PPP-B-601 Revision H:1989
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
BOXES, WOOD, CLEATED PLYWOOD
Available format(s)
PDF
Superseded date
02-26-2001
Publisher
Requirements for new wood cleated plywood boxes to be used as containers for general overseas and domestic shipment
| Committee |
FSC 8115
|
| DevelopmentNote |
H Notice 1 - Notice of Cancellation/Superseded by ASTM D 6251/D6251M (09/2001)
|
| DocumentType |
Standard
|
| Pages |
51
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Superseded
|
| SupersededBy |
| MIL-T-17286 Revision D:1989 | TURBINES AND GEARS, SHIPBOARD PROPULSION AND AUXILIARY STEAM, PACKAGING OF |
| MIL-A-43820 Revision B:1981 | AIR LOCK, (MUST) |
| MIL-R-52915 Revision B:1994 | RECHARGE/RECOVERY UNIT, FIRE EXTINGUISHER, MONOBROMOTRIFLUOROMETHANE (CF3BR) PNEUMATIC POWERED |
| SAE AS 8568 : 2012 | BINOCULARS, PRISMATIC, HAND-HELD (FOR AERONAUTICAL USE) (7 X 50 AND 6 X 42 (WIDE FIELD)) |
| MIL-C-47224 Revision B:1993 | COMPOUND, MOLDING, TRANSFER, EPOXY RESIN, SINGLE COMPONENT |
| MIL-C-53052 Base Document:1985 | CONNECTOR, ELECTRICAL, POWER |
| O-F-499 Revision D:1985 | FLUX, BRAZING, (SILVER BRAZING FILLER METAL, LOW MELTING POINT) |
| O-S-602 Revision E:1977 | SODIUM HYPOCHLORITE SOLUTION |
| MIL C 83383 : C | CIRCUIT BREAKER, REMOTE CONTROL THERMAL, TRIP FREE, GENERAL SPECIFICATION FOR |
| MIL-S-52541 Base Document:1966 | SURVEYING SET, TRIANGULATION RECONNAISSANCE, SPECIALISED PACKAGING OF |
| MIL-S-36662 Base Document:1970 | STOPPER, BOTTLE WHITE RUBBER |
| MIL-H-7195 Revision G:1991 | HARDWARE, PARACHUTE, GENERAL SPECIFICATION FOR |
| MIL-T-55309 Base Document:1971 | TEST SET, RADIO FREQUENCY POWER AN/USM-161 ( ) |
| MIL C 38240 : C | COMPUTER, ALTITUDE, ALTITUDE ENCODING CPU 66, GENERAL SPECIFICATION FOR AND MTU 39/A MOUNTING TRAY |
| L-P-410 Revision A:1966 | PLASTIC, POLYAMIDE (NYLON), RIGID: RODS, TUBES, FLATS, MOLDED AND CAST PARTS |
| AA C 30 : D | CABINET, KEY, (BOXES AND RACKS METAL AND IDENTIFICATION SYSTEMS) |
| MIL-A-52679 Revision B:1983 | ANCHOR, SURFACING MEMBRANE: 12 INCH |
| GGG-G-670 Base Document:1956 | GRASS HOOKS, WHIP GRASS CUTTERS, AND WHIP WEED CUTTERS |
| MIL-K-52338 Revision B:1991 | KEEPER ASSEMBLY, CABLEWAY, MEDIUM |
| MIL P 17667 : D | PAPER, WRAPPING, CHEMICALLY NEUTRAL (NON CORROSIVE) |
| MIL-C-82890 Base Document:1993 | CARTRIDGE, FIRE EXTINGUISHER CCU-120/A |
| MIL T 0022238 : J | TANK, LIQUID STORAGE, METAL, FOR PETROLEUM PRODUCTS |
| MIL C 14522 : D | COMPONENTS, PREFABRICATED STRONG ROOM, PORTABLE: FOR SMALL ARMS AND EQUIPMENT |
| MIL-R-38370 Revision B:1972 | RECORDING SET, FLIGHT DATA A/A24U-10 |
| MIL-D-10662 Revision D:1983 | 1,2 DICHLOROETHANE, TECHNICAL |
| MIL-B-12745 Revision A:1973 | BRIDGE ERECTION SET, FIXED BRIDGE, BASIC SET, FOR BRIDGES, STEEL, RAILWAY |
| MIL P 51529 : 0 | PACKAGING OF DECONTAMINATING AGENT |
| MIL A 24779 : 0 | ANODES, SACRIFICIAL ALUMINUM ALLOY |
| MIL-A-52568 Revision C:1982 | AIR CONDITIONER, TRAILER MOUNTED, ELECTRIC-MOTOR DRIVEN, 18,000 BTU/HR |
| PPP-C-795 Revision D:1994 | Cushioning Material, Closed Cell Flexible, Plastic Film |
| MIL-A-53100 Base Document:1990 | ARCTIC FUEL SYSTEM SUPPLY POINT (AFSSP) |
| MIL-D-70327 Base Document:1959 | DRAWINGS, ENGINEERING AND ASSOCIATED LISTS |
| MIL-A-46146 Revision B:1990 | ADHESIVE-SEALANTS, SILICONE, RTV, NONCORROSIVE (FOR USE WITH SENSITIVE METALS AND EQUIPMENT) |
| MIL-B-14154 Revision E:1992 | BORING MACHINE, CAM AND MAIN BEARINGS, PORTABLE |
| MIL-C-87979 Base Document:1987 | CLOCK, AIRCRAFT, ELECTRONIC |
| RR-F-191 Revision K:1990 | FENCING, WIRE AND POST METAL (AND GATES, CHAIN-LINK FENCE FABRIC, AND ACCESSORIES) (GENERAL SPECIFICATION) |
| JJ-N-171 Revision C:1977 | NET, INSECT |
| MIL P 21454 : 0 | POWER SUPPLIES, METALLIC RECTIFIER, CATHODIC PROTECTION, RESERVE FLEET |
| MIL-C-36229 Base Document:1964 | CYLINDER, GRADUATED LABORATORY, POLYPROPYLENE |
| MIL-P-24608 Revision A:1987 | PIPE, FITTINGS, AND ADHESIVE KITS, GLASS-REINFORCED THERMOSETTING EPOXY RESIN FOR SHIPBOARD PIPING SYSTEMS |
| MIL-J-87250 Base Document:1988 | JACKET, MAN'S: LIGHTWEIGHT WITH REMOVABLE LINER |
| GG-G-91 Revision D:1972 | GAGE, TIRE PRESSURE, SELF CONTAINED AND INFLATOR GAGE, PNEUMATIC TIRE |
| MIL-T-12173 Revision D:1992 | TRAVELLER, BICYCLE |
| MIL-S-52300 Revision D:1991 | SHOE ASSEMBLY, TRESTLE |
| L-B-001190 Base Document:1959 | BOTTLE, SCREW CAP (MEDICAMENT CONTAINER/DISPENSER FOR FIELD KIT/ASSEMBLIES) |
| MIL-B-20179 Revision E:1992 | BAG, BAILEY BRIDGE PARTS AND TOOLS: CLOTH, COTTON DUCK |
| MIL-J-26149 Revision E:1988 | Jack, Hydraulic, Aircraft Maintenance, General Specification for |
| MIL-F-81334 Revision B:1977 | FOAM, PLASTIC, FLEXIBLE, OPEN CELL, POLYESTER TYPE POLYURETHANE |
| MIL-C-55158 Revision B:1973 | CHARGER, BATTERY, PP-1659 ( ) /G |
| MIL T 5578 : C | TANK, FUEL, AIRCRAFT, SELF-SEALING |
| MIL-G-52859 Revision A:1975 | GENERATOR SET, DIESEL ENGINE, TRAILER MOUNTED 30 KW, 400 HERTZ, PU-760/M |
| MIL-P-44115 Revision B:1992 | PLATFORM, ASSEMBLY, CARGO, AERIAL DELIVERY, TYPE V |
| MIL-DTL-2845 Revision E:1999 | PROPULSION SYSTEMS, BOAT AND SHIP; MAIN SHAFTING, PROPELLERS, BEARINGS, GAUGES, SPECIAL TOOLS, AND ASSOCIATED REPAIR PARTS; PRESERVATION, PACKAGING, PACKING AND STORAGE OF |
| MIL T 14387 : A | TEST SET, RADAR AN/UPM-60() |
| MIL-A-46106 Revision B:1989 | ADHESIVE-SEALANTS, SILICONE, RTV, ONE-COMPONENT |
| MMM-A-132 Revision B:1994 | ADHESIVES, HEAT RESISTANT, AIRFRAME STRUCTURAL, METAL TO METAL |
| MIL-H-775 Revision E:1987 | HOSE, RUBBER OR FABRIC (INCLUDING TUBING); AND FITTINGS, NOZZLES AND STRAINERS, PACKAGING OF |
| MIL-H-43905 Revision C:1990 | HASP, HIGH SECURITY PADLOCKS |
| MIL R 20092 : L | RUBBER OR PLASTIC SHEETS AND ASSEMBLED AND MOLDED SHAPES, SYNTHETIC, FOAM OR SPONGE, OPEN CELL |
| MMM-A-1617 Revision B:1995 | ADHESIVE RUBBER BASE GENERAL PURPOSE |
| L-P-535 Revision E:1979 | PLASTIC SHEET (SHEETING): PLASTIC STRIP: POLY(VINYL CHLORIDE) AND POLY(VINYL CHLORIDE-VINYL ACETATE), RIGID |
| MIL I 52295 : B | INTERPRETATION KIT, PHOTOGRAPHIC, ARMY TYPE |
| MIL-H-52297 Revision D:1988 | HOLDFAST ASSEMBLY: BAR TYPE |
| MIL-L-11647 Revision E:1991 | LEVER, BALK DEPRESSING, CLAW BAR TYPE |
| MIL-T-13420 Revision A:1959 | TELEPHONE SET TA 264() PT |
| MIL T 14398 : J | TANK, FABRIC, COLLAPSIBLE, WATER, NYLON, RUBBER-COATED |
| MIL-R-10761 Revision A:1962 | ROTARY CONVERTER (MOTOR GENERATOR) PU 134 ()/U, PU 140 ()/U, PU 141()/U & PU 143 ()/U |
| MIL-T-21677 Base Document:1958 | TEST SET MARK 3 MOD 2 |
| MIL-S-55389 Base Document:1973 | SUPPRESSOR, ELECTRICAL TRANSIENT, MX-7778A/GRC |
| MIL-S-55234 Base Document:1963 | STANDING WAVE RATIO-POWER METER, ME-165 ( )/G |
| MIL-O-37997 Base Document:1985 | OXYGEN GAS, USP HIGH PRESSURE, CYLINDER |
| MIL-I-27191 Revision C:1995 | INDICATOR, POSITION, VARIABLE NOZZLE |
| MIL-A-85705 Revision A:1987 | ADHESIVE, AIRCRAFT, FOR STRUCTURAL REPAIR |
| MIL-E-16298 Revision D:1989 | ELECTRIC MACHINES HAVING ROTATING PARTS AND ASSOCIATED REPAIR PARTS, PACKAGING OF |
| MIL-I-81550 Revision C:1983 | INSULATING COMPOUND, ELECTRICAL, EMBEDDING, REVERSION RESISTANT SILICONE |
| MIL-C-13766 Revision C:1983 | CONVERSION KIT, BARGE, DECK ENCLOSURE DESIGN 7006, FOR DESIGNS 213A AND 7005 |
| DOD-B-24559 Base Document:1977 | BATTERY CELLS, MAIN STORAGE, LEAD ACID, DEEP SUBMERGENCE VEHICLES (METRIC) |
| MIL-V-29592 Base Document:1993 | VALVE, AIR VENT, AUTOMATIC, HYDRAULIC, LOW PRESSURE TYPE II SYSTEMS, GENERAL SPECIFICATION FOR |
| MIL-R-22368 Revision D:1980 | REPAIR KIT AND REPAIR KIT COMPONENTS, FOR COLLAPSIBLE FABRIC TANKS AND BOATS |
| MIL F 27272 : B | FITTING, TETRAFLUOROETHYLENE HOSE, HIGH TEMPERATURE, MEDIUM PRESSURE, GENERAL REQUIREMENTS FOR |
| MIL-P-55213 Base Document:1963 | POWER SUPPLY PP-1588 ( ) MPQ-4A |
| MIL-T-21684 Base Document:1958 | TEST SET MARK 96 MOD 1 |
| ASTM F 1245 : 1989 : R1994 : EDT 1 | Standard Specification for Faucets, Single and Double, Compression and Self-Closing Type, Shipboard |
| MIL-B-734 Revision E:1984 | BREAKER, PAVING, GASOLINE POWERED, SELF CONTAINED |
| MIL-L-52056 Revision D:1984 | LIGHT, SIGNAL, SURVEYING: SELF ILLUMINATED WITH CARRYING CAEM FOR USE WITH RANGE POLE |
| MIL V 52837 : A NOTICE 1 | VIEWER, X-RAY FILM INDUSTRIAL, WALL MOUNTED |
| MIL-S-196 Revision D:1988 | SUPPORT ITEMS, ACCESSORIES, AND KITS, MECHANICAL; PACKAGING OF |
| MIL-C-12517 Revision A:1965 | CASE, HYDROGEN GENERATOR SET (CASE CY-219 ()/TMQ-3) |
| MIL-R-46837 Revision B:1990 | RACEWAY, STEEL, RIGID |
| MIL-E-15330 Revision D:1977 | EXPANSION JOINT, PIPE, SYNTHETIC RUBBER, FIRE RETARDANT (NAVY) |
| MIL W 5521 : B | WASHER, AIRCRAFT HYDRAULIC PACKING BACK UP |
| MIL-C-24314 Revision C:1985 | CANISTER, ND-C-2 (FOR ND MARK V PROTECTIVE MASK) |
| MIL H 27893 : E | HARNESS, PARACHUTIST S, INDIVIDUAL EQUIPMENT PACK (H TYPE) |
| AA-B-2825 Base Document:1994 | BED, BUNK, STEEL, SQUARE TUBE, WITH END PANELS SINGLE AND DOUBLE-DECK |
| MIL P 197 : H | PACKAGING OF BEARINGS, ANTIFRICTION, ASSOCIATED PARTS AND SUBASSEMBLIES |
| MIL A 5815 : E | ANTENNA, AIRBORNE, UHF - BAND GENERAL SPECIFICATION FOR |
| SAE AMS R 83485 : 2014 | RUBBER, FLUOROCARBON ELASTOMER, IMPROVED PERFORMANCE AT LOW TEMPERATURES |
| MIL P 85891 : A | PLASTIC MEDIA, FOR REMOVAL OF ORGANIC COATINGS |
| MIL-S-7124 Revision B:1966 | SEALING COMPOUND, POLYSULFIDE, ACCELERATOR REQUIRED FOR AIRCRAFT STRUCTURES |
| MIL-C-51047 Revision B:1987 | COMPOUND, ANTISEEPAGE, FOR COOLING SYSTEM, INTERNAL COMBUSTION ENGINE (METRIC) |
| MIL-S-52836 Revision A:1974 | SUPPLEMENTARY SET, BRIDGE, TROOP SUPPORT, PACKAGING OF |
| MIL-P-49139 Base Document:1978 | POWER SUPPLY PP6L48 ((/U |
| MIL-T-53048 Revision C:1991 | TANK, FABRIC, COLLAPSIBLE; AIR COLUMN SUPPORTED, OPEN TOP, WATER STORAGE 3000 GALLONS |
| MIL D 9129 : D | DISCHARGERS, ELECTROSTATIC - GENERAL SPECIFICATION FOR |
| MIL-P-53124 Base Document:1992 | POWER UNITS/POWER PLANTS, ELECTRIC, DIESEL ENGINE, TRAILER MOUNTED |
| MIL-P-55200 Revision D:1973 | POWER SUPPLY PP-2953 ( ) /U |
| MIL-V-28712 Base Document:1969 | VOLTMETER, MILITARIZED, SOLID STATE, DC DIFFERENTIAL, GENERAL SPECIFICATION FOR |
| PPP-P-001938 Base Document:1976 | PACKAGING AND PACKING OF OFFICE PARTITIONS, PORTABLE, FABRIC COVERED |
| PPP-G-2919 Base Document:1997 | GENERATOR SETS, MOBILE ELECTRIC POWER AND SUPPLEMENTAL EQUIPMENT; PACKAGING OF |
| MIL-G-52557 Revision C:1985 | GENERATOR SET, GASOLINE ENGINE, TRAILER MOUNTED 5 KW 60 HERTZ PU-620M |
| MIL-P-25621 Revision B:1974 | PRESERVATION, PACKAGING AND PACKING OF RUBBER AND NYLON FUEL, OIL AND WATER PLUS ALCOHOL CELLS |
| MIL-D-37219 Base Document:1975 | DISULFIRAM TABLETS NF |
| MIL-B-52472 Revision C:1987 | BAG SAND POLYPROPYLENE |
| MIL H 49078 : 0 | HANDSET H-250( (/U |
| MIL-I-38121 Revision C:1989 | INDICATOR, PRESSURE, EGU-9/A |
| MIL-P-87938 Base Document:1984 | PEROXIDE METHYL ETHYL KETONE, TECHNICAL |
| MIL-C-51211 Revision B:1967 | CALCULATOR, DOWNWIND TOXIC VAPOR HAZARD, POINT SOURCE, ABC-M2 |
| MIL-C-36611 Base Document:1969 | |
| GG-S-636 Revision B:1957 | SPLINT, WIRE, LADDER |
| MIL-T-26561 Revision C:1984 | TESTER, TYPE MA-2 RECEPTION COUPLING BREAK-AWAY FORCE, PORTABLE |
| GGG-B-0060 Revision A Interim Revision:1966 | BAG, TOOL SATCHEL |
| MIL-C-12889 Revision A:1957 | CAPACITORS, BY-PASS, RADIO-INTERFERENCE REDUCTION, PAPER DIELECTRIC, AC AND DC, (HERMETICALLY SEALED IN METALLIC CASES) GENERAL SPECIFICATION FOR |
| MIL-P-79 Revision C:1961 | PLASTIC ROD AND TUBE THERMOSETTING LAMINATED |
| MIL-R-8236 Revision F:1995 | REEL, SHOULDER HARNESS, INERTIA LOCK |
| MIL M 28837 : 0 | MIXER STAGES, RADIO FREQUENCY GENERAL SPECIFICATION FOR |
| MIL-P-15047 Revision C:1971 | PLASTIC MATERIAL, LAMINATED THERMOSETTING SHEETS, NYLON FABRIC BASE, PHENOLIC RESIN |
| MIL-B-36558 Revision B:1992 | BEDS, ADJUSTABLE |
| MIL-P-52854 Revision A:1979 | POWER PLANT, ELECTRIC, TRAILER MOUNTED, DIESEL ENGINE, 30 KW, 50/60 HERTZ, AN/MJQ-10A |
| MIL-O-23678 Revision B:1982 | Oxygen Systems, Portable, High Pressure, Aircraft |
| GGG-J-1564 Revision C:1992 | JACKS, DOLLY TYPE, HYDRAULIC, AUTOMOTIVE |
| DDD-C-001023 Base Document:1966 | CUSHION, CARPET AND RUG (HAIR FELT AND RUBBER COATED JUTE AND ANIMAL HAIR OR FIBER) |
| QQ-S-781 Revision H:1974 | STRAPPING, STEEL, AND SEALS |
| MIL-A-28716 Base Document:1969 | AMPLIFIER, AUDIO FREQUENCY, AM-3729()/SR |
| MIL-P-13607 Revision B:1975 | PADDING MATERIAL, RESILIENT (FOR PACKAGING OF AMMUNITION) |
| MIL-S-51296 Base Document:1967 | SURVIVAL KIT, AIRMAN S, SEEK-1 |
| MIL-I-27677 Revision E:1990 | INDICATOR, LIQUID OXYGEN QUANTITY |
| MIL-R-10985 Revision A:1956 | REEL, AUTOMATIC TAKE-UP, EXTENSION CABLE, 24-VOLT, D.C |
| MIL D 83320 : 0 | DETECTOR, MAGNETIC AZIMUTH DSU-14/A |
| MIL-M-49199 Revision A:1985 | MICROPHONE, LINEAR M-162/AIC GENERAL SPECIFICATIONS FOR |
| K-P-146 Revision E:1979 | TARPAULINS, COTTON DUCK, FWWMR |
| MIL-T-10163 Revision E:1992 | TERRAIN MODELING KIT, TRAINING AID |
| MIL-P-9388 Revision B:1986 | PUMP, PRESSURE, OIL FREE AIR TYPE MA-2 |
| MIL-T-45309 Revision E:1983 | TANK, COMBAT, FULL TRACKED, 105 MM GUN, M60, M60A1, M601A (RISE) & M60A3 PROCESSING FOR SHIPMENT & STORAGE OF |
| MIL-F-36271 Base Document:1964 | FOOTPRINTER, INFANT IDENTIFICATION, DISPOSABLE, 50S |
| MIL-H-36376 Revision B:1971 | HOLDER, MICROPOROUS BACTERIAL FILTERING DISK |
| MIL-T-21669 Base Document:1958 | TEST SET, MARK 25 MOD 1 |
| MIL-C-46168 Revision D:1987 | COATING, ALIPHATIC POLYURETHANE, CHEMICAL AGENT RESISTANT |
| MIL P 26514 : F | POLYURETHANE FOAM, RIGID OR FLEXIBLE, FOR PACKAGING |
| MIL C 14055 : E | CUP, HYDRAULIC BRAKE ACTUATING CYLINDER: SYNTHETIC RUBBER |
| MIL A 52512 : A NOTICE 1 | AIR CONDITIONERS: VERTICAL, COMPACT 6,000 BTU/HR |
| GG-C-131 Revision C:1977 | CASSETTES, RADIOGRAPHIC FILM (MEDICAL) |
| MIL DTL 46746 : E | CARRIERS, COMMAND POST, LIGHT TRACKED: M577,M577A1,M577A2 AND M577A3: AND CARRIERS, COMMAND POST SYSTEM, STANDARDIZED INTEGRATED: M1068 AND M1068A;PROCESSING FOR STORAGE AND SHIPMENT OF |
| MIL-F-85421 Revision B:1986 | FITTINGS, TUBE, FLUID SYSTEMS, SEPARABLE, BEAM SEAM, 3000/4000 PSI - GENERAL SPECIFICATION FOR |
| MIL H 11996 : B | HANDSET H-60/PT, HANDSET H-156/U, AND HANDSET H-165/U |
| MIL-T-22047 Base Document:1959 | TEST SET MARK 27 MOD 1 |
| MIL-N-37996 Base Document:1985 | NITROUS OXIDE GAS USP HIGH PRESSURE, CYLINDER |
| MIL-T-52956 Revision A:1984 | TEST SET, POSITION & AZIMUTH DETERMINING SYSTEM, AN/USM-427 |
| MIL-T-52369 Revision B:1991 | TOWER ASSEMBLY, CABLEWAY, MEDIUM |
| MIL-B-52467 Revision C:1981 | BAR, CARRYING LIGHT TACTICAL BRIDGE |
| MIL-P-18324 Revision D:1964 | PLASTIC MATERIAL, LAMINATED PHENOLIC, FOR BEARINGS (WATER OR GREASE LUBRICATION) |
| MIL C 44404 : 0 | COMMAND POST, TENT, STANDARDIZED INTEGRATED COMMAND POST SYSTEM |
| MIL-B-14075 Revision B:1975 | BAG, COOPER'S TOOLS |
| MIL-C-0010244 Revision H:1978 | CRYPTOGRAPHIC EQUIPMENT DESTROYER INCENDIARY, TH4, M2A1 |
| MIL-R-52255 Revision D:1988 | REPAIR KIT AND REPAIR KIT COMPONENTS, FOR COLLAPSIBLE FABRIC TANKS, DRUMS, AND BOATS |
| GG-C-2736 Revision A:1987 | CATHETER, CARDIOVASCULAR (FLOW DIRECTED, THERMODILUTION) |
| MIL-P-44305 Base Document:1988 | PLASTIC FILM, FLEXIBLE, POLYAMIDE AND POLYETHYLENE |
| PPP-P-1132 Revision C:1983 | PACKAGING OF WOOLLEN, WORSTED AND WOOL BLEND (SYNTHETIC FIBER; COTTON) FABRICS |
| AA-W-001950 Base Document:1975 | WARDROBE WITH ACCESSORY PIECES, WOOD, STEEL FRAME |
| MIL-B-28873 Base Document:1983 | BLOWERS, ELECTRONICALLY COMMUTATED BRUSHLESS, DIRECT CURRENT, (ECDC) MOTOR DRIVEN, FOR COOLING ELECTRONIC EQUIPMENT, GENERAL SPECIFICATION FOR |
| MIL A 24641 : A | ACID, HYDROFLUORIC; TECHNICAL |
| MIL C 3607 : A | CONNECTOR, COAXIAL, RADIO FREQUENCY, SERIES PULSE GENERAL SPECIFICATION FOR |
| MIL-V-82466 Base Document:1967 | VACUUM-AIR-NITROGEN DISTRIBUTION SYSTEM |
| MIL-B-28617 Revision C:1977 | BOOMS, FLOATING BARRIER, OIL (FOR HARBOR USE) |
| SS-S-200 Revision E:1984 | SEALANT, JOINT, TWO COMPONENTS, JET BLAST RESISTANT, COLD APPLIED, FOR PORTLAND CEMENT CONCRETE PAVEMENT |
| MIL-B-53102 Base Document:1990 | BERM LINER ASSEMBLIES, ARCTIC SERVICE |
| MIL-T-12442 Revision D:1992 | TOWER, CABLE ANCHOR |
| MIL-C-0016809 Revision C:1969 | CASE, MEDICAL INSTRUMENT AND SUPPLY SET, NONRIGID, NO. 4 |
| GGG-C-291 Revision A:1963 | CHALK LINE AND REEL (SELF-CHALKING) |
| MIL-H-12240 Revision A:1958 | HYDROMETER, SYRINGE, BATTERY TS-765()/U |
| MIL-B-8568 Revision B:1967 | BINOCULAR, PRISMATIC, HAND-HELD [FOR AERONAUTICAL USE] 7 X 50 AND 6 X 42 WIDE FIELD [ASG] |
| MIL S 25879 : C | SWITCH, RADIO FREQUENCY TRANSMISSION LINE SA-521A/A |
| MIL-B-13872 Revision C:1975 | BOX, CONTAINERS, FOR NON-ELECTRIC BLASTING CAPS |
| MIL-S-20552 Revision B:1983 | SODIUM AZIDE, TECHNICAL (METRIC) |
| ZZ-R-765 Revision E:1991 | RUBBER, SILICONE; RUBBER SHEET SOLID |
| MIL C 12000 : H | CABLE, CORD, AND WIRE, ELECTRIC; PACKAGING OF |
| MIL-C-10320 Revision E:1982 | COVER, LEVEL ROD, PHILADELPHIA: CANVAS |
| A-B-2787 Base Document:1992 | BOOMS: FLOATING OIL AND DEBRIS CONTAMINANT, DEPLOYABLE (FOR HARBOR USE) |
| O-S-642 Revision G:1993 | SODIUM PHOSPHATE, TRIBASIC, ANHYDROUS, DODECAHYDRATE, & MONOHYDRATE, TECHNICAL |
| MIL-A-53009 Revision A:1991 | ADDITIVE, ANTIFREEZE EXTENDER, LIQUID COOLING SYSTEM |
| ASTM F 1348/F1348M : 1991 : R2007 | Standard Specification for Pneumatic Rotary Descaling Machines |
| MIL-T-27305 Revision C:1987 | TRANSFORMER AND INDUCTORS [AUDIO, POWER AND HIGH POWER PULSE] INDUCTOR, POWER TF5S04ZZ |
| MIL-B-52118 Revision E:1991 | BALK DECK |
| MIL-C-87972 Revision A:1987 | CASTERS, RIGID AND SWIVEL, GENERAL SPECIFICATION FOR |
| MIL-B-43909 Base Document:1974 | BELLOWS, EXPANDABLE SHELTER (MUST) |
| MIL-C-10922 Revision G:1985 | CASE, PARACHUTIST'S, INDIVIDUAL WEAPONS, M-1950, ADJUSTABLE |
| MIL P 28809 : A | PRINTED WIRING ASSEMBLIES |
| MIL-B-51333 Base Document:1952 | BARIUM PERCHLORATE, ANHYDROUS, ANALYZED REAGENT |
| MIL-B-55298 Base Document:1965 | BAROGRAPH ML-563 /UM |
| MIL R 1229 : C | RUBBER SHEET PACKING, SOLID, WIRE CLOTH INSERTED, SYMBOL, 2354 |
| MIL-S-18538 Base Document:1955 | SIGNAL MINIATURE PRACTICE BOMB, MK 4 MOD 3 AND MOD 4 |
| MIL E 75 : H | ELECTRON TUBES PACKING OF |
| MIL-R-22628 Base Document:1964 | RESIN, CASTING, EPOXY, ALUMINUM FILLED |
| MIL-A-37049 Base Document:1974 | APRON, DENTAL, PLASTIC, DISPOSABLE |
| MIL-B-55521 Revision C:1983 | BATTERIES, NONRECHARGEABLE, PACKING OF |
| MIL C 62015 : F NOTICE 1 | CARRIER, CARGO, FULL-TRACKED, M548 AND N548A1; AND CARRIER, ELECTRONIC WARFARE SYSTEMS, FULL-TRACKED SHIPMENT OF |
| MIL-H-36343 Revision B:1966 | HYDROMETERS, GRADUATED SCALE WITH THERMOMETER, API GRAVITY |
| MIL C 39028 : C | CAPACITORS, PACKAGING OF |
| MIL-C-3635 Revision C:1978 | COMPASS, DRAFTING, BEAM |
| MIL-D-52975 Base Document:1980 | DRAWING BOARD, ILLUMINATED, PORTABLE |
| MIL-T-55402 Base Document:1974 | TRANSMITTER GROUP, SIMULATED RADIAC, HOT SPOT OT-52( )/T |
| MIL-R-52807 Revision B:1991 | ROLLER, TRANSOM, BAILEY BRIDGE |
| MIL-R-24159 Revision A:1983 | RECEPTACLE, CANISTER, CO 2 ABSORBENT |
| MIL-P-22296 Revision B:1973 | PLASTIC TUBES AND TUBING, POLYTETRAFLUOROETHYLENE, (TFE-FLUOROCARBON RESIN) HEAVY WALLED |
| MIL-B-117G:1993 | BAG, SLEEVE AND TUBING |
| MIL-C-13125 Revision C:1983 | COMPOUND: MOUNTING FOR OPTICAL LENS BLANKS |
| MIL-B-40028 Revision B:1976 | BAG, BARRIER WITH VOLATILE CORROSION INHIBITOR TREATED LINERS |
| MIL-P-12420 Revision D:1991 | PLASTIC MATERIAL, CELLULAR, ELASTOMERIC |
| HH-G-101 Revision E:1990 | GASKET, METALLIC-ENCASED |
| DDD R 306 : B | RIBBONS, TELETYPEWRITER, RECORD |
| MIL P 53030 : A | PRIMER COATING, EPOXY, WATER REDUCIBLE, LEAD & CHROMATE FREE |
| MIL-S-38160 Revision B:1968 | Selector, Antenna C-4808/ARC |
| GGG-P-463 Revision C:1973 | PLATE, SURFACE, (GRANITE) |
| MIL-B-37163 Base Document:1975 | BANDAGE, COTTON, ELASTIC |
| MIL-A-83162 Revision A:1989 | AMPLIFIER, SYNCHRO, SIGNAL AM-6015/A |
| MIL I 15379 : B NOTICE 1 | MILITARY SPECIFICATION - INHALATOR, DIVERS, FOR ADMINISTERING HELIUM OXYGEN DURING DECOMPRESSION |
| MIL-H-3280 Revision E:1990 | HOIST, CHAIN, MANUALLY OPERATED, PACKAGING OF |
| GG-T-380 Base Document:1958 | |
| MIL-I-3505 Revision C:1960 | INSULATION SHEET AND TAPE, ELECTRICAL, COIL AND SLOT, HIGH TEMPERATURE |
| TT-I-547 Revision A:1956 | INK, NUMBERING MACHINE, FOR PHOTOGRAPHIC NEGATIVES |
| GGG-P-446 Revision A:1964 | PLATE, LAPPING |
| MIL-M-7255 Revision B:1969 | MANOMETER, PRESSURE, DIFFERENTIAL AND ABSOLUTE TYPE E 1 |
| MIL-R-19558 Revision A:1960 | REGULATOR, AIR, DEMAND, DIVER'S |
| MIL-B-16008 Revision C:1965 | BRICK, INSULATION, HIGH TEMPERATURE, FIRE CLAY |
| SS-C-466 Revision E:1964 | CLOTH, THREAD, AND TAPE-ASBESTOS |
| GG M 181 : D | MEASURER, MAP |
| MIL-M-6867 Revision C:1969 | MAGNETIC INSPECTION UNITS |
| MIL-P-83310 Base Document:1971 | PLASTIC SHEET, POLYCARBONATE, TRANSPARENT |
| MIL L 44076 : A | LOWERING LINE ASSEMBLY |
| NNN-C-688 Base Document:1962 | CRUCIBLE, IGNITION LABORATORY METAL |
| MIL-S-12991 Revision B:1971 | SURVEYING SET, TOPOGRAPHIC COMPANY, PACKAGING OF |
| MIL-S-52548 Revision A:1975 | SURVEYING SET, TRIANGULATION, PRINCIPAL OBSERVER AND SIGNAL TENDER PACKAGING OF |
| MIL G 52886 : A | GENERATOR SET, DIESEL ENGINE, TRAILER MOUNTED 60 KW, 400 HERTZ, PU-707 A/M |
| CCC-S-00320 Base Document:1963 | SHEETING AND TAPE, REFLECTIVE; ADHESIVE BACKING |
| MIL-B-13164 Revision A:1973 | BRIDGE, FIXED, STEEL, HIGHWAY, SEMIPERMANENT, 90-FOOT TRUSS SPAN |
| MIL-S-13224 Revision A:1959 | SURVEYING SET, SUPPLEMENTARY EQUIPMENT TOPOGRAPHIC BATTALION: SET NO. 15 PACKAGING OF |
| MIL S 81733 : C | SEALING AND COATING COMPOUND CORROSION INHIBITIVE |
| MIL-P-63381 Base Document:1980 | PAPER, SHOT SHELL (FOR USE IN AMMUNITION) |
| MIL T 5780 : D NOTICE 1 | TRANSMITTER, PRESSURE, MANIFOLD 10-75 INCH MERCURY |
| MIL-A-47089 Base Document:1974 | ADHESIVE, METAL FILLED, CONDUCTIVE, ELECTRICAL AND THERMAL |
| GG D 00458 : C | DISPENSER, PRESSURE-SENSITIVE ADHESIVE TAPE |
| NNN-D-345 Revision A:1963 | DISH EVAPORATING PLATINUM |
| MIL W 87893 : A | WORKSTATION, ELECTROSTATIC DISCHARGE (ESD) CONTROL |
| MIL M 9950 : A NOTICE 1 | MISSILE COMPONENTS, LIQUID OXYGEN, LIQUID NITROGEN, GASEOUS OXYGEN, GASEOUS NITROGEN, INSTRUMENT AIR, HELIUM AND FUEL HANDLING SYSTEMS, CLEANING AND PACKAGING FOR DELIVERY |
| MIL P 8184 : E | PLASTIC SHEET, ACRYLIC, MODIFIED |
| MIL-G-3048 Revision B:1955 | GENERATOR SET, DIESEL ENGINE, DIRECT AND ALTERNATING CURRENT [NAVAL SHIP BOARD USE] |
| MIL-P-45051 Revision D:1985 | PRESS, CONNECTING ROD STRAIGHTENING, HYDRAULIC |
| MIL-B-43550 Revision A:1979 | BAG, WATER REPELLENT, SIGNAL EQUIPMENT, BG 102 VALIDATED JUN 1972 |
