• SAE AMS 2241 : 2016

    Current The latest, up-to-date edition.
    Add to Watchlist
    This Standard has been added successfully to your Watchlist.
    Please visit My Watchlist to see all standards that you are watching.
    Please log in or to add this standard to your Watchlist.
    We could not add this standard to your Watchlist.
    Please retry or contact support for assistance.
    We could not add this standard to your Watchlist.
    Please retry or contact support for assistance.
    You have already added this standard to your Watchlist.
    Visit My Watchlist to view the full list.

    TOLERANCES, CORROSION AND HEAT-RESISTANT STEEL, IRON ALLOY, TITANIUM, AND TITANIUM ALLOY BARS AND WIRE

    Available format(s):  Hardcopy, PDF

    Language(s):  English

    Published date:  01-12-2016

    Publisher:  SAE International

    Add to Watchlist

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    1 SCOPE
    2 DIAMETER, THICKNESS, AND WIDTH
    3 LENGTH
    4 STRAIGHTNESS
    5 SPECIAL TOLERANCES
    6 NOTES

    Abstract - (Show below) - (Hide below)

    Specifies established manufacturing tolerances applicable to corrosion and heat-resistant steel, iron alloy, titanium, and titanium alloy bars and wire.

    General Product Information - (Show below) - (Hide below)

    Committee AMS F
    Development Note Supersedes SAE MAM 2241. (08/2007)
    Document Type Revision
    Publisher SAE International
    Status Current
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    SAE AMS 5899 : 2013 STEEL, CORROSION-RESISTANT, BARS, WIRE, AND FORGINGS, 17CR - 0.52MO (0.95 - 1.20C), POWDER METALLURGY PRODUCT, HOT ISOSTATICALLY PRESSED
    SAE AMS 5614 : 2013 STEEL, CORROSION AND HEAT RESISTANT, BARS, WIRE, AND FORGINGS 12CR - 0.50MO, ANNEALED
    SAE AMS 5651 : 2012 STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 25CR - 20NI (SAE 30310), SOLUTION HEAT TREATED
    SAE AMS 5697 : 2018 STEEL, CORROSION-RESISTANT, WIRE, 19CR - 9.5NI (304), SOLUTION HEAT TREATED
    SAE AMS 5925 : 2012 STEEL, CORROSION -RESISTANT, BARS, WIRE, AND FORGINGS, 15.5CR - 1.8MO - 0.20N (0.37 - 0.45C), ELECTROSLAG REMELTED
    SAE AS 5685 : 2015 STEEL, CORROSION RESISTANT, SAFETY WIRE, 18CR-11.5NI (UNS S30500), SOLUTION HEAT TREATED, COLD FINISHED
    SAE AMS 6935 : 2015 TITANIUM ALLOY BARS, FORGINGS AND FORGING STOCK, 6.0AL - 6.0V - 2.0SN, SOLUTION HEAT TREATED AND AGED
    MIL F 18280 : F FITTING, FLARELESS TUBE, FLUID CONNECTION
    SAE AMS 5744 : 2013 STEEL, CORROSION AND HEAT-RESISTANT, BARS AND FORGINGS, 15.5CR - 4.5NI - 2.9MO - 0.10N, HEAT TREATED, 170 KSI (1172 MPA) TENSILE STRENGTH
