SAE AS 5272 : 2016

Current

Current The latest, up-to-date edition.

LUBRICANT, SOLID FILM, HEAT CURED, CORROSION INHIBITING, PROCUREMENT SPECIFICATION

Publisher: SAE International

Published: 04-10-2016

Available Formats: PDF - English, Hardcopy - English
More Info on product formats

Table of Contents - (Show below) - (Hide below)

1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. QUALITY ASSURANCE PROVISIONS
5. PREPARATION FOR DELIVERY
6. USE LIMITATIONS
7. ACKNOWLEDGMENT
8. REJECTIONS
9. NOTES

Abstract - (Show below) - (Hide below)

Specifies the requirements for heat cured solid film lubricants.

General Product Information - (Show below) - (Hide below)

Published
Document Type	Standard
Status	Current
Publisher	SAE International
Pages
ISBN
Committee	E-25
Supersedes	SAE AS 5272 : 2011

Standards Referenced By This Book - (Show below) - (Hide below)

ASME B18.29.1 : 2010	HELICAL COIL SCREW THREAD INSERTS - FREE RUNNING AND SCREW LOCKING (INCH SERIES)
SAE AS 4468 G : 2017	HOSE ASSEMBLY, 125 PSI, LINED SILICONE, POTABLE WATER, PROCUREMENT SPECIFICATION
MS 27082 : E	ELBOW, NIPPLE END, SWIVEL FLANGE TO HOSE - 90 DEGREES
MS 27064 : E	ELBOW SUBASSEMBLY, SWIVEL FLANGE, 45 DEGREES
SAE ARP 5824 : 2013	RECOMMENDED SOLID FILM LUBRICANTS FOR FLUID SYSTEM COMPONENTS
15/30329889 DC : 0	BS A 266 TO 271 - BOLT, 100 DEGREES COUNTERSUNK HEAD, HI-TORQUE SPEED DRIVE RECESS, UNJF THREAD, SPLIT PIN HOLE OPTION, TITANIUM ALLOY, VARIOUS FINISHES, CLASSIFICATION: 80 TF/IN[2] (1100 MPA) AT TA/+315 DEGREES C
MS 27075 : D	NIPPLE, FLARED, TUBE TO HOSE - SWIVEL NUT
MS 27071 : D	UNION, NIPPLE
MS 27625 : D	WIRE, RETAINER
MS 27070 : E	SLEEVE, HOSE COUPLING
MS 27068 : D	ELBOW SUBASSEMBLY, FLARED, 90 DEGREES FORGED, SWIVEL NUT
MS 27390 : C	ELBOW SUB ASSEMBLY, FLARELESS, 90 DEGREES, FORGED, SWIVEL NUT
I.S. EN 6129:2016	AEROSPACE SERIES - BLIND BOLT, PROTRUDING HEAD, HIGH STRENGTH, PULLTYPE
MS 27055 : E	ADAPTER ASSEMBLY, FLARED, 45 DEGREES ELBOW, TUBE TO HOSE - WITH SWIVEL NUT
MS 27058 : E	ADAPTER ASSEMBLY, 90 DEGREES ELBOW, SWIVEL FLANGE TO HOSE
MS 27061 : D	NIPPLE SUBASSEMBLY, FLARED, STRAIGHT - WITH SWIVEL NUT
ASME B18.29.1 : 2010	HELICAL COIL SCREW THREAD INSERTS - FREE RUNNING AND SCREW LOCKING (INCH SERIES)
MS 27072 : F	WIRE, RETAINER
ASTM D 7217 : 2016 : REDLINE	Standard Test Method for Determining Extreme Pressure Properties of Solid Bonded Films Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