| GG S 776 : C | STRAIGHTEDGE, STEEL, DRAFTSMEN |
| MIL-S-64052 Base Document:1988 | SPRAY GUN, PAINT, HEAVY DUTY, PRESSURE FEED |
| MIL-I-38338 Revision D:1991 | INDICATOR, OIL QUANTITY, CONTINUOUS TRANSMISSION, NUCLEONIC |
| WW-H-001220 Base Document:1966 | HEAD SPRINKLER, (UNDERGROUND CONNECTED) |
| MIL T 781 : D | TERMINAL, WIRE ROPE, SWAGING |
| MIL-A-82950 Base Document:1995 | ACTUATOR, BELLOWS ATU-117/P |
| MIL-G-37097 Base Document:1975 | GENTIAN VIOLET TABLETS |
| MIL-STD-1428 Base Document:1981 | CLEANING COMPOUNDS |
| MIL-B-37201 Base Document:1975 | BISACODYL SUPPOSITORIES, NF |
| MIL R 3593 : D | REFRIGERATION AND COOLING EQUIPMENT [EXCLUDING HOUSEHOLD REFRIGERATORS] PACKAGING OF |
| MIL-T-7305 Revision C:1987 | TRANSMITTER, PRESSURE TORQUE TYPE D 5 |
| MIL E 6060 : D | ENVELOPE, PACKAGING WATER VAPOR PROOF, FLEXIBLE |
| MIL E 37226 : 0 | OESTROGENS CONJUGATED, CREAMS |
| MIL-A-29247 Base Document:1986 | AUGER, EARTH, TRUCK-MOUNTED, 4 BY 4, DIESEL ENGINE DRIVEN, 28,000 LB MINIMUM GVW, WITH POLE SETTER AND WIRE REEL |
| MIL-STD-1816 Base Document:1992 | PRESERVATION, PACKAGING & PACKING OF RUBBER & NYLON FUEL, OIL & WATER-ALCOHOL CELLS |
| MIL P 81997 : B | POUCHES, CUSHIONED, FLEXIBLE, ELECTROSTATIC FREE, RECLOSABLE, TRANSPARENT |
| MIL-S-36594 Base Document:1969 | SODIUM CHLORIDE SODIUM BICARBONATE MIXTURE 4.5 GM 2S |
| RR-C-550 Revision D:1991 | CONTAINER, FLUID, FOR PAINT SPRAY EQUIPMENT |
| MIL-S-52362 Revision D:1977 | SURVEYING SET GENERAL PURPOSE FOR PLAINMETRIC CONSTRUCTION & TOPOGRAPHIC SURVEYS, PACKAGING OF |
| MIL-B-16907 Revision G:1988 | BOILER, STEAM, HIGH PRESSURE, AUXILIARY FIRE TUBE TYPE, NAVAL SHIPBOARD |
| QQ-W-345 Revision B:1965 | WIRE, ELECTRICAL, STEEL, COPPER COVERED |
| GG-B-636 Revision B:1960 | BRACKET, X-RAY FILM HANGER, RADIOGRAPHIC, STORAGE |
| MIL-G-29170 Revision B:1988 | GASKET, SYNTHETIC RUBBER, REINFORCED [FOR DRYDOCK CAISSONS] |
| MIL-V-21701 Revision B:1969 | VALVE, CHECK, OXYGEN MASK, INLET |
| GG D 475 : A | DIVIDER, SPACING, EQUAL |
| MIL-I-27196 Revision C:1988 | INDICATOR, VERTICAL VELOCITY AAU-9/A, INTEGRALLY LIGHTED |
| MIL-B-3694 Revision C:1975 | BRIDGE CAPACITANCE INDUCTANCE RESISTANCE AN/URM-90 |
| MIL-T-82270 Revision B:1975 | TROUSERS, WET SUIT (CHLOROPRENE FOAM) |
| MIL V 27166 : D | VALVE, PRESSURE EQUALIZING, GASEOUS PRODUCTS |
| MIL N 27444 : D | NET, CARGO TIEDOWN, PALLETS, HCU-7/E, HCU-15/C, HCU-11/C, AND HCU-16/C |
| AA-T-636 Revision A:1957 | TRAY, DESK; AND SUPPORT SET, STACKING, DESK TRAY |
| L-P-516 Revision A:1967 | PLASTIC SHEET AND PLASTIC ROD, THERMOSETTING, CAST |
| MIL T 25620 : C | TESTER, OXYGEN MASK, HEADSET AND MICROPHONE, TYPE MQ-1A |
| GG-H-00582 Revision A:1967 | HOLDER, PATIENT'S BED TRAY CARD |
| MIL-R-46082 Revision B:1983 | RETAINING COMPOUNDS, SINGLE COMPONENT, ANAEROBIC |
| MIL-C-55639 Revision A:1973 | CHARGER, BATTERY PP-4127 ( )/U |
| MIL S 3470 : D | SPLINE AND WEIGHTS SET |
| GGG-C-415 Revision A:1965 | CLAW, TACK |
| MIL I 27279 : B | INDICATOR, MACH NUMBER AVU-11/A, INTEGRAL LIGHTING |
| MIL C 21617 : 0 | CONNECTOR, PLUG AND RECEPTACLE ELECTRICAL RECTANGULAR, POLARIZED SHELL, MINIATURE TYPE |
| MIL-C-11347 Revision E:1977 | CASES, BATTERY AND LIGHTING ACCESSORY, FOR SURVEYING EQUIPMENT |
| MIL A 27434 : A | ADAPTER, CONNECTOR, COAXIAL, RADIO FREQUENCY, BETWEEN SERIES, GENERAL SPECIFICATION FOR |
| MIL-C-5040 Revision H:1994 | Cord, Fibrous, Nylon |
| MIL-C-3955 Revision C:1975 | CANS, COMPOSITE, SPIRALLY WOUND |
| MIL-C-11260 Revision D:1980 | CLAMP, HANDLE, STEEL TAPE |
| KK-B-151 Revision H:1977 | BELT, LINEMAN'S; AND STRAP, POLE LINEMAN'S TYPE |
| MIL R 16847 : E | RING BUOY, LIFESAVING, UNICELLULAR PLASTIC |
| MIL C 55235 : 0 | CONNECTOR, COAXIAL, RADIO FREQUENCY, SERIES TPS |
| MIL-B-53067 Base Document:1987 | BOAT, RECONNAISSANCE/LANDING ASSAULT, INFLATABLE: 3-, 7-, 15-PERSON |
| MIL-P-43951 Revision A:1989 | PADLOCK AND PADLOCK SETS, KEY OPERATED, MEDIUM SECURITY, REGULAR SHACKLE |
| GG-M-001371 Base Document:1978 | MALLET, PLUGGING, DENTAL |
| MIL-C-3133 Revision C:1976 | CELLULAR ELASTOMERIC MATERIALS, MOLDED OR FABRICATED |
| MIL P 0036599 : 0 | PIPET, PLASTIC, DISPOSABLE, STERILE |
| MIL-T-21369 Revision C:1990 | TEST SET MARK 127 MOD 4 |
| MIL-P-52674 Base Document:1969 | PHOTOMAPPING SECTION, TOPOGRAPHIC MAPPING SET, TRUCK MOUNTED, PACKAGING OF |
| MIL A 25457 : B NOTICE 1 | ADHESIVE, AIR DRYING, SILICONE RUBBER |
| MIL-B-36419 Base Document:1965 | BAG, URINE COLLECTION, PLASTIC, DISPOSABLE, 50'S |
| MIL C 83729 : A | CHOPPER, ELECTROMECHANICAL GENERAL SPECIFICATION FOR |
| MIL-B-36882 Base Document:1972 | BAG, FOOD SAMPLE, POLYETHYLENE, DISPOSABLE |
| MIL-B-45989 Revision C:1985 | BALANCER, VEHICLE WHEEL, BUBBLE-TYPE, PORTABLE |
| MIL-C-12512 Revision A:1960 | COILS, TELEPHONE REPEATING (COILS C-161() AND C-288()) |
| MIL-A-37108 Base Document:1974 | ANESTHESIA SET, EPIDURAL, DISPOSABLE |
| MIL-D-24542 Revision B:1988 | DIVING OUTFIT, LIGHTWEIGHT |
| MIL-P-997 Revision D:1966 | PLASTIC MATERIAL, LAMINATED, THERMOSETTING, ELECTRIC INSULATION, SHEETS, GLASS CLOTH, SILICONE RESIN |
| MIL-S-12645 Revision C:1984 | SLINGS, ENDLESS, FIBER ROPE AND NYLON WEBBING |
| JJ-B-191 Revision A:1967 | BELTING, FLAT, CONVEYOR OR POWER TRANSMISSION, COTTON (SOLID WOVEN) |
| GGG-G-15 Revision C:1975 | GAGE BLOCKS AND ACCESSORIES (INCH AND METRIC) |
| MIL-P-5431 Revision A:1967 | Plastic, Phenolic, Graphited Sheets, Rods, Tubes and Shapes |
| MIL-R-81574 Base Document:1968 | RESCUE HAND TOOL, PNEUMATIC |
| FF F 111 : E | FASTENERS, PAPER, METALLIC, COMPRESSOR TYPE |
| NNN-T-785 Revision B:1969 | TUBE CENTRIFUGE PLASTIC |
| MIL M 62338 : A | MULTIPLE LAUNCH ROCKET SYSTEM (MLRS) XM993, PROCESSING FOR STORAGE AND SHIPMENT OF |
| GG-B-89 Revision B:1958 | BAND, ABRASIVE (SILICON-CARBIDE), FOR DENTAL LATHES |
| MIL-P-24691 Base Document:1987 | PIPE AND TUBE, CARBON, ALLOY AND STAINLESS STEEL, SEAMLESS AND WELDED, GENERAL SPECIFICATION FOR |
| MIL-D-82490 Base Document:1967 | DRIVER, GAS OPERATED MARK 8 MOD 0 |
| HH-P-00106 Revision D:1956 | PACKING MATERIAL, FLAX OR HEMP |
| MIL-S-416 Revision D:1979 | STRAINER, WELL, WATER, WIRE WOUND |
| MIL-T-16286 Revision E:1977 | TUBE, STEEL, SEAMLESS, MARINE BOILER APPLICATION |
| TT-P-641 Revision G:1976 | PRIMER, PAINT, ZINC DUST-ZINC OXIDE (FOR GALVANIZED SURFACES) |
| MIL-R-55223 Revision B:1970 | REGULATOR, VOLTAGE CN-514 ( ) /GRC |
| L-C-001369 Base Document:1969 | CUSHION, CARPET AND RUG, BONDED URETHANE |
| SAE AMS P 83310 : 2016 | PLASTIC SHEET, POLYCARBONATE, TRANSPARENT |
| ASTM D 6576 : 2013 : REDLINE | Standard Specification for Flexible Cellular Rubber Chemically Blown |
| ASTM E 784 : 1989 : R1996 | Standard Specification for Clamps, Utility, Laboratory, and Holders, Buret and Clamp |
| SAE AS 39631 : 1999 | UNIVERSAL JOINT, ANTIFRICTION BEARINGS |
| SAE MA 2250 : 2015 | COUPLING FUEL, FLEXIBLE VARIABLE CAVITY, THREADED TYPE WITH FERRULES, METRIC |
| SAE AMS T 6841 : 2016 | TAPE AND SHEET, ADHESIVE, RUBBER AND CORK COMPOSITION |
| ASTM F 1182 : 2007 | Standard Specification for Anodes, Sacrificial Zinc Alloy |
| ASTM F 1312 : 1990 : R2002 | Standard Specification for Brick, Insulating, High Temperature, Fire Clay |
| ASTM F 957 : 1991 : R2006 | Standard Specification for Gong, Sound Signaling |
| MIL-A-52963 Revision B:1986 | AIR CONDITIONER: SPLIT-PACKAGE, 208-VOLT, 3-PHASE, 400-HERTZ, AC, 18,000 BTU/HR COOLING, 30,000 BTU/HR HEATING |
| MIL-L-15596 Revision G:1988 | LOCK, COMBINATION (SAFE AND SAFE LOCKER) |
| MIL-I-37078 Base Document:1974 | INCUBATOR, BACTERIOLOGICAL, Small, 115 volt, 50/60 Hz, AC |
| MIL-B-8907 Revision A:1983 | BOLT, ALLOY STEEL, SHEAR AND TENSILE (156 KSI FSU AND 260 KSI FTU, 450 DEGREE F) EXTERNAL WRENCHING, FLANGED HEAD |
| MIL-S-36971 Revision A:1976 | SHAKING MACHINE, LABORATORY, 115 VOLT, 60 HZ, AC |
| MIL-U-3963 Revision A:1958 | UNIVERSAL JOINT, ANTIFRICTION BEARINGS |
| MIL-C-28809 Revision B:1988 | CIRCUIT CARD ASSEMBLIES, RIGID, FLEXIBLE & RIGID FLEX |
| J-C-580 Revision B:1974 | CORD, ELECTRICAL AND WIRE, ELECTRICAL (0- TO 600- VOLT SERVICE) |
| MIL C 55629 : B | CIRCUIT BREAKERS, MAGNETIC, UNSEALED, TRIP-FREE, SINGLE POLE, FRONT MOUNTED, AUXILIARY CONTACTS (1 TO 100 AMPERES) |
| MIL-T-37213 Revision A:1976 | TIMER, INTERVAL 115 VOLT 60 HZ AC |
| GG-I-488-1 Base Document:1976 | INCUBATOR, BACTERIOLOGICAL, SMALL |
| AA-C-2859 Base Document:1994 | CABINET, SECURITY, WEAPONS STORAGE |
| GG-I-488 Revision C:1957 | INCUBATOR, BACTERIOLOGICAL |
| MIL T 82073 : D NOTICE 1 | TRUCK, LUBRICATING AND FUEL SERVICING, 4 BY 2 AND 4 BY 4 |
| MIL-A-36495 Revision A:1975 | AUDIOMETER, GENERAL DIAGNOSTIC |
| MIL-A-52767 Revision D:1989 | AIR CONDITIONER: VERTICAL AND HORIZONTAL, COMPACT |
| MIL-C-4751 Revision D:1983 | CASTERS, RIGID AND SWIVEL, PRECISION HEAVY DUTY, AND SHOCK ABSORBING |
| MIL-P-52327 Revision C:1990 | PUMPS, CENTRIFUGAL, ELECTRIC-MOTOR-DRIVEN, POSITIVE PRIME, PETROLEUM PRODUCTS, AIRFIELD DEFUELLING AND RECEIVING |
| MIL-A-52424 Revision B:1984 | AIR CONDITIONERS: WALL- OR BASE-MOUNTED, SELF-CONTAINED, MULTIPACKAGE, STANDARD WEIGHT, AIR-COOLED, 6,000-BTU/HR |
| J-L-2744 Base Document:1990 | LEADS, ELECTRICAL, ARC-WELDING |
| J-C-1270 Revision B:1973 | CABLE ASSEMBLY, POWER, ELECTRICAL |
| MIL-S-36963 Revision A:1976 | STIRRER-HOT PLACE, MAGNETIC, LABORATORY |
| GG-I-446 Revision E:1978 | ILLUMINATOR, X-RAY FILM |
| QQ-S-571 Revision F:1994 | SOLDER, ELECTRONIC (96 TO 485 DEGREES C) |
| GG-B-00146 Revision B:1965 | BATH, WHIRLPOOL, CORROSION-RESISTING STEEL |
| MIL E 52031 : D | EXTINGUISHER, FIRE, VAPORIZING LIQUID CF3BR, 2-3/4 POUND, WITH BRACKET |
| MIL-A-37192 Base Document:1975 | AUDIOMETER. AUTOMATIC |
| GG-I-488-2 Base Document:1976 | INCUBATOR, BACTERIOLOGICAL, MEDIUM |
| MIL-B-83050 Revision D:1985 | BOLT, SELF RETAINING, IMPEDANCE TYPE |
| GG-I-488-3 Base Document:1976 | INCUBATOR BACTERIOLOGICAL, LARGE |
| MIL BULL 343 : A | DOCUMENTS APPLICABLE TO AIRCRAFT ENGINES AND PROPELLERS, USE OF |
| MIL-W-37045 Base Document:1974 | WATER BATH, ELECTRIC, SEROLOGICAL, 6 RACK, 115 VOLT, 50-60 HZ, AC |
| W-J-800 Revision F:1992 | JUNCTION BOX, EXTENSION, JUNCTION BOX, COVER, JUNCTION BOX, (STEEL, CADMIUM OR ZINC COATED) |
| MIL F 83798 : B | FITTING, RUBBER HOSE, LIGHTWEIGHT MEDIUM PRESSURE, GENERAL SPECIFICATION FOR |
| AA-F-363 Revision C:1990 | FILING CABINET, SECURITY, MAPS AND PLANS, GENERAL FILING AND STORAGE |
| MIL-C-14370 Revision D:1977 | COMPRESSOR, RECIPROCATING, POWER-DRIVEN, OPEN-TYPE, FOR USE WITH REFRIGERANT-12 |
| MIL-R-13877 Revision D:1987 | REGULATOR, OXYGEN, ACETYLENE, WELDING APPLICATION |
| MIL-C-37022 Revision A:1973 | CENTRIFUGES, LABORATORY, FLOOR MODEL |
| AA-R-200 Revision F:1987 | REFRIGERATOR, MECHANICAL, COMMERCIAL, SELF-CONTAINED, REACH-IN AND PASS-THROUGH |
| MIL-T-53101 Base Document:1990 | TANKS, FABRIC, COLLAPSIBLE, 3000, 10,000 & 20,000 GALLON, PETROLEUM, LOW TEMPERATURE |
| AA-F-357 Revision F:1970 | FILING CABINET, STEEL, LEGAL AND LETTER SIZE, INSULATED, SECURITY |
| MIL-A-0052767 Revision E:1994 | AIR CONDITIONERS: VERTICAL AND HORIZONTAL, COMPACT |
| MIL-B-29172 Revision B:1991 | BUILDING, PORTABLE, SKID MOUNTED, KNOCKDOWN |
| MIL-W-37090 Base Document:1974 | WATER BATH, ELECTRIC, Precision, 6 Rack, 115 Volt, 50-60 Hz, AC |
| MIL-C-5501 Revision G:1989 | CAP AND PLUG, PROTECTIVE, DUST AND MOISTURE SEAL |
| MIL-A-82175 Base Document:1968 | ARMOR, BODY, FRAGMENTATION, PROTECTIVE: FOOTWEAR |
| NNN-O-001191 Base Document:1966 | OVEN LABORATORY |
| MIL-P-46144 Revision C:1986 | PLASTIC SHEET, POLYCARBONATE |
| MIL-C-52788 Revision B:1992 | CONTAINER, REFRIGERATED: 8 FEET X 8 FEET X 20 FEET, INSULATED |
| MIL-C-37040 Revision A:1978 | CENTRIFUGE, LABORATORY, SMALL, 115 VOLT, 600 HZ, AC |
| MIL-B-8831 Revision B:1982 | BOLT, 180 KSI FTU AND 180 KSI FSU 450 DEG F PROTRUDING AND FLUSH HEAD, GENERAL SPECIFICATION FOR |
| MIL W 37060 : A NOTICE 1 | WATER BATH, ELECTRIC, SEROLOGICAL, 115 VOLT, 50/60 HZ, AC |
| J-C-30 Revision B:1989 | CABLE AND WIRE, ELECTRICAL (POWER, FIXED INSTALLATION) |
| MIL-R-36557 Revision C:1984 | REGULATOR, PRESSURE, MEDICAL GAS ADMINISTRATION APPARATUS |
| MIL M 29212 : B NOTICE 1 | MIXING PLANT, ASPHALT, DRUM TYPE, PORTABLE, ELECTRIC MOTOR DRIVEN, 120 TONS PER HOUR CAPACITY |
| MIL-B-7838 Revision C:1989 | BOLT, INTERNAL WRENCHING 160 KSI FTU |
| MIL-N-8984 Base Document:1972 | NUT, SELF-LOCKING, STEEL, 260 KS1 FTU 450 DEGREES F |
| MIL-N-8985 Base Document:1972 | NUT, SELF-LOCKING STEEL, 180 KS1 FTU 450 DEGREES F |
| MIL-S-503 Revision B:1988 | SIREN, ELECTRIC, 2 AND 5 HORSEPOWER |
| MIL-DTL-55507 Revision F:1997 | SHELTER, ELECTRICAL EQUIPMENT (WITH OR WITHOUT EQUIPMENT) PACKAGING OF |
| MIL-C-37220 Base Document:1976 | CENTRIFUGE, LABORATORY 115 VOLT 50/60 HZ |
| MIL-B-43866 Revision C:1986 | BREAD-SLICING MACHINE, ELECTRIC-OPERATED, MULTIPLE KNIFE |
| MIL V 5523 : D | VALVE, RELIEF, HYDRAULIC PRESSURE |
| MIL-B-28658 Revision E:1991 | BUILDING COMPONENTS, PANELIZED, PREFABRICATED, READY-CUT, RELOCATABLE |
| GG-S-00800 Base Document:1965 | SUCTION APPARATUS, SURGICAL, AUTOMATIC, THERMOTIC, MOBILE, 110 VOLT, AC-DC |
| MIL-C-11085 Revision D:1986 | CONVEYOR, BELT; (FLAT, SKID-MOUNTED, ELECTRIC-MOTOR-DRIVEN, 24-INCH-WIDE BELT, 50-FOOT-LONG FRAME; CAPACITY, 25 POUNDS PER FOOT, 75 TONS PER HOUR) |
| GG-G-76 Revision E:1980 | GAGES, PRESSURE AND VACUUM, DIAL INDICATING (FOR AIR, STEAM, OIL, WATER, AMMONIA, CHLORO-FLUORO HYDROCARBON GASES, AND COMPRESSED GASES) |
| MIL-B-29171 Revision B:1991 | BUILDINGS, RELOCATABLE, INSULATED, METAL, FOLDING FRAME |
| MIL-A-36926 Revision A:1974 | ANALYZING KIT, MEAT FAT CONTENT 115 VOLT, 60 HZ |
| MIL-C-47221 Revision A:1982 | COMPOUND, MOLDING, EPOXY RESIN, SILICON DIOXIDE AND ASBESTOS FIBER FILL |
| MIL-P-46847 Revision B:1984 | PLASTIC MATERIAL, FOAMED POLYURETHANE FOR ENCAPSULATING ELECTRONIC COMPONENTS |
| MIL-C-85521 Base Document:1983 | CONCENTRATOR, OXYGEN, GGU-7/A |
| QQ-M-56 Revision B:1960 | MAGNESIUM ALLOY, SAND CASTINGS |
| MIL-P-71012 Revision A:1994 | PISTOL, SEMIAUTOMATIC, COMPACT, 9MM: M11 |
| MIL-P-16789 Revision D:1986 | PUMPS (INCLUDING PRIME MOVERS AND SUPPORT ITEMS); PACKAGING OF |
| L-P-509 Revision A:1965 | PLASTIC SHEET, ROD AND TUBE, LAMINATED, THERMOSETTING |
| MIL-E-52715 Revision C:1992 | ERECTION AND MAINTENANCE EQUIPMENT FOR CABLE REINFORCEMENT SET FOR PANEL BRIDGE M-2 (BAILEY TYPE) |
| MIL-P-22046 Base Document:1959 | POWER SUPPLY MARK 20 MOD 1 |
| MIL I 7067 : B | INDICATOR, POSITION, FLAPS, 0 - 60 DEGREE MARKING, 2 INCH SIZE |
| MIL-P-52979 Base Document:1980 | POWER PLANT, ELECTRIC, TRAILER MOUNTED, DIESEL ENGINE, 60 KW, 50/60 HERTZ, AN/MJQ-12A |
| MIL-S-26547 Revision C:1985 | STARTER-GENERATOR ENGINE STU-6A |
| MIL-B-13831 Revision J:1985 | BOAT, RECONNAISSANCE, PNEUMATIC: 3-MAN |
| MIL-C-26861 Revision C:1988 | CUSHIONING MATERIAL, RESILIENT TYPE, GENERAL |
| MIL-W-10430 Revision D:1994 | WELDING RODS AND ELECTRODES, PACKAGING OF |
| SAE AS 8712 : 2013 | VALVE; AIR RELIEF, LOW PRESSURE |
| MIL C 19647 : A | CORROSION REMOVING COMPOUND, PASTE (PHOSPHORIC ACID BASE) |
| MIL-C-55038 Revision A:1963 | CHARGER, RADIAC DETECTOR, PP-1578 ( )/PD |
| WW-H-1053 Revision A:1987 | HOSE, METAL (FLEXIBLE, ALUMINUM ALLOY, CORROSION RESISTANT AND HEAT RESISTANT STEEL) |
| MIL-B-52199 Revision C:1992 | BRACKET, OUTBOARD MOTOR, FOR ALUMINUM HALF PONTOON |
| MIL-L-7806 Revision A:1956 | LIGHT, PANEL, PLASTIC PLATE, LIGHTING |
| MIL V 13803 : E | VALVE, GATE, DOUBLE DISC, CAST IRON OR STEEL |
| MIL-M-17185 Revision A:1956 | MOUNT, RESILIENT, GENERAL SPECIFICATION AND TESTS FOR (SHIPBOARD APPLICATION) |
| GG-T-35 Revision C:1989 | TABLE; DRAWING, TRACING, AND SCRIBING |
| MIL-M-52677 Revision A:1975 | MULTIPLEX SECTION, TOPOGRAPHIC MAPPING SET TRUCK MOUNTED, PACKAGING OF |
| MIL-H-4607 Revision E:1987 | HEATER, ENGINE AND SHELTER, GROUND |
| MIL-A-49095 Revision A:1976 | AMPLIFIER, AUDIO FREQUENCY AM-6747()/V |
| MIL-M-19417 Revision D:1992 | Mask Assemblies, Oxygen and Smoke, Full Face |
| MIL R 46846 : B | RUBBER, SYNTHETIC, HEAT-SHRINKABLE |
| MIL-C-11029 Revision D:1987 | CITRIC ACID, TECHNICAL |
| GG H 00590 : NOTICE 1 | HOLDER, RADIOGRAPHIC FILM CASSETTE |
| MIL-M-13189 Revision A:1954 | MICROPHONE-ELEMENTS, CARBON AND EARPHONE ELEMENTS, MAGNETIC (FOR TELEPHONE AND RADIO USE) |
| MIL-DTL-62533 Revision A:1995 | CARRIER, CARGO, TRACKED, 22-TON, AMMUNITION MEDIUM: M992/A1/A2; PROCESSING FOR STORAGE AND SHIPMENT OF |
| MIL-L-45779 Revision C:1984 | LOADER-TRANSPORTER, GUIDED MISSILE, XM501E2 AND XM501E3 PROCESSING FOR STORAGE AND SHIPMENT OF |
| DOD-P-24562 Revision A:1982 | PROPELLERS, SHIP, CONTROLLABLE PITCH (METRIC) |
| GGG-H-211 Revision D:1985 | HELMETS, WELDERS'; HANDSHIELD, WELDING; AND PLATES, WELDING |
| MIL C 47009 : B | COMPOUND, SILICONE, HEAT SINK |
| MIL P 53022 : B | PRIMER, EPOXY COATING, CORROSION INHIBITING, LEAD & CHROMATE FREE |
| MIL G 17927 : C | GASKET, ASBESTOS METALLIC COVER, RUBBER CORE |
| MIL-D-12491 Revision E:1989 | DEGREASER, SOLVENT, TANK IMMERSION TYPE |
| MIL A 28875 : 0 | AMPLIFIER, RADIO FREQUENCY AND MICROWAVE, SOLID STATE, GENERAL SPECIFICATION FOR |
| MIL P 5425 : D | PLASTIC, SHEET, ACRYLIC, HEAT RESISTANT |
| MIL-C-0010597 Revision F:1994 | CLEANING COMPOUND WITH CONDITIONER FOR ENGINE COOLING SYSTEMS |
| O-C-303 Revision D:1985 | CHROMIUM TRIOXIDE, TECHNICAL |
| MIL-G-25507 Revision B:1991 | GAGE, PRESSURE, DIAL INDICATING, OXYGEN 0-2000 PSI |
| MIL-V-10386 Revision E:1977 | SWING, CAST-IRON AND STEEL |
| PPP-P-1136 Revision D:1986 | PACKAGING OF COATED (PLASTIC; RUBBER) AND LAMINATED FABRICS |
| PPP-C-1683 Revision A:1988 | CUSHIONING MATERIAL, EXPANDED POLYSTYRENE LOOSE FILL BULK (FOR PACKAGING APPLICATION) |
| MIL-C-13962 Revision B:1966 | CRUSHING, SCREENING, AND WASHING PLANTS, DIESEL-ENGINE AND ELECTRIC-MOTOR DRIVEN, 225-TONS PER HOUR |
| MIL-R-0036837 Revision A:1972 | RACK, TEST TUBE, LABORATORY, POLYPROPYLENE |
| MIL F 39000 : A | FLANGES, WAVEGUIDE, RIDGE GENERAL SPECIFICATION FOR |
| GG-T-671 Revision F:1981 | TRIANGLES, DRAFTING: LINE GUIDES, LETTERING, ADJUSTABLE AND NONADJUSTABLE (GENERAL SPECIFICATION) |
| MIL-R-23461 Revision A:1987 | RESIN COMPOUND, THERMOSETTING, ROOM TEMPERATURE CURING, FOR METAL COATING |
| MIL-F-63067 Base Document:1976 | FUZE, M539, POWER SUPPLY FOR PARTS FOR, ASSEMBLING AND PACKING |
| MIL-T-21671 Base Document:1958 | TEST SET MARK 126 MOD 0 |
| MIL-S-12840 Revision H:1992 | SADDLE ASSEMBLY, STEEL AND PLYWOOD, FOR 24-TON, 2-PART PNEUMATIC FLOAT, PONTOON BRIDGE |
| MIL S 8516 : F | SEALING COMPOUND, POLYSULFIDE RUBBER, ELECTRIC CONNECTORS AND ELECTRICAL SYSTEMS CHEMICALLY CURED |
| MIL-P-47215 Revision B:1992 | PRIMER, ABLATIVE RESISTANT COATING |
| MIL-STD-726 Revision H:1985 | PACKAGING REQUIREMENTS CODE |
| MIL-T-52957 Revision A:1978 | TEST SET, POWER SUPPLY FOR POSITION & AZIMUTH DETERMINING SYSTEM, AN/USM-428 |
| MIL-A-3816 Revision F:1992 | ABRASIVES AND ABRASIVE PRODUCTS; PACKAGING OF |
| MIL-D-3716 Revision B:1987 | DESICCANTS, ACTIVATED FOR DYNAMIC DEHUMIDIFICATION |
| MIL-F-63068 Base Document:1976 | FUZE, M539, IMPACT SWITCH ASSEMBLY FOR PARTS FOR, ASSEMBLING AND PACKING |
| HH-F-341 Revision F:1973 | FILLERS, EXPANSION JOINT: BITUMINOUS (ASPHALT AND TAR) AND NONBITUMINOUS (PREFORMED FOR CONCRETE) |
| MIL-R-52928 Base Document:1977 | RESERVOIR SYSTEM, FABRIC, COLLAPSIBLE, 25,000 BBL, PETROLEUM, PACKAGING OF |
| AA-C-001402 Base Document:1986 | CABINET, PROTECTIVE STORAGE AND FILING, UNINSULATED, WITH COMBINATION PADLOCK |
| MIL D 12817 : A | DRAFTING EQUIPMENT SET, BATTALION; SET 1, PACKAGING OF |
| AA-D-195 Revision B:1961 | DESK, FLAT TOP, STEEL, CONFERENCE TYPE |
| MIL-P-20385 Revision E:1982 | PROTRACTORS, SEMICIRCULAR, PLASTIC, GRADUATED IN MILS, YARDS, METERS AND INCHES |
| FF-L-2740 Revision A:1997 | LOCKS, COMBINATION |
| MIL-R-27777 Revision B:1973 | RELAY, TELEGRAPH, PASSIVE, SOLID STATE, GENERAL SPECIFICATION FOR |
| MIL-T-52983 Revision G:1994 | TANK, FABRIC, COLLAPSIBLE, 3,000 10,000 20,000 AND 50,000 GALLON, FUEL |
| MIL-L-13188 Revision C:1984 | LEATHER, CATTLEHIDE, CHROME TANNED, HYDRAULIC PACKING FOR RECOIL MECHANISMS |
| MIL C 7958 : A | CONTROL, PUSH PULL, FLEXIBLE AND RIGID |
| MIL-T-12236 Revision A:1975 | TEST SET, ELECTRICAL POWER (TEST SET 1-199) |
| MIL G 14305 : *DUPLICATE RECORD* | **DUPLICATE RECORD** |
| MIL R 0043003 : E | RELEASE, CARGO PARACHUTE, 5000 POUND CAPACITY |
| GG-T-00311 Revision B:1967 | THERMOMETERS, SELF-INDICATING, MERCURY IN GLASS (FEVER) |
| MIL-C-38392 Revision A:1969 | COMPRESSOR, HERMETIC, AIR CONDITIONING, GENERAL SPECIFICATION FOR |
| MIL-M-70466 Base Document:1993 | MACHINE GUN, 7.62mm: M60E3 |
| MIL-T-52964 Base Document:1979 | TOPOGRAPHIC SUPPORT SYSTEM OPERA STORAGE & RETRIEVAL, DISTRIBUTION DRAFTING SUPPORT, COMPILATION, SURVEY, RECTIFIER I & II MOSAICKING DRAFTING, COLLECTION, ANALYSIS, INFORMATION AND SYNTHESIS SECTIONS, SEMITRAILER MOUNTED |
| MIL H 13253 : D | HANDSETS, GENERAL SPECIFICATION FOR |
| MIL-C-52648 Revision D:1993 | CRANE, CRAWLER MOUNTED, 40 TON AT 12 FOOT RADIUS, 2 CUBIC YARD, DIESEL-ENGINE DRIVEN |
| MIL-B-16755 Revision B:1964 | BOTTLE, NURSING, WIDE MOUTH |
| GG-D-635 Revision D:1984 | DRAWING BOARD AND DRAWING BOARD TRESTLES |
| MIL F 24044 : 0 | FLANGE, COAXIAL LINE, RIGID AIR DIELECTRIC, GENERAL SPECIFICATION FOR |
| PPP-P-1133 Revision C:1983 | PACKAGING OF SYNTHETIC FIBER FABRICS |
| MIL F 28861 : B | FILTER AND CAPACITOR, RADIO FREQUENCY/ELECTROMAGNETIC INTERFERENCE SUPPRESSION, GENERAL SPECIFICATION FOR |
| MIL-B-42079 Base Document:1994 | BRACE ASSEMBLY ADJUSTABLE BED |
| MIL-R-8931 Revision A:1994 | RESERVOIRS, AIRCRAFT AND MISSILE, HYDRAULIC SEPARATED TYPE |
| MIL-A-36194 Base Document:1964 | ANVIL, OPTICIAN'S, RIVETING |
| W-B-411 Revision A:1961 | BLASTING MACHINE, GALVANOMETER, BLASTING, RESISTOR ASSEMBLY |
| MIL-T-52332 Revision B:1991 | TOOL, HORIZONTAL CONNECTING, ERECTION EQUIPMENT FOR BRIDGE, FLOATING, PNEUMATIC FLOAT CLASS 60 |
| GG-S-161 Revision D:1985 | SCALES, DRAFTING, AND SCALES, PLOTTING (GENERAL SPECIFICATION) |
| MIL D 24709 : 0 | DISTRIBUTED ISOLATION MATERIAL TYPE R-50-21/64 |
| MIL-D-83029 Revision A:1968 | DRIVE ASSEMBLY, CONSTANT SPEED, GENERAL SPECIFICATION FOR |
| MIL-T-14091 Revision E:1988 | TRIPOD, SURVEYING, EXTENSION-LEG-TYPE |
| MIL-P-22241 Revision B:1973 | PLASTIC SHEET (AND FILM) POLYTETRAFLUOROETHYLENE (TFE-FLUOROCARBON RESIN) |
| MIL-C-5778 Revision D:1992 | COVER, AIRCRAFT COMPONENTS, GENERAL REQUIREMENTS FOR |
| GG I 00521 : NOTICE 1 | INDICATOR, STERILIZATION |
| MIL-G-53010 Base Document:1982 | GENERATOR SET, DIESEL ENGINE, TRAILER MOUNTED, 100 KW, 50/60 HERTZ, PU-495B/G |