    SAE AMS 5738 : 2013 STEEL, CORROSION-RESISTANT, BARS AND WIRE, 18CR - 9NI (SAE 30303F), FREE MACHINING, HIGH YIELD STRENGTH, SOLUTION HEAT TREATED AND COLD WORKED
    SAE AMS 6950 : 2017 TITANIUM ALLOY BARS, FORGINGS, AND FORGING STOCK 4AL - 2.5V - 1.5 FE SINGLE HEARTH MELTED, ANNEALED
    SAE AMS 6901 : 2015 TITANIUM ALLOY BARS, FORGINGS, AND FORGING STOCK 5AL - 2.5SN, EXTRA LOW INTERSTITIAL ANNEALED
    MIL S 7720 : A STEEL, CORROSION RESISTANT [18.8] BARS, WIRE AND FORGING STOCK [AIRCRAFT QUALITY]
    SAE AMS 5895 : 2015 STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, CONSUMABLE ELECTRODE MELTED, 1750 DEGREES F (954 DEGREES C) SOLUTION HEAT TREATED, WELDING GRADE, PRECIPITATION HARDENABLE
    SAE AMS 6910 : 2015 TITANIUM ALLOY BARS, FORGINGS AND FORGING STOCK, 8AL - 1MO - 1V, DUPLEX ANNEALED
    SAE AMS 5627 : 2013 STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 17CR (SAE 51430), ANNEALED
    SAE AMS 5932 : 2012 STEEL, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS AND TUBING 14.5CR - 2.3NI - 12.5CO - 4.0MO - 0.60V - 0.03CB(NB), CARBURIZING, PREMIUM AIRCRAFT-QUALITY, DOUBLE VACUUM MELTED
    SAE AMS 5612 : 2012 STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 12CR, FERRITE CONTROLLED, ANNEALED
    MS 27769 : B PLUG, PIPE, COUNTERSUNK HEX HEAD
    SAE AMS 7718 : 2015 NICKEL-IRON ALLOY, MAGNETIC, BARS, RODS, TUBING, AND FORGINGS 50NI - 50FE
    SAE AMS 4982 : 2015 TITANIUM ALLOY WIRE, 44.5 CB
    SAE AMS 5636 : 2006 STEEL, CORROSION-RESISTANT, BARS AND WIRE, 18CR - 9.0NI (SAE 30302), SOLUTION HEAT TREATED AND COLD DRAWN, 100 KSI (689 MPA) TENSILE STRENGTH
    SAE AMS 5726 : 2015 STEEL, CORROSION AND HEAT-RESISTANT, BARS AND WIRE, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, 1800 DEGREES F (982 DEGREES C) SOLUTION HEAT TREATED AND WORK-STRENGTHENED, CONSUMABLE ELECTRODE REMELTED, 200 KSI (1379 MPA) TENSILE STRENGTH CAPABILITY
    SAE AMS 4928W : 2017 TITANIUM ALLOY BARS, WIRE, FORGINGS, RINGS, AND DRAWN SHAPES, 6AL - 4V, ANNEALED
    SAE AMS 6900 : 2015 TITANIUM ALLOY BARS, FORGINGS AND FORGING STOCK, 5AL - 2.5SN, ANNEALED
    SAE AMS 6907 : 2015 TITANIUM ALLOY BARS, FORGINGS AND FORGING STOCK, 6.0AL - 2.0SN - 4.0ZR - 6.0MO, DUPLEX ANNEALED
    SAE AMS 5737 : 2012 STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS AND TUBING, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, CONSUMABLE ELECTRODE MELTED, 1650 DEGREES F (899 DEGREES C), SOLUTION AND PRECIPITATION HEAT TREATED
    MS 27639 : B DISASSEMBLY TOOL
    SAE ARP 1942 : 2013 ACROSS HEX CORNER DIMENSIONS FOR FLUID FITTINGS AND NUTS
    SAE AMS 5652J : 2016 STEEL, CORROSION AND HEAT RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS 25CR - 20NI - 2.0SI (314) SOLUTION HEAT TREATED
