|
ONORM EN 1514-2 : 2014
|
FLANGES AND THEIR JOINTS - GASKETS FOR PN-DESIGNATED FLANGES - PART 2: SPIRAL WOUND GASKETS FOR USE WITH STEEL FLANGES
|
|
ONORM EN 1254-5 : 1998
|
COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 5: FITTINGS WITH SHORT ENDS FOR CAPILLARY BRAZING TO COPPER TUBES
|
|
ONORM EN ISO 3506-2 : 2010
|
MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 2: NUTS
|
|
ISO 17672:2016
|
Brazing — Filler metals
|
|
ONORM EN ISO 5817 : 2014
|
WELDING - FUSION-WELDED JOINTS IN STEEL, NICKEL, TITANIUM AND THEIR ALLOYS (BEAM WELDING EXCLUDED) - QUALITY LEVELS FOR IMPERFECTIONS (ISO 5817:2014)
|
|
ISO 15348:2002
|
Pipework Metal bellows expansion joints General
|
|
ISO 3506-1:2009
|
Mechanical properties of corrosion-resistant stainless steel fasteners Part 1: Bolts, screws and studs
|
|
ONORM EN 437 : 2009
|
TEST GASES - TEST PRESSURES - APPLIANCE CATEGORIES
|
|
ONORM EN ISO 6892-1 : 2017
|
METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT ROOM TEMPERATURE (ISO 6892-1:2016)
|
|
ONORM EN 751-3 : 1997 AC 1997
|
SEALING MATERIALS FOR METALLIC THREADED JOINTS IN CONTACT WITH 1ST, 2ND AND 3RD FAMILY GASES AND HOT WATER - PART 3: UNSINTERED PTFE TAPES
|
|
ISO 15610:2003
|
Specification and qualification of welding procedures for metallic materials — Qualification based on tested welding consumables
|
|
ONORM EN ISO 3506-1 : 2010
|
MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 1: BOLTS, SCREWS AND STUDS
|
|
ONORM EN 13480-2 : 2017
|
METALLIC INDUSTRIAL PIPING - PART 2: MATERIALS
|
|
ONORM EN 1555-2 : 2011
|
PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 2: PIPES
|
|
ISO 6892-1:2016
|
Metallic materials Tensile testing Part 1: Method of test at room temperature
|
|
ONORM EN 1563 : 2012
|
FOUNDING - SPHEROIDAL GRAPHITE CAST IRONS
|
|
ONORM EN 1555-3 : 2013
|
PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 3: FITTINGS
|
|
ONORM EN 1254-1 : 1998
|
COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 1: FITTINGS WITH ENDS FOR CAPILLARY SOLDERING OR CAPILLARY BRAZING TO COPPER TUBES
|
|
ONORM EN 12954 : 2001
|
CATHODIC PROTECTION OF BURIED OR IMMERSED METALLIC STRUCTURES - GENERAL PRINCIPLES AND APPLICATION FOR PIPELINES
|
|
ONORM EN 13480-6 : 2017
|
METALLIC INDUSTRIAL PIPING - PART 6: ADDITIONAL REQUIREMENTS FOR BURIED PIPING
|
|
ISO 148-1:2016
|
Metallic materials — Charpy pendulum impact test — Part 1: Test method
|
|
ONORM EN 1254-2 : 1998
|
COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 2: FITTINGS WITH COMPRESSION ENDS FOR USE WITH COPPER TUBES
|
|
ISO 15612:2004
|
Specification and qualification of welding procedures for metallic materials Qualification by adoption of a standard welding procedure
|
|
ONORM EN 1555-1 : 2015
|
PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 1: GENERAL
|
|
ONORM EN 10253-2 : 2008
|
BUTT-WELDING PIPE FITTINGS - PART 2: NON ALLOY AND FERRITIC ALLOY STEELS WITH SPECIFIC INSPECTION REQUIREMENTS
|
|
ISO 5817:2014
|
Welding — Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) — Quality levels for imperfections
|
|
ISO 15614-1:2017
|
Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys
|
|
ISO 15609-1:2004
|
Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 1: Arc welding
|
|
ONORM EN 1555-4 : 2011
|
PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 4: VALVES
|
|
ONORM EN ISO 15609-1 : 2005
|
SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE SPECIFICATION - PART 1: ARC WELDING
|
|
ISO 12944-1:2017
|
Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 1: General introduction
|
|
ISO 9329-2:1997
|
Seamless steel tubes for pressure purposes — Technical delivery conditions — Part 2: Unalloyed and alloyed steels with specified elevated temperature properties
|
|
ONORM EN ISO 15610 : 2004
|
SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - QUALIFICATION BASED ON TESTED WELDING CONSUMABLES
|
|
ONORM EN 10217-1 : 2007
|
WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES
|
|
EN 583-1:1998/A1:2003
|
NON-DESTRUCTIVE TESTING - ULTRASONIC EXAMINATION - GENERAL PRINCIPLES
|
|
ONORM EN ISO 15612 : 2004
|
SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - QUALIFICATION BY ADOPTION OF A STANDARD WELDING PROCEDURE
|
|
ONORM EN 13445-6 : 2017
|
UNFIRED PRESSURE VESSELS - PART 6: REQUIREMENTS FOR THE DESIGN AND FABRICATION OF PRESSURE VESSELS AND PRESSURE PARTS CONSTRUCTED FROM SPHEROIDAL GRAPHITE CAST IRON (EN 13445-6:2014-09, ISSUE 3:2016-07)
|
|
ONORM EN ISO 15607 : 2004
|
SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - GENERAL RULES
|
|
ONORM EN 1555-5 : 2011
|
PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 5: FITNESS FOR PURPOSE OF THE SYSTEM
|
|
EN 10216-1:2013
|
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties
|
|
ONORM EN 10217-7 : 2014
|
WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 7: STAINLESS STEEL TUBES
|
|
ONORM EN 1092-1 : JUL 2014
|
FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES
|
|
ISO 15607:2003
|
Specification and qualification of welding procedures for metallic materials General rules
|
|
ISO 3506-2:2009
|
Mechanical properties of corrosion-resistant stainless steel fasteners Part 2: Nuts
|
|
ONORM EN 12732 : JUL 2014
|
GAS INFRASTRUCTURE - WELDING STEEL PIPEWORK - FUNCTIONAL REQUIREMENTS
|
|
EN 12799:2000/A1:2003
|
BRAZING - NON-DESTRUCTIVE EXAMINATION OF BRAZED JOINTS
|
|
ISO 228-1:2000
|
Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation
|
|
ONORM EN 12068 : 2000
|
CATHODIC PROTECTION - EXTERNAL ORGANIC COATINGS FOR THE CORROSION PROTECTION OF BURIED OR IMMERSED STEEL PIPELINES USED IN CONJUNCTION WITH CATHODIC PROTECTION - TAPES AND SHRINKABLE MATERIALS
|
|
ONORM EN 10216-5 : 2014
|
SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: STAINLESS STEEL TUBES
|
|
ISO 898-1:2013
|
Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread
|