| MIL R 83178 : A | REGULATOR, OXYGEN, DILUTER DEMAND, AUTOMATIC PRESSURE BREATHING, GENERAL SPECIFICATION FOR |
| MIL-N-37283 Revision A:1976 | NORGESTREL AND ETHINYL ESTRADIOL TABLETS USP |
| MIL-M-55638 Base Document:1970 | METER MODULATION ME-57 ( )/U |
| MIL-I-25091 Revision B:1985 | INDICATOR, CABIN AIR PRESSURE, PRESSURIZED AIRCRAFT, 1-7/8 INCH DIAL, TYPE MA-2 |
| MIL C 6458 : C | CHAIN ASSEMBLY, SINGLE LEG, AIRCRAFT CARGO TIE DOWN |
| MIL-T-11776 Revision E:1988 | TABLE, LITHOGRAPHIC LAYOUT, TILT TOP, 24 INCH BY 30, INCH, NOMINAL ILLUMINATED AREA |
| MIL-R-43003 Revision F:1994 | RELEASE, CARGO PARACHUTE, 5,000 POUND CAPACITY |
| MIL-B-53083 Base Document:1988 | BAG, WATERPROOF, LOAD CARRYING; SPECIAL OPERATIONS WATERPROOF BAG (SOWB) |
| MIL-C-42061 Base Document:1988 | CAP, SCREW, BOTTLE AND JAR |
| MIL-R-43608 Revision A:1981 | RIP CORD, PARACHUTE, PERSONNEL: GENERAL SPECIFICATION FOR |
| MIL-P-22968 Revision B:1984 | PAPER, RECORDING, HEAT SENSITIVE |
| MIL F 51353 : A NOTICE 1 | FUZE, HAND GRENADE, M201A1 |
| MIL-R-42043 Base Document:1987 | REGULATOR, OXYGEN |
| MIL-F-45687 Base Document:1961 | FIRE CONTROL ELECTRONIC CALIBRATION STANDARDS, PACKAGING OF |
| MIL G 26611 : D | GENERATOR, TACHOMETER GEU-7/A, MINIATURE |
| MIL-S-3419 Revision B:1968 | SHOP EQUIPMENT, CARTOGRAPHIC INSTRUMENT REPAIR, FIELD MAINTENANCE, PACKAGING OF |
| AA C 0010 : B | CABINET, BEDSIDE, METAL, HOSPITAL TYPE |
| GG-W-239 Revision C:1985 | WHEELS, ABRASIVE, (SILICON CARBIDE, MOUNTED, DENTAL) |
| MIL-R-43010 Revision B:1988 | REMOULDING SET, SOIL & COMPACTION |
| MIL-T-1205 Revision C:1961 | THERMOMETER, SELF INDICATING, LIQUID IN GLASS, AIR AND WATER, STANDARD |
| MIL-A-27195 Revision A:1989 | ACCELEROMETER, AIRCRAFT, MECHANICAL ABU-6/A |
| MIL-A-6589 Revision A:1968 | AMPLIFIER, ELECTRONIC CONTROL, SINGLE CHANNEL, TYPE A-2 |
| JJJ-A-20 Base Document:1958 | ACACIA, TECHNICAL (GUM ARABIC) |
| MIL-B-3067 Revision B:1959 | BRIDGE RESISTANCE (RESISTANCE BRIDGE ZM-4) (1U (ADDENDUM (1))) |
| MIL-D-3344 Revision D:1990 | DIVING EQUIPMENT SET, TWO PERSONS 100 FOOT DEPTH, PACKAGING OF |
| MIL-T-49124 Base Document:1977 | TEST SET, LASER RANGEFINDER, TS-3620( )/GVS-5 |
| NNN-T-001293 Base Document:1996 | TUBE BLOOD COLLECTING VACUUM NONSTERILE |
| P-D-240 Base Document:1960 | DETERGENT, SURGICAL |
| MIL-P-15035 Revision C:1962 | PLASTIC SHEET, LAMINATED, THERMOSETTING, COTTON FABRIC BASE, PHENOLIC RESIN |
| L-L-330 Revision B:1974 | LINER, PLASTIC, WASTE RECEPTACLE |
| MIL-P-514 Revision D:1966 | PLATE, IDENTIFICATION, INSTRUCTION AND MARKING BLANK |
| MIL W 3662 : B | WIRE, PLATINUM ALLOY [PLATINUM RUTHENIUM, PLATINUM IRIDIUM |
| MIL-E-83510 Revision A:1980 | EARPHONE ELEMENT |
| MIL-DTL-62015 Revision G:1995 | CARRIER, CARGO, FULL-TRACKED, M548A1 AND M548A3 - PROCESSING FOR STORAGE AND SHIPMENT OF |
| MIL-W-52875 Revision B:1983 | WATER QUALITY ANALYSIS SET: PREVENTIVE MEDICINE |
| MIL-B-10154 Revision C:1961 | Batteries, Primary, Water-Activated (Dunk Type) (No S/S Document) |
| MIL-M-52673 Base Document:1970 | MAP REVISION SECTION, TOPOGRAPHIC MAPPING SET, TRUCK MOUNTED PACKING OF |
| MIL-A-36188 Revision B:1989 | APRON, DENTAL, PLASTIC |
| AA-S-698 Revision B:0196 | STOOL, STRAIGHT |
| MIL M 26542 : D (1) SUPP 1 | MICROPHONE, DYNAMIC, GENERAL SPECIFICATION FOR |
| MIL-B-23958 Revision A:1967 | BRUSH, CLEANING, AIRCRAFT, METAL BRIGHTENING |
| L-P-508 Revision H:1977 | PLASTIC SHEET, LAMINATED, DECORATIVE AND NONDECORATIVE |
| MIL-P-38199 Revision B:1971 | PAD, PARACHUTE HARNESS, QUICK RELEASE |
| PPP-P-1937 Base Document:1976 | PREPARATION FOR DELIVERY REQUIREMENTS FOR DESKS, STEEL, FLAT TOP CONTEMPORARY STYLE |
| MIL-A-2402 Revision D:1978 | ADAPTER, STEREOPLOTTER PROJECTOR, TILT, WITH CONDENSER CLIP (FOR MULTIPLEX) |
| MIL V 6164 : E | VALVE, AIRCRAFT, AIR HIGH PRESSURE |
| MIL-A-36950 Base Document:1973 | ASPIRATOR UNIT, SUCTION-PRESSURE APPARATUS |
| MIL-T-52823 Revision A:1983 | TARGET SET, SURVEYING |
| NNN-C-1698 Revision A:1975 | COUNTER BLOOD CELLS DIFFERENTIAL |
| NNN-C-1434 Revision C:2004 | COVER GLASS MICROSCOPE SLIDE |
| GGG-W-301 Revision B:1963 | WHEEL, BUFFING AND POLISHING |
| MIL-P-14591 Revision D:1976 | PLASTIC FILM, NONRIGID, TRANSPARENT |
| MIL-R-81553 Revision B:1992 | REGULATOR, CHEST MOUNTED, OXYGEN, POSITIVE PRESSURE, CRU-79/P |
| MIL-A-85481 Base Document:1981 | ARMING WIRE ASSEMBLIES |
| GG-R-1971 Base Document:1976 | RETRACTOR, RIB, HARKEN |
| MIL H 12487 : B NOTICE 1 | HEADSET ELECTRICAL (HEADSETS ELECTRICAL H-16)(/U AND HEADSETS H-65)(/U |
| MIL-T-52820 Revision A:1979 | TABLE, DRAWING, STEEL |
| MIL-B-52251 Revision C:1988 | BRACKET, SLING ATTACHMENT, FOR BEAMS AND GIRDERS OF LINE OF COMMUNICATION BRIDGES |
| GG-I-00552 Base Document:1964 | |
| MIL-C-55416 Base Document:1965 | CODER BURST TRANSMISSION GROUP AN GRA 71() (UNITS OF) |
| MIL-T-52806 Revision A:1980 | TABLE, VEHICULAR-MOUNTED, FLAT TOP, 2 DRAWER |
| NNN-S-636 Revision C:1975 | PLATE SPOT TEST WHITE PORCELAIN |
| MIL-F-51465 Revision A:1987 | FUZE, FLOATING SMOKE POT, M207A1 |
| GG-S-1616 Revision A:1987 | SCISSORS, COLLAR AND CROWN |
| GG-B-735 Revision B:1985 | BRUSH, BRISTLE, DENTAL HANDPIECE (MANDREL MOUNTED) |
| FED-STD-803 Base Document:1991 | PACKAGING OF COTTON & COTTON SYNTHETIC FIBER BLEND FABRICS (EXCLUDING DUCK FABRICS) |
| MIL-H-1679 Revision F:1992 | HOOK, TENT; WITH THIMBLE, FOR GUY LINE, ASSEMBLY TENT |
| MIL H 83511 : 0 | HEADSET-MICROPHONE AND HEADSET-ELECTRICAL (MEDIUM NOISE ATTENUATION, HEARING PROTECTIVE), GENERAL SPECIFICATIONS FOR |
| GG-W-101 Revision B:1957 | WASHERS, BEDPAN AND URINAL |
| MIL-A-38462 Revision B:1970 | AIR CONDITIONER A/E32C-30 |
| QQ-C-525 Revision B:1962 | COPPER ALLOY INGOTS, LEADED AND NONLEADED TIN BRONZE, RED BRASS, AND SEMI RED BRASS) |
| GGG-F-00340 Base Document:1965 | FILE, ROTARY |
| MIL-T-23132 Revision A:1972 | TUNGSTEN DELAY COMPOSITION |
| MIL-F-8839 Revision A:1988 | FITTING, LUBRICATION, DRIVE TYPE |
| MIL P 18906 : 0 | PROPELLANT GRAIN, CYLINDRICAL, FOR ROCKET MOTORS |
| MIL T 17188 : D | TUBE, CARBON STEEL, ELECTRIC RESISTANCE WELDED, MARINE BOILER |
| GG L 256 : E | LETTERING SETS AND ACCESSORIES |
| UU-B-368 Revision B:1992 | BINDER, LOOSE-LEAF, SPRING BACK |
| MIL-R-23811 Base Document:1963 | RECORDER ASSEMBLY (FOR TORPEDO EXERCISE SECTION MARK 64 MOD 2) |
| MIL T 25446 : D | TRANSMITTER, TEMPERATURE, ELECTRICAL RESISTANCE |
| GG C 00129 : A NOTICE 1 | CART, CLINICAL CHART HOLDER |
| MIL-P-46036 Revision B:1973 | PLASTIC SHEET, RODS, TUBES AND DISCS, POLYCHLOROTRIFLUOROETHYLENE |
| MIL-H-9850 Revision C:1977 | HINGE, BUTT, CONTINUOUS, PIANO |
| MIL-B-37484 Base Document:1976 | BEAKER-FLASK, LABORATORY |
| GG-C-00110 Revision A:1971 | CALIPER, X-RAY TECHNIQUE |
| MIL C 45918 : 0 | CLEVISES AND CONNECTORS (ROD END) |
| MIL-A-55468 Revision A:1976 | ANTENNA GROUP OE-4()/GR |
| MIL E 8971 : B | ELECTRODES, GRAPHITE, SPECTROSCOPIC GRADE |
| MIL-STD-1187 Base Document:1976 | STANDARD SIZE UNIT, INTERMEDIATE AND EXTERIOR CONTAINERS FOR MODULAR PACKAGING AND UNITIZATION ON THE 40 INCH PALLET |
| DD-S-720 Revision A:1960 | STOPCOCK, LABORATORY APPARATUS, TAPER-GROUND |
| GG-H-1970 Base Document:1976 | HOLDER, SUTURE NEEDLE, CASTROVIEJO, 5-1/2 INCH |
| MIL P 52955 : A | POSITION & AZIMUTH DETERMINING SYSTEM (PADS), AN/USQ-70(U) |
| MIL G 52888 : A | GENERATOR SET, DIESEL ENGINE, TRAILER MOUNTED 100 KW, 50/60 HERTZ, PU-495A/G |
| MIL-L-21321 Base Document:1958 | LEAD, ELECTRICAL (STORAGE BATTERY) |
| MIL-C-8603 Revision B:1984 | CLAMPS, LOOP TYPE, AND STRAPS, SUPPORT |
| MIL F 83860 : C | FILTER ELEMENTS, NONCLEANABLE, FLUID PRESSURE, HYDRAULIC LINE, 5 MICRON ABSOLUTE, TYPE II, SYSTEMS, GENERAL SPECIFICATION FOR |
| ASTM F 1245 : 1989 : R2012 | Standard Specification for Faucets, Single and Double, Compression and Self-Closing Type, Shipboard |
| MIL-S-11031 Revision B:1963 | SEALING COMPOUND, ADHESIVE. CURING (POLYSULFIDE BASE) |
| MIL-G-46723 Revision C:1981 | GUN, SELF PROPELLED, FULL TRACKED, 175MM, M107 & HOWITZER, SELF PROPELLED, FULL TRACKED, 8 INCH, M110A1 & M110AZ, PROCESSING FOR STORAGE & SHIPMENT OF |
| MIL-T-21674 Base Document:1958 | TEST SET MARK 177 MOD O |
| MIL-R-9208 Revision B:1968 | REPAIR MATERIAL, FOR SELF SEALING FUEL TANKS |
| MIL-D-52840 Base Document:1975 | DETECTOR, BATCH INTERFACE |
| JJ-B-178 Revision B:1957 | BELT, ROUND (DENTAL ENGINES) |
| GG-S-1341 Revision A:1975 | WASHER-STERILIZER, SURGICAL INSTRUMENT |
| MIL-F-14614 Revision D:1979 | FRAME AND TABLE ASSEMBLY, STEREOPLOTTER, PROJECTION, MULTIPLEX, 32-INCH LENGTH WITH CHEST |
| QQ-C-390 Revision B:1983 | COPPER ALLOY CASTINGS (INCLUDING CAST BAR) |
| MIL-B-29159 Revision A:1989 | BOAT SYSTEM, UTILITY, NOMINAL, 20-FOOT REINFORCED PLASTIC WITH 100-HORSEPOWER OUTBOARD ENGINE AND TRAILER |
| MIL-N-51314 Base Document:1952 | NICKEL NITRATE, HEXAHYDRATE, ANALYZED REAGENT |
| MIL-S-6150 Revision D:1987 | STARTER, ENGINE, ELECTRICAL, DIRECT CRANKING, AIRCRAFT 28 VOLT DC |
| MIL-T-62050 Revision B:1985 | TANK, COMBAT, FULL TRACKED, 105MM, GUN, M48A5, PROCESSING FOR STORAGE AND SHIPMENT OF |
| MIL-C-539 Revision A:1976 | CLOTH, SILK, CARTRIDGE BAG |
| MIL-P-83927 Revision B:1981 | POWER SUPPLIES, GUIDED MISSILE LAUNCHERS, SINGLE TYPES PP-2401B/A PP-2401C/A PP-2401D/A, PP-4285/A, PP-4286/A, AND COMPOSITE TYPE PP-4506/A AND PS-1037 |
| MIL-P-58102 Base Document:1978 | PLASTIC SHEET AND LAMINATES, FLEXIBLE FOR ENVIRONMENTAL PROTECTIVE STORAGE AND SHIPPING SYSTEMS |
| MIL R 19648 : C | RELAY, TIME DELAY, THERMAL GENERAL SPECIFICATION FOR |
| MIL S 43176 : C | SCREEN, LATRINE, FIRE, WATER, WEATHER AND MILDEW-RESISTANT TREATED, O.D. |
| MIL A 85097/2 : D | AIRCREW ESCAPE PROPULSION SYSTEMS (AEPS), CATAPULT CARTRIDGES, MARK 198 MOD 1 AND MARK 205 MODS O AND 1 |
| MIL-F-24666 Base Document:1986 | FILTER ELEMENT, SHIP FUEL SYSTEM PREFILTER, NONCLEANABLE, HIGH EFFICIENCY |
| MIL-R-11764 Revision A:1960 | RESISTOR, DECADE ZM-16 ()/U |
| MIL-H-11511 Revision G:1980 | HEATER, SPACE, MULTIFUEL, WITH BLOWER 60,000 BTU/HR |
| MIL-A-11210 Revision G:1981 | AIR CONDITIONERS: BASE MOUNTED, SELF-CONTAINED, MULTIPACKAGE-TYPE, AIR-COOLED, ELECTRIC-MOTOR-DRIVEN, 18,000 - BTU/HR |
| SAE AMS R 6130 : 2001 | RUBBER, CELLULAR, CHEMICALLY BLOWN |
| MIL L 58085 : A | LIGHT, BEACON, ANTI COLLISION AIRCRAFT |
| MIL-G-36683 Base Document:1970 | GAGE, FRUIT AND VEGETABLE SIZING |
| MIL A 55359 : 0 | ANTENNA AS-1304 ( ) /ARN-30 |
| DDD-B-40 Revision A:1958 | BANDAGE, CANTON FLANNEL |
| MIL P 51395 : A | POWER SUPPLY, CHEMICAL AUTOMATIC ALARM, ABCA-M10 |
| NNN-P-40 Revision B:1973 | PAPER LENS |
| MIL-S-52377 Revision D:1990 | SHOP EQUIPMENT, ELECTRONIC REPAIR, SEMI TRAILER MOUNTED |
| MIL-P-10603 Revision E:1990 | PUMP AND PUMPING UNITS, CENTRIFUGAL, POWER-DRIVEN FOR WATER PACKAGING OF |
| MIL B 18367 : 0 | BEARINGS, ROLLER, CYLINDRICAL, RADIAL AND THRUST, SPECIAL PRECISION |
| MIL B 81705 : C | BARRIER MATERIALS, FLEXIBLE, ELECTROSTATIC FREE HEAT SEALABLE |
| MIL-B-29165 Revision A:1982 | BUILDINGS, PREFABRICATED, PANELIZED: WOOD, ONE-ROOM, ARCTIC CLIMATE |
| MIL-T-3618 Revision C:1969 | THERMOMETER, SELF INDICATING, BIMETALLIC |
| MIL-M-11726 Revision E:1982 | MANIFOLD, AIR LINE, ONE TO SEVEN OUTLETS |
| MIL N 3451 : B NOTICE 1 | NAVIGATION SET, LAND VEHICULAR, POSITION OBTAINED BY DEAD RECKONING, PACKAGING OF |
| MIL-C-17223 Revision A:1959 | CLEANER, WELDING AND CUTTING TIP |
| MIL-G-25871 Revision B:1978 | GLASS, LAMINATED, AIRCRAFT GLAZING |
| MIL-L-52366 Revision C:1984 | LOAD BANK, AC 0-33KW RESISTIVE |
| MIL I 38715 : B | INDICATOR, COMBUSTIBLE GAS AND TOXIC GAS |
| MIL-B-42017 Base Document:1986 | BUR, BONE SURGERY (TUNGSTEN CARBIDE), GENERAL REQUIREMENTS FOR |
| MIL-B-15894 Revision B:1966 | BRASS: DIE CASTINGS |
| MIL-M-13786 Base Document:1954 | MOTOR, FRACTIONAL HORSEPOWER, DIRECT CURRENT AND UNIVERSAL (FOR COMMUNICATION AND OTHER ELECTRONIC AND SPECIAL MILITARY APPLICATIONS). VALIDATED MAR 1965 |
| GG-S-935 Revision A:1977 | SYRINGES, HYPODERMIC, NEEDLE LOCK, GLASS, 3 ML (CC) |
| SAE AMS P 46144 : 2015 | PLASTIC SHEET, POLYCARBONATE |
| MIL-C-36416 Revision C:1978 | CENTRIFUGE LABORATORY HEMATOLOGY SMALL |
| MIL-T-53055 Revision C:1991 | TANK, 3,000 GALLON & 4600 GALLON FABRIC, COLLAPSIBLE, DRINKING WATER, SEMI-TRAILER MOUNTED |
| MIL H 49092 : 0 | HEADSET MICROPHONE H-325( )/TTC |
| MIL-F-52594 Revision A:1975 | FLOODLIGHT SET, ELECTRIC, PACKAGING OF |
| MIL-P-44247 Base Document:1936 | PACK, PARACHUTIST S, AT4 ROCKET |
| MIL-S-40059 Revision E:1989 | SEPARATORS, SUSPENSION LINE, PARACHUTE |
| L-P-527 Revision B:1973 | PLASTIC SHEET, STYRENE-BUTADIENE |
| MIL S 83352 : B | SIGNAL KIT, PERSONNEL, DISTRESS, A/P25S-5A |
| MIL-B-16924 Revision C:1972 | BLOOD RECIPIENT SET, INDIRECT TRANSFUSION |
| MIL-A-55138 Revision B:1965 | ANTENNA AT-784()/PRC |
| MIL P 15024 : E | PLATES, TAGS AND BANDS FOR IDENTIFICATION OF EQUIPMENT |
| MIL-P-52855 Revision A:1979 | POWER PLANT, ELECTRIC, TRAILER MOUNTED, DIESEL ENGINE 15 KW, 400 HERTZ AN/MJQ-15 |
| MIL C 4928 : A | CHARGER, BATTERY, SILICON DIODE, TYPE A-1 |
| MIL-C-29475 Base Document:1994 | COATING, WATER BORNE POLYURETHANE CAMOUFLAGE |
| DD-B-00582 Base Document:1964 | BOTTLE, EYE IRRIGATING, ZIEGLER |
| SAE AMS P 46112 : 2002(S2015) | PLASTIC SHEET AND STRIP, POLYIMIDE |
| NASM 7838 : 2004 | BOLT, INTERNAL WRENCHING, 160 KSI FTU |
| SAE AMS P 21922 : 2016 | PLASTIC RODS AND TUBES, POLYETHYLENE |
| SAE AMS R 83248 : 2005 | RUBBER, FLUOROCARBON ELASTOMER, HIGH TEMPERATURE, FLUID, AND COMPRESSION SET RESISTANT |
| MIL-P-53087 Base Document:1989 | POWER PLANT, ELECTRIC, DIESEL ENGINE-DRIVE, TRAILER MOUNTED, 3KW, 60 HERTZ, AN/MJQ-32 |
| MIL-F-2763 Revision B:1966 | FILTER, LIGHT, OPTICAL INSTRUMENT, BINOCULAR |
| MIL F 3922 : B | FLANGE, WAVEGUIDE, GENERAL PURPOSE GENERAL SPECIFICATION FOR |
| MIL-A-52435 Revision D:1984 | AIR CONDITIONER: BASE MOUNTED, AIR-COOLED, 208-VOLT, 3-PHASE, 50- AND 60-HERTZ AC, SINGLE- PACKAGE, 36,000 BTU/HR |
| MIL-P-17802 Revision E:1987 | PADLOCK AND PADLOCK SETS, LOW SECURITY, KEY OPERATED, REGULAR (OPEN) SHACKLE |
| MIL A 85097/002 : 1993 | AIRCREW ESCAPE PROPULSION SYSTEMS (AEPS) CATAPULT CARTRIDGES, MK 205 MODS 0 AND 1 |
| MIL-T-3510 Revision E:1989 | TARGET, SURVEYING, BEACON [WITH CARRYING BAG] |
| GG C 00225 : A | CHEST, X-RAY FILM PROTECTIVE |
| MIL-B-52690 Revision B:1987 | BRACKET PUSHING, BOW ATTACHMENT, 12-TON PNEUMATIC HALF FLOAT |
| MIL-S-44355 Base Document:1988 | SIGN MAKING KIT, PORTABLE |
| MIL F 5508 : B | FUSE, AIRCRAFT AUTOMATIC QUANTITY MEASURING HYDRAULIC |
| MIL-H-38360 Revision B:1966 | HOSE, ASSEMBLIES, TETRAFLUOROETHYLENE, HIGH-TEMPERATURE, HIGH PRESSURE, 3000 PSI HYDRAULIC AND PNEUMATIC |
| WW-P-405 Revision B:1974 | PIPE, CORRUGATED (IRON OR STEEL, ZINC COATED) |
| MIL-B-36446 Revision A:1973 | BURS, DENTAL SURGERY |
| MIL M 37869 : LATEST | MICROSCOPE, OPTICAL, BINOCULAR |
| L-C-001676 Base Document:1970 | CUSHION, CARPET AND RUG, VIRGIN URETHANE |
| MIL-M-51282 Revision D:1986 | MASK, CHEMICAL BIOLOGICAL, FIELD, M17A1 |
| PPP-B-638 Revision B:1975 | BOX, CAPS, LINERS AND SLEEVES, FIBERBOARD, KNOCKED DOWN, FLAT, PACKING OF |
| MIL P 22629 : NOTICE 3 | PRINTED WIRING BOARDS |
| MIL S 81127 : 0 | SIMULATOR LAUNCHER AND MISSILE MARK 6 MOD 2 |
| MIL-B-36268 Base Document:1964 | BEAKER, LABORATORY (POLYPROPYLENE) |
| GGG-B-121 Revision B:1964 | BAR, SINE; PLATE SINE (AND FIXTURES) |
| MIL H 3586 : E | HOLDFAST ASSEMBLY CHAIN TYPE |
| AA-F-355 Revision B Interim Revision:1972 | FILING CABINET STEEL, LEGAL AND LETTER SIZE, INSULATED |
| MIL-T-37000 Base Document:1973 | TUBE, BLOOD COLLECTING, VACUUM, STERILE |
| O-D-210 Revision A:1976 | DESICCANT, ACTIVATED, CALCIUM SULFATE, ANHYDROUS |
| GG-D-441 Revision B:1957 | DISPENSER, STRIP, DENTAL |
| MIL-P-23242 Revision B:1982 | PLASTIC COATING COMPOUND, STRIPPABLE - ELECTROPLATING |
| MIL-C-43859 Revision A:1978 | COUPLING, EXTRACTION FORCE TRANSFER, AIRDROP |
| MIL-T-6841 Revision D:1992 | TAPE AND SHEET, ADHESIVE, RUBBER AND CORK COMPOSITION |
| MIL-B-36492 Base Document:1966 | BED, ORTHOPEDIC |
| MIL R 14293 : A | RESISTOR, FIXED, HIGH MEGOHM (HERMETICALLY SEALED) |
| MIL-I-5170 Revision C:1987 | INDICATOR, POSITION, HORIZONTAL STABILIZER |
| MIL-G-52552 Revision B:1981 | GENERATOR SET, GASOLINE ENGINE, TRAILER MOUNTED 10KW 400 HERTZ PU656/G |
| SS-C-646 Revision B:1969 | CRAYON, MARKING, LUMBER |
| DOD-B-24504 Revision B:1978 | BATTERY CELLS, STORAGE, SILVER ZINC ALKALINE TYPE (FOR DOLPHIN) (METRIC) |
| MIL-S-52098 Revision C:1992 | STIFFENER ASSEMBLY, BALK CONNECTING |
| MIL-G-52537 Revision C:1980 | GENERATOR SET, GASOLINE ENGINE, TRAILER MOUNTED 10KW 400 HERTZ PU-375B/G |
| MMM-A-250 Revision C:1975 | ADHESIVE, WATER-RESISTANT (FOR CLOSURE OF FIBERBOARD BOXES) |
| MIL-P-52539 Revision B:1984 | PIPELINE WELD SET TESTING |
| NNN C 435 : B NOTICE 1 | |
| MIL-C-37068 Base Document:1975 | CONNECTOR, ELASTIC TUBING, BRANCHED, PLASTIC, Y-SHAPED |
| MIL-G-52495 Revision B:1980 | GENERATOR SET, GASOLINE ENGINE TRAILER MOUNTED 5 KW 60 HERTZ PU618/M |
| PPP-P-1134 Revision D:1983 | PACKAGING OF COTTON AND COTTON SYNTHETIC FIBER BLEND FABRICS (EXCLUDING DUCK FABRICS) |
| GGG-B-351 Revision B:1963 | BIN, STORAGE AND DISPLAY, ROTARY |
| MIL-S-8710 Revision B:1969 | STRAINER, AIRFRAME FUEL SYSTEM, GENERAL SPECIFICATION FOR |
| MIL-E-87235 Base Document:1985 | EMERGENCY ESCAPE, AIRCRAFT (REQUEST FOR ISSUE MUST BE SENT VIA ASD/ENES, WRIGHT-PATTERSON AFB OH 45433-6503 |
| MIL-B-3493 Revision D:1985 | BUCKLES, END BAR WITH TONGUE (FOR LEATHER) |
| MIL-B-2316 Revision E:1992 | BAKERY EQUIPMENT, INCLUDING UNITS ASSEMBLIES REPAIR PARTS AND TOOLS, PREPARATION FOR DELIVERY OF |
| PPP-T-495 Revision B:1974 | TUBES, MAILING, AND FILING |
| MIL-M-7997 Revision C:1981 | MOTOR, AIRCRAFT HYDRAULIC, CONSTANT DISPLACEMENT GENERAL SPECIFICATION FOR |
| MIL-C-83873 Revision A:1993 | CLEANING COMPOUND, PRECOATING SURFACE, AIRCRAFT & AEROSPACE GROUND EQUIPMENT (AGE) |
| MIL C 2486 : C | CABLE, SPECIAL PURPOSE, ELECTRICAL WM-46/U |
| MMM-A-134 Base Document:1970 | ADHESIVE EPOXY RESIN, METAL TO METAL STRUCTURAL BONDING |
| MIL S 21903 : 0 | SD-4 MOD 1 MECHANISM |
| MIL-T-12625 Revision D:1981 | THERMOMETER, SELF-INDICATING, LIQUID IN GLASS, POCKET TYPE |
| U-C-115 Revision B:1958 | CAPSULE, GELATIN |
| MIL P 10562 : D | PROJECTOR, STEREOPLOTTER, WIDE-ANGLE, VERTICAL MULTIPLEX MAPPING EQUIPMENT [SET OF THREE PROJECTORS IN A CASE WITH ACCESSORIES] |
| MIL-T-22209 Base Document:1959 | TELESCOPE MARK 104 MOD O |
| MIL I 3166 : A NOTICE 1 | INHIBITOR, WEB AND END [PLASTIC] |
| MIL-M-55336 Base Document:1971 | MAINTENANCE ACCESSORY KIT, MK-1192( ) /ARM (UNITS OF) |
| MIL F 10538 : E NOTICE 1 | FRAMES, STEREOPLOTTER PROJECTION MULTIPLEX [SINGLE AND DOUBLE] WITH CASE |
| MIL-I-83751 Base Document:1967 | INDICATOR, SAFETY LEVEL, RF |
| MIL-S-85510 Base Document:1981 | |
| MIL-R-5001 Revision B:1992 | RUBBER CELLULAR SHEET, MOLDED AND HAND BUILT SHAPES, LATEX FOAM |
| MIL-P-14232 Revision E:1976 | PARTS, EQUIPMENT AND TOOLS FOR ARMY MATERIAL, PACKAGING OF |
| MIL-S-7852 Revision B:1968 | SEAT, AIRCREW, ADJUSTABLE SWIVEL TYPE E-1 |
| MIL-B-26793 Revision B:1958 | BLOWER, GASOLINE ENGINE DRIVEN, TYPE A-1 |
| MIL-A-6425 Revision B:1959 | ADAPTOR, PRESSURE FUEL SERVICING, AIRCRAFT, GENERAL SPECIFICATION FOR |
| GG-D-465 Revision A:1977 | DISTILLING APPARATUS, LABORATORY |
| WW P 1432 : C | PIPE, STEEL (COAL TAR ENAMEL OR CEMENT MORTAR LINING, AND COAL TAR ENAMEL COATED AND WRAPPED |
| MIL R 83322 : 0 | RUBBER, CARBOXY NITROSO, NITROGEN TETROXIDE (N204) RESISTANT |
| L-C-001804 Base Document:1972 | CUSHION RING, INFLATABLE, PLASTIC |
| L-P-00315 Revision D:1976 | PIPE AND TUBING, NONMETALLIC (PLASTIC) |
| GG-B-823 Revision C:1975 | BURS, DENTURE TRIMMING, HIGH SPEED TOOL STEEL |
| MIL-F-22839 Revision D:1988 | FURNITURE, MODULAR TYPE, STEEL, FIELD OFFICE |
| MIL I 83287 : E | INDICATOR, FAULT LOCATING GENERAL SPECIFICATION FOR |
| MIL-S-49036 Base Document:1974 | Suppressor, Electrical Transient (No S/S Document) |
| MIL-T-52991 Revision A:1992 | TABLE, SCRIBING, TRACING, DRAFTING, FLIP TOP |
| MIL V 12126 : E | VALVE, GATE, BRONZE, LEVER OPERATED, QUICK OPENING, 125 PSI AND 150 PSI |
| MIL-T-51398 Revision A:1979 | TEST SET, CHEMICAL AGENT AUTOMATIC ALARM, ABCA-M74 |
| MIL-D-52645 Revision A:1973 | DISTILLATION EQUIPMENT SET, WATER, THERMOCOMPRESSION TYPE, 150 GALLONS PER HOUR, PACKAGING OF |
| MIL-M-27274 Revision E:1993 | MASK, OXYGEN MBU-5/P |
| MIL-M-7405 Revision D:1986 | MAINTENANCE PLATFORM, AIRCRAFT, TYPE B-5A |
| MIL-C-22211 Revision A:1969 | CALIBRATOR SET, RADIO, AN/UDM-1 |
| MIL-F-85731 Base Document:1986 | FASTENER, POSITIVE LOCKING, ELECTRONIC EQUIPMENT GENERAL SPECIFICATION FOR |
| MIL-B-43716 Revision B:1985 | BAGS, PLASTIC, PROTECTIVE (GARMENT) |
| MIL T 0053055 : B | TANK, 3000 GALLON & 4600 GALLON FABRIC, COLLAPSIBLE, DRINKING WATER, SEMI-TRAILER MOUNTED |
| MIL-B-16540 Revision B:1969 | BRONZE, PHOSPHOR: CASTINGS |
| MIL C 82884 : 1993 | CARTRIDGE, IMPULSE CCU-69A/A |
| MIL-G-52858 Revision A:1975 | GENERATOR SET, DIESEL ENGINE, TRAILER MOUNTED 30 KW, 50/60 HERTZ, PU-406B/M |
| MIL-B-37067 Base Document:1974 | BLOCK, INSECT FIXATION, DOUBLE MOUNTED, 100S |
| MIL-M-85522 Revision A:1991 | MONITOR, OXYGEN CRU-91/A |
| MIL-B-12233 Revision E:1986 | BAGS, SAND, BURLAP & COTTON |
| MIL S 51200 : A | SAMPLING KIT, CBR AGENT, M34 |
| MIL-A-46864 Revision B:1991 | ADHESIVE, EPOXY, MODIFIED, FLEXIBLE, TWO COMPONENT |
| MIL-B-45993 Revision A:1989 | BEAD BREAKER, PNEUMATIC TIRE, PORTABLE AIR OR AIR OVER HYDRAULIC OPERATED |
| MIL-R-19750 Revision A:1958 | REGULATOR; VOLTAGE, 28 V, 120 DEGREE C, FOR 30 V DIRECT-CURRENT GENERATOR, GENERAL SPECIFICATION FOR |
| GG-S-00812 Revision C:1965 | SUTURES, ABSORBABLE, SURGICAL (GUT) |
| MIL-A-43759 Revision A:1981 | ADAPTERS, AIR LOCK, MUST |
| SAE MA 2241 : 2015 | COUPLING ASSEMBLY, THREADLESS, FLEXIBLE, FIXED CAVITY, SELF-BONDING, METRIC |
| DD-M-411 Revision C:1990 | |
| UU-B-790 Revision A:1968 | BUILDING PAPER, VEGETABLE FIBER, (KRAFT, WATERPROOFED, WATER REPELLENT AND FIRE RESISTANT) |
| MIL-P-10388 Revision H:1990 | PIPE FITTING, ONE OR MORE ENDS GROOVED |
| MIL-C-13522 Revision C:1966 | CRUSHER, JAW, ROCK, AIRBORNE, 15-TPH CAPACITY |
| HH-I-435 Revision B:1977 | INSULATORS, ELECTRIC, PORCELAIN AND GLASS |
| MIL-STD-1169 Revision B:1987 | PACKAGING PACKING AND MARKING FOR SHIPMENT OF INERT AMMUNITION COMPONENTS |
| MIL-T-37046 Base Document:1974 | TROUSERS, OPERATING, SURGICAL, WOMEN'S, COTTON POLYESTER, STATIC RESISTANT |
| MIL-A-83216 Revision B:1976 | AIR CONDITIONER A/E32C-39 |
| MIL S 14977 : B | SQUIB, MARK 1 MOD 0 FOR 2.75 INCH ROCKET |