    SAE AMS 5922 : 2015 STEEL, CORROSION-RESISTANT, BARS, AND FORGINGS, 10CR - 5.5NI - 14CO - 2MO - 1W (0.19-0.23C), VACUUM INDUCTION MELTED, VACUUM ARC REMELTED, NORMALIZED, ANNEALED
    SAE AMS 6932 : 2015 TITANIUM ALLOY BARS, FORGINGS AND FORGING STOCK, 6.0AL - 4.0V EXTRA LOW INTERSTITIAL, ANNEALED
    SAE AMS 6926 : 2015 TITANIUM ALLOY BARS, FORGINGS AND FORGING STOCK, 13V - 11CR - 3AL, SOLUTION HEAT TREATED AND AGED
    SAE AMS 4931 : 2015 TITANIUM ALLOY BARS, FORGINGS, AND RINGS, 6AL - 4V EXTRA LOW INTERSTITIAL (ELI), DUPLEX ANNEALED, FRACTURE TOUGHNESS
    SAE AMS 5639 : 2017 STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 19CR - 10NI, SOLUTION HEAT TREATED
    SAE AMS 4967 : 2014 TITANIUM ALLOY, BARS, WIRE, FORGINGS, AND RINGS 6.0AL - 4.0V ANNEALED, HEAT TREATABLE
    SAE AMS 4926 : 2015 TITANIUM ALLOY, BARS, WIRE, AND RINGS, 5AL - 2.5SN, ANNEALED, 110 KSI (758 MPA) YIELD STRENGTH
    SAE AMS 6930 : 2014 TITANIUM ALLOY BARS, FORGINGS AND FORGING STOCK, 6.0AL - 4.0V, SOLUTION HEAT TREATED AND AGED
    SAE AMS 6947 : 2015 TITANIUM ALLOY, BARS, WIRE, FORGINGS, RINGS, AND DRAWN SHAPES, 4AL - 2.5V -1.5 FE ANNEALED, HEAT TREATABLE
    SAE AMS 5642 : 2013 STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, AND FORGINGS, 18CR - 10.5NI - 0.60CB, FREE-MACHINING, SOLUTION HEAT TREATED
    SAE AMS 5935 : 2016 STEEL, CORROSION-RESISTANT, BARS, WIRE, AND FORGINGS, 12CR - 10NI - 2MO - 0.9AL - 0.3TI, VACUUM INDUCTION PLUS VACUUM CONSUMABLE ELECTRODE MELTED SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE
    SAE AMS 6936 : 2015 TITANIUM ALLOY BARS, FORGINGS AND FORGING STOCK, 6AL - 6V - 2SN, ANNEALED
    SAE AMS5659S : 2016 Steel, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions 15Cr - 4.5Ni - 0.30Cb (Nb) - 3.5Cu
    SAE AMS 5749 : 2014 STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, AND TUBING 14.5CR - 4.0MO - 1.2V (1.10-1.20C) PREMIUM QUALITY FOR BEARING APPLICATIONS, DOUBLE VACUUM MELTED
    SAE AMS 5930 : 2017 STEEL, CORROSION-RESISTANT, BARS AND FORGINGS 13.0CR - 2.5NI - 5.5CO - 2.0MO - 0.60V (0.05 - 0.09C) VACUUM INDUCTION PLUS VACUUM CONSUMABLE ELECTRODE MELTED
    MS 27626 : B NIPPLE, FLARED, TUBE TO HOSE-SWIVEL NUT
    SAE AMS5640V:2016 STEEL, CORROSION-RESISTANT, BARS, WIRE, AND FORGINGS, 18CR - 9.0NI, FREE MACHINING
    SAE AMS 6905 : 2014 TITANIUM ALLOY BARS, FORGINGS AND FORGING STOCK, 6.0AL - 2.0SN - 4.0ZR - 2.0MO, DUPLEX ANNEALED
    SAE AMS 4978 : 2018 TITANIUM ALLOY BARS, WIRE, FORGINGS, AND RINGS, 6AL - 6V - 2SN, ANNEALED
    SAE AMS 5923 : 2013 STEEL, CORROSION-RESISTANT, BARS, WIRE, AND FORGINGS,17CR - 0.52MO (0.95 - 1.20C) (SAE 51440C), FOR BEARING APPLICATIONS