MS 27086 : D	ELBOW, NIPPLE END, FLARED, TUBE TO HOSE - 90 DEGREE SWIVEL NUT
MS 27060 : E	ADAPTER ASSEMBLY, FLARED, 90 DEGREE FORGED ELBOW, TUBE TO HOSE - WITH SWIVEL NUT
MS 27087 : D	ELBOW, NIPPLE END, FLARED, TUBE TO HOSE - 45 DEGREE SWIVEL NUT
SAE AS 5960 : 2013	HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METALLIC BRAID REINFORCED, 5080 PSI (35000 KPA), 400 DEGREES F (204 DEGREES C), AIRCRAFT HYDRAULIC SYSTEMS
MS 27066 : F	ELBOW SUBASSEMBLY, SWIVEL FLANGE, 90 DEGREES
MS 27388 : D	ELBOW SUBASSEMBLY, FLARELESS, 90 DEGREES, SWIVEL NUT
ASME B18.29.1 : 2010 : R2017	Helical Coil Screw Thread Inserts--Free Running and Screw Locking (Inch Series) (B18.29.1 - 2010)
MIL L 0046010 : D	LUBRICANT, SOLID FILM, HEAT CURED, CORROSION INHIBITING
MS 27626 : B	NIPPLE, FLARED, TUBE TO HOSE-SWIVEL NUT
MS 27056 : E	ADAPTER ASSEMBLY, 45 DEGREES ELBOW, SWIVEL FLANGE TO HOSE
ASME B18.29.2M : 2005	HELICAL COIL SCREW THREAD INSERTS: FREE RUNNING AND SCREW LOCKING (METRIC SERIES)
14/30310862 DC : 0	BS EN 4832 - AEROSPACE SERIES - ADAPTOR, PIPE COUPLING 24 DEGREES CONE UP TO 35000 KPA (5080 PSI) RING-LOCKED FITTING AND RING-LOCKED FITTING-REDUCER - INCH SERIES - TECHNICAL SPECIFICATION
MS 27389 : D	ELBOW SUB ASSEMBLY, FLARELESS, 45 DEGREES FORGED, SWIVEL NUT
SAE AS 85720 : 2018	FITTINGS, TUBE, FLUID SYSTEMS, SEPARABLE, HIGH PRESSURE BEAM SEAL, 5000/8000 PSI, GENERAL SPECIFICATION FOR
MS 27386 : C	NIPPLE SUB ASSEMBLY, FLARELESS, STRAIGHT - WITH SWIVEL NUT
MS 27054 : E	ADAPTER ASSEMBLY, STRAIGHT, SWIVEL FLANGE TO HOSE
SAE AS 5528 : 2016	LUBRICANT APPLICATION, SOLID FILM, HEAT CURED, CORROSION INHIBITING
MS 27065 : F	ELBOW SUBASSEMBLY, FLARED, 90 DEGREES, SWIVEL NUT
MS 27062 : D	NIPPLE SUBASSEMBLY, STRAIGHT, SWIVEL FLANGE
SAE AS 5951 : 2017	HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PARA-ARAMID REINFORCED, 5080 PSI (35,000 KPA), 275 DEGREES F (135 DEGREES C), AIRCRAFT HYDRAULIC SYSTEMS
MS 27067 : D	ELBOW SUBASSEMBLY, FLARED, 45 DEGREES FORGED, SWIVEL NUT
ASME B18.29.2M : 2005	HELICAL COIL SCREW THREAD INSERTS: FREE RUNNING AND SCREW LOCKING (METRIC SERIES)
MS 27069 : H	SOCKET, HOSE COUPLING
MS 27059 : E	ADAPTER ASSEMBLY, FLARED, 45 DEGREES FORGED ELBOW, TUBE TO HOSE - WITH SWIVEL NUT
MS 27063 : F	ELBOW SUBASSEMBLY, FLARED, 45 DEGREES, SWIVEL NUT
SAE J 2270 : 2016	SHIP SYSTEMS AND EQUIPMENT - THREADED FASTENERS - INSPECTION, TEST, AND INSTALLATION GUIDANCE
MS 27635 : C	NIPPLE, FLARELESS, TUBE TO HOSE, SWIVEL NUT