| MIL-R-52224 Revision D:1992 | RETAINER ASSEMBLY SLIDING |
| FF-P-101 Revision F:1984 | PADLOCK |
| MIL-G-52927 Revision A:1985 | GENERATOR SETS, GASOLINE ENGINE, TRAILER MOUNTED 3 KW, 28 VOLT DC, PU-666/G |
| MIL-I-27304 Revision E:1977 | INDICATOR, RATE OF FLOW |
| MIL-S-4461 Revision H:1974 | SEALING MACHINES, HEAT, HOT JAW AND CONTINUOUS |
| MIL-B-29186 Base Document:1978 | BARRIER SYSTEM: FLOATING, OIL AND DEBRIS CONTAINMENT (FOR PERMANENT INSTALLATION) |
| MIL-B-3434 Revision C:1981 | BEATER, FOREST FIRE |
| MIL-L-52430 Revision C:1991 | LIGHT, SIGNAL, SURVEYING 2 INCH & 5 INCH REFLECTORS, BATTERY POWERED WITH CASES |
| DOD I 24688 : 0 | INSULATION PANEL, THERMAL AND ACOUSTIC ABSORPTIVE, OPEN-CELL POLYIMIDE FOAM |
| MIL-S-52561 Revision A:1972 | SUPPLEMENTARY EQUIPMENT SET, TOPOGRAPHIC PHOTOMAPPING, PACKAGING OF |
| MIL-S-18471 Revision G:1983 | |
| MIL-S-14022 Revision A:1983 | SODIUM PERBORATE, TETRAHYDRATE |
| MIL-V-5461 Revision C:1977 | VALVE, VACUUM BREAKING |
| MIL T 21911 : 0 | TELESCOPE MARK 115 MOD O |
| MIL-F-3222 Revision F:1991 | FLOODLIGHTS AND LANTERNS, PACKAGING OF |
| MIL-S-12514 Revision C:1974 | STARTER, MOTOR, ACROSS THE LINE AND REDUCED VOLTAGE TYPES, AC INDUCTION, 3/4 TO 100 HP MANUAL AND ELECTRIC |
| MIL A 12067 : B | ANALYZER, SPECTRUM TS-723( )/U |
| MIL-P-46111 Revision C:1978 | PLASTIC FOAM, POLYURETHANE (FOR USE IN AIRCRAFT) |
| MIL-G-52636 Revision B:1978 | GENERATOR SET, GASOLINE ENGINE, TRAILER MOUNTED 3KW 60 HERTZ PU-625/G |
| G-M-656 Revision A:1958 | MOUNTS, RADIOGRAPHIC FILM, DENTAL |
| MIL T 5882 : D | TRANSMITTER, PRESSURE, MULTIPURPOSE, 0-50 PSI, MS28005-1 |
| MIL I 7077 : B | INDICATOR, TEMPERATURE ELECTRICAL RESISTANCE, MULTIFUNCTION -70 DEG TO PLUS 150 DEG. C 2 INCH SIZE |
| MIL-D-51048 Revision F:1976 | DECONTAMINATING APPARATUS, PORTABLE, DS2, 1-1/2 QUART, M11 |
| MIL D 23607 : B | DISCONNECT SWITCHES, AIR OUTDOOR (7.2 KV TO 34.5 KV) |
| MIL-A-22336 Revision B:1979 | AMPLIFIER, SYNCHRO SERVO, 6 WATT, 6O HZ |
| MIL L 15098 : D | LAMP, GLOW |
| DD-P-00355 Revision A:1975 | PIPET, DROPPING, GLASS OR PLASTIC |
| MIL-B-37965 Base Document:1986 | BURS, BONE SURGERY (CORROSION-RESISTING STEEL) |
| MIL-S-10145 Revision D:1965 | SKETCHMASTER, VERTICAL, WITH CASE |
| MIL-M-13130 Revision C:1972 | METER, AUDIO LEVEL TS-585(/U) |
| MIL-R-37624 Base Document:1977 | RACK, TEST TUBE, LABORATORY, WINTROBE, ENAMELLED STEEL, 10 TUBE |
| MIL I 82356 : NOTICE 1 | INSTRUMENTS, SIMULATED, FOR AIRCRAFT TRAINING DEVICES; GENERAL SPECIFICATION FOR |
| MIL-P-55151 Revision B:1973 | POWER SUPPLY PP-1104 ( )/G |
| MIL C 3297 : D | CANISTER, SMOKE M3 AND M4 FOR 155-77 SHELL |
| L-P-391 Revision D:1975 | PLASTIC SHEETS, RODS AND TUBING, RIGID CAST, METHACRYLATE (MULTIAPPLICATIONS) |
| MIL C 5500 : D | CAPS, HIGH PRESSURE AIR VALVE |
| MIL-T-52296 Revision D:1983 | TRANSOM ASSEMBLY, 60 TON UNIVERSAL TRANSOM |
| SAE AMS G 25871 : 2016 | GLASS, LAMINATED, AIRCRAFT GLAZING |
| MIL-C-28688 Base Document:1990 | CABLE, FIBER OPTIC, PACKAGING OF |
| MIL-T-43512 Revision B:1970 | TENTS, MISSILE SYSTEM EQUIPMENT CONSOLE, (HIGH-POWER ILLUMINATOR HAWK) |
| MIL-A-52873 Base Document:1975 | ALARM SET, ANTI-INTRUSION (PSID) AN/GSG-151 |
| WW-T-825 Revision B:1971 | TUBE, MAGNESIUM-ALLOY, EXTRUDED |
| MIL-S-24584 Base Document:1978 | STOPPERS, CARPENTER AND ASSOCIATED BRIDLES (WIRE ROPE AND CHAIN LINK) |
| MIL-C-14500 Revision C:1985 | CRADLE, BOAT, STEEL |
| MIL R 52105 : D | RAMP, RAFT |
| MIL E 55585 : F | ELECTRONICS EQUIPMENT AND PARTS, PACKAGING OF |
| MIL-F-5509 Revision D:1978 | FITTING, FLARED TUBE, FLUID CONNECTION |
| MIL-E-36875 Revision A:1975 | ETHYNODIOL DIACETATE AND ETHINYL ESTRADIOL TABLETS, U.S.P. |
| MIL D 11318 : A | |
| MIL I 5184 : B | INDICATOR, POSITION |
| MIL D 37671 : NOTICE 2 | DIENESTROL CREAM, NF |
| MIL-D-8804 Revision B:1993 | DE-ICING SYSTEM, PNEUMATIC BOOT, AIRCRAFT, GENERAL SPECIFICATION FOR |
| MIL-C-7474 Revision E:1978 | CASTER, INDUSTRIAL |
| MIL-B-13265 Revision C:1985 | BRIDGES, FIXED, STEEL, RAILWAY, UNIT CONSTRUCTION, 70-FT., 2-GIRDER SPAN: AND CONVERSION SETS: COMPONENTS OF |
| SAE AS 7997:1999 | MOTORS, AIRCRAFT HYDRAULIC, CONSTANT DISPLACEMENT - GENERAL SPECIFICATION FOR |
| MIL-I-49466 Base Document:1990 | INSULATOR; DISKS, PLATES & WASHERS GENERAL SPECIFICATION FOR |
| MIL-M-22387 Base Document:1964 | MOTOR, ALTERNATING CURRENT |
| MIL-P-70343 Base Document:1990 | PACKING, FIBERGLASS, ROPE & WICK |
| MIL-B-52097 Revision B:1992 | BAR, CARRYING, MULTIPLE AND SINGLE M4 BALK |
| MIL T 52777 : A NOTICE 1 | TANK, STORAGE, UNDERGROUND, GLASS FIBER REINFORCED PLASTIC |
| MIL-S-20386 Revision D:1977 | STEREOMETER, PHOTOGRAMMETRIC; STEREOCOMPARAGRAPH-TYPE; WITH ACCESSORIES AND CASE |
| MIL-H-22995 Revision A:1969 | HELMET SHELL ASSEMBLIES, PILOT S PROTECTIVE, APH-6 SERIES |
| MIL-T-36349 Revision A:1978 | THERMOMETER,SELF-INDICATING, BIMETALLIC DIAL 8 1/2 INCH |
| FF C 00431 : B | CLIP, PAPER (BINDER) |
| MIL-PRF-2697 Revision A:1960 | GLASS, PORTLIGHT, CIRCULAR, HEAT TREATED |
| MIL-P-29206 Revision A:1987 | PIPE AND PIPE FITTINGS, GLASS FIBER REINFORCED PLASTIC, FOR LIQUID PETROLEUM LINES |
| MIL-C-55169 Base Document:1962 | CONNECTORS, ELECTRIC, TYPE "Q", MULTI-CONTACT |
| MIL L 49157 : A | LENS ASSEMBLY, OBJECTIVE FOR NIGHT VISION GOGGLES, AN/PVS-5A |
| MIL-A-49382 Base Document:1980 | AFOCAL ASSEMBLY, AN/VSG-2 |
| MIL-I-25863 Revision D:1990 | INDICATOR, ELECTRICAL TACHOMETER 0-110 PERCENT RPM, 2-INCH SIZE, INTEGRALLY LIGHTED |
| MIL-V-8712 Revision A:1965 | VALVE, AIR RELIEF, LOW PRESSURE |
| MIL-L-52696 Base Document:1970 | LAMINATING RESIN |
| NNN-B-585 Revision B:1979 | BOX MICROSCOPE SLIDE PLASTIC |
| MIL-H-49225 Base Document:1980 | HEADSET MICROPHONE KIT MK-896A/AIC (COMPONENTS OF) |
| MIL-C-55172 Revision B:1972 | CABINET, ELECTRICAL EQUIPMENT, CY-3397 ( ) /G |
| MIL-C-37099 Base Document:1975 | CENTRIFUGE, LABORATORY, HAND FELD |
| NNN G 698 : C | GRID WIRE GAUZE LABORATORY |
| KKK-C-650 Revision E:1985 | CREEPER, MECHANIC'S |
| NNN R 560 : A | ROD STIRRING LABORATORY |
| FF-P-416 Revision E:1963 | PIN, SAFETY |
| MIL-B-43254 Revision B:1970 | BRUSH, ANIMAL GROOMING |
| MIL W 28839 : 0 | WAVEGUIDE, ELLIPTICAL GENERAL SPECIFICATION FOR |
| MIL R 37208 : 0 | RACK, TEST TUBE LABORATORY |
| MIL P 21922 : B | PLASTIC RODS AND TUBES, POLYETHYLENE |
| GGG-T-0030 Base Document:1965 | TACKER, STAPLE (COMPRESSION TYPE, MANUALLY OPERATED FOR ROUND CROWNED STAPLES) AND STAPLE, TACKER (ROUND CROWNED) |
| MIL-B-44381 Base Document:1990 | BOARD, MAP, COMPLEXING (SICPS) |
| MIL-I-7063 Revision B:1979 | INDICATOR, POSITION, RUBBER TRIM TAB |
| MIL H 7750 : B | HOUSING, PARACHUTE RIPCORD |
| MIL-T-43618 Revision B:1983 | TAPE, PRESSURE SENSITIVE FOR MENDING NYLON PARACHUTE CANOPIES |
| JJ-S-750 Revision A:1967 | STRAP, WEBBING |
| MIL-B-23071:C | Blowers, Miniature, for Cooling Electronic Equipment General Specification for<br> |
| FF-B-195 Base Document:1960 | BEARING, SLEEVE, (BRONZE, PLAIN OR FLANGED) |
| RR-P-1352 Revision C:1989 | PARTITION, TOILET, COMPLETE |
| MIL-R-51198 Base Document:1964 | REPAIR KIT, CBR AGENT SAMPLING & ANALYZING KIT, M32 64 |
| GG-R-1638 Revision A:1985 | REMOVAL, DENTAL CROWN (SIMPLEX) |
| MIL-B-37409 Base Document:1976 | BOX, INSECT, SPECIMEN |
| MIL-I-19166 Revision C:1963 | INSULATION TAPE, ELECTRICAL, HIGH-TEMPERATURE GLASS FIBER, PRESSURE-SENSITIVE |
| MIL-W-52663 Revision A:1075 | WATER PRETREATMENT DECONTAMINATION SET, CB AGENTS, PACKAGING OF |
| GG-R-1549 Revision A:1986 | |
| MIL L 3976 : D | LIGHTS, MARKER, CLEARANCE (SERVICE & BLACKOUT) |
| AA-S-75 Revision A:1975 | SAFE, DENTAL X-RAY FILM PROTECTIVE |
| MIL-P-53069 Base Document:1987 | POWER PLANT, DIESEL ENGINE, TRAILER MOUNTED 200 KW, 60 HERTZ AN/MJQ-11A |
| MIL R 28750 : C SUPP 1 | RELAYS, SOLID STATE, SEALED, OPTICALLY ISOLATED, ZERO VOLTAGE TURN ON, 25 AMPERES, 250 VOLTS MAXIMUM, 45-440 HZ, POWER SWITCHING |
| MIL-C-43153 Base Document:1963 | CLOTH, CARTRIDGE, POLYESTER & VISCOSE RAYON (FOR CARTRIDGE BAGS) |
| MIL-M-4871 Revision C:1984 | MAINTENANCE PLATFORM |
| AA-F-2815 Base Document:1992 | FILING CABINET, UNINSULATED, SECURITY (SECRET AND CONFIDENTIAL STORAGE) |
| DOD P 63975 : 0 | PRIMER, ELECTRIC, PA520 |
| CCC-W-51 Revision D:1975 | WADDING, COTTON, SURGICAL |
| MIL-H-7365 Revision D:1986 | HOSE, AIR DUCT, FOR GROUND HEATERS |
| MIL-C-20634 Revision D:1985 | CASE DRAWING BOARD AND PLANETABLE BOARD, 15-BY 20-INCH |
| MIL-C-426 Revision B:1968 | CARRIER, TIMBER, HANDLED |
| MIL-I-52172 Revision C:1983 | INSULATION BATT, NYLON THERMAL |
| MIL-S-37849 Base Document:1977 | SODIUM FLUORIDE SOLUTION USP |
| MIL-A-38202 Revision C:1972 | AIRCRAFT ARRESTING SYSTEM BAK-12A/E32A; PORTABLE, ROTARY FRICTION |
| MIL-S-22824 Revision E:1993 | SLINGS, MULTIPLE LEG, VEHICLE (SHIPBOARD LOADING) |
| UU B 001254 : NOTICE 1 | BINDER, LOOSE-LEAF, RING. ONE-PIECE COVER |
| MIL C 0052876 : C | CABINETS, MONITOR, CY 7359/FSS 9(V) AND CY 7361/FSS 9(V) |
| MIL-B-17397 Revision D:1983 | BITTS, CLEATS, AND CHOCKS |
| MIL-S-81591 Base Document:1968 | Steel, Investment Castings, Carbon and Corrosion Resisting |
| MIL-B-233 Revision D:1987 | BOXES, SUPPLY SUPPORT ITEMS, STOWAGE AND STORAGE |
| MIL S 25073 : 0 | |
| MIL-P-2911 Revision A:1957 | PACKING, ASSEMBLY, HYDRAULIC CONICAL AND V TYPES |
| MIL-C-36351 Revision B:1971 | CETYLPYRIDINIUM CHLORIDE SOLUTION ALCOHOLIC 0-05 PERCENT |
| MIL M 21602 : 0 | MOTOR, PROPULSION, DIRECT CURRENT |
| MIL-T-55603 Revision A:1975 | TEST SET, TELEPHONE AN/SPTM-7 |
| MIL-G-52902 Revision A:1982 | GENERATOR SET, DIESEL ENGINE, TRAILER MOUNTED 5 KW, 60 HERTZ, PU-751/M |
| GG-S-928 Revision B:1950 | |
| O-C-828 Revision C:1980 | CUPRIC SULFATE, PENTAHYDRATE, TECHNICAL |
| SAE AS 22805 : 1999 | SPRAY KIT, SELF PRESSURIZED |
| MIL-P-7204 Revision B:1970 | POWER SUPPLY, 28 VOLT TYPE B 9 |
| O-D-1271 Revision B:1985 | DIETHYLENETRIAMINE, TECHNICAL |
| MIL-R-5520 Revision C:1964 | RESERVOIRS, AIRCRAFT, HYDRAULIC, NON-SEPARATED TYPE |
| MIL-B-23306 Revision B:1985 | BINOCULAR, SHIP, 20-POWER AND ACCESSORIES |
| MIL-STD-162 Revision E:1980 | MATERIALS HANDLING EQUIPMENT PREPARATION FOR SHIPMENT, STORAGE, CYCLIC MAINTENANCE ROUTINE TESTING AND PROCESS |
| MIL S 55041 : C | SWITCH, WAVEGUIDE GENERAL SPECIFICATION FOR |
| MIL-P-53088 Base Document:1989 | POWER PLANT, ELECTRIC, DIESEL ENGINE DRIVEN, TRAILER MOUNTED, 3KW, 60 HERTZ |
| MIL-A-12374 Revision D:1982 | ANEMOMETER ML-433 PM AND CASE, ANEMOMETER CY-1397 PM |
| MIL-T-55659 Base Document:1971 | TEST FACILITIES KIT, MK-994()/AR (UNITS OF) |
| MIL C 36807 : NOTICE 1 | |
| TT E 00488 : B | ENAMEL, PRIMER COATING AND CLEAR LACQUER (IN PRESSURIZED DISPENSERS) |
| MIL-R-1296 Revision F:1993 | RIFLE, CALIBER .22 LR COMMERCIAL, FOR MATCH AND TRAINING |
| MIL J 83010 : B NOTICE 1 | JACK, AIRCRAFT LANDING GEAR MMU-87/E, 35-TON CAPACITY |
| MIL-N-23182 Revision A:1967 | NETWORKS, PULSE FORMING, RADAR, GENERAL SPECIFICATION FOR |
| MIL-C-50446 Revision A:1981 | CASE, CARTRIDGE, 40MM, M118 PARTS FOR |
| MIL-G-10944 Revision B:1965 | GAGE, DIMENSIONAL CONTROL |
| MIL B 43021 : E | BINDER, LOAD, CARGO TIE-DOWN, 10,000 POUND CAPACITY |
| NNN-S-750 Base Document:1962 | STAND LABORATORY APPARATUS SUPPORT |
| MIL-A-81851 Revision B:1986 | ALTIMETER AAU-31/A |
| MIL-T-45277 Base Document:1973 | TRANSMITTER, INDUCTION COMPASS T-611 (/ASN) |
| MIL-C-19062 Revision C:1977 | CONTROL CABLE ASSEMBLIES AND CONNECTOR PLUGS AND RECEPTACLES (FOR TORPEDOES) |
| GG S 00928 : C | SYRINGE, METAL, EAR |
| MIL-S-52547 Revision A:1974 | SUPPLEMENTARY EQUIPMENT, MAINTENANCE COMPANY, PACKAGING OF |
| MIL C 17-112 : A | CABLE, RADIO FREQUENCY FLEXIBLE COAXIAL 50 OHMS H17/112 RG304 |
| MIL-S-44221 Revision A:1989 | STAND, CANTEEN CUP |
| QQ-Z-301 Revision C:1964 | ZINC SHEET AND STRIP |
| GG C 00289 : NOTICE 1 | CHISELS, DENTURE-TRIMMING |
| MIL-A-4864 Revision A:1960 | ALUMINUM WOOL |
| MIL-C-43011 Revision A:1978 | CARRYING CASE, TEST SET, SOIL TRAFFICABILITY |
| MIL-B-11582 Revision C:1978 | BASE PLATE, THEODOLITE: ALUMINUM |
| MIL-D-537 Revision F:1992 | DISKS, COLOUR STANDARDS |
| MIL-B-12841 Revision B:1970 | BASIC ISSUE ITEMS FOR MILITARY VEHICLES, CARRIAGES AND EQUIPMENT; PREPARATION FOR SHIPMENT AND STORAGE |
| MIL-B-10122 Revision E:1991 | BARGE, LIQUID CARGO: NONPROPELLED, STEEL, OFFSHORE, 4,160-BARREL, 120-FOOT, DESIGN 231C |
| GG-M-105 Revision D:1977 | MALLET, ORAL SURGERY |
| PPP-T-1150 Revision B:1978 | TOOLS AND TOOL ACCESSORIES FOR POWER DRIVEN, METAL AND WOODWORKING MACHINERY, PACKAGING AND PACKING OF |
| MIL-B-36777 Revision A:1971 | BLOWTORCH, ALCOHOL |
| GG-B-2043 Base Document:1977 | BRUSH, SURGICAL SCRUB |
| MIL-P-27965 Base Document:1967 | PLOTTING SET, THEODOLITE ML-625/GM |
| MIL-S-13943 Revision B:1983 | SODIUM SULFATE, ANHYDROUS, TECHNICAL |
| GGG-T-00559 Base Document:1964 | TOOL KIT, LEATHERCRAFT |
| MIL R 196 : C | REPAIR PARTS, ACCESSORIES, AND KITS, MECHANICAL, PACKAGING OF |
| MIL C 572 : G | CORD, YARNS AND MONOFILAMENT ORGANIC SYNTHETIC FIBER |
| MIL-C-496 Revision D:1992 | CLIP, END, STRAP |
| MIL F 11543 : B | FLUXMETER TS-15()/AP |
| MIL-S-58112 Base Document:1989 | SLING, MULTI LEG, HELICOPTER, EXTERNAL CARGO |
| MIL-B-21418 Base Document:1958 | BELTING SYSTEM, AMMUNITION, MARK 2 MOD O (FOR 2O MM MARK 1OO SERIES AMMUNITION) |
| MIL A 3962 : E | ANCHORS, GROUND, ARROWHEAD WITH DRIVING EQUIPMENT |
| MIL-A-52401 Revision B:1974 | ADAPTER, ARCTIC, DRIVE-TYPE PICKET |
| MIL-C-11782 Revision C:1967 | CAMOUFLAGE NET DRAPE SETS, PACKAGING OF |
| MIL-P-21325 Revision A:0196 | POWER SUPPLY FOR TEST SET MARK 281 MOD O |
| MIL-H-14040 Base Document:1965 | HEADPIECE, COLLECTIVE PROTECTOR, HOSPITAL, M13 |
| MIL C 62327 : A NOTICE 1 | CARRIER, ARMORED, FULL TRACKED, M901 TOW VEHICLE (LESS TOW WEAPON) AND M981 FISTV, PROCESSING FOR STORAGE AND SHIPMENT OF |
| MIL-P-36637 Revision B:1976 | PIPETTING MACHINE, SEMI AUTOMATIC |
| MIL-I-5417 Revision D:1968 | INDICATOR, INDICATED AIRSPEED 40-400 KNOTS |
| MIL-I-5721 Revision C:1970 | INDICATOR, INDICATED AIRSPEED 20-250 KNOTS |
| MIL-S-52697 Revision A:1975 | SURVEYING CONTROL SECTION TRUCK MOUNTED PACKAGING OF |
| MIL-R-83283 Revision A:1991 | RUBBER, SILICONE, HIGH STRENGTH, CABIN PRESSURE SEAL MATERIAL, DIAPHRAGM TYPE |
| MIL-C-3580 Revision E:1991 | CRANES AND CRANE SHOVELS, TRUCK, CRAWLER, AND WHEEL MOUNTED FULL REVOLVING AND THEIR ATTACHMENTS, PACKAGING OF |
| O-S-576 Revision F:1967 | SODIUM BICARBONATE, TECHNICAL |
| MIL-L-2045 Revision B:1966 | LOOP, STRAP FASTENER [FOR NONEQUIPAGE ITEMS] |
| MIL-I-50711 Base Document:1970 | IRON BASE SINTERED METAL BARS (OIL PREGNATED) |
| MIL T 49053 : 0 | TEST SET, RELAY TS-1775()/U |
| MIL-L-36296 Base Document:1964 | LABEL TAPE, PRESSURE SENSITIVE ADHESIVE KEEP OUT OF REACH OF CHILDREN, LEGEND |
| SAE AMS R 5001 :1998(S2015) | RUBBER CELLULAR SHEET, MOLDED AND HAND-BUILT SHAPES; LATEX FOAM |
| MIL-M-18294 Revision D:1987 | METER, FLUID QUANTITY VOLUMETRIC |
| MIL-P-52200 Revision C:1992 | PONTOON BOAT, HALF SECTION, ALUMINUM HULL, SPOON BOW |
| SAE AMS G 25667 : 2016 | GLASS, MONOLITHIC, AIRCRAFT GLAZING |
| SAE AMSA8576A:1997(S2016) | ADHESIVE, ACRYLIC BASE, FOR ACRYLIC PLASTIC |
| ASTM F 957 : 1991 : R2001 | Standard Specification for Gong, Sound Signaling |
| ASTM F 957 : 1991 : R2012 | Standard Specification for Gong, Sound Signaling |
| SAE AS 85376 : 2007 | STAND, SHIPBOARD, HELICOPTER MAINTENANCE |
| ASTM PS 106 : 2001 | Provisional Standard Specification for Rods and Tubes of Polyethylene (PE) |
| ASTM F 1312 : 1990 : R2013 | Standard Specification for Brick, Insulating, High Temperature, Fire Clay |
| MIL-G-12803 Revision C:1989 | GASKET MATERIAL, NON-METALLIC |
| MIL-L-38200 Revision B:1966 | LIFE PRESERVER, UNDERARM, ADULT LPU 5/P |
| SAE AMS I 538 : 2016 | INSULATION, ELECTRICAL, PASTED-MICA |
| SAE AMS R 83285 : 2011 | RUBBER, ETHYLENE-PROPYLENE, GENERAL PURPOSE |
| MIL C 22627 : 0 | COATING, CONFORMAL, RESIN |
| MIL-B-28514 Revision A:1983 | BOOTH, SPRAYING, PAINT (WITH EXHAUST SYSTEM) |
| GGG-L-795 Revision E:1990 | LUBRICATING UNIT, POWER OPERATED, AND PUMPING UNITS, PRESSURE LUBRICATING, DRUM MOUNTING |
| MIL-L-23398 Revision D:1985 | LUBRICANT, SOLID FILM, AIR DRYING, CORROSION INHIBITING, NATO CODE NUMBER S 749 |
| MIL-C-13720 Revision B:1983 | CLAMP, BEAM, CARGO LASHING |
| MIL-HDBK-772 Base Document:1981 | MILITARY PACKAGING ENGINEERING |
| MIL-P-52650 Revision A:1975 | PLOTTING INSTRUMENT SET, STEREOPLOTTER, MULTIPLEX LABORATORY, PACKAGING OF |
| MIL-R-7575 Revision C:1966 | Resin, Polyester, Low-Pressure Laminating |
| L E 530 : A | ENVELOPE, TRANSPARENT |
| PPP-P-001944 Base Document:1976 | PACKAGING AND PACKING OF LATERAL FILING CABINETS, STEEL, GENERAL OFFICE |
| MIL-C-3600 Revision E:1991 | COMPRESSOR, AIR AND GAS [EXCEPT OXYGEN] PACKAGING OF |
| PPP-B-566 Revision E:1974 | BOX, FOLDING, PAPERBOARD |
| MIL-C-10578 Revision D:1982 | CORROSION REMOVING AND METAL CONDITIONING COMPOUND (PHOSPHORIC ACID BASE) |
| ASTM F 1312 : 1990 : R1997 | Standard Specification for Brick, Insulating, High Temperature Fire Clay |
| MIL-S-51173 Revision A:1964 | SERVICE UNIT, FLAME THROWER, TRUCK MOUNTED, M4A2 |
| MIL-S-52729 Base Document:1972 | SURVEYING SET, ASTRONOMIC POSITION, PACKAGING OF |
| MIL R 83397 : A | RUBBER, POLYURETHANE, CASTABLE, HUMIDITY RESISTANT |
| MIL-H-37082 Base Document:1974 | HYDROMETER, GRADUATED SCALE, Specific Gravity Range 1.196 to 1.286 |
| MIL I 25689 : A NOTICE 1 | INDICATOR, ELECTRICAL TACHOMETER |
| MIL-R-2327 Revision F:1972 | RING, CONNECTING, ROUND |
| MIL H 26633 : C | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, OXYGEN |
| MIL-P-50060 Base Document:1959 | PAPER, CONGO RED. |
| MIL-F-21241 Base Document:1958 | FILTER, COLOR, FINISHED (FOR OPTICAL INSTRUMENTS) |
| MIL-C-1410 Revision F:1985 | CHAIN, HOOK AND RING ASSEMBLY, TENT |
| MIL I 25725 : A | INDICATOR, TORQUE PRESSURE, MAGNESYN STYLE, SINGLE CLAMP MOUNTED, 2 IN SIZE, 50-400 PSI TYPE A-8 |
| MIL-B-37036 Revision A:1985 | BUR, DENTAL, FINISHING (TUNGSTEN CARBIDE) |
| MIL-I-51175 Base Document:1964 | INSTALLATION KIT, GAS-PARTICULATE FILTER UNIT, ARMORED VEHICLE, AMBULANCE M37 |
| MIL-T-37318 Base Document:1976 | TEST TUBE, 16 BY 135 MM SCREW CAP DISPOSABLE |
| MIL-I-18804 Revision B:1964 | INDICATOR, VERTICAL SPEED, 0 - 6000 FPM, 2 INCH |
| MIL-C-51355 Revision A:1979 | CARTRIDGE, 40 MM, CS, M651 |
| TT-I-554 Revision A:1956 | INK, STAMP-PAD, RED, FOR PHOTOGRAPHIC PRINTS |
| MIL-B-543 Revision G:1990 | BUCKLE, TONGUELESS AND WEB STRAP |
| MIL-P-24333 Base Document:1968 | PLASTIC MATERIAL, UNICELLULAR, SHEET, ELASTOMERIC |
| MIL-T-12242 Revision A:1963 | TEST SET, TELEPHONE TS-716( )/U |
| PPP-B-1980 Base Document:1977 | BOARDS, BULLETIN AND CONTROL, PACKAGING AND PACKING OF |
| MIL T 55095 : 0 | TEST SET, SERVO MODULATOR |
| L-P-512 Revision C:1977 | PLASTIC SHEET (SHEETING); POLYETHYLENE |
| MIL-L-2638 Revision D:1975 | LACQUER, VINYL RESIN, GASOLINE AND WATER RESISTANT |
| MIL-P-3756 Revision D:1980 | PROTRACTOR, ONE ARM SEMICIRCULAR [CORROSION RESISTANT ALLOY WITH CAE] |
| MIL-G-21032 Revision D:1972 | GASKET, METALLIC ASBESTOS, SPIRAL WOUND (FORASA COMMERCIAL) SHOW 115 5 |
| MIL-P-7206 Revision B:1970 | POWER SUPPLY, SILICON RECTIFIER TYPE B 8 |
| HH P 1784 : NOTICE 1 | PAPER, ASBESTOS |
| MIL-M-6404 Revision A:1965 | METER, VOLUMETRIC, POSITIVE DISPLACEMENT LIQUID, TYPE F 1 AIRCRAFT FUEL 300 GALLONS PER MINUTE |
| MIL-B-36630 Base Document:1970 | BOX, MICROSCOPE SLIDE, PLASTIC, 5 SLIDE |
| MIL-A-36080 Revision C:1965 | ANESTHESIA SET, ENDOTRACHEAL |
| MIL-I-37668 Base Document:1977 | IOPANOIC ACID TABLETS, USP |
| NNN-T-360 Revision B:1976 | TISSUE GRINDER TENBROECK |
| MIL-M-51113 Revision D:1986 | MASK, CHEMICAL BIOLOGICAL, AIRCRAFT, ABC-M24 |
| GG-P-125 Revision B:1973 | PEN, RULING, DRAFTMANS: CONTOUR SWIVEL ACTION |
| MIL-B-3630 Revision D:1983 | BATCHING PLANT, AGGREGATE MOBILE, THREE-COMPARTMENT, 60-TON CAPACITY |
| MIL I 38135 : B (3) | INDICATOR, INDICATED AIRSPEED AVU 19/A STANDBY |
| MIL-A-49180 Base Document:1978 | ALARM DETECTOR ID-1974 ()/PPS-5 |
| GG-S-328 Revision B:1958 | SHIELDS, EYE SURGERY |
| MIL-M-19261 Base Document:1956 | METER, POWER FACTOR 4-1/2 INCH, SWITCHBOARD TYPE |
| MIL-D-52665 Base Document:1969 | DRAFTING EQUIPMENT SET, TOPOGRAPHIC BATTALION, PHOTOMAPPING COMPANY, PACKAGING OF |
| MIL-N-634 Revision C:1977 | NAVIGATOR, PLOTTING INSTRUMENT SET AND PLOTTING INSTRUMENTS |
| GG-B-00596 Revision B:1970 | BOUGIE, EUSTACHIAN, SET OF FIVE |
| MIL-S-36230 Base Document:1964 | SLEEVE, PLASTIC, HISTOPATHOLOGICAL SPECIMEN |
| MIL-P-6063 Revision B:1978 | PACKAGING OF BATTERIES, STORAGE, CHARGED AND DRY UNCHARGED AND MOIST, GENERAL SPECIFICATION FOR |
| MIL-H-36364 Revision B:1990 | HOLDER, RADIAC DETECTING ELEMENT, FILM BADGE TYPE |
| GG-N-00195 Revision B:1972 | NEEDLE, HYPODERMIC, BLOOD COLLECTING, DOUBLE-POINTED, DISPOSABLE |
| NNN T 792 : A NOTICE 1 | TUBE DRYING LABORATORY |
| L-P-1036 Revision A:1974 | PLASTIC ROD, SOLID: PLASTIC TUBES AND TUBING, HEAVY WALLED: POLYVINYL CHLORIDE, RIGID |
| MIL-C-3993 Revision C:1962 | COPPER AND COPPER-BASE ALLOY MILL PRODUCTS; PACKAGING OF |
| MIL-I-46838 Revision B:1981 | INSULATING COMPOUND, ELECTRICAL, SILICONE RUBBER, ROOM TEMPERATURE VULCANIZING |
| MIL T 4 : L | TIRES & INNER TUBES (NON-AIRCRAFT) - PACKAGING OF |
| MIL-A-25081 Base Document:1955 | AMPLIFIER, ELECTRONIC CONTROL, 2 CHANNEL, APPROACH AND NAVIGATIONAL, TYPE MB-4 |
| MIL C 83867 : B | CONNECTOR, OXYGEN MASK HOSE NON-EJECTION TYPE |
| MIL-T-5684 Revision B:1981 | TIE RODS; ROUND AND SQUARE, AIRCRAFT |
| DOD-C-24594 Base Document:1979 | CELL, STORAGE, SILVER-ZINC ALKALINE TYPE (FOR DEEP SUBMERGENCE APPLICATIONS) (METRIC) |
| MIL B 003473 : A | BEAD, LABORATORY, GLASS |
| MIL-P-46112 Revision B:1977 | PLASTIC SHEET & STRIP, POLYMIDE |
| MIL-W-3318 Revision A:1971 | Wire, Copper, and Wire, Steel, Copperclad W-154 and WS-24/U (No S/S Document) |
| NNN-T-580 Base Document:1963 | TONG LABORATORY |
| MIL-M-5793 Revision A:1954 | MICROPHONE M-3A/A |
| QQ-N-288 Base Document:1956 | NICKEL-COPPER ALLOY AND NICKEL-COPPER-SILICON ALLOY CASTINGS |
| GG-B-00686 Revision D:1973 | BROACHES, PULP CANAL, BARBED, DENTAL |
| MIL T 49081 : NOTICE 2 | TELEPHONE CIRCUIT, LINE RELAY TA-452(24/GTA-14 |
| MIL S 9479 : C | |
| MIL L 61002 : 0 | LABELS, PRESSURE-SENSITIVE ADHESIVE, FOR BAR CODES AND OTHER MARKINGS |
| L-P-393 Revision A:1964 | PLASTIC MOLDING MATERIAL,POLYCARBONATE, INJECTION AND EXTRUSION |
| MIL P 36722 : C | PIPET, VOLUMETRIC, MICRO |
| MIL-I-7444 Revision D:1984 | INSULATION SLEEVING, ELECTRICAL FLEXIBLE |
| L T 0030 : NOTICE 1 | TAB, SIGNAL, PLASTIC, TAB SET, SIGNAL, PLASTIC |