    SAE AMS 4971L : 2017 TITANIUM ALLOY, BARS, WIRE, FORGINGS, AND RINGS, 6AL - 6V - 2SN, ANNEALED, HEAT TREATABLE
    SAE AMS 5689 : 2018 STEEL, CORROSION AND HEAT RESISTANT, WIRE 18CR - 10.5NI - 0.40TI (321) SOLUTION HEAT TREATED
    SAE AMS 5688 : 2012 STEEL, CORROSION-RESISTANT, WIRE, 18CR - 9.0NI (SAE 30302), SPRING TEMPER
    SAE AMS 4979J : 2017 TITANIUM ALLOY, BARS, WIRE, FORGINGS, AND RINGS, 6AL - 6V - 2SN, SOLUTION AND PRECIPITATION HEAT TREATED
    MIL F 5509 : D FITTING, FLARED TUBE, FLUID CONNECTION
    SAE AMS 5937 : 2012 STEEL, CORROSION-RESISTANT, BARS, WIRE, AND FORGINGS, 12CR - 11NI - 2MO - 1.5AL - 0.3TI, VACUUM INDUCTION PLUS VACUUM CONSUMABLE ELECTRODE MELTED, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE
    SAE AMS 5743 : 2014 STEEL, CORROSION AND HEAT-RESISTANT, BARS AND FORGINGS 15.5CR - 4.5NI - 2.9MO - 0.10N SOLUTION HEAT TREATED, SUB-ZERO COOLED, EQUALIZED, AND OVER-TEMPERED
    SAE AMS 5611 : 2013 STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 12CR, FERRITE CONTROLLED, CONSUMABLE ELECTRODE MELTED
    SAE AMS 5648 : 2016 STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 17CR - 12NI - 2.5MO (316), SOLUTION HEAT TREATED
    SAE AMS 5625 : 2018 STEEL BARS, HIGH EXPANSION, 9.5NI - 5.5MN (0.55 - 0.65C), COLD FINISHED
    MS 27638 : E MANDREL SLEEVE SETTING
    SAE AMS 4963 : 2016 TITANIUM ALLOY, BARS, WIRE, FORGINGS, AND RINGS, 6.0AL - 4.0V, ANNEALED, HEAT TREATABLE, MODIFIED STRENGTH
    SAE AMS 4970 : 2016 TITANIUM ALLOY BARS, WIRE, AND FORGINGS 7AL - 4MO SOLUTION AND PRECIPITATION HEAT TREATED
    SAE AMS 5746 : 2012 ALLOY, CORROSION AND HEAT RESISTANT, BARS AND FORGINGS - 15CR - 45NI - 4.1MO - 4.1W - 3.0TI - 1.0AL - 31FE (D979) CONSUMABLE ELECTRODE VACUUM MELTED, SOLUTION AND PRECIPITATION HEAT TREATED
    SAE AMS 5938 : 2011 STEEL, CORROSION-RESISTANT, BARS, WIRE, AND FORGINGS, 10CR - 12NI - 2MO - 1.45AL - 1.15TI, VACUUM INDUCTION PLUS VACUUM CONSUMABLE ELECTRODE MELTED, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE
    MS 27635 : C NIPPLE, FLARELESS, TUBE TO HOSE, SWIVEL NUT
    SAE AMS 5629H : 2016 STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, RINGS, AND EXTRUSIONS, 13CR - 8.0NI - 2.2MO - 1.1AL, VACUUM INDUCTION PLUS CONSUMABLE ELECTRODE MELTED, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE
    SAE AMS 5647 : 2017 STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 19CR - 9.5NI, SOLUTION HEAT TREATED
    SAE AMS 5898 : 2018 STEEL, CORROSION RESISTANT, BARS, WIRE, AND FORGINGS, 15.2CR - 1.0MO - 0.40N - (0.28 - 0.34C), CONSUMABLE ELECTRODE MELTED UNDER PRESSURE
    SAE AMS 5653 : 2012 STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 17CR - 12NI - 2.5MO (0.030 MAX C) (316L), SOLUTION HEAT TREATED