MS 27076 : E	NIPPLE, STRAIGHT, SWIVEL FLANGE
PREN 6122 : 200P1	AEROSPACE SERIES - BLIND BOLT, 130 DEGREES FLUSH HEAD, HIGH STRENGTH, PREFERABLE IN COMPOSITE APPLICATION
MS 27395 : D	ELBOW, FLARELESS, TUBE TO HOSE - 45 DEGREES SWIVEL NUT
MS 27084 : D	ELBOW, NIPPLE END, SWIVEL FLANGE TO HOSE - 45 DEGREES
MS 27623 : D	SLEEVE, HOSE COUPLING
MS 27053 : E	ADAPTER ASSEMBLY, FLARED, STRAIGHT, TUBE TO HOSE - WITH SWIVEL NUT
SAE AS 5000 : 2010	FITTING, PLUG-IN UNION, RING LOCKED, 24 DEGREE CONE, FLUID CONNECTION, 5080 PSI (35000 KPA), SPECIFICATION FOR
MS 27394 : C	ELBOW, FLARELESS, TUBE TO HOSE - 90 DEGREE SWIVEL NUT
MS 27624 : B	UNION, NIPPLE
SAE AS 6449 : 2017	SOLID FILM LUBRICANT
MS 27387 : D	ELBOW SUB ASSEMBLY, FLARELESS, 45 DEGREES, SWIVEL NUT
ASME B18.29.2M : 2005 : R2017	HELICAL COIL SCREW THREAD INSERTS: FREE RUNNING AND SCREW LOCKING (METRIC SERIES)
BS 2A 266 to 2A 271:2016+A1:2019	AEROSPACE SERIES - BOLT, 100 DEGREES COUNTERSUNK HEAD, HI-TORQUE SPEED DRIVE RECESS, UNJF THREAD, SPLIT PIN HOLE OPTION, TITANIUM ALLOY, VARIOUS FINISHES, CLASSIFICATION: 80 TF/IN[2] (1100 MPA) AT T[A]/+315 DEGREES C
SAE AS 4623 : 2016	HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PARA-ARAMID REINFORCED, 3,000 PSI, 275 DEGREES F, HEAVY DUTY, AIRCRAFT HYDRAULIC SYSTEMS
SAE AMS 2487 : 2018	ANODIC TREATMENT OF TITANIUM AND TITANIUM ALLOYS SOLUTION PH 12.4 MAXIMUM
SAE ARP 4058 : 2017	GENERAL SPECIFICATION GUIDE FOR MECHANICAL GEARED ROTARY ACTUATORS
I.S. EN 6128:2017	AEROSPACE SERIES - BLIND BOLT, 100 DEGREE FLUSH HEAD, HIGH STRENGTH
SAE AS 18280 : 2017	FITTINGS, 24 DEGREES CONE FLARELESS, FLUID CONNECTION, 3000 PSI
SAE AS 12500 : 2018	CORROSION PREVENTION AND DETERIORATION CONTROL IN ELECTRONIC COMPONENTS AND ASSEMBLIES
MS 27057 : E	ADAPTER ASSEMBLY, FLARED, 90 DEGREES ELBOW, TUBE TO HOSE - WITH SWIVEL NUT
SAE AS 1975 : 2016	HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PARA-ARAMID REINFORCED, 3000/4000 PSI, 275 DEGREES F, STANDARD DUTY, HYDRAULIC, AIRCRAFT SYSTEMS
SAE AS 5420 : 2017	HOSE ASSEMBLY, HEATED, 125 PSIG, LINED SILICONE, POTABLE WATER, PROCUREMENT SPECIFICATION
EN 6128 : 2017	AEROSPACE SERIES - BLIND BOLT, 100 DEGREE FLUSH HEAD, HIGH STRENGTH
BS EN 6128 : 2017	AEROSPACE SERIES - BLIND BOLT, 100 DEGREE FLUSH HEAD, HIGH STRENGTH
BS EN 6129 : 2016	AEROSPACE SERIES - BLIND BOLT, PROTRUDING HEAD, HIGH STRENGTH, PULLTYPE
NASA PRC 8001 : 2013	PROCESS SPECIFICATION FOR DRY-FILM LUBRICANT APPLICATION