| MIL-R-37198 Base Document:1975 | READER, MICROHEMATOCRIT, SPIRAL TYPE |
| MIL-G-14106 Revision B:1979 | GENERATOR, DIRECT CURRENT, G-43 ()/G (HAND CRANKED) |
| MIL T 6349 : C NOTICE 1 | TEST SET, SYNCHRO |
| MIL W 43334 : B | WEBBING AND TAPE, TEXTILE, PACKAGING AND PACKING OF |
| MIL-B-16305 Revision B:1964 | BRICK, REFRACTORY, INSULATING |
| MMM-A-187 Revision B:1968 | ADHESIVE EPOXY RESIN BASE LOW AND INTERMEDIATE STRENGTH GENERAL PURPOSE |
| MIL-I-26689 Revision C:1981 | INDICATOR, HORIZONTAL SITUATION, AQU-2/A |
| MIL-T-10086 Revision H:1980 | TANK, LIQUID STORAGE, METAL, VERTICAL, BOLTED |
| GGG-S-283 Revision A:1967 | SHEARS, METAL CUTTING, PNEUMATIC (PORTABLE) |
| MIL-I-58067 Revision A:1977 | INDICATOR, VERTICAL VELOCITY, RAPID RESPONSE ACCELERATION SENSITIVE, GENERAL SPECIFICATION FOR |
| MIL-C-52669 Base Document:1969 | COPY AND SUPPLY SECTION, TOPOGRAPHIC MAPPING SET, TRUCK MOUNTED, PACKAGING OF |
| MIL-C-1453 Revision G:1990 | CHAIN, DOG, WITH SNAPHOOK |
| MIL-H-36973 Base Document:1973 | HOLDER, LABORATORY NEEDLE, INNOCULATING KOLLE, 10 INCH |
| MIL C 12520 : C | CONNECTOR, PLUG AND RECEPTACLE (ELECTRICAL, WATERPROOF), AND ACCESSORIES: GENERAL SPECIFICATION FOR |
| NNN-B-300 Revision A:1977 | BLOOD COLLECTING CULTURE UNIT LABORATORY |
| MIL-B-36633 Base Document:1970 | BONE SURGERY SET, EXTENSION AND TRACTION, PIN TYPE, STEINMANN |
| MIL-T-13020 Revision C:1971 | TAPE, RUBBER UNVULCANIZED, SPLICING AND MOLDING (TAPES TO-317/U & TL-318/U). |
| MIL-G-52903 Revision A:1985 | GENERATOR SET, DIESEL ENGINE, TRAILER MOUNTED 10 KW, 60 HERTZ, PU-753/M |
| DOD-B-53061 Base Document:1985 | BELTS, V: POLYURETHANE |
| MIL A 22641 : D | ADAPTOR, COAXIAL TO WAVEGUIDE, GENERAL SPECIFICATION FOR |
| MIL-R-28894 Base Document:1986 | RELAY, HYBRID OR SOLID STATE, SENSORS, ESTABLISHED RELIABILITY GENERAL SPECIFICATION FOR |
| GG-F-00340 Revision A:1966 | FILIFORMS; URETHRAL, WOVEN (BRAIDED) |
| MIL F 15733 : G | FILTERS & CAPACITORS, RADIO FREQUENCY INTERFERENCE |
| MIL-B-2029 Revision F:1983 | BURNER ASSEMBLY, SPACE HEATER |
| MIL-M-27386 Revision D:1979 | MANIFOLD ASSEMBLIES, HOSELINE, FUELING, 4-INCH QUICK COUPLING TYPE |
| MIL C 8783 : A | CLAMP, HOSE, FLAT BAND 500 DEG. F |
| MIL-T-12756 Revision A:1959 | TEST SET, BATTERY TESTER TS-183()/U |
| MIL-M-81999 Revision A:1977 | Molding Compound, Reversion Resistant, Non-Carcinogen Curing Polyurethane, Aircraft Structure |
| MIL C 1213 : E | CUPS, GREASE |
| MIL-P-44412 Base Document:1990 | PACK, PARACHUTISTS, STINGER MISSILE |
| NNN-G-692 Revision C:1970 | GRADUATE LIQUID LABORATORY AND PHARMACEUTICAL GLASS |
| MIL-A-36051 Revision A:1973 | |
| GG-C-00620 Revision F:1976 | COUNTER, RECIPROCATING, HAND HELD |
| DD-G-511 Revision E:1983 | GLASS, TUBING, ROUND |
| MIL-W-52874 Revision B:1983 | WATER QUALITY ANALYSIS SET, ENGINEER |
| MIL-S-51141 Revision A:1967 | SUIT, PROTECTIVE, IMPERMEABLE, SUPPLIED AIR, M4 |
| MIL-A-36163 Base Document:1963 | AIRWAY, PHARYNGEAL, RUBBER |
| MIL-S-2609 Revision D:1968 | SIGN BOX, INTERIOR ILLUMINATED, ELECTRIC [4 INCH BY 15 INCH MESSAGE] |
| MIL-M-52793 Base Document:1974 | MULTIMETER, BATTERY TESTING, 0 TO 35 AMP, 0 TO 10 VOLT |
| MIL-C-47150 Base Document:1974 | COMPOUND, COATING, PORCELAIN FOR POTTING ELECTRONIC COMPONENTS |
| GG-C-1969 Revision A:1976 | CURETTE, MASTOID, SPRATT |
| MIL-C-36858 Revision A:1978 | |
| MIL-A-3327 Revision A:1993 | ARCH SUPPORT |
| MIL P 19468 : A | PLASTIC RODS, POLYTETRAFLUOROETHYLENE, MOLDED & EXTRUDED |
| MIL-B-13501 Revision D:1991 | BEARINGS AND BUSHINGS, BRASS AND BRONZE, MACHINED OR FORMED |
| MIL-S-11578 Revision D:1978 | SHAKING MACHINE, TESTING SIEVE, LABORATORY, PORTABLE, HAND OPERATED, CAPACITY 6 FULL HEIGHT OR 13 HALF HEIGHT 8 INCH STANDARD SIEVES |
| JJ-B-00178 Revision C:1957 | BELTS, ROUND, DENTAL ENGINE |
| MIL-S-37073 Base Document:1974 | STAND, DISTILLING APPARATUS, LABORATORY |
| GGG-P-453 Revision A:1965 | PLATE, SURFACE, CAST IRON |
| DDD-P-52 Base Document:1959 | PAD, CLOTH, COPPER SULFATE IMPREGNATED |
| MIL S 18737 : 0 | SIGNAL LIGHT, PISTOL CARTRIDGE, MK 2 (WHITE) MK 2 (GREEN, & MK 2 (RED) |
| MIL-P-82530 Base Document:1968 | PRIMER, ELECTRIC MARK 137 MOD 0 |
| MIL-R-12499 Revision C:1967 | REPAIR EQUIPMENT, PNEUMATIC TARGET, PACKAGING OF |
| MIL G 0012327 : H | GRENADE, HAND, SMOKE H |
| GG-S-1340 Revision A:1975 | STERILIZER, SURGICAL INSTRUMENT AND SUPPLY GRAVITY AIR REMOVAL, NONPORTABLE (HEAT AND MOISTURE STABLE) |
| MIL-C-43157 Base Document:1963 | CLOTH, SPUN VISCOSE RAYON RESIN IMPREGNATED |
| MIL-D-85866 Base Document:1990 | DELAY COMPOSITION, Z-1 |
| MIL T 55069 : C NOTICE 1 | TRAINING AID, MODEL BRIDGE, FLOATING ALUMINUM, HIGHWAY TYPE, DECK BALK SUPERSTRUCTURE ON PNEUMATIC FLOATS |
| MIL A 18924 : 0 | ARMING CELLS MK 1 MODS 5, 6, 7, AND 8. |
| MIL H 24653 : 0 | HASP, HIGH SECURITY, SHROUDED FOR SHIPBOARD DOORS AND HATCHES USING HIGH AND MEDIUM SECURITY PADLOCK |
| MIL-L-12197 Revision F:1993 | LADDER, FIRE, EXTENSION, LADDERS, FIRE, SINGLE, AND LADDERS, FIRE, A-FOLDING EXTENSION |
| MIL-S-6551 Revision A:1981 | |
| PPP-P-40 Revision C:1998 | PRESERVATION AND PACKING OF HAND TOOLS; TOOLS AND TOOL ACCESSORIES FOR POWER DRIVEN, METAL AND WOODWORKING MACHINERY |
| MIL M 81380 : C | MONITOR, CONTAMINATION, FUEL DISPENSING SYSTEM |
| GG-H-166 Revision B:1958 | |
| TT C 00598 : C | CALKING COMPOUND, OIL AND RESIN BASE TYPE (FOR BUILDING CONSTRUCTION) |
| MIL-P-50039 Base Document:1959 | PAPER, NITRAZINE |
| HH-P-46 Revision E:1975 | PACKING; ASBESTOS, SHEET, COMPRESSED |
| MIL-S-3404 Revision C:1975 | SURVEYING SET, PRECISE BASELINE, SPECIALIZED SET FOR FIRST ORDER ACCURACY, PACKAGING OF |
| MIL-A-38346 Revision D:1970 | AIR CONDITIONER A/E32C-25 |
| MIL-I-83262 Revision B:1977 | INDICATOR, TEMPERATURE, THERMOCOUPLE HERMETICALLY SEALED, GENERAL SPECIFICATION FOR |
| MIL-F-36674 Base Document:1970 | FLASK, VOLUMETRIC, PLASTIC |
| MIL-G-762 Revision E:1990 | GRADER, ROAD, PACKAGING OF |
| MIL-A-36247 Revision A:1970 | AUDIOMETER, AUTOMATIC |
| MIL-H-43048 Revision B:1981 | HOOD, FLEXIBLE, GASOLINE RESISTANT, PROTECTIVE |
| MIL-C-12539 Revision B:1960 | CHARGER, BATTERY, METALLIC, POWER UNIT, PP-34/MSM |
| RR-K-795 Revision A:1974 | KEY CHAIN, REEL (DOOR KEY AND DRILL CHUCK KEYS) |
| MIL M 7793 : F | METER, TIME TOTALIZING |
| MIL L 47178 : 0 | LENS, PLASTIC, OPERATION |
| GG-O-635 Revision A:1977 | OPTICAL FLATS |
| GG-S-001015 Revision A:1969 | SYRINGE, FOUNTAIN |
| GG-C-550 Revision B:1988 | COMPASS, DRAFTING, PIVOT, DROP SPRING BOW, PEN AND PENCIL, WITH CASE |
| MIL-C-49468 Base Document:1990 | CRYSTAL UNITS, QUARTZ, PRECISION, GENERAL SPECIFICATION FOR |
| MIL-B-4042 Revision E:1986 | BORESCOPE ASSEMBLIES, CYLINDER INSPECTION |
| MIL-I-22027 Base Document:1959 | IGNITER, JET ENGINE, MK 243 MOD 2 |
| MIL-A-55379 Revision A:1979 | ANTENNA GROUP, P/O DIRECTION FINDER SET AN/TRQ-30()(V) |
| MIL-C-17112 Revision A:1973 | COPPER-NICKEL-ZINC ALLOY (NICKEL-SILVER): CASTINGS |
| MIL-T-52418 Revision B:1978 | TENSIOMETER, GAGE INDICATING |
| MIL T 20177 : D NOTICE 1 | MILITARY SPECIFICATION TRAINING AID, MODEL BRIDGE, FOR PANEL BRIDGE, M2 BAILEY TYPE |
| MIL-I-19632 Revision B:1960 | INSULATION, ELECTRICAL, DIELECTRIC BARRIER, LAMINATED, PLASTIC FILM AND RAG PAPER |
| MIL-A-25915 Revision A:1980 | ACCELEROMETER, AIRCRAFT, PILOTS WARNING, TYPE MA-2 |
| AA-D-170 Revision A:1976 | DESK, FLAT TOP |
| GG-C-00439 Revision C:1975 | CLIP, SUTURE, MICHEL, 16 MM |
| MIL H 3780 : C NOTICE 1 | HANGER AND TRACK SETS, HORIZONTAL SLIDING DOOR |
| MIL-S-20660 Revision C:1977 | STEREOSCOPE, LENS-PRISM-MIRROR, AERIAL PHOTOGRAPH INTERPRETATION (WITH BINOCULARS AND CASE) |
| FF-P-00416 Revision F:1971 | PIN, SAFETY |
| MIL-C-52299 Revision D:1991 | CLAMP ASSEMBLY, TRESTLE BRACING |
| MIL-C-44046 Revision A:1981 | CONTAINER, HIGH SPEED, AERIAL DELIVERY |
| MIL-I-46437 Revision B:1970 | IGNITER, DOCUMENT DESTROYER, INCENDIARY, M25 |
| MIL-P-5610 Revision D:1968 | PARACHUTE ASSEMBLIES AND MAJOR SUB-ASSEMBLIES, PACKAGING AND PACKING OF |
| MIL-P-8853 Base Document:1958 | PASTE, COPPER BRAZING, WATER THINNING |
| MIL-K-83525 Base Document:1985 | KIT, PORTABLE OPTICAL MICROSCOPE, MILITARIZED, 200X MAGNIFICATION FOR FIELD INSPECTION OF OPTICAL FIBERS |
| GG S 00750 : B | STENCIL DUPLICATING PRINT KIT, HAND STAMP |
| MIL-D-11381 Revision E:1977 | DRAFTING EQUIPMENT SET, TOPOGRAPHIC BATTALION, HEADQUARTERS AND SERVICE COMPANY, PACKAGING OF |
| MIL-M-49089 Base Document:1976 | MAST AB-864( (/G AND MAST EXTENSION KIT MK-1624) (/G |
| MIL S 52792 : 0 | SURVEY SET, HYDROLOGY, PACKAGING OF |
| DOD-E-24618 Base Document:1983 | ELECTRODES, SILVER-SILVER CHLORIDE, REFERENCE TYPE PORTABLE CELLS AND REPLACEMENT ELEMENTS |
| MIL-S-22805 Revision B:1993 | SPRAY KIT, SELF PRESSURIZED |
| GG-C-620 Revision C:1962 | COUNTER, RECIPROCATING, HAND-HELD |
| SAE AS 85080 : 2012 | INSULATION SLEEVING, ELECTRICAL, SHRINKABLE WITHOUT HEAT, GENERAL SPECIFICATION FOR |
| MIL-C-43899 Revision A:1985 | COUPLING, EXTRACTION FORCE TRANSFER, PLATFORM |
| MIL-B-36275 Revision A:1976 | BOX, SHIPPING, HISTOPATHOLOGICAL SPECIMENS, DISPOSABLE |
| HH-I-525 Revision A:1968 | INSULATION BOARD, THERMAL CORK (SUPERSEDES HH&C&561B) |
| MIL-S-19819 Revision C:1974 | SWITCH, FIRING, MARK 8 MOD O AND 1 (INERTIA) FOR EXPLODER MECHANISM MARK 19 SERIES |
| MIL-C-22896 Revision A:1968 | CONTACTOR |
| MIL-T-37638 Revision A:1978 | TEST TUBE, 12 BY 75 MM POLYSTYRENE DISPOSABLE |
| MIL-G-36721 Base Document:1970 | GAGE, COMPOUND PRESSURE-VACUUM, DIAL INDICATING |
| MIL-A-36494 Base Document:1966 | AUDIOMETER, PORTABLE |
| MIL-A-37270 Base Document:1976 | ARCH BOARD FILE AND BOX, PRESCRIPTION FILING |
| MIL-S-24660 Base Document:1985 | SPRINKLER HEAD, 180 DEGREES FULL CONE |
| MIL C 55040 : B NOTICE 1 | CABLE, SPECIAL PURPOSE, ELECTRICAL (RETRACTILE) |
| MIL-B-43542 Revision B:1985 | BOOT, DOG |
| MMM-A-185 Revision B:1974 | ADHESIVE RUBBER (FOR PAPER BONDING) |
| MIL-I-24739 Revision A:1991 | INFLATION ASSEMBLY, AUTOMATIC MANUAL, LIFE PRESERVER |
| MIL-M-55198 Revision A:1977 | MICROPHONE, DYNAMIC M-116 ( ) /G |
| MIL-L-5057 Revision F:1981 | LIGHT, INSTRUMENT, INDIVIDUAL, GENERAL SPECIFICATION FOR |
| MIL-S-36177 Base Document:1964 | SACK, SHIPPING, PAPER |
| MIL-A-21672 Base Document:1958 | ARMING CELL MARK 2 MODS 1 AND 2 |
| MIL R 6855 : E | RUBBER, SYNTHETIC, SHEETS, STRIPS, MOLDED OR EXTRUDED SHAPES |
| MIL K 36311 : C NOTICE 1 | KNIVES, MICROTOME |
| MIL-P-46121 Revision B:1977 | ELASTIC SHEET AND COATING MATERIAL, PARA-XYLYLENE POLYMERS |
| MIL-P-55149 Revision B:1988 | POST, BINDING, ELECTRICAL (INSULATED AND UNINSULATED) GENERAL SPECIFICATION FOR |
| MIL-L-52325 Revision D:1988 | LAUNCHER, TRANSPORTER, BRIDGE M48A5 OR M60A1 TANK CHASSIS |
| MIL-V-62038 Revision E:1988 | VEHICLE, WHEELED, PREPARATION FOR SHIPMENT AND STORAGE OF |
| L-P-375 Revision D:1994 | PLASTIC FILM, FLEXIBLE, VINYL CHLORIDE |
| MIL W 3903 : D | WIRE ROPE ASSEMBLY, SINGLE LEG |
| GG-H-0080 Revision A:1967 | HANDLE AND BLADE SET, SURGICAL KNIFE, DETACHABLE BLADE |
| MIL-R-81158 Revision A:1966 | REAR COVER ASSEMBLED UNIT (FOR TORPEDO MARK 37 MODS O AND 1) |
| MIL-B-43666 Revision D:1986 | BOXES, SHIPPING, CONSOLIDATION |
| MIL-P-71093 Base Document:1992 | POWDER, IGNITION, GASLESS, F-33B |
| MIL-E-3677 Revision D:1993 | ERECTION EQUIPMENT FOR BRIDGE, FIXED, STEEL PANEL, BAILEY TYPE |
| MIL-G-3787 Revision G:1976 | GLASS, LAMINATED, FLAT [EXCEPT AIRCRAFT] |
| MIL-E-24759 Base Document:1991 | REDUCTOR ASSEMBLY IN-LINE, 90 GALLONS PER MINUTE, PORTABLE AQUEOUS FILM-FORMING FOAM (AFFF) LIQUID CONCENTRATE |
| MIL-C-52947 Revision B:1986 | COAGULANT, WATER TREATMENT: POLYELECTROLYTE, CATIONIC, LIQUID |
| MIL-R-51397 Revision C:1981 | REFILL KIT, CHEMICAL AGENT AUTOMATIC ALARM, ABCA-M229 |
| AA-C-112 Revision D:1976 | CARTS, SURGICAL DRESSING |
| MIL T 18752 : NOTICE 1 | TRACER MARK 5 MOD 1 |
| GG-G-00650 Revision A:1970 | GRID, RADIOGRAPHIC, STRAIGHT, WAFER TYPE |
| GG-B-00821 Revision E:1976 | BURS, DENTAL EXCAVATING, TUNGSTEN CARBIDE |
| MIL-A-52759 Base Document:1973 | ANTI-TANK MINE DISPENSING SYSTEM, PACKAGING OF |
| MIL H 18288 : 0 | HOSE AND HOSE ASSEMBLIES, AIRCRAFT, SELF SEALING, AROMATIC FUEL |
| NNN D 350 : A NOTICE 1 | DISH GUM TEST |
| DD-B-601 Base Document:1959 | BOTTLE, STOPPER, MILK DILUTION, 160 MILLILITRES |
| NNN-T-698 Base Document:1963 | TRIPOD LABORATORY APPARATUS |
| MIL-B-26994 Revision E:1992 | BALANCER, VEHICLE WHEEL, ON-VEHICLE TYPE |
| ASTM F 1182 : 2007 : R2013 | Standard Specification for Anodes, Sacrificial Zinc Alloy |
| GG W 00101 : C | WASHERS, BEDPAN AND URINAL |
| MIL-S-58095 Revision A:1986 | SEAT SYSTEM: CRASH RESISTANCE, NON-EJECTION, AIRCREW, GENERAL SPECIFICATION FOR |
| MIL B 22191 : D | BARRIER MATERIAL, TRANSPARENT, FLEXIBLE, HEAT SEALABLE |
| MIL-B-45081 Revision E:1991 | BLAST CLEANING MACHINE: SELF-CONTAINED TUMBLE TYPE, WITH DUST COLLECTOR |
| L R 00350 : A | RIBBONS, TYPEWRITER AND COMPOSING MACHINE, CHANGEABLE TYPE STYLE, POLYETHYLENE |
| MIL-G-46382 Base Document:1963 | GAGE, SNAP, THREAD ROLL |
| MIL-N-51301 Base Document:1969 | NICKEL CHLORIDE, HEXAHYDRATE, ANALYZED REAGENT |
| MIL-G-52538 Revision B:1978 | GENERATOR SET, GASOLINE ENGINE TRAILER MOUNTED 10KW 60 HERTZ PU-332A/G |
| MIL-A-51312 Base Document:1969 | ANTIMONY TRIOXIDEM, ANALYZED REAGENT |
| MIL W 23351 : A | WAVEGUIDE, SINGLE RIDGE AND DOUBLE RIDGE, GENERAL SPECIFICATION FOR |
| MIL-S-52781 Revision A:1979 | STRIP, MARKING, ALUMINUM |
| MIL-T-55335 Base Document:1971 | TEST FACILITIES KIT, MK-1191 ( ) /AR(UNITS OF) |
| MIL R 83725 : B | RELAY, VACUUM, GENERAL SPECIFICATION FOR |
| MIL T 38230 : B (1) | TRANSMITTER, PRESSURE TRU 66/A OIL, VARIABLE RELUCTANCE |
| MIL-I-23366 Revision B:1987 | INDICATOR, HORIZONTAL SITUATION ID-1O13(*)/A |
| GG R 001638 : NOTICE 1 | REMOVAL, DENTAL CROWN, SIMPLEX |
| MIL-C-62074 Revision C:1985 | CHASSIS, WEAPON, FULL-TRACKED, M741, AND M741A1; PROCESSING FOR STORAGE AND SHIPMENT OF |
| GG S 00176 : C | SCREEN, X-RAY INTENSIFYING |
| NNN E 00920 : B | EXTRACTION ASSY |
| MIL-B-43119 Revision B:0197 | BRACKET, M21 REEFING LINE CUTTER, CARGO PARACHUTE CANOPY |
| MIL-B-36470 Base Document:1966 | BASKET, PIPET, PLASTIC |
| DDD-D-00620 Base Document:1965 | DRAPE, SURGICAL, PLASTIC, STERILE 18 BY 36 INCHES |
| MIL-N-36124 Revision B:1975 | NEEDLES, HYPODERMIC, DISPOSABLE |
| MIL-G-45811 Revision D:1992 | GAGE, AIR, LOW PRESSURE, PNEUMATIC FLOATING EQUIPMENT |
| MIL R 3533 : B | RUBBER, SYNTHETIC, SHEET, STRIP AND MOLDED |
| HH-I-545 Revision B:1971 | INSULATION, THERMAL AND ACOUSTICAL (MINERAL FIBER, DUCT LINING MATERIAL) |
| MIL-W-19088 Base Document:1955 | WATTMETER, SWITCHBOARD TYPE 4-1/2 INCH |
| QQ-W-390 Revision C:1970 | WIRE, NICKEL-CHROMIUM-IRON ALLOY |
| PPP-C-850 Revision D:1964 | CUSHIONING MATERIAL, POLYSTYRENE EXPANDED, RESILIENT (FOR PACKAGING USES) |
| MIL-B-87167 Base Document:1985 | BELT, AIRCRAFT SAFETY, HBU-12/A |
| MIL-N-58106 Base Document:1982 | NET, HELICOPTER CARGO CARRYING EXTERNAL 5,000 AND 10,000 POUND CAPACITIES |
| MIL-I-25861 Revision D:1967 | INDICATOR, PRESSURE, HYDRAULIC, 0-4000 PSI INTEGRALLY LIGHTED |
| MIL-I-6514 Revision B:1988 | INDICATOR, OIL PRESSURE, 0-200 PSI, 320 DEGREE, TYPE B-9C |
| MIL-S-51201 Revision A:1969 | SAMPLING & ANALYZING KIT, CBR AGENTS, M19 |
| KK-W-266 Revision A:1961 | WHEEL, BUFFING, CHAMOIS, 3 INCH |
| MIL-T-46114 Revision B:1978 | TAPE, GLASS-SETTING, RUBBER, UNCURED (FOR SEALING GLASS WINDOWS) |
| LLL-C-83 Revision B:1977 | CANES, WALKING |
| QQ-B-654 Revision A:1980 | BRAZING ALLOY, SILVER |
| MIL-M-36314 Revision B:1976 | MICROTOME, ROTARY, AUTOMATIC |
| MIL-P-18177 Revision C:1960 | PLASTIC SHEET, LAMINATED, THERMOSETTING, GLASS FIBER BASE, EPOXY RESIN |
| MIL-B-45977 Revision B:1990 | BINS, CABINETS, SHELVING AND WORKTABLES, PACKAGING OF |
| GG-S-773 Revision D:1978 | STRAIGHTEDGES: PLASTIC AND WOOD |
| MIL-R-12323 Revision G:1992 | REFRIGERATOR AND RELATED EQUIPMENT, PACKAGING AND PACKING OF |
| MIL W 30508 : 0 | WIRE, ARMATURE BANDING |
| NNN-D-340 Revision A:1962 | DISH EVAPORATING NON METALLIC |
| MMM-A-1058 Revision A:1975 | Adhesive, Rubber Base, (in Pressurized Dispensers) |
| MIL-J-36511 Base Document:1966 | JAR, PIPET, PLASTIC |
| MIL-P-43604 Revision A:1971 | PLASTIC TUBING (FLEXIBLE, POLYURETHANE FILM) |
| MIL-S-5804 Revision C:1967 | SEAT, AIRCRAFT, TROOP, WALL STYLE |
| MIL-L-43693 Revision A:1991 | LOWERING DEVICE, PERSONNEL AND CARGO |
| MIL-S-55062 Base Document:1959 | SUPPORT, ANTENNA AB-461 ( ) GL |
| MIL-B-36162 Revision C:1987 | BLADES, LARYNGOSCOPE, MILLER |
| MIL-A-52879 Revision C:1992 | Alarm, Audible, BZ-204/FSS-9(V) (No S/S Document) |
| MIL W 85 : G | WAVEGUIDE RIGID RECTANGULAR GENERAL SPECIFICATION FOR |
| MIL-C-87032 Revision B:1986 | COVERALLS DIVER'S (MK-12) |
| MIL-P-19692 Revision E:1994 | PUMPS, HYDRAULIC, VARIABLE FLOW, GENERAL SPECIFICATION FOR |
| UU T 54 : E | TAB, INDEX, GUMMED |
| MIL-D-87030 Revision B:1986 | DIVER DRESS SUIT (MK 12) |
| GG-H-1212 Revision A:1975 | HAMMER, REFLEX TESTING, TAYLOR |
| MIL-C-6183 Revision B:1981 | CORK AND RUBBER COMPOSITION SHEET, FOR AROMATIC FUEL AND OIL RESISTANT GASKETS |
| GGG-B-440 Revision B:1964 | Blade, Circular Saw, Woodcutting |
| MIL-S-13282 Revision B:1973 | SILVER AND SILVER ALLOYS |
| MIL-B-36893 Revision A:1975 | BRONCHOSCOPE, FIBER OPTIC, HOLINGER |
| MIL-B-28644 Revision A:1988 | BED, BUNK, STEEL, SQUARE TUBE, WITH END PANELS, SINGLE AND DOUBLE-DECK |
| MIL D 5480 : F | DATA, ENGINEERING AND TECHNICAL REPRODUCTION REQUIREMENTS FOR |
| GG-L-00110 Revision A:1971 | LANCET, FINGER BLEEDING |
| MIL-G-52627 Revision A:1971 | GENERATOR SET, GASOLINE ENGINE, TRAILER MOUNTED 5KW 60 HERTZ PU-409A/M |
| MIL-F-52847 Base Document:1975 | FILTER ELEMENT, FLUID PRESSURE, COALESCER, OILY WASTEWATER, EXPENDABLE, AND PREFILTER ELEMENTS, OILY WASTEWATER, EXPENDABLE |
| MIL-P-19918 Base Document:1952 | PACKING, V RING |
| MIL-B-45548 Revision D:1988 | BEAD BREAKER, PNEUMATIC TIRE, PORTABLE (TIRE SIZES 14.00-24 THROUGH 37.5-33) |
| MIL-M-13787 Base Document:1954 | MOTOR, ALTERNATING CURRENT, FRACTIONAL HORSEPOWER, SQUIRREL CAGE (FOR COMMUNICATION AND OTHER ELECTRONIC AND SPECIAL MILITARY APPLICATIONS). |
| MIL-B-3402 Revision C:1984 | BLOWER, GASOLINE-DRIVEN, AIRCRAFT VENTILATION, PORTABLE 2,900 CFM TYPE A-2 |
| GGG-P-441 Revision A:1965 | PLATES, ANGLE, ADJUSTABLE AND SOLID |
| MIL S 51028 : B | SAMPLING AND GAGING KIT, PETROLEUM: PORTABLE |
| MIL-A-25463 Revision B:1982 | ADHESIVE, FILM FORM, METALLIC STRUCTURAL SANDWICH CONSTRUCTION |
| MIL-I-695 Revision B:1969 | INSULATION, ELECTRICAL, PAPER [SLOT CELL] |
| MIL-S-14197 Revision B:1977 | STUD, PHOTOGRAMMETRIC SLOTTED TEMPLETS |
| DOD-P-15816 Revision C:1977 | PARTS, HARD RUBBER, FOR USE WITH SUBMARINE STORAGE BATTERIES (METRIC) |
| TT-C-499 Revision A:1975 | COATING COMPOUND, CHEMICAL RESISTANT, CLEAR |
| MIL-B-36538 Revision A:1974 | BAG, BUCKSHOT |
| ZZ-C-730 Revision A:1973 | CUPS AND GLIDES, FURNITURE |
| MIL W 55153 : A | WIND MEASURING SET AN/PMQ-3 ( ) |
| MIL F 6001 : A | FITTING, AIRCRAFT, SOLDER TYPE TUBE |
| GG-S-325 Base Document:1961 | SHIELD, EYE, SURGICAL, FOX |
| MIL-P-37748 Base Document:1978 | PSYCHROMETER, SLING |
| MIL-P-36907 Revision A:1976 | PIPET-DILUENT, BLOOD, LABORATORY |
| MIL-G-1086 Revision E:1975 | GASKET MATERIAL, SYNTHETIC RUBBER [FOR BOLTED STEEL TANKS] |
| LLL-S-720 Revision A:1974 | STIRRING STICK, BEVERAGE (WOOD) |
| L-P-315 Revision C:1972 | PIPE, PLASTIC (POLYETHYLENE, PE, SDR-PR) |
| MIL-G-7734 Revision C:1981 | GAGE, PRESSURE ENGINE AND UTILITY AIRCRAFT |
| MIL-A-5540 Revision B:1967 | ADHESIVE, POLYCHLOROPRENE |
| U-T-00190 Revision A:1964 | TEST PAPER AND COLOR CHART, GLUCOSE IN URINE, 100 TABLETS |
| MIL-A-36644 Base Document:1970 | APPLICATOR SET, PIN RETENTION, DENTAL |
| MIL R 39032 : D | RESISTOR, PACKAGING OF |
| MIL-T-37594 Base Document:1977 | THERMOMETER, SELF INDICATING, LIQUID IN GLASS, INCUBATOR, O DEGREES TO 70 DEGREES C |
| MIL-C-16385 Revision E:1972 | CARTRIDGE, CARBON DIOXIDE, INFLATABLE LIFE PRESERVER USE |
| MIL M 3996 : C | MATTRESSES (EXCEPT PNEUMATIC TYPE), PACKAGING AND PACKING OF |
| MIL-R-14328 Revision B:1975 | RUBBER SHEET, SYNTHETIC, MEDIUM SOFT, GENERAL-PURPOSE GASKET MATERIAL (FOR EXTREME CLIMATIC CONDITIONS) |
| MIL-V-8965 Revision B:1990 | VALVE CORE, OXYGEN, HIGH PRESSURE |
| MIL-D-45503 Revision A:1961 | DRIVE, HYDRAULIC, T46 |
| MIL-F-36748 Base Document:1971 | FUNNEL, COMMON, LABORATORY POLYETHYLENE, OUTSIDE RIBBED |
| MIL E 44258 : A | ELECTRICAL DISTRIBUTION ASSEMBLIES FOR TENT, EXTENDABLE, MODULAR, PERSONNEL (TEMPER) |
| MIL S 23769 : C | SEAL, SECURITY |
| MIL S 43243 : C | SEPARATOR, PARACHUTE REMOVABLE CONNECTOR LINK |
| AA-C-00288 Revision B:1968 | CHAIRS, FOLDING, WOOD, WITHOUT ARMS |
| MIL-B-44418 Base Document:1991 | Boot Wall, Fabric Assemblies, Standardized Integrated Command Post System (SICPS) (No S/S Document) |
| MIL-T-36966 Revision A:1978 | TUBING, NONMETALLIC, RUBBER |
| MIL-M-50974 Revision C:1983 | MOTOR DETONATOR ASSEMBLY, ROCKET, LOADING ASSEMBLING AND PACKING (FOR DEMOLITION KIT, CRATERING M180) |
| GG-R-563 Revision B:1957 | ROLL, ABSORBENT COTTON AND ROLL, CELLULOSE |
| HH-P-119 Revision A:1967 | PACKING MATERIAL, SEWER JOINT, ASPHALT-SATURATED CELLULOSE-FIBER |
| MIL-F-27656 Revision C:1987 | FILTER UNIT, FLUID, PRESSURE MXU-4O8/M, ABSOLUTE 5 MICRON, HYDRAULIC |
| MIL G 8348 : H | GAGE, ASSEMBLIES, AIR PRESSURE, DIAL INDICATING CHUCK TYPE SELF CONTAINED |
| MIL O 38338 : C (1) | OIL QUANTITY GAGING SYSTEM, CONTINUOUS TRANSISTORIZED NUCLEONIC, GENERAL SPECIFICATION FOR |
| MIL-A-25896 Revision E:1983 | ADAPTER, PRESSURE FUEL SERVICING, NOMINAL 2.5 INCH DIAMETER |
| MIL-B-43308 Revision B:1969 | BINDING MACHINE, PLASTIC BINDING ELEMENT, AND PUNCHING MACHINE PAPER |
| MIL-S-43012 Revision C:1988 | SAMPLER, SOIL |
| MIL-D-36622 Base Document:1970 | DISH, BIOLOGICAL PREPARATION [STENDER DESIGN] |
| MIL S 11086 : D NOTICE 1 | STRAP, HOSE, AND LADDER |
| MIL T 15659 : H | TERMINAL, LUG, SOLDER, COPPER AND PHOSPHOR BRONZE |
| MIL-P-52455 Revision A:1970 | PIN REGISTER PUNCH BOARDS, PIN REGISTER BARS AND PIN REGISTER PLATES |
| MIL-C-172 Revision C:1958 | CASES: BASES, MOUNTING & MOUNTS, VIBRATION (FOR USE WITH ELECTRONIC EQUIPMENT) |
| MIL S 24251 : B | SHIELD, RETAINER (BASES), AND ADAPTERS, ELECTRON TUBE, HEAT DISSIPATING, GENERAL SPECIFICATION FOR |
| MIL-A-36955 Base Document:1973 | ANOSCOPE, FANSLER, 6 CM. |
| MIL-W-52815 Base Document:1974 | WASHER: INSULATING, FOR SPLIT-KNOB TYPE ELECTRICAL INSULATOR |
| GGG-S-630 Revision D:1986 | SPREADERS, TIRE, PNEUMATICALLY OPERATED |
| MIL-H-27269 Revision A:1977 | HORIZONTAL SITUATION INDICATOR GROUP AF A24J AND 1 |