    MIL S 62471 : NOTICE 1 STEEL, STAINLESS, PRECIPITATION HARDENING (AM 355 (UNS S35500))
    SAE AMS 5623 D :1990(S2017) STEEL BARS AND FORGINGS, HIGH EXPANSION, 9.5NO - 5.5MN (0.55 - 0.65C) ANNEALED
    MS 27624 : B UNION, NIPPLE
    SAE AMS 5630 : 2013 STEEL, CORROSION-RESISTANT, BARS, WIRE, AND FORGINGS, 17CR - 0.52MO (0.95 - 1.20C) (440C)
    SAE AMS 4981 : 2017 TITANIUM ALLOY BARS, WIRE, AND FORGINGS, 6.0AL - 2.0SN - 4.0ZR - 6.0MO, SOLUTION AND PRECIPITATION HEAT TREATED
    SAE AMS 6906 : 2015 TITANIUM ALLOY BARS, FORGINGS, AND FORGING STOCK, 6.0AL - 2.0SN - 4.0ZR - 6.0MO, SOLUTION HEAT TREATED AND AGED
    SAE AMS 5732 : 2012 STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING AND RINGS, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, CONSUMABLE ELECTRODE MELTED 1800 DEGREES F (982 DEGREES C), SOLUTION AND PRECIPITATION HEAT TREATED
    SAE AMS 5853 : 2012 STEEL, CORROSION AND HEAT-RESISTANT, BARS AND WIRE, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, CONSUMABLE ELECTRODE MELTED 1800 DEGREES F (982 DEGREES C) SOLUTION TREATED AND WORK-STRENGTHENED, 160 KSI (1103 MPA) TENSILE STRENGTH
    SAE AMS 5731 : 2012 STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, CONSUMABLE ELECTRODE MELTED, 1800 DEGREES F (982 DEGREES C) SOLUTION HEAT TREATED
    SAE AMS 4965 : 2014 TITANIUM ALLOY, BARS, WIRE, FORGINGS, AND RINGS, 6.0AL 4.0V, SOLUTION HEAT TREATED AND AGED
    SAE AMS 5622 : 2013 STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 16CR - 4.0NI - 0.30CB - 4.0CU, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE, CONSUMABLE ELECTRODE REMELTED
    SAE AMS5624F:1989(S2017) Steel Bars, High Expansion 4.5Mn - 4.0Cr - 12.5Ni (0.50 - 0.60C) Cold Finished(STABILIZED Apr 2017)
    SAE AMS 5649 : 2012 STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, AND FORGINGS, 18CR - 13NI - 2.1MO, FREE MACHINING, SOLUTION HEAT TREATED
    SAE AMS 5773 : 2012 STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 15CR - 6.5NI - 0.75MO - 0.30 CB (NB) - 1.5CU, CONSUMABLE ELECTRODE REMELTED, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE
    SAE AMS 6925 : 2015 TITANIUM ALLOY BARS, FORGINGS AND FORGING STOCK, 13V - 11CR - 3AL, SOLUTION HEAT TREATED
    SAE AMS 5735 : 1974 STEEL BARS, FORGINGS, TUBING, AND RINGS, CORROSION AND HEAT RESISTANT, 15CR - 26NI - 1. 3MO - 2.1TI - 0.30V, 1800 DEGREES F (982.2 DEGREES C) SOLUTION AND PRECIPITATION HEAT TREATED
    SAE AMS 6948 : 2015 TITANIUM ALLOY BARS, WIRE, FORGINGS, RINGS, AND DRAWN SHAPES, 4AL - 2.5V -1.5 FE, ANNEALED