Standards Referencing This Book - (Show below) - (Hide below)

SAE AS 1701 : 2017	LUBRICANT, SOLID FILM
ISO/IEC 17025 : 2005	GENERAL REQUIREMENTS FOR THE COMPETENCE OF TESTING AND CALIBRATION LABORATORIES
NAS 850 : 0	GENERAL PACKAGING STANDARD
SAE AMS 1424 : 2016	FLUID, AIRCRAFT DEICING/ANTI-ICING, SAE TYPE 1
SAE AS 5528 : 2016	LUBRICANT APPLICATION, SOLID FILM, HEAT CURED, CORROSION INHIBITING
ASTM A 108 : 2013-08	SPECIFICATION FOR STEEL BAR, CARBON AND ALLOY, COLD-FINISHED
MIL PRF 372 : E	CLEANING COMPOUND, SOLVENT (FOR BORE OF WEAPONS)
ASTM D 1400 : 2000	TEST METHOD FOR NONDESTRUCTIVE MEASUREMENT OF DRY FILM THICKNESS OF NONCONDUCTIVE COATINGS APPLIED TO A NONFERROUS METAL BASE
MIL PRF 63460 : F	CLEANER, LUBRICANT, AND PRESERVATIVE FOR WEAPONS AND WEAPONS SYSTEMS
ASTM D 1141 : 1998 : EDT 1	Standard Practice for the Preparation of Substitute Ocean Water
MIL DTL 16232 : G	PHOSPHATE COATING, HEAVY, MANGANESE OR ZINC BASE
ASTM D 2832 : 1992	GUIDE FOR DETERMINING VOLATILE AND NONVOLATILE CONTENT OF PAINT AND RELATED COATINGS
ASTM D 3960 : 2005	Standard Practice for Determining Volatile Organic Compound (VOC) Content of Paints and Related Coatings
MIL C 81302 : D	CLEANING COMPOUND, SOLVENT, TRICHLOROTRIFLUOROETHANE
ASTM D 1193:2006	SPECIFICATION FOR REAGENT WATER
MIL L 46000 : C	LUBRICANT, SEMI-FLUID (AUTOMATIC WEAPONS)
ASTM D 2510 : 1994	TEST METHOD FOR ADHESION OF SOLID FILM LUBRICANTS
ASTM F 22 : 2013 : REDLINE	Standard Test Method for Hydrophobic Surface Films by the Water-Break Test
SAE AS 9100D : 2016	QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS FOR AVIATION, SPACE AND DEFENSE ORGANIZATIONS
ASTM A 167 : 1999	SPECIFICATION FOR STAINLESS AND HEAT-RESISTING CHROMIUM-NICKEL STEEL PLATE, SHEET, AND STRIP
ASTM D 56 : 2016-07	TEST METHOD FOR FLASH POINT BY TAG CLOSED CUP TESTER
ASTM D 4457 :	TEST METHOD FOR DETERMINATION OF DICHLOROMETHANE AND 1,1,1-TRICHLOROETHANE IN PAINTS AND COATINGS BY DIRECT INJECTION INTO A GAS CHROMATOGRAPH
ASTM D 2625 : 1994	TEST METHOD FOR ENDURANCE (WEAR) LIFE AND LOAD-CARRYING CAPACITY OF SOLID FILM LUBRICANTS (FALEX PIN AND VEE METHOD)
ASTM B244 : 2009	TEST METHOD FOR MEASUREMENT OF THICKNESS OF ANODIC COATINGS ON ALUMINUM AND OF OTHER NONCONDUCTIVE COATINGS ON NONMAGNETIC BASIS METALS WITH EDDY-CURRENT INSTRUMENTS