| HH-P-41 Revision D:1986 | PACKING, ASBESTOS, ROPE AND WICK |
| NNN-B-001291 Base Document:1996 | BASKET TEST TUBE |
| MIL-T-47051 Revision A:1974 | TUBING, HEAT SHRINKABLE |
| MIL-S-3644 Revision B:1985 | SHAFT ASSEMBLY, FLEXIBLE |
| MIL-L-52052 Revision D:1980 | LIFE PRESERVER, PARACHUTIST TYPE B-7 |
| MIL-B-14563 Revision C:1983 | BOOTH, SPRAYING, DRY (BENCH TYPE WITH LEGS) |
| NNN-G-690 Base Document:1963 | GRADUATE LIQUID LABORATORY PLASTIC |
| MIL R 83536 : SUPP 1 | RELAYS, ELECTROMAGNETIC, ESTABLISHED RELIABILITY |
| MIL M 2082 : C | METERS, FLOW, MECHANICAL, VOLUMETRIC POSITIVE DISPLACEMENT, LIQUID, COLD WATER AND HOT WATER TYPE, NAVAL SHIPBOARD USE |
| GG-P-118 Revision C:1975 | PARALLEL RULER, FOLDING TYPE |
| MIL-C-55398 Base Document:1973 | COMPENSATOR, MAGNETIC FLUX CN-405 ( )/ASN |
| MIL B 197 : F INT AMD 2 | BEARINGS, ANTIFRICTION, ASSOCIATED PARTS AND SUBASSEMBLIES, PREPARATION FOR DELIVERY OF |
| MIL-G-52647 Base Document:1969 | GENERATOR SET, DIESEL ENGINE, TRAILER MOUNTED, 60 KW, 400 HERTZ, PU-707/M |
| GG-B-426 Revision B:1960 | BLOCK, BITE |
| DD-G-451 Revision D:1977 | GLASS, FLOAT OR PLATE, SHEET, FIGURED (FLAT, FOR GLAZING, MIRRORS AND OTHER USES) |
| AA-B-60 Base Document:1959 | BASSINET AND DRESSING TABLE COMBINATION, HOSPITAL, CORROSION-RESISTING STEEL |
| MIL-W-52686 Revision B:1983 | WELDING SET, ARC, INERT GAS SHIELDED PACKAGING OF |
| MIL-C-8956 Revision A:1970 | CLAMP, LOOP TUBE SUPPORT |
| MIL-P-44012 Revision A:1979 | PACK, PARACHUTIST'S, DRAGON MISSILE |
| MIL-S-55094 Base Document:1960 | STAKE, GUY AND OTHER HARDWARE FOR ANTENNA MASTS |
| GG-L-340 Base Document:1960 | LIGHT, COLOR PERFECTION TESTING |
| MIL-T-43238 Revision C:1984 | TABLE, SHADOW, PARACHUTE CANOPY INSPECTION |
| MIL-T-20193 Revision D:1978 | TABLE, STEREOPLOTTER, PROJECTION: MULTIPLEX, WITH CHEST |
| MIL-C-10597 Revision E:1983 | CLEANING COMPOUND WITH CONDITIONER AND INHIBITOR FOR ENGINE COOLING SYSTEMS |
| GG-P-115 Base Document:1988 | PARACHUTE, METEOROLOGICAL |
| MIL-S-82489 Base Document:1967 | SWITCH, DRIVER MARK 76 MOD 0 |
| NN-H-93 Revision C:1995 | HANDLE, HICKORY, STRIKING TOOL |
| MIL-C-6499 Revision E:1970 | CLOCK, AIRCRAFT MECHANICAL TYPE A 13A |
| MIL-S-14249 Revision C:1981 | STRAIGHTEDGE, RADIAL LINE, SLOTTED TEMPLET. |
| MIL-T-12681 Revision A:1955 | TEST SET, TELEPHONE (TEST SET TS-190)(/U) |
| MIL-S-81771 Revision A:1975 | Seat System; Aircrew, Crash Resistant; General Specification for |
| MIL-B-36039 Revision B:1989 | BAG, GUN CREW FIRST AID KIT |
| JJ-S-746 Revision A:1956 | STOCKINET, SURGICAL |
| MIL W 583 : C | WIRE, MAGNET, ELECTRICAL |
| MIL-S-25093 Revision B:1963 | SEA RESCUE KITS, DROPPABLE |
| MIL-M-43248 Revision C:1982 | MATS, REINFORCING, GLASS FIBER |
| MIL-T-13057 Revision C:1981 | THERMOMETER, SELF-INDICATING, LIQUID-IN-GLASS (FOR PRECISION LEVEL ROD) |
| MIL-P-52981 Base Document:1980 | PLANIMETER, POLAR, COMPENSATING, WITH CASE |
| MIL-G-25667 Revision B:1970 | GLASS, MONOLITHIC, AIRCRAFT GLAZING |
| MIL-I-3374 Revision A:1955 | INSULATION CLOTH AND TAPE, ELECTRICAL, VARNISHED CAMBRIC |
| MIL P 6074 : A | PRESERVATION, PACKAGING AND PACKING OF PROPELLERS, PROPELLER SPARES AND PROPELLER ACCESSORIES |
| MIL-R-6336 Revision D:1970 | RECTIFIER, SILICON, DIRECT CURRENT, TRAINER POWER SUPPLY, TYPE F-1 |
| QQ-W-423 Revision B:1969 | FEDERAL SPECIFICATION - WIRE, STEEL, CORROSION RESISTING |
| MIL C 19836 : B | COOLER, FLUID, INDUSTRIAL, AIR MOTOR AND GENERATOR, NAVAL SHIPBOARD |
| MIL P 19834 : B | PLATE, IDENTIFICATION, METAL FOIL, ADHESIVE BACKED |
| MIL-C-23465 Base Document:1962 | CONNECTION, FLEXIBLE, PIPE LOOPS, FOR STEAM TO MAIN AND AUXILIARY TURBINES (SIZES 4 AND 6 INCHES IPS) |
| MIL-P-19161 Revision A:1956 | PLASTIC SHEET, LAMINATED, GLASS CLOTH POLYTETRAFLUOROETHYLENE RESIN |
| MIL-B-5046 Revision D:1968 | BOARD, CHART PLOTTING MARK 7 [ASG] |
| MIL I 26359 : B | INDICATOR, ATTITUDE, REMOTE ARU-4/A |
| MIL-P-9389 Revision A:1987 | PUMP PRESSURE, OIL AND FREE AIR, TYPE MA AND 3 |
| MIL A 24215 : A | ATTENUATORS, VARIABLE (COAXIAL AND WAVEGUIDE), GENERAL SPECIFICATION FOR |
| MIL P 23971 : B | POWER DIVIDERS, POWER COMBINERS AND POWER DIVIDER/COMBINERS, GENERAL SPECIFICATION FOR |
| MIL-I-27203 Revision B:1987 | INDICATOR, POSITION, WING FLAP |
| MIL-B-60410 Base Document:1966 | BLASTING MACHINE, HANDLE OPERATED, METAL CASE 10 CAP CAPACITY |
| FED-STD-802 Base Document:1991 | PACKAGING OF SYNTHETIC FIBER FABRICS |
| MIL-DTL-62327 Revision B:1985 | CARRIERS, ARMORED, FULL TRACKED, M901A1, AND M901A3 TOW VEHICLE (LESS TOW WEAPON) AND M981, AND M981A3 FISTV; PROCESSING FOR STORAGE AND SHIPMENT OF (METRIC) |
| MIL-S-11030 Revision F:1990 | SEALING COMPOUND, SINGLE-COMPONENT, NON-CURING, POLYSULFIDE BASE |
| MIL-P-15877 Revision D:1973 | PIPE SUPPORT DEVICES (HANGERS AND SWAYBRACES, SHIPBOARD USE) |
| MIL-S-13119 Revision E:1984 | SPREADER, SLING, PLATE TYPE, NONADJUSTABLE |
| MIL-B-26026 Revision B:1967 | BATTERY, STORAGE, AIRCRAFT, TYPE MA-2-1 |
| MIL-D-43699 Revision C:1987 | DRUMS, FABRIC, COLLAPSIBLE, (DRINKING WATER, 55-,250- & 500 GALLON CAPACITIES) |
| MIL-T-22120 Base Document:1959 | TELESCOPE MARK 116 MOD 0 |
| SAE ARP 1835 : 2013 | PREPARATION FOR DELIVERY, GENERAL REQUIREMENTS FOR HOSE ASSEMBLIES |
| MIL-T-53066 Revision B:1994 | TANK, FABRIC, COLLAPSIBLE, 5000 BARREL, FUEL |
| MIL-A-37953 Base Document:1983 | ANESTHESIA APPARATUS, GAS, NITROUS OXIDE |
| MIL P 43649 : B (1) | PARACHUTES, CARGO, 12-,26-, AND 34-FOOT DIAMETER |
| MIL-A-55101 Revision A:1962 | ANTENNA AT-912()/VRC |
| MIL-H-9896 Revision C:1988 | HARDWARE, UNIVERSAL LOAD CARRYING SLING |
| MIL-S-52156 Revision D:1988 | SURVEYING INSTRUMENT, DISTANCE MEASURING, ELECTRONIC MICROWAVE |
| MIL-T-53029 Revision C:1994 | TANKS, FABRIC, COLLAPSIBLE, 10,000 20,000 AND 50,000 GALLON, DRINKING WATER |
| MIL-B-29604 Base Document:1994 | Body Armor, Hard, Small Arms Protective, PRU-61/P22P-15 |
| MIL V 25675 : B | VALVE, CHECK, MINIATURE, HYDRAULIC, AIRCRAFT AND MISSILE |
| MIL-G-52483 Revision B:1980 | GENERATOR SETS GASOLINE ENGINE, TRAILER-MOUNTED 10 KW, 60 HERTZ, PU-619/M |
| MIL-B-26195 Revision C:1987 | BOXES, WOOD CLEATED, SKIDDED, LOAD BEARING BASE |
| MIL P 002240 : B | PAN, BIOLOGICAL, STAINING |
| NNN-M-560 Base Document:1962 | MORTAR AND PESTLE |
| MIL-T-10540 Revision D:1978 | TRACING TABLE, STEREOPLOTTER, PROJECTION, WITH CASE |
| MIL-T-38760 Base Document:1966 | TENSIOMETER DIAL INDICATING |
| GG P 00581 : D | POINTS, PULP CANAL, DENTAL, PAPER |
| MIL-S-10987 Revision E:1991 | SCALE, PLOTTING, COORDINATE (ALUMINUM, SQUARE, 1,25,000 SCALE AND 1,50,000 SCALE, GRADUATED IN METERS AND YARD) |
| L-P-1040 Revision B:1977 | PLASTIC SHEETS AND STRIPS (POLYVINYL FLUORIDE) |
| MIL-A-22337 Base Document:1964 | AMPLIFIER, RESOLVER ISOLATION |
| NNN-F-001643 Base Document:1971 | FORCEPS MICROSCOPE COVER GLASS |
| MIL T 13584 : C NOTICE 1 | TREAD RUBBER, FOR RECAPPING PNEUMATIC TIRES, AND SOLID RUBBER TIRES FOR INDUSTRIAL AND TRACK LAYING VEHICLES, PACKAGING AND PACKING OF |
| MIL-M-55565 Revision C:1988 | MICROCIRCUITS, PACKAGING OF |
| MIL-A-0083216 Revision C:1976 | AIR CONDITIONER, HORIZONTAL, 54,000 BTUH, 208/230 V |
| DDD-C-95 Base Document:1965 | CARPETS AND RUGS, WOOL, NYLON, ACRYLIC, MODACRYLIC |
| MIL C 52938 : 0 | COVER, AIR SUPPORTED, FOR 25,000 BARREL, EMBANKMENT SUPPORTED, FUEL RESERVOIR |
| MIL-C-11418 Revision H:1992 | CLAMPS, LEAK REPAIR, PIPE COUPLING; FOR USE OVER GROOVED-TYPE COUPLINGS |
| MIL I 6856 : C | INDICATOR, PRESSURE SYNCHRO 1 1/2 INCH |
| MIL C 25369 : C | CYLINDER, CARBON DIOXIDE, FOR INFLATION OF PNEUMATIC LIFE PRESERVERS |
| MIL S 3425 : B | SURVEYING SET, PRECISE LEVELLING, FOR SPIRIT LEVELLING OF SECOND ORDER ACCURACY, PACKAGING OF |
| MIL E 55119 : A | ELECTRO ACOUSTICAL TRANSDUCER EQUIPMENTS |
| MIL-S-12928 Revision H:1993 | SEPARATOR, OIL AND WATER, COMPRESSED AIR |
| MIL-A-21059 Revision A:1959 | AEROLOGICAL DISPLAY EQUIPMENT |
| MIL-I-27247 Revision C:1985 | INDICATOR, TEMPERATURE, SYNCHRO |
| MIL-B-51254 Base Document:1966 | BREATHING APPARATUS, OXYGEN GENERATING, M20 |
| MIL D 22706 : F | DUCT AND SCUFF COVER, PNEUMATIC, FLEXIBLE |
| MIL-C-27487 Revision G:1992 | COUPLING HALVES, QUICK DISCONNECT, CAM LOCKING TYPE |
| MIL C 18388 : C | COIL, TUBE DEFLECTION, AND COILS, TUBE FOCUSING |
| MIL-A-52363 Revision C:1991 | AIR CLEANERS, INTAKE: DRY-TYPE (FOR INTERNAL-COMBUSTION ENGINE) |
| FF-N-105 Revision B:1971 | NAIL, BRADS, STAPLES AND SPIKES, WIRE, CUT AND WROUGHT |
| HH-I-00536 Revision A:1963 | INSULATION, ELECTRICAL, MICA, NATURAL MUSCOVITE |
| GGG-P-00770 Revision A Interim Revision:1967 | PULLER, FUSE, (S-SHAPE) |
| MIL-D-81227 Revision B:1976 | DETECTOR KIT, WATER, AUTOMOTIVE, AVIATION FUEL |
| GG-B-00120 Revision B:1969 | BASEPLATE, DENTAL |
| MIL-T-51289 Revision B:1985 | TEST SET, FLAME THROWER - RIOT CONTROL AGENT DISPENSER, HYDROSTATIC-VOLUMETRIC, 6000 PSI, M5 |
| NNN-B-789 Base Document:1963 | BURET STRAIGHT PRECISION (SUPERSEDES IN PART FED SPEC DD-V-581A) |
| MIL-D-82062 Revision C:1992 | DERRICK, BARGE MOUNTING, 100-LONG-TON CAPACITY |
| GGG-G-770 Revision B:1973 | GUN, AIR BLOW, (BLAST CLEANING) |
| GGG-B-471 Revision B:1964 | BLADE, COPING SAW; AND BLADE, JEWELLERS' SAW |
| MIL-E-62484 Revision C:1990 | EARTHMOVER, ARMORED COMBAT, M9, PROCESSING FOR SHIPMENT AND STORAGE OF |
| MIL P 20664 : C NOTICE 3 | PLANIMETER, POLAR, COMPENSATING, WITH CASE |
| MIL-A-36059 Base Document:1961 | APRON, X-RAY PROTECTIVE |
| MIL-A-27198 Revision B:1987 | ALTIMETER, PRESSURE AAU-7/A |
| MIL-B-15228 Revision G:1988 | BED, BUNK, STEEL, ROUND TUBE, SINGLE AND DOUBLE-DECK (CONVERTIBLE TYPE) |
| MIL-F-46851 Revision C:1993 | FAN, GUIDED MISSILE, GROUND SUPPORT EQUIPMENT, GENERAL SPECIFICATION FOR |
| MIL F 14263 : A | FILTER, BAND PASS F-237()/GRC |
| MIL-E-278 Revision B:1958 | ELECTRODE, WELDING, COVERED, ALUMINUM BRONZE |
| MIL I 28791 : 0 | ISOLATOR, RADIO FREQUENCY GENERAL SPECIFICATION FOR |
| GG T 00380 : A | |
| DDD-P-001024 Base Document:1965 | PAD, MEDICATED |
| MIL-W-9049 Revision D:1990 | WEBBING, TEXTILE, NYLON, LOCKING LOOP |
| MIL-A-11610 Revision B:1959 | ADAPTER, LINE, FILLING, 1-TON CONTAINER, M1 |
| GG C 871 : C | CURVES, DRAFTING, REGULAR, AND IRREGULAR, CURVE SET, DRAFTING, REGULAR, AND IRREGULAR (GENERAL SPECIFICATION) |
| MIL-S-81732 Base Document:1969 | SEALING COMPOUND, ELECTRICAL, HIGH STRENGTH, ACCELERATOR REQUIRED |
| H-B-621 Revision F:1958 | BRUSH, STENCIL |
| GGG-A-825 Revision A:1967 | AUGER MACHINE, PIPE AND SEWER, POWER OPERATED |
| MIL-R-15041 Revision C:1960 | RELEASE, LIFESAVING EQUIPMENT, HYDRAULIC AND MANUAL |
| MIL-T-52943 Base Document:1978 | TANK, FABRIC, COLLAPSIBLE, PILLOW TYPE (FOR POTABLE WATER) |
| O-C-114 Revision B:1974 | CALCIUM, HYPOCHLORITE, TECHNICAL |
| MIL-C-37675 Base Document:1977 | CODEINE SULFATE TABLETS, NF |
| MIL P 18722 : 0 | PYROMETERS, PORTABLE, HANDHELD. |
| MIL-D-7106 Revision C:1987 | DRIFTMETER, ELECTRICALLY DRIVEN GYRO STABILIZED |
| MIL I 82929 : A | INITIATOR, EXPLOSIVE ACTUATED, JAN-24/A |
| MIL V 47306 : B | VALVE, STOP LIFT CHECK |
| MIL-B-2213 Revision D:1992 | BRIDGE CONVERSION SET, FIXED BRIDGE: BAILEY; CONSTRUCTION OF ONE PANEL CRIB PIER, 31 FEET 7 INCHES HIGH, 145-TON |
| MIL H 22199 : E | HELMET, SAILOR S, REINFORCED PLASTIC, MK 3 MOD O |
| MIL-P-52897 Revision A:1982 | POWER PLANT, ELECTRIC, TRAILER MOUNTED, DIESEL ENGINE, 10 KW, 50/60 HERTZ, AN/MJQ-18 |
| MIL-W-25913 Base Document:1957 | WAVEGUIDE, RIDGED ASSEMBLIES, FLEXIBLE AND RIGID, GENERAL SPECIFICATION FOR |
| DOD-P-28682 Base Document:1987 | CONCRETE PLANT, MOBILE, SEMITRAILER MOUNTED, 6 CUBIC METERS BULK MATERIAL CAPACITY (METRIC) |
| MIL-I-26860 Revision B:1972 | INDICATOR, HUMIDITY, PLUG, COLOR CHANGE |
| MIL-I-17205 Revision C:1961 | INSULATION CLOTH AND TAPE, ELECTRICAL, GLASS FIBER, VARNISHED |
| SAE AS 85731 : 2015 | FASTENER, POSITIVE LOCKING, ELECTRONIC EQUIPMENT, GENERAL SPECIFICATION FOR |
| MIL A 85097 : B | AIRCREW ESCAPE PROPULSION SYSTEMS (AEPS), PROCUREMENT SPECIFICATION FOR |
| MIL S 13789 : D | STRAINER, SEDIMENT, PIPELINE, BASKET TYPE |
| MIL-P-40029 Revision B:1968 | PANEL MARKER, AERIAL LIAISON, COTTON DUCK, PANEL AL-125 |
| MIL P 3627 : D | PENETROMETER, SOIL, DIAL INDICATING [TWO CONES] AND SPRING INDICATING [AIRFIELD CONE] |
| MIL-T-8652 Revision A:1959 | TIEDOWN, CARGO, AIRCRAFT, 5,000 LB CAPACITY, TYPE MC 1 |
| MIL A 3933 : E | ATTENUATORS, FIXED GENERAL SPECIFICATION FOR |
| MIL-R-24414 Revision D:1991 | REEL, HOSE, FIRE FIGHTING, MANUALLY OPERATED |
| HH-B-100 Revision B:1973 | BARRIER MATERIAL VAPOR (FOR PIPE, DUCT AND EQUIPMENT THERMAL, INSULATION) |
| GGG-S-62 Revision D:1986 | SAW, CHAIN, PORTABLE, POWER |
| MIL-S-11716 Revision D:1993 | SUPERSTRUCTURE, STEEL, FOR BRIDGE, FLOATING, PNEUMATIC FLOAT, CLASS 60 |
| MIL C 12386 : E | CLAMP, REPAIR, PIPE: WITH GASOLINE-RESISTANT GASKET, GENERAL SPECIFICATION FOR |
| MIL-B-52088 Revision F:1992 | BRIDGE, ARMOURED VEHICLE LAUNCHED, SCISSORING TYPE, CLASS 60, ALUMINUM, 60 FOOT SPAN |
| MIL-A-23899 Revision B:1984 | AURAL PROTECTOR, SOUND |
| SAE AS 5778 : 1997 | COVERS, AIRCRAFT COMPONENTS, GENERAL REQUIREMENTS FOR |
| DOD-B-24505 Revision C:1980 | BATTERY, STORAGE, SILVER-ZINC ALKALINE TYPE (FOR DSRV) (METRIC) |
| MIL P 11720 : D NOTICE 1 | PROTRACTOR, RECTANGULAR (PLASTIC, 1 3/4 INCHES BY 6 INCHES) |
| MIL-T-12839 Revision D:1981 | THERMOMETER, SELF-INDICATING, LIQUID IN GLASS, BASE LINE TAPE, WITH CASE. |
| MIL A 25676 : D | ADAPTOR, PRESSURE LUBRICATING OIL SERVICING, AIRCRAFT |
| MIL-B-37410 Base Document:1977 | BURNER, GAS, LABORATORY AND CARTRIDGE, ASSEMBLY |
| MIL H 3679 : A | HEADSET, ELECTRICAL |
| MIL-C-36066 Revision B:1962 | CHLOROQUINE AND PRIMAQUINE PHOSPHATES TABLETS |
| MIL-A-81403 Base Document:1967 | ALTIMETER-ENCODER, AAU-21/A |
| MIL-P-53045 Revision A:1985 | POWER PLANT, ELECTRIC DIESEL ENGINE, TRAILER MOUNTED, 10KW, 400HERTZ, AN/MJQ-25 |
| MIL-C-11743 Revision F:1989 | CASE, MAINTENANCE AND OPERATIONAL MANUALS |
| MIL P 43184 : 0 | PLATFORM COMPONENTS, AIR DELIVERY. MODULAR (DUAL RAIL SYSTEM), TYPE II |
| AA-S-704 Revision A:1971 | STOOL, STEP, CASTER MOUNTED, SAFETY |
| MIL N 49065 : E | NIGHT VISION GOGGLES AN/PVS-5A |
| UU-P-561 Revision H:1972 | PAPER, TRACING |
| SAE AMS R 25988 : 2017 | RUBBER, FLUOROSILICONE ELASTOMER, OIL-AND-FUEL-RESISTANT, SHEETS, STRIPS, MOLDED PARTS AND EXTRUDED SHAPES |
| ASTM F 1348/F1348M : 1991 : R2002 | Standard Specification for Pneumatic Rotary Descaling Machines |
| SAE AMS P 22968 : 2016 | PAPER, RECORDING, HEAT SENSITIVE |
| ASTM E 784 : 1989 : R2000 : EDT 1 | Standard Specification for Clamps, Utility, Laboratory, and Holders, Buret and Clamp |
| SAE AMS R 83283 : 2014 | RUBBER SILICONE, HIGH STRENGTH, CABIN PRESSURE SEAL MATERIAL, DIAPHRAGM TYPE |
| SAE AS 23479 : 2012 | INDICATOR, PRESSURE, 1 1/2-INCH, INTEGRALLY LIGHTED |
| ASTM F 957 : 1991 : R1996 | Standard Specification for Gong, Sound Signaling |
| ASTM F 1312 : 1990 : R2007 | Standard Specification for Brick, Insulating, High Temperature, Fire Clay |
| ASTM E 784 : 1989 : R2011 | Standard Specification for Clamps, Utility, Laboratory, and Holders, Buret and Clamp |
| ASTM F 1245 : 1989 : R2001 | Standard Specification for Faucets, Single and Double, Compression and Self-Closing Type, Shipboard |
| MIL-R-6130 Revision C:1980 | RUBBER, CELLULAR, CHEMICALLY BROWN |
| MIL B 22020 : D | BAGS, TRANSPARENT, FLEXIBLE, SEALABLE, VOLATILE CORROSION INHIBITOR TREATED |
| MIL E 53126 : 0 | ELECTRICAL DISTRIBUTION EQUIPMENT |
| MIL-A-27582 Revision A:1963 | ADAPTER, TEST MX-6050/PSM-6 |
| SAE AMS A 25463 : 2013 | ADHESIVE, FILM FORM, METALLIC STRUCTURAL SANDWICH CONSTRUCTION |
| MIL-R-36837 Base Document:1972 | RACK, TEST TUBE, LABORATORY, POLYPROPYLENE |
| MIL-C-22229 Revision A:1973 | COPPER BASE ALLOY CASTINGS (FOR PRESSURE TIGHT APPLICATIONS) |
| MIL-A-46153 Revision C:1991 | ANTIFREEZE, ETHYLENE GLYCOL, INHIBITED, HEAVY DUTY, SINGLE PACKAGE |
| MIL-T-55655 Revision A:1972 | TEST FACILITIES KIT MK-980 ( ) /PPS-5 |
| MIL-C-81302 Revision D:1985 | CLEANING COMPOUND, SOLVENT, TRICHLOROTRIFLUOROETHANE |
| MIL P 2845 : 0 | PACKAGING OF MAIN PROPULSION SHAFTING BEARINGS, BOAT AND SHIP PROPELLERS AND ASSOCIATED REPAIR PARTS |
| MIL-R-55242 Base Document:1963 | RADIO SET AN/GRC-109 () (UNITS OF) |
| MIL A 5503 : E | ACTUATOR, AERONAUTICAL LINEAR UTILITY, HYDRAULIC, GENERAL SPECIFICATION FOR |
| MIL-A-49079 Revision A:1986 | ALTIMETER SET, ELECTRONIC AN/APN-209(V) (UNITS OF) |
| MIL-F-36747 Revision A:1975 | FLASK, ERYLENMEYER, GRADUATED PLASTIC |
| MIL S 37062 : B | SPECTROPHOTOMETER, PHOTOELECTRIC |
| PPP-H-1581 Revision A:1977 | HARDWARE (FASTENERS AND RELATED ITEMS) PACKAGING OF |
| AA-W-001791 Revision A:1973 | WARDROBE AND JANITOR'S CLOSET, WOOD, STEEL FRAME |
| ASTM E 784 : 1989 : R2005 | Standard Specification for Clamps, Utility, Laboratory, and Holders, Buret and Clamp |
| UU-B-335 Revision A:1957 | BINDER, LOOSE LEAF, (WITH OR WITHOUT FLEXIBLE PRONG) |
| MIL-V-36590 Revision A:1975 | VIEW BOX, RH BLOOD TYPING 115 VOLT, AC DC |
| MIL-S-22614 Base Document:1964 | SWITCH, SENSITIVE |
| MIL L 44033 : A NOTICE 1 | LINES MULTI LOOP, CONCENTRIC |
| MIL-T-8598 Revision B:1990 | TRANSMITTER, TEMPERATURE, ELECTRICAL RESISTANCE, FLUSH-MOUNTED, FREE AIR |
| PPP-P-600 Revision G:1992 | PORCELAIN ENAMEL PRODUCTS AND HOUSEHOLD APPLIANCES, ELECTRICAL AND MECHANICAL REQUIREMENTS FOR PACKAGING OF |
| MIL-S-12651 Revision F:1983 | SPRAYER, PACKAGING OF |
| MIL C 47027 : 0 | COMPOUND, MOLDING, PLASTIC, RIGID, THERMOPLASTIC |
| MIL H 85800 : 0 | HOSE ASSEMBLIES, POLYTETRAFLUOROETHYLENE, ARAMID FIBER REINFORCED, 5000 & 8000 PSI, GENERAL SPECIFICATION FOR |
| MIL-P-53123 Base Document:1992 | POWER UNITS/POWER PLANTS, ELECTRIC, DIESEL ENGINE, TRAILER MOUNTED, GENERAL SPECIFICATION FOR |
| AA-C-001770 Revision A Interim Revision:1978 | CABINET, WARDROBE AND STORAGE, CONTEMPORARY STYLE, STEEL, GENERAL OFFICE |
| MIL S 4510 : E | SPOTLIGHT, INCANDESCENT, ROOF MOUNTED, AUTOMOTIVE |
| MIL-A-37861 Base Document:1978 | ANTISEPTIC-ANESTHETIC SOLUTION, PHENOLATED |
| MIL-A-21430 Revision B:1974 | ACCESSORY SET MARK 1 MOD 1 |
| MIL-N-3944 Revision D:1981 | NONFERROUS PRODUCTS (OTHER THAN ALUMINUM, MAGNESIUM COPPER OR THEIR ALLOYS) PACKAGING AND PACKING OF |
| MIL-L-20213 Revision E:1980 | LITHIUM HYDROXIDE (LiOH), TECHNICAL |
| MIL-H-11689 Revision C:1974 | HAMMER, PNEUMATIC, PORTABLE, NAIL-DRIVING |
| MIL-V-83271 Revision B:1992 | VEST, SURVIVAL, MESH NET, SRU-21/P |
| MIL-C-13959 Revision B:1976 | CAMERA SET, STILL PICTURE KS-7 |
| MIL H 29181 : B | HASP, HIGH SECURITY,SHROUDED FOR HIGH AND MEDIUM SECURITY PADLOCK GENERAL SPECIFICATION FOR |
| MIL-A-22335 Base Document:1964 | AMPLIFIER, VARIABLE GAIN |
| MIL P 43607 : G | PADLOCK, KEY OPERATED, HIGH SECURITY, SHROUDED SHACKLE |
| GG T 00750 : A | TUBE, DUODENAL, SURGICAL, REHFUSS |
| H B 00621 : G | BRUSH, STENCIL |
| GG M 00112 : NOTICE 1 | MANOMETER OUTFITS, SPINAL-FLUID (WATER-TYPE) |
| MIL W 12065 : D | WINCHES, DRUM, HAND OPERATED; SPUR GEAR, 2 OR 3 PURCHASE |
| MIL-T-27-233 Base Document:1978 | TRANSFORMERS AND INDUCTORS (AUDIO POWER AND HIGH POWER PULSE) INDUCTOR CHARGING TF5S37ZZ |
| MIL-T-49057 Revision A:1983 | TEST SET, IFF INTERROGATOR AN/TPM-25A |
| MIL-R-45906 Revision D:1984 | RELEASE, TWO POINTS - SINGLE PULL, PARACHUTIST'S EQUIPMENT PACK |
| MIL-G-20241 Revision D:1980 | GASKET MATERIAL, WOOL FELT, IMPREGNATED, ADHESIVE, PRESSURE-SENSITIVE |
| MIL-R-3065 Revision E:1984 | RUBBER, FABRICATED PRODUCT |
| MIL-A-43146 Revision B:1985 | ACCESSORY SET, PARACHUTE, SCUBA ADAPTING |
| MIL-B-52808 Revision A:1979 | BOXES, STORAGE, PHOTOMAPPING, PAPER ROLL |
| MIL-A-52019 Revision C:1991 | ADAPTER ASSEMBLY, GLIDE ANGLE LIGHT TO STAKE OR CONE |
| MIL-S-47129 Revision A:1988 | SILICON DIOXIDE, MICROFINE |
| MIL T 21038 : D | TRANSFORMERS, PULSE, LOW POWER, GENERAL SPECIFICATION FOR |
| MIL-A-8576 Revision C:1984 | ADHESIVE, ACRYLIC BASE, FOR ACRYLIC PLASTIC |
| MIL C 3643 : A | CONNECTOR, COAXIAL RADIO FREQUENCY, SERIES HN ASSOCIATED FITTINGS GENERAL SPECIFICATION FOR |
| MIL-V-11671 Revision A:1951 | VIBRATOR PACK PP-68 ()/U |
| GGG-H-570 Revision A:1965 | HOLDER AND GUIDE, DRIVE PIN |
| MIL-I-25479 Revision A:1987 | INDICATOR, MACH NUMBER, SENSITIVE, SERVOED, RANGE .5 TO 1.O, TYPE ME-5 |
| GG C 001321 : B | CASTING MACHINE, DENTAL METALS, AND REPLACEMENT PARTS |
| MIL-R-52676 Revision A:1975 | RECTIFIER SECTION, TOPOGRAPHIC MAPPING SET, TRUCK MOUNTED, PACKAGING OF |
| DOD-T-46151 Revision A:1979 | TAPE,ADHESIVE, RUBBER (METRIC) |
| MIL C 55330 : B | CONNECTORS, PREPARATION FOR DELIVERY OF |
| MIL-F-62668 Base Document:1989 | FIGHTING VEHICLE, INFANTRY M2, M2A1, M2A2, & FIGHTING VEHICLE, CAVALRY M3, M3A1, M3A2 - PROCESSING FOR STORAGE & SHIPMENT |
| GG-B-686 Revision B:1957 | BROACH, ROOT CANAL, DENTAL |
| GG P 001278 : A | PLASTIC-FILLING INSTRUMENTS AND CONTOURING INSTRUMENT, DENTAL |
| MIL-O-18521 Base Document:1955 | OGIVE, PLASTIC, FOR FUSE MK 29 |
| GG K 00508 : C | KNIFE, PLASTER, DENTAL |
| MIL-Y-1140 Revision H:1972 | Yarn, Cord, Sleeving, Cloth, and Tape-Glass |
| MIL-A-26360 Revision B:1982 | AMPLIFIER, ELECTRONIC CONTROL ASU-3/A |
| MIL-B-37811 Revision A:1978 | BURS, DENTURE TRIMMING, STRAIGHT HANDPIECE, TUNGSTEN CARBIDE |
| MIL-S-21433 Revision A:1959 | SOCKETS, TURNBUCKLES, AND TURNBUCKLE ASSEMBLIES - WIRE ROPE, WEDGE AND THREADED LOCK SLEEVE |
| NNN T 780 : B NOTICE 1 | TUBE CENTRIFUGE GLASS |
| MIL-A-27330 Revision B:1987 | ACCELEROMETER, ELECTRICAL, LINEAR TRU-3/A |
| MIL-L-741 Revision D:1984 | LEAD, ELECTRICAL, ARC WELDING |
| GG-C-00420 Base Document:1964 | CLAMP, RUBBER, TUBING, SHUTOFF |
| MIL-P-47099 Revision A:1989 | POLYURETHANE FOAM, POLYETHER TYPE, RIGID, FOR PACKAGING AND ENCAPSULATION OF ELECTRONIC COMPONENTS |
| DOD-B-24507 Revision B:1978 | BATTERY CELLS, STORAGE, SILVER-ZINC ALKALINE TYPE (FOR NR-1) (METRIC) |
| MIL-B-36341 Revision A:1975 | |
| MIL-R-22528 Base Document:1964 | RESISTOR, VARIABLE, PRECISION |
| MIL-D-37005 Revision A:1976 | DISK, FILTERING, MICROPOROUS, HYDROSOL TYPE, 47MM. DIAMETER, 100S |
| MIL T 49136 : 0 | TEST SET, COUNTERMEASURES SET AN/ALM-178(( |
| GGG-S-00625 Base Document:1964 | SPOON, BODY AND FENDER |
| MIL-R-21252 Revision B:1987 | RUBBER SHEET, SOLID, SYNTHETIC, SHIPBOARD WATER EVAPORATOR GASKETING |
| L-P-392 Revision A:1964 | PLASTIC MOLDING MATERIAL, ACETAL, INJECTION AND EXTRUSION |
| MIL-R-51305 Base Document:1969 | RADIOACTIVE TEST SAMPLE, KRYPTON 85, MX7338/PDR-27R |
| MIL-A-516 Revision J:1981 | AUGER, EARTH, SKIDMOUNTED; AND AUGER, EARTH, TURNTABLE BASE MOUNTED, POWER DRIVEN |