    SAE AMS 5934 : 2016 STEEL, EXTRA HIGH TOUGHNESS, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, RINGS, AND EXTRUSIONS, 13CR - 8.0NI - 2.2MO - 1.1AL, VACUUM INDUCTION PLUS CONSUMABLE ELECTRODE MELTED, SOLUTION HEAT TREATED, PRECIPITATION-HARDENABLE
    SAE AMS 5650 : 2018 STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 23CR - 13.5NI (309S), SOLUTION HEAT TREATED
    SAE AMS 5763E : 2016 STEEL, CORROSION RESISTANT BARS, FORGINGS, TUBING, AND RINGS, 15CR - 6.5NI - 0.75MO - 0.50CB (NB) - 1.5CU, SOLUTION HEAT TREATED
    SAE AMS 5656F : 2015 STEEL, CORROSION RESISTANT, BARS, WIRE, FORGINGS, EXTRUSIONS, AND RINGS, 9.0MN - 20CR - 6.5NI - 0.27N, SOLUTION HEAT TREATED
    SAE AMS 5655 : 2016 STEEL, CORROSION AND HEAT RESISTANT, BARS, WIRE, AND FORGINGS 12.5CR - 0.75NI - 1.0MO - 1.0W - 0.24V (0.20-0.25C) HARDENED AND TEMPERED
    SAE AMS 5764 : 2014 STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, EXTRUSIONS, AND RINGS 5.0MN - 22CR - 12.5NI - 2.2MO - 0.20CB - 0.30N - 0.20V SOLUTION HEAT TREATED
    SAE AMS 5674 : 2012 STEEL, CORROSION AND HEAT RESISTANT, WIRE 18CR - 11.5NI - 0.70 CB (SAE 30347) SOLUTION HEAT TREATED
    SAE AMS 4921 : 2016 TITANIUM BARS, WIRE, FORGINGS, AND RINGS COMMERCIALLY PURE, 70 KSI (483 MPA) YIELD STRENGTH
    SAE AMS 6915 : 2015 TITANIUM ALLOY BARS, FORGINGS AND FORGING STOCK, 7.0AL - 4.0MO, ANNEALED
    SAE AMS 5646 : 2014 STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 18CR - 11NI - 0.60CB(NB) (347), SOLUTION HEAT TREATED
    SAE AMS 4924 : 2015 TITANIUM ALLOY BARS, FORGINGS, AND RINGS-15, 5AL - 2.5SN, EXTRA LOW INTERSTITIAL, ANNEALED
    SAE AMS 4957 : 2016 TITANIUM ALLOY, ROUND BAR AND WIRE, 3AI - 8V - 6CR - 4MO - 4ZR, CONSUMABLE ELECTRODE MELTED, SOLUTION HEAT TREATED AND COLD DRAWN
    SAE AMS 5616 : 2014 STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS 13CR - 2.0NI - 3.0W ANNEALED
    SAE AMS 4930 : 2015 TITANIUM ALLOY BARS, WIRE, FORGINGS, AND RINGS, 6AL - 4V, EXTRA LOW INTERSTITIAL, ANNEALED
    SAE AMS 5690 : 2015 STEEL, CORROSION AND HEAT RESISTANT, WIRE, 17CR - 12NI - 2.5MO (316), SOLUTION HEAT TREATED
    SAE AMS 5637 : 2012 STEEL, CORROSION RESISTANT, BARS AND WIRE 18CR - 9.0NI (SAE 30302) SOLUTION HEAT TREATED, COLD DRAWN AND STRESS RELIEVED 125 KSI (862 MPA) TENSILE STRENGTH
    SAE AMS 5632 : 2018 STEEL, CORROSION-RESISTANT, BARS, WIRE, AND FORGINGS, 17CR - 0.50MO (0.95 - 1.20C) (440F), FREE-MACHINING, ANNEALED
    SAE AMS 4972 : 2015 TITANIUM ALLOY BARS, WIRE, AND RINGS, 8AL - 1MO - 1V, SOLUTION HEAT TREATED AND STABILIZED
    SAE AMS 5635 : 2018 STEEL, CORROSION-RESISTANT, BARS, WIRE, AND FORGINGS, 18CR - 9NI - 0.21PB (303PB), FREE-MACHINING, SOLUTION HEAT TREATED
    SAE AMS 5678 : 2013 STEEL, CORROSION RESISTANT, WIRE, 17CR - 7.1NI - 1.1AL, COLD DRAWN, PRECIPITATION-HARDENABLE