ASTM B 499 : 2009	TEST METHOD FOR MEASUREMENT OF COATING THICKNESSES BY THE MAGNETIC METHOD: NONMAGNETIC COATINGS ON MAGNETIC BASIS METALS
ASTM D 2649 : 2004	TEST METHOD FOR CORROSION CHARACTERISTICS OF SOLID FILM LUBRICANTS
ASTM D 3735 : 2007	SPECIFICATION FOR VM&P NAPHTHAS
VV D 1078 : B	DAMPING FLUID, SILICONE BASE (DIMETHYL POLYSILOXANE)
MIL PRF 23699 : G	LUBRICATING OIL, AIRCRAFT TURBINE ENGINE, SYNTHETIC BASE, NATO CODE NUMBERS: O-152, O-154, O-156, AND O-167
SAE AMS QQ A 250/5 : 2014	ALUMINUM ALLOY ALCLAD 2024, PLATE AND SHEET
CFR 29(PT1910.1000 TO END) : 0	LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR
MIL A 8625 : F	ANODIC COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS
ASTM D 1186 : 2001	TEST METHODS FOR NONDESTRUCTIVE MEASUREMENT OF DRY FILM THICKNESS OF NONMAGNETIC COATINGS APPLIED TO A FERROUS BASE
MIL DTL 83133 : J	TURBINE FUEL, AVIATION, KEROSENE TYPE, JP-8 (NATO F-34), NATO F-35, AND JP-8+100 (NATO F-37)
ASTM D 2511 : 1993	TEST METHOD FOR THERMAL SHOCK SENSITIVITY OF SOLID FILM LUBRICANTS
NAS 854 : 0	HAZARDOUS MATERIAL PACKAGING STANDARD PACKAGING AND SAFETY DATA SHEET NAS854 PREPARATION
MIL PRF 83282 : D	HYDRAULIC FLUID, FIRE RESISTANT, SYNTHETIC HYDROCARBON BASE, METRIC, NATO CODE NUMBER H-537
ASTM E 1252 : 1998	PRACTICE FOR GENERAL TECHNIQUES FOR OBTAINING INFRARED SPECTRA FOR QUALITATIVE ANALYSIS
SAE AMS 2825 : 1987	MATERIAL SAFETY DATA SHEETS
FED STD 791 : D	TESTING METHOD OF LUBRICANTS, LIQUID FUELS, AND RELATED PRODUCTS
ASTM D4017 : 2002	TEST METHOD FOR WATER IN PAINTS AND PAINT MATERIALS BY KARL FISCHER METHOD
FED STD 595 : C	COLORS USED IN GOVERNMENT PROCUREMENT
MIL PRF 14107 : D	LUBRICATING OIL, WEAPONS, LOW TEMPERATURE
MIL PRF 46010 : H	LUBRICANT, SOLID FILM, HEAT CURED, CORROSION INHIBITING NATO CODE S-1738
ASTM B 117 : 2016-04	PRACTICE FOR OPERATING SALT SPRAY (FOG) APPARATUS
MIL T 81533 : A	TRICHLOROETHANE, 1, 1, 1, (METHYL CHLOROFORM) INHIBITED, VAPOR DEGREASING

Add To Cart

Product Format

Quantity

add to cart

SAE AS 5272 : 2016

Table of Contents - (Show below) - (Hide below)

Abstract - (Show below) - (Hide below)

General Product Information - (Show below) - (Hide below)

Standards Referenced By This Book - (Show below) - (Hide below)

Standards Referencing This Book - (Show below) - (Hide below)

Add To Cart

Publisher

Category

Sub Category

Access your standards online with a subscription?