| MIL D 26392 : C | DUMMY CONVERTERS, LIQUID OXYGEN INDICATOR SYSTEM 10 LITER CRU-23/A AND 25 LITER CRU-24/A |
| MIL T 55225 : 0 | TRANSMISSION MEASURING SET TS-559()/FT |
| DDD-M-001349 Base Document:1967 | MAT, FLOOR AND MATTING, PILE SURFACE, ENTRANCE WAY TYPE |
| GG-P-00636 Revision B:1973 | PRESS, DENTURE FLASK |
| MIL-T-26609 Revision C:1994 | TRANSMITTER, POSITION |
| MIL-I-43684 Revision B:1989 | INTRENCHING TOOL, HAND, FOLDING, LIGHTWEIGHT, AND CARRIER |
| MIL-B-36560 Revision A:1975 | BASSINET AND PRESSING TABLE COMBINATION, HOSPITAL |
| MIL-W-12404 Revision E:1970 | WIND MEASURING SET AN/GMQ-11 (UNITS OF) |
| MIL-G-58103 Base Document:1979 | GRIP ASSEMBLY, CYCLIC CONTROLLER, HELICOPTER |
| MIL S 18313 : G | SLINGS, CARGO, NET, NYLON WEBBING |
| GG-C-136 Revision B:1958 | CATHETERS, URETERAL, (X-RAY, GRADUATED) |
| MIL-C-10541 Revision D:1978 | COOLING UNIT, STEREOPLOTTER PROJECTION |
| MIL-B-16041 Revision G:1993 | BUILDINGS, PREFABRICATED, READY-CUT, MAGAZINES, STEEL ARCH, 16- AND 25-FOOT SPAN (EXTENSIBLE) |
| MIL-C-2070 Revision E:1985 | CHAIN ASSEMBLY, SINGLE LEG FOR CABINET,GASOLINE, FIELD RANGE OUTFIT |
| MIL-I-545 Revision B:1976 | INSULATION SHEET, ELECTRICAL, PAPER, PRESSBOARD |
| MIL-I-7085 Revision C:1994 | INDICATOR, PRESSURE, ENGINE, 0-50 PSI |
| MIL-T-45542 Revision D:1990 | TOOL SET, SHOP SETS AND KITS MAINTENANCE, MODIFICATION AND TOOL PACKAGING OF |
| MIL-F-85720 Base Document:1985 | FITTING, TUBE, FLUID SYSTEMS, SEPARABLE, HIGH PRESSURE, DYNAMIC BEAM, SEAL, GENERAL SPECIFICATION FOR |
| MIL-S-29398 Revision C:1984 | SLING SYSTEM, HELICOPTER EXTERNAL CARGO 40,000 POUND CAPACITY |
| MIL-T-50036 Revision B:1992 | TALC, TECHNICAL, T1 AND T3 |
| MIL K 23714 : C | KIT, SAMPLING, FOR AVIATION FUELS, REUSABLE |
| PPP-B-140 Revision C:1993 | BATTERY, STORAGE, INDUSTRIAL, PACKAGING OF |
| RR-S-001301 Base Document:1967 | SAFETY EQUIPMENT, CLIMBING |
| L-F-333 Revision A:1974 | FILM, PHOTOGRAPHIC, MOTION PICTURE (BLACK AND WHITE) |
| MIL-P-51315 Revision A:1983 | POTASSIUM BIFLUORIDE, TECHNICAL |
| MIL-T-22238 Revision H:1987 | TANK, LIQUID STORAGE, METAL FOR PETROLEUM PRODUCTS, HORIZONTAL W/SKIDS, 6OO GALLON CAPACITY |
| DOD-A-10825 Revision A:1979 | ALUMINUM OXIDE, ANHYDROUS, ANALYZED REAGENT (METRIC) |
| MIL-P-51300 Base Document:1952 | PHOSPHOROUS TRICHLORIDE, ANALYZED REAGENT |
| MIL-F-10915 Revision L:1972 | FUZE, HAND GRENADE, RIOT, POCKET, CS,M201A1E1, FUZE, FLOATING SMOKE POT, M207A1, AND FUZE, INCENDIARY, M210 |
| MIL-P-13981 Revision A:1971 | PHOSPHOROUS ACID, ANALYZED REAGENT |
| MIL-Z-51317 Base Document:1969 | ZINC CARBONATE, ANALYZED REAGENT |
| SS S 535 : B | SODIUM BORATE, DECAHYDRATE, TECHNICAL (BORAX) |
| MIL-P-4861 Revision C:1991 | PACKING, PREFORMED, RUBBER PACKAGING OF |
| MIL-B-85099 Base Document:1978 | BATTERY, WET PRIMARY FOR AN/DKT-37(V) TELEMETRY PACKAGE |
| MIL-A-52832 Revision A:1976 | ALARM SET, ANTI-INTRUSION, RESTRICTED AREA: AN/GSQ-159 (DSID) |
| MIL-I-7171 Revision D:1993 | INSULATION BLANKET, THERMAL ACOUSTICAL |
| MIL-G-49140 Base Document:1977 | GENERATOR, DIRECT CURRENT G67((/G |
| MIL-PRF-25690 Revision B:1993 | PLASTIC, SHEET AND FORMED PARTS, MODIFIED ACRYLIC BASE, MONOLITHIC, CRACK PROPAGATION RESISTANT |
| MIL-R-9300 Revision B:1968 | RESIN, EPOXY, LOW-PRESSURE LAMINATING |
| MIL-C-52707 Revision D:1983 | COVER, FOXHOLE OVERHEAD PROTECTION |
| MIL R 15624 : F | RUBBER GASKET MATERIAL, 50 DUROMETER HARDNESS (MAXIMUM) |
| GG-D-00441 Revision C:1969 | DISPENSER, STRIP, DENTAL |
| MIL-T-55570 Base Document:1967 | TEST SET, ELECTRONIC CIRCUIT PLUG IN UNIT AN/ARM-87 ( ) (UNIT OF) |
| MIL-C-40643 Revision B:1976 | CLIP, FASTENER, CONTAINER |
| MIL-A-22339 Base Document:1964 | AMPLIFIERS, COMPUTATION |
| HH-P-151 Revision F:1985 | PACKING; RUBBER-SHEET, CLOTH-INSERT |
| MIL H 55535 : 0 | HEADSET MICROPHONE KIT MK-1039/G |
| NNN-P-001482 Revision B:1972 | PIPET SEROLOGICAL SAHLI DILUTING HAEMOGLOBINOMETER 0.02 MI |
| UU-S-48 Revision F:1973 | SACK, SHIPPING, PAPER |
| MIL-B-43444 Revision A:1975 | BAG, PLASTIC, CONTAMINATED WASTE DISPOSAL |
| MIL-P-55010 Revision A:1965 | PLASTIC SHEET, POLYETHYLENE TEREPHTHALATE |
| NNN-S-00100 Base Document:1996 | SCRAPER LABORATORY RUBBER |
| MIL-S-28600 Revision A:1976 | SORBENTS, FLOATING (FOR OIL SPILL REMOVAL) |
| MIL-R-83248 Revision C:1994 | RUBBER, FLUOROCARBON ELASTOMER, HIGH TEMPERATURE, FLUID, AND COMPRESSION SET RESISTANT |
| MIL-M-83524 Base Document:1985 | MICROSCOPE, OPTICAL, MONOCULAR, HAND-HELD, PORTABLE, MILITARIZED, 200X MAGNIFICATION, FOR FIELD INSPECTION OF OPTICAL FIBERS |
| MIL-B-13157 Revision C:1980 | BRIDGE, FIXED: PANEL, SINGLE LANE, ALUMINUM |
| MIL-A-52318 Revision A:1971 | ANCHOR ASSEMBLY, HAND WINCH: FOR MEDIUM CABLEWAY |
| MIL S 23586 : E | SEALING COMPOUND, ELECTRICAL, SILICONE RUBBER, ACCELERATOR REQUIRED |
| MIL-S-0053046 Revision A:1994 | SURVEYING EQUIPMENT, ELECTRONIC DISTANCE MEASURING, MEDIUM RANGE, (SEDME MR) |
| MIL-C-14518 Revision E:1992 | CONNECTOR, BRIDLE LINE: SHEAVE TYPE |
| MIL-I-22110 Revision C:1985 | INHIBITORS, CORROSION, VOLATILE, CRYSTALLINE POWDER |
| MIL P 008184 : D | PLASTIC SHEET, ACRYLIC, MODIFIED |
| C-F-202 Revision F:1985 | FELT SHEER (HAIR) AND FELT ROLL (HAIR) |
| MIL-A-3248 Revision B:1970 | AMYL NITRITE (INHALANTS) |
| MIL-G-28554 Revision C:1988 | GENERATOR SET, MOBILE ELECTRIC POWER AND SUPPLEMENTAL EQUIPMENT, PACKAGING OF |
| W-A-450 Revision C:1990 | COMPONENTS FOR INTERIOR ALARM SYSTEMS |
| MIL-P-25374 Revision B:1985 | PLASTIC SHEET, ACRYLIC, MODIFIED, LAMINATED |
| MIL-I-83245 Revision A:1994 | INDICATOR SET, OIL PRESSURE A/A24J-17 |
| MIL-S-3443 Revision G:1993 | SHOTGUN, 12 GAGE, RIOT TYPE |
| MIL C 55116 : B | CONNECTOR, MINIATURE AUDIO, FIVE PIN |
| O-S-571 Revision G:1991 | SODIUM CARBONATE, ANHYDROUS, TECHNICAL |
| MIL-S-22783 Revision C:1972 | SEALING MACHINES, ELECTRICAL IMPULSE (JAW TYPE) |
| GGG-T-00570 Revision A:1965 | TORCH KIT, SOLDERING (PROPANE GAS) |
| MIL-B-273 Revision F:1990 | Bag, Drinking Water Storage, Dispensing, Cloth, Cotton Duck, Porous |
| MIL F 81836 : A SUPP 1 | FILTER AND DISPOSABLE ELEMENT, FLUID PRESSURE, HYDRAULIC, 3 MICRON ABSOLUTE |
| MIL-P-6131 Revision C:1984 | PLUG, DEHYDRATOR, HUMIDITY, INDICATING |
| MIL-C-13602 Revision C:1967 | CASE, PANEL MARKER FOR AERIAL COMMUNICATION PANEL MARKER SETS AP-30-C AND AP-30-D |
| MIL-R-25410 Revision G:1991 | REGULATORS, OXYGEN, DILUTER-DEMAND AUTOMATIC-PRESSURE BREATHING |
| MIL-S-53120 Base Document:1994 | SUPPORT SYSTEM, SPECIAL DIVER'S AIR (SDASS) |
| MIL-T-50059 Revision B:1983 | TITANOUS SULFATE SOLUTION, 20-PERCENT (METRIC) |
| MIL-B-3180 Revision E:1990 | BOILERS AND RELATED EQUIPMENT; PACKAGING OF |
| MIL-C-18539 Base Document:1955 | CARTRIDGE, SLICK MARKER AN- MK 1 MOD 0 |
| MIL-B-48056 Base Document:1972 | BARRIER MATERIAL, FLEXIBLE, WATERVAPORPROOF, PUNCTURE-RESISTANT, HEAT SEALABLE FOR PACKAGING AMMUNITION |
| MIL A 51027 : A | ANTISETTING COMPOUND, DECONTAMINATING SLURRY, M2 |
| MIL-T-55631 Base Document:1972 | TRANSFORMER, INTERMEDIATE FREQUENCY, RADIO FREQUENCY, AND DISCRIMINATOR, GENERAL SPECIFICATION FOR |
| MIL-M-18058 Revision G:1990 | MACHINERY, METAL & WOODWORKING PACKAGING OF |
| MIL-S-52365 Revision B:1972 | SURVEYING SET, ARTILLERY FIRE CONTROL, FOURTH ORDER, PACKAGING OF |
| L-P-506 Revision A:1963 | PLASTIC SHEET AND FILM, POLYSTYRENE, BIAXIALLY ORIENTED |
| MIL B 85036 : A | BARRIER MATERIAL, HEAVY DUTY, FOR FLEXIBLE ENGINE CONTAINERS |
| MIL-A-11755 Revision E:1994 | ANTIFREEZE, ARCTIC-TYPE |
| MIL-T-52340 Revision B:1991 | TOOL, VERTICAL CONNECTING, ERECTION EQUIPMENT FOR BRIDGE, FLOATING, PNEUMATIC FLOAT CLASS 60 |
| MIL-S-7877 Revision B:1956 | |
| MIL-B-44314 Base Document:1987 | BODY ARMOR, SMALL ARMS PROTECTIVE, AIRCREWMAN |
| MIL-D-6728 Revision A:1956 | DAMPER, ENGINE EXHAUST FLAME AND GLARE |
| MIL-E-52714 Revision C:1992 | EQUIPMENT, CABLE REINFORCEMENT FOR PANEL BRIDGE M-2 (BAILEY TYPE) |
| MIL-HDBK-7 Revision B:1982 | LUMBER AND ALLIED PRODUCTS |
| MIL-C-20061 Revision D:1979 | CLINOMETERS, SHIP, AND ACCESSORIES |
| MIL W 3970 : C | WAVEGUIDE ASSEMBLIES, RIGID, GENERAL SPECIFICATION FOR |
| MIL M 21649 : C | MOUNT, RESILIENT, TYPE 5M1O,OOO-H |
| MIL-A-53129 Base Document:1992 | ALARM-MONITOR GROUP OA-9431/FSS-9(V) |
| MIL N 37136 : 0 | NORETHINDRONE WITH MESTRANOL TABLETS |
| MIL-W-45562 Revision C:1992 | WELDING AND SOLDERING EQUIPMENT, SUPPLIES AND ACCESSORIES, PACKAGING OF |
| MIL-R-37053 Revision B:1978 | REFRACTOMETER, HAND, ALUMINUM |
| MIL-D-51389 Revision A:1979 | DETECTOR UNIT, CHEMICAL AGENT AUTOMATIC ALARM, ABCA-M43 |
| MIL-P-49115 Revision A:1977 | PLATOON EARLY WARNING SYSTEM AN/TRS-2() |
| PPP-B-2920 Base Document:1997 | BOILERS AND RELATED EQUIPMENT, PACKAGING OF |
| MIL-B-11844 Revision D:1976 | BRIDGE, FIXED: STEEL, PORTABLE PANEL, BAILEY TYPE M2 (WIDENED ROADWAY) |
| MIL-I-25950 Revision B:1967 | INDICATOR, PRESSURE, OIL, 0-100 PSI |
| MIL-E-50011 Revision C:1994 | ETHANOLAMINES (MONOETHANOLAMINE, DIETHANOLAMINE, AND TRIETHANOLAMINE), TECHNICAL |
| MIL-B-27036 Revision A:1962 | BOMB, LOADING PRACTICE BDU-9/E |
| MIL-I-7071 Revision B:1972 | INDICATOR, TEMPERATURE, THERMOCOUPLE HERMETICALLY SEALED, GENERAL SPECIFICATION FOR |
| MIL G 2697 : A | GLASS, PORTLIGHT, CIRCULAR, HEAT TREATED |
| MIL S 24656 : 0 | |
| MIL B 11040 : E | BELT, V: ENGINE ACCESSORY DRIVE |
| MIL-P-85315 Base Document:1979 | Pump, Ejector, Air Vehicle Fuel, General Specification For |
| MIL S 9320 : C | SIGNAL, WARNING, AUDIBLE, FOR HEADSET |
| MIL-B-3865 Revision D:1990 | BLOCKS, ROPE, TACKLE: PACKAGING OF |
| ASTM E 784 : 1989 : R2017 | Standard Specification for Clamps, Utility, Laboratory, and Holders, Buret and Clamp |
| MIL-C-10387 Revision J:1992 | COUPLINGS, CLAMP, PIPE; WITH BOLTS AND SYNTHETIC-RUBBER GASKETS FOR GROOVED-END PIPE |
| MIL-M-36997 Base Document:1990 | MAILING CASE SECTION, MICROSCOPE SLIDE, CHIPBOARD, 12S |
| MIL-M-37217 Base Document:1976 | METER SALINITY INDICATING, ELECTRIC, FLUSH MOUNTING RECTANGULAR |
| NNN F 800 : A NOTICE 1 | FUNNEL SEPARATORY |
| MIL-B-36282 Base Document:1964 | BEAD, GLASS, LABORATORY, PLASTIC SPECTACLE FRAME WARMER, 5 LB |
| O-I-00490 Revision B:1974 | INHIBITOR, CORROSION, LIQUID COOLING SYSTEM |
| MIL-V-45554 Revision D:1989 | VULCANIZING EQUIPMENT, INCLUDING RELATED ITEMS, TIRE AND TUBE, REBUILD AND REPAIR, PREPARATION FOR DELIVERY OF |
| MIL-T-1180 Revision D:1981 | THERMOMETER, SELF-INDICATING LIQUID IN GLASS |
| L E 00530 : B | ENVELOPE, TRANSPARENT |
| MIL-T-10767 Revision F:1968 | TOWER (COMPONENTS OF) |
| MIL-R-83485 Base Document:1976 | RUBBER, FLUOROCARBON ELASTOMER, IMPROVED PERFORMANCE AT LOW TEMPERATURES |
| MMM A 131 : A NOTICE 1 | ADHESIVES: GLASS-TO-METAL (FOR BONDING OF OPTICAL ELEMENTS) |
| MIL-W-7072 Revision B:1962 | WIRE, ELECTRIC 600 VOLT, ALUMINUM, AIRCRAFT GENERAL SPECIFICATION FOR [ASG] |
| MIL-S-20197 Revision C:1977 | SCALE, PLOTTING, PRECISION, CENTIMETRES AND INCHES, WITH CASE |
| MIL-C-6235 Revision D:1970 | COMPASS, MAGNETIC, UNMOUNTED POCKET SURVIVAL |
| GG-C-106 Revision A:1961 | CALIPER, EYE, CASTROVIEJO |
| DD B 00510 : A | BOTTLE, ASPIRATOR, GLASS |
| MIL-C-60303 Revision B:1971 | CARTRIDGE, 40 MM: RIOT CONTROL, CS, M674 |
| NNN-F-001652 Base Document:1970 | FUNNEL COMMON LABORATORY POLYPROPYLENE RIBBED |
| MIL-T-7928 Revision G:1976 | TERMINAL, LUG SPLICES, CONDUCTOR, CRIMP STYLE, COPPER, GENERAL SPECIFICATION FOR |
| TT S 001543 : A | SEALING COMPOUND, SILICONE RUBBER BASE (FOR CALKING, SEALING, AND GLAZING IN BUILDINGS AND OTHER STRUCTURES) |
| MIL C 40137 : E | CLEVISES, RIGGING, AIR DELIVERY TYPE, GENERAL SPECIFICATION FOR |
| MIL-B-52598 Revision B:1969 | BAG, SAND: ACRYLIC |
| MIL R 0036579 : 0 | ROD, STIRRING, LABORATORY, POLYTETRAFLUOROETHYLENE |
| GG-H-590 Base Document:1959 | HOLDER, RADIOGRAPHIC FILM CASSETTE |
| NNN-S-450 Revision B:1976 | SLIDE MICROSCOPE |
| MIL S 3405 : B | SURVEYING SET PLANETABLE, SET 8 PACKAGING OF |
| MIL C 26518 : B | CONNECTOR, ELECTRICAL, MINIATURE, RACK AND PANEL, ENVIRONMENT RESISTING, 2OO DEGREES C AMBIENT TEMPERATURE |
| MMM-A-105 Base Document:1967 | ADHESIVE AND SEALING COMPOUNDS CELLULOSE NITRATE BASE SOLVENT TYPE |
| MIL-C-14039 Revision C:1981 | COMPASS, SUN, UNIVERSAL TYPE 0 TO 90 DEGREES, NORTH AND SOUTH LATITUDES, WITH CARRYING CASE |
| MIL-C-3779 Revision E:1991 | CASE, ENGINEER BATTALION, DRAFTING EQUIPMENT, CANVAS |
| MIL-J-8279 Revision G:1988 | Jacket, Cold Weather (No S/S Document) |
| O-F-1044 Revision B:1975 | FUEL, ENGINE PRIMER: COLD STARTING IN PRESSURIZED AND NONPRESSURIZED CONTAINERS |
| PPP-B-665 Revision D:1972 | BOXES, PAPERBOARD, METAL EDGED AND COMPONENTS |
| MIL-P-45213 Revision E:1989 | PRESERVATION AND PACKING OF ROCKET AND MISSILE SYSTEMS EQUIPMENT FOR SHIPMENT |
| NNN D 001290 : D | DESICCATOR LABORATORY AND DESICCATOR PLATES |
| MIL-I-21070 Revision B:1965 | INSULATING SHEET AND TAPE, ELECTRICAL, REINFORCED MICA PAPER |
| GG-C-560 Revision D:1986 | COMPASSES, MAGNETIC, SURVEYORS & TRANSIT, POCKET, WITH OPTIONAL BALL & SOCKET JOINT OR BALL & SOCKET HEAD, & JACOBS STAFF |
| GG-D-600 Revision D:1982 | DRAFTING INSTRUMENT SETS: AND DRAFTING INSTRUMENTS |
| MIL L 29151 : 0 | LOCK AND LOCK SETS, EXTERIOR, ORDNANCE, HIGH SECURITY |
| SS J 570 : B NOTICE 1 | JOINT COMPOUNDS AND TAPE, WALLBOARD (FOR GYPSUM WALLBOARD CONSTRUCTION) |
| MIL-P-22561 Revision C:1982 | PIPE AND PIPE FITTINGS, ACID RESISTANT |
| MIL-A-49186 Base Document:1979 | ADAPTER, TONE-SIGNALLING TA-977()/PT |
| MIL T 53068 : 0 | TANKS, LIGHTWEIGHT, COLLAPSIBLE, PILLOW, 160 GALLON (NOMINAL), DRINKING WATER |
| SAE MA 2150 : 2015 | CLAMPS, LOOP OR P STYLE, SINGLE POINT MOUNT, MULTIPLE SHAPES, METRIC |
| MIL M 11193 : D | MICROPHONE, CARBON (MICROPHONES M-29) (/U & M-52) (/U) |
| MIL-T-26963 Revision D:1992 | TESTER, PRESSURE GAGE, HYDRAULIC, PORTABLE TYPE MP-1 |
| MIL-D-771 Revision E:1990 | DISTRIBUTOR, BITUMEN AND WATER, PACKAGING OF |
| MIL-A-47074 Revision A:1983 | ADHESIVE SYSTEM, EPOXY, FOR DISSIMILAR METAL BONDING |
| UU-C-00620 Revision C:1967 | COVER, HEADREST, PAPER (DENTAL CHAIR) |
| MIL-L-13078 Revision A:1955 | LOUDSPEAKER, DYNAMIC LS-112/U, LS-116/U, LS-148/U, LS-160/U, LS-179/U, LS-181/U AND LOUDSPEAKER ASSEMBLY LS-154/U AND LS-206/U |
| MIL-B-40098 Revision H:1989 | BURNER UNIT, GASOLINE, FIELD RANGE OUTFIT, M2A |
| MIL D 53015 : NOTICE 2 | DISPLACEMENT & EVACUATION KIT, 6 INCH HOSELINE |
| AA-D-191 Revision A:1955 | DESK, STEEL, GENERAL OFFICE |
| MIL-B-40611 Revision C:1972 | BAGGING MACHINE, FRUIT AND PRODUCE |
| AA-S-00300 Revision A Interim Revision:1967 | SHELF, FILING |
| MIL-C-10085 Revision E:1977 | CUTTERS, PHOTOGRAMMETRIC, SLOTTED-TEMPLATE: HAND-OPERATED |
| MIL-C-37722 Base Document:1978 | COVER, SURGICAL INSTRUMENT AND DRESSING CABINET |
| HH-P-31 Revision F:1987 | PACKING AND LAGGING MATERIALS, FIBROUS GLASS METALLIC AND PLAIN CLOTH AND TAPE |
| MIL L 12606 : D | LOUDSPEAKER, PERMANENT MAGNET (UNENCASED, 3 INCH AND 4 INCH DIAMETER CONE, 2 WATT, FUNGUS, GUNBLAST, AND IMMERSION RESISTANT), TYPE LL-445/U, M12606-01, AND M12606-02 |
| DOD-I-51323 Revision C:1985 | INSECTICIDE, DICHLORVOS, IMPREGNATED STRIP (METRIC) |
| MIL-T-11591 Revision D:1964 | TAMPER, ARMATURE COIL WINDING |
| MIL-P-52559 Revision B:1974 | PIPE STEEL WEIGHT COATED, FOR SUBMARINE PIPELINE SYSTEMS |
| GGG-D-780 Revision A:1965 | DRIVER, PROJECTILE, UNIT, POWDER ACTUATED (TRIGGER-FIRED, LOW VELOCITY, PISTON TYPE) |
| AA-O-00240-4 Revision C Interim Revision:1970 | CREDENZA, OFFICE, STEEL |
| MIL-B-1947 Revision A:1960 | BLOWER, SOOT (SHIPBOARD USE) |
| MIL-A-37234 Base Document:1977 | APPARATUS, ANAEROBIC CULTURE |
| GG-T-258 Revision A:1967 | TESTER, BATTERY ELECTROLYTE SOLUTION |
| MIL F 12548 : A | FILTER, LOW PASS F-215/G AND FILTER, HIGH PASS F-216/G |
| MIL-A-23987 Revision A:1989 | A-FRAME, PONTOON TUG: PREFABRICATED, KNOCKED DOWN |
| GG-B-0089 Revision C:1967 | BAND, ABRASIVE, (SILICON CARBIDE) |
| MIL-F-55614 Revision B:1976 | FILTER, INFRARED INTERFERENCE-TYPE (PINK) FOR SEARCHLIGHT, INFRARED 28-VOLT, 110-AMPERE |
| MIL P 36745 : 0 | PAPER, FILTER QUALITATIVE (SWIPE MATERIAL) |
| MIL-P-81351 Revision A:1976 | PEROXIDE, METHYL ETHYL KETONE |
| W-S-865 Revision C:1959 | SWITCH BOX, (ENCLOSED), SURFACE-MOUNTED |
| GG-E-916 Revision F:1987 | EXPLORERS, DENTAL; EXPLORER-PROBE, DENTAL |
| MIL-G-81065 Revision A:1967 | GYRO-PENDULUM ASSEMBLY (FOR TORPEDO MK 46 MOD O AND MK 46 MOD 1) |
| MIL C 26516 : 0 | CAP, LUBRICATION FITTING, PROTECTIVE |
| MIL-S-53046 Base Document:1984 | SURVEYING EQUIPMENT, ELECTRONIC DISTANCE MEASURING, MEDIUM RANGE, (SEDME-MR) |
| MIL-I-25941 Revision D:1986 | INDICATOR, TURN AND SLIP, 2-INCH SIZE, INTEGRALLY LIGHTED |
| NNN-B-001194 Base Document:1966 | BOTTLE DROPPER AND DROPPING TK |
| MIL-D-11933 Revision B:1955 | DUMMY LOAD, ELECTRICAL A-64/UP |
| GGG-C-749 Revision A:1954 | CUTTER, CABLE, HAND OPERATED |
| MIL-C-87970 Base Document:1982 | CONTROL SET, GYROSCOPE, ATTITUDE HEADING AN/ASN-129 |
| MIL-H-55351 Base Document:1971 | HEADSET-MICROPHONE KIT MK-1564()/AIC (COMPONENTS OF) |
| MIL H 53076 : 1987 | HEMTT TANKER AVIATION REFUELING SYSTEM (HTARS) |
| MIL-A-47040 Base Document:1974 | ADHESIVE-SEALANT, SILICONE, RTV, HIGH TEMPERATURE |
| PPP-P-1877 Revision A:1977 | PACKAGING AND PACKING OF WOOD OFFICE FURNITURE |
| GGG-H-00110 Base Document:0196 | HANDLING TOOL, SHEET MATERIAL (VACUUM TYPE) |
| MIL L 10911 : D | LOUDSPEAKER, PERMANENT MAGNET (UNENCASED, 2.5-, 3-, 4-, 5-, 6-, 8-, 10-, AND 12-, INCH DIAMETER CONE) |
| MIL-S-13985 Revision C:1983 | SODIUM HYDROSULFITE, ANHYDROUS, TECHNICAL |
| MIL-I-7084 Revision A:1988 | INDICATOR, PRESSURE, HYDRAULIC 0-4,000 PSI |
| MIL-S-37087 Base Document:1975 | SEPARATOR, SERUM AND PLASMA, 100s |
| MIL-E-7125 Revision A:1982 | ETHYLENE GLYCOL MONOETHYL ETHER ACETATE, TECHNICAL |
| MIL-I-27848 Revision B:1994 | INDICATOR, HORIZONTAL SITUATION AQU-4/A |
| CCC C 531 : E | CLOTH, TRACING |
| MIL-F-5504 Revision B:1958 | Filters and Filter Elements, Fluid Pressure, Hydraulic Micronic Type |
| MIL-D-26124 Revision B:1977 | DUCT AND DUCT ASSEMBLY, PNEUMATIC, FLEXIBLE |
| MIL-G-25591 Revision E:1981 | GYROSCOPE, RATE, SWITCHING, TYPE MC-1 |
| MIL-P-11570 Revision C:1984 | PYROMETERS, INDICATING, THERMOCOUPLES |
| DD-J-112 Revision B:1976 | JAR, BIOLOGICAL STAINING, COPLIN |
| LLL-F-00550 Base Document:1964 | FORK AND SPOON, PICNIC (WOOD) |
| GG-B-001294 Base Document:1967 | BURNISHER, RENTAL |
| MIL-C-87975 Base Document:1985 | CLOCK, AIRCRAFT, MECHANICAL ABU-32/A |
| MIL-L-6273 Revision D:1983 | LIGHT, NAVIGATIONAL, BEACON, OBSTACLE OR CODE, TYPE G 1 |
| MIL-P-36668 Revision B:1977 | PIPET, SEROLOGICAL, STERILE, DISPOSABLE GLASS |
| MIL-C-83242 Base Document:1969 | CORD, AROMATIC POLYAMIDE, NONMELTING |
| GGG-O-591 Revision F:1977 | OILER, HAND |
| MIL-T-36974 Revision A:1975 | TUBE, BLOOD COLLECTING, VACUUM, NON STERILE |
| MIL-A-36665 Base Document:1970 | ADAPTERS, CONDUCTIVE NEOPRENE, ENDOTRACHEAL ANESTHESIA SET |
| MIL-I-5415 Revision C:1987 | INDICATOR, AIR SPEED, PITOT STATIC PRESSURE GENERAL SPECIFICATION FOR |
| MIL-G-174 Revision B:1986 | GLASS, OPTICAL |
| MIL-C-62279 Revision A:1965 | CHASSIS, TANK, ARMORED VEHICLE, BRIDGE LAUNCHER, M60A1, AND M48A5, PROCESSING FOR STORAGE AND SHIPMENT OF |
| DDD-C-001559 Base Document:1969 | CARPET, LOOP, LOW PILE HEIGHT, HIGH DENSITY, WOVEN OR TUFTED WITH ATTACHED CUSHIONING |
| UU B 43 : D NOTICE 1 | BAG, PAPER, WASTE-RECEPTACLE |
| MIL R 60346 : C | ROVING, GLASS, FIBROUS (FOR PREPREG TAPE & ROVING, FILAMENT WINDINGAND PULTRUSION APPLICATIONS) |
| GG-C-1433 Revision B:1976 | CHISELS (CUTTING INSTRUMENTS), DENTAL |
| MIL-B-36646 Revision A:1974 | BLOOD RECIPIENT SET, WITH METERING CHAMBER, WITHOUT NEEDLE, DISPOSABLE |
| L-C-110 Revision J:1958 | CELLOPHANE (COATED AND NONCOATED REGENERATED CELLULOSE FILM) |
| MIL-N-3497 Revision C:1978 | NADIRSCOPE, STEREOPLOTTER TRACING TABLE |
| MIL-T-82575 Base Document:1971 | TEST SET, TORPEDO, MARK 281 MOD 1 |
| MIL-E-37007 Revision A:1975 | EMBEDDING COMPOUND, LABORATORY, PARAFFIN AND PLASTIC POLYMERS |
| MIL-I-3825 Revision B:1965 | INSULATING TAPE, ELECTRICAL, SELF FUSING FOR USE IN ELECTRONIC COMMUNICATIONS AND ALLIED EQUIPMENT |
| MIL-B-37189 Base Document:1975 | BAGS, URINE COLLECTION |
| DDD R 311 : F (1) | RIBBONS, TYPEWRITER |
| MIL-T-3351 Revision E:1990 | TRACTOR, FULL TRACKED, LOW SPEED, TRACTOR WHEELED, AGRICULTURAL AND TRACTOR WHEELED, INDUSTRIAL AND THEIR ATTACHMENTS, PACKAGING OF |
| MIL-I-631 Revision D:1961 | INSULATION, ELECTRICAL, SYNTHETIC - RESIN COMPOSITION, NONRIGID |
| MIL-T-36381 Base Document:1965 | TUBE, CAPILLARY, BLOOD SAMPLE, CLASS 0.8 MM INSIDE DIAMETER 90 MM LONG |
| MIL-A-22334 Base Document:1964 | AMPLIFIER, SYNCHRO SERVO, 6 WATT 4OO CYCLE |
| MIL-P-3631 Revision C:1981 | PARALLEL RULER (ROLLING) |
| MIL-L-6723 Revision C:1987 | LIGHT, AIRCRAFT, GENERAL SPECIFICATION FOR |
| GG-F-599 Revision B:1988 | FORCEPS, DRESSING, DENTAL |
| MIL-B-28536 Revision C:1989 | BUILDING, PREFABRICATED, READY CUT, METAL, RIGID FRAME, 40 X 100 FEET |
| MIL-T-2487 Revision B:1975 | TEST SET, TS&27()-TSM |
| NNN C 440 : NOTICE 1 | CLAMP UTILITY LABORATORY AND HOLDER BURET CLAMP |
| MIL-H-9859 Revision A:1968 | HANDWHEEL, ORDNANCE |
| MIL C 62291 : A | CHASSIS, WEAPON, FULL TRACKED, F12253500 PROCESSING FOR STORAGE AND SHIPMENT OF |
| MIL-C-62053 Revision D:1985 | CARRIER, GUIDED MISSILE EQUIPMENT M730 AND M730A1 PROCESSING FOR STORAGE AND SHIPMENT OF |
| MIL-T-13626 Revision B:1976 | TELEPHONE SET TA-1()/PT |
| MIL-A-36725 Base Document:1970 | |
| MIL-M-64016 Base Document:1983 | MOTOR, ROCKET, METAL PARTS FOR AND LOADING ASSEMBLY FOR DEMOLITION KIT, CRATERING M180 |
| GG-C-611 Revision C:1975 | COUNTING APPARATUS, BACTERIAL COLONY AND PLATE, COUNTING, BACTERIOLOGICAL |
| MIL-T-43779 Revision C:1988 | TIMER, DELAY, RELEASE, CARGO PARACHUTE, M1 AND M2 |
| MIL-B-21902 Revision A:1963 | |
| MIL T 0014358 : B | TELEPHONE SET TA-312()/PT |
| HH-I-538 Revision B:1964 | INSULATION, ELECTRICAL, PASTED-MICA |
| MIL-B-36392 Base Document:1965 | BAR, ORTHOPAEDIC FRAME, TURNTABLE |
| DD S 750 : A | STOPPER, LABORATORY APPARATUS, TAPER-GROUND |
| GG-T-750 Base Document:1958 | TUBE, DUODENAL, SURGICAL, (REHFUSS) |
| MIL-P-36709 Base Document:1970 | PAPER, GLASSINE, WEIGHING |
| MIL-L-52413 Revision B:1990 | LIFE PRESERVER, YOKE, ORAL INFLATION, TRAPPED AIR TYPE, DESIGN 9008 |
| MIL-S-85318 Base Document:1979 | SEALING COMPOUND, NON-CARCINOGEN CURING POLYURETHANE (POLYETHER BASED), ELECTRIC CONNECTORS AND ELECTRIC SYSTEMS |
| MIL-A-14053 Revision C:1977 | ANTENNA AT-450( )/ARC |
| MIL-C-43033 Base Document:1961 | CLOTH, COTTON, WATER REPELLANT |
| GG-S-1343 Revision A:1975 | STERILIZER, SURGICAL INSTRUMENT AND SUPPLY MECHANICAL AIR REMOVAL, NONPORTABLE (HEAT AND MOISTURE STABLE) |
| QQ-C-571 Revision B:1974 | COPPER, PHOSPHOR (ALLOYING ADDITIVE) |
| MIL-S-52159 Revision C:1994 | SLING, MULTIPLE LEG .625 INCH BY 6-FOOT CHAIN, WITH SPECIAL HOOKS AND RING |
| MIL-B-11353 Revision D:1976 | BRIDGE, FLOATING: ALUMINUM; FOOT, PACKAGING OF |
| MIL-P-18516 Base Document:1955 | PRIMER MARK 108, MARK 112, MARK 113, MARK 114, ALL MODS |
| LLL-C-251 Revision A:1969 | CHARCOAL, WOOD |
| MIL-D-3209 Revision C:1973 | DISTILLATION UNITS, WATER, THERMOCOMPRESSION TYPE, PACKAGING OF |
| MIL-S-46897 Revision B:1990 | SEALING COMPOUND, POLYURETHANE FOAM |
| MIL-A-38345 Revision E:1988 | AIR CONDITIONER A/E32C-24 |
| MIL-I-27619 Revision G:1974 | INDICATORS, ATTITUDE DIRECTOR |
| MIL-DTL-31010 Base Document:1995 | JACKET, AIRCREW, COLD WEATHER, WITH REMOVABLE LINER, AND HOOD |
| MIL-B-4792 Revision E:1994 | BUMPER, RUBBER, DUPLEX ROUND |
| MIL-C-17435 Revision C:1976 | CUSHIONING MATERIAL, FIBROUS GLASS |
| MIL-T-58082 Revision A:1974 | TESTER, PYROMETER & THERMOCOUPLE, FIELD, TYPE N-3A |
| VV-S-190 Base Document:1961 | SEALING COMPOUND (DIPCOAT) |
| PPP-C-1752 Revision D:1989 | CUSHIONING MATERIAL, PACKAGING, POLYETHYLENE FOAM |
| MIL-G-52857 Revision A:1979 | GENERATOR SET, DIESEL ENGINE, TRAILER MOUNTED 15 KW, 400 HERTZ, PU-732/M |
| MIL-A-51313 Base Document:1952 | ARSENIC PENTOXIDE, ANALYZED REAGENT |
| MIL-T-52809 Revision A:1986 | TRUCKS, HAND, LIFT; PALLET, MANUAL-HYDRAULIC |
| MIL W 6496 : B NOTICE 1 | WINCH, DRUM, ENGINE OF TURRET HOIST, TYPE A-1 |
| MIL-F-10336 Revision E:1977 | FIBER SHEET, VULCANIZED |
| MIL-R-5049 Revision D:1989 | RING, WIPER, PISTON ROD |
| MIL-F-26862 Revision B:1970 | FIBERBOARD, SOLID, NON-CORROSIVE, FUNGI-RESISTANT FOR INTERIOR BLOCKING APPLICATIONS |
| QQ-P-00428 Revision C:1967 | PLATINUM FOIL (DENTAL) |
| MIL-G-52856 Revision A:1979 | GENERATOR SET, DIESEL ENGINE, TRAILER MOUNTED 15 KW, 50/60 HERTZ, PU-405 A/M |
| MIL-L-19844 Revision A:1963 | LEAD; SHIELDED, DETACHABLE IGNITION |
| MIL B 81391 : NOTICE 1 | BAG, WATERVAPORPROOF, ONE FACE TRANSPARENT, FOR INTERIOR PACKAGING |
| MIL-G-52773 Revision A:1977 | GENERATOR SET, DIESEL ENGINE, TRAILER MOUNTED 60KW 50/60 HERTZ PU-650B/G |
| MIL-C-50870 Revision C:1981 | CARTRIDGE 40MM HEDP M433 LINER FOR METAL PART |
| MIL E 37259 : 0 | ETHYNODIOL DIACETATE AND MESTRANOL TABLETS |
| MIL-T-25307 Revision D:1985 | TRANSMITTER, PRESSURE, HYDRAULIC, TYPE MJ-1 |
| MIL-T-52965 Base Document:1979 | TOPOGRAPHIC SUPPORT SYSTEM (TSS), DIRECT SUPPORT SECTION, TRUCK MOUNTED |
| MIL-A-36763 Revision A:1974 | ANESTHESIA SET, SPINAL, DISPOSABLE |
| MIL-A-55368 Base Document:1972 | AIRBORNE DATA ANNOTATION SYSTEM AN/AYA-10() |
| MIL-I-25437 Revision B:1984 | INDICATORS, AIRCRAFT, PRESSURE, VOLTAGE RATIO TYPE, GENERAL SPECIFICATION FOR |
| MIL-B-0036470 Revision A:1967 | BASKET, PIPET, PLASTIC |
| MIL S 55507 : E (2) | SHELTER, ELECTRICAL EQUIPMENT (WITH OR WITHOUT EQUIPMENT), PACKAGING OF |
| MIL-T-4782 Revision C:1972 | TRANSPARENCIES, TECHNICAL TRAINING, GENERAL SPECIFICATION |
| MIL-P-55624 Base Document:1971 | PROTECTOR, ELECTRICAL COMMUNICATION CIRCUITS GENERAL SPECIFICATION FOR |
| DD-T-710 Base Document:1957 | TUBE, CONNECTING, LABORATORY GLASSWARE AND CONNECTOR, ELASTIC TUBING, BRANCHED |
| MIL-R-17729 Revision C:1972 | RESPIRATOR OUTFIT, SUPPLIED-AIR TWO-MAN |
| TT S 00230 : C | SEALING COMPOUND, ELASTOMERIC TYPE SINGLE COMPONENT (FOR CALKING, SEALING, AND GLAZING IN BUILDINGS AND OTHER STRUCTURES) |
| MIL-P-6906 Revision B:1969 | PLATE, IDENTIFICATION AIRCRAFT |
| MIL-P-63235 Base Document:1979 | PROJECTILE, GUIDED, 155 MM, XM712, THERMAL BATTERY FOR |
| MIL-A-58066 Revision A:1966 | ALTIMETER, PRESSURE, PARACHUTIST'S |
| MIL I 87108 : A | INFLATION ASSEMBLY, FLU-2A/P |
| MIL-M-55233 Base Document:1963 | MICROPHONE M-33A/A1C |
| MIL-A-11928 Revision B:1960 | AXLE-RL-27( ) (FOR LAYING FIELD WIRE) |
| MIL-B-2331 Revision D:1985 | BUCKLES, END BAR, WITH TONGUE |
| MIL-B-37246 Base Document:1975 | BRACE, BIT, BONE, CRANIAL, HUDSON, AND BURS, DRILL, AND EXTENSION |
| MIL-L-11075 Revision G:1988 | LOOPS, STRAP FASTENER |
| MIL-P-46094 Base Document:1965 | PLASTIC FILLER COMPOUND, EPOXY FOR HONEYCOMB PANELS |
| MIL-T-52015 Revision B:1976 | TEMPLATE DRAFTING, MAP SYMBOL, FOR PLASTIC SCRIBING |
| GG-C-1213 Revision A:1977 | CURETTE, EAR, BILLEAU |
| MIL-B-55118 Revision A:1971 | BATTERIES, STORAGE, (CELLS) VENTED, NICKEL CADMIUM |
| MIL-S-81282 Revision B:1993 | STANDARD, FREE WATER DETECTOR |
| MIL-A-43326 Revision A:1983 | ALTAR, PORTABLE |
| GG-R-60 Revision C:1965 | RAZORS, SAFETY; AND BLADES, RAZOR |
| AA-B-450 Revision B:1974 | BLACKBOARD, PORTABLE |
| GG-D-1958 Base Document:1975 | DISPENSER, GUMMED TAPE (ELECTRICALLY OPERATED) |
| MIL-P-551 Revision E:1983 | PIPES AND ELBOWS, AIR CONDITIONING-HEATING |
| MIL T 37628 : 0 | TEST TUBE, 18 BY 116 MM POLYCARBONATE, CLEAR |
| MIL-S-51244 Revision A:1976 | SERVICE KIT, PORTABLE FLAME THROWER, RIOT CONTROL AGENT DISPERSER, M27 |
| MIL-I-20037 Revision B:1984 | INDICATORS, SIGHT, LIQUID LEVEL, DIRECT INDIRECT READING, TUBULAR GLASS PLASTIC |
| MIL-P-60034 Base Document:1964 | PRIMING ASSEMBLY DEMOLITION, M15 PARTS, LOADING, ASSEMBLY AND PACKING |
| MIL-F-0010135 Revision C:1968 | FACEBLANK, FIELD PROTECTIVE MASK |
| MIL C 10436 : L NOTICE 1 | COMPASS, MAGNETIC UNMOUNTED, LENSATIC LUMINOUS DIAL TRITIUM ACTIVATED, INDUCTION DAMPED, 5 DEG. AND 20 MIL GRADUATIONS, WITH CARRYING CASE |
| AA-S-271 Revision D:1967 | SHELVING, STORAGE AND DISPLAY, STEEL, INTERCHANGEABLE, NUT AND BOLT TYPE |
| GG-S-176 Revision A:1960 | SCREEN, X-RAY INTENSIFYING, ROENTGENOGRAPHIC, FOR DIAGNOSTIC RADIOGRAPHY |
| L-P-1221 Revision A:1971 | PIPE AND FITTINGS, PLASTIC, RIGID (STYRENE-RUBBER, DRAIN) |
| AA-S-130 Revision B:1991 | SCREENS, BEDSIDE, ALUMINUM |
| MIL-B-16166 Revision B:1972 | BRONZE, ALUMINUM, FORGINGS, HEAT TREATED |
| MIL S 28786 : B | SWITCHES, ELECTRICAL AND FIBER OPTIC, PACKAGING OF |
| MIL-C-52668 Base Document:1969 | CARTOGRAPHIC SECTION, TOPOGRAPHIC MAPPING SET, TRUCK MOUNTED PACKAGING OF |
| MIL M 10304 : E | METER, ELECTRICAL INDICATING, PANEL TYPE, RUGGEDIZED GENERAL SPECIFICATION FOR |
| MIL-V-0050010 Revision A:1969 | VALVE, ANTIBACK DRAFT, PROTECTIVE SHELTER, M2 |
| MIL-B-36819 Revision B:1973 | BOTTLE, SAFETY CAP PLASTIC, TABLET AND CAPSULE, ROUND, LIGHT-RESISTANT |
| MIL T 26898 : B | TEST SET, AIRFIELD LIGHTING SYSTEMS, TYPE MM-1 |
| GG-R-1472 Revision B:1987 | RETAINER, MATRIX, DENTAL (TOFFLEMIRE) |
| GG-C-0048 Revision A:1967 | CABINET, TOOTH ASSORTMENT, COMPARTMENTED |
| MIL-B-36274 Revision A:1973 | BURNER, GAS LABORATORY, BUNSEN, AUTOMATIC |
| MIL-C-36346 Base Document:1964 | COMPARATOR, VISCOSITY OIL 200 2000 SAYBOLT SECONDS |
| MIL-T-11157 Revision B:1963 | THEODOLITE, DOUBLE CENTER ML-474/GM |
| UU-B-340 Revision A:1973 | BINDER, LOOSE LEAF, FLEXIBLE PRONG |
| MIL-P-14250 Revision C:1981 | PIN, STRAIGHT, HEADED AND PIN, STRAIGHT, HEADLESS, SLOTTED TEMPLET STUD |
| MIL-D-38024 Revision B:1965 | DROGUE, PARACHUTE STATIC LINE |
| MIL M 22661 : A NOTICE 1 | MOTOR AND TERMINALS ASSEMBLY |
| MIL M 43994 : C | MARKER, IDENTIFICATION, FIRE, CHEMICAL HAZARD, AND RESTRICTED AREA, REFLECTIVE |
| MIL-P-14313 Revision D:1972 | PISTOL AND REVOLVERS, PACKAGING OF |
| MIL-R-45306 Revision D:1991 | RADIATOR, ENGINE COOLING, INDUSTRIAL |
| MIL L 25866 : B | LIGHT, EMERGENCY EXIT, AIRCRAFT LEU AND 1-A |
| MIL-W-51255 Revision C:1981 | WINTERIZATION KIT, CHEMICAL BIOLOGICAL MASK, M4 |
| FF-T-1813 Base Document:1973 | TACK |
| MIL-C-11071 Revision D:1983 | CLEANING MACHINE, FUEL CAN, DRUM |
| GG-B-001275 Base Document:1967 | BURS, DENTAL, FINISHING |
| MIL-P-19152 Revision A:1974 | PACKINGS, HYDRAULIC, HIGH PRESSURE(FOR HYDROPNEUMATIC SYSTEMS) |
| MIL S 53012 : NOTICE 2 | SUSPENSION KIT, 6 INCH HOSELINE |
| MIL-J-12959 Revision E:1990 | JETTING SET, PORTABLE, FOR PILE-DRIVING OPERATION, PACKAGING OF |
| MIL-P-25515 Revision C:1968 | PLASTIC MATERIAL, PHENOLIC RESIN, GLASS FIBER BASE, LAMINATED |
| MIL-I-27667 Revision C:1990 | INDICATOR, TEMPERATURE, ELECTRICAL RESISTANCE, EHU-16/A MULTIFUNCTION -70 DEGREES TO +150 DEGREES C |
| MIL C 3650 : A | CONNECTOR, COAXIAL, RADIO FREQUENCY, SERIES LC |
| MIL-C-44009 Revision A:1982 | CHARGER, BATTERY, PP-7562/U |
| MIL B 29361 : 0 | BATTERY, STORAGE, SILVER ZINC, VENTED, GENERAL SPECIFICATION FOR |
| MIL-B-83183 Revision B:1987 | BARRIER, AIRCRAFT ARRESTING |
| GG-H-582 Base Document:1959 | HOLDER, PATIENT'S BED-TRAY CARD |
| MIL-L-40085 Revision F:1989 | LINK ASSEMBLY,TYPE IV, AIR DELIVERY |
| QQ-M-40 Revision B:1962 | MAGNESIUM ALLOY FORGINGS |
| QQ-C-523 Revision A Base Document:1955 | COPPER ALLOY INGOTS, BRASS (YELLOW, HIGH STRENGTH) MANGANESE AND MANGANESE ALUMINUM BRONZE (FOR REMELTING) |
| MIL R 25988 : B | RUBBER, FLUOROSILICONE ELASTOMER, OIL AND FUEL RESISTANT, SHEETS, STRIPS, MOLDED PARTS AND EXTRUDED SHAPES |
| MIL-D-6998 Revision D:1978 | DICHLOROMETHANE, TECHNICAL |
| GG B 120 : A NOTICE 1 | BASEPLATE, DENTAL |
| GG L 110 : NOTICE 1 | LANCET, FINGER BLEEDING |
| MIL P 4846 : C | POWER SUPPLY, SILICON RECTIFIER, 28V 300 AMP OUTPUT TYPE ME 1 |
| MIL-A-53099 Base Document:1990 | ARCTIC FORWARD AREA REFUELLING EQUIPMENT (AFARE) |
| PPP-C-1797 Revision A:1982 | CUSHIONING MATERIAL, RESILIENT, LOW DENSITY, UNICELLULAR POLYPROPYLENE FOAM |
| PPP-P-0015 Revision D:1970 | PACKAGING AND PACKING OF STORAGE CABINETS, WARDROBES AND CLOTHING LOCKERS, METAL |
| MIL-P-12808 Revision F:1991 | PLUMBING FIXTURES AND ACCESSORIES, PACKAGING OF |
| MIL-C-52370 Revision A:1978 | CASE, COMPUTER SUPPLIES, CARRYING |
| MIL B 131 : H | BARRIER MATERIAL, WATER VAPOR PROOF, GREASEPROOF, FLEXIBLE HEAT SEALABLE |
| MIL-L-51336 Base Document:1969 | LEAD OXIDE, RED, ANALYZED REAGENT |
| MIL-F-17057 Revision A:0196 | FELT SHEET, WOOL, COMPOUND IMPREGNATED, CHOCK PADDING |
| MIL-B-36772 Base Document:1972 | BOLT, TIBIAL |
| MIL-T-10629 Revision C:1978 | T-SQUARE [STEEL] |
| MIL-T-52877 Revision B:1980 | TRANSMISSION GROUP DATA: TRANSMITTER, DATA: T 1257/FSS 9(V) AND RECEIVER, DATA: R 1861/FSS 9(V) |
| MIL I 27190 : B | INDICATOR, PRESSURE AGU-3/A, HYDRAULIC, 0-4,000 PSI |
| MIL-T-49110 Base Document:1977 | TELEPHONE SET TA-838 ()/TT |
| MIL-T-49117 Base Document:1977 | TEST SET, RECEIVER TS-3565( )/TRS-2 |
| MIL-I-26299 Revision G:1990 | INDICATORS, RATE OF FLOW, 0-5,000 PPH, INTEGRALLY LIGHTED |
| MIL-G-52622 Revision B:1978 | GENERATOR SET, GASOLINE ENGINE TRAILER MOUNTED, 5KW 60 HERTZ PU-631/G |
| MIL-M-55554 Revision A:1969 | MODULE, IMAGE INTENSIFIER 25 MILLIMETER, TYPE 8585 |
| MIL K 20277 : H | KNIFE, COMBAT AND SHEATH |
| MIL M 50075 : A | METANIL YELLOW, REAGENT |
| MIL-C-49085 Base Document:1976 | CHARGER, BATTERY PP-7311/PAS-7 |
| DD-M-00200 Revision B:1970 | MEDICINE GLASS |
| MIL-H-36266 Revision A:1966 | HYDROMETER, GRADUATED SCALE API GRAVITY |
| MIL-A-7021 Revision C:1974 | ASBESTOS SHEET, COMPRESSED, FOR FUEL, LUBRICANT, COOLANT, WATER AND HIGH TEMPERATURE RESISTANT GASKETS |
| MIL-R-10882 Revision D:1969 | RECORDED, RADIOSONDE AN/TMQ-5 (UNITS OF) |
| MIL-T-5420 Revision B:1970 | TUBE, PITOT STATIC, ELECTRICALLY HEATED, AIRCRAFT |
| MIL-T-55369 Base Document:1972 | TEST SET, RADIO TS-1588 ( ) /AC |
| MIL-B-2424 Revision D:1983 | BLOCK AND TACKLE: WITH LOAD LOCKING DEVICE |
| MIL-H-81324 Base Document:1966 | HONING MACHINE, DRY PORTABLE |
| MIL T 44427 : 1991 | TENT, FIVE SOLDIER CREW |
| H-B-401 Revision C:1964 | BRUSHES, MUCILAGE AND PASTE |
| NNN-P-392 Base Document:1964 | PIPET VOLUMETRIC MICRO LONG AND LEVY DESIGN |
| MIL-F-49183 Base Document:1978 | FILTER, DIRECTOR CURRENT, POWER F 1461 ()/VCR |
| MIL-B-36410 Base Document:1965 | BOX, MICROSCOPE SLIDE CHIPBOARD, 20 SLIDE |
| K-B-1069 Revision A:1972 | BASKET, FRAME MOUNTED |
| L-T-776 Revision A:1966 | TRAY, SERVICE (LAMINATED FIBER GLASS, POLYESTER RESIN) |
| GG-P-725 Revision B:1978 | |
| MIL-M-36954 Revision C:1975 | MASK, SURGICAL, DISPOSABLE |
| MIL-P-43772 Revision A:1987 | PANEL TYPE II MODULAR PLATFORM, AIRDROP |
| T-C-2754 Base Document:1990 | CORD, POLYESTER, CORELESS |
| GG-B-140 Revision D:1986 | BATH, WATER, DENTAL IMPRESSION COMPOUND |
| GG-C-1282 Revision C:1985 | CURETTES, ALVEOLAR (MOLT AND MILLER) |
| MIL-V-36845 Base Document:1972 | VISCOSIMETER, SAYBOLT, WITHOUT VISCOSITY TUBES |
| KKK-L-370 Revision D:1988 | LINING, FRICTION, (CLUTCH AND BRAKE, METALLIC, METAL-CERAMIC AND SEMI-METALLIC) |
| MIL-G-36805 Base Document:1971 | GRADUATE, LIQUID, LABORATORY, POLYPROPYLENE |
| MIL-C-10244 Revision G:1970 | CRYPTOGRAPHIC EQUIPMENT DESTROYER, INCENDIARY, TH4, M2A1 |
| GG-P-001428 Revision A:1975 | PREVENTIVE DENTISTRY KIT, PATIENT |
| MIL B 83771 : A | BATTERY, REMOTELY ACTIVATED SUBMINIATURE RESERVE PRIMARY |
| MIL-I-22266 Revision C:1971 | INSULATING COMPOUND, ELECTRICAL (FOR FIELD SPLICING APPLICATIONS) |
| MIL-M-46985 Revision D:1969 | MINE, CHEMICAL AGENT, VX, M23; INERT COMPONENTS |
| MIL-G-16567 Revision D:1990 | GRIP, CABLE |
| MIL-M-0050079 Revision E:1968 | MASK, PROTECTIVE, FIELD ABC-M17 |
| MIL-T-37193 Base Document:1975 | TUBE, BIOLOGICAL CULTURE SAMPLING |
| MIL-P-20628 Revision B:1971 | PUTTY, SEALING (FOR BOLTED STEEL STORAGE TANKS) |
| MIL L 7830 : D | LIGHT ASSEMBLY, MARKER, AIRCRAFT OBSTRUCTION |
| L P 00525 : NOTICE 1 | PLASTIC STRIP, DENTAL MATRIX |
| MIL T 44036 : 0 | TIEDOWN ASSEMBLY, CARGO, AERIAL DELIVERY, LOAD BINDER TYPE |
| MIL-M-14274 Revision A:1975 | MULTIPLIER, ELECTRICAL INSTRUMENT TS-265/UP |
| MIL C 15345 : G | CASTING, NONFERROUS, CENTRIFUGAL |
| MIL-D-52838 Base Document:1974 | DIVING EQUIPMENT SETS, PACKAGING OF |
| PPP-P-1892 Base Document:1974 | PAINT, VARNISH, LACQUER AND RELATED MATERIALS, PACKAGING, PACKING, AND MARKING OF |
| MIL-F-10969 Revision B:1969 | FILTER ELEMENT, AEROSOL |
| MIL F 15160/28 : A NOTICE 1 | FUSE, STYLE F28 |
| MIL-C-36417 Base Document:1965 | CELL, SALINITY INDICATOR |
| GG-S-590 Revision B:1976 | SPATULA, DENTAL, CEMENT |
| NNN-F-001141 Base Document:1965 | FLASK, SAYBOLT, VISCOSITY |
| NNN-B-788 Revision A:0196 | BULB DROPPING PIPETTE |
| MIL C 25531 : D | COUPLING HALF, QUICK DISCONNECT, PNEUMATIC STARTER, EXTERNAL, LOW PRESSURE, DIRECT RELEASE |
| MIL-T-5955 Revision C:1970 | TRANSMISSION SYSTEM, VTOL-STOL GENERAL REQUIREMENTS FOR |
| GG-H-216 Revision C:1976 | HEMACYTOMETER SET |
| PPP-C-96 Revision E:1992 | CAN, METAL, 28 GAGE AND LIGHTER |
| MIL D 36471 : NOTICE 1 | DISK, COLOR STANDARD, ANTI ICING ADDITIVE |
| MIL-B-36964 Revision B:1973 | BLANKET, COMBAT, CASUALTY LIGHTWEIGHT, WATERPROOF, ALUMINIZED PLASTIC |
| MIL J 5513 : C | JOINT, HYDRAULIC SWIVEL |
| MIL-B-30510 Revision B:1983 | BLOCK AND TACKLE SET, LINEMAN'S, WITH SNUBBING HOOK |
| PPP P 001946 : NOTICE 1 | PACKAGING AND PACKING OF STEEL CREDENZA FURNITURE |
| MIL R 2765 : D | RUBBER SHEET, STRIP, EXTRUDED AND MOLDED SHAPES, SYNTHETIC, OIL RESISTANT |
| MIL-C-50709 Base Document:1971 | COPPER BASE SINTERED BARS (OIL PREGNATED) |
| MIL C 25955 : 0 | CONNECTOR, ELECTRICAL, ENVIRONMENT RESISTING MINIATURE, WITH SNAP-IN CONTACTS |
| MIL-B-52371 Revision A:1971 | BINOCULARS, ELECTRONIC AN/PAS-5 |
| MIL-M-18808 Base Document:1955 | MICROPHONE MARK 10 MOD 0 |
| MIL-T-4638 Revision B:1985 | TESTERS, MATERIAL HARDNESS (ROCKWELL TYPE) |
| GG-S-745 Revision A:1956 | STAPLERS AND STAPLES, PAPER FASTENING, OFFICE TYPE |
| MIL-B-8621 Revision A:1964 | BOARD, CHART, MARK 6A MARK 6B AND MARK 6C |
| MIL-S-3629 Revision F:1981 | STEREOSCOPES, LENS, AERIAL PHOTOGRAPH INTERPRETATION [POCKET] |
| MIL-W-1366 Revision F:1975 | WINDOWS, OPTICAL SENSOR |
| KKK-T-728 Revision A:1973 | TRUCK, HAND, TWO-WHEELED (LIGHT DUTY) 300 POUND CAPACITY |
| O-T-620 Revision C:1967 | TRICHLOROETHANE-1,1,1, TECHNICAL, INHIBITED (METHYL CHLOROFORM) |
| MIL-F-14136 Revision B:1959 | FILTER, BANDPASS (FILTER KITS MK&123) (TRC, MK&124) (/TRC, MK&228) (GRC AND MK&236)/GRC UNITS OF |
| MIL-R-52002 Revision A:1971 | RACK ASSEMBLY, CONE, AIRPORT MARKER LIGHT |
| MIL-G-5485 Revision D:1993 | GLASS; LAMINATED, FLAT, BULLET RESISTANT |
| MIL-S-1186 Revision B:1961 | SALINOMETER EQUIPMENT, EVAPORATOR, SHIPBOARD USE |
| MIL-T-37047 Revision A:1974 | TEST TUBE, 17 BY 100 MM., POLYPROPYLENE, DISPOSABLE, WITH SNAP-ON CAP |
| MIL V 8622 : B | VALVE, HIGH-PRESSURE, OXYGEN-CYLINDER AUTOMATIC OPENING |
| MIL-P-36728 Revision B:1976 | PAPER, FILTER AND LENS, 4X6 INCH 12S |
| MIL-F-3315 Revision B:1970 | FERRY CONVERSION SET, RAFT, PACKAGING OF |
| MIL-P-53125 Base Document:1992 | POWER PLANTS, ELECTRIC, DIESEL ENGINE, TRAILER MOUNTED, GENERAL SPECIFICATION FOR |
| MIL-B-82117 Revision D:1983 | BATTERY, STORAGE, SILVER-ZINC, RECHARGEABLE, GENERAL SPECIFICATION |
| MIL-Z-21353 Base Document:1959 | ZIRCONIUM HYDRIDE |
| GG-S-1344 Revision A:0197 | STERILIZER, ETHYLENE OXIDE GAS, FOR HEAT- AND MOISTURE-LABILE SURGICAL INSTRUMENTS AND SUPPLIES (NONPORTABLE) |
| KKK-A-2809 Base Document:1986 | AUGER, EARTH, TRUCK MOUNTED, 4 BY 4, DIESEL ENGINE DRIVEN, 28,000 LB MINIMUM GVW, WITH POLE SETTER AND WIRE REEL |
| MIL-P-52307 Revision B:1992 | PLOTTER, RECTANGULAR COORDINATES (COORDINATOGRAPH) |
| DD-D-431 Revision D:1977 | DISH, BIOLOGICAL STAINING, WITH TRAY |
| EE-M-101 Revision J:1979 | MATCHES, SAFETY AND MATCHES, NONSAFETY (STRIKE ANYWHERE) |
| MIL-R-36922 Base Document:1972 | RACK, TEST TUBE, LABORATORY, WASSERMAN |
| BB-F-1421 Revision B:1982 | FLUOROCARBON REFRIGERANTS |
| MIL-T-16315 Revision D:1994 | TRANSFORMER, POWER, STEP DOWN (MISCELLANEOUS, NAVAL SHIPBOARD USE) (NAVY) |
| MIL-L-5024 Revision A:1965 | LUBRICANT, INNER TUBE, AIRCRAFT TIRE |
| UU-P-680 Revision A:1964 | PORTFOLIO, DOUBLE-POCKET, PRESENTATION |
| MIL G 18498 : C | GLASS SET, WATER GAGE, FLAT, PLAIN. HIGH PRESSURE STEAM (GLASS, MICA SHIELD, SPACERS, & GASKETS) |
| FF-T-791 Revision B:1967 | TURNBUCKLE |
| GGG-D-777 Revision B:1966 | DRIVER, PROJECTILE UNIT, POWDER ACTUATED (HIGH VELOCITY) (ABOVE WATER ONLY); PIN, DRIVE, POWDER ACTUATED; AND CARTRIDGE, POWDER ACTUATED TOOL |
| MIL-G-18694 Revision A:1975 | GLYCERIN-WATER MIXTURES (FOR HYDRAULIC BUFFERS AND RECOILS) |
| MIL H 19253 : C NOTICE 1 | HOOD, HOIST |
| GGG-L-1763 Base Document:1974 | LABELING MACHINES |
| RR-P-586 Revision A:1958 | POT, MELTING, (NONELECTRIC, SOLDER STYLE) |
| MIL-C-3659 Revision A:1968 | CRUCIBLE, FILTERING, LABORATORY, GOOCH, LOW FORM, FRITTED 30 M1 |
| GG G 66 : B | GAGE, PRESSURE, DIAL INDICATING |
| DOD-G-51510 Base Document:1985 | GOGGLES, INDUSTRIAL, EYECUP AND LENSES, GOGGLES, INDUSTRIAL (METRIC) |
| MIL-C-538 Revision F:1975 | COMPARATOR, COLOR |
| L-P-389 Revision A:1964 | PLASTIC MOLDING MATERIAL, FEP FLUOROCARBON, MOLDING AND EXTRUSION |
| MIL-A-52839 Base Document:1975 | ALARM SET, ANTI-INTRUSION, RESTRICTED AREA: MINISID 3, AN/GSQ-154 |
| GG B 00511 : A | BURNER OUTFIT, GAS, DENTAL LABORATORY |
| MIL W 3717 : B | WEIGHT, SOUNDING |
| MIL-G-8170 Revision D:1987 | GAGE, OIL PRESSURE, DIRECT INDICATING, SINGLE CLAMP MOUNTED 0 -200 PSI 320 DEGREE SCALE 2 INCH SIZE, TYPE AGU 12/A AND AGU 13/A |
| MIL-B-22353 Revision D:1988 | BATCHING PLANT, AGGREGATE, (WHEEL-MOUNTED, 3O-TON CAPACITY) |
| MIL DTL 46709 : F | HOWITZER, MEDIUM, SELF-PROPELLED: 155-MM, M109A2, M109A3, M109A4, AND M109A5; PROCESSING FOR STORAGE AND SHIPMENT OF |
| MIL P 4879 : B NOTICE 1 | POWER SUPPLY METALLIC RECTIFIER 6-12 VOLT 500-250 AMPERE OUTPUT TYPE K AND 1 |
| MIL-G-52524 Revision C:1985 | GENERATOR SET, GASOLINE ENGINE, TRAILER MOUNTED 3KW 60 HERTZ PU-617/M' |
| DDD-G-148 Revision D:1964 | GAUZE, ABSORBENT, STERILE AND GAUZE, ABSORBENT, IODOFORM IMPREGNATED (PACKING STRIPS) |
| MIL-T-43694 Base Document:1970 | TIEDOWN ASSEMBLIES, FLOOR ANCHORING |
| MIL-D-52842 Revision A:1981 | DRIER, X-RAY, FILM FORCED AIR, WALL MOUNTED |
| MIL-I-24063 Revision B:1982 | Insert Sets, Sound Isolation for Risic RISIC-1 Flexible Connectors |
| MIL L 27546 : D | LINER, FLYER'S, JACKET AND LINER, FLYER'S, TROUSERS, CWU-9/P |
| MIL-P-52894 Revision B:1985 | POWER PLANT, ELECTRIC, DIESEL ENGINE, TRAILER MOUNTED 5 KW, 60 HERTZ, AN/MJQ-16 |
| MIL-P-710 Revision F:1990 | PUMP, DEEP WELL, PACKAGING OF |
| KKK-T-1725 Base Document:1972 | TRUCK, HAND, BOX AND TUB TYPE |
| GG-B-675 Revision E:1988 | BREATHING APPARATUS, SELF-CONTAINED |
| SAE MA 2151 : 2015 | CLAMP ASSEMBLIES, SADDLE OR OMEGA STYLE, TWO POINT MOUNT, MULTIPLE SHAPES, METRIC |
| MIL-H-639 Revision D:1986 | HOOK [FOR BELTS, STRAPS, AND EQUIPAGE ITEMS] |
| MIL R 3390 : F | RINGS, DEE |
| MIL-B-36170 Revision A:1970 | BRUSH, POLISHING, DENTAL HANDPIECE (RIGHT ANGLE) |
| MIL V 11201 : E | VALVE, SAFETY RELIEF, ANGLE, BRASS OR BRONZE, EXTRA-HEAVY, FOR GASOLINE SERVICE |
| MIL-C-53071 Base Document:1987 | COUPLING ASSEMBLIES, QUICK-DISCONNECT, SEXLESS TYPE |
| MIL-M-87029 Revision B:1985 | MITTENS, DIVERS FOR MK 12 SURFACE SUPPORTED DIVING SYSTEM |
| MIL-A-27391 Revision B:1963 | ALTIMETER, PRESSURE AAU-2A |
| HH-T-1782 Base Document:1973 | TAPE, ASBESTOS |
| MIL-R-55216 Base Document:1962 | RADIOSONDE TEST SET TS-1348 ( ) GMM-1 |
| DD-P-00100 Revision C:1970 | PAPERWEIGHT, GLASS |
| MIL O 23641 : NOTICE 1 | OUTLET, SHORE POWER |
| L-P-394 Revision B:1968 | PLASTIC MOLDING MATERIAL (PROPYLENE PLASTICS, INJECTION AND EXTRUSION) |
| GG-S-001634 Base Document:1970 | SCALERS, DENTAL, SINGLE-ENDED |
| MIL-C-58104 Revision A:1983 | COVER, PROTECTIVE FOR PARTS AND EQUIPMENT |
| SAE AS 13572 : 2014 | SPRINGS, HELICAL, COMPRESSION AND EXTENSION |
| SAE MA 2079 : 2015 | HOSE ASSEMBLY, CONVOLUTED POLYTETRAFLUOROETHYLENE, HIGH TEMPERATURE, MEDIUM PRESSURE, AIRCRAFT, METRIC |
| SAE AS 23899 : 2012 | AURAL PROTECTOR, SOUND |
| NAS1599:1980 | CONNECTORS, GENERAL PURPOSE, ELECTRICAL, MINIATURE CIRCULAR, ENVIRONMENT RESISTING, 200 DEG. C. MAXIMUM TEMPERATURE |
| SAE AMS HH G 101 : 2014 | GASKET, METALLIC-ENCASED |
| SAE AMS S 22141 : 1998 | STEEL, INVESTMENT CASTINGS - ALLOY AND CARBON |
| ASTM F 1348/F1348M : 1991 : R2013 | Standard Specification for Pneumatic Rotary Descaling Machines |
| ASTM F 1245 : 1989 : R2006 | Standard Specification for Faucets, Single and Double, Compression and Self-Closing Type, Shipboard |
| TT-W-572 Revision B:1969 | WOOD PRESERVATIVE: WATER-REPELLANT |
| MIL-STD-129 Revision R:2014 | Military Marking for Shipment and Storage |
| MIL-L-19140 Revision E:1984 | LUMBER & PLYWOOD, FIRE RETARDANT TREATED |
| FED-STD-123 Revision H:2007 | MARKING FOR SHIPMENT (CIVIL AGENCIES) |
| FF-N-105 Revision B:1971 | NAIL, BRADS, STAPLES AND SPIKES, WIRE, CUT AND WROUGHT |
| MIL-STD-105 Revision E:1989 | SAMPLING PROCEDURES AND TABLES FOR INSPECTION BY ATTRIBUTES |
US$20.00
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.