    SAE AMS 5641 : 2016 STEEL, CORROSION-RESISTANT, BARS, WIRE, AND FORGINGS, 18.5CR - 10NI - 0.22SE (303SE), FREE-MACHINING; SWAGING OR UPSETTING SOLUTION HEAT TREATED
    SAE AMS 5857 : 2013 STEEL, CORROSION-RESISTANT, BARS AND WIRE, 19CR - 10NI (304), HIGH YIELD STRENGTH, SOLUTION HEAT TREATED AND COLD WORKED
    SAE AMS 4950 : 2015 TITANIUM ALLOY, BARS, WIRE, FORGINGS, AND RINGS, 6.0AL - 4.0V, SOLUTION HEAT TREATED AND AGED, MODIFIED STRENGTH
    SAE AMS 5717 : 2014 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS 45.5NI - 25.5CR - 3.2CO - 3.2MO - 3.2W - 18.5FE SOLUTION HEAT TREATED
    SAE AMS 5638 : 2015 STEEL, CORROSION-RESISTANT, BARS AND FORGINGS, 0.14S - 18CR - 9.5NI - 0.50MO - 0.80AL (303MA), FREE-MACHINING; SWAGING OR UPSETTING, SOLUTION HEAT TREATED
    SAE AMS 5918 : 2011 COBALT ALLOY, CORROSION AND HEAT RESISTANT, BARS, 62CO - 28CR - 6MO, WARM-WORKED
    SAE AMS 6921 : 2015 TITANIUM ALLOY BARS, FORGINGS AND FORGING STOCK, 3AL - 8V - 6CR - 4MO - 4ZR, SOLUTION HEAT TREATED AND AGED
    SAE AMS 5926 : 2016 STEEL, CORROSION-RESISTANT, BARS, WIRE, TUBING, AND FORGINGS 15.5CR - 1.5SI - 0.3MO - 0.1N (0.45 - 0.60C) FOR BEARING APPLICATIONS
    SAE AMS 5700G : 2018 STEEL, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 13.5CR - 13.5NI - 0.35MO - 2.2W, ANNEALED
    SAE AMS 5762 : 2016 STEEL, CORROSION RESISTANT, BARS, WIRE, AND FORGINGS, 5.8MN - 17CR - 5.8NI - 2.0CU - 0.26S, FREE MACHINING, SOLUTION HEAT TREATED
    SAE AMS 5745 : 2014 STEEL, CORROSION AND HEAT-RESISTANT, BARS AND FORGINGS 16.5CR - 4.5NI - 2.9MO - 0.10N EQUALIZED AND OVER-TEMPERED
    SAE AMS 5734 : 2012 STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, AND TUBING, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, CONSUMABLE ELECTRODE MELTED, 1650 DEGREES F (899 DEGREES C) SOLUTION HEAT TREATED
    SAE AMS 5631 : 2018 STEEL, CORROSION-RESISTANT, BARS AND FORGINGS, 17CR (0.60 - 0.75C) (440A)
    SAE AMS 5621 : 2015 STEEL, CORROSION RESISTANT, BARS, WIRE, AND FORGINGS, 13CR (0.30-0.40C) (51420), ANNEALED
    SAE AS 1182 : 2012 STANDARD STOCK REMOVAL ALLOWANCE AIRCRAFT-QUALITY AND PREMIUM AIRCRAFT-QUALITY STEEL BARS AND MECHANICAL TUBING
    SAE AMS 4959 : 2017 TITANIUM ALLOY WIRE 13.5V - 11CR - 3AL SPRING TEMPER
    SAE AMS 5718E : 2016 STEEL, BARS, FORGINGS, TUBING, AND RINGS, CORROSION RESISTANT, 11.8CR - 2.5NI - 1.8MO - 0.33V (0.08 - 0.15C), ANNEALED
    SAE AMS 5686 : 2012 STEEL, CORROSION RESISTANT, RIVET WIRE, 18CR - 11.5NI (SAE 30305), SOLUTION HEAT TREATED
    SAE AMS 5613 : 2013 STEEL, CORROSION AND HEAT RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS 12.5CR (SAE 51410) ANNEALED
