN NUTS (CHAMFERED) - PRODUCT GRADES A AND B |
I.S. EN ISO 16228:2018 | FASTENERS - TYPES OF INSPECTION DOCUMENTS (ISO 16228:2017) |
PREN 14389-1 : DRAFT 2013 | ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 1: ACOUSTICAL CHARACTERISTICS |
09/30208236 DC : 0 | BS ISO 4766 - SLOTTED SET SCREWS WITH FLAT POINT |
UNI EN ISO 4766 : 2012 | SLOTTED SET SCREWS WITH FLAT POINT |
15/30280562 DC : 0 | BS EN ISO 16228 - FASTENERS - INSPECTION DOCUMENTS |
DIN ISO 8992:2005-09 | Fasteners - General requirements for bolts, screws, studs and nuts (ISO 8992:2005) |
PREN ISO 4766 : DRAFT 2009 | SLOTTED SET SCREWS WITH FLAT POINT |
UNE-EN ISO 4766:2012 | Slotted set screws with flat point (ISO 4766:2011) |
EN ISO 16228:2018 | Fasteners - Types of inspection documents (ISO 16228:2017) |
ISO 4028:2003 | Hexagon socket set screws with dog point |
BS EN ISO 4028:2003 | Hexagon socket set screws with dog point |
BS EN ISO 898-1:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel Bolts, screws and studs with specified property classes. Coarse thread and fine pitch thread |
EN ISO 3269:2000 | FASTENERS - ACCEPTANCE INSPECTION |
UNI EN ISO 898-1 : 2013 | MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD |
UNI EN ISO 3506-3 : 2010 | MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS-STEEL FASTENERS - PART 3: SET SCREWS AND SIMILAR FASTENERS NOT UNDER TENSILE STRESS |
ISO 16228:2017 | Fasteners — Types of inspection documents |
BIS IS 800 : 2007 AMD 1 2012 | GENERAL CONSTRUCTION IN STEEL - CODE OF PRACTICE |
13/30277107 DC : 0 | BS EN 14389-2 - ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTICAL CHARACTERISTICS |
UNE-EN 14389-1:2015 | Road traffic noise reducing devices - Procedures for assessing long term performance - Part 1: Acoustical characteristics |
IS 1367 : Part 3 : 2017 | TECHNICAL SUPPLY CONDITIONS FOR THREADED STEEL FASTENERS - PART 3: MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND BOLTS, SCREWS AND STUDS |
BS EN ISO 16228:2018 | Fasteners. Types of inspection documents |
BS EN ISO 2342:2003 | Slotted headless screws with shank |
BS EN ISO 3269:2001 | Fasteners. Acceptance inspection |
ISO 3269:2000 | Fasteners Acceptance inspection |
ISO 898-1:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread |
BS EN 14389-2:2015 | Road traffic noise reducing devices. Procedures for assessing long term performance Non-acoustical characteristics |
UNE-EN 14389-2:2015 | Road traffic noise reducing devices - Procedures for assessing long term performance - Part 2: Non-acoustical characteristics |
ISO 2342:2003 | Slotted headless screws with shank |
ISO 4766:2011 | Slotted set screws with flat point |
UNE-EN ISO 3506-3:2010 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress (ISO 3506-3:2009) |
ISO 4026:2003 | Hexagon socket set screws with flat point |
ISO 4027:2003 | Hexagon socket set screws with cone point |
DIN EN ISO 4026:2004-05 | Hexagon socket set screws with flat point (ISO 4026:2003) |
DIN EN ISO 4028:2004-05 | Hexagon socket set screws with dog point (ISO 4028:2003) |
EN 24035 : 1991 | HEXAGON THIN NUTS (CHAMFERED) - PRODUCT GRADES A AND B |
EN ISO 898-1:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread (ISO 898-1:2013) |
EN 14389-2:2015 | Road traffic noise reducing devices - Procedures for assessing long term performance - Part 2: Non-acoustical characteristics |
EN ISO 4766:2011 | Slotted set screws with flat point (ISO 4766:2011) |
EN 14389-1:2015 | Road traffic noise reducing devices - Procedures for assessing long term performance - Part 1: Acoustical characteristics |
EN ISO 4027:2003 | Hexagon socket set screws with cone point (ISO 4027:2003) |
EN ISO 4026:2003 | Hexagon socket set screws with flat point (ISO 4026:2003) |
EN ISO 2342:2003 | Slotted headless screws with shank (ISO 2342:2003) |
EN ISO 3506-3:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress (ISO 3506-3:2009) |
EN ISO 4028 : 2003 | Hexagon socket set screws with dog point (ISO 4028:2003) |
BS EN ISO 4766:2011 | Slotted set screws with flat point |
08/30193145 DC : 0 | BS EN ISO 13628-1:2005/AMD 1 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 1: GENERAL REQUIREMENTS AND RECOMMENDATIONS |
PREN 16951-2 : DRAFT 2016 | RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTIC CHARACTERISTICS |
BS ISO 8992:2005 | Fasteners. General requirements for bolts, screws, studs and nuts |
06/30151815 DC : 0 | BS ISO 898-1 - MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS |
I.S. EN ISO 4766:2011 | SLOTTED SET SCREWS WITH FLAT POINT |
UNI ISO 2936 : 2008 | ASSEMBLY TOOLS FOR SCREWS AND NUTS - HEXAGON SOCKET SCREW KEYS |
ISO 3506-3:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Part 3: Set screws and similar fasteners not under tensile stress |
BS EN ISO 4026:2003 | Hexagon socket set screws with flat point |
DIN EN ISO 2342:2004-05 | Slotted headless screws with shank (ISO 2342:2003) |
ISO 6507-1:2005 | Metallic materials Vickers hardness test Part 1: Test method |
ISO 6506-1:2014 | Metallic materials Brinell hardness test Part 1: Test method |
ISO 4042:1999 | Fasteners Electroplated coatings |
ISO 6157-1:1988 | Fasteners — Surface discontinuities — Part 1: Bolts, screws and studs for general requirements |
ISO 6508-1:2016 | Metallic materials — Rockwell hardness test — Part 1: Test method |
ISO 16426:2002 | Fasteners — Quality assurance system |
ISO 965-2:1998 | ISO general purpose metric screw threads — Tolerances — Part 2: Limits of sizes for general purpose external and internal screw threads — Medium quality |
ISO 225:2010 | Fasteners Bolts, screws, studs and nuts Symbols and descriptions of dimensions |
ISO 262:1998 | ISO general purpose metric screw threads — Selected sizes for screws, bolts and nuts |
ISO 68-1:1998 | ISO general purpose screw threads — Basic profile — Part 1: Metric screw threads |
ISO 261:1998 | ISO general purpose metric screw threads General plan |
ISO 965-1:2013 | ISO general purpose metric screw threads — Tolerances — Part 1: Principles and basic data |
ISO 965-3:1998 | ISO general purpose metric screw threads Tolerances Part 3: Deviations for constructional screw threads |
ISO 898-1:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.