    SAE AMS 5955 : 2016 STEEL, CORROSION-RESISTANT, BARS, WIRE, AND FORGINGS 10CR - 12NI - 2MO - 1.45AL - 1.15TI VACUUM INDUCTION PLUS VACUUM CONSUMABLE ELECTRODE MELTED SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE
    SAE AMS 5933 : 1999 STEEL, CORROSION RESISTANT BARS AND FORGINGS, 12.5CR - 1.0NI - 15.5CO - 2.0MO, VACUUM INDUCTION PLUS, VACUUM CONSUMABLE ELECTRODE REMELTED
    SAE AMS 5929 : 2014 STEEL, CORROSION-RESISTANT, BARS AND FORGINGS, 11.5CR -10NI - 1.0AL - 0.5TI - 1.0CU - 1.0W, VACUUM INDUCTION PLUS VACUUM CONSUMABLE ELECTRODE MELTED SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE
    SAE AMS 5628 : 2015 STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, AND TUBING, 16CR - 2.5NI (SAE 51431)
    SAE AMS 6920 : 2015 TITANIUM ALLOY BARS, FORGINGS AND FORGING STOCK, 3AL - 8V - 6CR - 4MO - 4ZR, SOLUTION HEAT TREATED
    SAE AMS 6931 : 2017 TITANIUM ALLOY BARS, FORGINGS AND FORGING STOCK, 6.0AL - 4.0V, ANNEALED
    SAE AMS 5719 : 2012 STEEL BARS, WIRE, FORGINGS, TUBING, RINGS, AND EXTRUSIONS, CORROSION-RESISTANT, 11.8CR - 2.5NI - 1.8MO - 0.33V (0.08 - 0.15C), ANNEALED, VACUUM ARC OR ELECTROSLAG REMELTED
    SAE AMS 4975 : 2017 TITANIUM ALLOY, BARS, WIRE, AND RINGS, 6.0AL - 2.0SN - 4.0ZR - 2.0MO - 0.08SI, SOLUTION AND PRECIPITATION HEAT TREATED
    SAE AMS 5643/H1025 : 2014 STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, TUBING AND RINGS, 16CR - 4.0NI - 0.30CB (NB) - 4.0CU, SOLUTION AND PRECIPITATION HEAT TREATED (H1025)
    SAE AMS 5643 : 2018 STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 16CR - 4.0NI - 0.30CB (NB) - 4.0CU, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE
    SAE AMS 5900 : 2000 STEEL BARS, FORGINGS, AND TUBING, CORROSION RESISTANT, 14CR - 2.1MO - 0.30CB - 1.0V (1.05 - 1.15C), PREMIUM AIRCRAFT QUALITY FOR BEARING APPLICATIONS, DOUBLE VACUUM MELTED
    SAE AMS 5645 : 2016 STEEL, CORROSION AND HEAT RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 18CR - 10NI - 0.40TI (321), SOLUTION HEAT TREATED
    SAE AMS 5618 : 2017 STEEL, CORROSION-RESISTANT, BARS, WIRE, AND FORGINGS, 17CR - 0.52MO (0.95 - 1.20C) (440C), CONSUMABLE ELECTRODE VACUUM MELTED
    SAE AMS 5716 : 2016 IRON-NICKEL ALLOY, HEAT RESISTANT, BARS, WIRE, FORGINGS, AND RINGS, 44FE - 18.5CR - 35.5NI - 1.1SI, SOLUTION HEAT TREATED
    SAE AMS 5931 : 2012 STEEL, BARS, WIRE, FORGINGS, EXTRUSIONS, TUBING, AND RINGS WEAR, GALLING, AND CORROSION RESISTANT - 5.0MN - 3.5SI - 16.5CR - 5.0NI - 0.14N - SOLUTION HEAT TREATED
    SAE AMS 5620 : 2012 STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, AND FORGINGS, 13CR (0.30 - 0.40C) (SAE 51420F, 51420FSE), FREE-MACHINING GRADE
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective